| Age | Commit message (Collapse) | Author |
|---|
|
Both the secondary and subordinate bus numbers are configured in this
function but it's not easy to search for in the tree as the PCI writes
are hidden inside a bigger write to 'PCI_PRIMARY_BUS'. Use separate
variables and PCI config writes to improve the readability.
Change-Id: I3bafd6a2e1d3a0b8d1d43997868a787ce3940ca9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
PCI bus 0 is not below any PCI device. In case of pci_domain_scan_bus(),
it's our virtual `domain` device.
Expecting a PCI device above bus 0 resulted in undefined behavior for
all boards with PCI. Only boards with a PCI device 00:00.0 that looked
like a PCIe bridge showed issues, though (e.g. OCP/DeltaLake).
Change-Id: I1fd68b9dc0d2e388ec2bbba4adbadd33e14f0171
Signed-off-by: Nico Huber <nico.h@gmx.de>
Fixes: commit 777ffff442 (device/pci_device.c: Scan only one device for PCIe)
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62376
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Section 7.8.6 of the PCIe spec (rev 4) indicates that some devices can
indicates support for "Resizable BARs" via a PCIe extended capability.
When support this capability is indicated by the device, the size of
each BAR is determined in a different way than the normal "moving
bits" method. Instead, a pair of capability and control registers is
allocated in config space for each BAR, which can be used to both
indicate the different sizes the device is capable of supporting for
the BAR (powers-of-2 number of bits from 20 [1 MiB] to 63 [8 EiB]), and
to also inform the device of the size that the allocator actually
reserved for the MMIO range.
This patch adds a Kconfig for a mainboard to select if it knows that it
will have a device that requires this support during PCI enumeration.
If so, there is a corresponding Kconfig to indicate the maximum number
of bits of address space to hand out to devices this way (again, limited
by what devices can support and each individual system may want to
support, but just like above, this number can range from 20 to 63) If
the device can support more bits than this Kconfig, the resource request
is truncated to the number indicated by this Kconfig.
BUG=b:214443809
TEST=compile (device with this capability not available yet),
also verify that no changes are seen in resource allocation for
google/brya0 before and after this change.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I14fcbe0ef09fdc7f6061bcf7439d1160d3bc4abf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Some SOC add PCI root busses structs at runtime without adding a
device struct to the bus because pci_scan_bus does it. An example
would be xeon_sp which has multiple root busses.
TEST: ocp/deltalake boots again.
Change-Id: I81d9c94652e34dbf9e8cec64fc34ef0042563037
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
The `pci_dev_disable_bus_master()` function doesn't need to be guarded
with `CONFIG(PC80_SYSTEM)`, so move it out of the guard.
Change-Id: I813e0f72c3c624c73ab9ecbe7512359608ace927
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Only scan one device if it's a PCIe downstream port.
A PCIe downstream port normally leads to a link with only device 0 on
it. As an optimization, scan only for device 0 in that case.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Id184d03b33e1742b18efb3f11aa9b2f81fa03806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
To ease finding some log messages, reflow their strings to use one line.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I5284429ca6d07debf2d6c4fdbffa286140fb7694
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The `irq` variable has the same value as `pIntAtoD[line - 1]`.
Change-Id: Iabf760adbc3014b32cfe6f908dc04c38b71bd980
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This guard is nested inside an identical guard already.
Change-Id: I2b315ee6620865429097041035ad493ddcc51884
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Let the linker do its job.
This fixes building with !CONFIG_PCIEXP_HOTPLUG on some platforms.
Change-Id: I46560722dcb5f1d902709e40b714ef092515b164
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It’s good practice to put the unit into the name.
Change-Id: I1493f61d4e495c22f09abf1829bb2eab9b1fd2b6
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It was commented that the need for the delay was mainly related
to external displays and only with VBIOS execution. Move the
delay such that it is done only when we actually need to execute
the VBIOS aka option rom.
A delay is currently only defined for librem/purism_bdw in
its Kconfig. As the description of the issue sounds like it
would equally happen on other platforms when VBIOS is involved,
promote the Kconfig visible option to global scope.
Change-Id: I4503158576f35057373f003586bbf76af4d59b3d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia6c7de99164682dcbcc375969403d2bfb9675f3c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Change-Id: Ia6936675684e3eaf2a57e2d28e465b1f0768249b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
Use same indents for switch/case to fix linter issues.
