summaryrefslogtreecommitdiff
path: root/src/device
AgeCommit message (Collapse)Author
2022-02-16device: Add support for PCIe Resizable BARsTim Wawrzynczak
Section 7.8.6 of the PCIe spec (rev 4) indicates that some devices can indicates support for "Resizable BARs" via a PCIe extended capability. When support this capability is indicated by the device, the size of each BAR is determined in a different way than the normal "moving bits" method. Instead, a pair of capability and control registers is allocated in config space for each BAR, which can be used to both indicate the different sizes the device is capable of supporting for the BAR (powers-of-2 number of bits from 20 [1 MiB] to 63 [8 EiB]), and to also inform the device of the size that the allocator actually reserved for the MMIO range. This patch adds a Kconfig for a mainboard to select if it knows that it will have a device that requires this support during PCI enumeration. If so, there is a corresponding Kconfig to indicate the maximum number of bits of address space to hand out to devices this way (again, limited by what devices can support and each individual system may want to support, but just like above, this number can range from 20 to 63) If the device can support more bits than this Kconfig, the resource request is truncated to the number indicated by this Kconfig. BUG=b:214443809 TEST=compile (device with this capability not available yet), also verify that no changes are seen in resource allocation for google/brya0 before and after this change. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I14fcbe0ef09fdc7f6061bcf7439d1160d3bc4abf Reviewed-on: https://review.coreboot.org/c/coreboot/+/61215 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-02-10device: Add pciexp_find_next_extended_cap functionTim Wawrzynczak
Some PCIe devices have extended capability lists that contain multiples instances of the same capability. This patch provides a function similar to pciexp_find_extended_cap that can be used to search through multiple instances of the same capability by returning the offset of the next extended capability of the given type following the passed-in offset. The base functionality of searching for a given capability from an offset is extracted to a local helper function and both pciexp_find_extended_cap and pciexp_find_next_extended_cap use this helper. Change-Id: Ie68dc26012ba57650484c4f2ff53cc694a5347aa Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-02-08device/dram/ddr2.c: Fix log messagesElyes HAOUAS
Change 'printk(BIOS_WARNING, "ERROR:' to printk(BIOS_ERR, "'. Change-Id: Id25bdb1e6b6d7085eff9c2be8263223a91dff061 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-07treewide: Remove "ERROR: "/"WARN: " prefixes from log messagesJulius Werner
Now that the console system itself will clearly differentiate loglevels, it is no longer necessary to explicitly add "ERROR: " in front of every BIOS_ERR message to help it stand out more (and allow automated tooling to grep for it). Removing all these extra .rodata characters should save us a nice little amount of binary size. This patch was created by running find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';' and doing some cursory review/cleanup on the result. Then doing the same thing for BIOS_WARN with 's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi' Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-01-26src: Add missing 'void' in function definitionElyes HAOUAS
Change-Id: I7fa1f9402b177a036f08bf99c98a6191c35fa0b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-24device: constify pciexp_find_extended_cap()Tim Wawrzynczak
The object pointed to by the struct device * argument is not modified, therefore it can be made const. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I300d2a59eb0513ddd08d4f1d2a3c6eb829e3f836 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-17oprom/yabel/io.c: Fix building for ENV_X86_64Arthur Heymans
Unknown if yabel works for X86_64 but now it builds. Change-Id: Iacdb9fde91a992b5010120f5824383ca4aebdd1a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-17oprom/realmode/x86.c: Fix building for ENV_X86_64Arthur Heymans
Not tested on hardware. Change-Id: I8ce8d56da326aeff5ff9b400ded02d4309372519 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-12device/pci_device.c: Make sure the PCI bus has a deviceArthur Heymans
Some SOC add PCI root busses structs at runtime without adding a device struct to the bus because pci_scan_bus does it. An example would be xeon_sp which has multiple root busses. TEST: ocp/deltalake boots again. Change-Id: I81d9c94652e34dbf9e8cec64fc34ef0042563037 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2022-01-05device/dram/lpddr4.c: Remove unused <string.h>Elyes HAOUAS
Change-Id: Iba3135178f2d6021702971e4d887e9b4f8afeb76 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-01pci_device.c: Don't guard `pci_dev_disable_bus_master()`Angel Pons
The `pci_dev_disable_bus_master()` function doesn't need to be guarded with `CONFIG(PC80_SYSTEM)`, so move it out of the guard. Change-Id: I813e0f72c3c624c73ab9ecbe7512359608ace927 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-22device: Make pciexp_get_ltr_max_latencies a public functionTim Wawrzynczak
