| Age | Commit message (Collapse) | Author |
|---|
|
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the
architecture specific to that stage i.e. we will have CONFIG_ARCH variables for
each of the three stages. This allows us to have an SOC with any combination of
architectures and thus every stage can be made to run on a completely different
architecture independent of others. Thus, bootblock can have an x86 arch whereas
romstage and ramstage can have arm32 and arm64 arch respectively. These stage
specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain
and compiler flags for every stage.
These options can be considered as either arch or modes eg: x86 running in
different modes or ARM having different arch types (v4, v7, v8). We have got rid
of the original CONFIG_ARCH option completely as every stage can have any
architecture of its own. Thus, almost all the components of coreboot are
identified as being part of one of the three stages (bootblock, romstage or
ramstage). The components which cannot be classified as such e.g. smm, rmodules
can have their own compiler toolset which is for now set to *_i386. Hence, all
special classes are treated in a similar way and the compiler toolset is defined
using create_class_compiler defined in Makefile.
In order to meet these requirements, changes have been made to CC, LD, OBJCOPY
and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others.
Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the
toolsets are defined using create_class_compiler.
Few additional macros have been introduced to identify the class to be used at
various points, e.g.: CC_$(class) derives the $(class) part from the name of
the stage being compiled.
We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER
as they do not make any sense for coreboot as a whole. All these attributes are
associated with each of the stages.
Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5577
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
The mp_init library was based off of haswell code, but baytrail
was the first chipset to take advantage of it. Move haswell over
to using it so that the code duplication can be removed.
Change-Id: Id6e9464df028aa6ec138051f925817c85b4c13e5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5413
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
CONFIG_ARCH is a property of the cpu or soc rather than a property of the
board. Hence, move ARCH_* from every single board to respective cpu or soc
Kconfigs. Also update abuild to ignore ARCH_ from mainboards.
Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5570
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Correct selection of UART depends of board layout, not the CPU
internals, so default setting should originate from mainboard.
Change-Id: Ibf0ab0847ccce73c22704e86983dbe3d24ebc8a0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5618
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We have means to easily disable a specific console in romstage if
necessary, so this global option makes little sense.
The option was initially introduced as a work-around for build issues
around CACHE_AS_RAM, ROMCC and ARCH_ARMV7 dependencies for UARTs.
Change-Id: I797bdd11a48ddd813d3ee7ccef9a0c050f16f669
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5607
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
If platform has a component coreboot has to communicate with using
one of the UARTs, that device would not be part of the SoC and
must not use functions specific to a10 UART.
Change-Id: Ifacfc94dfde9979eae0b0cfb723a6eaa1fbcd659
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5469
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The port for console remains to be a compile time constant.
The Kconfig option is changed to select an UART port with index
to avoid putting map of UART base addresses in Kconfigs.
With this change it is possible to have other than debug console
on different UART port.
Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5342
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Option AMD_SB_SPI_LEN leaked to non-AMD configs.
Option SPI_FLASH is compulsory with HAVE_ACPI_RESUME.
Change-Id: Ib84c4d9e4fdf670b32b0cae7280fcbb6d3aecaf5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5606
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4683
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Rename coreboot_ram stage to ramstage. This is done in order to provide
consistency with other stage names (bootblock, romstage) and to allow any
Makefile rule generalization, required for patches to be submitted later.
Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
There is redundancy in terms of use of init_timer. We have a Kconfig option to
decide whether a board has init_timer as well as we use a stub for init_timer in
places where we do not have any init_timer defined. Thus, remove the Kconfig
option. Henceforth, all boards that do not have init_timer functionality can
include a stub_timer if required.
Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5569
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This was always AMD-only and it was never properly used with AGESA.
Change-Id: Ifb461ee845e442f6cf90aca52470cfb66e862bfc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5540
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Console is arch-agnostic and there is no need for separate
implementations for romstage and ramstage.
For SMM there is console only if DEBUG_SMI is selected.
