summaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2013-02-01exynos5250: hard-code array index for memory timingsDavid Hendricks
Discovering memory timings is a bit complicated due to the need to obtain and decode board config. To make things worse, the imported code makes a mess of dependencies. Hard-code the memory timings for now to get us further along (the instability won't really matter until we're loading depthcharge anyway). Change-Id: I1f341ad597db0c31ed4ae6bc703fc22b6596a803 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2256 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-01exynos5250: #define the dram controller interleaving sizeDavid Hendricks
Change-Id: Iab184aa85be68b6ca5107d278d2fe821e5b2e611 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2255 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Exynos5250: Get DDR3 working by changing what is compiled and add a functionRonald G. Minnich
This is a minor set of changes to get DDR3 going. Move compilation of DDR3 startup to the romstage. Fix a prototype that was missing a void. Remove a function that is overly flexible, and even though it is overly flexible only actually can handle one type of RAM. Mainboards only support one type of DRAM, so create a function to explicitly initialize the type of DDR we have -- DDR3. With these changes, and the previous changes, google snow is ready to run the ramstage. Change-Id: I37e0ab0d2dbc1dd121fb175386a46bc2fb1285e5 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2224 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-30armv7: Add SPI driver for Exynos.Hung-Te Lin
The SPI flash driver for Exynos chipset. Verified to boot on snow/armv7. Change-Id: I7eef67a9c57f825d09f13ea44c2b59b54345fa7b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2229 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Extend CBFS to support arbitrary ROM source media.Hung-Te Lin
Summary: Isolate CBFS underlying I/O to board/arch-specific implementations as "media stream", to allow loading and booting romstage on non-x86. CBFS functions now all take a new "media source" parameter; use CBFS_DEFAULT_MEDIA if you simply want to load from main firmware. API Changes: cbfs_find => cbfs_get_file. cbfs_find_file => cbfs_get_file_content. cbfs_get_file => cbfs_get_file_content with correct type. CBFS used to work only on memory-mapped ROM (all x86). For platforms like ARM, the ROM may come from USB, UART, or SPI -- any serial devices and not available for memory mapping. To support these devices (and allowing CBFS to read from multiple source at the same time), CBFS operations are now virtual-ized into "cbfs_media". To simplify porting existing code, every media source must support both "reading into pre-allocated memory (read)" and "read and return an allocated buffer (map)". For devices without native memory-mapped ROM, "cbfs_simple_buffer*" provides simple memory mapping simulation. Every CBFS function now takes a cbfs_media* as parameter. CBFS_DEFAULT_MEDIA is defined for CBFS functions to automatically initialize a per-board default media (CBFS will internally calls init_default_cbfs_media). Also revised CBFS function names relying on memory mapped backend (ex, "cbfs_find" => actually loads files). Now we only have two getters: struct cbfs_file *entry = cbfs_get_file(media, name); void *data = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, name, type); Test results: - Verified to work on x86/qemu. - Compiles on ARM, and follow up commit will provide working SPI driver. Change-Id: Iac911ded25a6f2feffbf3101a81364625bb07746 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2182 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-29Exynos5250: change all unsigned with no type to 'unsigned int'Ronald G. Minnich
At some point we did a lot of cleanup to replace bare 'unsigned' with 'unsigned int'. Do that work for this imported code as well. At some point, we may find we can shrink these 'int's to something smaller, thought I very much doubt it's worth the trouble. Change-Id: Ic3da491c0188c56c836f8b9c4c8f26a31b4b3573 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2223 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-29Exynos5250: add debug prints to DDR3 startup code.Ronald G. Minnich
It can be handy to have debug prints as DRAM is started up, so that in the case of failure (does that ever happen?) you've got some idea where it failed. This patch adds some DEBUG_SPEW prints to the DDR3 code. I am doing this as its own CL because we may find we want to revert it. That's unlikely but it is not impossible if we skew the timing in some way. This code works for some trivial DRAM tests. Change-Id: I57e8d2a2d8df6b8ec8cd0d414681fc513e9999e3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-29Exynos5250: make vendor enums in the timing array more debuggable.Ronald G. Minnich
