summaryrefslogtreecommitdiff
path: root/src/device
AgeCommit message (Collapse)Author
2019-10-07device: Rename scan_static_bus() -> enable_static_devices()Nico Huber
The new name should reflect better what this function does, as that is only one specific step of the scanning. Change-Id: I9c9dc437b6117112bb28550855a2c38044dfbfa5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31900 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06device/pci: Enable full 16-bit VGA port i/o decodingNico Huber
So, the PCI to PCI bridge specification had a pitfall for us: Originally, when decoding i/o ports for legacy VGA cycles, bridges should only consider the 10 least significant bits of the port address. This means all VGA registers were aliased every 1024 ports! e.g. 0x3b0 was also decoded as 0x7b0, 0xbb0 etc. However, it seems, we never reserved the aliased ports, resulting in silent conflicts we preallocated resources. We neither use much external VGA nor many i/o ports these days, so nobody noticed. To avoid this mess, a bridge control bit (VGA16) was introduced in 2003 to enable decoding of 16-bit port addresses. As older systems seem rather safe and well tested, and newer systems should support this bit, we'll use it if possible and only warn if not. With old (AGP era) hardware one will likely encounter a warning like this: found VGA at PCI: 06:00.0 A bridge on the path doesn't support 16-bit VGA decoding! This is not generally fatal, but makes unnoticed resource conflicts more likely. Change-Id: Id7a07f069dd54331df79f605c6bcda37882a602d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35516 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04device/pci_device.c: Use verified boot to check opromFrans Hendriks
Before oprom is executed, no check is performed if rom passes verification. Add call to verified_boot_should_run_oprom() to verify the oprom. verified_boot_should_run_oprom() expects and rom address as input pointer. *rom is added as input parameter to should_run_oprom() which must be parsed to verified_boot_should_run_oprom().. BUG=N/A TEST=Created verified binary and verify logging on Facebook FBG1701 Change-Id: Iec5092e85d34940ea3a3bb1192ea49f3bc3e5b27 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-09-30device/pci_early: Drop some __SIMPLE_DEVICE__ useKyösti Mälkki
The simple PCI config accessors are always available under names pci_s_[read|write]_configX. We have some use for PCI bridge configurations and resets in romstages, so expose them. Change-Id: Ia97a4e1f1b4c80b3dae800d80615bdc118414ed3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30device/i2c_bus: Add i2c_dev_read_at16()Nico Huber
i2c_dev_read_at16() sends a 16-bit offset to the I2C chip (for larger EEPROM parts), then reads bytes up to a given length into a buffer. Change-Id: I7516f3e5d9aca362c2b340aa5627d91510c09412 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-30device,drivers/: Drop some __SIMPLE_DEVICE__ useKyösti Mälkki
The simple PCI config accessors are always available under names pci_s_[read|write]_configX. Change-Id: Ic1b67695b7f72e4f1fa29e2d56698276b15024e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-27device: add commentary to dev_find_slot()Aaron Durbin
dev_find_slot() can sometimes fail to return the desired device object prior to full PCI enumeration. Comment the declaration and implementation accordingly to help the user understand the problem and avoid its usage. Change-Id: I3fe1f24ff015d3e4f272323947f057e4c910186c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35632 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22device/cardbus: Remove unnecessary bridge_ctrl bitmaskKyösti Mälkki
The bits PARITY and SERR are set unconditionally below. Change-Id: I03f53fe7f436f8feed7b34756439077f02a85565 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-09-22device/cardbus: Fix use of PCI_CB_BRIDGE_CONTROLKyösti Mälkki
Read-modify-write needs to access the same register. Numerically both used defines are 0x3e, while register implementations are not identical but only similar. Change-Id: I9348b855320f86868e2d3ef76d3b8d7a4ab7fae0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-09-22device/pci: Replace add with bitwise-orKyösti Mälkki
Change-Id: I9fbefac3bef7425d6f5ea1bcc01eb21485315c36 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-17AUTHORS: Move src/device copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional cleanup - Unify "Inc" to "Inc." and "LLC." to "LLC" Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie03a3ce1f6085494bd5f38da76e2467970cf301a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-15{cpu,device,drivers}: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: I68da75e3afa2f66aff9961728d4a76bc3e175fce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33527 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15lib/coreboot_table: Show splashscreen in lb_table_initJohanna Schander