Some device drivers may need to get access to the LTR values for their respective devices, therefore export this function instead of marking it static. BUG=b:204343849 Change-Id: Id372600e8adec0d55d3483726bb9353139685774 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2021-11-29device/pci_device.c: Scan only one device for PCIeJianjun Wang
Only scan one device if it's a PCIe downstream port. A PCIe downstream port normally leads to a link with only device 0 on it. As an optimization, scan only for device 0 in that case. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Id184d03b33e1742b18efb3f11aa9b2f81fa03806 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15device/pci_rom: Add vga_oprom_preloadRaul E Rangel
This method will allow preloading the VGA_BIOS_FILE. By preloading the file, into cbfs_cache we reduce boot time. In the future we can also add support for loading the second VGA_BIOS_FILE and the DGPU VGA_BIOS_FILE. BUG=b:179699789 TEST=Boot guybrush to OS and verify 12 ms reduction in boot time Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Icb54fe3a942e9507ff6f1173ba5620a8f4ce6549 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-11device/azalia_device: Drop unused function parameterAngel Pons
The `dev` parameter of the `azalia_codecs_init()` function is not used. Remove it, and update all call sites accordingly. Change-Id: Idbe4a6ee5e81d5a7fd451fb83e0fe91bd0c09f0e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59119 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-11device/azalia_device: Adapt and export `codec_init()`Angel Pons
Make the `codec_init()` function non-static so that it can be used in other places. Rename it to `azalia_codec_init()` for consistency with the other functions of the API. Also, update the function's signature to make it more flexible. Remove the unused `dev` parameter and allow callers to pass the verb table to use. Update the original call site to preserve behavior. Change-Id: I5343796242065b5fedc78cd95bcf010c9e2623dd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59117 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-11azalia_device: Report if codec verb loading failedAngel Pons
Handle the return value of `azalia_program_verb_table()` and print different messages accordingly. Change-Id: I99e9e1416217c5e67c529944736affb31f9c7d2f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59115 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-11device/azalia_device: Export `codecs_init()`Angel Pons
Make the `codecs_init()` function non-static so that it can be used in other places. Rename it to `azalia_codecs_init()` to avoid name clashes with static definitions in southbridge code (which will be removed in subsequent commits). Change-Id: I080a73102b0c4f9f8a283cd93bba9b3b23169be0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-11arch/x86: Refactor the SMBIOS type 17 write functionSubrata Banik
List of changes: 1. Create Module Type macros as per Memory Type (i.e. DDR2/DDR3/DDR4/DDR5/LPDDR4/LPDDR5) and fix compilation issue due to renaming of existing macros due to scoping the Memory Type. 2. Use dedicated Memory Type and Module type for `Form Factor` and `TypeDetail` conversion using `get_spd_info()` function. 3. Create a new API (convert_form_factor_to_module_type()) for `Form Factor` to 'Module type' conversion as per `Memory Type`. 4. Add new argument as `Memory Type` to smbios_form_factor_to_spd_mod_type() so that it can internally call convert_form_factor_to_module_type() for `Module Type` conversion. 5. Update `test_smbios_form_factor_to_spd_mod_type()` to accommodate different memory types. 6. Skip fixed module type to form factor conversion using DDR2 SPD4 specification (inside dimm_info_fill()). Refer to datasheet SPD4.1.2.M-1 for LPDDRx and SPD4.1.2.L-3 for DDRx. BUG=b:194659789 TEST=Refer to dmidecode -t 17 output as below: Without this code change: Handle 0x0012, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 16 bits Data Width: 16 bits Size: 2048 MB Form Factor: Unknown .... With this code change: Handle 0x0012, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 16 bits Data Width: 16 bits Size: 2048 MB Form Factor: Row Of Chips .... Change-Id: Ia337ac8f50b61ae78d86a07c7a86aa9c248bad50 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-04treewide: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: I329efcb42a444b097794fde4f40acf5ececaea8c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao
2021-10-05src/acpi to src/lib: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5b8ecdfe75d99028fee820a2034466a8ad1c5e63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58080 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-24device: Drop unused function `dev_find_matching_device_on_bus`Furquan Shaikh
With use of device pointers, `dev_find_matching_device_on_bus()` is now unused and hence this change drops the function. Change-Id: I30fcb2d9932d770ca614cceffb15646ce8256465 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20device/dram/spd.c: Add more manufacturer ID codesJingleHsuWiwynn
Add manufacturer ID codes for Hynix, Samsung and Micron. Tested=On OCP Crater Lake, dmidecode -t 17 shows expected info. Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com> Change-Id: I0b4bbc46d3bfd9e9534cdd59f90cbdc150f29542 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daocheng Bu <daocheng.bu@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20device/mmio: Make buffer_to_fifo32() take a const bufferJulius Werner
