summaryrefslogtreecommitdiff
path: root/src/device
AgeCommit message (Collapse)Author
2015-04-17rk3288: Add software I2C supportJulius Werner
This patch adds the necessary platform glue to allow the use of software-driven I2C bit banging on the RK3288. This is just a debugging feature that can be used to reproduce certain I2C failure cases. Also fix Makefile verstage linking for the feature and add some new rk3288 IOMUX macros as needed. BRANCH=None BUG=None TEST=Added "CONFIG_SOFTWARE_I2C=y" to configs/config.veyron_jerry, wrapped Jerry's bootblock and verstage in software_i2c_attach/detach() calls, confirmed that both PMIC and TPM could be driven correctly with software I2C driver. Tried out different combinations of software_i2c_wedge_ack() and software_i2c_wedge_read() on the PMIC and observed transfer results with the hardware controller after reboot... the worst that would happen is that the first register read-modify-write (DCDC_ILMAX) would fail to read, but all later transfers would be fine. Since that register is written twice (due to current BUCK1 ramp implementation) and is not terribily important anyway, I think we don't need to worry about wedging problems. Change-Id: Iba801ee61d30fb1fd3aef8300612c67fa50c441b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24dfca9bab38a20c40ef0c2dd4c775b8d8f47487 Original-Change-Id: I96777300a57c85471bad20e23a455551e9970222 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247890 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-01cbfs: correct types used for accessing filesAaron Durbin
In commit 72a8e5e751a7fa97c9d198f68cad49f9d9851669 the Makefile's were updated to use named types for cbfs file addition. However, the call sites were not checked to ensure the types matched. Correct all call sites to use the named types. Change-Id: Ib9fa693ef517e3196a3f04e9c06db52a9116fee7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9195 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-23PCIe: Revise L1 Sub-State supportKenji Chen
BRANCH=None BUG=None TEST=Confirmed build pass only Signed-off-by: Kenji Chen <kenji.chen@intel.com> Change-Id: Ic0e845436614e63ad5ace7fb74400f7ea295571c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d3670b92e40d8757a48add6116a0edcec18074d8 Original-Change-Id: I5e029b0f82a771149d4c6127e30b9062e8eaba89 Original-Reviewed-on: https://chromium-review.googlesource.com/244514 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com> Original-Tested-by: Kenji Chen <kenji.chen@intel.com> Reviewed-on: http://review.coreboot.org/8833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23PCIe: Add L1 Sub-State support.Kenji Chen
Enable L1 Sub-State when both root port and endpoint support it. [pg: keyed the feature to MMCONF_SUPPORT, otherwise boards without that capability fail to build.] Change-Id: Id11fc7c73eb865411747eef63f5f901e00a17f84 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ac04ad7e2261846e40da297f7fa317ccebda092 Original-BUG=chrome-os-partner:31424 Original-TEST=Build a image and run on Samus proto boards to check if the settings are applied correctly. I just only have proto boards and need someone having EVT boards to confirm the settings. Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Original-Change-Id: Id1b5a52ff0b896f4531c4a6e68e70a2cea8c736a Original-Reviewed-on: https://chromium-review.googlesource.com/221436 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/8832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-21device: convert to stopwatch APIAaron Durbin
Instead of open coding the monotonic timers use the stopwatch abstraction. BUG=None BRANCH=None TEST=Booted and noted timings work as expected. Built with software_i2c and no compilation failures. Change-Id: Ie5ecdd5bc764c1ab8ba4a923e65a1666aacd22f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c7bffb5aeb41e9b88cd2c99edd6abc38f1dc90af Original-Change-Id: I0170fe4b93d9976957a2dcb00a6ea41ddc0320ce Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/219495 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/8817 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-09AMD fam10: Drop PCI_BUS_SEGN_BITSKyösti Mälkki
All boards in tree use 0. Looks like this is all work that was never completed and tested. We also have static setting sysconf.segbit=0 which would conflict with PCI_BUS_SEGN_BITS>0. Having PCI_BUS_SEGN_BITS>0 would also require PCI MMCONF support to cover over 255 buses. Change-Id: I060efc44d1560541473b01690c2e8192863c1eb5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8554 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-03-09device/pciexp: Add support for PCIe CLK power managementKane Chen
Set PCIe "Enable Clock Power Management", if endpoint supports it. BUG=chrome-os-partner:31424 BRANCH=none TEST=build and boot on rambi, check Enable Clock Power Management in link control register is set properly Change-Id: Ie54110d1ef42184cfcf47c9fe4d735960aebe47f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://chromium-review.googlesource.com/220742 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> [Edit commit message.] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8447 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-01devicetree: Drop dummy root_dev opsKyösti Mälkki
This is just dead code. Should we decide that we want some of these calls made, they would be implemented in the mainboard context. Change-Id: I1f097c8da722f3afab9aa1c80b96590c7ca457d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8532 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-15device/device_util.c: Add space after ellipse for better legibilityPaul Menzel
Currently the coreboot console log contains messages in the following form. Show all devs...Before device enumeration. […] Show all devs...After init. Add a space after the ellipse, so it’s better readable and it does not look like a newline is missing. Show all devs... Before device enumeration. […] Show all devs... After init. Change-Id: Ifa2a37b8d60c433c219df7533a79fced03b6271a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8424 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-02-10PCI subsystem: Remove AGP bridge typeKyösti Mälkki