The timing array is crucial to proper operation of DRAM. Getting a valid pointer to it is hence very important. Unfortunately, the constants chosen for the vendor were '1', and '2', (this in a 32-bit word) which in a debug print makes it almost impossible to tell if you've got a misaligned pointer. Note: coreboot people did not choose them :-) So, give them values which are extremely unlikely to occur elsewhere in the array (or in memory, for that matter). Given the frequency with which this check occurs, i.e. once, I would much prefer strings but I expect I'd get shouted down on that one. Constants in this case are an almost useless optimization but we'll go with them for now. Note no space is saved by not using strings: there's an entire function somewhere devoted to mapping the enum to a string! Debug prints of pointers to structs in this array are now far more useful than they were. See snarky comment in the code (left there to make sure nobody gets tempted to get fancy again). Comment now less snarky. This is tested on google snow to the point that the DRAM works. Change-Id: I30bc44719f321f791fd82ded60e29393399d9e3d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2221 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-01-29armv7: Clean up the mmu setup a bitRonald G. Minnich
The previous incarnation did not use all of mmu_setup, which meant we did not carefully disable things before (possibly) changing them. This code is tested and works, and it's a bit of a simplification. Change-Id: I0560f9b8e25f31cd90e34304d6ec987fc5c87699 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2204 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-01-29armv7: nuke global_data.h and remove some references to gd structDavid Hendricks
This begins to remove references to global data which u-boot used. There are still many commented out references to gd-> and bd-> which we'll fix once we're happy with the replacements. Change-Id: Ie1b40a997e28a118f8f3ad96a2f9a2462d32fbe3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2210 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-25AGESA: Kconfig: Drop useless depends statementPatrick Georgi
`depends on FOO` in if FOO ... depends on FOO endif is useless. Introduced in commit 4b508341bcf11687be98d20f8178b5cc542a0842 Author: efdesign98 <efdesign98@gmail.com> Date: Wed Jul 13 17:16:13 2011 -0700 Add AMD Family 10 support to cpu folder and probably copied later on in the following commit. commit d3e990c6e5124f30b394f5dbd4902ea8bf341b07 Author: Kerry Sheh <shekairui@gmail.com> Date: Tue Feb 7 20:31:35 2012 +0800 AGESA F15: AGESA family15 model 00-0fh cpu wrapper Change-Id: I67cf231e3047a07cb6f0eeb5f77be368674a0603 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2186 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Hengelein <ilendir@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-19armv7/snow: get to romstageDavid Hendricks
This patch does a few things to get us into romstage: - Add romstage as a stage (a later patch adds it as a binary, which is probably wrong). The Makefile magic is complex enough that we let it build the XIP file for now, but we no longer use it. - Replace findstage with loadstage. Loadstage will find a stage, load the code to memory, and zero the remaining part of memory. Now we can link the romstage to go anywhere! - Eliminate magic offsets from code/ldscripts and centralize Kconfig variables in src/cpu/samsung/exynos5250/Kconfig. - Tidy up code and serial output Change-Id: Iae4d2f9e7f429cb1df15d49daf9a08b88d75d79d Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2174 Tested-by: build bot (Jenkins)
2013-01-18Snow bootblock (bloated/debug version)David Hendricks
This is the bloated Snow bootblock which includes: - SPI driver - UART, including requisite I2C, Maxim PMIC, and clock config code. - Adjustments for magic offsets (id section, stack pointer address) This is just a temporary solution until we have romstage loading. Once that happens, we'll rip out all but the code necessary for copying SPI ROM content into SRAM. Change-Id: I2a11e272eb9b6f626b5d9783eabb4a720a1d06be Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2170 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-17bootblock_cpu_init() stub for exynos5250David Hendricks
This adds a stub for bootblock_cpu_init() for exynos5250. It will eventually contain code to copy ROM content from SPI to SRAM. Change-Id: I26ee62a1e701013f38f76f200579faa680530860 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2138 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-17ARM bootblock approachDavid Hendricks
This lays out the groundwork for using a proper bootblock on ARM. Currently we bypass the bootblock entirely and go straight to romstage. However we want to utilize CBFS to maximize flexibility of placing code without relying on a lot of magic numbers which will break depending on the SoC in use. Change-Id: I9cc2a8191d2db38b27b6363ba673e5a360de9684 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2118 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-11exynos5250: Hacked up lowlevel_init_cDavid Hendricks
This is the first lowlevel init routine that gets called in romstage. It's fugly and needs a lot of clean-up, but does the job for now. Change-Id: Id54bf4f1c3753bcbed5f6b5eeb4b48bc3b41ce93 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2133 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-11exynos5250: Temporarily remove intermediate rule in MakefileDavid Hendricks