Change-Id: I5c6abf5b918bac3df8d7617824392f2ec932cb32
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Only two definitions are actually used somewhere, the rest is unused.
Change-Id: Iec52d0d47fce6a1ec5455b670824b995a7a34a4c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47407
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a NULL check and only skip setting the default operations
if `.ops` was set by a driver. It's fairly unlikely that some-
body adds a driver and forgets the `.ops` pointer. So this is
mostly to increase readability: Nobody should have to wonder
if we're missing a NULL-check.
The condition is moved out of the loop to reduce indentation
levels. Alternatively, we could jusk skip drivers that don't
have `.ops` set (i.e. continue the loop).
Change-Id: I5dcc05ebb092fb9c4be929c81ea2b05a10b1311b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46297
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Devices of class type "system" are arbitrary devices and it's not clear
which of them need bus mastering. Therefore, enable bus mastering
conditionally based on Kconfig option PCI_ALLOW_BUS_MASTER_ANY_DEVICE.
Change-Id: Ia04e83606a0a081c0758ec59e52627aa1dbd2622
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ic7cacce28f473dda76ca203016dbb8e00149a990
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Move this function to pci_ops.c, which is already included in the smm
build. This is required to use this function in elog functionality,
which is called from SMM.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie5583c04366c9a16bc1b00a6892d39eeafe5da49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change allows a generic device to be described in the devicetree
under a PCI device, such as a root port.
Previously any device under a PCI device was expected to also be a PCI
device and that does not allow for a virtual/generic device to be
present, for example to provide ACPI properties for a root port.
The changes are:
- Ignore non-PCI devices found under a PCI device when scanning and do
not print an error for each devfn scanned.
- Don't treat non-PCI devices as leftover and remove them, instead
enable them as a static device.
- Don't attempt to configure a static device in the tree that is not a
PCIe device type.
With these changes it is now possible to have a generic device under a
PCI device, for example in a USB4/TBT root port (PCIe hotplug device)
this generic device will add ACPI properties for the PCIe tunnel routed
to the external port:
device pci 07.0 on
chip soc/intel/common/block/pcie
device generic 0 on end
end
end
TEST=boot on volteer with the USB4 root port devices in chipset.cb and
ensure they are enabled properly and there are no errors printed in the
coreboot log, and that the device properties are created in the SSDT.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I56a491808067dc862a7adfd46852f0bd6b41cd95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46542
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function `pci_dev_is_wake_source()` that
checks PME_STATUS and PME_ENABLE bits in PM control and status
register to determine if the given device is the source of wake.
BUG=b:169802515
BRANCH=zork
Change-Id: I06e9530b568543ab2f05a4f38dc5c3a527ff391e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ief990b4174d13b3472ac75a042ae8d878640dda3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This reverts commit ad247ac5d8ef4a38bd1d61fbd28076f343a46c5c.
It doesn't work like this. The `dev->enable` field has already been
updated and is always `0` at this point.
Change-Id: I5b3560dcea2f226c841f4823526db2fdab149d22
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
One would expect disabled devices to not be present. So, don't print
misleading warnings about it, because it only confuses people.
Change-Id: I0f14174a1d460a479dc9f15b63486f4f27b8f67c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: Id3f9dd264e82f93a438422e388d70e3f88ae0df9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
A function pci_dev_disable_bus_master() is created. This function
can be used to disable Thunderbolt PCIe root ports, bridges and
devices for Vt-d based security platform at end of boot service.
BUG=None
TEST=Verified PCIe device bus master enable bit is cleared.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ie92a15bf2c66fdc311098acb81019d4fb7f68313
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>,
<stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes
each time when <types.h> is included.
Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The I/O windows of PCI bridges can be disabled individually by
setting their limit lower than their base. Always do this if a
resource wasn't assigned a value.
Change-Id: I73f6817c4b12cb1689627044735d1fed6d825afe
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This function is too long and quirky. Factor the actual resource write
out, so we can focus on the logic.
Change-Id: I6c7f930614dcd63d4ee2a4ca7cf541a9de4fd557
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
On some SoCs, there are PCI devices that may get hidden from PCI
enumeration by platform firmware. Because the Vendor ID reads back as
0xffffffff, it appears that there is no PCI device located at that BDF.