Change-Id: I7028eeeff8bfbb9c8552972436b29a7508834d87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5338
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This is a small implementation which uses only MSRs and rdtsc, without
relying on northbridge or other system hardware. It's SMM safe in that
it only reads registers, and doesn't modify the state of the hardware.
Change-Id: Ifa02ca73455b382f830c9b30b80b4f1bb18706b4
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5501
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is the minimal setup needed to be able to execute SMI handlers.
Only support for ASEG handlers is added, which should be sufficient
for Trinity (up to 4 cores).
There are a few hacks which need to be introduced in generic code in
order to make this work properly, but these hacks are self-contained.
They are a not a result of any special needs of this CPU, but rather
from a poorly designed infrastructure. Comments are added to explain
how such code could be refactored in the future.
Change-Id: Iefd4ae17cf0206cae8848cadba3a12cbe3b2f8b6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5493
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Following the same reasoning as commit
ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
Change-Id: I8b78c462f4963fbb3a40d739196529fffedccb4c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5441
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Up until now, we were building AGESA by specifying each AGESA source
file and adding it to the list of romstage and ramstage source files.
As a result, we were compiling each AGESA source twice, despite the
fact that it does not depend on the stage we're in.
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
We still keep the practice of specifying every single AGESA directory
as an include dir and adding the AGESA CFLAGS to our global CFLAGS;
this is needed due to the way AGESA builds.
Change-Id: I9b23264129d1c08cb67cabc31d15a68d43ed7624
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5430
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Following the same reasoning as in commit
* 1d87dac hp/pavilion_m6_1035dx: Sanitize #includes
include AGESA files with a path relative to AGESA_ROOT. We cannot
with more than one generation of AGESA, hence the path being relative
to AGESA_ROOT.
Change-Id: If15c4cbfd42e0264264fdb3e8c426a47609ad41f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5426
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Otherwise we generate a recursive dependency because
CPU_AMD_AGESA depends on the per-family configurations
while those only exist if CPU_AMD_AGESA is selected.
Change-Id: Ic08d517ff4ca8bb76afc1574b55c54b28ec3f1b0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5490
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This gives us completely transparent low-level function to transmit
data.
Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5336
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Option DRIVERS_UART builds with support for UART hardware.
Option CONSOLE_SERIAL enables the console output for UART.
Those x86 boards that do not have serial port on SuperIO should select
NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration.
Removes:
CONSOLE_SERIAL_UART
HAVE_UART_IO_MAPPED
HAVE_UART_MEMORY_MAPPED
Renames:
CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO
CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM
Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5311
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Also fixes the reported baudrate to take get_option() into account.
Change-Id: Ieadad70b00df02a530b0ccb6fa4e1b51526089f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5310
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Prepare low-level register access to take UART base address as a
parameter. This is done to support a list of base addresses defined
in the platform.
Change-Id: Ie630e55f2562f099b0ba9eb94b08c92d26dfdf2e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5309
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I0b40c9811115b204f1cae70546d236049c1b3d30
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5431
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Clang does not like inline functions defined in C files with prototypes
in headers. Rather Clang expects inline function bodies to be in headers
if they are to be used out of scope. Since inline is purely advisory to
the compiler, drop its usage here.
Change-Id: I08a7a3d2cdf841ffbab10c017c75917768aac209
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5429
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
The timer_fsb variable was not correctly being accessed in the
presence of cache-as-ram. The cache-as-ram backing store could
be torn down but then udelay() could be called causing hangs from
accessing variables that have unknown values.
Instead change the timer_fsb variable to g_timer_fsb and obtain
the value through a local access method that does the correct things
to obtain the correct value.
Change-Id: Ia3e30808498cbe4a7f6f116c17a8cf1240a807a3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5411
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Use of CAR_GLOBAL is not safe after CAR is torn down, unless the
board properly implements EARLY_CBMEM_INIT.
Flag vulnerable boards that only do cbmem_recovery() in romstage on S3
resume and implementation with Intel FSP that invalidates cache before
we have a chance to copy the contents.
