summaryrefslogtreecommitdiff
path: root/src/device/Kconfig
AgeCommit message (Collapse)Author
2021-01-10device: Add new Kconfig VGA_ROM_RUN_DEFAULT for mainboard userSubrata Banik
Platform can now select VGA_ROM_RUN_DEFAULT Kconfig to perform graphics initialization for PCI-E based discrete card through VGA OpRom (SoC or Mainboard user can't select VGA_ROM_RUN directly because it's part of choice option). (Note: Some payloads, like SeaBIOS, are also able to run Option ROMs, so coreboot does not need to enable VGA_ROM_RUN Kconfig) For payload like depthcharge, create VGA_ROM_RUN_DEFAULT Kconfig for mainboard to select design with DGPU where OpROM is embedded inside the DGPU card. Allow auto selection of VGA_ROM_RUN_DEFAULT from VGA_BIOS Kconfig. Also NO_GFX_INIT Kconfig to avoid running VGA_ROM_RUN by default in case SeaBIOS is used. TEST=Able to get Pre-OS splash screen with AMD Radeon RX 5700 PCI-E DGPU when mainboard user selects VGA_ROM_RUN_DEFAULT. Change-Id: Iecb2fcdb105af449bc20ad727759cdef17d5e376 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49016 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-25device: Drop unused HyperTransport codeAngel Pons
Only two definitions are actually used somewhere, the rest is unused. Change-Id: Iec52d0d47fce6a1ec5455b670824b995a7a34a4c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47407 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16device: Allow configuring bus mastering for PCI bridges conditionallyFelix Singer
Change-Id: Ic7cacce28f473dda76ca203016dbb8e00149a990 Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-02device: Rework bus master optionFelix Singer
As an intermediate step for CB:45150, add an additional Kconfig option which is used to configure bus mastering for any devices and use PCI_ALLOW_BUS_MASTER to allow coreboot setting the bus mastering bit in general. Change-Id: I33b37a79022007a16e97350db61575b63fa8256b Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45149 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27device: Rephrase bus master Kconfig optionFelix Singer
Change-Id: I902915133035fb2adff7edd9c931d4b1d3e7dc40 Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-20lint: check for misuse of Kconfig SUBSYSTEM_*_IDMichael Niewöhner
Check that nobody misuses the Kconfigs SUBSYSTEM_*_ID. They are meant to be used for overriding the devicetree subsystem ids locally but shall not be added to a board's Kconfig. Instead, the devicetree option `subsystemid` should be used. Add a linter script for this that finds and warns about such misuse. Also add a note in the Kconfigs' description. TEST=CB:45513 Change-Id: I21c021c718154f1396f795a555af47a76d6efe03 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-31device: Add method to configure bus mastering based on KconfigFelix Singer
The bus master bit is set at many places in coreboot's code, but the reason for that is not quite clear. We examined not setting the bus master bit whereever possible and tried booting without it, which worked fine for internal PCI devices but not for PCIe. As a PCIe device we used a Samsung M.2 NVMe SSD. For security reasons, we would like to disable bus mastering where possible. Depending on the device, bus mastering might get enabled by the operating system (e.g. for iGPU) and it might be required for some devices to work properly. However, the idea is to leave it disabled and configure the IOMMU first before enabling it. To have some sort of "backwards compatibility", add a method which configures bus mastering based on an additional config option. Since CB:42460 makes usage of this treewide, enable it by default to keep the current behaviour for now. Tested with Siemens/Chili, a Coffee Lake based platform. Change-Id: I876c48ea3fb4f9cf7b6a5c2dcaeda07ea36cbed3 Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42459 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-18src/device/Kconfig: Introduce WANT_LINEAR_FRAMEBUFFERAngel Pons
This decouples the linear framebuffer type from the symbols needing it. Change-Id: I733e630e0aa2fb2947d079caef26253ce443fe91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42432 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10device/xhci: Add xHCI utility to enumerate capabilitiesRaul E Rangel
This will allow enumerating an xHCI controller to allow dynamically generating the ACPI device nodes. BUG=b:154756391 TEST=Boot trembyle and see capabilities printed on console xHCI Supported Protocol: Major: 0x2, Minor: 0x0, Protocol: 'USB ' Port Offset: 1, Port Count: 2 xHCI Supported Protocol: Major: 0x3, Minor: 0x10, Protocol: 'USB ' Port Offset: 3, Port Count: 1 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3065c3fffad01b5378a55cfe904f971079b13d0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/41899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-28Revert "Revert "pciexp_device: Add option to allocate prefetch memory above ↵Furquan Shaikh
4G boundary"" This reverts commit e15f352039a371156ceef37f0434003228166e99. Reason for revert: Resource allocator is split into old(v3) and new(v4). So, this change to provide an option to allocate prefetch memory above 4G boundary can be added back. Since the support for allocating above 4G boundary is available only in resource allocator v4, Kconfig option is accordingly updated to add depends on RESOURCE_ALLOCATOR_V4. Change-Id: I94e5866458c79c2719fd780f336fb5da71a7df66 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41467 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26device: Switch to resource allocator v4 by default treewideFurquan Shaikh
This change disables the old resource allocator by default and instead uses the new v4 resource allocator. Only the chipsets that explicitly select RESOURCE_ALLOCATOR_V3 will continue to use the old v3 resource allocator. Change-Id: I2ab9f1d612b5f193f058011a18b1d6373e09f788 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-05-26device: Add support for resource allocator v4Furquan Shaikh