However, because the device does exist, designers may wish to hang its
PCI resources off of a real __pci_driver, as well as have it participate
in ACPI table generation.
This patch extends the semantics of the 'hidden' keyword in
devicetree.cb. If a device now uses 'hidden' instead of 'on', then it
will be assumed during PCI enumeration that the device indeed does
exist, and it will not be removed as a "leftover device." This allows
child devices to be enumerated correctly and also PCI resources can be
designated from the {read,set}_resources callbacks.
It should be noted that as of this commit, there are precisely 0 devices
using 'hidden' in their devicetree.cb files, so this should be a safe
thing to do.
Later patches will begin moving PCI resources from random places (typically
hung off of fixed SA and LPC) into the PMC device (procedure will vary per-
platform).
Change-Id: I16c2d3e1d1433343e63dfc16856cff69cd815e2a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The struct (formerly assigned to default_pci_ops_bus.ops_pci) only
contained a NULL (well, 0) pointer for the set_subsystem callback, but
usage of that callback is guarded with NULL checks when it is used,
therefore it can be removed.
TEST=still compiles
Change-Id: I3943c8ae73b95e744a317264d7ceb8929cb28341
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41432
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci_domain_set_resources is duplicated in all the SOCs. This change
promotes the duplicated function.
Picasso was adding it again in the northbridge patch. I decided to
promote the function instead of duplicating it.
BUG=b:147042464
TEST=Build and boot trembyle.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change updates the resource limit for PCI domain to allow
resource allocation above 4G boundary. The resource limit is set to
the highest physical address for the CPU.
BUG=b:149186922
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Idfcc9a390d309886ee2b7880b29502c740e6578e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39488
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves all ACPI table support in coreboot currently living
under arch/x86 into common code to make it architecture
independent. ACPI table generation is not really tied to any
architecture and hence it makes sense to move this to its own
directory.
In order to make it easier to review, this change is being split into
multiple CLs. This is change 3/5 which basically is generated by
running the following command:
$ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g'
BUG=b:155428745
Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Unmentioned fields are initialized with 0 (or NULL) implicitly. Beside
that, the struct has grown over the years. There are too many optional
fields to list them all.
Change-Id: Icb9e14c58153d7c14817bcde148e86e977666e4b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40126
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: Id5fe26564147ec532850430ea55b19ee94d5c5a5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
These two identifiers were always very confusing. We're not filling and
injecting generators. We are filling SSDTs and injecting into the DSDT.
So drop the `_generator` suffix. Hopefully, this also makes ACPI look a
little less scary.
Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: David Guckian
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This CL has changes that allow us to enable a configurable
ramstage, and one change that allows us to minimize PCI
scanning. Minimal scanning is a frequently requested feature.
To enable it, we add two new variables to src/Kconfig
CONFIGURABLE_RAMSTAGE
is the overall variable controlling other options for minimizing the
ramstage.
MINIMAL_PCI_SCANNING is how we indicate we wish to enable minimal
PCI scanning.
Some devices must be scanned in all cases, such as 0:0.0.
To indicate which devices we must scan, we add a new mandatory
keyword to sconfig
It is used in place of on, off, or hidden, and indicates
a device is enabled and mandatory. Mandatory
devices are always scanned. When MINIMAL_PCI_SCANNING is enabled,
ONLY mandatory devices are scanned.
We further add support in src/device/pci_device.c to manage
both MINIMAL_PCI_SCANNING and mandatory devices.
Finally, to show how this works in practice, we add mandatory
keywords to 3 devices on the qemu-q35.
TEST=
1. This is tested and working on the qemu-q35 target.
2. On CML-Hatch
Before CL:
Total Boot time: ~685ms
After CL:
Total Boot time: ~615ms
Change-Id: I2073d9f8e9297c2b02530821ebb634ea2a5c758e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
This change adds support for allocating resources for PCI express hotplug
bridges when PCIEXP_HOTPLUG is selected. By default, this will add 32 PCI
subordinate numbers (buses), 256 MiB of prefetchable memory, 8 MiB of
non-prefetchable memory, and 8 KiB of I/O space to any device with the
PCI_EXP_SLTCAP_HPC bit set in the PCI_EXP_SLTCAP register, which
indicates hot-plugging capability. The resource allocation is configurable,
please see the PCIEXP_HOTPLUG_* variables in src/device/Kconfig.
