summaryrefslogtreecommitdiff
path: root/src/devices
AgeCommit message (Collapse)Author
2012-11-13cros: Inform U-Boot via fake gpio when VGA Option ROM is loadedBill Richardson
This prepares the way for vboot to inform coreboot when it needs the VGA Option ROM loaded. Coreboot can't always know when it's needed (with keyboard-based dev-mode, coreboot can't tell if we're in dev-mode or not). By the time we get to U-Boot, it's too late, so we need two extra bits - one for vboot to tell coreboot to load the Option ROM and another for coreboot to let vboot know it's been done. This change sets up the communication, but doesn't act on it just yet. Even with this CL we always load the VGA Option ROM, so there's nothing to test. There should be no user-visible change. Change-Id: Ic4e9673a3707b6605064f4879bb3e74d4412322f Signed-off-by: Bill Richardson <wfrichar@chromium.org> Reviewed-on: http://review.coreboot.org/1822 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12oprom: Ensure that mode information is valid before putting it in the tables.Gabe Black
At least when CONFIG_CHROMEOS is turned on, it's possible for CONFIG_FRAMEBUFFER_KEEP_VESA_MODE to be set but for there not to be any valid information to put into the framebuffer coreboot table. That means that what's put in there is junk, probably all zeroes from the uninitialized global variable the mode information is stored in (mode_info). When a payload uses libpayload and turns on the coreboot framebuffer console, that console will attempt to scroll at some point and decrease the cursor's y coordinate until it is less than the number of rows claimed by the console. The number of rows is computed by taking the vertical resolution of the framebuffer and dividing it by the height of the font. Because the mode information was all zeroes, the coreboot table info is all zeroes, and that means that the number of rows the console claims is zero. You can't get the unsigned y coordinate of the cursor to be less than zero, so libpayload gets stuck in an infinite loop. The solution this change implements is to add a new function, vbe_mode_info_valid, which simply returns whether or not mode_info has anything in it. If not, the framebuffer coreboot table is not created, and libpayload doesn't get stuck. Change-Id: I08f3ec628e4453f0cfe9e15c4d8dfd40327f91c9 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1758 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-08Make option rom init more verboseStefan Reinauer
When bringing up VGA by running the option rom it's sometimes useful to get more information about the mode that gets set, or the reason why the mode could not be set or a picture could not be displayed. Also prefix the output from VBE mode setting with VBE: Copying VGA ROM Image from fff0fd78 to 0xc0000, 0x10000 bytes Real mode stub @00000600: 867 bytes Calling Option ROM... int15_handler: INT15 function 5fac! ... Option ROM returned. VBE: Getting information about VESA mode 4161 VBE: resolution: 1280x1024@16 VBE: framebuffer: d0000000 VBE: Setting VESA mode 4161 VGA Option ROM has been loaded Change-Id: I2be11f095dc62ed3c99e0d4272ad9d6521608a44 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06Add name field for deviceKyösti Mälkki
The constant field "name" in chip_operations is common to multiple different devices within a chip and cannot reflect the actual device as found on the platform. The intention is that a driver sets dev->name as part of the device enumeration sequence with the detected hardware type and revision. The field is for debug print use only. Change-Id: Ib7bf90ba3c618ad0cb715d80d6a937ceaae0adcf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1634 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-29Hide all _ROM_RUN Kconfig options if the payload is SeaBIOSPeter Stuge
The options are shown regardless of payload if CONFIG_EXPERT is set. Change-Id: I12c81ce41a0e300e852481424eadc83f281863bf Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1638 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-29Run option ROMs in coreboot by default only if the payload is not SeaBIOSPeter Stuge
Change-Id: I29fb86ff3a3187b720ce5ef246c4eeee696ab5cd Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1637 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-29Clarify that _ROM_RUN Kconfig options control if ROMs are run by corebootPeter Stuge
Also clarify that enabling these options is generally not desirable if using SeaBIOS as payload since the option ROMs are run by SeaBIOS with more complete BIOS interrupt services available than coreboot. Change-Id: Ic4a45c351a4933aedad08d70a088eab04ca35b05 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1636 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-27Take care of NULL chip_ops->nameKyösti Mälkki
Change-Id: Ic44915cdb07e0d87962eff0744acefce2a4845a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1626 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-08Every chip must have chip_operationsKyösti Mälkki
Forcing this rule, chip_ops can be added in the static devicetree regardless of the existence of the chip.h files. Change-Id: Iec1c23484e85cab3f80a34f2b082088f38ac4de9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1472 Tested-by: build bot (Jenkins)