There is no auto-detection for AGP type and we have no hardware that selects this. Furthermore, we treat AGP bridges just like PCI bridges, there is no optimisation for higher bandwidth. Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8367 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05drivers/xgi/z9s: Port Linux framebuffer initialization to corebootTimothy Pearson
Add native XGI Z9s framebuffer support to coreboot XGI initialization code largely taken from Linux 3.18.5 TEST: Booted KFSN4-DRE with XGI Volari Z9s into SeaBIOS with SeaVGABIOS enabled. Text appeared correctly on screen and interaction with graphical comboot menu was successful. However, Linux cleared the framebuffer on boot, rendering the screen useless until Linux loaded its native xgifb driver. Change-Id: I606a3892849fc578b0c4d74536aec0a0adef3be3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8331 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-05AMD HyperTransport: Drop unused link optimisationKyösti Mälkki
Change-Id: Ia4398f6eb013c69838487bdd02d094f97d7224b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8342 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-01-30devicetree: Search PnP device node from the tree by pathKyösti Mälkki
Copied from device_util.c with added ROMSTAGE_CONST. Change-Id: If872631ed96a79b9a0b15e09382d6f81098c8db3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8297 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-24device/hypertransport.c: Fix typo in commentTimothy Pearson
Change-Id: Ib63a8b6e7f4663926104426992f6dea9ee3510b0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8262 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-20device/oprom/realmode/x86: Fix memory corruptionZhuo-Hao Lee
The length of the memcpy is incorrect and this will cause the destination buffer to corrupt the following 2 bytes of data. BUG=none BRANCH=All TEST=build and boot on rambi, system boot up without error Change-Id: I96adf2555b01aa35bb38a2e0f221fc2b2e87a41b Signed-off-by: Zhuo-Hao Lee <zhuo-hao.lee@intel.com> Reviewed-on: https://chromium-review.googlesource.com/237510 Reviewed-by: Ryan Lin <ryan.lin@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> [Remove usage of macro `FIELD_SIZEOF(t, f)`.] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8227 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-12src/device: Doxygen fixesMartin Roth
- Add missing parameters - add missing @param commands Change-Id: I029b5dafde94bd250800b06c0e9bd2118f10ef48 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8173 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-06doxygen fixes: fix parameter names to match the functionsMartin Roth
The doxygen parameter names in the comments no longer matched the functions they were attached to. Doxygen complains about extra parameter comments and uncommented parameters in the functions. Change-Id: I21b8a951f8d8d04b07c3779000eeaf1e69fed463 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8101 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-31Fix Kconfig whitespaceKyösti Mälkki
Change-Id: Iad64d018edda3064a77bfbcd41cfea5275a2e737 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-30i2c: Add software_i2c driver for I2C debugging and emulationJulius Werner
This patch adds I2C emulation in software through raw toggling of the SDA/SCL lines. Platforms need to provide bindings to toggle their respective I2C busses for this to work (e.g. by pinmuxing them as GPIOs, currently only enabled for Tegra). This is mostly useful as a debugging feature, to drive unusual states on a bus and closely monitor the device output without the need of a bus analyzer. It provides a few functions to "wedge" an I2C bus by aborting a transaction at certain points, which can be used to test if a system can correctly recover from an ill-timed reboot. However, it can also dynamically replace the existing I2C transfer functions and drive some/all I2C transfers on the system, which might be useful if a driver for the actual I2C controller hardware is not (yet) available. Based on original code by Doug Anderson <dianders@chromium.org> and Hung-ying Tyan <tyanh@chromium.org> for the ChromeOS embedded controller project. BRANCH=None BUG=chrome-os-partner:28323 TEST=Spread tegra_software_i2c_init()/tegra_software_i2c_disable() through the code and see that everything still works. Original-Change-Id: I9ee7ccbd1efb38206669a35d0c3318af16f8be63 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198791 Original-Reviewed-by: Doug Anderson <dianders@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8f71503dbbd74c5298e90e2163b67d4efe3e89db) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6c5f75bb5baaabd62b6b1fc26c2c71d9f1ce682 Reviewed-on: http://review.coreboot.org/7947 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-28RELOCATABLE_RAMSTAGE: Fix weak symbols with option ROMsKyösti Mälkki
After relocation the weak symbol map_oprom_vendev is no longer NULL. Always have empty stub function defined. Change-Id: I5b1bdeb3f37bb04363cf3d9dedaeafc9e193aaae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7956 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-19spd_cache debug: Log invalid CRC checksumTobias Diedrich
"SPD has a invalid or zero-valued CRC" is not a very useful message, so show the actual and expected values. Change-Id: I31a1cdacc82240c699627769d490b94f5d378e86 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7393 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-07ddr3: Plumber DIMM type to parsed structure.Vladimir Serbinenko
Useful for distinguishing registered modules. Change-Id: Ibf4a0f2cde6d50a1c5c1da0f50e3022a2bc7ccd7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7686 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-08device/dram/ddr3.c: Fix sizeof on array func param overflowEdward O'Callaghan
The sizeof on array function parameter will return size of 'u8 *' instead of 'spd_raw_data' (aka 'u8 [256]' leading to an overflow. Found-by: Clang Change-Id: I78e113a640b2953c853eb43bd6874e4694260b1f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7353 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-11-05pci_ops.{c,h}: Don't hide pointers behind typedefsEdward O'Callaghan
