| Age | Commit message (Collapse) | Author |
|---|
|
Add a function to test if pci_devfn_t matches with a device
instance of struct device, by comparing bus:dev.fn.
Change-Id: Ic6c3148ac62c7183246d83302ee504b17064c794
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3474
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This module uses cim_verb_data to detect and initialize HD audio
codecs.
The module source code is based on southbridge/intel/sch/audio.c and
southbridge/nvidia/mcp55/azalia.c.
Change-Id: I810fef6fdcf55d66f62da58c3d7d99f006559d6e
Signed-off-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-on: http://review.coreboot.org/3844
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
Taking device_t as a parameter, this allows to alter the PCI config
access handlers. This is useful to add tracing of PCI config writes
for devices having problems to initialise correctly.
On older AMD platform PCI MMIO may not be able to fully configure all
PCI devices/nodes, while MMIO_SUPPORT_DEFAULT would be preferred due
to its atomic nature. So those can be forced to IO config instead.
Change-Id: I2162884185bbfe461b036caf737980b45a51e522
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3608
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I53a40d114aa2da76398c5b97443d4096809dcf36
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/3730
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add three functions to edid.c:
void set_vbe_mode_info_valid(struct edid *edid, uintptr_t fb_addr)
takes an edid and uintptr_t, and fills in a static lb_framebuffer struct
as well as setting the static vbe_valid to 1 unless some problem
is found in the edid. The intent here is that this could be called from
the native graphics setup code on both ARM and x86.
int vbe_mode_info_valid(void)
returns value of the static vbe_valid.
void fill_lb_framebuffer(struct lb_framebuffer *framebuffer)
copies the static edid_fb to lb_framebuffer.
There is now a common vbe.h in src/include, removed the two special ones.
In general, graphics in coreboot is a mess, but graphics is always a
mess. We don't have a clean way to try two different ways to turn on
a device and use the one that works. One battle at a time. Overall,
things are much better.
The best part: this code would also work for ARM, which also uses EDID.
Change-Id: Id23eb61498b331d44ab064b8fb4cb10f07cff7f3
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3636
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Many super i/o chips only answer to PnP requests if they are in a
configuration state (sometimes also called ext func mode). To cope with
that, the code of many chips implements its own version of our default
PnP functions like pnp_set_resource(), pnp_enable_resource() etc.
To avoid this code duplication, this patch extends our PnP device
interface with optional functions to enter and exit configuration mode.
Change-Id: I9b7662a0db70ede93276764fa15020f251eb46bd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/3481
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current default implementation of pnp_enable() only disables devices
- if set so in the devicetree - but does not enable them. Enablement takes
place in pnp_enable_resources(). Yet, many PnP chips implement their own
version of pnp_enable() which also enables devices if set in the devicetree.
It's arguable, if enabling those devices makes sense, before they get
resources assigned. Maybe we can't write the resource registers if not,
who knows? The least we can do is providing a common implementation for
this behavior, and get rid of some code duplication.
Used the following cocci:
@@
expression e;
@@
+pnp_alt_enable(e);
-pnp_set_logical_device(e);
(
-pnp_set_enable(e, !!e->enabled);
|
-(e->enabled) ? pnp_set_enable(e, 1) : pnp_set_enable(e, 0);
|
-if (e->enabled) { pnp_set_enable(e, 1); }
-else { pnp_set_enable(e, 0); }
)
Change-Id: I8d695e8fcd3cf8b847b1aa99326b51a554700bc4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/3480
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch was made by listenning to what Ron Minnich told
me to do on #coreboot IRC channel on Freenode with my
adaptations on top.
i915tool is at https://code.google.com/p/i915tool/ ,
the one in coreboot is outdated.
Change-Id: I13cd684f4c290114836fbd7babd461153e8d6124
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: http://review.coreboot.org/3277
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
MRS commands are used to tell the DRAM chip what timing and what
termination and drive strength to use, along with other parameters.
The MRS commands are defined by the DDR3 specification [1]. This
makes MRS commands hardware-independent.
MRS command creation is duplicated in various shapes and forms in any
chipset that does DDR3. This is an effort to create a generic MRS API
that can be used with any chipset.
This is used in the VX900 branch.
[1] www.jedec.org/sites/default/files/docs/JESD79-3E.pdf
Change-Id: Ia8bb593e3e28a5923a866042327243d798c3b793
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/3354
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add convenience utilities for decoding DDR3 SPDs and printing the
information to the console. These have proven invaluable when writing the
VX900 memory initialization.