Change-Id: Iecd10dee9b73ab3f1f66826950fa0945675ff39f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This step needs to be done before calling any MMC functionality.
Change-Id: I88763072c8a541ddba794e79fb55e82eb2f187a9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4745
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Start using the rmodtool for generating rmodules.
rmodule_link() has been changed to create 2 rules:
one for the passed in <name>, the other for creating
<name>.rmod which is an ELF file in the format of
an rmodule.
Since the header is not compiled and linked together
with an rmodule there needs to be a way of marking
which symbol is the entry point. __rmodule_entry is
the symbol used for knowing the entry point. There
was a little churn in SMM modules to ensure an
rmodule entry point symbol takes a single argument.
Change-Id: Ie452ed866f6596bf13f137f5b832faa39f48d26e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5379
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If92b50ab3888518228d2d3b76f5c50c4aef968dd
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/4561
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Boot speeds can be sped up by mirroring the payload into
main memory before doing the actual loading. Systems that
would benefit from this are typically Intel ones whose SPI
are memory mapped. Without the SPI being cached all accesses
to the payload in SPI while being loaded result in uncacheable
accesses. Instead take advantage of the on-board SPI controller
which has an internal cache and prefetcher by copying 64-byte
cachelines using 32-bit word copies.
Change-Id: I4aac856b1b5130fa2d68a6c45a96cfeead472a52
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5305
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
UARTs now have unified prototypes and can use a single entry
in the list of drivers for ramstage.
Change-Id: I315daaf9a83cfa60f1a270146c729907a1d6d45b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5308
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Existing code compiled serial communication and printk() for SMM
even when DEBUG_SMI was not selected.
Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5142
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Change-Id: Ic65ffaaa092330ed68d891e4a09a8b86cdc04a3a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5236
Tested-by: build bot (Jenkins)
|
|
NOTE: UART base for SMM continues to be broken, as it does not use
the address resource allocator has assigned.
Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5235
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5234
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Do not pull in console hw-specific prototypes everywhere
with console.h as those are not needed for higher levels.
Move prototypes for UARTs next to other consoles.
Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5232
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
UART input clock is platform dependent. Also account for possible
use of get_option() where baudrate is not compile-time constant.
The hardware reference on BeagleBone is from a 48 MHz oscillator input.
With pre-divisor of 16 we get same register values as in table 19-25.
Change-Id: I89aee27c958f8618ce79a968ae7520a867e7e8a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5290
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
UART input clock is platform dependent. Also account for possible
use of get_option() where baudrate is not compile-time constant.
Change-Id: Ie1c8789ef72430e43fc33bfa9ffb9f5346762439
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5289
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Account for possible use of get_option() when baudrate is no longer
compile-time constant.
Change-Id: Ib45acd98e55c5892dbce9903830665aefeda5be0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5288
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This option is used to make uart8250mem option visible in menuconfig.
Showing it for these ARMs is incorrect.
Change-Id: I2c28e1c3781df41c09c365355a5105c9fe4945ed
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5259
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Do not guard the file by CONFIG_CONSOLE_SERIAL8250 or
CONFIG_CONSOLE_SERIAL8250MEM or CONFIG_CONSOLE_SERIAL.
Don't do indirect includes for <uart8250.h>.
The config-specific options are already properly guarded, and there
is no need to guard the register and bit definitions.
Change-Id: I7528b18cdc62bc5c22486f037e14002838a2176e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4585
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
With the recent improvement 3d6ffe76f8a505c2dff5d5c6146da3d63dad6e82,
speedup by CACHE_ROM is reduced a lot.
On the other hand this makes coreboot run out of MTRRs depending on
system configuration, hence screwing up I/O access and cache
coherency in worst cases.
CACHE_ROM requires the user to sanity check their boot output because
the feature is brittle. The working configuration is dependent on I/O
hole size, ram size, and chipset. Because of this the current
implementation can leave a system configured in an inconsistent state
leading to unexpected results such as poor performance and/or
inconsistent cache-coherency
Remove this as a buggy feature until we figure out how to do it properly
if necessary.