This change adds back support for the resource allocator using multiple ranges as originally landed in CB:39486(commit hash 3b02006) and reverted in CB:41413(commit hash 6186cbc). The new resource allocator can be selected by Kconfig option RESOURCE_ALLOCATOR_V4. It was identified that there are some AMD chipsets in the tree that do not really work well with the dynamic resource allocation. Until these chipsets are fixed, old (v3) and new (v4) of the resource allocator need to live side-by-side in the tree. There were some other chipsets in the tree which originally demonstrated problems with the new resource allocator, but have been since fixed in the tree. This change picks up the same additions as performed in CB:39486 along with the following changes: 1. Changes to avoid fixed resources in the entire tree. Use of search_bus_resources() is replaced with a walk of the entire tree in avoid_fixed_resources(). This is required to ensure that all fixed resources added to any device (including domain) are taken into consideration to avoid overlap during dynamic resource allocation. 2. Changes to set up alignment for memranges when initializing them. This is done to ensure that the right granularity is used for IORESOURCE_IO(no special alignment) and IORESOURCE_MEM(4KiB) resource requests. 3. mark_resource_invalid() is dropped as the resource no longer needs to be marked in any special way if allocation is not being done. Instead setting of IORESOURCE_ASSIGNED flag is skipped in this case. 4. initialize_memranges() is updated to check IORESOURCE_ASSIGNED instead of base == limit. Original commit message: This change updates the resource allocator in coreboot to allow using multiple ranges for resource allocation rather than restricting available window to a single base/limit pair. This is done in preparation to allow 64-bit resource allocation. Following changes are made as part of this: a) Resource allocator still makes 2 passes at the entire tree. The first pass is to gather the resource requirements of each device under each domain. It walks recursively in DFS fashion to gather the requirements of the leaf devices and propagates this back up to the downstream bridges of the domain. Domain is special in the sense that it has fixed resource ranges. Hence, the resource requirements from the downstream devices have no effect on the domain resource windows. This results in domain resource limits being unmodified after the first pass. b) Once the requirements for all the devices under the domain are gathered, resource allocator walks a second time to allocate resources to downstream devices as per the requirements. Here, instead of maintaining a single window for allocating resources, it creates a list of memranges starting with the resource window at domain and then applying constraints to create holes for any fixed resources. This ensures that there is no overlap with fixed resources under the domain. c) Domain does not differentiate between mem and prefmem. Since they are allocated space from the same resource window at the domain level, it considers all resource requests from downstream devices of the domain independent of the prefetch type. d) Once resource allocation is done at the domain level, resource allocator walks down the downstream bridges and continues the same process until it reaches the leaves. Bridges have separate windows for mem and prefmem. Hence, unlike domain, the resource allocator at bridge level ensures that downstream requirements are satisfied by taking prefetch type into consideration. e) This whole 2-pass process is performed for every domain in the system under the assumption that domains do not have overlapping address spaces. Noticeable differences from previous resource allocator: a) Changes in print logs observed due to flows being slightly different. b) Base, limit and size of domain resources are no longer updated based on downstream requirements. c) Memranges are used instead of a single base/limit pair for determining resource allocation. d) Previously, if a resource request did not fit in the available base/limit window, then the resource would be allocated over DRAM or any other address space defeating the principle of "no overlap". With this change, any time a resource cannot fit in the available ranges, it complains and ensures that the resource is effectively disabled by setting base same as the limit. e) Resource allocator no longer looks at multiple links to determine the right bus for a resource. None of the current boards have multiple buses under any downstream device of the domain. The only device with multiple links seems to be the cpu cluster device for some AMD platforms. Change-Id: Ide4d98528197bb03850a8fb4d73c41cd2c0195aa Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41443 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26device: Move resource allocation into a separate compilation unitFurquan Shaikh
This change moves the resource allocator functions out of device.c and into two separate files: 1. resource_allocator_v3.c: This is the old implementation of resource allocator that uses a single window for resource allocation. It is required to support some AMD chipsets that do not provide an accurate map of allocated resources by the time the allocator runs. They work fine with the old allocator since it restricts itself to allocations in a single window at the top of the 4G space. 2. resource_allocator_common.c: This file contains the functions that can be shared by the old and new resource allocator. Entry point into the resource allocation is allocate_resources() which can be implemented by both old and new allocators. This change also adds a Kconfig option RESOURCE_ALLOCATOR_V3 which enables the old resource allocator. This config option is enabled by default currently, but in the following CLs this will be enabled only for the broken boards. Reason for this split: Both the old and new resource allocators need to be retained in the tree until the broken chipsets are fixed. Change-Id: I2f5440cf83c6e9e15a5f22e79cc3c66aa2cec4c0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41442 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-16Revert "pciexp_device: Add option to allocate prefetch memory above 4G boundary"Furquan Shaikh