Every vga init implementation needs to cache the framebuffer state to be able to fill the lb_framebuffer struct later on in the fill_lb_framebuffer call. Showing the bootsplash afterwards guarantees to have the same interface into all the vga drivers. This is by far from ideal, as it only allows for a single driver at compile-time and should be adapted in the future. It was tested on the wip razer blade stealth using vgabios @ 1280x1024 and also in Qemu @ 1280x1024. By default the qemu framebuffer will be initialized in 800x600@32. This can be overwriten by configuration by setting CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_{X,Y}RES . Change-Id: I4bec06d22423627e8f429c4b47e0dc9920f1464e Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-08-26Split MAYBE_STATIC to _BSS and _NONZERO variantsKyösti Mälkki
These are required to cover the absensce of .data and .bss sections in some programs, most notably ARCH_X86 in execute-in-place with cache-as-ram. Change-Id: I80485ebac94b88c5864a949b17ad1dccdfda6a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-22Add buffer_to/from_fifo32(_prefix) helpersJulius Werner
Many peripheral drivers across different SoCs regularly face the same task of piping a transfer buffer into (or reading it out of) a 32-bit FIFO register. Sometimes it's just one register, sometimes a whole array of registers. Sometimes you actually transfer 4 bytes per register read/write, sometimes only 2 (or even 1). Sometimes writes need to be prefixed with one or two command bytes which makes the actual payload buffer "misaligned" in relation to the FIFO and requires a bunch of tricky bit packing logic to get right. Most of the times transfer lengths are not guaranteed to be divisible by 4, which also requires a bunch of logic to treat the potential unaligned end of the transfer correctly. We have a dozen different implementations of this same pattern across coreboot. This patch introduces a new family of helper functions that aims to solve all these use cases once and for all (*fingers crossed*). Change-Id: Ia71f66c1cee530afa4c77c46a838b4de646ffcfb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-20device/oprom: Drop unnecessary AMD headersKyösti Mälkki
Change-Id: I548dfa053f195b1ea87568240bf0041bb193d825 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-14dram: Add basic DDR4 SPD parsingAndrey Petrov
Add ability to decode basic fields of DDR4 SPDs and produce SMBIOS table 17. XMP, schemas, extended field parising is totally not yet implemented. Also, put CRC function used in DDR2, DDR3 and DDR4 ina common file. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: If3befbc55cf37e1018baa432cb2f03743b929211 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-08-02device/pci_ops: Make PCI_BDF() available in all stagesKyösti Mälkki
Caller needs to take into account that bus numbers may have not been assigned yet. Same issue existed before with early ramstage and mostly does not cause problems when used with static devices on bus 0. Change-Id: I4865b4277dbc858c8c2ffd2052defcaa1a92173c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34614 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31device: Constify `dev` argument to (probe|find)_resource()Nico Huber
Change-Id: I7abca61db61d2f2df149ca601631c45d8c4f342e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34613 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26src/device/oprom: Fix bootsplash display code for optionromsJohanna Schander
So far the bootsplash is only correctly rendered if the framebuffer is set up as 1024x768@16. Different resolutions did not show anything, differnent depth resulted in the distorted images. This commit removes this limit by using the actual framebuffer resolutions and combines the code for x86 and yabel. For the moment the bootsplash is still limited to VGA-OptionROM framebuffer init. It was tested in 1280x1024@32 on the wip razer blade stealth using the intel vgabios. Change-Id: I5ab7b8a0f28badaa16e25dbe807158870d06e26a Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34537 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26oprom/yabel: Fix comment to fix the buildKyösti Mälkki
Old comment did not match the pattern required to not flag the fall-through as an error. Change-Id: I2afaca969c295a5dc4389dad0ce898c87bb841a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Johanna Schander <coreboot@mimoja.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-24device: Default to VESA/linear framebuffer for ChromeOSNico Huber
Building for ChromeOS implies the use of Depthcharge which doesn't support legacy text mode. Change-Id: I7fd82bfed1e59de2de75419cfaea6f0c19cfdf5e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34483 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19device/device_util.c: Correct format specifierJacob Garber