2012-10-07Revert order in VGA device choiceKostr
Before change "Simplify VGA card discovery" (http://review.coreboot.org/#/c/1255/) coreboot was setting up VGA for the last found VGA device. After this change it setting up VGA for the first found. This change broke compatibility to my Supermicro H8QGI board. Revert order back to old to save compatibility for this board (and maybe any other boards) Change-Id: Id5f2be60f95298059651c26133806e2694ff60aa Signed-off-by: Kostr <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/1561 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-05YABEL: Common API to register interrupt handlersPatrick Georgi
Provide (mostly) the same API for registering interrupt handlers as with x86emu. Change-Id: I1364b08d9043039550786a1758508ae088813aa3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1558 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-27AMD northbridges: factor out CPU allocationKyösti Mälkki
Factor CPU allocation out of AMD northbridge codes. As CPU topology information is required for generation of certain ACPI tables, make this code globally available. For AMDK8 and AMDFAM10 northbridge, there is a possible case of BSP CPU with lapicid!=0. We do not want to leave the lapic 0 from devicetree unused, so always use that node for BSP CPU. Change-Id: I8b1e73ed5b20b314f71dfd69a7b781ac05aea120 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1418 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-08Fix SMBIOS generationStefan Reinauer
Dropping mainboard's chip.h broke execution of the mainboard's enable function and the addition of mainboard specific smbios tables. The former was fixed by Kyosti in http://review.coreboot.org/1374 This patch fixes the breakage in static.c and also backs out a small portion of Kyosti's patch (because it's not needed anymore) Change-Id: I6fdea9cbb8c6041663bd36f68f1cae4b435c1f9b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1421 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-04Make the device tree available in the rom stageStefan Reinauer
We thought about two ways to do this change. The way we decided to try was to 1. drop all ops from devices in romstage 2. constify all devices in romstage (make them read-only) so we can compile static.c into romstage 3. the device tree "devices" can be used to read configuration from the device tree (and nothing else, really) 4. the device tree devices are accessed through struct device * in romstage only. device_t stays the typedef to int in romstage 5. Use the same static.c file in ramstage and romstage We declare structs as follows: ROMSTAGE_CONST struct bus dev_root_links[]; ROMSTAGE_CONST is const in romstage and empty in ramstage; This forces all of the device tree into the text area. So a struct looks like this: static ROMSTAGE_CONST struct device _dev21 = { #ifndef __PRE_RAM__ .ops = 0, #endif .bus = &_dev7_links[0], .path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}}, .enabled = 0, .on_mainboard = 1, .subsystem_vendor = 0x1ae0, .subsystem_device = 0xc000, .link_list = NULL, .sibling = &_dev22, #ifndef __PRE_RAM__ .chip_ops = &southbridge_intel_bd82x6x_ops, #endif .chip_info = &southbridge_intel_bd82x6x_info_10, .next=&_dev22 }; Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1398 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-03Fix mainboard level enable_dev()Kyösti Mälkki
Commit 188e3c2ff06a82f61d7d71e610b32b1a250c0a45 dropped mainboard out of the static device tree. This left dev_root->chip_ops unset, and mainboard_ops.enable_dev() was no longer called. Change-Id: I6d447c8049a66041b8bb36ec9aac3e7e0d20a99b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1374 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-02x86emu: fix jump_near_IMM to handle DATA: flag correctlyStefan Reinauer
Before (data flag ignored -> broken): 66 DATA: e944f1 JMP 1ff6 After (fixed): 66 DATA: e944f1ffff JMP 00001ff8 This subtle difference in the length of decoded instruction meant that the VBE call jumped to the routine setting AX=0x14F (VBE Failed) instead of the routine that set AX=0x4F (VBE success). The ability to run the same code in vm86 significantly aided the debugging of this issue. Those X.org developers who would like to drop vm86 better take special care towards _all_ vesa bugs, as those will expose further issues. Imported from: http://cgit.freedesktop.org/xorg/xserver/commit/hw/xfree86/x86emu?id=cc2c73ddcb4370a7c3ad439cda4da825156c26c9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Id08ead9b17468cf19ede45508e5dcc50e45b5acf Signed-off-by: Luc Verhaegen <libv@skynet.be> Tested-by: Luc Verhaegen <libv@skynet.be> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-on: http://review.coreboot.org/1365 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-08-02x86emu: Fix more mis-decoding of the data prefixStefan Reinauer