This reverts commit dcbf6454b6d2d9b3627a14126ef20ed4b9c7d954. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. Change-Id: I58c9fff1a18ea1c9941e29c2c6e60e338c517c30 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-05-12pciexp_device: Add option to allocate prefetch memory above 4G boundaryFurquan Shaikh
This change adds a Kconfig option to request allocation of prefetch memory for hotplug devices above the 4G boundary. In order to select this option by default and still allow users to disable this if required, another option is added to request allocation of prefetch memory below 4G boundary which defaults to n but can be overriden by mainboards. Without this change, if the number of pciexp bridges supporting hot-plug is more than 4 or if the reserved prefetch memory size for hot-plug cases was increased, then the resource allocator would fail to satisfy the resource requirement below 4G boundary. BUG=b:149186922 TEST=Enabled resource allocation above 4G for prefetch memory on volteer and verified that it gets allocated above 4G boundary. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I061d935eef9fcda352230b03b5cf14e467924e50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39489 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-31device/Kconfig: fix circular dependency for RUN_FSP_GOPMatt DeVillier
Change Graphics Init default for RUN_FSP_GOP to depend on INTEL_GMA_HAVE_VBT rather than INTEL_GMA_ADD_VBT, since RUN_FSP_GOP selects INTEL_GMA_ADD_VBT for several Intel SoC's. Test: create default config for gogle/cyan, RUN_FSP_GOP still default display init selection but no more circular dependency warning from config. Change-Id: I8b978d9938c3d0024d4dd40000b988430664cee7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-29src/device/Kconfig: Adjust Graphics init defaultsMatt DeVillier
Adjust the defaults for Graphics Initialization so that the "best" option for a board is selected by default. Net effect is to select RUN_FSP_GOP over VGA_ROM_RUN in cases where the platform supports GOP init and the mainboard has a VBT file included. Test: run 'make menuconfig' and check default Display Init option for google/cyan, observe RUN_FSP_GOP is default. Change-Id: I2184dbdd943d035d1682b3ae7bd8d005221434b1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-25src/device: Add option to look at revision in option romsMartin Roth
AMD's Family 17h SOCs have the same vendor and device IDs for their graphics blocks, but need different video BIOSes. The only difference is the revision number. Add a Kconfig option that allows us to add the revision number of the graphics device to the PCI option rom saved in CBFS. Because searching CBFS takes a non-trivial amount of time, only enable the option if it's needed. If it's not used, or if nothing matches, the check will fall through and search for an option rom with no version. BUG=b:145817712 TEST=With surrounding patches, loads dali vbios Change-Id: Icb610a2abe7fcd0f4dc3716382b9853551240a7a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/2013181 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-25arch/x86: Add Kconfig option for 2nd VGA BIOS imageMartin Roth
Picasso and Dali need different video bioses even though they use the same code in most other places. The Kconfig symbol names are changed from the downstream commit to make them more consistent with current coreboot code. BUG=b:145817712 TEST=Build Dali vBIOS into the coreboot image Change-Id: Ide0d061fda0abc78a74ddf97ba81fc3cf2b02e4f Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1956534 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-02-24device/Kconfig: select linear framebuffer for TianocoreMatt DeVillier
Automatically select the linear framebuffer mode option if available when Tianocore selected as payload, since VGA text mode will not work properly with the default Tianocore payload. Change-Id: Ic36fd035526f3efd00ffa12ad613fbac304b18cf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-02-17treewide: capitalize 'BIOS'Elyes HAOUAS
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'. Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-05pciexp: Add support for allocating PCI express hotplug resourcesJeremy Soller
This change adds support for allocating resources for PCI express hotplug bridges when PCIEXP_HOTPLUG is selected. By default, this will add 32 PCI subordinate numbers (buses), 256 MiB of prefetchable memory, 8 MiB of non-prefetchable memory, and 8 KiB of I/O space to any device with the PCI_EXP_SLTCAP_HPC bit set in the PCI_EXP_SLTCAP register, which indicates hot-plugging capability. The resource allocation is configurable, please see the PCIEXP_HOTPLUG_* variables in src/device/Kconfig. In order to support the allocation of hotplugged PCI buses, a new field is added to struct device called hotplug_buses. This is defaulted to zero, but when set, it adds the hotplug_buses value to the subordinate value of the PCI bridge. This allows devices to be plugged in and unplugged after boot. This code was tested on the System76 Darter Pro (darp6). Before this change, there are not enough resources allocated to the Thunderbolt PCI bridge to allow plugging in new devices after boot. This can be worked around in the Linux kernel by passing a boot param such as: pci=assign-busses,hpbussize=32,realloc This change makes it possible to use Thunderbolt hotplugging without kernel parameters, and attempts to match closely what our motherboard manufacturer's firmware does by default. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I500191626584b83e6a8ae38417fd324b5e803afc Reviewed-on: https://review.coreboot.org/c/coreboot/+/35946 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-04device/smbus: Drop SMBUS_HAS_AUX_CHANNELSKyösti Mälkki