path.mmio.addr is a uintptr_t, which is an unsigned long. Change-Id: I5e43e0ab65cf59819abe1dde43143ff98e4553b0 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402110 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19device/oprom: List all supported vesa mode by opromSubrata Banik
This patch lists all supported vesa mode by oprom using Function 0x4F00 (return vbe controller information). This information might be useful for user to select correct vesa mode for oprom. TEST=Enabling external pcie based graphics card on ICLRVP Case 1: with unsupported vesa mode 0x118 Now coreboot will show below msg to user to know there is a potential issue with choosen vesa mode and better users know the failure rather going to depthcharge and debug further. Calling Option ROM... ... Option ROM returned. VBE: Getting information about VESA mode 4118 VBE: Function call invalid with unsupported video mode 0x118! User to select mode from below list - Supported Video Mode list for OpRom are: 0x110 0x111 0x113 0x114 0x116 0x117 0x119 0x11a 0x165 0x166 0x121 0x122 0x123 0x124 0x145 0x146 0x175 0x176 0x1d2 0x1d4 Error: In vbe_get_mode_info function Case 2: with supported vesa mode 0x116 Calling Option ROM... ... Option ROM returned. VBE: Getting information about VESA mode 4116 VBE: resolution: 1024x768@16 VBE: framebuffer: a0000000 VBE: Setting VESA mode 4116 VGA Option ROM was run Change-Id: I02cba44374bc50ec3ec2819c97b6f5027c58387f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34284 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19device/pci_rom.c: Fix out of bounds readJacob Garber
run_rom->data is a uint16_t, so use the appropriate read function. Change-Id: Icc14421412885495df90c90ed7da6e7d2eba4182 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402145 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34372 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18device/oprom/realmode: Add vbe return status support as per VBE spec 3.0Subrata Banik
Existing coreboot oprom implementation relies on user selected vesa mode through CONFIG_FRAMEBUFFER_VESA_MODE Kconfig option and expects that all oprom might support user selected vesa mode. Take an example: Enabling AMD external radeon PCIE graphics card on ICLRVP with default vesa mode 0x118. Unable to get valid X and Y resolution after executing vbe_get_mode_info() with 0x4118, return data buffer shows 0x0 resolution. It causes further hang while trying to draw bmpblk image at depthcharge. This patch checks for output register AH in all vbe function (0x3 and 0x4f00/1/2) and die() if returns error. Change-Id: Iacd2ce468e038a14424f029df3a0adec3e5fa15c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-18devicetree: Add accessors for chip_infoKyösti Mälkki
Apply uniform style of error messages for missing device nodes and chip_info. Change-Id: I70def4599509b8193e44ea3f02c4906f865b4469 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-17soc/intel: Fix regression with hidden PCI devicesKyösti Mälkki
Fix regression with commit 903b40a soc/intel: Replace uses of dev_find_slot() Platforms where FSP hides PCI devices before enumeration may halt with error message 'PCI: dev is NULL!'. The workaround here is to print an error message revealing the faulty source code function and revert to old behaviour of dev_find_slot(). Change-Id: I5eab3e7f1993b686103eaa257aacda379dc259fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34285 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-15device: Remove device->ops from early stagesKyösti Mälkki
Change-Id: I7a361187570716df94a3fd441ae78c0f805b1dda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33921 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13device/hypertransport.c: Remove dead assignmentJacob Garber
last_unitid is immediately overwritten in the do loop, so this assignment is not needed. This a relic from old code that commit 13f1c2af8b made obsolete, but was never removed. Change-Id: I2eecddd025f7a64b0a70fc07a61ebb43aba757d6 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: scan-build 8.0.0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-13device/device_util: Fix encoding the USB device pathKarthikeyan Ramasubramanian
USB device id does not get included because of the logical OR operation. Fix encoding the USB device path. BUG=None BRANCH=None TEST=Boot to ChromeOS. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I79317da6d9c7cd177bd7bbbba1f1ccebe076930a Reviewed-on: https://review.coreboot.org/c/coreboot/+/34245 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12device/oprom: Replace uses of dev_find_slot()Kyösti Mälkki