Change-Id: I858d78a907bf042fcc21fdf7a2bf899e9f6b591d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5146
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ic3c26fd7b1dd8a6731abc9a63b9ca17e084074b2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5291
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
There are some fun rules C compilers can use to optimize their code.
One of them is the assumption that two symbols point to two different
addresses.
In this case this wasn't true, resulting in unintended code execution
(and later, a crash) with a clang build.
Change-Id: I1496b22e1d1869ed0610e321b6ec6a83252e9d8b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/4719
Tested-by: build bot (Jenkins)
|
|
APIC IDs always step by 4 on 2065x independently of number of threads.
Change-Id: I5abd4005c8ce1740bb0862d952af66236b609aa8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5262
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Get the required UART includes directly.
The ne2k part is old copy-paste leftover.
Change-Id: Ifd9253abb5a50b515887459faf06b63f907eeda9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5258
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Its linker doesn't like "." arithmetics, so use .org,
while its assembler doesn't like data32 prefixes.
Change-Id: I3f5bbb350493d6510b8013df15d44c44c5db63c7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4714
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Haswell CPUs need to use the default SMM region for
relocating to the desired SMM location. Back up that
memory on resume instead of reserving the default
region. This makes the haswell support more forgiving
to software which expects PC-compatible memory layouts.
Change-Id: I9ae74f1f14fe07ba9a0027260d6e65faa6ea2aed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5217
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Certain CPUs require the default SMM region to be backed up
on resume after a suspend. The reason is that in order to
relocate the SMM region the default SMM region has to be used.
As coreboot is unaware of how that memory is used it needs to
be backed up. Therefore provide a common method for doing this.
Change-Id: I65fe1317dc0b2203cb29118564fdba995770ffea
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5216
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
There are 2 methods currently available in coreboot to load
ramstage from romstage: cbfs and vboot. The vboot path had
to be explicitly enabled and code needed to be added to
each chipset to support both. Additionally, many of the paths
were duplicated between the two. An additional complication
is the presence of having a relocatable ramstage which creates
another path with duplication.
To rectify this situation provide a common API through the
use of a callback to load the ramstage. The rest of the
existing logic to handle all the various cases is put in
a common place.
Change-Id: I5268ce70686cc0d121161a775c3a86ea38a4d8ae
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5087
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I857755976b17b0e492c086162f395a77933eeed8
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4698
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The files affected do not make any PCI configuration calls.
If they did, the more correct includes would be pci_ops.h,
pci_defs.h and pci_ids.h.
Change-Id: I3e7f009371be6ea50318eaabf0c15500cb3f1210
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5200
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
We should not have x86 specific includes in lib/.
Change-Id: I18fa9c8017d65c166ffd465038d71f35b30d6f3d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5156
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Be more conservative and only add VGA devices' prefetchable
resources as write-combining in the address space. Previously
all prefetchable memory was added as a write-combining memory
type. Some hardware incorrectly advertises its BAR as
prefetchable when it shouldn't be.
A new memranges_add_resources_filter() function is added
to provide additional filtering on device and resource.
Change-Id: I3fc55b90d8c5b694c5aa9e2f34db1b4ef845ce10
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5169
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The calculations for static allocation are no longer valid.
Change-Id: I6740cdcec789abddf78485a0edaf24882ef8c2a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4569
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I918ca1d0d0d7bcb7e16d41a12830a0357f15b8ed
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5130
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I2ecfd9733b65b6160bc2232d22db7b16692a847f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5149
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
If the MTRR usage exceeds the BIOS allocation for MTRR usage
re-try without the WRCOMB type.
Change-Id: Ie70ce84994428ff6700c36310264c3c44d9ed128
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5151
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The added CPU's are OSA248CEP5AU and a OSP280 processors.