In order to support the allocation of hotplugged PCI buses, a new field
is added to struct device called hotplug_buses. This is defaulted to
zero, but when set, it adds the hotplug_buses value to the subordinate
value of the PCI bridge. This allows devices to be plugged in and
unplugged after boot.
This code was tested on the System76 Darter Pro (darp6). Before this
change, there are not enough resources allocated to the Thunderbolt
PCI bridge to allow plugging in new devices after boot. This can be
worked around in the Linux kernel by passing a boot param such as:
pci=assign-busses,hpbussize=32,realloc
This change makes it possible to use Thunderbolt hotplugging without
kernel parameters, and attempts to match closely what our motherboard
manufacturer's firmware does by default.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I500191626584b83e6a8ae38417fd324b5e803afc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35946
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ibb7b48a7a144421aff29acbb7ac30968ae5fe5ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
So, the PCI to PCI bridge specification had a pitfall for us:
Originally, when decoding i/o ports for legacy VGA cycles, bridges
should only consider the 10 least significant bits of the port address.
This means all VGA registers were aliased every 1024 ports!
e.g. 0x3b0 was also decoded as 0x7b0, 0xbb0 etc.
However, it seems, we never reserved the aliased ports, resulting in
silent conflicts we preallocated resources. We neither use much
external VGA nor many i/o ports these days, so nobody noticed.
To avoid this mess, a bridge control bit (VGA16) was introduced in
2003 to enable decoding of 16-bit port addresses. As older systems
seem rather safe and well tested, and newer systems should support
this bit, we'll use it if possible and only warn if not.
With old (AGP era) hardware one will likely encounter a warning like
this:
found VGA at PCI: 06:00.0
A bridge on the path doesn't support 16-bit VGA decoding!
This is not generally fatal, but makes unnoticed resource conflicts
more likely.
Change-Id: Id7a07f069dd54331df79f605c6bcda37882a602d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35516
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Before oprom is executed, no check is performed if rom passes verification.
Add call to verified_boot_should_run_oprom() to verify the oprom.
verified_boot_should_run_oprom() expects and rom address as input pointer.
*rom is added as input parameter to should_run_oprom() which must be parsed
to verified_boot_should_run_oprom()..
BUG=N/A
TEST=Created verified binary and verify logging on Facebook FBG1701
Change-Id: Iec5092e85d34940ea3a3bb1192ea49f3bc3e5b27
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I9fbefac3bef7425d6f5ea1bcc01eb21485315c36
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Additional cleanup - Unify "Inc" to "Inc." and "LLC." to "LLC"
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ie03a3ce1f6085494bd5f38da76e2467970cf301a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Every vga init implementation needs to cache the framebuffer state
to be able to fill the lb_framebuffer struct later on in the
fill_lb_framebuffer call. Showing the bootsplash afterwards
guarantees to have the same interface into all the vga drivers.
This is by far from ideal, as it only allows for a single driver at
compile-time and should be adapted in the future.
It was tested on the wip razer blade stealth using vgabios @ 1280x1024
and also in Qemu @ 1280x1024.
By default the qemu framebuffer will be initialized in 800x600@32.
This can be overwriten by configuration by setting
CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_{X,Y}RES .
Change-Id: I4bec06d22423627e8f429c4b47e0dc9920f1464e
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Caller needs to take into account that bus numbers may
have not been assigned yet. Same issue existed before
with early ramstage and mostly does not cause problems
when used with static devices on bus 0.
Change-Id: I4865b4277dbc858c8c2ffd2052defcaa1a92173c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34614
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
So far the bootsplash is only correctly rendered if the framebuffer is
set up as 1024x768@16.
Different resolutions did not show anything, differnent depth resulted
in the distorted images.
This commit removes this limit by using the actual framebuffer resolutions
and combines the code for x86 and yabel.
For the moment the bootsplash is still limited to VGA-OptionROM
framebuffer init.
It was tested in 1280x1024@32 on the wip razer blade stealth using the
intel vgabios.