This cannot be used until we get the BL1 mess sorted out. Change-Id: I2490addb31256e27caa89ebb5b1501296e6903bd Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2132 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-11AMD: Set the mask of MTRR according to CONFIG_CPU_ADDR_BITSZheng Bao
The high bits of mtrr mask are MBZ (Must be zero). Writing 1 to these bits will cause exception. So be carefull when spread this change. The supermicro/h8scm needs more work. Currently it is set as it was. We need to check if the F10 and F15 have different value. Change-Id: I2dd8bf07ecee2fe4d1721cec6b21623556e68947 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1661 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-10armv7: update board_init_f function signatureDavid Hendricks
We don't pass arguments when we jump out of assembly code. Change-Id: Iccf3a6f713e260b08f9ff47e8b542b9e96369166 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2122 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10armv7: delete some unused filesDavid Hendricks
Change-Id: I4601b97cbd7dbfb6ee742b3920d2aac4ac49b958 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2121 Tested-by: build bot (Jenkins) Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2013-01-10exynos5250: clean-ups for clock_initDavid Hendricks
This does some clean-up for the exynos5250 clock_init.c: - No global data. - Remove some unused #includes - Hard-code the memory type for Elpida DRAM. This will need to be fixed eventually (or the system will be unstable), but is good enough for early bring-up and until we finish other re-factoring. Change-Id: Icd2cf8ba35058cbd1131666db311dfb77ef1a160 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2127 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10exynos5250: un-comment a lot of code which was left out earlierDavid Hendricks
Turns out initializing power rails is necessary, even for getting serial output. Change-Id: I3042c1001ae43b1e793ee6cb90bb79b8db0f8fd1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2126 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-05ARMv7: drop __ASSEMBLY__Stefan Reinauer
We moved to using __ASSEMBLER__ years ago since it is set by as. Change-Id: I60103ba23ebe87be1d0bc63beed0ef5b05eed4f2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2111 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-01-04cleanup some exynos5250 uart codeDavid Hendricks
This just cleans out some unused headers and tidies up the early serial code. TODO: Clean-up or replace FDT code, make "base_port" easier to configure. A bit of cleanup based on earlier patches. Change-Id: Ie77ee6d4935346e0053c09252055662f1a45d5f5 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2084 Tested-by: build bot (Jenkins)
2013-01-04make early serial console support more genericDavid Hendricks
This patch makes pre-RAM serial init more generic, particularly for platforms which do not necessarily need cache-as-RAM in order to use the serial console and do not have a standard 8250 serial port. This adds a Kconfig variable to set romstage-* for very early serial console init. The current method assumes that cache-as-RAM should enable this, so to maintain compatibility selecting CACHE_AS_RAM will also select EARLY_SERIAL_CONSOLE. The UART code structure needs some rework, but the use of ROMCC, romstage, and then ramstage makes things complex. uart.h now includes all .h files for all uarts. All 2 of them. This is actually a simplifying change. Change-Id: I089e7af633c227baf3c06c685f005e9d0e4b38ce Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2086 Tested-by: build bot (Jenkins)
2013-01-03snow: Stuff to support building image with BL1David Hendricks
This patch does two things which will take effect in follow-up patches: 1. Add an intermediate Makefile rule for dd'ing BL1 into the coreboot.rom pre-image. This is modeled after a similar hack for the bd82x6x southbridge. 2. Add a Kconfig variable, BOOTBLOCK_OFFSET, which will be used to pass the bootblock offset into cbfstool. Change-Id: I89da255dc903c387b754b06a11bb3439035ead87 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2093 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-03Add (hacked-up) s3c24x0_i2c filesDavid Hendricks
These are needed for communicating with the PMIC on Snow. We'll tidy them up as we go along... Change-Id: I197f59927eae0ad66191862d052de2a8873fb22f Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2078 Tested-by: build bot (Jenkins) Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2013-01-03import SPL files for board_i2c_{claim,release}_bus()David Hendricks
This imports SPL (second phase loader) files from U-Boot. Most of the content of these files will eventually go away since they're fairly U-Boot specific. For now they are here to make Jenkins happy. Change-Id: Ib3a365ecb9dc304b20f7c1c06665aad2c0c53e69 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2081 Tested-by: build bot (Jenkins) Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2012-12-29move iRAM config variable to exynos5250 KconfigDavid Hendricks
