summaryrefslogtreecommitdiff
path: root/src/device
AgeCommit message (Collapse)Author
2020-04-10Drop unnecessary DEVICE_NOOP entriesNico Huber
Providing an explicit no-op function pointer is only necessary for `.read_resources` and `.set_resources`. All other device-operation pointers are optional and can be NULL. Change-Id: I3d139f7be86180558cabec04b8566873062e33be Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40206 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-05Drop explicit NULL initializations from `device_operations`Elyes HAOUAS
Unmentioned fields are initialized with 0 (or NULL) implicitly. Beside that, the struct has grown over the years. There are too many optional fields to list them all. Change-Id: Icb9e14c58153d7c14817bcde148e86e977666e4b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40126 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-04src/device: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: Id5fe26564147ec532850430ea55b19ee94d5c5a5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-31device/Kconfig: fix circular dependency for RUN_FSP_GOPMatt DeVillier
Change Graphics Init default for RUN_FSP_GOP to depend on INTEL_GMA_HAVE_VBT rather than INTEL_GMA_ADD_VBT, since RUN_FSP_GOP selects INTEL_GMA_ADD_VBT for several Intel SoC's. Test: create default config for gogle/cyan, RUN_FSP_GOP still default display init selection but no more circular dependency warning from config. Change-Id: I8b978d9938c3d0024d4dd40000b988430664cee7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-29src/device/Kconfig: Adjust Graphics init defaultsMatt DeVillier
Adjust the defaults for Graphics Initialization so that the "best" option for a board is selected by default. Net effect is to select RUN_FSP_GOP over VGA_ROM_RUN in cases where the platform supports GOP init and the mainboard has a VBT file included. Test: run 'make menuconfig' and check default Display Init option for google/cyan, observe RUN_FSP_GOP is default. Change-Id: I2184dbdd943d035d1682b3ae7bd8d005221434b1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-25Rework map_oprom_vendev to add revision check and mappingMartin Roth
AMD's Family 17h SoCs share the same video device ID, but may need different video BIOSes. This adds the common code changes to check the vendor & device IDs along with the revision and select the correct video BIOS to use. Change-Id: I2978a5693c904ddb09d23715cb309c4a356e0370 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/2040455 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-25src/device: Add option to look at revision in option romsMartin Roth
AMD's Family 17h SOCs have the same vendor and device IDs for their graphics blocks, but need different video BIOSes. The only difference is the revision number. Add a Kconfig option that allows us to add the revision number of the graphics device to the PCI option rom saved in CBFS. Because searching CBFS takes a non-trivial amount of time, only enable the option if it's needed. If it's not used, or if nothing matches, the check will fall through and search for an option rom with no version. BUG=b:145817712 TEST=With surrounding patches, loads dali vbios Change-Id: Icb610a2abe7fcd0f4dc3716382b9853551240a7a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/2013181 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-25arch/x86: Add Kconfig option for 2nd VGA BIOS imageMartin Roth
Picasso and Dali need different video bioses even though they use the same code in most other places. The Kconfig symbol names are changed from the downstream commit to make them more consistent with current coreboot code. BUG=b:145817712 TEST=Build Dali vBIOS into the coreboot image Change-Id: Ide0d061fda0abc78a74ddf97ba81fc3cf2b02e4f Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1956534 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-17src/device/pci_rom.c: Show device IDs on oprom failureMartin Roth
On a device/option-rom ID mismatch, the option rom's IDs would get shown twice instead of showing the actual device's IDs. This was very confusing because the error showed matching IDs. BUG=None TEST=Shows mismatched IDs when option rom doesn't match the hardware Change-Id: I5a06d6a7319aa653c8a5e32ec3c5afb651d83140 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2013180 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-03treewide: Replace BOARD_EMULATION_QEMU_X86Angel Pons
It is equivalent to the CPU_QEMU_X86 symbol. Change-Id: Ic16233e3d80bab62cc97fd075bdcca1780a6a2b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-02-24device/Kconfig: select linear framebuffer for TianocoreMatt DeVillier
Automatically select the linear framebuffer mode option if available when Tianocore selected as payload, since VGA text mode will not work properly with the default Tianocore payload. Change-Id: Ic36fd035526f3efd00ffa12ad613fbac304b18cf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-02-17treewide: capitalize 'BIOS'Elyes HAOUAS
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'. Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-08Add configurable ramstage support for minimal PCI scanningRonald G. Minnich