Change-Id: I5ab7b8a0f28badaa16e25dbe807158870d06e26a
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34537
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7a361187570716df94a3fd441ae78c0f805b1dda
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33921
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I48c0de73338430282ce1a4442bbeb7c867dc174c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Wrap the simple romstage implementation to be called
from ramstage.
Change-Id: Iadadf3d550416850d6c37233bd4eda025f4d3960
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31755
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As of CL:1605641, vboot2 code should be used for setting and
checking display init state. Remove all vboot1 OPROM-related
code, and use the vboot2 display init code which has already
been added in previous commits.
coreboot should not be reading vboot NVRAM flags directly.
Remove the function vboot_wants_oprom(), and instead rely on
display_init_required(), which uses the
VBOOT_WD_FLAG_DISPLAY_INIT value stored in
vboot_working_data.flags, initialized during verstage.
Note that this means in the case of CONFIG_VBOOT=y, the return
value of display_init_required() can only be trusted after
verstage has been executed. This should not be a problem
assuming that all display initialization occurs in ramstage.
BUG=b:124141368, b:124192753, chromium:948529
TEST=Build locally
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ic8f9dc5a3c7f1546a8fed82bde02be4d04568f8d
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1605641, chromium:1605525
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32723
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skipping display init on normal-mode boot is a vboot feature, not
specific to Chrome OS. Fix the code in display_init_required() and
pci_dev_init() to check CONFIG_VBOOT rather than CONFIG_CHROMEOS now
that the two aren't always the same anymore.
Also add a check to guarantee at compile time that
CONFIG_VBOOT_OPROM_MATTERS is enabled on all platforms that make a check
to this function (when CONFIG_VBOOT is also enabled). The whole display
skipping mechanism is based on the oprom_needed NVRAM flag, and skipping
display init without enabling the option to tell vboot that it needs to
pay attention to that flag would make the whole thing not work right.
Change-Id: I5d6421509bdcdaa61b78015af3fa6241fe75bb7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds generic log to perform subsystem programming
based on header type.
Type 0: subsystem offset 0x2C
Type 2: subsystem offset 0x40
Type 1: Read CAP ID 0xD to know cap offset start, offset 4 to locate
subsystem vendor id.
Change-Id: Id8aed6dac24517e93cd55d6bb3b254b7b4d950d3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch removes local definitions of sub_system function and make use
of common function pci_dev_set_subsystem().
Change-Id: I91982597fdf586ab514bec3d8e4d09f2565fe56d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Guckian
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Inlining here allows the check for (dev != NULL) to be
optimised and evaluated just once inside the calling
function body.
Change-Id: I0b5b4f4adb8eaa483a31353324da19917db85f4a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I91158452680586ac676ea11c8589062880a31f91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31692
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCI config accessors are no longer indirectly included
from <arch/io.h> use <device/pci_ops.h> instead.
Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix regression introduced with commit
ad7674e device: Introduce pcidev_on_root() and friends
Function pci_scan_bus() breaks bus->children link
in the devicetree topology while scanning a bus.
While the scan is in progress, accessing PCI
devices with number higher than what is being probed
was not possible because new pcidev_on_root() relies
on having proper topology present at any time.
Change-Id: I7bb497f7390628dd2f0310b380f199783a888c4c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Change-Id: Iebb043a6fbc5803fbb7cad2f35b43917e10d09d4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28700
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In procedure pci_get_resource, when setting an IO mapped base address,
variable attr is &= with PCI_BASE_ADDRESS_IO_ATTR_MASK. However, in this
particular code flow variable attr is not used later. Remove the line.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: Ia4fdda1be92d22017a7a913a911db15aaa440b69
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Basic PCI MSI-X table helper functions.
Imported from GNU/Linux kernel PCI subsystem.
To be used on Cavium to configure MSI-X tables.
Change-Id: I94413712e7986efd17e6b11ba59f6eb390384c8c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/26329
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add timestamps before and after the vBIOS load and after the vBIOS
run. This lets us see exactly how long it took to load it from the
ROM chip, and how long it takes to run.
BUG=b:64549506
TEST=Build & boot Grunt, see vBIOS load & initialization times.
Change-Id: I878ba653eb086ad6c6614aa08a6d3fe216a9323e
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/25018
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Certain platforms require that the option rom always needs to be
ran in order for display to work correctly. Therefore, provide
this ability for the platform to select such that we force option
rom loading.