Change-Id: I7cf7c236f94314d7970b19063d73db788c8267e5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7227 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-10-17Kconfig: clean up options in top level and device menuStefan Reinauer
Move generic options to the "General Setup" menu. Move device specific options to the "Devices" menu. Change-Id: I514a021305d43f026b24fd3016477300700ed401 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7089 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-09-29Remove stale char[] initialization causing unaligned memory accessMarcelo Povoa
This throws an alignment fault when run in ARMv8 Foundation model and seems unnecessary, so remove it. Change-Id: I2e3aa54502c292958ba44ff4e2e71c27653f2e1a Signed-off-by: Marcelo Povoa <marcelogp@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/186744 Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 57510d553c56ca5dfb4765836ddb901744e29e20) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6974 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-09-17pnp: Allow setting of misc register 0xf4 in device treeStefan Reinauer
Change-Id: I602f970e0ee2fd634a74fd4c25358c2e78ca58f9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/179536 Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 02b0583e632f1ba53557f8cfe4293ad4ed29ff4d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6910 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-13azalia: Shrink boilerplateVladimir Serbinenko
Change-Id: Ib3e09644c0ee71aacb067adaa85653d151b52078 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6840 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-11pnp: Allow setting of misc register 0xfa in device treeStefan Reinauer
Change-Id: I45885905f0adaa8f0ad9137d7034e6f7a0dc43de Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/175356 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 7fe642543a8de249e13c3d63c3302a20910c247d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6859 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-09-08ARM: Generalize armv7 as arm.Gabe Black
There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2014-08-08device/oprom/realmode: Sanitize header inclusionEdward O'Callaghan
Alphabetise includes to avoid duplication. Change-Id: I7fa6998cd736bad2bab4a6b1a65d48a21d6220d9 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6415 Tested-by: build bot (Jenkins) Reviewed-by: Isaac Christensen <isaac.christensen@se-eng.com>
2014-07-30device/oprom/realmode/x86.c: Move includes to top of fileEdward O'Callaghan
Change-Id: Ib68e1f570092a69447d307c33b98f70b817f0ec1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6401 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-29sandy/ivybridge: Native raminit.Vladimir Serbinenko
Based on damo22's work and my X230 tracing. Works for my X230 in a variety of RAM configs. Also-By: Damien Zammit <damien@zamaudio.com> Change-Id: I1aa024c55a8416fc53b25e7123037df0e55a2769 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/5786 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28device/oprom/yabel/vbe.c: Fix memory leakDaniele Forsi
Do not allocate memory if the bootsplash was not found. Found by Cppcheck 1.65. Fixes: [src/device/oprom/yabel/vbe.c:734]: (error) Memory leak: decdata Change-Id: Ie2283165c9d7650dce9baf9e892dd055d44dcce5 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6377 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28device/oprom/realmode/x86.c: Fix memory leakDaniele Forsi
Do not allocate memory if the bootsplash was not found. Found by Cppcheck 1.65. Fixes: [src/device/oprom/realmode/x86.c:280]: (error) Memory leak: decdata Change-Id: I8f8160d3d349c0c2b2a3ed84461729e9210153d8 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6376 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-23src/device/Kconfig: make help for VGA_BIOS_ID and PXE_ROM_ID more similarDaniele Forsi
Add to VGA_BIOS_ID the hint about lspci -nn and add to PXE_ROM_ID an empty line at the end for better readability in menuconfig. Change-Id: I56751c047c1ff08142e2af58ef3ba5fe1169eba5 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6301 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-23src/.../Kconfig: various small fixes to textsDaniele Forsi
Fixed spelling and added empty lines to separate the help from the text automatically added during make menuconfig. Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6313 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-19src/device/Kconfig: fix typo in label "1024x768 256-color"Daniele Forsi
It had an extraneous digit after 768. Change-Id: Ie415e365f3eac0ed326786cea4c4628c002c4762 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6306 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-19device/pci_early.c: Mixes up variants of a typedefs to 'u32'Edward O'Callaghan
Unfortunately coreboot has to deal with ROMCC's short comings which has lead to a little bit of confusion due to typedefs. Essentially, coreboot defines four typedefs: * 'typedef struct device * device_t' in ramstage not in SIMPLE_DEVICE mode * 'typedef u32 device_t' in romstage or when SIMPLE_DEVICE is defined * 'typedef u32 pnp_devfn_t' * 'typedef u32 pci_devfn_t' Some early functions make use of 'device_t' over 'pci_devfn_t' and since the C type-checker does not enforce typedefs to the same type 'u32' these are never noticed. Fix these so that 'device_t' does not conflict in romstage for later work. We later plan to have 'pnp_devfn_t' and 'pci_devfn_t' as the only variants of 'u32' and 'device_t' to be a struct pointer type exclusively. Change-Id: I948801f5be968a934798f1bad7722649758cd4d3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6225 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-17device,Makefile.inc: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I73fe6f37c363f4bff332ca90178a236590067170 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6287 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-11YABEL: Initialize global `biosmem` pointer for VBENico Huber