This CL has changes that allow us to enable a configurable ramstage, and one change that allows us to minimize PCI scanning. Minimal scanning is a frequently requested feature. To enable it, we add two new variables to src/Kconfig CONFIGURABLE_RAMSTAGE is the overall variable controlling other options for minimizing the ramstage. MINIMAL_PCI_SCANNING is how we indicate we wish to enable minimal PCI scanning. Some devices must be scanned in all cases, such as 0:0.0. To indicate which devices we must scan, we add a new mandatory keyword to sconfig It is used in place of on, off, or hidden, and indicates a device is enabled and mandatory. Mandatory devices are always scanned. When MINIMAL_PCI_SCANNING is enabled, ONLY mandatory devices are scanned. We further add support in src/device/pci_device.c to manage both MINIMAL_PCI_SCANNING and mandatory devices. Finally, to show how this works in practice, we add mandatory keywords to 3 devices on the qemu-q35. TEST= 1. This is tested and working on the qemu-q35 target. 2. On CML-Hatch Before CL: Total Boot time: ~685ms After CL: Total Boot time: ~615ms Change-Id: I2073d9f8e9297c2b02530821ebb634ea2a5c758e Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2020-02-05pciexp: Add support for allocating PCI express hotplug resourcesJeremy Soller
This change adds support for allocating resources for PCI express hotplug bridges when PCIEXP_HOTPLUG is selected. By default, this will add 32 PCI subordinate numbers (buses), 256 MiB of prefetchable memory, 8 MiB of non-prefetchable memory, and 8 KiB of I/O space to any device with the PCI_EXP_SLTCAP_HPC bit set in the PCI_EXP_SLTCAP register, which indicates hot-plugging capability. The resource allocation is configurable, please see the PCIEXP_HOTPLUG_* variables in src/device/Kconfig. In order to support the allocation of hotplugged PCI buses, a new field is added to struct device called hotplug_buses. This is defaulted to zero, but when set, it adds the hotplug_buses value to the subordinate value of the PCI bridge. This allows devices to be plugged in and unplugged after boot. This code was tested on the System76 Darter Pro (darp6). Before this change, there are not enough resources allocated to the Thunderbolt PCI bridge to allow plugging in new devices after boot. This can be worked around in the Linux kernel by passing a boot param such as: pci=assign-busses,hpbussize=32,realloc This change makes it possible to use Thunderbolt hotplugging without kernel parameters, and attempts to match closely what our motherboard manufacturer's firmware does by default. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I500191626584b83e6a8ae38417fd324b5e803afc Reviewed-on: https://review.coreboot.org/c/coreboot/+/35946 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01device/pnp_device: improve warning/error messagesFelix Held
Explicitly state that the assignment is missing in the devicetree. In the case of the warnings, the missing assignments might not be an issue. Change-Id: Ic0b2f19496c8b4cd6340b0b8a8d0155f8ad05a43 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-10src/device: Update pci_class to PCI-SIG SpecificationElyes HAOUAS
Update based on PCI-SIG's specification: "PCI code and ID assignment specification, Rev 1.11 (24 Jan 2019)" Change-Id: If51605719fd96e399aec2ae86caedda44f2648d4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-04device/smbus: Drop unused smbus_set_link()Kyösti Mälkki
I expect it to be easier to just remodel the support for i2c multiplexers instead. Besides, there was no proper bounds for pbus_num when accessing pbus_a[]. Change-Id: I17f33b308c01e48bc03b142550535c32862442ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-04device/smbus: Drop SMBUS_HAS_AUX_CHANNELSKyösti Mälkki
The guarded prototypes are no longer implemented in the tree. Change-Id: I5bfedde2aaf691826e7537eceb8578a855800ea2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-03device/Kconfig: make sure display can't be selected by accidentMichael Niewöhner
Make sure display can't be selected by accident when NO_GFX_INIT is selected. Change-Id: Iec5a47f84b8c776a45edc6f4b31a03b9ac714b4e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-31device: Log times with millisecond resolutionKyösti Mälkki
To print times with 1 us resolution just adds unnecessary noise when comparing logs across different boots. Furthermore, just the printk itself is 1 ms if some slow console is enabled. Change-Id: Ibea43124a1937f404a6e71fd9431086b2b72290a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-22superio/common/conf_mode: Add op to write SSDTPatrick Rudolph
Add functions to write ACPI SSDT code for entering and leaving the config mode. To be used by ACPI generators. Tested on Linux 5.2 using the Aspeed SSDT generator. Change-Id: I14b55b885f1c384536bafafed39ad399639868e4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-19device/pciexp: Match Max_Payload_Size between ends of a linkKyösti Mälkki