The call to dev_find_slot() may return PCI devices that are disabled or unaccessible, as PCI enumeration does not remove nodes from all_devices linked list. Use PCI topology search instead. Change-Id: I00233177e5572ca79002a7d141cda1b94b966330 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34083 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12device/pci: Declare pcidev_path_on_bus()Kyösti Mälkki
It is recommended to never reference PCI busses using a static number. There is exception with OPROM execution, where we want to translate the bus number captured from the actual IO operation into a matching device node in the devicetree. Change-Id: I733c645ac5581c000b4cd6cdc05829cd039324d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-12device/pci: Replace use of dev_find_slot() for IRQsKyösti Mälkki
Change-Id: I48c0de73338430282ce1a4442bbeb7c867dc174c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-10device/oprom: Replace CONFIG() preprocessor statementsKyösti Mälkki
Change-Id: I7737b5f2a5c2598af68f2bca769232413f343a39 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-07-10device/oprom: Reduce indentationKyösti Mälkki
Change-Id: Iadae9221f7ea549e91cdc501155de058c51a982c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-07-07device/pci: Declare pci_root_bus()Kyösti Mälkki
This is used a lot, cache the result so search of domain from devicetree is only done once. Improvement only applies when MAYBE_STATIC evaluates to static. Change-Id: If675abb632fe68acd59ba0bdfef854da3e0839a9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-05device/pci_rom.c: Fix indent for 'if' statementElyes HAOUAS
Change-Id: Ie9adb60323742d379cc4ad0af069a793b9ddd79b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33330 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04device/pci_ops: Define pci_find_capability() just onceKyösti Mälkki
Wrap the simple romstage implementation to be called from ramstage. Change-Id: Iadadf3d550416850d6c37233bd4eda025f4d3960 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31755 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02device/pci_rom: Fix redundant pci_rom_probe() callsKyösti Mälkki
For the PCI_VENDOR_ID_ATI case, we can rely on pci_rom_acpi_fill_vfct() to make the call if necessary. For hardware other than ATI, pci_rom_probe() was already called from pci_rom_ssdt() and pci_dev_init(), so PCI_ROM_ADDRESS BAR is already enabled, if requested so. Change-Id: I0ea893a9ac7ba480840ebf5570d8fe0d9e20938f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-07-02device/pci_rom: Fix on-board optionrom addressKyösti Mälkki
The function pci_rom_probe() may be called multiple times for a device. For cases where CBFS does not contain optionrom file, only the first time probing for the on-board ROM chip worked. PCI_ROM_ADDRESS_ENABLE is set on the first run. Mask out all the reserved bits of PCI_ROM_ADDRESS register to get correct physical address for rom_header. Change-Id: I14374954af09201494bf2f13e5a6e4dc640c05ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2019-06-28device: Tidy up add_more_links()Jacob Garber
- Add documentation comment - Use 'unsigned int' to make checkpatch happy - Return early if no more links need to be added - Add error handling if malloc fails - Clean up whitespace Change-Id: I70976ee2539b058721d0ae3c15edf279253cd9b7 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229634 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33238 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28device,nb/amd: Deduplicate add_more_links()Jacob Garber
This function is duplicated in many AMD northbridge files, and all the definitions have started to diverge somewhat. This moves a single copy into device utils and deletes the rest. The function definition from nb/amd/amdfam10 was chosen to be kept, since it contains several fixes from commit 59d609217b (AMD fam10: Fix add_more_links) that the others don't have. For the ease of diffing, the checkpatch lints and other small cleanups will be done in a follow-up patch. Change-Id: I5ea73126092449db3f18e19ac0660439313072de Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33237 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28device/dram: Inline value into print statementJacob Garber
By default printram() expands to nothing in normal builds, and so scan-build thinks that the assignment to reg8 is unused. Inline the value of reg8 into the print statement to silence the warning. Change-Id: I921fe08949c4135367bee9646b3b365097fab19e Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: scan-build 8.0.0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21device/pci_rom: use ALIGN_UP instead of ALIGN for better readabilityFelix Held
Change-Id: Icb0b3fd22fa9b6ea73b7770079f81335e40fd0d3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-14device/cpu_device.c: Use 'unsigned int' instead of 'unsigned'Elyes HAOUAS