These are used in the VX900 branch
Information printed has the following format:
> SPD Data for DIMM 51
> Revision: 10
> Type : b
> Key : 2
> Banks : 8
> Capacity: 1 Gb
> Supported voltages: 1.5V
> SDRAM width : 8
> Bus extension : 0 bits
> Bus width : 64
> Optional features : DLL-Off_mode RZQ/7 RZQ/6
> Thermal features : ASR ext_temp_range
> Thermal sensor : no
> Standard SDRAM : no
> Row addr bits : 13
> Column addr bits : 10
> Number of ranks : 1
> DIMM Capacity : 1024 MB
> CAS latencies : 6 7 8 9
> tCKmin : 1.500 ns
> tAAmin : 13.125 ns
> tWRmin : 15.000 ns
> tRCDmin : 13.125 ns
> tRRDmin : 6.000 ns
> tRPmin : 13.125 ns
> tRASmin : 36.000 ns
> tRCmin : 49.125 ns
> tRFCmin : 110.000 ns
> tWTRmin : 7.500 ns
> tRTPmin : 7.500 ns
> tFAWmin : 30.000 ns
Change-Id: I30725a75caf74ac637db0a143344562bd9910466
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/3267
Tested-by: build bot (Jenkins)
|
|
In the process of streamlining coreboot code and getting
rid of unneeded ifdefs, drop a number of unneeded checks
for the GNU C compiler. This also cleans up x86emu/types.h
significantly by dropping all the duplicate types in there.
Change-Id: I0bf289e149ed02e5170751c101adc335b849a410
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/3226
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
With the introduction of a monotonic timer it is possible to
track the individual times of each device's init() call. Add this
ability behind a HAVE_MONOTONIC_TIMER option.
Example log messages:
Root Device init 5 usecs
CPU_CLUSTER: 0 init 66004 usecs
PCI: 00:00.0 init 1020 usecs
PCI: 00:02.0 init 456941 usecs
PCI: 00:13.0 init 3 usecs
PCI: 00:14.0 init 3 usecs
PCI: 00:15.0 init 92 usecs
PCI: 00:15.1 init 37 usecs
PCI: 00:15.2 init 36 usecs
PCI: 00:15.3 init 35 usecs
PCI: 00:15.4 init 35 usecs
PCI: 00:15.5 init 36 usecs
PCI: 00:15.6 init 35 usecs
PCI: 00:16.0 init 3666 usecs
PCI: 00:17.0 init 63 usecs
PCI: 00:1b.0 init 3 usecs
PCI: 00:1c.0 init 89 usecs
PCI: 00:1c.1 init 15 usecs
PCI: 00:1c.2 init 15 usecs
PCI: 00:1c.3 init 15 usecs
PCI: 00:1c.4 init 15 usecs
PCI: 00:1c.5 init 16 usecs
PCI: 00:1d.0 init 4 usecs
PCI: 00:1f.0 init 495 usecs
PCI: 00:1f.2 init 29 usecs
PCI: 00:1f.3 init 4 usecs
PCI: 00:1f.6 init 4 usecs
Change-Id: Ibe499848432c7ab20166ab10d6dfb07db03eab01
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/3162
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Adding a pxe rom manually is inconvenient.
With this patch, PXE ROM can be added automatically by selecting PXE_ROM in Kconfig.
I have tested this patch on AMD Parmer and Thatcher with iPXE.
iPXE would be a boot device in Seabios when pressing F12.
iPXE works well with coreboot and Seabios.
Change-Id: I2c4fc73fd9ae6c979f0af2290d410935f600e2c8
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/3013
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The pci device code was probing and loading the option rom before
it did the S3 resume check for VGA option roms. Instead move this
check before probing and loading so that we don't unnecessarily
do work.
Change-Id: If2e62d0c0e4b34b4f1bcd56ebcb9d3f54c6d0d24
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2979
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The current ramstage code contains uses of symbols that cause issues
when the ramstage is relocatable. There are 2 scenarios resolved by this
patch:
1. Absolute symbols that are actually sizes/limits. The symbols are
problematic when relocating a program because there is no way to
distinguish a symbol that shouldn't be relocated and one that can.
The only way to handle these symbols is to write a program to post
process the relocations and keep a whitelist of ones that shouldn't
be relocated. I don't believe that is a route that should be taken
so fix the users of these sizes/limits encoded as absolute symbols
to calculate the size at runtime or dereference a variable in memory
containing the size/limit.
2. Absoulte symbols that were relocated to a fixed address. These
absolute symbols are generated by assembly files to be placed at a
fixed location. Again, these symbols are problematic because one
can't distinguish a symbol that can't be relocated. The symbols
are again resolved at runtime to allow for proper relocation.
For the symbols defining a size either use 2 symbols and calculate the
difference or provide a variable in memory containing the size.
Change-Id: I1ef2bfe6fd531308218bcaac5dcccabf8edf932c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2789
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The Link native graphics commit 49428d84 [1]
Add support for Google's Chromebook Pixel
was missing some of the higher level bits, and hence could not be
used. This is not new code -- it has been working since last
August -- so the effort now is to get it into the tree and structure
it in a way compatible with upstream coreboot.