Ends of a PCIe link may advertise different Max_Payload_Size in their PCIe Express Capabilities, Device Capabilities block. For correct operation, both ends of the link need to have their Device Control Max_Payload_Size programmed to match and not exceed the other end's Device Capabilities. Fixes: https://ticket.coreboot.org/issues/218 Change-Id: I8b1de13e9c73abb30e5ccc792918bb4f81e5fe84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-12-19src/{drivers,device,ec}: Remove unused <stdlib.h>Elyes HAOUAS
Change-Id: I05422ee4b0aa5c02525ef0b4eccb4dc3ecf871e8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32822 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-16device/pnp: introduce and use PNP_SKIP_FUNCTIONFelix Held
-1 shouldn't be assigned to an unsigned variable, so use an otherwise unused constant here. Since 7 is the highest virtual LDN number, using 0xffff as PNP_SKIP_FUNCTION marker has no unwanted side effects. Change-Id: I5e31e7ef9dad5fedfd5552963c298336c533a5e9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-11printf: Automatically prefix %p with 0xJulius Werner
According to the POSIX standard, %p is supposed to print a pointer "as if by %#x", meaning the "0x" prefix should automatically be prepended. All other implementations out there (glibc, Linux, even libpayload) do this, so we should make coreboot match. This patch changes vtxprintf() accordingly and removes any explicit instances of "0x%p" from existing format strings. How to handle zero padding is less clear: the official POSIX definition above technically says there should be no automatic zero padding, but in practice most other implementations seem to do it and I assume most programmers would prefer it. The way chosen here is to always zero-pad to 32 bits, even on a 64-bit system. The rationale for this is that even on 64-bit systems, coreboot always avoids using any memory above 4GB for itself, so in practice all pointers should fit in that range and padding everything to 64 bits would just hurt readability. Padding it this way also helps pointers that do exceed 4GB (e.g. prints from MMU config on some arm64 systems) stand out better from the others. Change-Id: I0171b52f7288abb40e3fc3c8b874aee14b9bdcd6 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2019-12-09src/device: Fix typoElyes HAOUAS
Change-Id: Ibe99264a82fdea0e185907d2d2d4c57078ef3ae4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-11-22device/hypertransport: Drop unused codeArthur Heymans
Change-Id: I6a8b176fa6f8832f6f7bb37118861d530fdefd5e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37066 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-21device/pci: Reduce scope of dev_find_slot()Kyösti Mälkki
We only keep it around because soc/intel debugging still depends on it. Change-Id: I3ea37c097bbcc3cf5c0574c7d727eae4f5bee307 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-20device: Add back dummy HT_CHAIN_UNITID_BASEKyösti Mälkki
This should be defined by mainboard. Add a dummy default to fix master while HyperTransport files are still around referencing this. Change-Id: I58188a200a2cad5fa20affee1844117ba71ac338 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37036 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20nb/amd/fam10: Drop supportArthur Heymans
Relocatable ramstage, postcar stage and C_ENVIRONMENT_BOOTBLOCK are now mandatory features, which this platform lacks. Change-Id: If36ef0749dbb661f731fb04829bd7e2202ebb422 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-10arch/x86: Remove EARLY_EBDA_INIT supportArthur Heymans
This is unused now. Change-Id: Ie8bc1d6761d66c5e1dda40c34c940cdba90646d2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-01console/kconfig: Move ONBOARD_VGA_IS_PRIMARY to 'devices'Arthur Heymans
This has nothing to do with console options. This also improves the help text to reflect what it actually does. Change-Id: I039f4f6bbe144769d6a362192b225838ed3d9d43 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-29arch/x86/*.S: use defines instead of hardcoded valuesPatrick Rudolph
As preparation for x86_64 clean the assembly code and introduce arch/ram_segs.h similar to existing arch/rom_segs.h. Replace open coded segment values with the defines from the new header. Change-Id: Ib006cd4df59951335506b8153e9347450ec3403e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36321 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-27device: add Kconfig option to hide GOP initialization optionMichael Niewöhner
There are mainboards that do not have any graphics ports connected to the SoC. It would be senseless to initialize the iGD, thus add a new mainboard Kconfig to hide the GOP option. Change-Id: Ica3b3a7a0c8120c95412369a24d8d669fb59fded Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-27src/[arch-lib]: change "unsigned" to "unsigned int"Martin Roth
Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ibb7b48a7a144421aff29acbb7ac30968ae5fe5ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/36329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-27src/{device,drivers}: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Also, including <types.h>, is supposed to provide stdint and stddef. Change-Id: I99918a5a77e759bc7d4192d2c3fd6ad493c70248 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27src: Use 'include <boot/coreboot_tables.h>' when appropriateElyes HAOUAS