cc2c73ddcb4370a7c3ad439cda4da825156c26c9's three-cent titanium tax doesn't go too far enough. Fix the rest of the call and jmp instructions to handle the data prefix correctly. Reference: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 2A: Instruction Set Reference, A-M http://www.intel.com/Assets/PDF/manual/253666.pdf Imported from: http://cgit.freedesktop.org/xorg/xserver/commit/hw/xfree86/x86emu?id=bb18f277156c08be028a6e12d8987fb1593e9168 Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I83e6245d9748ee86722cfb7d8ac65258c35c013c Reviewed-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-on: http://review.coreboot.org/1366 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-08-02Remove uma_memory_base from build if no GFXUMAKyösti Mälkki
This patch validates the previous "drop uma_memory_base" patches; there are no more references to uma_memory_base when GFXUMA is not selected. Change-Id: I735b5e765b0c5cb4af1b4a7470cfe1af2bda7d38 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1385 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-02x86emu: Respect the LEA 67h address size prefixStefan Reinauer
From http://cgit.freedesktop.org/xorg/xserver/commit/hw/xfree86/x86emu?id=f57bc0ede8e018c7e264b917927c42a018cd1d5a Change-Id: Ibdcaa27e936464cec512edb46447aa6284a34975 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Christian Zander <chzander@nvidia.com> Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-on: http://review.coreboot.org/1364 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-27x86emu: Fix BSF and BSR instructionsStefan Reinauer
Patch courtesy of Michael Yaroslavtsev. Synced from Xorg http://cgit.freedesktop.org/xorg/xserver/commit/?id=66fa87292ef26bd0f464481287f3af992cd5741c Change-Id: I266f910d4a535eab4e2ad77f2540f2f1495bed61 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1360 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-27x86emu: fix comment for BTS instructionStefan Reinauer
Change-Id: Iacce58945f66213e75c7aac89541e785e80664cb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1363 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-27x86emu: Add an RDTSC implementation to the x86 emulatorStefan Reinauer
This instruction is being used in some debug VBIOSes. This implementation doesn't even try to be accurate. Instead, it just increments the counter by a fixed amount every time an rdtsc instruction in encountered, to avoid divides by zero. Imported from: http://cgit.freedesktop.org/xorg/xserver/commit/?id=c4b7e9d1c16797c3e4b1200b40aceab5696a7fb8 Change-Id: I8fba1a060c57ccb7bbd44aa321dd349bc56bf574 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1362 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-27Allocators for different memory regions typesKyösti Mälkki
Hide some details of the resource allocator from rest of the world. These should come in handy when fixing some aspects of MTRR setup. Change-Id: I8acad98f25e56cd8bae64fb52539d81ce94f9c73 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1367 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-27x86emu: Use NULL instead of 0 when assigning pointerStefan Reinauer
Change-Id: Ie79b9aa79d45dd10c2e5be7f58eed970c243060a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1361 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-25Remove useless semicolonPatrick Georgi
Change-Id: Idc4d5737f5b49108987ca7fe90410d4e80b723f2 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1354 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Mathias Krause <minipli@googlemail.com> Tested-by: build bot (Jenkins)
2012-07-22Simplify VGA card discoveryPatrick Georgi
We were handling vga, vga_first, vga_last, vga_onboard just to determine an onboard chip and the first plugin card. We were also traversing the devices manually instead of using the utility functions we have, for the chance that there are non-VGA cards we need to cope with (but why would they require VGA-style handling?) Change-Id: I8aa73aefa102725a64287f78a59de3d5dda1c7f2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1255 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20Allow shutting down internal graphics if plugin graphics are preferredPatrick Georgi
VGA is this part-legacy thing that can cause trouble... For this, introduce device_t->disable(dev) method, in which a driver can take care to deregister the device if necessary. Change-Id: I3fecec07f402e530458b79eda30b2c274101fefa Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1251 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20Allow YABEL to fake write accesses to config spacePatrick Georgi
A new Kconfig option tells YABEL to succeed on write accesses on other devices' config space without performing the actual write. This is enough for some basic bus modification done by some Option ROMs. Change-Id: Iab04f3a5c350b96654da4ba26858037f4c4b5c0a Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1249 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20Drop VGA_BRIDGE_SETUP config optionPatrick Georgi
It defaults to true, and isn't disabled anywhere in the tree. I also couldn't think of a case where it's actually useful. Change-Id: I126a47625d5294f3cfff225629f2a948a83c9b7e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1250 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-16Change uma_resource() to use new type IORESOURCE_UMA_FB.Kyösti Mälkki
MTRR setup code can detect this and mark it as UC/WT/WC as suitable for the specific hardware. Change-Id: Ib7a3d450fc7c19e3ca72767dfb350412dd35c971 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1214 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Add global uma_resource()Kyösti Mälkki