The OSP280 VID/FID numbers have been found by experimentation
and extrapolation/guesses from similar models. It has been
verified to work fine under Linux (OpenSuse 12.2, kernel
3.4.63-2.44) with four different test-processors.
Windows is untested.
Change-Id: I3afa1cba5f55c8a78917b3636382af7706a80fee
Signed-off-by: Oskar Enoksson <enok@lysator.liu.se>
Reviewed-on: http://review.coreboot.org/5095
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
Found in some X201t.
Tested on X201t.
Change-Id: I3fc4c3f5b1abf9fe61746ab8f401d1b6ee67f3ea
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5090
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
In the past the turbo disable setting (bit 38) of the
IA32_MISC_ENABLES msr has been package scoped. That means
knocking the turbo disable bit down enabled turbo for the
entire package. Sadly, that's no longer true on all Intel
processors. Therefore, allow non-packaged scoped turbo
setting by introducing the CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED
Kconfig option. It defaults to false which was the original
assumption.
BUG=chrome-os-partner:25014
BRANCH=baytrail
TEST=Built and ran both ways successfully.
Change-Id: I71a31e76ff47878023081fc47da643187517b597
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182405
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5047
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
In order for the cpu code to start SMM relocation 2 new
functions are added to be shared:
- void smm_initiate_relocation_parallel()
- void smm_initiate_relocation()
The both initiate an SMI on the currently running cpu.
The 2 variants allow for parallel relocation or serialized
relocation.
BUG=chrome-os-partner:22862
BRANCH=None
TEST=Built and booted rambi using these functions.
Change-Id: I325777bac27e9a0efc3f54f7223c38310604c5a2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173982
Reviewed-on: http://review.coreboot.org/4891
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Provide a common entry point for bringing up the APs
in parallel. This work is based off of the Haswell one
which can be moved over to this in the future. The APs
are brought up and have the BSP's MTRRs duplicated in
their own MTRRs. Additionally, Microcode is loaded before
enabling caching. However, the current microcode loading
support assumes Intel's mechanism.
The infrastructure provides a notion of a flight plan
for the BSP and APs. This allows for flexibility in the
order of operations for a given architecture/chip without
providing any specific policy. Therefore, the chipset
caller can provide the order that is required.
BUG=chrome-os-partner:22862
BRANCH=None
TEST=Built and booted on rambi with baytrail specific patches.
Change-Id: I0539047a1b24c13ef278695737cdba3b9344c820
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173703
Reviewed-on: http://review.coreboot.org/4888
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Haswell was the original chipset to store the cache
in another area besides CBMEM. However, it was specific
to the implementation. Instead, provide a generic way
to obtain the location of the ramstage cache. This option
is selected using the CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM
Kconfig option.
BUG=chrome-os-partner:23249
BRANCH=None
TEST=Built and booted with baytrail support. Also built for
falco successfully.
Change-Id: I70d0940f7a8f73640c92a75fd22588c2c234241b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172602
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4876
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
In the case of CONFIG_VBOOT_VERIFY_FIRMWARE not being
selected allow for calling vboot_verify_firmware()
with an empty implementation. This allows for one not to
clutter the source with ifdefs.
BUG=chrome-os-partner:23249
BRANCH=None
TEST=Built with a !CONFIG_VBOOT_VERIFY_FIRMWARE and non-guarded
call to vboot_verify_firmware().
Change-Id: I72af717ede3c5d1db2a1f8e586fefcca82b191d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172711
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4879
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The access to control registers were scattered about.
Provide a single header file to provide the correct
access function and definitions.
BUG=chrome-os-partner:22991
BRANCH=None
TEST=Built and booted using this infrastructure. Also objdump'd the
assembly to ensure consistency (objdump -d -r -S | grep xmm).
Change-Id: Iff7a043e4e5ba930a6a77f968f1fcc14784214e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172641
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4873
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
When not building with CONFIG_SSE there are not enough
registers for ROMCC to use for spilling. The previous
changes to this file had too many local variables that
needed to be tracked -- thus causing romcc compilation
issues.