Change-Id: I3d90e46ed391ce323436750c866a0afc3879e2e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36359 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24arch/acpi.h: Use of typedef for acpi_vfctHimanshu Sahdev
Use of typedef and modify the usage accordingly. Change-Id: I875ef2fa31e65750233fa8da2b76d8db5db44f2d Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-10-24arch/acpi.h: Use of typedef for acpi_vfct_image_hdrHimanshu Sahdev
Use of typedef and modify the usage accordingly. Change-Id: I65581702a60dbd286cb3910c6eeef5f9e1853cf1 Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-10-21src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>'Elyes HAOUAS
Change-Id: I0c965e598e260ff8129aa07fb9fc5bf6e784e1d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
Change-Id: I2a94c3b6282e9915fd2b8136b124740c8a7b774c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-18src: Remove unused include '<device/pci_ids.h>'Elyes HAOUAS
Change-Id: Ic90dcff9d0b49a75a26556e4a1884a2954ef68f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36063 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-08device: Use scan_static_bus() over scan_lpc_bus()Nico Huber
Devices behind LPC can expose more buses (e.g. I2C on a super-i/o). So we should scan buses on LPC devices, too. Change-Id: I0eb005e41b9168fffc344ee8e666d43b605a30ba Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29474 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-08device/root_device: Consolidate common _scan_bus() functionsNico Huber
scan_usb_bus() and root_dev_scan_bus() had the very same implementation. So rename the latter to scan_static_bus() and use that for both cases. Change-Id: If0aba9c690b23e3716f2d47ff7a8c3e8f6d82679 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31901 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-08device/dram/ddr4: Check spd_bytes_total and spd_bytes_used valuesElyes HAOUAS
The value stored to 'spd_bytes_total' is never read. Now it is fixed. This is spotted using clang-tool v9. Also add a check if spd_bytes_used and/or spd_bytes_total are reserved and make sure that spd_bytes_used is not greater than spd_bytes_total. Change-Id: I426a7e64cc4c0bcced91d03387e02c8d965a21dc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-07src: Capitalize Super I/OElyes HAOUAS
Change-Id: I9ad9294dd2ae3e4a8a9069ac6464ad753af65ea5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-07device: Rename scan_static_bus() -> enable_static_devices()Nico Huber
The new name should reflect better what this function does, as that is only one specific step of the scanning. Change-Id: I9c9dc437b6117112bb28550855a2c38044dfbfa5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31900 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06device/pci: Enable full 16-bit VGA port i/o decodingNico Huber
So, the PCI to PCI bridge specification had a pitfall for us: Originally, when decoding i/o ports for legacy VGA cycles, bridges should only consider the 10 least significant bits of the port address. This means all VGA registers were aliased every 1024 ports! e.g. 0x3b0 was also decoded as 0x7b0, 0xbb0 etc. However, it seems, we never reserved the aliased ports, resulting in silent conflicts we preallocated resources. We neither use much external VGA nor many i/o ports these days, so nobody noticed. To avoid this mess, a bridge control bit (VGA16) was introduced in 2003 to enable decoding of 16-bit port addresses. As older systems seem rather safe and well tested, and newer systems should support this bit, we'll use it if possible and only warn if not. With old (AGP era) hardware one will likely encounter a warning like this: found VGA at PCI: 06:00.0 A bridge on the path doesn't support 16-bit VGA decoding! This is not generally fatal, but makes unnoticed resource conflicts more likely. Change-Id: Id7a07f069dd54331df79f605c6bcda37882a602d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35516 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04device/pci_device.c: Use verified boot to check opromFrans Hendriks
Before oprom is executed, no check is performed if rom passes verification. Add call to verified_boot_should_run_oprom() to verify the oprom. verified_boot_should_run_oprom() expects and rom address as input pointer. *rom is added as input parameter to should_run_oprom() which must be parsed to verified_boot_should_run_oprom().. BUG=N/A TEST=Created verified binary and verify logging on Facebook FBG1701 Change-Id: Iec5092e85d34940ea3a3bb1192ea49f3bc3e5b27 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-09-30device/pci_early: Drop some __SIMPLE_DEVICE__ useKyösti Mälkki
The simple PCI config accessors are always available under names pci_s_[read|write]_configX. We have some use for PCI bridge configurations and resets in romstages, so expose them. Change-Id: Ia97a4e1f1b4c80b3dae800d80615bdc118414ed3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30device/i2c_bus: Add i2c_dev_read_at16()Nico Huber