The input buffer to the buffer_to_fifo family of functions is only read, so it can be a const pointer. (Also, remove the MIPS check in libpayload for these functions... the MIPS architecture has been removed a while ago.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I021069680cf691590fdacc3d51f747f12ae3df31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-09-13device/dram: Add addtional LPDDR4 speed gradesRob Barnes
Add additonal LPDDR4 speed grades. This is needed because the limited set has casued confusion when the reported speed did not match expectations. There does not seem to be a definitive list of LPDDR4 speed grades, so this list is derieved from JEDEC 209-4C and a survey of commonly used LPDDR4 speed grades. BUG=b:194184950 TEST=Boot, dmidecode -t 17 reports correct speed BRANCH=None Change-Id: Ie7706fd4ad5a7df68c07b8ca43261429ba140c61 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
2021-08-26device/mipi: Move to drivers/mipiJulius Werner
Sounds like we prefer to have this under drivers/ instead of device/. Also move all MIPI-related headers out from device/ into their own directory. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib3e66954b8f0cf85b28d8d186b09d7846707559d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-08-20qualcomm/sc7180: Switch to common MIPI panel libraryJulius Werner
This patch changes the sc7180 boards to use the new common MIPI panel framework, which allows more flexible initialization command packing and sharing panel definitions between boards. (I'm taking the lane count control back out again for now, since it seems we only ever want 4 for now anyway, and if we ever have a need for a different lane count it's not clear whether that should be a property of the board or the panel or both. Better to leave that decision until we have a real use case.) Also, the code was not written to deal with DCS commands that were not a length divisible by 4 (it would read over the end of the command buffer). The corresponding kernel driver seems to pad the command with 0xff instead, let's do the same here. (Also increase the maximum allowed command length to 256 bytes, as per Qualcomm's recommendation.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I78f6efbaa9da88a3574d5c6a51061e308412340e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56966 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-19device_util.c: Replace `memcpy()` with `strcpy()`Angel Pons
Use `strcpy()` instead of `memcpy()` to copy string literals. Change-Id: I8ebf591e3348d992739ed7cc2e4015aa650f115a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-18device: Move MIPI panel library from mainboard/google/kukui into commonJulius Werner
All boards that are trying to use MIPI panels eventually run into the problem that they need to store physical parameters and a list of DCS initialization commands for each panel, and these commands can be very different (e.g. a large amount of very short commands, a few very large commands, etc.). Finding a data format to fit all these different cases efficiently into the same structures keeps being a challenge, and the Kukui mainboard already once put a lot of effort into designing a clean, flexible and efficient solution for this. This patch moves that framework into a common src/device/mipi/ library where it can be used by other boards as well. (Also, this will hopefully allow us to save some duplicated work when using the same panel on different boards at some point.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I877f2b0c7ab984412b288e2ed27f37cd93c70863 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-07-20device/pci_rom: Make ON_DEVICE_ROM_LOAD condition truthyRaul E Rangel
Truthy conditions are easier to reason about. BUG=none TEST=Boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I229c3e90f5122d6191b28f9b4b6de79ac2fcb627 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-20device/pci_rom: Convert #if to C codeRaul E Rangel
No reason to use the preprocessor for this. BUG=none TEST=build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I920dfa2d27c2eb27e8bc50c615ccd13601610fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-20lib/cbfs,device/pci_rom: Move cbfs_boot_map_optionrom and modernizeRaul E Rangel
These methods are oprom specific. Move them out of CBFS. I also deleted the tohex methods and replaced them with snprintf. BUG=b:179699789 TEST=Boot guybrush and see oprom still loads Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I03791f19c93fabfe62d9ecd4f9b4fad0e6a6146e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-14src/device: Remove DEVICE_PATH_ESPI & DEVICE_PATH_LPCMartin Roth
The ESPI & LPC keywords were added for the zork program, but it was found that they weren't needed, so they were never used. The previous patch removes them from sconfig, so now they aren't needed in coreboot. BUG=None TEST=Build Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I9ae7817bb63d69ee272103b2d1186f125e188950 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56278 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-05device: Reflow strings in printk statementsAngel Pons
To ease finding some log messages, reflow their strings to use one line. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I5284429ca6d07debf2d6c4fdbffa286140fb7694 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-07-05device/resource_allocator_v4: Only highlight log message with ===Paul Menzel