Change-Id: I3dd4b48be707f41ce273285e98ebd397c32a6a25
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4845
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ia4718ac31a5b2bd12f8cda5e107aa878d74d2a03
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4805
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Not used anymore since microcode was moved.
Change-Id: Id666c80cb20e90e3664c4dcfcc0c41a4aeb4864c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4788
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change to use cbmem_recovery() to wipe CBMEM region and reset
ACPI wakeup if CBMEM TOC was not found.
Change-Id: Ic362253eaa00bd442d4cc0514632f9096e20bfa6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4673
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change to use cbmem_recovery() to wipe CBMEM region and reset
ACPI wakeup if CBMEM TOC was not found.
Change-Id: I6648570d76b5c137f50addcc5bce9c126d179c65
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4672
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Now that CBFS microcode no longer requires a NULL termination, remove the
dummy terminators from all microcode blobs. This also enables microcode
blobs from different CPU models to be linked in the same
cpu_microcode_blob.bin without the terminators getting in the way.
Change-Id: I25a6454780fd5d56ae7660b0733ac4f8c4d90096
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4506
Tested-by: build bot (Jenkins)
|
|
The sequence to inject microcode updates is virtually the same for all
Intel CPUs. The same function is used to inject the update in both CBFS
and hardcoded cases, and in both of these cases, the microcode resides in
the ROM. This should be a safe change across the board.
The function which loaded compiled-in microcode is also removed here in
order to prevent it from being used in the future.
The dummy terminators from microcode need to be removed if this change is
to work when generating microcode from several microcode_blob.c files, as
is the case for older socketed CPUs. Removal of dummy terminators is done
in a subsequent patch.
Change-Id: I2cc8220cc4cd4a87aa7fc750e6c60ccdfa9986e9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4495
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
`Start_vid`
When adding support for PSS object generation for AMD pre Family Fh CPUs
(199c694f) the function `pstates_algorithm` was copied and adapted, but
`Start_vid` is not needed anymore as a static table is used. I’d remove
the variable, but Ron Minnich requested to leave it there for
documentation purposes. So just comment it out.
Change-Id: I3002951d168cade6461941c16d78373c47792e13
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/4036
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
CBFS could start from below 4MB, and should be cacheable for the
purpose of early microcode update and CBFS search for romstage file.
Change-Id: Ia2a1c6e5fdcc3201fafc8cf5c841cebbbf0b30c9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4626
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This change allows Kconfig options ROM_SIZE and CBFS_SIZE to be
set with values that are not power of 2. The region programmed
as WB cacheable will include all of ROM_SIZE.
Side-effects to consider:
Memory region below flash may be tagged WRPROT cacheable. As an
example, with ROM_SIZE of 12 MB, CACHE_ROM_SIZE would be 16 MB.
Since this can overlap CAR, we add an explicit test and fail
on compile should this happen. To work around this problem, one
needs to use CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig and
define a smaller region for WB cache.
With this change flash regions outside CBFS are also tagged WRPROT
cacheable. This covers IFD and ME and sections ChromeOS may use.
Change-Id: I5e577900ff7e91606bef6d80033caaed721ce4bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4625
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
This fixes a number of potential issues, such as generating a build
failure if the bootblock is too large, and making sure romstage and
ramstage cannot overlap in memory.
Change-Id: I4ca9ad097b145445316bcd962e007731b08a7fda
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4687
Tested-by: build bot (Jenkins)
|
|
Change-Id: I5a3bb3220aeefdd6822a7dbecf210ff77095dad6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4685
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Up until now, we relied on mksunxiboot to prepend the header which
makes coreboot.rom bootable on Allwinner SoCs. If that tool was not
present, the build silently failed.
Integrate this tool into our util/ package, so that we do not have to
rely on mksunxiboot being in PATH.
Our version of mksunxiboot also eliminates some limitations of the
original tool, so we no longer have to use 'dd' to limit the file
size.