i2c_dev_read_at16() sends a 16-bit offset to the I2C chip (for larger EEPROM parts), then reads bytes up to a given length into a buffer. Change-Id: I7516f3e5d9aca362c2b340aa5627d91510c09412 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-30device,drivers/: Drop some __SIMPLE_DEVICE__ useKyösti Mälkki
The simple PCI config accessors are always available under names pci_s_[read|write]_configX. Change-Id: Ic1b67695b7f72e4f1fa29e2d56698276b15024e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-27device: add commentary to dev_find_slot()Aaron Durbin
dev_find_slot() can sometimes fail to return the desired device object prior to full PCI enumeration. Comment the declaration and implementation accordingly to help the user understand the problem and avoid its usage. Change-Id: I3fe1f24ff015d3e4f272323947f057e4c910186c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35632 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22device/cardbus: Remove unnecessary bridge_ctrl bitmaskKyösti Mälkki
The bits PARITY and SERR are set unconditionally below. Change-Id: I03f53fe7f436f8feed7b34756439077f02a85565 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-09-22device/cardbus: Fix use of PCI_CB_BRIDGE_CONTROLKyösti Mälkki
Read-modify-write needs to access the same register. Numerically both used defines are 0x3e, while register implementations are not identical but only similar. Change-Id: I9348b855320f86868e2d3ef76d3b8d7a4ab7fae0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-09-22device/pci: Replace add with bitwise-orKyösti Mälkki
Change-Id: I9fbefac3bef7425d6f5ea1bcc01eb21485315c36 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-17AUTHORS: Move src/device copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional cleanup - Unify "Inc" to "Inc." and "LLC." to "LLC" Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie03a3ce1f6085494bd5f38da76e2467970cf301a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-15{cpu,device,drivers}: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: I68da75e3afa2f66aff9961728d4a76bc3e175fce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33527 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15lib/coreboot_table: Show splashscreen in lb_table_initJohanna Schander
Every vga init implementation needs to cache the framebuffer state to be able to fill the lb_framebuffer struct later on in the fill_lb_framebuffer call. Showing the bootsplash afterwards guarantees to have the same interface into all the vga drivers. This is by far from ideal, as it only allows for a single driver at compile-time and should be adapted in the future. It was tested on the wip razer blade stealth using vgabios @ 1280x1024 and also in Qemu @ 1280x1024. By default the qemu framebuffer will be initialized in 800x600@32. This can be overwriten by configuration by setting CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_{X,Y}RES . Change-Id: I4bec06d22423627e8f429c4b47e0dc9920f1464e Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-08-26Split MAYBE_STATIC to _BSS and _NONZERO variantsKyösti Mälkki
These are required to cover the absensce of .data and .bss sections in some programs, most notably ARCH_X86 in execute-in-place with cache-as-ram. Change-Id: I80485ebac94b88c5864a949b17ad1dccdfda6a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-22Add buffer_to/from_fifo32(_prefix) helpersJulius Werner
Many peripheral drivers across different SoCs regularly face the same task of piping a transfer buffer into (or reading it out of) a 32-bit FIFO register. Sometimes it's just one register, sometimes a whole array of registers. Sometimes you actually transfer 4 bytes per register read/write, sometimes only 2 (or even 1). Sometimes writes need to be prefixed with one or two command bytes which makes the actual payload buffer "misaligned" in relation to the FIFO and requires a bunch of tricky bit packing logic to get right. Most of the times transfer lengths are not guaranteed to be divisible by 4, which also requires a bunch of logic to treat the potential unaligned end of the transfer correctly. We have a dozen different implementations of this same pattern across coreboot. This patch introduces a new family of helper functions that aims to solve all these use cases once and for all (*fingers crossed*). Change-Id: Ia71f66c1cee530afa4c77c46a838b4de646ffcfb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-20device/oprom: Drop unnecessary AMD headersKyösti Mälkki
Change-Id: I548dfa053f195b1ea87568240bf0041bb193d825 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-14dram: Add basic DDR4 SPD parsingAndrey Petrov
Add ability to decode basic fields of DDR4 SPDs and produce SMBIOS table 17. XMP, schemas, extended field parising is totally not yet implemented. Also, put CRC function used in DDR2, DDR3 and DDR4 ina common file. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: If3befbc55cf37e1018baa432cb2f03743b929211 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-08-02device/pci_ops: Make PCI_BDF() available in all stagesKyösti Mälkki