Change-Id: I9f96d8c8e6cf2715e62ab3715da83740db8cce40 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Vlado Cibic
2019-06-03src/device: Prevent attack on null pointer dereferenceJohn Zhao
Clang Static Analyzer version 8.0.0 detects access to field dev results in a dereference of a null pointer which is loaded from variable bus. Add sanity check for pointer bus to prevent null pointer dereference. TEST=Built and boot up to kernel. Change-Id: I084906c33065eaa834f50c545efcfab620658ec9 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-29src/{device,drivers}: Add missing 'include <types.h>'Elyes HAOUAS
<types.h> is supposed to provide <stdint.h> and <stddef.h>. So when <types.h> is included, <stdint.h> and/or <stddef.h> is removed. Change-Id: I3395715f9e2b03175089186ab2e57d9e508fc87c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-15vboot: remove OPROM-related codeJoel Kitching
As of CL:1605641, vboot2 code should be used for setting and checking display init state. Remove all vboot1 OPROM-related code, and use the vboot2 display init code which has already been added in previous commits. coreboot should not be reading vboot NVRAM flags directly. Remove the function vboot_wants_oprom(), and instead rely on display_init_required(), which uses the VBOOT_WD_FLAG_DISPLAY_INIT value stored in vboot_working_data.flags, initialized during verstage. Note that this means in the case of CONFIG_VBOOT=y, the return value of display_init_required() can only be trusted after verstage has been executed. This should not be a problem assuming that all display initialization occurs in ramstage. BUG=b:124141368, b:124192753, chromium:948529 TEST=Build locally TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic8f9dc5a3c7f1546a8fed82bde02be4d04568f8d Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1605641, chromium:1605525 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32723 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-07device: ignore NONE devices behind bridgePatrick Rudolph
Ignore NONE devices in dev_is_active_bridge that are commonly used to indicate hotplug capable ports. Tested on Lenovo T520: The empty ExpressCard Slot is no longer marked as active bridge. Change-Id: I23347270aaab17647023969091ce4bcdd41dd57a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-05-02x86emu: add console.h header to fix compilationMartin Kepplinger
Commit 351e3e5 ("src: Use include <console/console.h> when appropriate") has broken the build here, see below, so we include console.h here again. In file included from src/device/oprom/x86emu/x86emui.h:65, from src/device/oprom/x86emu/debug.c:40: src/device/oprom/x86emu/debug.c: In function 'x86emu_dump_regs': src/device/oprom/x86emu/debug.h:46:22: error: implicit declaration of function 'printk'; did you mean 'printf'? [-Werror=implicit-function-declaration] #define printf(x...) printk(BIOS_DEBUG, x) ^~~~~~ src/device/oprom/x86emu/debug.c:366:5: note: in expansion of macro 'printf' printf("\tAX=%04x ", M.x86.R_AX ); ^~~~~~ Fixes: 351e3e5 ("src: Use include <console/console.h> when appropriate") Change-Id: I75d0b7c08bfa6dcb07778bbb762223b62cfc3da7 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-25device/dram/ddr3: Remove unused variableElyes HAOUAS
'param' variable is unused because 'printram' function only expands to something in debug builds (not default ones). Change-Id: I0cdf34cbb9aaed5045db5294eeefeaac642aeb1a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32428 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
Change-Id: Iddba5b03fc554a6edc4b26458d834e47958a6b08 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-09src: Fix remaining #include <timer.h>Nico Huber
Follow-up to add76f91d5 (src: Use #include <timer.h> when appropriate). Change-Id: I7813daa0b73039ec76d33a16ce3ae0ce6cc7f2cc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-04-07device/pci: Rewrite PCI MMCONF with symbol referenceKyösti Mälkki
The effect of pointer aliasing on writes is that any data on CPU registers that has been resolved from (non-const and non-volatile) memory objects has to be discarded and resolved. In other words, the compiler assumes that a pointer that does not have an absolute value at build-time, and is of type 'void *' or 'char *', may write over any memory object. Using a unique datatype for MMIO writes makes the pointer to _not_ qualify for pointer aliasing with any other objects in memory. This avoid constantly resolving the PCI MMCONF address, which is a derived value from a 'struct device *'. Change-Id: Id112aa5e729ffd8015bb806786bdee38783b7ea9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31752 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-02vboot: Change oprom checks to CONFIG_VBOOT, assert OPROM_MATTERSJulius Werner
