summaryrefslogtreecommitdiff
path: root/src/devices/device.c
AgeCommit message (Collapse)Author
2004-05-14use #define macro for pci class idsLi-Ta Lo
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1563 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-05-10rename walk_static_devicesLi-Ta Lo
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1552 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-04-29changed dev->enable to dev->enabled. Sorry, I am the only one who can't speakLi-Ta Lo
English in the project. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1543 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-04-26check in the current code for IBM/E325, can somebody help to fix it ?Li-Ta Lo
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1538 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-23Doxidization, reformatLi-Ta Lo
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1469 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-11- Moved hlt() to it's own header.Eric Biederman
- Reworked pnp superio device support. Now complete superio support is less than 100 lines. - Added support for hard coding resource assignments in Config.lb - Minor bug fixes to romcc - Initial support for catching the x86 processor BIST error codes. I've only seen this trigger once in production during a very suspcious reset but... - added raminit_test to test the code paths in raminit.c for the Opteron - Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED so we can tell what we have really done. - Added generic AGP/IOMMU setting code to x86 - Added an implementation of memmove and removed reserved identifiers from memcpy - Added minimal support for booting on pre b3 stepping K8 cores - Moved the checksum on amd8111 boards because our default location was on top of extended RTC registers - On the Hdama added support for enabling i2c hub so we can get at the temperature sensors. Not that i2c bus was implemented well enough to make that useful. - Redid the Opteron port so we should only need one reset and most of memory initialization is done in cpu_fixup. This is much, much faster. - Attempted to make the VGA IO region assigment work. The code seems to work now... - Redid the error handling in amdk8/raminit.c to distinguish between a bad value and a smbus error, and moved memory clearing out to cpufixup. - Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to setup a legacy keyboard properly. - Reworked the register values for standard hardware, moving the defintions from chip.h into the headers of the initialization routines. This is much saner and is actually implemented. - Made the hdama port an under clockers BIOS. I debuged so many interesting problems. - On amd8111_lpc added setup of architectural/legacy hardware - Enabled PCI error reporting as much as possible. - Enhanded build_opt_tbl to generate a header of the cmos option locations so that romcc compiled code can query the cmos options. - In romcc gracefully handle function names that degenerate into function pointers - Bumped the version to 1.1.6 as we are getting closer to 2.0 TODO finish optimizing the HT links of non dual boards TODO make all Opteron board work again TODO convert all superio devices to use the new helpers TODO convert the via/epia to freebios2 conventions TODO cpu fixup/setup by cpu type git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-01-08Change PCI_BRIDGE_CONTROL to PCI_BRIDGE_CTL_VGALi-Ta Lo
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-11 - O2, enums, and switch statements work in romccEric Biederman
- Support for compiling romcc on non x86 platforms - new romc options -msse and -mmmx for specifying extra registers to use - Bug fixes to device the device disable/enable framework and an amd8111 implementation - Move the link specification to the chip specification instead of the path - Allow specifying devices with internal bridges. - Initial via epia support - Opteron errata fixes git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-30The epia now works.Ronald G. Minnich
Now to fix the ram ... git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02- Major update of the dynamic device tree so it can handleEric Biederman
* subtractive resources * merging with the static device tree * more device types than just pci - The piece to watch out for is the new enable_resources method that was needed in all of the drivers git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1096 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-08-04- Fix poor resource allocation estimate.Eric Biederman
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1066 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-07-21- First pass at s2880 support.Eric Biederman
- SMP cleanups (remove SMP only use CONFIG_SMP) - Minor tweaks to romcc to keep it from taking forever compiling - failover fixes - Get a good implementation of k8_cpufixup and sizeram for the opteron git-svn-id: svn://svn.coreboot.org/coreboot/trunk@998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-06-12- Modify the freebios tree so the pci config space api is mostly in sync betweenEric Biederman
code that runs without ram and code that runs with ram. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-04-24- Small step forward Linux boots and almost works...Eric Biederman
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@795 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-04-22- Initial checkin of the freebios2 treeEric Biederman
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@784 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 20:31:43 +0000