The guarded prototypes are no longer implemented in the tree. Change-Id: I5bfedde2aaf691826e7537eceb8578a855800ea2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-03device/Kconfig: make sure display can't be selected by accidentMichael Niewöhner
Make sure display can't be selected by accident when NO_GFX_INIT is selected. Change-Id: Iec5a47f84b8c776a45edc6f4b31a03b9ac714b4e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-20device: Add back dummy HT_CHAIN_UNITID_BASEKyösti Mälkki
This should be defined by mainboard. Add a dummy default to fix master while HyperTransport files are still around referencing this. Change-Id: I58188a200a2cad5fa20affee1844117ba71ac338 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37036 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01console/kconfig: Move ONBOARD_VGA_IS_PRIMARY to 'devices'Arthur Heymans
This has nothing to do with console options. This also improves the help text to reflect what it actually does. Change-Id: I039f4f6bbe144769d6a362192b225838ed3d9d43 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-27device: add Kconfig option to hide GOP initialization optionMichael Niewöhner
There are mainboards that do not have any graphics ports connected to the SoC. It would be senseless to initialize the iGD, thus add a new mainboard Kconfig to hide the GOP option. Change-Id: Ica3b3a7a0c8120c95412369a24d8d669fb59fded Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-17AUTHORS: Move src/device copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional cleanup - Unify "Inc" to "Inc." and "LLC." to "LLC" Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie03a3ce1f6085494bd5f38da76e2467970cf301a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-15lib/coreboot_table: Show splashscreen in lb_table_initJohanna Schander
Every vga init implementation needs to cache the framebuffer state to be able to fill the lb_framebuffer struct later on in the fill_lb_framebuffer call. Showing the bootsplash afterwards guarantees to have the same interface into all the vga drivers. This is by far from ideal, as it only allows for a single driver at compile-time and should be adapted in the future. It was tested on the wip razer blade stealth using vgabios @ 1280x1024 and also in Qemu @ 1280x1024. By default the qemu framebuffer will be initialized in 800x600@32. This can be overwriten by configuration by setting CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_{X,Y}RES . Change-Id: I4bec06d22423627e8f429c4b47e0dc9920f1464e Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-24device: Default to VESA/linear framebuffer for ChromeOSNico Huber
Building for ChromeOS implies the use of Depthcharge which doesn't support legacy text mode. Change-Id: I7fd82bfed1e59de2de75419cfaea6f0c19cfdf5e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34483 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27drivers/intel/gma: Make libgfxinit available w/o gfxinitNico Huber
We might want to make use of libgfxinit functions without using it for actual graphics init. Change-Id: I29c3b19989acb678d0d447e83d38bad9d584caa9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31455 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-07src/device/Kconfig: Include the discrete VGA OpROM at config UIMike Banon
Create the way of adding the discrete VGA OpROM at config UI (alternative to ./cbfstool ./cb.rom add -f vgabios_dgpu.bin -n pci1002,6663.rom -t optionrom ) DGPU options are accessible only if CONFIG_VGA_BIOS is enabled. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I0a7bf0fe95c833cf3df0c7cb20fc27b6ab218c5a Reviewed-on: https://review.coreboot.org/c/coreboot/+/31449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-25src/device/Kconfig: Change default VESA mode from 117h to 118hMike Banon
Change default VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console) from 117h (1024x768 64k-color (5:6:5)) to 118h (1024x768 16.8M-color (8:8:8)) mode. This provides console output at Lenovo G505S even if e.g. GRUB is the payload, while it is unlikely to cause any downsides for the other boards. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ia348199bbd430532b1399706dd84490c9680b5f5 Reviewed-on: https://review.coreboot.org/c/31595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-02-06libgfxinit: Add options to limit framebuffer sizeNico Huber
Add maximum width and height options and set the default to 2560x1600 (WQXGA). The framebuffer will be scaled up to the displays' native resolutions. So this should help with tiny fonts on high-DPI displays. For laptops, reasonable defaults can be set at the mainboard level. Change-Id: I47fba063629260c3a2854caf7a73f1a1e933d063 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-21cpu/amd/geode_lx: Drop supportArthur Heymans
These chips are still using LATE_CBMEM which was agreed upon to be removed after release 4.7. It is now more than 1 year later and they still linger around. The work and review to bring this code up to date can happen on the 4.9 branch and then squashed together and merged back into mainline when done. Change-Id: I11290a5e92397b9b7e7e5a19b029278e728671a3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-30arch/power8: Rename to ppc64Jonathan Neuschäfer
POWER8 is a specific implementation of ppc64, which is by now outdated (POWER9 has been on the market for a while). Rename arch/power8/ to potentially cover a wider range of hardware. TEST=Toolchains built before/after this commit can build coreboot for emulation/qemu-power8 from before/after this commit. Change-Id: I2d6f08b12a9ffc8a652ddcd6f24ad85ecb33ca52 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2018-06-12drivers/intel/gma: Unify VBT related Kconfig namesNico Huber
Shuffle words and drop the _DATA_FILE suffix. Change-Id: I0b0d50ea729e5580c0bc7b43f250ff387ce59cfc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-06drivers/intel/gma: Include mainboard data.vbtArthur Heymans
This adds a INTEL_GMA_VBT_HAVE_DATA_FILE Kconfig option for the path to point to the mainboard dir and to select INTEL_GMA_ADD_VBT_DATA_FILE by default. Change-Id: I730cb0737945631e2d5379a9e26b8c039ec6dc49 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-04device: Only expose VGA_ROM_RUN on supported architecturesPatrick Rudolph