Currently, four instead of three = are used in one log message. Done reading resources. ==== Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) === === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) === As the ending mark is `===` change it to `===` in the beginning. Done reading resources. === Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) === === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) === Change-Id: I40c3876e1f895b7f9771479234c9529cca2b97ba Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56045 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-01device: Clean up resource utility function signaturesKyösti Mälkki
Drop extern declarations from functions. Declare resource arguments as const. Change-Id: I7684cc7813bad805c39a762892636818279ac134 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55475 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-01device/pci_device.c: Reuse `irq` variableAngel Pons
The `irq` variable has the same value as `pIntAtoD[line - 1]`. Change-Id: Iabf760adbc3014b32cfe6f908dc04c38b71bd980 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-30device/pci_device.c: Drop redundant guardAngel Pons
This guard is nested inside an identical guard already. Change-Id: I2b315ee6620865429097041035ad493ddcc51884 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-28src/device/dram: Add terminating new lines to printk stringsNikolai Vyssotski
BUG=b:184124605 TEST=check serial log Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Change-Id: I521a2541e23d047e255b0cc8068ad63dfaf70bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/55851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-17device: Add helper function devfn_disable()Subrata Banik
devfn_disable() function is used to disable a device based on given bus, device function number. This function checks if the device is at enable state and disables the device. Change-Id: Ia4a8bfec7fc95c729a5bb156f88e9aab3bf5dd41 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-10device/pnp: Always provide `pnp_unset_and_set_config`Angel Pons
The `pnp_unset_and_set_config` function was only available when building with `ENV_PNP_SIMPLE_DEVICE` set. Add the complementary definition using device pointers, for the sake of completeness. Change-Id: I2a21e635f41f3f786057500fa96a2b3116e30d76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Máté Kukri <kukri.mate@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-06-09device/dram: Add LPDDR4 utilitiesRob Barnes
Add lpddr4.c utility file with lpddr4_speed_mhz_to_reported_mts. Fill in lpddr4_speeds using JDEC 209-4C table 210. LPDDR4 SPD decoding utilities are not included since there isn't a present need. BUG=b:184124605 TEST=Build and run on guybrush Change-Id: Id8ddfc98fff4255670c50e1ddd4d0a1326265772 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-09device: Add helper function is_devfn_enabled()Subrata Banik
is_devfn_enabled() function helps to check if a device is enabled based on given device function number. This function internally called is_dev_enabled() to check device state. Change-Id: I6aeba0da05b13b70155a991f69a6abf7eb48a78c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-24device: Consider fw_config probing in `is_dev_enabled()`Furquan Shaikh
With the introduction of fw_config support in coreboot, it is possible for mainboards to control the state of a device (on/off) in ramstage using fw_config probe conditions. However, the device tree in immutable in all other stages and hence `is_dev_enabled()` does not really reflect the true state as in ramstage. This change adds a call to `fw_config_probe_dev()` in `is_dev_enabled()` when device tree is immutable (by checking DEVTREE_EARLY) to first check if device is disabled because of device probe conditions. If so, then it reports device as being disabled. Else, dev->enabled is used to report the device state. This allows early stages (bootblock, romstage) to use `is_dev_enabled()` to get the true state of the device by taking probe conditions into account and eliminates the need for each caller to perform their own separate probing. Change-Id: Ifede6775bda245cba199d3419aebd782dc690f2c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54752 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11device/device.c: Print bus numbers in decimalAngel Pons
For consistency with other log messages, print bus numbers in decimal. Change-Id: Ib08ae40fc67c5f8fafd760e8dbb729d6de34c2bb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-10device: Drop unused `uma_memory_{base,size}` globalsAngel Pons
These global variables are not used anywhere. Drop them. Change-Id: I3fe60b970153d913ae7b005257e2b53647d6f343 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53977 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03device: Switch pci_dev_is_wake_source to take pci_devfn_tTim Wawrzynczak
With the recent switch to SMM module loader v2, the size of the SMM for module google/volteer increased to above 64K in size, and thus failed to install the permanent SMM handler. Turns out, the devicetree is all pulled into the SMM build because of elog, which calls `pci_dev_is_wake_source`, and is the only user of `struct device` in SMM. Changing this function to take a pci_devfn_t instead allows the linker to remove almost the entire devicetree from SMM (only usage left is when disabling HECI via SMM). BUG=b:186661594 TEST=Verify loaded program size of `smm.elf` for google/volteer is almost ~50% smaller. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4c39e5188321c8711d6479b15065e5aaedad8f38 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-19device/azalia_device.c: Add option to lock down GCAPAngel Pons