The global pointer `biosmem` defined in vbe.c was never set. Thus, VBE calls didn't work within YABEL. Change-Id: I63c1c77755f9c442cfec227a495332595ce2b70c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6250 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-08device: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I50a5177a8bad5dada862f30c5c9421f08b0e1686 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6204 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-05YABEL: Drop IO stubs that are (by own admission) never usedPatrick Georgi
Change-Id: I90a120e64a5062493f64e3e8b48a75dae9342ec4 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/6178 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-05gizmosphere/gizmo: Move support of SPD data in CBFSKyösti Mälkki
This code is not specific to any board or AGESA family. Change-Id: I26c32fbe8e45018e239762b072dfe3da05271697 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5690 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-25device/pci_device.c: Sanitize headersEdward O'Callaghan
Change-Id: I6254f4ab767952cc8ff31bb462c7037b027442ba Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6079 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21Remove guarding #includes by CONFIG_FOO combinationsEdward O'Callaghan
First of many to remove guarding the inclusion of headers based on CONFIG_ options. This *potentially* could hide issues such as functions being swapped from under our feet, since different runtime behaviour could be declared with the function same name and type-signature. Hence, depending on the header we happen to get may change runtime behaviour. Change-Id: Ife56801c783c44e1882abef711e09b85b7f295a4 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6055 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21PCI VGA ROM: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: I6f9c992f1a68025ed18de57c5856b3bf9a673bfb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6075 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-11device/device_util.c: Fix wording in comment of `new_resource()`Paul Menzel
Change-Id: Ieb0d5de37870a359f3a7ea1543640e26f86c1684 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5952 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-29PCI IRQs: Swizzle PCI IRQs for PCI bridgesMike Loptien
The PCI Specification states that devices that implement a bridge and a secondary bus must swizzle (rotate) the interrupt pins according to the table below: Child Dev # Child PIN Parent PIN 0,4,8,12... A/B/C/D A/B/C/D 1,5,9,13... A/B/C/D B/C/D/A 2,6,10,14.. A/B/C/D C/D/A/B 3,7,11,15.. A/B/C/D D/A/B/C Which is also described by this equation: PIN_parent = (Pin_child + Dev_child) % 4 When a device is found and its bus number is greater than 0, it is on a bridge and needs to be swizzled. Following the string of parents up to the root bus and swizzling as we go gives us the desired swizzling result. When BIOS_SPEW is defined, it will print out each step of the swizzling process. Change-Id: Icafeadd01983282c86e25f560c831c9482c74e68 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/5734 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
2014-05-21device_romstage: Add a way to move to the next deviceMartin Roth
When trying to loop through all the devices in romstage, there was no function to just go from one to the next. This allows an easy way to go all the way down the chain of devices. Change-Id: Id205b24610d75de060b0d48fa283a2ab92d1df0a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/5732 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-18device/oprom/yabel/vbe.c: Avoid unused func warnEdward O'Callaghan
Change-Id: Idd74893c1fc3d0818d00c1f727c9fdc27168af0c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5782 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-01device: Conditionally bypass oprom executionKyösti Mälkki
Builds with CHROMEOS can bypass VGA oprom when boot is not in developer or recovery modes. Have the same functionality available without CHROMEOS but with BOOTMODE_STRAPS. Change-Id: I97644364305dc05aad78a744599476ccc58db163 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5595 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-01ChromeOS: Remove oprom_is_loadedKyösti Mälkki
A global flag oprom_is_loaded was used to indicate to U-boot that VGA option ROM was loaded and run, or that native VGA init was completed on GMA device. Implement this feature without dependency to CHROMEOS option and replace use of global variable oprom_is_loaded with call to gfx_get_init_done(). Change-Id: I7e1afd752f18e5346dabdee62e4f7ea08ada5faf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4309 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01device: provide option to always load PCI option romsKyösti Mälkki
Certain kernel drivers require the presence of option rom contents because the board's static configuration information is located within the blob. Therefore, allow a chipset/board to instruct the pci device handling code to always load but not necessarily run the option rom. BUG=chrome-os-partner:25885 BRANCH=baytrail TEST=Both enabling and not enabling this option shows expected behavior. Change-Id: Ib0f65ffaf1a861b543573a062c291f4ba491ffe0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/188720 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5594 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-04-09OxPCIe uart: Split PCI bridge controlKyösti Mälkki
None of the PCI bridge management here is specific to the PCI UART device/function. Also the Kconfig variable defaults are not globally valid, fill samsung/lumpy with working values. Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5237 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03devices: Allow to configure textmode in native gfx init.Vladimir Serbinenko
Usefull to select between text mode which offers best compatibility with payloads and gfx mode which makes the best-looking screen. Also right now we have an unfortunate situation when qemu is in gfx mode while most real systems use text mode. Change-Id: Ifad7ba197875edfdd06eb932afeb5800229ef055 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5282 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-22device: Do not show "framebuffer graphics resolution" with native init.Vladimir Serbinenko