Change-Id: Id5a4b1e2a3cb00cd1d6c70e6cbc3cfd8587e8a24
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4656
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Alphabetize the sources for each stage (bootblock, rom, ram), and
include twi.c in both romstage and ramstage.
Change-Id: I5526f5a66f6600560005731a3ee536eb858f4ff0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4639
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Number one reason to use cbfs_get_file was to get file length.
With previous patch no more need for this.
Change-Id: I330dda914d800c991757c5967b11963276ba9e00
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4674
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
IS_ENABLED() requires the full define (incl. CONFIG_ prefix)
but isn't needed here.
Change-Id: I91d504367c75ce3fcecc6fa2499afaa0896595d3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4646
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The memory initialization code is a work in progress for uboot, so we
only import the bits needed to get RAM up and running. Any refactoring
is cosmetic, and any functional refactoring should be done in separate
patches, and preferably, in coordination with the sunxi team.
Since it's not yet determined if we should initialize memory during
the bootblock or romstage, we don't add raminit to the build just yet.
Change-Id: I2ec1821942c6970150a02fa3806a257da649e1c9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4597
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
PLL5 is special in that it controls the DRAM clock, and requires a
fine-grained low-level control which will be needed by raminit code.
This change also brings functionality which will be needed by
raminit.
Change-Id: I25ecc91aa2154e504ceebb9003a5e5728d47f4a3
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4593
Tested-by: build bot (Jenkins)
|
|
Even though the Allwinner A10 is limited to a 24KiB bootblock, the
memory initialization takes only about 3KiB and leaves enough room for
an MMC or NAND driver, so init the memory early on. The advantage is
that we can eliminate complicated logistics of where to cache CBFS and
where to load the ramstage in SRAM.
Change-Id: Id549552ed509434e831db60deaef28e04d62417f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4630
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I9473a6e574c3af02d154a7e30245f0dc0b238300
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4599
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I2b857d3b4c01e39c62e54f753e400e6049f1dbc9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4598
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: Iafbd253235db3914b9382fdb41de2622ef83c6d8
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4596
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I4825f0d57696cd28751c59ae133b7e3315fb78e5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4595
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This bit is not documented in the datasheet, but is used in the
upcoming RAM init code.
Change-Id: I697ec222496236ac7690460ee62313ab8b1a2f0b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4592
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I11b10301199e5ff1a45d9b7d2958cc7b6667a29c
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4588
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rather than having to track which bit in which register should be
cleared or set to gate or ungate the clock to a certain peripheral,
provide a simplified enum which encodes the register and bit. This
change comes with a function which decodes the enum and gates/ungates
the clock.
This also removes the register-dependent bitmasks for APB0 and APB1
gating registers.
Change-Id: Ib3ca16e54eb37eadc3ceb88f4ccc497829ac34bc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4571
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Include a function to multiplex more than one pin at a time. This
is useful for peripherals that have the same function number for
all their pins.
Since we now have two functions for muxing pins, also document
them.
Change-Id: I53997cc3a2586e3cf749cd672f69fb427659c67f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4565
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We have 32KiB of usable SRAM right when we boot. The first 24KiB can
be loaded with our bootblock, while the other 8KiB can be used as
stack during the bootblock stage.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Change-Id: I48d3a37869031c3c1dbc1fab71204d473d64deeb
Reviewed-on: http://review.coreboot.org/4563
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add minimal support needed to get a bootblock capable of initialising
a serial console.
Change-Id: I50dd85544549baf9c5ea0aa3b4296972136c02a4
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4549
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I601efbff03d0f0f59557b33be8d6928ede310b62
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4558
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this
is not a true option but copy-paste remainder from AMD K8.
Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4581
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
K8_REV_F_SUPPORT is already set by all affected sockets, (AM2, F, S1G1).
Change-Id: If42a4178263d90a4e195fae0c78943ac9eda1ad6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4557
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: Ib3a69e3364418426438f88ba14e5cf744e2414fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4524
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