On Intel 6-series PCHs, the GCAP register is R/WO (Read / Write Once), and needs to be written to after the HD Audio controller is taken out of reset. Add a Kconfig option to read and write back GCAP in order to lock it down. Follow-up commits will select this option when switching platforms to use common Azalia code, to preserve original behaviour. Change-Id: I70bab20816fb6c0bf7bff35c3d2f5828cd96172d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-04-18device/Kconfig: Adapt PCIEXP_HOTPLUG_BUSESNico Huber
The default of 32 buses per hotplug bridge is rather high. Especially for platforms that limit MMConf space to 64 buses: they run out of numbers if there is more than a single hotplug bridge. Lower the default to * 8 if MMConf is limited to 64 or less buses, * 16 if MMConf is limited to 128 or less buses. Change-Id: I06d522dd92ceea9f4798273b26f947a5333800c3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52069 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14Rename do_printk() to printk()Nico Huber
The indirection seems unnecessary. The macros throw features like `-Wmisleading-indentation` off, though. Default build for QEMU/Q35 is unchanged. Change-Id: Ie4eab935a367b5ad6b38225c4973d41d9f70ef10 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-06device/i2c_bus.c: Correct code styleFrans Hendriks
device: Correct code style Revise the following aspects to follow coreboot's coding style: - Drop braces for single-statement condition. - Remove unnecessary newlines. BUG = N/A TEST = Build Compulab Intense-PC with secure oprom enabled Change-Id: I78ce97b0ce1587119a71893c867c2dd062552a31 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2021-04-05device/dram/ddr3: Drop unused MRS helpersAngel Pons
These aren't used anywhere anymore. Change-Id: I4cf2fc0d07a772886e90fba4f66591a7b0a40e6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-05device/dram/ddr4.h: Align with DDR3 and DDR2Angel Pons
Drop unnecessary typedefs and rename DDR4-specific definitions to avoid name clashes, as done for DDR3 in earlier commits. This allows including and using both DDR3 and DDR4 headers in the same compilation unit. Change-Id: I17f1cd88f83251ec23e9783a617f4d2ed41b07f0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51898 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05device/dram/ddr3: Rename DDR3 SPD memory typesAngel Pons
To avoid name clashes with definitions for other DRAM generations, rename the enum type and values to contain `ddr3` or `DDR3`. Change-Id: If3710149ba94b94ed14f03e32f5e1533b4bc25c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51896 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-05device/dram/ddr3: Get rid of useless typedefsAngel Pons
These typedefs are not necessary. Remove them, and rename some elements to avoid any confusion with other DRAM generations, such as DDR4. Change-Id: Ibe40f33372358262c540e371f7866b06a4ac842a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51895 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-24device/azalia_device.c: Program beep verbsPatrick Rudolph
Change-Id: I11b362d5e586194501de5dbd11f9c934a9d53940 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-24device/azalia_device.c: Introduce AZALIA_MAX_CODECSAngel Pons
Add the AZALIA_MAX_CODECS Kconfig option and use it. Change-Id: Ibb10c2f2992257bc261e6cb35f11cc4b2d956054 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-03-24device/azalia_device.c: Correct STATESTS access widthAngel Pons
The HD Audio spec states that the STATESTS register is 16 bits wide. Change-Id: If7859ed33e58d907a91c4ac8675892e37998cf41 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-24device/azalia_device.c: Unify `wait_for_valid` timeoutsAngel Pons
The timeout is never reached when the codec is functioning properly. Using a small timeout value can result in spurious errors with some codecs, e.g. a codec that is slow to respond but operates correctly. When a codec is non-operative, the timeout is only reached once per verb table, thus the impact on booting time is relatively small. So, use a reasonably long enough timeout to cover all possible cases. Remove the unconditional 25 µs delay and increase the timeout delay. The new value of 1 ms is the maximum of all existing implementations. Currently, the only boards using this code are AMD reference boards: - AMD Bilby - AMD Mandolin - AMD Padmelon Change-Id: Ia5e4829d404dcecdb9e7a377e896a319cb38531a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-22device/azalia_device.c: Switch to stopwatchPatrick Rudolph
Use timer.h helpers instead of open-coding timeout handling in polling loops. The 25-microsecond delay in `wait_for_valid` looks odd, and may be removed in subsequent commits. For now, preserve existing behavior. Change-Id: Id1227c6812618597c37408a7bf53bcbcae97374a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50789 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15pciexp_device: Rewrite LTR configurationNico Huber