No native init uses this. Real hardware ones use mode specified in EDID. Qemu one uses CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_[XY]RES. Change-Id: I0845fec10b9811e2be44b5be30b9dc4f1c9719a6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5281 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-12PCI: Add capability list parser to romstageKyösti Mälkki
These are almost one-to-one copies from pci_device.c. However, devicetree has not been enumerated yet and we have no console. Change-Id: Ic80c781626521d03adde05bdb1916acce31290ea Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5196 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-12PCI: Guard pci.h with CONFIG_PCIKyösti Mälkki
Adding PCI functions for romstage in pci.h breaks ARMv7 build without this. Also fix two related includes to use pci_def.h instead. Change-Id: I5291eaf6ddf5a584f50af29cf791d2ca4d9caa71 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5199 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-09device_util: Make device in dev_find_slot_pnp u16.Vladimir Serbinenko
LDN is 8-bit but coreboot squeezes unrelated info: VLDN in this field. Increase to 16-bit to handle this. Change-Id: I97af1b32dcfaed84980fa3aa4c317dfab6fad6d8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5165 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-07device_util: Add dev_find_slot_pnp.Vladimir Serbinenko
Change-Id: I5223c54c8ddbc60a176e4d718730e99decc772a3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5112 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-01smbus: Add guards to avoid calling NULL.Vladimir Serbinenko
Many of SMBus functions are unavailable on many controllers. While calling unavailable function is bad, it shouldn't lead to spectacular crash. Change-Id: I7912f3bbbb438603893223a586dcedf57e8a7e28 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4837 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-01-12lib/cbfs_core.c: Supply size of file as well in cbfs_get_file_contentVladimir Serbinenko
Change-Id: I5b93e5321e470f19ad22ca2cfdb1ebf3b340b252 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4659 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-01-10Replace all occurences of sprintf with snprintfVladimir Serbinenko
THis reduces risks of bufer overflows. Change-Id: I77f80e76efec16ac0a0af83d76430a8126a7602d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4279 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-04device/Kconfig: Add third person singular s to lacksPaul Menzel
Change-Id: I74be0dbbf8d99f58ac28bfac281ccd27d1500078 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4608 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-24Remove PCI_ROM_RUN optionVladimir Serbinenko
The main purpose of option rom is to supply int* handlers. But supplying those is outside of coreboot scope and if someone needs those they should run SeaBIOS anyway which runs the option roms wonderfully. Running VGA oprom is kept because they're needed to init graphics. This patch still keeps the options to include the option roms to make them available to SeaBIOS. Change-Id: I646334cf88094d3bf8f527779a68a07e0b4b93ec Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4545 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
2013-12-21Add Kconfig options to override Subsystem Vendor and Device IDDuncan Laurie
These can typically be set in the devicetree but we need a way to override those values with a Kconfig setting so as not to expose the Vendor ID before the product has launched. Change-Id: Ib382e6d9359d24b128c693a657ffde52604efad3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65310 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4455 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-17device/dram/ddr3: Move CRC calculation in a separate functionAlexandru Gagniuc
Calculating the CRC of a SPD may be useful by itself, so split that part of the code in a separate function. Change-Id: I6c20d3db380551865126fd890e89de6b06359207 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4537 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12Log device path during resource allocationDuncan Laurie
Systems are hanging in dev_configure() without a log to indicate which device is being processed. Add some logging points to save the device path before talking to the device so we can narrow in on which device is the problem. Change-Id: I3751c19a1ea68cdccbc33e4f6b2eeddd1bd9f2e4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61296 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4349 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-11-26Clean up POST codes for Boot State machineDuncan Laurie
Now that there is a clearly defined boot state machine we can add some useful post codes to indicate the current point in the state machine by having it log a post code before the execution of each state. This removes the currently defined POST codes that were used by hardwaremain in favor of a new contiguous range that are defined for each boot state. The reason for this is that the existing codes are mostly used to indicate when something is done, which is confusing for actual debug because POST code debugging relies on knowing what is about to happen (to know what may be at fault) rather than what has just finished. One additonal change is added during device init step as this step often does the bulk of the work, and frequently logs POST codes itself. Therefore in order to keep better track of what device is being initialized POST_BS_DEV_INIT is logged before each device is initialized. interrupted boot with reset button and gathered the eventlog. Mosys has been extended to decode the well-known POST codes: 26 | 2013-06-10 10:32:48 | System boot | 120 27 | 2013-06-10 10:32:48 | Last post code in previous boot | 0x75 | Device Initialize 28 | 2013-06-10 10:32:48 | Extra info from previous boot | PCI | 00:16.0 29 | 2013-06-10 10:32:48 | Reset Button 30 | 2013-06-10 10:32:48 | System Reset Change-Id: Ida1e1129d274d28cbe8e49e4a01483e335a03d96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58106 Reviewed-on: http://review.coreboot.org/4231 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26Log device path into CMOS during probe stagesDuncan Laurie