Caller needs to take into account that bus numbers may have not been assigned yet. Same issue existed before with early ramstage and mostly does not cause problems when used with static devices on bus 0. Change-Id: I4865b4277dbc858c8c2ffd2052defcaa1a92173c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34614 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31device: Constify `dev` argument to (probe|find)_resource()Nico Huber
Change-Id: I7abca61db61d2f2df149ca601631c45d8c4f342e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34613 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26src/device/oprom: Fix bootsplash display code for optionromsJohanna Schander
So far the bootsplash is only correctly rendered if the framebuffer is set up as 1024x768@16. Different resolutions did not show anything, differnent depth resulted in the distorted images. This commit removes this limit by using the actual framebuffer resolutions and combines the code for x86 and yabel. For the moment the bootsplash is still limited to VGA-OptionROM framebuffer init. It was tested in 1280x1024@32 on the wip razer blade stealth using the intel vgabios. Change-Id: I5ab7b8a0f28badaa16e25dbe807158870d06e26a Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34537 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26oprom/yabel: Fix comment to fix the buildKyösti Mälkki
Old comment did not match the pattern required to not flag the fall-through as an error. Change-Id: I2afaca969c295a5dc4389dad0ce898c87bb841a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Johanna Schander <coreboot@mimoja.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-24device: Default to VESA/linear framebuffer for ChromeOSNico Huber
Building for ChromeOS implies the use of Depthcharge which doesn't support legacy text mode. Change-Id: I7fd82bfed1e59de2de75419cfaea6f0c19cfdf5e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34483 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19device/device_util.c: Correct format specifierJacob Garber
path.mmio.addr is a uintptr_t, which is an unsigned long. Change-Id: I5e43e0ab65cf59819abe1dde43143ff98e4553b0 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402110 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19device/oprom: List all supported vesa mode by opromSubrata Banik
This patch lists all supported vesa mode by oprom using Function 0x4F00 (return vbe controller information). This information might be useful for user to select correct vesa mode for oprom. TEST=Enabling external pcie based graphics card on ICLRVP Case 1: with unsupported vesa mode 0x118 Now coreboot will show below msg to user to know there is a potential issue with choosen vesa mode and better users know the failure rather going to depthcharge and debug further. Calling Option ROM... ... Option ROM returned. VBE: Getting information about VESA mode 4118 VBE: Function call invalid with unsupported video mode 0x118! User to select mode from below list - Supported Video Mode list for OpRom are: 0x110 0x111 0x113 0x114 0x116 0x117 0x119 0x11a 0x165 0x166 0x121 0x122 0x123 0x124 0x145 0x146 0x175 0x176 0x1d2 0x1d4 Error: In vbe_get_mode_info function Case 2: with supported vesa mode 0x116 Calling Option ROM... ... Option ROM returned. VBE: Getting information about VESA mode 4116 VBE: resolution: 1024x768@16 VBE: framebuffer: a0000000 VBE: Setting VESA mode 4116 VGA Option ROM was run Change-Id: I02cba44374bc50ec3ec2819c97b6f5027c58387f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34284 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19device/pci_rom.c: Fix out of bounds readJacob Garber
run_rom->data is a uint16_t, so use the appropriate read function. Change-Id: Icc14421412885495df90c90ed7da6e7d2eba4182 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402145 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34372 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18device/oprom/realmode: Add vbe return status support as per VBE spec 3.0Subrata Banik
Existing coreboot oprom implementation relies on user selected vesa mode through CONFIG_FRAMEBUFFER_VESA_MODE Kconfig option and expects that all oprom might support user selected vesa mode. Take an example: Enabling AMD external radeon PCIE graphics card on ICLRVP with default vesa mode 0x118. Unable to get valid X and Y resolution after executing vbe_get_mode_info() with 0x4118, return data buffer shows 0x0 resolution. It causes further hang while trying to draw bmpblk image at depthcharge. This patch checks for output register AH in all vbe function (0x3 and 0x4f00/1/2) and die() if returns error. Change-Id: Iacd2ce468e038a14424f029df3a0adec3e5fa15c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-18devicetree: Add accessors for chip_infoKyösti Mälkki
Apply uniform style of error messages for missing device nodes and chip_info. Change-Id: I70def4599509b8193e44ea3f02c4906f865b4469 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-17soc/intel: Fix regression with hidden PCI devicesKyösti Mälkki