Skipping display init on normal-mode boot is a vboot feature, not specific to Chrome OS. Fix the code in display_init_required() and pci_dev_init() to check CONFIG_VBOOT rather than CONFIG_CHROMEOS now that the two aren't always the same anymore. Also add a check to guarantee at compile time that CONFIG_VBOOT_OPROM_MATTERS is enabled on all platforms that make a check to this function (when CONFIG_VBOOT is also enabled). The whole display skipping mechanism is based on the oprom_needed NVRAM flag, and skipping display init without enabling the option to tell vboot that it needs to pay attention to that flag would make the whole thing not work right. Change-Id: I5d6421509bdcdaa61b78015af3fa6241fe75bb7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-27drivers/intel/gma: Make libgfxinit available w/o gfxinitNico Huber
We might want to make use of libgfxinit functions without using it for actual graphics init. Change-Id: I29c3b19989acb678d0d447e83d38bad9d584caa9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31455 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-25Fix up remaining boolean uses of CONFIG_XXX to CONFIG(XXX)Julius Werner
This patch cleans up remaining uses of raw boolean Kconfig values I could find by wrapping them with CONFIG(). The remaining naked config value warnings in the code should all be false positives now (although the process was semi-manual and involved some eyeballing so I may have missed a few). Change-Id: Ifa0573a535addc3354a74e944c0920befb0666be Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-21device/pci_device: Add generic subsystem programming logicSubrata Banik
This patch adds generic log to perform subsystem programming based on header type. Type 0: subsystem offset 0x2C Type 2: subsystem offset 0x40 Type 1: Read CAP ID 0xD to know cap offset start, offset 4 to locate subsystem vendor id. Change-Id: Id8aed6dac24517e93cd55d6bb3b254b7b4d950d3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Guckian Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-21{northbridge, soc, southbridge}/intel: Make use of pci_dev_set_subsystem()Subrata Banik
This patch removes local definitions of sub_system function and make use of common function pci_dev_set_subsystem(). Change-Id: I91982597fdf586ab514bec3d8e4d09f2565fe56d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Guckian Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-17resources: introduce io_resource()Subrata Banik
This patch creates new resource function to perform allocation of IO resource, similar to mmio_resource() function does for MMIO. Change-Id: I3fdcabb14302537d6074bfd6a362690c06b66bb5 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-16device/pci_ops: Have only default PCI bus ops availableKyösti Mälkki
In the current state of the tree we do not utilise the mechanism of having per-device overrides for PCI bus ops. This change effectively inlines all PCI config accessors for ramstage as well. Change-Id: I11c37cadfcbef8fb5657dec6d620e6bccab311a4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-03-16device/pci_ops: Reuse romstage PCI config for ramstageKyösti Mälkki
By changing the signatures we do not need to define PCI config accessors separately for ramstage. Change-Id: I9364cb34fe8127972c772516a0a0b1d281c5ed00 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-16src: Drop unused 'include <device/pciexp.h>'Elyes HAOUAS
Change-Id: I9b4d72116a66d5a256659fa82682497ef3481e77 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-13device/pci_ops: Rename 'where' to 'reg'Kyösti Mälkki
One could understand 'where' as bus, device, function or register. Make it clear it is register. Change-Id: I95d0330ba40510e48be70ca1d8f58aca66c8f695 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-13device/pci_ops: Unify signaturesKyösti Mälkki
Use fixed width types and const pointers for dev. Change-Id: Ide3b70238479ad3e1869ed22aa4fa0f1ff8aa766 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-07src/device/Kconfig: Include the discrete VGA OpROM at config UIMike Banon
Create the way of adding the discrete VGA OpROM at config UI (alternative to ./cbfstool ./cb.rom add -f vgabios_dgpu.bin -n pci1002,6663.rom -t optionrom ) DGPU options are accessible only if CONFIG_VGA_BIOS is enabled. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I0a7bf0fe95c833cf3df0c7cb20fc27b6ab218c5a Reviewed-on: https://review.coreboot.org/c/coreboot/+/31449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-06device/pci_ops: Inline PCI config accessors for ramstageKyösti Mälkki
Inlining here allows the check for (dev != NULL) to be optimised and evaluated just once inside the calling function body. Change-Id: I0b5b4f4adb8eaa483a31353324da19917db85f4a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-06device/pci_ops: Change ramstage PCI accessor signaturesKyösti Mälkki