I was bugged by spurious "Failed to enable LTR" messages for years. Looking at the the current algorithm, it is flawed in multiple ways: * It looks like the author didn't know they implemented a recursive algorithm (pciexp_enable_ltr()) inside another recursive algorithm (pciexp_scan_bridge()). Thus, at every tree level, everything is run again for the whole sub- tree. * LTR is enabled no matter if `.set_ltr_max_latencies` is implemented or not. Leaving the endpoints' LTR settings at 0: They are told to always report zero tolerance. In theory, depending on the root-complex implementation, this may result in higher power consumption than without LTR messages. * `.set_ltr_max_latencies` is only considered for the direct parent of a device. Thus, even with it implemented, an endpoint below a (non-root) bridge may suffer from the 0 settings as described above. * Due to the double-recursive nature, LTR is enabled starting with the endpoints, then moving up the tree, while the PCIe spec tells us to do it in the exact opposite order. With the current implementation of pciexp_scan_bridge(), it is hard to hook anything in that runs for each device from top to bottom. So the proposed solution still adds some redundancy: First, for every device that uses pciexp_scan_bus(), we enable LTR if possible (see below). Then, when returning from the bus- scanning recursion, we enable LTR for every device and configure the maximum latencies (if supported). The latter runs again on all bridges, because it's hard to know if pciexp_scan_bus() was used for them. When to enable LTR: * For all devices that implement `.set_ltr_max_latencies`. * For all devices below a bridge that has it enabled already. Change-Id: I2c5b8658f1fc8cec15e8b0824464c6fc9bee7e0e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51328 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-14device/pciexp_device.c: Remove CPP guardingArthur Heymans
Let the linker do its job. This fixes building with !CONFIG_PCIEXP_HOTPLUG on some platforms. Change-Id: I46560722dcb5f1d902709e40b714ef092515b164 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-13soc/amd/common/block/graphics/graphics: GOP: load VBIOSNikolai Vyssotski
Load VBIOS in pci set_resources to PCI_VGA_RAM_IMAGE_START (0xc0000) since pci_dev_init() will not load it in GOP case (VGA_ROM_RUN is not set). Add Cezanne GFX PID. BUG=b:171234996 BRANCH=Zork Change-Id: I4a6fea9b6cd60c862e15ed2ed539869c0f9bd363 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-12pci_def.h: Introduce PCI_EXP_DEVCAP2 & PCI_EXP_DEVCTL2 properNico Huber
Replace the existing, odd looking, unordered definitions used for LTR configuration with the usual names used by upstream libpci. TEST=Built google/brya0 with BUILD_TIMELESS=1: no changes. Fixes: Code looked like UEFI copy-pasta. Header file was a mess. Change-Id: Icf666692e22730e1bdf4bcdada433b3219af568a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51327 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12device: Give `pci_ops.set_L1_ss_latency` a proper nameNico Huber
Rename `set_L1_ss_latency` to what it does: `set_ltr_max_latencies`. TEST=Built google/brya0 with BUILD_TIMELESS=1: no changes. Change-Id: I7008aa18bf80d6709dce1b2d3bfbb5ea407a0574 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51326 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-24device/device.c: Rename .disable to .vga_disableArthur Heymans
This makes it clear what this function pointer is used for. Change-Id: I2090e164edee513e05a9409d6c7d18c2cdeb8662 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51009 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16device/dram: Move SPD manufacturer names out of arch/x86Patrick Rudolph
Move SPD manufacturer ID decoding to device/dram. Will be used by the following patch outside of SMBIOS scope as well. Change-Id: Iec175cd6ab1d20761da955785e4bc0e87ae02dbb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-15device: Add unit to Kconfig option name: `PRE_GRAPHICS_DELAY_MS`Paul Menzel
It’s good practice to put the unit into the name. Change-Id: I1493f61d4e495c22f09abf1829bb2eab9b1fd2b6 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-15src/device: Remove unused <console/console.h>Elyes HAOUAS
Change-Id: I30ed9661d8e84be49d362baafbb2bc624952c287 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50522 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10device/azalia_device: Add mainboard hook to program codecsAngel Pons
On some mainboards, codec configuration depends on settings that are only known at runtime, which is impossible to specify using one verb table. Add an optional `mainboard_azalia_program_runtime_verbs` hook where mainboards can program runtime-dependent codec verbs. Change-Id: I7efeba5c26051aeb5061cce191ace08c304a6c70 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-10device/azalia_device: Add function to program a verb tableAngel Pons
On some boards, Azalia configuration depends on config settings that are not known at compile-time. Expose a function to program a verb table, to be used in subsequent commits. Change-Id: Ie9607f6e733df66f0ca26a4bb70e0864ce1d4512 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-10device/azalia_device.c: Correct print formatAngel Pons
The type of `verb_size` is unsigned, thus use `%u` to print its value. Change-Id: I2b353b940e881dc8b5f0b902509d97d89c997a70 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-06soc/intel/broadwell: Conditionally skip PRE_GRAPHICS_DELAYKyösti Mälkki