The yabel emulator depends on IO ports, that aren't available on ARM and MIPS. Add additional dependencies to fix compilation errors with the default configuration. Change-Id: If0e28b356c01cb3ae0739a54aa3531a2acedbfbb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26754 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-01Add a default path for vbt.binArthur Heymans
FSP_GOP needs a vbt.bin to work but before this patch it was able to build with the default configuration which was an empty path for vbt.bin. To make Jenkins happy don't select FSP_GOP by default, at least until all boards have the proper vbt blobs in the blobs repo. Change-Id: Ibc36d6d4dd1a56c53819b169e6f4799ce3c23e03 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-01device: add ALWAYS_RUN_OPROM optionAaron Durbin
Certain platforms require that the option rom always needs to be ran in order for display to work correctly. Therefore, provide this ability for the platform to select such that we force option rom loading. BUG=b:72400950 Change-Id: I597bc8af7ac8b68fe8505aac5f1c7e1ccd34ac27 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23505 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-15Intel i82830 boards & chips: Remove - using LATE_CBMEM_INITMartin Roth
All boards and chips that are still using LATE_CBMEM_INIT are being removed as previously discussed. If these boards and chips are updated to not use LATE_CBMEM_INIT, they can be restored to the active codebase from the 4.7 branch. chips: cpu/intel/socket_mFCBGA479 northbridge/intel/i82830 Mainboards: mainboard/rca/rm4100 mainboard/thomson/ip1000 Change-Id: I9574179516c30bb0d6a29741254293c2cc6f12e9 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/22032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-04Kconfig: Move and rename ADD_VBT_DATA_FILEPatrick Rudolph
Move ADD_VBT_DATA_FILE to "Devices" menu and rename it to INTEL_GMA_ADD_VBT_DATA_FILE. Depend on Intel platforms to avoid confusing users of non-Intel platforms. The Intel GMA driver will use the vbt.bin, if present, to fill the ACPI OpRegion. Change-Id: I688bac339c32e9c856642a0f4bd5929beef06409 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-08fsp/gop: Add running the GOP to the choice of gfx initNico Huber
The new config choice is called RUN_FSP_GOP. Some things had to happen on the road: * Drop confusing config GOP_SUPPORT, * Add HAVE_FSP_GOP to chipsets that support it, * Make running the GOP an option for FSP2.0 by returning 0 in random VBT getters. Change-Id: I92f88424004a4c0abf1f39cc02e2a146bddbcedf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-08device/Kconfig: Put gfx init methods into a `choice`Nico Huber
Provide all gfx init methods as a Kconfig `choice`. This elimates the option to select native gfx init along with running a Video BIOS. It's been only theoretically useful in one corner case: Hybrid graphics where only one controller is supported by native gfx init. Though I suppose in that case it's fair to assume that one would use SeaBIOS to run the VBIOS. For the case that we want the payload to initialize graphics or no pre-boot graphics at all, the new symbol NO_GFX_INIT was added to the choice. If multiple options are available, the default is chosen as follows: * NO_GFX_INIT, if we add a Video BIOS and the payload is SeaBIOS, * VGA_ROM_RUN, if we add a Video BIOS and the payload is not SeaBIOS, * NATIVE_VGA_INIT, if we don't add a Video BIOS. As a side effect, libgfxinit is now an independent choice. Change-Id: I06bc65ecf3724f299f59888a97219fdbd3d2d08b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
MAINBOARD_FORCE_NATIVE_VGA_INIT is to be selected instead of the user option MAINBOARD_DO_NATIVE_VGA_INIT. The distinction is necessary to use the latter in a choice. Change-Id: I689aa5cadea9e1091180fd38b1dc093c6938d69c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-06device/Kconfig: Move "Display" menu below gfx optionsNico Huber
Make the "Display" menu a submenu of "Devices", place it below the graphics options and reorder options by their dependencies. Change-Id: I9de3d8f76ae10b0a77678ce2d71f840fac32379c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19806 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04Kconfig: Add choice of framebuffer modeNico Huber
Rename `FRAMEBUFFER_KEEP_VESA_MODE` to `LINEAR_FRAMEBUFFER` and put it together with new `VGA_TEXT_FRAMEBUFFER` into a choice. There are two versions of `LINEAR_FRAMEBUFFER` that differ only in the prompt and help text (one for `HAVE_VBE_LINEAR_FRAMEBUFFER` and one for `HAVE_LINEAR_FRAMEBUFFER`). Due to `kconfig_lint` we have to model that with additional symbols. Change-Id: I9144351491a14d9bb5e650c14933b646bc83fab0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-04device/Kconfig: Clarify ON_DEVICE_ROM_LOADNico Huber
It's only used for VGA ROMs. Change-Id: I898765f79cbf5ccce871a3598b56eda83e5efaca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-30lib/edid: Split out fill_lb_framebuffer()Nico Huber
Place it into new edid_fill_fb.c, and invert the logic of the Kconfig guard (NATIVE_VGA_INIT_USE_EDID is now !NO_EDID_FILL_FB). It has to be selected by all drivers that use MAINBOARD_DO_NATIVE_VGA_INIT but pro- vide their own fill_lb_framebuffer() implementation. Change-Id: I90634b835bd8e2d150b1c714328a5b2774d891bd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-03lib/edid.c: Allow use of when not NGIArthur Heymans
Change-Id: I8709e3e61686979137b08d24efad903700d18e0b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-08libgfxinit: Select CONFIG_VGA when neededNico Huber
This wasn't caught earlier because many boards select it manually. Change-Id: I245ef8f44923b5384123bd549570db7c348e03b8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18771 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-10ddr3 spd: move accessor code into lib/spd_bin.cPatrick Georgi