Since these don't seem very generic and depend on the BL1, let's move them to the CPU-specific Kconfig. Change-Id: I33059b7db30d35a1853918a580f312e50a3499fa Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2077 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-12Claim the SPI bus before writes if the IMC ROM is presentMartin Roth
The SB800 and Hudson now support adding the IMC ROM which runs from the same chip as coreboot. When the IMC is running, write or erase commands sent to the spi bus will fail, and the IMC will die. To fix this, we send a request to the IMC to stop fetching from the SPI rom while we write to it. This process (in one form or another) is required for writes to the SPI bus while the IMC is running. Because the IMC can take up to 500ms to respond every time we claim the bus, this patch tries to keep the number of times we need to do that to a minimum. We only need to claim the bus on writes, and using a counter for the semaphore allows us to call in once to claim the bus at the beginning of a number of transactions and it will stay claimed until we release it at the end of the transactions. Claim() - takes up to 500ms hit claim() - no delay erase() release() claim() - no delay write() release() Release() Change-Id: I4e003c5122a2ed47abce57ab8b92dee6aa4713ed Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1976 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-12-12Fix up Maxim MAX77686 driverStefan Reinauer
... to fit into the naming convention Change-Id: I4a7d81c4d6674d001fc831df863bd2343f6c636f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2020 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-12-11Remove un-needed i2c.h includeRonald G. Minnich
When we need i2c for this cpu we will use the coreboot smbus code. Change-Id: I4ba4cc9ae10e5ca830d621ee9c8d9f7bd2129e2f Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2019 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-12-11Correct the location of the include fileRonald G. Minnich
The max include file is in src/drivers/power. Change-Id: I2e663b472cade17fc50edbb449c0e54fd4a991eb Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2017 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-12-10Removed an unneeded include fileRonald G. Minnich
This file builds fine without including arch/types.h Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Change-Id: Icd38cf429576a2a1a33ebca84389526feddfc169 Reviewed-on: http://review.coreboot.org/2015 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-12-08WIP: Initial support for Samsung Exynos 5250 ARM CPUStefan Reinauer
Samsung SoC files, including Exynos5 (a Cortex-A15 implementation). Since this is an SoC we'll forego the x86-style {north,south}bridge and cpu distinction. We may try to split some stuff out before the final version if prudent. Change-Id: Ie068e9dc3dd836c83d90e282b10d5202e7a4ba9b Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2005 Tested-by: build bot (Jenkins)
2012-12-06Unify assembler function handlingStefan Reinauer
Instead of adding regparm(0) to each assembler function called by coreboot, add an asmlinkage macro (like the Linux kernel does) that can be different per architecture (and that is empty on ARM right now) Change-Id: I7ad10c463f6c552f1201f77ae24ed354ac48e2d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1973 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-01Add include files for samsung s5p-commonRonald G. Minnich
These are from u-boot but have been cleaned up somewhat to remove references to linux include files. Change-Id: I5fe3954a11d8c4aa792620ef5e1a5ee8932b8578 Signed-off-by: Hung-Ti Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1930 Tested-by: build bot (Jenkins)
2012-11-30AMD S3: Leverage the public SPI routineZheng Bao
Remove the old, unflexible code for storing S3 data in SPI flash. Refer to flashrom. Tested on Parmer. Change-Id: I60a10476befb4afab2b4241f01a988f4a8bb22cd Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1920 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-29Minor changes to .h files for samsung ARM partRonald G. Minnich
With these changes we have a mostly compiling target. I'm still removing and pruning .h files, but hopefully later today I'll do the last few .h commits and move on to .c Change-Id: Ia82d787496184e028f37d7b67336d61fda75aa94 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1937 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-11-28add .h files for common exynos 5Ronald G. Minnich
Change-Id: I48497adc29a1b8ca11d1e0a5d879cab5b6b55dcd Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1926 Tested-by: build bot (Jenkins)
2012-11-28Add .h files for samsung exynos 5250Ronald G. Minnich
Per a conversation with Stefan, these chip-dependent files are moved to the src tree, in the manner of other chips (north and southbridge). Change-Id: I12645ba05eb241eda200ed06cb633541a6a98119 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Reviewed-on: http://review.coreboot.org/1925 Tested-by: build bot (Jenkins)
2012-11-28amdk8/amdfam10: Use CAR_GLOBAL for sysinfoPatrick Georgi