It was commented that the need for the delay was mainly related to external displays and only with VBIOS execution. Move the delay such that it is done only when we actually need to execute the VBIOS aka option rom. A delay is currently only defined for librem/purism_bdw in its Kconfig. As the description of the issue sounds like it would equally happen on other platforms when VBIOS is involved, promote the Kconfig visible option to global scope. Change-Id: I4503158576f35057373f003586bbf76af4d59b3d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-05device/device.c: Print done at end of assign_resources()Frans Hendriks
First and last printk() log the same string. Add done at end of function. BUG = N/A TEST = Build and boot faceboot FBG1701 Change-Id: I66a64c7473a65206c3a4c4396c8c8ecba1eb1a57 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-05device: correct code styleFrans Hendriks
Revise the following aspects to follow coreboot's coding style: - Drop braces for single-statement condition and loop bodies. - Use `__func__` to print the current function's name. - Reflow pointer dereferences to fit in a single line. - Adjust the `*` position in pointer variable declarations. - Drop unnecessary `else` statements. BUG = N/A TEST = Build Compulab Intense-PC with secure oprom enabled Change-Id: I780251d946d5bea97658476d61d25555ec768dfc Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01device/oprom/include/x86emu/fpu_regs.h: Fix lint errorFrans Hendriks
`make lint` reports errors and warnings Solve the next errors: - SPACE_BEFORE_TAB - SPACING BUG = N/A TEST = Build Compulab Intense-PC with secure oprom enabled Change-Id: Ic7062e07a76bf95fe8e2e849f1d14342c9081a23 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49938 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-30device: Drop `mmconf_resource_init` functionAngel Pons
All uses of `mmconf_resource_init` have been replaced in previous patches with `mmconf_resource`, which uses Kconfig symbol values. Change-Id: I4473268016ed511aa5c4930a71977e722e34162a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-30device/Kconfig: Introduce MMCONF_LENGTHAngel Pons
This is necessary because ASL Memory32Fixed values cannot contain operations, even if they can be evaluated to constants. Add a sanity check in pci_mmio_cfg.h to ensure consistency with MMCONF_BUS_NUMBER. Change-Id: I8f0b5edf166580cc12c1363d8d6b6ef0f2854be9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50033 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-29device/Kconfig: Declare MMCONF symbols' type onceAngel Pons
Only specify the type of MMCONF_BASE_ADDRESS and MMCONF_BUS_NUMBER once. Change-Id: Iacd2ed0dae5f1fb6b309124da53b3fa0eef32693 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-27src/device: Don't die() on vBIOS errorsMartin Roth
Systems can boot to the OS without a display. Don't kill the boot process based on a vBIOS error, instead just display a warning. If the issue is actually fatal for some reason, it's going to die at some point anyway. BUG=b:175843172 TEST=Boot morphius to OS without a display BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I7d261321cdbe423dd754f6a354e5f50b53563fcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/49764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-26device/pci_device.c: Use __func__Elyes HAOUAS
Change-Id: Ia6c7de99164682dcbcc375969403d2bfb9675f3c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24device/pci_rom.c: Use __func__Elyes HAOUAS
Change-Id: I24c40d511eeaa5073acd2b47b20b4ec2f85bb69e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-18device/oprom/x86emu/sys.c: Use __func__Elyes HAOUAS
Change-Id: Ia278e1f2d1162fa9541bf0cead3b2734144190be Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-01-18device/xhci.c: Remove repeated wordElyes HAOUAS
Change-Id: Ia1648bd7ba4858268ca5f1a5c7b42b7de717d3d6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2021-01-18device/pci_device.c: Remove repeated wordElyes HAOUAS
Change-Id: Ia6936675684e3eaf2a57e2d28e465b1f0768249b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2021-01-12device/pci_device.c: Use same indents for switch/caseFelix Singer
Use same indents for switch/case to fix linter issues. Change-Id: I5c6abf5b918bac3df8d7617824392f2ec932cb32 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-10device: Add new Kconfig VGA_ROM_RUN_DEFAULT for mainboard userSubrata Banik
Platform can now select VGA_ROM_RUN_DEFAULT Kconfig to perform graphics initialization for PCI-E based discrete card through VGA OpRom (SoC or Mainboard user can't select VGA_ROM_RUN directly because it's part of choice option). (Note: Some payloads, like SeaBIOS, are also able to run Option ROMs, so coreboot does not need to enable VGA_ROM_RUN Kconfig) For payload like depthcharge, create VGA_ROM_RUN_DEFAULT Kconfig for mainboard to select design with DGPU where OpROM is embedded inside the DGPU card. Allow auto selection of VGA_ROM_RUN_DEFAULT from VGA_BIOS Kconfig. Also NO_GFX_INIT Kconfig to avoid running VGA_ROM_RUN by default in case SeaBIOS is used. TEST=Able to get Pre-OS splash screen with AMD Radeon RX 5700 PCI-E DGPU when mainboard user selects VGA_ROM_RUN_DEFAULT. Change-Id: Iecb2fcdb105af449bc20ad727759cdef17d5e376 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49016 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-28device/pnp: add register PNP_IO4Michael Niewöhner