Like ram_resource(), but reserved and not cacheable. Switch all AMD northbridges to use this one. Change-Id: I88515c6a0f59f80fd8607c390d0d4a2a35d805f2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1203 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-13MPTAPLE: generate from devicetree.cbSven Schnelle
This patch adds support for autogenerating the MPTABLE from devicetree.cb. This is done by a write_smp_table() declared weak in mpspec.c. If the mainboard doesn't provide it's own function, this generic implementation is called. Syntax in devicetree.cb: ioapic_irq <APICID> <INTA|INTB|INTC|INTD> <INTPIN> The ioapic_irq directive can be used in pci and pci_domain devices. If there's no directive, the autogen code traverses the tree back to the pci_domain and stops at the first device which such a directive, and use that information to generate the entry according to PCI IRQ routing rules. Change-Id: I4df5b198e8430f939d477c14c798414e398a2027 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1138 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-10Use dev_lock for alloc_find_dev()Kyösti Mälkki
If threads called alloc_find_dev() with same device_path simultaneously, two device nodes could be allocated. This bug is not triggered by current code. Change-Id: Ifc87021c8d6f422901c5de5dd17392e3e2309afa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1188 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-05PCI Type2 config must dieRonald G. Minnich
PCI Type 2 config was a strange and never-used config mechanism. It is unlikely that in the 13 years of coreboot's existence that type 2 was ever used; it just made life complicated for everyone. It lived long enough in coreboot to be replaced by mmioconf. Prior to making the device tree visible in romstage we want to get rid of type2. Delete two files we don't need any more (yay!). Replace two functions with one: pci_config_default, which returns a pointer to the default config method. At some future time this may change to mmio but for now it is old type1 style. Change-Id: Icc4ccf379a89bfca8be43f305b68ab45d88bf0ab Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1159 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-05-01Allow device ID arrays in the PCI driver structureVadim Bendebury
Many PCI devices share the very same driver despite having different PCI device IDs, which causes a lot of copy and paste of driver definitions. This change introduces a way to specify the array of acceptable device IDs in a single driver entry. As an example the Intel {Sandy|Ivy} Bridge SATA driver is being modified to use a single driver structure for all different SATA controller flavors, a few more Ivy Bridge IDs are being added as well. BUG=none TEST=manual . modified coreboot brought up an Ivy Bridge platform all the way to Linux login screen. Change-Id: I761c5611b93ef946053783f7a755e6c456dd6991 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/982 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-28Reverse Vendor ID & Device ID for map_oprom_vendev()Martin Roth
- When calling map_oprom_vendev() the vendor ID and device ID are joined into a 32 bit value. They were reversed from the order that I would have expected - Device ID as the high 16 bits and the Vendor ID as the low 16. This patch reverses them so so that the the dword comparison in map_oprom_vendev() matches what's entered into Kconfig for vendor,device. - Change files calling map_oprom_vendev() Change-Id: I5b84db3cb1a359a7533409fde7d05fbc6ba3fcc4 Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/938 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-02x86, oprom: ensure DF is always clearedMathias Krause
The Option ROM might mess with the EFLAGS register and break assumptions the C part of coreboot implicitly has, e.g. the state of the direction flag. Prevent Option ROMs from confusing coreboot by restoring the old EFLAGS value after the Option ROMs has finished and always clear the direction flag before calling the C part of the interrupt handler. Change-Id: I84663be6681b17f95f48d93f0b730e443336b4a8 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/837 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-02[ChromeOS] Don't initialize VGA Option ROM in normal modeStefan Reinauer
ChromeOS features two different modes: normal mode and developer mode (aka jailbreak mode). In developer mode, we need to display a warning screen for security reasons. However, in normal mode we want to boot blazingly fast. Therefore we don't run (VGA) option ROMs, unless we have to print something on the screen before the kernel is loaded. Change-Id: I37f63d0b082a48e037e65bde2b380f9b8743ed29 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/829 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-02Add a helper function to determine the number of enabled CPUsStefan Reinauer
Change-Id: Ia72926002571e0f250849fa5db048bd8b2e92400 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/821 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Don't unconditionally add support for cardbus and pci-x devicesStefan Reinauer