BUG=b:72400950
Change-Id: I597bc8af7ac8b68fe8505aac5f1c7e1ccd34ac27
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/23505
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use C if conditions instead of preprocessor macros.
BUG=b:72400950
Change-Id: I8107f94b9ecb6f32c569cad0bcb3d51ab39aa35c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/23504
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Write _ROM method and store PCI Option ROM in CBMEM.
Allows an EFI compatible OS to retrieve the Option ROM without the need
to access the PCI BAR. As the Option ROM is no longer present in the
legacy VGA area it's required for mobile platforms. On hybrid devices,
like Lenovo Thinkpads supporting NVIDIA Optimus it's the only way to
retrieve the Option ROM, even with legacy BIOS, as there's no PCI BAR to
map.
Tested on:
* Lenovo T530
* Linux Kernel 4.13.7
* nouveau
Change-Id: I548b730fb64833083cc05af5b21dd6959804224b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch makes pci_dev_ops_pci structure global so that
caller can make use of this structure using extern.
Change-Id: I8de919aacccbc062475fb04f59ffb4957d3460b9
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This commit just moves the vboot sources into
the security directory and fixes kconfig/makefile paths.
Fix vboot2 headers
Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch uses struct device explicitly for the ramstage functions
as that's the actual type it's working on. Additionally, the
declarations for types and functions are fully exposed so that
compliation units don't have to guard certain functions from use
because it's being compiled for multiple stages.
Change-Id: I8db23ed400a59073e1e66522d020a5928f71f3a6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Some of these can be changed from #if to if(), but that will happen
in a follow-on commmit.
Change-Id: I66cde1adcf373889b03f144793c0b4f46d21ca31
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Write vendor/device id to subsystem vendor/device id
if they are not provided.
Change-Id: I5027331a6adf9109767415ba22dfcb17b35ef54b
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/19467
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Add VFCT table to provide PCI Optiom Rom for
AMD graphic devices.
Useful for GNU Linux payloads and embedded dual GPU systems.
Tested on Lenovo T500 with AMD RV635 as secondary gpu.
Original Change-Id: I3b4a587c71e7165338cad3aca77ed5afa085a63c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Change-Id: I4dc00005270240c048272b2e4f52ae46ba1c9422
Reviewed-on: https://review.coreboot.org/18192
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We have kconfig.h auto-included and it pulls config.h too.
Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17655
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: I5e5180ec4303a121609b4acffb284daea6b08379
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14325
Reviewed-by: Myles Watson <mylesgw@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Certain devices, such as the Intel 82575GB, contain multiple nested
PCIe bridges (for example the PES12N3A). Coreboot does not set
the primary bus number of the lower bridges, causing upstream
forwarding failure. This in turn causes coreboot to fail to find
the lowest devices (in this case the NICs), and as a result the
required resources are not allocated and the NICs do not function.
Change-Id: I4fd3aa21a04dbe89ac6a5995e7707af914d432b1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12186
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
To help hypervisors to assign PCI devices individually to virtualization
guests, page align dynamically allocated MMIO resources.
Tested with kontron/ktqm77 which has dynamically configured onboard
devices on the root bus and secondary buses. Booted Linux and checked
the configuration with `lspci -v`. Got the configuration through Muen's
tools which are very picky about overlapping and alignment. Booted a
Muen based system that uses many onboard devices. GMA, xHCI and one NIC
(on a secondary bus) were verified to function properly.
Change-Id: I2b7115070e1ccad64565feff025289732c3b5e66
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/12111
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to prepare for more unification of the linker
scripts prefix pci_drivers, epci_drivers, cpu_drivers, and
ecpu_drivers with an underscore.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built different boards includes ones w/ and w/o relocatable
ramstage.
Change-Id: I8918b38db3b754332e8d8506b424f3c6b3e06af8
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11506
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The input/output value max is no longer used for tracking the
bus enumeration sequence, everything is handled in the context
of devicetree bus objects.
Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8541
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ifd277992a69a4182e2fac92aaf746abe4fec2a1b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8540
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib33d3363c8d42fa54ac07c11a7ab2bc7ee4ae8bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8539
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Parameter max is the cumulative number of PCI buses scanned on the
system so far. Use the property subordinate from the parent PCI bridge
device to keep track of the first available bus number instead of
passing that on the stack.