It's an attempt to consolidate the access code, even if there are still multiple implementations in the code. Change-Id: I4b2b9cbc24a445f8fa4e0148f52fd15950535240 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18265 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-29Kconfig: Document what ASPM meansJonathan Neuschäfer
Change-Id: I57dd933ad70ffac95388d832bd5047f2225688e3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17973 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-19drivers/intel/gma: Add textmode support with libgfxinitNico Huber
Add an alternative gfxinit implementation for textmode. The legacy VGA plane and textmode is configured through coreboot provided functions. libgfxinit uses this plane as alternative to the usual high resolution plane. Change-Id: Iad0754c50fc6faec35f49583fe1c7cb50ac6c0c5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17279 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01PCIEXP_PLUGIN_SUPPORT: Change dependency on PCI accessKyösti Mälkki
Some PCI-e capability registers are located starting from 0x100, these are not accessible using the conventional PCI IO config operations at 0xcf8/0xcfc, unless PCI_CFG_EXT_IO was selected. Thus any feature that calls pciexp_find_extended_cap() depends on either MMCONF_SUPPORT_DEFAULT or PCI_CFG_EXT_IO being enabled on the platform. In theory there can be system without MMCONF_SUPPORT, but with complete PCI Express configuration space available using PCI_CFG_EXT_IO. Do not use explicit PCI MMCONF operations here, but rely on the default PCI access method to be able to access all of the configuration space. While at it, convert to IS_ENABLED() everywhere in the source and organize Kconfig file better. Change-Id: Ica6e16d2fb2adc532e644c4b2c47806490235715 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17546 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-29drivers/intel/gma: Hook up libgfxinitNico Huber
Add `libgfxinit` as another option for native graphics initialization. For that, the function gma_gfxinit() (see drivers/intel/gma/i915.h) has to be called by the respective northbridge/soc code. A mainboard port needs to select `CONFIG_MAINBOARD_HAS_LIBGFXINIT` and implement the Ada package `GMA.Mainboard` with a single function `ports` that returns a list of ports to be probed for displays. v2: Update 3rdparty/libgfxinit to its latest master commit to make things buildable within coreboot. v3: Another update to 3rdparty/libgfxinit. Including support to select the I2C port for VGA. Change-Id: I4c7be3745f32853797d3f3689396dde07d4ca950 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-04-13payloads: add iPXE 'payload' buildMartin Roth
We already have the ability to add a pxe rom to cbfs, but it needs to be configured and built separately. This moves the existing Kconfig options for PXE from device/Kconfig and the top level Makefile.inc to payloads, and adds the option to download and build iPXE as part of the coreboot build process. This configures the serial output of iPXE to match coreboot's serial port configuration by editing the .h files. iPXE doesn't give any real build-time method of setting these configuration options. Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-05Kconfig: hide useless options on ARM.Vladimir Serbinenko
Those options have no effect or lead to compile error on ARM due to fundamental incompatibilities. Add proper "depends on" clauses to hide them. Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13904 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-16device/pci_rom: Rename missleading ON_DEVICE_ROM_RUNPatrick Rudolph
The Kconfig option "ON_DEVICE_ROM_RUN" suggests that PCI Option ROMs are run, but in fact it only controls the loading of PCI based Option ROMs. At the moment coreboot only executes Option ROMs if they are VGA Options ROMs and the VGA Option ROM execution flag is enabled. Setting ON_DEVICE_ROM_RUN with VGA Option ROM execution disabled has no effect. Clarify that this flag controls the loading behaviour and not the execution behaviour. Change-Id: Ie3e503cb145f9b7ce613755e60ac0f6c00f2bcdb Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13684 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-25Separate bootsplash image menuconfig option from othersKonstantin Aladyshev
The possibility of adding a bootsplash image to ROM should be independent from VGA_ROM_RUN and VESA menuconfig options. For example, the stored image could be saved in CBFS not for coreboot but for later use in SeaBIOS. Change-Id: I3a0ed53489c40d4d44bd4ebc358ae6667e6c797f Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/12129 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24southbridge/amd/sb700: Allow use of auxiliary SMBUS controllerTimothy Pearson
Change-Id: I29ece10eeefc2c75a3829c169f1e1aede7194ec2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12079 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2015-08-30Kconfig: Remove EXPERT modeAlexandru Gagniuc
After much consideration, and many years of an EXPERT mode sitting almost completely unused, we've seen that it doesn't work for us. There is no standard on what constitutes EXPERT, and most of coreboot's options Kconfig are expert-level. We even joked that not selecting "EXPERT" should prevent coreboot from compiling: @echo $(shell whoami) is not permitted to compile coreboot Change-Id: Ic22dd54a48190b81d711625efb6b9f3078f41778 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11365 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-08-30Kconfig: Don't 'select' options based on PAYLOAD_SEABIOSAlexandru Gagniuc
This is just wrong. PAYLOAD_SEABIOS tells us nothing about whether or not the payload will actually be SeaBIOS: 1. PAYLOAD_SEABIOS, but payload changed with cbfstool 2. !PAYLOAD_SEABIOS, but an elf payload was added which is SeaBIOS et. cetera. Change-Id: I4c17e8dde20bf21537f542fda2dad7d3a1894862 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11293 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2015-06-10PCI subsystem: Drop PCI_64BIT_PREF_MEM optionKyösti Mälkki