It's still on by default. Change-Id: I8b6539eaf2f8d6a4fa975deb14789a00f2090d34 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/756 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Prepare the BIOS data areas before device init.Duncan Laurie
Since we do not run option roms in normal mode nothing was initializing the BDA/EBDA and yet Linux depends very much on it having sane values here. For the most part the kernel tries to work around this not being initialized, but every once in awhile (1/300 boots or so) it would end up reading something that looked sane from BDA but was not and then it would panic. In this change the EBDA is unconditionally setup before devices are initialized. I'm not set on the location in dev_initialize() but there does not seem to be another place to hook it in so that it runs just once for ALL platforms regardless of whether they use option roms or not. (possibly hardwaremain?) The EBDA setup code has been moved into its own location in arch/x86/lib/ebda.c so it can be compiled in even if the option rom code is not. The low memory size is still set to 1MB which is enough to make linux happy without having to hook into each mainboard to get a more appropriate value. The setup_ebda() function takes inputs so it could be changed for a mainboard if needed. OLD/BROKEN would read garbage. Examples from different boots: ebda_addr=0x75e80 lowmem=0x1553400 ebda_addr=0x5e080 lowmem=0x3e51400 ebda_addr=0x7aa80 lowmem=0x2f8a800 NEW/FIXED now reads consistent values: ebda_addr=0xf6000 lowmem=0x100000 Change-Id: I6cb79f0e3e43cc65f7e5fe98b6cad1a557ccd949 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/769 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29Add support for enabling PCIe Common Clock and ASPMDuncan Laurie
These are guarded by individual Kconfig entries. The deprecated CONFIG_PCIE_TUNING defines have been removed in favor of using specific config options. This is the generic half, there is board-specific pieces still to come that tune before and after ASPM is enabled. Change-Id: I3fe46282eada67629e9eeeed07e487dff54f2729 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/735 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-03-24printf: Remove some L modifier usesPatrick Georgi
We use the L modifier in a non-standard way (for long long instead of long double, which we have no business with). clang complains, to reduce its use, to make emulation/qemu-x86 happier. Long term, we should consider eliminating public uses of 'L' (but internal use in vtxprintf to denote long long is fine) Change-Id: If9a17d9ae9925cdc8736445e7d5eedc59c7028c6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/781 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-09Add helper function to find a Local APIC by ID in the device tree.Duncan Laurie
Change-Id: Ie2d7d8e1f647a0c92d2de09e32454fbea688b1e7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/695 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Don't try to compute I/O for empty sub buses.Stefan Reinauer
I am not sure if the sub bus being 0 is a problem, or if the assumption there has to be at least one non empty link is just wrong. It certainly does not hurt to add a small consistency check in either case. Change-Id: I098446deef96a8baae26a7ca1ddd96e626a06dc5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/693 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Don't run any Option ROMs stored outside of the system flashStefan Reinauer
Right now coreboot only executes VGA Option ROMs. However, this is not good enough. For security reasons we want to execute only Option ROMs stored in our r/o CBFS. This patch adds a new option to disable execution of arbitrary Option ROMs. Also fix the capitalization of Option ROM in src/devices/Kconfig Change-Id: I485291c06ec5cd1f875357401831fe32ccfc5f2f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/730 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-03-08Don't run VGA option ROMs on S3 resume.Stefan Reinauer
This will save us a few 100 ms on resume. Change-Id: Iabf4c8ab88662ba41236162f0a6f5bd80d8c1255 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/715 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-07Move C labels to start-of-linePatrick Georgi
Also mark the corresponding lint test stable. Change-Id: Ib7c9ed88c5254bf56e68c01cdbd5ab91cd7bfc2f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/772 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-23Revert "Fix multipleVGA cards resource conflict on Windows"Marc Jones
This reverts commit 8660a1aa56caeb31bfaf15464285ca650638515e This commit has been found to cause problems with vbios and option rom init in seabios. It has been found by several people and requires more analysis before being recommitted. Change-Id: Ie5f54e417e7a0d8bd8ca4c0a573976afeaa9e230 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/671 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Fix multipleVGA cards resource conflict on WindowsKerry Sheh