One of the most common hangs during coreboot execution is during ramstage device init steps. Currently there are a set of (somewhat misleading) post codes during this phase which give some indication as to where execution stopped, but it provides no information on what device was actually being initialized at that point. This uses the new CMOS "extra" log banks to store the encoded device path of the device that is about to be touched by coreboot. This way if the system hangs when talking to the device there will be some indication where to investigate next. interrupted boot with reset button and gathered the eventlog after several test runs: 26 | 2013-06-10 10:32:48 | System boot | 120 27 | 2013-06-10 10:32:48 | Last post code in previous boot | 0x75 | Device Initialize 28 | 2013-06-10 10:32:48 | Extra info from previous boot | PCI | 00:16.0 29 | 2013-06-10 10:32:48 | Reset Button 30 | 2013-06-10 10:32:48 | System Reset Change-Id: I6045bd4c384358b8a4e464eb03ccad639283939c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58105 Reviewed-on: http://review.coreboot.org/4230 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26Add function to encode device path into integerDuncan Laurie
This function will encode the device path into 3 bytes of a dword which can be saved for debug. It will be used by subsequent commit to store the current device into CMOS for debugging BIOS hangs. Change-Id: I3a5155ea53c8d280806e610a0f8998dbabe15f3c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58103 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4228 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25x86: use proper types for interrupt callbacksAaron Durbin
The mainboard_interrupt_handlers() argument for the function pointer was using void * as the type. This does not allow the compiler to catch type differences for the arguments. Thus, some code has been committed which violates the new interrupt callbacks not taking any arguments. Make sure the compiler provides a type checking benefit. Change-Id: Ie20699a368e70c33a9a9912e0fcd63f1e6bb4f18 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48970 Reviewed-on: http://review.coreboot.org/4141 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-08Add new finalize functions for devices and chipsMarc Jones
Many chipset devices require additional configuration after device init. It is not uncommmon for a device early in the devicetree list to need to change a setting after a device later in the tree does PCI init. A final function call has been added to device ops to handle this case. It is called prior to coreboot table setup. Another problem that is often seen is that the chipset or mainboard need to do some final cleanup just before loading the OS. The chip finalize has been added for this case. It is call after all coreboot tables are setup and the payload is ready to be called. Similar functionality could be implemented with the hardwaremain states, but those don't fit well in the device tree function pointer structure and should be used sparingly. Change-Id: Ib37cce104ae41ec225a8502942d85e54d99ea75f Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4012 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-08-24Add test to match struct device with pci_devfn_tKyösti Mälkki
Add a function to test if pci_devfn_t matches with a device instance of struct device, by comparing bus:dev.fn. Change-Id: Ic6c3148ac62c7183246d83302ee504b17064c794 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3474 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-13Add a generic Intel HD audio (Azalia) module azalia_device.cAndrew Wu
This module uses cim_verb_data to detect and initialize HD audio codecs. The module source code is based on southbridge/intel/sch/audio.c and southbridge/nvidia/mcp55/azalia.c. Change-Id: I810fef6fdcf55d66f62da58c3d7d99f006559d6e Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3844 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-07-25Redefine pci_bus_default_ops as functionKyösti Mälkki
Taking device_t as a parameter, this allows to alter the PCI config access handlers. This is useful to add tracing of PCI config writes for devices having problems to initialise correctly. On older AMD platform PCI MMIO may not be able to fully configure all PCI devices/nodes, while MMIO_SUPPORT_DEFAULT would be preferred due to its atomic nature. So those can be forced to IO config instead. Change-Id: I2162884185bbfe461b036caf737980b45a51e522 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3608 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-10device: Fix spellingMartin Roth
Change-Id: I53a40d114aa2da76398c5b97443d4096809dcf36 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3730 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Provide support for setting up the framebuffer from EDIDRonald G. Minnich
Add three functions to edid.c: void set_vbe_mode_info_valid(struct edid *edid, uintptr_t fb_addr) takes an edid and uintptr_t, and fills in a static lb_framebuffer struct as well as setting the static vbe_valid to 1 unless some problem is found in the edid. The intent here is that this could be called from the native graphics setup code on both ARM and x86. int vbe_mode_info_valid(void) returns value of the static vbe_valid. void fill_lb_framebuffer(struct lb_framebuffer *framebuffer) copies the static edid_fb to lb_framebuffer. There is now a common vbe.h in src/include, removed the two special ones. In general, graphics in coreboot is a mess, but graphics is always a mess. We don't have a clean way to try two different ways to turn on a device and use the one that works. One battle at a time. Overall, things are much better. The best part: this code would also work for ARM, which also uses EDID. Change-Id: Id23eb61498b331d44ab064b8fb4cb10f07cff7f3 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3636 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Implement common handling for PnP config modesNico Huber