Fix regression with commit 903b40a soc/intel: Replace uses of dev_find_slot() Platforms where FSP hides PCI devices before enumeration may halt with error message 'PCI: dev is NULL!'. The workaround here is to print an error message revealing the faulty source code function and revert to old behaviour of dev_find_slot(). Change-Id: I5eab3e7f1993b686103eaa257aacda379dc259fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34285 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-15device: Remove device->ops from early stagesKyösti Mälkki
Change-Id: I7a361187570716df94a3fd441ae78c0f805b1dda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33921 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13device/hypertransport.c: Remove dead assignmentJacob Garber
last_unitid is immediately overwritten in the do loop, so this assignment is not needed. This a relic from old code that commit 13f1c2af8b made obsolete, but was never removed. Change-Id: I2eecddd025f7a64b0a70fc07a61ebb43aba757d6 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: scan-build 8.0.0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-13device/device_util: Fix encoding the USB device pathKarthikeyan Ramasubramanian
USB device id does not get included because of the logical OR operation. Fix encoding the USB device path. BUG=None BRANCH=None TEST=Boot to ChromeOS. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I79317da6d9c7cd177bd7bbbba1f1ccebe076930a Reviewed-on: https://review.coreboot.org/c/coreboot/+/34245 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12device/oprom: Replace uses of dev_find_slot()Kyösti Mälkki
The call to dev_find_slot() may return PCI devices that are disabled or unaccessible, as PCI enumeration does not remove nodes from all_devices linked list. Use PCI topology search instead. Change-Id: I00233177e5572ca79002a7d141cda1b94b966330 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34083 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12device/pci: Declare pcidev_path_on_bus()Kyösti Mälkki
It is recommended to never reference PCI busses using a static number. There is exception with OPROM execution, where we want to translate the bus number captured from the actual IO operation into a matching device node in the devicetree. Change-Id: I733c645ac5581c000b4cd6cdc05829cd039324d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-12device/pci: Replace use of dev_find_slot() for IRQsKyösti Mälkki
Change-Id: I48c0de73338430282ce1a4442bbeb7c867dc174c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-10device/oprom: Replace CONFIG() preprocessor statementsKyösti Mälkki
Change-Id: I7737b5f2a5c2598af68f2bca769232413f343a39 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-07-10device/oprom: Reduce indentationKyösti Mälkki
Change-Id: Iadae9221f7ea549e91cdc501155de058c51a982c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-07-07device/pci: Declare pci_root_bus()Kyösti Mälkki
This is used a lot, cache the result so search of domain from devicetree is only done once. Improvement only applies when MAYBE_STATIC evaluates to static. Change-Id: If675abb632fe68acd59ba0bdfef854da3e0839a9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-05device/pci_rom.c: Fix indent for 'if' statementElyes HAOUAS
Change-Id: Ie9adb60323742d379cc4ad0af069a793b9ddd79b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33330 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04device/pci_ops: Define pci_find_capability() just onceKyösti Mälkki
Wrap the simple romstage implementation to be called from ramstage. Change-Id: Iadadf3d550416850d6c37233bd4eda025f4d3960 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31755 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02device/pci_rom: Fix redundant pci_rom_probe() callsKyösti Mälkki
For the PCI_VENDOR_ID_ATI case, we can rely on pci_rom_acpi_fill_vfct() to make the call if necessary. For hardware other than ATI, pci_rom_probe() was already called from pci_rom_ssdt() and pci_dev_init(), so PCI_ROM_ADDRESS BAR is already enabled, if requested so. Change-Id: I0ea893a9ac7ba480840ebf5570d8fe0d9e20938f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-07-02device/pci_rom: Fix on-board optionrom addressKyösti Mälkki
The function pci_rom_probe() may be called multiple times for a device. For cases where CBFS does not contain optionrom file, only the first time probing for the on-board ROM chip worked. PCI_ROM_ADDRESS_ENABLE is set on the first run. Mask out all the reserved bits of PCI_ROM_ADDRESS register to get correct physical address for rom_header. Change-Id: I14374954af09201494bf2f13e5a6e4dc640c05ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-06-28device: Tidy up add_more_links()Jacob Garber
- Add documentation comment - Use 'unsigned int' to make checkpatch happy - Return early if no more links need to be added - Add error handling if malloc fails - Clean up whitespace Change-Id: I70976ee2539b058721d0ae3c15edf279253cd9b7 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229634 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33238 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28device,nb/amd: Deduplicate add_more_links()Jacob Garber