This gets rid of the somewhat unstructured placement of AMD's sysinfo structure in CAR. We used to carve out some CAR space using a Kconfig variable, and then put sysinfo there manually (by "virtue" of pointer magic). Now it's a variable with the CAR_GLOBAL qualifier, and build system magic. For this, the following steps were done (but must happen together since the intermediates won't build): - Add new CAR_GLOBAL sysinfo_car - point all sysinfo pointers to sysinfo_car instead of GLOBAL_VAR - remove DCACHE_RAM_GLOBAL_VAR_SIZE - from CAR setup (no need to reserve the space) - commented out code (that was commented out for years) - only copy sizeof(sysinfo) into RAM after ram init, where before it copied the whole GLOBAL_VAR area. - from Kconfig Change-Id: I3cbcccd883ca6751326c8e32afde2eb0c91229ed Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1887 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-27Remove AMD special case for LAPIC based udelay()Patrick Georgi
- Optionally override FSB clock detection in generic LAPIC code with constant value. - Override on AMD Model fxx, 10xxx, agesa CPUs with 200MHz - compile LAPIC code for romstage, too - Remove #include ".../apic_timer.c" in AMD based mainboards - Remove custom udelay implementation from intel northbridges' romstages Future work: - remove the compile time special case (requires some cpuid based switching) - drop northbridge udelay implementations (i945, i5000) if not required anymore (eg. can SMM use the LAPIC timer?) Change-Id: I25bacaa2163f5e96ab7f3eaf1994ab6899eff054 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1618 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-27intel/i82801ix: new southbridge, ICH9Patrick Georgi
Add support for ICH9 southbridge Change-Id: I70612431101bf48d9dcc96ee1b37d257c9ad2ee2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1690 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-20Unify use of bool config variablesStefan Reinauer
e.g. -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS This will make it easier to switch over to use the config_enabled() macro later on. Change-Id: I0bcf223669318a7b1105534087c7675a74c1dd8a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1874 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-20secondary.S: Fix dropping ramstage.aStefan Reinauer
This unused code was not silently dropped as before. Change-Id: Ic76c58e233869a60c3a8a27c2efc2182b3a4442d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1863 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-20Make sure only one udelay function is availableStefan Reinauer
The Agesa wrapper and UDELAY_TIMER2 define their own timer functions, so don't shove in UDELAY_IO Change-Id: Ibe3345e825e0c074d5f531dba1198cd6e7b0a42d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1864 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Clean up KconfigStefan Reinauer
- move VGA handling options into devices/Kconfig - make Devices a top level menu - move some options "closer" to the code they control Change-Id: Ia79541d18b2b0d9b89a8b154255e312060627c48 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1840 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Add spinlock to serialize Intel microcode updatesStefan Reinauer
Updating microcode on several threads in a core at once can be harmful. Hence add a spinlock to make sure that does not happen. Change-Id: I0c9526b6194202ae7ab5c66361fe04ce137372cc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1778 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Clean up stack checking codeStefan Reinauer
Several small improvements of the stack checking code: - move the CPU0 stack check right before jumping to the payload and out of hardwaremain (that file is too crowded anyways) - fix prototype in lib.h - print size of used stack - use checkstack function both on CPU0 and CPU1-x - print amount of stack used per core Signed-off-by: Stefan Reinauer <reinauer@google.com> Test: Boot coreboot on Link, see the following output: ... CPU1: stack: 00156000 - 00157000, lowest used address 00156c68, stack used: 920 bytes CPU2: stack: 00155000 - 00156000, lowest used address 00155c68, stack used: 920 bytes CPU3: stack: 00154000 - 00155000, lowest used address 00154c68, stack used: 920 bytes ... Jumping to boot code at 1110008 CPU0: stack: 00157000 - 00158000, lowest used address 00157af8, stack used: 1288 bytes Change-Id: I7b83eeee0186559a0a62daa12e3f7782990fd2df Reviewed-on: http://review.coreboot.org/1787 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13clean up lapic_cpu_init.cStefan Reinauer
- drop changelog and add license header instead - 80+ character fixes - make stacks array static because it's not used externally - rename copy_secondary_start_to_1m_below() Change-Id: I8b461bea21ee0ddd85ea3a3a923d1e15167f54f0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1821 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Pass the CPU index as a parameter to startup.Ronald G. Minnich