If multiple VGA-compatible legacy graphic cards decode the IO range 3B0-3BB, 3C0-3DF and MEM range A00000-BFFFF. Windows 7 complain a resource conflict, so only one VGA card can works at the same time. There is a discussion in coreboot mail list before, please reference thread: "how to prevent legacy resource conflictwith multipleVGA cards" http://www.coreboot.org/pipermail/coreboot/2010-October/061508.html Linux using VGA Arbiter module(vgaarb) to resolve this resource conflict, Please see the following linux dmesg log, more information can be found in Linux source dir Documentation/vgaarbiter.txt. But it seems that windows don't dealwith this conflict. ~# dmesg | grep -i vgaarb [ 0.774076] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem [ 0.776065] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,l [ 0.780051] vgaarb: loaded [ 0.784049] vgaarb: bridge control possible 0000:01:00.0 [ 0.788050] vgaarb: bridge control possible 0000:00:01.0 For the second legacy graphic device, coreboot already disabled the IO and MEM decode in function set_vga_bridge_bits(). But it will be enabled again in function pci_set_resource(), if the second legacy vga-compatible graphic device take any IO/MEM resources. Following log printed by enable_resources() shows the problem: ...snip... PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 subsystem <- 1022/1410 PCI: 00:01.0 cmd <- 07 <== The first graphic device PCI: 00:01.1 subsystem <- 1022/1410 PCI: 00:01.1 cmd <- 02 PCI: 00:02.0 bridge ctrl <- 0003 PCI: 00:02.0 cmd <- 07 ...snip... PCI: 01:00.0 cmd <- 03 <== The second graphic device PCI: 01:00.1 cmd <- 02 PCI: 02:00.0 cmd <- 02 PCI: 03:00.0 cmd <- 03 done. ...snip... The IO & MEM decoding on the second vga graphic device should be disabled. Please reference PCI spec. section 3.10 in detail. set_vga_bridge_bits() would do this work for us, it did the right thing, but was put to the wrong place, the setting would be overwritten by assign_resources() later. In order to make sure the set_vga_bridge_bits() setting not be overwritten by others, moving the call of set_vga_bridge_bits() to the end of dev_configure(), instead of at the beginning. This patch resolved the dual graphic cards resource conflict in windows7, multiple vga-compatible graphic cards can work together in windows7. Signed-off-by: Kerry Sheh <shekairui@gmail.com> Signed-off-by: Kerry Sheh <kerry.she@amd.com> Change-Id: I0de5e3761b51e2723d9c1dc0c39fff692e3a779d Reviewed-on: http://review.coreboot.org/489 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Add OPROM mapping support to corebootStefan Reinauer
This allows to add a PCI ID mapping function for option roms so that the same option rom can be used for a series of devices / PCI IDs. Intel and AMD often use the same option rom for a number of PCI devices with differend IDs. A function to implement such a mapping could look like this (or anything else appropriate): /* some vga option roms are used for several chipsets but they only have one * PCI ID in their header. If we encounter such an option rom, we need to do * the mapping ourselfes */ u32 map_oprom_vendev(u32 vendev) { u32 new_vendev=vendev; switch(vendev) { case 0xa0118086: new_vendev=0xa0018086; break; } return new_vendev; } Change-Id: I1be7fe113b895075d43ea48fe706b039cef136d2 Reviewed-on: http://review.coreboot.org/573 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-12-13Fix console output in real mode int10 implementation.Stefan Reinauer
Checking RBIL, int10 AH=0x10 does never output a character. The two output functions are AH=0x09 and AH=0x0e. Change-Id: Id7f4d260b63024748ef771f949e8b60f934bacbc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/483 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-21Use ntohll where appropriate.Stefan Reinauer
also clean out a local copy of ntohl in yabel. Change-Id: Iffe85a53c9ea25abeb3ac663870eb7eb4874a704 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/288 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-13Fix compilation of x86emu with gcc 4.6.xStefan Reinauer
gcc 4.6 complains about unused but set variables in x86emu. Particularly some variables are always set but only used in debug mode, or when FPU support is enabled. Change-Id: Ic53bd2303171ab717eb2d2c0ed72744d3eb6989e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/258 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Fix native x86 option rom initializationStefan Reinauer
- Intel option roms want an initialized i8259 or they will throw an exception 6. This should be done in the southbridge code, but that is executed much later than the VGA init, so initialize the i8259 in src/devices/oprom/x86.c. In the long run this will allow getting rid of some of the ugly hacks in some AMD boards' romstage.c - Don't overwrite the mode when copying mode info information back from 0x600. Change-Id: Idb01f13dbcd736d8d830b222ffe1ea85799fcd9c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/257 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13refactor vesa mode setting code and bootsplash codeStefan Reinauer
- adds possibility to set a vesa mode without showing a bootsplash - make bootsplash / mode setting code available in real mode. Change-Id: I0045c9d75757657f4ce531889593102ea1e39ce5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/256 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Refactor option rom initialization code in coreboot.Stefan Reinauer