No board in the tree selects this and it looks like the implementation was done at chipset level while it should be part of PCI subsystem. When enabled, at least AMD K8 and f14, f15tn and f16kb fail build test. Feature of placing prefetchable PCI memory above 4GB may not work if there is any 32-bit only prefetchable PCI BARs in the system. Change-Id: I40ded2c7d6d05f461423721aa5d78a78f9f9ce1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8705 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-03-23PCIe: Add L1 Sub-State support.Kenji Chen
Enable L1 Sub-State when both root port and endpoint support it. [pg: keyed the feature to MMCONF_SUPPORT, otherwise boards without that capability fail to build.] Change-Id: Id11fc7c73eb865411747eef63f5f901e00a17f84 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ac04ad7e2261846e40da297f7fa317ccebda092 Original-BUG=chrome-os-partner:31424 Original-TEST=Build a image and run on Samus proto boards to check if the settings are applied correctly. I just only have proto boards and need someone having EVT boards to confirm the settings. Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Original-Change-Id: Id1b5a52ff0b896f4531c4a6e68e70a2cea8c736a Original-Reviewed-on: https://chromium-review.googlesource.com/221436 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/8832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-09AMD fam10: Drop PCI_BUS_SEGN_BITSKyösti Mälkki
All boards in tree use 0. Looks like this is all work that was never completed and tested. We also have static setting sysconf.segbit=0 which would conflict with PCI_BUS_SEGN_BITS>0. Having PCI_BUS_SEGN_BITS>0 would also require PCI MMCONF support to cover over 255 buses. Change-Id: I060efc44d1560541473b01690c2e8192863c1eb5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8554 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-03-09device/pciexp: Add support for PCIe CLK power managementKane Chen
Set PCIe "Enable Clock Power Management", if endpoint supports it. BUG=chrome-os-partner:31424 BRANCH=none TEST=build and boot on rambi, check Enable Clock Power Management in link control register is set properly Change-Id: Ie54110d1ef42184cfcf47c9fe4d735960aebe47f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://chromium-review.googlesource.com/220742 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> [Edit commit message.] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8447 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-02-10PCI subsystem: Remove AGP bridge typeKyösti Mälkki
There is no auto-detection for AGP type and we have no hardware that selects this. Furthermore, we treat AGP bridges just like PCI bridges, there is no optimisation for higher bandwidth. Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8367 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05drivers/xgi/z9s: Port Linux framebuffer initialization to corebootTimothy Pearson
Add native XGI Z9s framebuffer support to coreboot XGI initialization code largely taken from Linux 3.18.5 TEST: Booted KFSN4-DRE with XGI Volari Z9s into SeaBIOS with SeaVGABIOS enabled. Text appeared correctly on screen and interaction with graphical comboot menu was successful. However, Linux cleared the framebuffer on boot, rendering the screen useless until Linux loaded its native xgifb driver. Change-Id: I606a3892849fc578b0c4d74536aec0a0adef3be3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8331 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-31Fix Kconfig whitespaceKyösti Mälkki
Change-Id: Iad64d018edda3064a77bfbcd41cfea5275a2e737 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-30i2c: Add software_i2c driver for I2C debugging and emulationJulius Werner
This patch adds I2C emulation in software through raw toggling of the SDA/SCL lines. Platforms need to provide bindings to toggle their respective I2C busses for this to work (e.g. by pinmuxing them as GPIOs, currently only enabled for Tegra). This is mostly useful as a debugging feature, to drive unusual states on a bus and closely monitor the device output without the need of a bus analyzer. It provides a few functions to "wedge" an I2C bus by aborting a transaction at certain points, which can be used to test if a system can correctly recover from an ill-timed reboot. However, it can also dynamically replace the existing I2C transfer functions and drive some/all I2C transfers on the system, which might be useful if a driver for the actual I2C controller hardware is not (yet) available. Based on original code by Doug Anderson <dianders@chromium.org> and Hung-ying Tyan <tyanh@chromium.org> for the ChromeOS embedded controller project. BRANCH=None BUG=chrome-os-partner:28323 TEST=Spread tegra_software_i2c_init()/tegra_software_i2c_disable() through the code and see that everything still works. Original-Change-Id: I9ee7ccbd1efb38206669a35d0c3318af16f8be63 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198791 Original-Reviewed-by: Doug Anderson <dianders@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8f71503dbbd74c5298e90e2163b67d4efe3e89db) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6c5f75bb5baaabd62b6b1fc26c2c71d9f1ce682 Reviewed-on: http://review.coreboot.org/7947 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-10-17Kconfig: clean up options in top level and device menuStefan Reinauer
Move generic options to the "General Setup" menu. Move device specific options to the "Devices" menu. Change-Id: I514a021305d43f026b24fd3016477300700ed401 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7089 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-07-23src/device/Kconfig: make help for VGA_BIOS_ID and PXE_ROM_ID more similarDaniele Forsi
Add to VGA_BIOS_ID the hint about lspci -nn and add to PXE_ROM_ID an empty line at the end for better readability in menuconfig. Change-Id: I56751c047c1ff08142e2af58ef3ba5fe1169eba5 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6301 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-23src/.../Kconfig: various small fixes to textsDaniele Forsi