This reduces parameter passing and visibility of parsing struct *dev to PCI bus:dev.fn. Change-Id: Ie4232ca1db9cffdf21ed133143acfb7517577736 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-06device/pci_ops: Simplify logic for PCI bus opsKyösti Mälkki
Nobody ever sets ops_pci_bus. This implies pci_bus_ops() always returns pci_bus_default_ops() and get_pbus returns NULL. Change-Id: Ia30d579e1efe6542dc58714f2e7077507847c0de Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31684 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
MMIO operations are arch-agnostic so the include path should not be arch/. Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-03device/pci: Organize MakefileKyösti Mälkki
Use a single group for all CONFIG_PCI=y sources. Change-Id: I426f4398c01dfbf03b9dd2db8c7a964512c86d5e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31680 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-03device/pci_ops: Drop parameter from pci_bus_default_ops()Kyösti Mälkki
A default is a build-time static value, fallback. Return value does not depend of input parameter. Change-Id: I43ae28f465fb46391519ec97a2a50891d458c46d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31679 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-03device/pci_ops: Drop unused parameterKyösti Mälkki
Drop the bus parameter, we do not use it. It would still be possible to do per-bus selection by evaluating the bus number, but currently we do not have need for that either. Change-Id: I09e928b4677d9db2eee12730ba7b3fdd8837805c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
PCI config accessors are no longer indirectly included from <arch/io.h> use <device/pci_ops.h> instead. Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-02-25src/device/Kconfig: Change default VESA mode from 117h to 118hMike Banon
Change default VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console) from 117h (1024x768 64k-color (5:6:5)) to 118h (1024x768 16.8M-color (8:8:8)) mode. This provides console output at Lenovo G505S even if e.g. GRUB is the payload, while it is unlikely to cause any downsides for the other boards. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ia348199bbd430532b1399706dd84490c9680b5f5 Reviewed-on: https://review.coreboot.org/c/31595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-02-11device/pci_ops: Apply some symmetry in headersKyösti Mälkki
To make PCI driver side arch-agnostic, function declarations have to be in symmetrical header file locations. From the driver side, the correct file to include is now <device/pci_ops.h> Change-Id: I8076a4867fd7472beaae0a021dcf0d9c7c905871 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-11device/pci_ops: Move questionable pci_locate() variantsKyösti Mälkki
These are defined for __SIMPLE_DEVICE__ when PCI enumeration has not happened yet. These should not really try to probe devices other than those on bus 0. It's hard to track but there maybe cases of southbridge being located on bus 2 and available for configuration, so I rather leave the code unchanged. Just move these out of arch/io.h because they cause build failures if one attempts to include <arch/pci_ops.h> before <arch/io.h>. There are two direct copies for ROMCC bootblocks to avoid inlining them elsewhere. Change-Id: Ida2919a5d83fe5ea89284ffbd8ead382e4312524 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-02-11device/pci_early.c: Drop some guardsKyösti Mälkki
With PCI_DEV() always defined it is no longer necessary to exclude this code from building. Change-Id: I58a6348750d240aa6024599f7b1af1449f31e8ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-02-06libgfxinit: Add options to limit framebuffer sizeNico Huber
Add maximum width and height options and set the default to 2560x1600 (WQXGA). The framebuffer will be scaled up to the displays' native resolutions. So this should help with tiny fonts on high-DPI displays. For laptops, reasonable defaults can be set at the mainboard level. Change-Id: I47fba063629260c3a2854caf7a73f1a1e933d063 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-27src: Fix the warning "type 'hex' are always defined"Elyes HAOUAS
This is spotted using "./util/lint/kconfig_lint" While at it, do the check in C and not the preprocessor. Change-Id: Icfda267936a23d9d14832116d67571f42f685906 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-10device/pci_device: Do not break tree topologyKyösti Mälkki
Fix regression introduced with commit ad7674e device: Introduce pcidev_on_root() and friends Function pci_scan_bus() breaks bus->children link in the devicetree topology while scanning a bus. While the scan is in progress, accessing PCI devices with number higher than what is being probed was not possible because new pcidev_on_root() relies on having proper topology present at any time. Change-Id: I7bb497f7390628dd2f0310b380f199783a888c4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-08amdfam10 boards: Fix regression on dev_find_slot() removalKyösti Mälkki