- move int15 handler out of the generic code into the mainboard directories of those mainboards that actually use it. - move vbe headers to vbe.h - move function prototypes used in native oprom code to x86.h Change-Id: Idfff5e804ea328f7b5feebac72497c97329320ee Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/255 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-04-21more ifdef -> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21some ifdef --> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6535 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-03Wrap CONFIG_MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_ID in weak functionsPatrick Georgi
This is so that boards can determine them on runtime based on hardware properties, if so desired. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Joseph Kellermann <Joseph.Kellermann@heitec.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6329 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-31Fix an infinite loop in pnp_get_ioresource(), which freezes coreboot ifStefan Reinauer
a rare condition arises. Based on findings by Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6323 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-21Make YABEL warnings-are-errors safePatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6290 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-13Improve compatibility of YABEL with real-world VGABIOSesPatrick Georgi
Some of them do weird things to the option rom region (mapping registers there or so) which failed as we handled these memory region in emulation. As they were copied back to real memory after the emulation was done, we can just as well use real memory directly for these regions. This affects IVT, BDA, and option ROM space. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6251 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16don't hardcode CONFIG_PC80_SYSTEMStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6187 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Printing coreboot debug messages on VGA console is pretty much useless, sinceStefan Reinauer
initializing VGA happens pretty much as the last thing before starting the payload. Hence, drop VGA console support, as we did in coreboot v3. - Drop VGA and BTEXT console support. Console is meant to be debugging only, and by the time graphics comes up 99% of the risky stuff has already happened. Note: This patch does not remove hardware init but only the actual output functionality. The ragexl driver needs some extra love, but that's for another day - factor out die() and post() - drop some leftover RAMBASE < 0x100000 checks. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: QingPei Wang<wangqingpei@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-04Various cosmetic and coding style fixes in src/devices.Uwe Hermann
Also: - Improve a few code comments, fix typos, etc. - Change a few more variable types to u8/u16/u32 etc. - Make some very long lines fit into 80chars/line. - Drop a huge duplicated comment, use "@see" to refer to the other one. - Reduce nesting level a bit by restructuring some code chunks. - s/Config.lb/devicetree.cb/ in a few places. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6019 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18Cosmetics and coding style fixes in devices/*.Uwe Hermann
- Whitespace and indentation fixes in various places. - Fix various typos. - Use u8, u16 etc. everywhere. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17Various Doxygen comment fixes, typo fixes, etc.Uwe Hermann
- Fix incorrect argument names for @param entries. - Add missing @param and @return entries, partly as TODOs. - s/@returns/@return/, that's a typo. - Small whitespace fixes while I'm at it. - Drop useless @brief commands, they just clutter the comments and make them harder to read. Doxygen has an option to always use the first sentence of a Doxygen-comment as @brief automatically (should be on per default). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5955 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-11Factor out a few commonly duplicated functions from northbridge.c.Uwe Hermann
The following functions are moved to devices/device_util.c: - ram_resource() - tolm_test() - find_pci_tolm() There are only two tolm_test() / find_pci_tolm() which differ from the defaults, one of them can easily be eliminated in a follow-up patch, maybe even both, but for now keep it simple and only eliminate the majority. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5937 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-13Print an error and correct pci scan limits. Skip sb700 ISA DMA init if needed.Juhana Helovuo
Signed-off-by: Juhana Helovuo <juhe@iki.fi> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5805 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-09Make huge macros inline functions for readability. Remove warnings. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5797 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-09My Jmicron SATA card writes the name of the hard drive to the screen.Myles Watson