Fixed spelling and added empty lines to separate the help from the text automatically added during make menuconfig. Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6313 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-19src/device/Kconfig: fix typo in label "1024x768 256-color"Daniele Forsi
It had an extraneous digit after 768. Change-Id: Ie415e365f3eac0ed326786cea4c4628c002c4762 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6306 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-05gizmosphere/gizmo: Move support of SPD data in CBFSKyösti Mälkki
This code is not specific to any board or AGESA family. Change-Id: I26c32fbe8e45018e239762b072dfe3da05271697 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5690 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01device: provide option to always load PCI option romsKyösti Mälkki
Certain kernel drivers require the presence of option rom contents because the board's static configuration information is located within the blob. Therefore, allow a chipset/board to instruct the pci device handling code to always load but not necessarily run the option rom. BUG=chrome-os-partner:25885 BRANCH=baytrail TEST=Both enabling and not enabling this option shows expected behavior. Change-Id: Ib0f65ffaf1a861b543573a062c291f4ba491ffe0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/188720 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5594 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-04-09OxPCIe uart: Split PCI bridge controlKyösti Mälkki
None of the PCI bridge management here is specific to the PCI UART device/function. Also the Kconfig variable defaults are not globally valid, fill samsung/lumpy with working values. Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5237 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03devices: Allow to configure textmode in native gfx init.Vladimir Serbinenko
Usefull to select between text mode which offers best compatibility with payloads and gfx mode which makes the best-looking screen. Also right now we have an unfortunate situation when qemu is in gfx mode while most real systems use text mode. Change-Id: Ifad7ba197875edfdd06eb932afeb5800229ef055 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5282 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-22device: Do not show "framebuffer graphics resolution" with native init.Vladimir Serbinenko
No native init uses this. Real hardware ones use mode specified in EDID. Qemu one uses CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_[XY]RES. Change-Id: I0845fec10b9811e2be44b5be30b9dc4f1c9719a6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5281 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-04device/Kconfig: Add third person singular s to lacksPaul Menzel
Change-Id: I74be0dbbf8d99f58ac28bfac281ccd27d1500078 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4608 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-24Remove PCI_ROM_RUN optionVladimir Serbinenko
The main purpose of option rom is to supply int* handlers. But supplying those is outside of coreboot scope and if someone needs those they should run SeaBIOS anyway which runs the option roms wonderfully. Running VGA oprom is kept because they're needed to init graphics. This patch still keeps the options to include the option roms to make them available to SeaBIOS. Change-Id: I646334cf88094d3bf8f527779a68a07e0b4b93ec Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4545 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
2013-12-21Add Kconfig options to override Subsystem Vendor and Device IDDuncan Laurie
These can typically be set in the devicetree but we need a way to override those values with a Kconfig setting so as not to expose the Vendor ID before the product has launched. Change-Id: Ib382e6d9359d24b128c693a657ffde52604efad3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/65310 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4455 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-13Add a generic Intel HD audio (Azalia) module azalia_device.cAndrew Wu
This module uses cim_verb_data to detect and initialize HD audio codecs. The module source code is based on southbridge/intel/sch/audio.c and southbridge/nvidia/mcp55/azalia.c. Change-Id: I810fef6fdcf55d66f62da58c3d7d99f006559d6e Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3844 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-04-03Add PXE ROM selection to Kconfig menuSiyuan Wang
Adding a pxe rom manually is inconvenient. With this patch, PXE ROM can be added automatically by selecting PXE_ROM in Kconfig. I have tested this patch on AMD Parmer and Thatcher with iPXE. iPXE would be a boot device in Seabios when pressing F12. iPXE works well with coreboot and Seabios. Change-Id: I2c4fc73fd9ae6c979f0af2290d410935f600e2c8 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-15Google Link: Add remaining code to support native graphicsRonald G. Minnich
The Link native graphics commit 49428d84 [1] Add support for Google's Chromebook Pixel was missing some of the higher level bits, and hence could not be used. This is not new code -- it has been working since last August -- so the effort now is to get it into the tree and structure it in a way compatible with upstream coreboot. 1. Add options to src/device/Kconfig to enable native graphics. 2. Export the MTRR function for setting variable MTRRs. 3. Clean up some of the comments and white space. While I realize that the product name is Pixel, the mainboard in the coreboot tree is called Link, and that name is what we will use in our commits. [1] http://review.coreboot.org/2482 Change-Id: Ie4db21f245cf5062fe3a8ee913d05dd79030e3e8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2531 Tested-by: build bot (Jenkins)
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-01-04Make PCIe config options depend on PCIe supportStefan Reinauer
Change-Id: I42452a044dc75e35876fcea1736481e538eed663 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2100 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>