Many super i/o chips only answer to PnP requests if they are in a configuration state (sometimes also called ext func mode). To cope with that, the code of many chips implements its own version of our default PnP functions like pnp_set_resource(), pnp_enable_resource() etc. To avoid this code duplication, this patch extends our PnP device interface with optional functions to enter and exit configuration mode. Change-Id: I9b7662a0db70ede93276764fa15020f251eb46bd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3481 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Provide alternative pnp_enable() implementationNico Huber
The current default implementation of pnp_enable() only disables devices - if set so in the devicetree - but does not enable them. Enablement takes place in pnp_enable_resources(). Yet, many PnP chips implement their own version of pnp_enable() which also enables devices if set in the devicetree. It's arguable, if enabling those devices makes sense, before they get resources assigned. Maybe we can't write the resource registers if not, who knows? The least we can do is providing a common implementation for this behavior, and get rid of some code duplication. Used the following cocci: @@ expression e; @@ +pnp_alt_enable(e); -pnp_set_logical_device(e); ( -pnp_set_enable(e, !!e->enabled); | -(e->enabled) ? pnp_set_enable(e, 1) : pnp_set_enable(e, 0); | -if (e->enabled) { pnp_set_enable(e, 1); } -else { pnp_set_enable(e, 0); } ) Change-Id: I8d695e8fcd3cf8b847b1aa99326b51a554700bc4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3480 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-04Yabel : Add tracing option needed by i915tool.Denis 'GNUtoo' Carikli
This patch was made by listenning to what Ron Minnich told me to do on #coreboot IRC channel on Freenode with my adaptations on top. i915tool is at https://code.google.com/p/i915tool/ , the one in coreboot is outdated. Change-Id: I13cd684f4c290114836fbd7babd461153e8d6124 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3277 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04DDR3: Add utilities for creating MRS commandsAlexandru Gagniuc
MRS commands are used to tell the DRAM chip what timing and what termination and drive strength to use, along with other parameters. The MRS commands are defined by the DDR3 specification [1]. This makes MRS commands hardware-independent. MRS command creation is duplicated in various shapes and forms in any chipset that does DDR3. This is an effort to create a generic MRS API that can be used with any chipset. This is used in the VX900 branch. [1] www.jedec.org/sites/default/files/docs/JESD79-3E.pdf Change-Id: Ia8bb593e3e28a5923a866042327243d798c3b793 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3354 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-03dram: Add utilities for decoding DDR3 SPDsAlexandru Gagniuc
Add convenience utilities for decoding DDR3 SPDs and printing the information to the console. These have proven invaluable when writing the VX900 memory initialization. These are used in the VX900 branch Information printed has the following format: > SPD Data for DIMM 51 > Revision: 10 > Type : b > Key : 2 > Banks : 8 > Capacity: 1 Gb > Supported voltages: 1.5V > SDRAM width : 8 > Bus extension : 0 bits > Bus width : 64 > Optional features : DLL-Off_mode RZQ/7 RZQ/6 > Thermal features : ASR ext_temp_range > Thermal sensor : no > Standard SDRAM : no > Row addr bits : 13 > Column addr bits : 10 > Number of ranks : 1 > DIMM Capacity : 1024 MB > CAS latencies : 6 7 8 9 > tCKmin : 1.500 ns > tAAmin : 13.125 ns > tWRmin : 15.000 ns > tRCDmin : 13.125 ns > tRRDmin : 6.000 ns > tRPmin : 13.125 ns > tRASmin : 36.000 ns > tRCmin : 49.125 ns > tRFCmin : 110.000 ns > tWTRmin : 7.500 ns > tRTPmin : 7.500 ns > tFAWmin : 30.000 ns Change-Id: I30725a75caf74ac637db0a143344562bd9910466 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3267 Tested-by: build bot (Jenkins)
2013-05-10Get rid of a number of __GNUC__ checksStefan Reinauer
In the process of streamlining coreboot code and getting rid of unneeded ifdefs, drop a number of unneeded checks for the GNU C compiler. This also cleans up x86emu/types.h significantly by dropping all the duplicate types in there. Change-Id: I0bf289e149ed02e5170751c101adc335b849a410 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3226 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-01device tree: track init timesAaron Durbin
With the introduction of a monotonic timer it is possible to track the individual times of each device's init() call. Add this ability behind a HAVE_MONOTONIC_TIMER option. Example log messages: Root Device init 5 usecs CPU_CLUSTER: 0 init 66004 usecs PCI: 00:00.0 init 1020 usecs PCI: 00:02.0 init 456941 usecs PCI: 00:13.0 init 3 usecs PCI: 00:14.0 init 3 usecs PCI: 00:15.0 init 92 usecs PCI: 00:15.1 init 37 usecs PCI: 00:15.2 init 36 usecs PCI: 00:15.3 init 35 usecs PCI: 00:15.4 init 35 usecs PCI: 00:15.5 init 36 usecs PCI: 00:15.6 init 35 usecs PCI: 00:16.0 init 3666 usecs PCI: 00:17.0 init 63 usecs PCI: 00:1b.0 init 3 usecs PCI: 00:1c.0 init 89 usecs PCI: 00:1c.1 init 15 usecs PCI: 00:1c.2 init 15 usecs PCI: 00:1c.3 init 15 usecs PCI: 00:1c.4 init 15 usecs PCI: 00:1c.5 init 16 usecs PCI: 00:1d.0 init 4 usecs PCI: 00:1f.0 init 495 usecs PCI: 00:1f.2 init 29 usecs PCI: 00:1f.3 init 4 usecs PCI: 00:1f.6 init 4 usecs Change-Id: Ibe499848432c7ab20166ab10d6dfb07db03eab01 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3162 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-03Add PXE ROM selection to Kconfig menuSiyuan Wang
Adding a pxe rom manually is inconvenient. With this patch, PXE ROM can be added automatically by selecting PXE_ROM in Kconfig. I have tested this patch on AMD Parmer and Thatcher with iPXE. iPXE would be a boot device in Seabios when pressing F12. iPXE works well with coreboot and Seabios. Change-Id: I2c4fc73fd9ae6c979f0af2290d410935f600e2c8 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01pci: don't load vga option rom before S3 checkAaron Durbin
The pci device code was probing and loading the option rom before it did the S3 resume check for VGA option roms. Instead move this check before probing and loading so that we don't unnecessarily do work. Change-Id: If2e62d0c0e4b34b4f1bcd56ebcb9d3f54c6d0d24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2979 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-21ramstage: prepare for relocationAaron Durbin