Change-Id: I1a884c98d50fa4f1eb2752e10b778aea8a7b090a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8537
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I1766c92abe7a74326c49df74ba38930a502fcb5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8536
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the PCI root node, input parameter max==0 and output value
max is not relevant for operation.
Change-Id: I23adab24aa957c4d51d703098a9a40ed660b4e6c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8855
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
All boards in tree use 0. Looks like this is all work that was
never completed and tested.
We also have static setting sysconf.segbit=0 which would conflict
with PCI_BUS_SEGN_BITS>0.
Having PCI_BUS_SEGN_BITS>0 would also require PCI MMCONF support
to cover over 255 buses.
Change-Id: I060efc44d1560541473b01690c2e8192863c1eb5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8554
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There is no auto-detection for AGP type and we have no hardware that
selects this. Furthermore, we treat AGP bridges just like PCI bridges,
there is no optimisation for higher bandwidth.
Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8367
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Add missing parameters
- add missing @param commands
Change-Id: I029b5dafde94bd250800b06c0e9bd2118f10ef48
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8173
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The doxygen parameter names in the comments no longer matched the
functions they were attached to. Doxygen complains about extra
parameter comments and uncommented parameters in the functions.
Change-Id: I21b8a951f8d8d04b07c3779000eeaf1e69fed463
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8101
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I6254f4ab767952cc8ff31bb462c7037b027442ba
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6079
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I6f9c992f1a68025ed18de57c5856b3bf9a673bfb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6075
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The PCI Specification states that devices that implement
a bridge and a secondary bus must swizzle (rotate) the
interrupt pins according to the table below:
Child Dev # Child PIN Parent PIN
0,4,8,12... A/B/C/D A/B/C/D
1,5,9,13... A/B/C/D B/C/D/A
2,6,10,14.. A/B/C/D C/D/A/B
3,7,11,15.. A/B/C/D D/A/B/C
Which is also described by this equation:
PIN_parent = (Pin_child + Dev_child) % 4
When a device is found and its bus number is greater than 0,
it is on a bridge and needs to be swizzled. Following the
string of parents up to the root bus and swizzling as we go
gives us the desired swizzling result. When BIOS_SPEW is
defined, it will print out each step of the swizzling process.
Change-Id: Icafeadd01983282c86e25f560c831c9482c74e68
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5734
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
|
|
Builds with CHROMEOS can bypass VGA oprom when boot is not in
developer or recovery modes. Have the same functionality available
without CHROMEOS but with BOOTMODE_STRAPS.
Change-Id: I97644364305dc05aad78a744599476ccc58db163
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5595
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
A global flag oprom_is_loaded was used to indicate to
U-boot that VGA option ROM was loaded and run, or that
native VGA init was completed on GMA device.
Implement this feature without dependency to CHROMEOS option
and replace use of global variable oprom_is_loaded with call
to gfx_get_init_done().
Change-Id: I7e1afd752f18e5346dabdee62e4f7ea08ada5faf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4309
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Certain kernel drivers require the presence of option rom
contents because the board's static configuration information
is located within the blob. Therefore, allow a chipset/board to
instruct the pci device handling code to always load but not
necessarily run the option rom.
BUG=chrome-os-partner:25885
BRANCH=baytrail
TEST=Both enabling and not enabling this option shows expected behavior.
Change-Id: Ib0f65ffaf1a861b543573a062c291f4ba491ffe0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/188720
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5594
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
The main purpose of option rom is to supply int* handlers.
But supplying those is outside of coreboot scope and if someone needs those
they should run SeaBIOS anyway which runs the option roms wonderfully.
Running VGA oprom is kept because they're needed to init graphics.
This patch still keeps the options to include the option roms to make them
available to SeaBIOS.
Change-Id: I646334cf88094d3bf8f527779a68a07e0b4b93ec
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4545
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
|
|
These can typically be set in the devicetree but we need a way to
override those values with a Kconfig setting so as not to expose
the Vendor ID before the product has launched.
Change-Id: Ib382e6d9359d24b128c693a657ffde52604efad3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65310
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4455
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