1. Add options to src/device/Kconfig to enable native graphics.
2. Export the MTRR function for setting variable MTRRs.
3. Clean up some of the comments and white space.
While I realize that the product name is Pixel, the mainboard in the
coreboot tree is called Link, and that name is what we will use
in our commits.
[1] http://review.coreboot.org/2482
Change-Id: Ie4db21f245cf5062fe3a8ee913d05dd79030e3e8
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2531
Tested-by: build bot (Jenkins)
|
|
In the file `COPYING` in the coreboot repository and upstream [1]
just one space is used.
The following command was used to convert all files.
$ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/'
[1] http://www.gnu.org/licenses/gpl-2.0.txt
Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/2490
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
|
|
The name lapic_cluster is a bit misleading, since the construct is not local
APIC specific by concept. As implementations and hardware change, be more
generic about our naming. This will allow us to support non-x86 systems without
adding new keywords.
Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2377
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The name pci_domain was a bit misleading, since the construct is only
PCI specific in a particular (northbridge/cpu) implementation, but not
by concept. As implementations and hardware change, be more generic
about our naming. This will allow us to support non-PCI systems without
adding new keywords.
Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2376
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This hit me when running the latest Qemu with coreboot:
First the graphics OPROM is running, then an iPXE OPROM.
The iPXE OPROM has no int10 support (obviously) so calling
vbe_set_graphics() wipes the framebuffer information from
the coreboot table.
Change-Id: Ie0453c4a908ea4a6216158f663407a3e72ce4d34
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2325
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Not sure why this didn't bite us earlier..
src/device/oprom/realmode/x86.c: In function 'fill_lb_framebuffer':
src/device/oprom/realmode/x86.c:272:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:274:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:275:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:276:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:278:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:280:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:281:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:283:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:284:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:286:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:287:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:289:13: error: dereferencing pointer to incomplete type
src/device/oprom/realmode/x86.c:290:13: error: dereferencing pointer to incomplete type
Change-Id: Ie3b0f731a7b995e954a26e745b07fc122088ca9f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2321
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The prototypes that were recently defined only work for the
internal implementations.
Change-Id: Ib34bb75a0b882533da550b9cd17cd777c2463e02
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/2318
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Summary:
Isolate CBFS underlying I/O to board/arch-specific implementations as
"media stream", to allow loading and booting romstage on non-x86.
CBFS functions now all take a new "media source" parameter; use
CBFS_DEFAULT_MEDIA if you simply want to load from main firmware.
API Changes:
cbfs_find => cbfs_get_file.
cbfs_find_file => cbfs_get_file_content.
cbfs_get_file => cbfs_get_file_content with correct type.
CBFS used to work only on memory-mapped ROM (all x86). For platforms like ARM,
the ROM may come from USB, UART, or SPI -- any serial devices and not available
for memory mapping.
To support these devices (and allowing CBFS to read from multiple source
at the same time), CBFS operations are now virtual-ized into "cbfs_media". To
simplify porting existing code, every media source must support both "reading
into pre-allocated memory (read)" and "read and return an allocated buffer
(map)". For devices without native memory-mapped ROM, "cbfs_simple_buffer*"
provides simple memory mapping simulation.
Every CBFS function now takes a cbfs_media* as parameter. CBFS_DEFAULT_MEDIA
is defined for CBFS functions to automatically initialize a per-board default
media (CBFS will internally calls init_default_cbfs_media). Also revised CBFS
function names relying on memory mapped backend (ex, "cbfs_find" => actually
loads files). Now we only have two getters:
struct cbfs_file *entry = cbfs_get_file(media, name);
void *data = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, name, type);
Test results:
- Verified to work on x86/qemu.
- Compiles on ARM, and follow up commit will provide working SPI driver.
Change-Id: Iac911ded25a6f2feffbf3101a81364625bb07746
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: http://review.coreboot.org/2182
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I42452a044dc75e35876fcea1736481e538eed663
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2100
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Mostly preventing inb/outb being used on non-x86
Change-Id: I0434df4ce477c262337672867dc6ce398ff95279
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2002
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
... on all other systems it will fail terribly ;-)
Change-Id: I7f8d10b71b2dbc798b28aee7c36872685c793fd8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2001
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Instead of adding regparm(0) to each assembler function called
by coreboot, add an asmlinkage macro (like the Linux kernel does)
that can be different per architecture (and that is empty on ARM
right now)
Change-Id: I7ad10c463f6c552f1201f77ae24ed354ac48e2d9
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1973
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
to match src/include/device
Change-Id: I5d0e5b4361c34881a3b81347aac48738cb5b9af0
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/1960
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