This redirects that output to the console and implements a basic keyboard stub. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5793 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07My Jmicron SATA card depends on the BIOS not clearing AL when setting AH.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5784 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07Make a Kconfig option for debugging output from realmode emulation. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5783 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-01Simplify last_dev_p so that it matches comments.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5763 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Make yabel work for non-zero bus numbers. The link_num is not the bus number.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5757 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-23mark unused variables in x86emu as unused. gcc has a mechanism for this.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5738 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17Clarify comment a bitPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5707 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-16Call mainboard init functions.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-17Always enable parent resources before child resources.Myles Watson
Always initialize parents before children. Move s2881 code into a driver. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-09Same conversion as with resources from static arrays to lists, exceptMyles Watson
there is no free list. Converting resource arrays to lists reduced the size of each device struct from 1092 to 228 bytes. Converting link arrays to lists reduced the size of each device struct from 228 to 68 bytes. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5626 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-07cardbus_scan_bridge is identical to pci_scan_bridgeMyles Watson
(since PCI_PRIMARY_BUS == PCI_CB_PRIMARY_BUS.) Remove it. Fix a typo while there. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5619 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-05tly cosmetical. don't use movw because we use mov in most places.Stefan Reinauer
Also, drop some dead code at the very end where some segment registers get set up and are immediately overwritten by pops. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-04This patch fixes the option rom code that was buggy when it switchedEdwin Beasant
segment registers before restoring register values. This was breaking the Geode VSA, and probably would have hurt other option roms as well. Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5612 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-04Enable PCI_OPTION_ROM_REALMODE when GEODE_VSA is selected.Myles Watson
Using YABEL isn't supported for the VSA, so don't allow a choice. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5608 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-02Fix hard-coded log levels.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5605 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-27fix warnings.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5594 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-23consistently use decimal for the register offsets, and fix comment typos.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5582 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-21Use lists instead of arrays for resources in devices to reduce memory usage.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5576 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-11Change real mode API to allow passing intXX number or entry point andStefan Reinauer
some register values from C. This theoretically fixes non-vga option roms, but it also allows to use the same assembler code for option roms and vsm. It will also make using the bootsplash without yabel a lot easier. Factor out and improve BDA setup, do some rom segment setup for those option roms that need it. Don't call the coreboot exception handler if an exception occurs in real mode. It's only partly usable, but mainly the Kontron 986LCD-M (and other i945GM boards) choke on an exception #6 (invalid opcode). This particular issue is not introduced by the changes in this patch but has been around for quite a while at least. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5543 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-26fix a bug in pcibios check. Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5502 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-24drop all duplicate copies of vgabios.c in favorStefan Reinauer
of devices/oprom/x86.c. We have some tests on hardware. Moving RAMBASE to 1MB needs to wait a bit until C7 cache_as_ram.inc has been adapted to cache that area or things will become incredibly slow (1.5s boot time instead of 0.5) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5488 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-22via epia-m now works with default x86.c instead of its own copy of vgabios.c.Stefan Reinauer
Allows to drop quite a bunch of nasty code Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5478 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1