Add the register PNP_IO4, which will be used by IT5570E in CB:48894. Change-Id: Ic820295247323f546d4c48ed17cfa4eab3dc5e92 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48924 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-28device + util/sconfig: introduce new device `gpio`Michael Niewöhner
Introduce a new device `gpio` that is going to be used for generic abstraction of gpio operations in the devicetree. The general idea behind this is that every chip can have gpios that shall be accessible in a very generic way by any driver through the devicetree. The chip that implements the chip-specific gpio operations has to assign them to the generic device operations struct, which then gets assigned to the gpio device during device probing. See CB:48583 for how this gets done for the SoCs using intelblocks/gpio. The gpio device then can be added to the devicetree with an alias name like in the following example: chip soc/whateverlake device gpio 0 alias soc_gpio on end ... end Any driver that requires access to this gpio device needs to have a device pointer (or multiple) and an option for specifying the gpio to be used in its chip config like this: struct drivers_ipmi_config { ... DEVTREE_CONST struct device *gpio_dev; u16 post_complete_gpio; ... }; The device `soc_gpio` can then be linked to the chip driver's `gpio_dev` above by using the syntax `use ... as ...`, which was introduced in commit 8e1ea52: chip drivers/ipmi use soc_gpio as gpio_dev register "bmc_jumper_gpio" = "GPP_D22" ... end The IPMI driver can then use the generic gpio operations without any knowlege of the chip's specifics: unsigned int gpio_val; const struct gpio_operations *gpio_ops; gpio_ops = dev_get_gpio_ops(conf->gpio_dev); gpio_val = gpio_ops->get(conf->bmc_jumper_gpio); For a full example have a look at CB:48096 and CB:48095. This change adds the new device type to sconfig and adds generic gpio operations to the `device_operations` struct. Also, a helper for getting the gpio operations from a device after checking them for NULL pointers gets added. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: Ic4572ad8b37bd1afd2fb213b2c67fb8aec536786 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-17azalia: Use `azalia_enter_reset` functionAngel Pons
Also tidy up some adjacent comments. Change-Id: I2e881900a52e42ab3f43ffe96cfbdcc63ff02e23 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-17azalia: Use `azalia_exit_reset` functionAngel Pons
Change-Id: I346040eb6531dac6c066a96cd73033aa17f026d0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-17device/azalia_device.c: Add codec reset helpersAngel Pons
Many uses of `azalia_set_bits` are used to toggle the reset bit. To avoid having to repeat the register operations and the corresponding comment, create two helpers with self-explanatory names. They will be put to use in subsequent commits, with one change for each function. Change-Id: If0594fdaf99319f08a2e272cd37958f0f216e654 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17device/azalia_device.c: Clarify commentAngel Pons
The `4` here doesn't have to do with the size of u32. Instead, it is because the verb header contains the number of jacks, which is the number of four-verb groups. Change-Id: I3956ce5ec2a7abc29982504cf75b262a1c098af5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Replace `hda_find_verb` usesAngel Pons
This function is equivalent to `azalia_find_verb` in its current form, so replace them. Also, adapt and move the function description comment. Change-Id: I40d1e634c31b00bd7808a651990d9bd6f0d054e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Make `azalia_find_verb` parametricAngel Pons
Allow to specify which table should the verb list be read from. Change-Id: Id1bc40c4364cda848f416bad9eeab1b8ca3e9512 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Drop unused parameter from `azalia_find_verb`Angel Pons
The `dev` parameter isn't used anywhere. Change-Id: I05643f8201137ffe89ded1e3f989c5a0f04e0af1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Make `find_verb` function non-staticAngel Pons
To allow dropping copies of this function, make it non-static. Also, rename it to `azalia_find_verb` as the function is now globally visible. Finally, replace the copies in chipset code with `azalia_find_verb`. Change-Id: Ie66323b2c62139e86d3d7e003f6653a3def7b5f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17device/azalia_device.c: Remove debug printsAngel Pons
The other five copies of this function in the tree do not have these debug prints. Remove them from here for consistency. Note that this information is already printed elsewhere, so nothing is being lost. Change-Id: I999032af1628bf8d66a057dc72368f02ef6eb8d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Make `set_bits` function non-staticAngel Pons
There's many copies of this function in the tree. Make the copy in azalia_device.c non-static and rename it to `azalia_set_bits`, then replace all other copies with it. Since azalia_device.c is only built when AZALIA_PLUGIN_SUPPORT is selected, select it where necessary. This has the side-effect of building hda_verb.c from the mainboard directory. If this patch happens to break audio on a mainboard, it's because its hda_verb.c was always wrong but wasn't being compiled. Change-Id: Iff3520131ec7bc8554612969e3a2fe9cdbc9305e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 17:42:46 +0000