This addition is in support of future multicore support in coreboot. It also will allow us to remove some asssembly code. The CPU "index" -- i.e., its order in the sequence in which cores are brought up, NOT its APIC id -- is passed into the secondary start. We modify the function to specify regparm(0). We also take this opportunity to do some cleanup: indexes become unsigned ints, not unsigned longs, for example. Build and boot on a multicore system, with pcserial enabled. Capture the output. Observe that the messages Initializing CPU #0 Initializing CPU #1 Initializing CPU #2 Initializing CPU #3 appear exactly as they do prior to this change. Change-Id: I5854d8d957c414f75fdd63fb017d2249330f955d Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1820 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-11-13Fix CONFIG_MAX_CPU set to 1 CPU build problemStefan Reinauer
There are some function dependancies that didn't work when MAX_CPU was set to 1 and the build would fail. Change-Id: I033a42056f7b48a40316e03772ed89ad9cb013fe Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1819 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-13Support better tracking of AP stack usage.Ronald G. Minnich
This change allows us to figure out how much of the AP stacks we are using, as well as to catch any case of an AP overrunning its stack. Also, the stack is poisoned, which is a good way to catch programming errors -- code should never count on auto variables being zerod. The stack bases are recorded in a new array, stacks. At the end, when all APs are initialized, the stacks are walked and the lowest level of the stack that is reached is printed. Build and boot and look for output like this: CPU1: stack allocated from 00148000 to 00148ff4:\ lowest stack address was 00148c4c CPU2: stack allocated from 00147000 to 00147ff4:\ lowest stack address was 00147c4c CPU3: stack allocated from 00146000 to 00146ff4:\ lowest stack address was 00146c4c Note that we used only about 1K of stack, even though in this case we allocated 4K (and in the main branch, we allocate 32K!) Change-Id: I99b7b9086848496feb3ecd207f64203fa69fadf5 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1818 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-12ivybridge: Catch unknown CPU revisionsStefan Reinauer
Adding an entry for 0x306a0 will make sure that all CPUs with CPUIDs 0x306aX will execute the driver (analog to Sandybridge behavior) Change-Id: I0353f3a48ecfd41274fdf6ee302c7d34482f1b5b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1783 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Fix gcc-4.7 building problem.Han Shen
Applied function attribute to function definition to avoid 'conflicting type' warning. Function declaration is in src/include/cpu.h void secondary_cpu_init(unsigned int cpu_index)__attribute__((regparm(0))); But function definition in lapic_cpu_init.c is missing the "__attribute__" part. Change-Id: Idb7cd00fda5a2d486893f9866920929c685d266e Signed-off-by: Han Shen <shenhan@google.com> Reviewed-on: http://review.coreboot.org/1784 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-12Initialize the VMX MSRMarc Jones
The VMX MSR may come up with random values and needs to be initialized to zero. This was done incorrectly in finalize_smm. It must be done on a per core basis in the general CPU init. This touches all Sandybridge and Ivybridge configs. Change-Id: I015352d0f8e2ebe55ac0a5e9c5bbff83bd2ff86b Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1794 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12Revert "Remove code that enables/disables VMX in coreboot on chromebooks."Marc Jones
The MSR for VMX can start with a random value and needs to be cleared by coreboot. I am reverting this change, as it handles almost everything and doing a follow-on change to fix the improper clearing of the MSR. Change-Id: Ibad7a27b03f199241c52c1ebdd2b6d4e81a18a4e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1793 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12sandybridge: Correct reporting of cores and threadsStefan Reinauer
The reporting of cores and threads in the system was a bit ambiguous. This patch makes it clearer. Change-Id: Ia05838a53f696fbaf78a1762fc6f4bf348d4ff0e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1786 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-07Leave power control registers unlockedSameer Nanda
To allow easy experimentation with thermals, leave power control registers unlocked. Change-Id: Ia53065f3f220c2faed58e7d53e60c3f169ae58ec Signed-off-by: Sameer Nanda <snanda@chromium.org> Reviewed-on: http://review.coreboot.org/1688 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-06cpu/intel/model_1067x: Add proper c-state/p-state/thermal supportNico Huber
Change-Id: I853454e8f5617fb7af5dddd7288bdeeacc7b1b8e Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06intel/socket_BGA956: enable speedstep, CAR, MMX, SSEPatrick Georgi
All of these capabilities exist on all CPUs supported on this socket. Change-Id: I54f34e48e34bb6ab5b9954ab7ece8c2c3a1a8e67 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1664 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05Overhaul speedstep codeNico Huber