This function is duplicated in many AMD northbridge files, and all the definitions have started to diverge somewhat. This moves a single copy into device utils and deletes the rest. The function definition from nb/amd/amdfam10 was chosen to be kept, since it contains several fixes from commit 59d609217b (AMD fam10: Fix add_more_links) that the others don't have. For the ease of diffing, the checkpatch lints and other small cleanups will be done in a follow-up patch. Change-Id: I5ea73126092449db3f18e19ac0660439313072de Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33237 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28device/dram: Inline value into print statementJacob Garber
By default printram() expands to nothing in normal builds, and so scan-build thinks that the assignment to reg8 is unused. Inline the value of reg8 into the print statement to silence the warning. Change-Id: I921fe08949c4135367bee9646b3b365097fab19e Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: scan-build 8.0.0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21device/pci_rom: use ALIGN_UP instead of ALIGN for better readabilityFelix Held
Change-Id: Icb0b3fd22fa9b6ea73b7770079f81335e40fd0d3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-14device/cpu_device.c: Use 'unsigned int' instead of 'unsigned'Elyes HAOUAS
Change-Id: I9f96d8c8e6cf2715e62ab3715da83740db8cce40 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Vlado Cibic
2019-06-03src/device: Prevent attack on null pointer dereferenceJohn Zhao
Clang Static Analyzer version 8.0.0 detects access to field dev results in a dereference of a null pointer which is loaded from variable bus. Add sanity check for pointer bus to prevent null pointer dereference. TEST=Built and boot up to kernel. Change-Id: I084906c33065eaa834f50c545efcfab620658ec9 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-29src/{device,drivers}: Add missing 'include <types.h>'Elyes HAOUAS
<types.h> is supposed to provide <stdint.h> and <stddef.h>. So when <types.h> is included, <stdint.h> and/or <stddef.h> is removed. Change-Id: I3395715f9e2b03175089186ab2e57d9e508fc87c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-15vboot: remove OPROM-related codeJoel Kitching
As of CL:1605641, vboot2 code should be used for setting and checking display init state. Remove all vboot1 OPROM-related code, and use the vboot2 display init code which has already been added in previous commits. coreboot should not be reading vboot NVRAM flags directly. Remove the function vboot_wants_oprom(), and instead rely on display_init_required(), which uses the VBOOT_WD_FLAG_DISPLAY_INIT value stored in vboot_working_data.flags, initialized during verstage. Note that this means in the case of CONFIG_VBOOT=y, the return value of display_init_required() can only be trusted after verstage has been executed. This should not be a problem assuming that all display initialization occurs in ramstage. BUG=b:124141368, b:124192753, chromium:948529 TEST=Build locally TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic8f9dc5a3c7f1546a8fed82bde02be4d04568f8d Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1605641, chromium:1605525 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32723 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-07device: ignore NONE devices behind bridgePatrick Rudolph
Ignore NONE devices in dev_is_active_bridge that are commonly used to indicate hotplug capable ports. Tested on Lenovo T520: The empty ExpressCard Slot is no longer marked as active bridge. Change-Id: I23347270aaab17647023969091ce4bcdd41dd57a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-05-02x86emu: add console.h header to fix compilationMartin Kepplinger
Commit 351e3e5 ("src: Use include <console/console.h> when appropriate") has broken the build here, see below, so we include console.h here again. In file included from src/device/oprom/x86emu/x86emui.h:65, from src/device/oprom/x86emu/debug.c:40: src/device/oprom/x86emu/debug.c: In function 'x86emu_dump_regs': src/device/oprom/x86emu/debug.h:46:22: error: implicit declaration of function 'printk'; did you mean 'printf'? [-Werror=implicit-function-declaration] #define printf(x...) printk(BIOS_DEBUG, x) ^~~~~~ src/device/oprom/x86emu/debug.c:366:5: note: in expansion of macro 'printf' printf("\tAX=%04x ", M.x86.R_AX ); ^~~~~~ Fixes: 351e3e5 ("src: Use include <console/console.h> when appropriate") Change-Id: I75d0b7c08bfa6dcb07778bbb762223b62cfc3da7 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-25device/dram/ddr3: Remove unused variableElyes HAOUAS
'param' variable is unused because 'printram' function only expands to something in debug builds (not default ones). Change-Id: I0cdf34cbb9aaed5045db5294eeefeaac642aeb1a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32428 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
Change-Id: Iddba5b03fc554a6edc4b26458d834e47958a6b08 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:46:46 +0000