The current ramstage code contains uses of symbols that cause issues when the ramstage is relocatable. There are 2 scenarios resolved by this patch: 1. Absolute symbols that are actually sizes/limits. The symbols are problematic when relocating a program because there is no way to distinguish a symbol that shouldn't be relocated and one that can. The only way to handle these symbols is to write a program to post process the relocations and keep a whitelist of ones that shouldn't be relocated. I don't believe that is a route that should be taken so fix the users of these sizes/limits encoded as absolute symbols to calculate the size at runtime or dereference a variable in memory containing the size/limit. 2. Absoulte symbols that were relocated to a fixed address. These absolute symbols are generated by assembly files to be placed at a fixed location. Again, these symbols are problematic because one can't distinguish a symbol that can't be relocated. The symbols are again resolved at runtime to allow for proper relocation. For the symbols defining a size either use 2 symbols and calculate the difference or provide a variable in memory containing the size. Change-Id: I1ef2bfe6fd531308218bcaac5dcccabf8edf932c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2789 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-15Google Link: Add remaining code to support native graphicsRonald G. Minnich
The Link native graphics commit 49428d84 [1] Add support for Google's Chromebook Pixel was missing some of the higher level bits, and hence could not be used. This is not new code -- it has been working since last August -- so the effort now is to get it into the tree and structure it in a way compatible with upstream coreboot. 1. Add options to src/device/Kconfig to enable native graphics. 2. Export the MTRR function for setting variable MTRRs. 3. Clean up some of the comments and white space. While I realize that the product name is Pixel, the mainboard in the coreboot tree is called Link, and that name is what we will use in our commits. [1] http://review.coreboot.org/2482 Change-Id: Ie4db21f245cf5062fe3a8ee913d05dd79030e3e8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2531 Tested-by: build bot (Jenkins)
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-08VBE: Skip graphics mode setting for non-VGA devicesStefan Reinauer
This hit me when running the latest Qemu with coreboot: First the graphics OPROM is running, then an iPXE OPROM. The iPXE OPROM has no int10 support (obviously) so calling vbe_set_graphics() wipes the framebuffer information from the coreboot table. Change-Id: Ie0453c4a908ea4a6216158f663407a3e72ce4d34 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2325 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-08oprom: fix compilation for Qemu target (and possibly others)Stefan Reinauer
Not sure why this didn't bite us earlier.. src/device/oprom/realmode/x86.c: In function 'fill_lb_framebuffer': src/device/oprom/realmode/x86.c:272:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:274:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:275:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:276:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:278:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:280:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:281:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:283:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:284:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:286:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:287:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:289:13: error: dereferencing pointer to incomplete type src/device/oprom/realmode/x86.c:290:13: error: dereferencing pointer to incomplete type Change-Id: Ie3b0f731a7b995e954a26e745b07fc122088ca9f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2321 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-07YABEL: use system {in,out}[bwl] on x86Patrick Georgi
The prototypes that were recently defined only work for the internal implementations. Change-Id: Ib34bb75a0b882533da550b9cd17cd777c2463e02 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/2318 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Extend CBFS to support arbitrary ROM source media.Hung-Te Lin
Summary: Isolate CBFS underlying I/O to board/arch-specific implementations as "media stream", to allow loading and booting romstage on non-x86. CBFS functions now all take a new "media source" parameter; use CBFS_DEFAULT_MEDIA if you simply want to load from main firmware. API Changes: cbfs_find => cbfs_get_file. cbfs_find_file => cbfs_get_file_content. cbfs_get_file => cbfs_get_file_content with correct type. CBFS used to work only on memory-mapped ROM (all x86). For platforms like ARM, the ROM may come from USB, UART, or SPI -- any serial devices and not available for memory mapping. To support these devices (and allowing CBFS to read from multiple source at the same time), CBFS operations are now virtual-ized into "cbfs_media". To simplify porting existing code, every media source must support both "reading into pre-allocated memory (read)" and "read and return an allocated buffer (map)". For devices without native memory-mapped ROM, "cbfs_simple_buffer*" provides simple memory mapping simulation. Every CBFS function now takes a cbfs_media* as parameter. CBFS_DEFAULT_MEDIA is defined for CBFS functions to automatically initialize a per-board default media (CBFS will internally calls init_default_cbfs_media). Also revised CBFS function names relying on memory mapped backend (ex, "cbfs_find" => actually loads files). Now we only have two getters: struct cbfs_file *entry = cbfs_get_file(media, name); void *data = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, name, type); Test results: - Verified to work on x86/qemu. - Compiles on ARM, and follow up commit will provide working SPI driver. Change-Id: Iac911ded25a6f2feffbf3101a81364625bb07746 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2182 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-04Make PCIe config options depend on PCIe supportStefan Reinauer
Change-Id: I42452a044dc75e35876fcea1736481e538eed663 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2100 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>