For these platforms, the first PCI node on devicetree is not the root of PCI bus hierarchy, and the topology (bus->children and dev->sibling links) are getting manipulated during HyperTransport enumeration. This workaround reverts back to old dev_find_slot() with its bad semantics. Change-Id: I19745c3070c12e562ffab2f0243c9d91dd051c72 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-07src: Use "foo **bar" instead of "foo ** bar"Elyes HAOUAS
Change-Id: I8260424ee243c06827f2b5939e1568e52539b282 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-01-07src: Move constant to the right side of comparisonElyes HAOUAS
Change-Id: I76d35a3643600f81a6da7e0af99c935ebd1c2fc7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/27015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-04device: Introduce pcidev_on_root() and friendsKyösti Mälkki
Semantics of dev_find_slot() are ill in the sense that it only works after device enumeration has completed in ramstage. Plan is to declare it as deprecated. Introduce pcidev_on_root() and pcidev_path_on_root() functions to replace cases where this was called with static argument bus == 0. New implementation only walks the root bus of the PCI tree, while old one walked the entire linked list of devices. Introduce pcidev_path_behind() to replace cases where argument bus != 0. The required parent node is typically one of the PCIe root functions that you locate using pcidev_on_root() above. New forms are safe to use with early devicetree and before PCI bus numbers have been assigned. Change-Id: Ie20598d48b4cf6e35e45fc90804bad4728437fc6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-12-30device/pci_early: Fixes for __SIMPLE_DEVICE__Kyösti Mälkki
The feature is used to enable PCI MMIO accesses behind PCIe links (or bridges) before PCI enumeration has been completed. Add the feature for bootblock, verstage and postcar, it is required with add-on PCIe serial cards for early console output. It's up to the board specific code to configure PCIe root port prior to calling console_init() for this to work. Remove feature from ramstage, it bypasses any resource allocations and bus number assignments. For the moment PCI configuration support before ramstage is available only on ARCH_X86. Also switch from device_t to pci_devfn_t. Change-Id: I08acec68b6f17f4d73d30039cc41274492ea4f45 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-21cpu/amd/geode_lx: Drop supportArthur Heymans
These chips are still using LATE_CBMEM which was agreed upon to be removed after release 4.7. It is now more than 1 year later and they still linger around. The work and review to bring this code up to date can happen on the 4.9 branch and then squashed together and merged back into mainline when done. Change-Id: I11290a5e92397b9b7e7e5a19b029278e728671a3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-19{device,drivers}: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: Ib96bf7d48711f518e36f8d12244b5749d84a0f68 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-18Fix typos involving "the the"Jonathan Neuschäfer
Change-Id: I179264ee6681a7ba4488b9f1c6bce1a19b4e1772 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-30arch/power8: Rename to ppc64Jonathan Neuschäfer
POWER8 is a specific implementation of ppc64, which is by now outdated (POWER9 has been on the market for a while). Rename arch/power8/ to potentially cover a wider range of hardware. TEST=Toolchains built before/after this commit can build coreboot for emulation/qemu-power8 from before/after this commit. Change-Id: I2d6f08b12a9ffc8a652ddcd6f24ad85ecb33ca52 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2018-11-19src: Add required space after "switch"Elyes HAOUAS
Change-Id: I85cf93e30606bc7838852bd300a369e79370629a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Remove unneeded include <lib.h>Elyes HAOUAS
Change-Id: I801849fb31fe6958e3d9510da50e2e2dd351a98d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-23{device,drivers}: Use 'unsigned int' to bare use of 'unsigned'Elyes HAOUAS
Change-Id: Iebb043a6fbc5803fbb7cad2f35b43917e10d09d4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28700 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22reset: Provide new single-function reset APINico Huber
board_reset() replaces the existing common reset API. There is no common distinction between reset types across platforms, hence, common code could never decide which one to call. Currently only hard_reset() is used by common code. We replace these calls and provide a fall-back to the current hard_reset() implemen- tation. The fall-back will be removed along with hard_reset() after the transition of all boards. Change-Id: I274a8cee9cb38226b5a0bdff6a847c74ef0b3128 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>