This adds proper support for turbo and super-low-frequency modes. Calculation of the p-states has been rewritten and moved into an extra file speedstep.c so it can be used for non-acpi stuff like EMTTM table generation. It has been tested with a Core2Duo T9400 (Penryn) and a Core Duo T2300 (Yonah) processor. Change-Id: I5f7104fc921ba67d85794254f11d486b6688ecec Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1658 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05Fix some indentation flaws and break very long linesNico Huber
Change-Id: I3efef6bc8f519382ffdd92eb10b4bcd1a4361ba9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1657 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-02AMD agesa: add enable cache at the end of disable_cache_as_ramSiyuan Wang
add this code according to src/include/cpu/x86/cache.h ,line 92, functin enable_cache() Change-Id: Ida96a98397eeed98dd61ca979e8c5a33bf00f9e5 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1662 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-02Correct FSB reading in speedstep ACPINico Huber
We parsed the MSR the wrong way, and didn't support some valid values. Change-Id: Ia42e3de05dd76b6830aaa310ec82031d36def3a0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1656 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-01Merge cpu/intel/acpi.h into cpu/intel/speedstep.hNico Huber
We had only some MSR definitions in there, which are used in speedstep related code. I think speedstep.h is the better and less confusing place for these. Change-Id: I1eddea72c1e2d3b2f651468b08b3c6f88b713149 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1655 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-30Add support for socket LGA775Stefan Tauner
Change-Id: Ia7ef3a4cbc3638a9c9a48b297e392e4e655b6e6b Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1581 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-07Fix typo in mPGA603 socketKyösti Mälkki
Change-Id: I7a49d5fc13fb605a47c3c1662758ebd5935e7780 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1564 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-10-07Remove chip.h files without config structureKyösti Mälkki
Also deletes files not included in build: src/southbridge/amd/cimx/sb700/chip_name.c src/southbridge/amd/cimx/sb800/chip_name.c src/southbridge/amd/cimx/sb900/chip_name.c Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1473 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-19C32 legacy code: change CONFIG_CPU_AMD_SOCKET_C32 to ↵Siyuan Wang
CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA Currently the C32 has some legacy boards which use the old C32 code. We need to seperate them. CONFIG_CPU_AMD_SOCKET_C32 was used in legacy code before. But it is not a good idea, so we change the code as follows: So we use CONFIG_CPU_AMD_SOCKET_C32 to identify mainboard which uses agesa code, and use CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA to identify mainboard which uses legacy code. Change-Id: If6114bf8912e78b7732f25a1adfb2e4d8eb10ee4 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1497 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-05VIA Nano: Add support for VIA Nano CPUsAlexandru Gagniuc
Add code to do the following for the VIA Nano CPUs - Update microcode - Set maximum frequency - Initialize power states - Set up cache Attempting to change the voltage or frequency of the CPU without applying the microcode update will hang the CPU, so we only do transitions if we can verify the microcode has been updated. The microcode is updated directly from CBFS. No microcode is included in ramstage. The microcode is not included in this commit. To get the microcode, run bios_extract on the manufacturer supplied BIOS, and look for the file marked "P6 Microcode". Include this file in CBFS. You can have the build system include this file automatically by selecting Expert Mode, then look under 'Chipset' -> 'Include CPU microcode in CBFS' -> Include external microcode file (check) 'Path and filename of CPU microcode' should contain the location of the microcode file previously extracted. Change-Id: I586aaca5715e047b42ef901d66772ace0e6b655e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1257 Tested-by: build bot (Jenkins)
2012-09-05buildsystem: Make CPU microcode updating more configurableAlexandru Gagniuc
This patch aims to improve the microcode in CBFS handling that was brought by the last patches from Stefan and the Chromium team. Choices in Kconfig - 1) Generate microcode from tree (default) - 2) Include external microcode file - 3) Do not put microcode in CBFS The idea is to give the user full control over including non-free blobs in the final ROM image. MICROCODE_INCLUDE_PATH Kconfig variable is eliminated. Microcode is handled by a special class, cpu_microcode, as such: cpu_microcode-y += microcode_file.c MICROCODE_IN_CBFS should, in the future, be eliminated. Right now it is needed by intel microcode updating. Once all intel cpus are converted to cbfs updating, this variable can go away. These files are then compiled and assembled into a binary CBFS file. The advantage of doing it this way versus the current method is that 1) The rule is CPU-agnostic 2) Gives user more control over if and how to include microcode blobs 3) The rules for building the microcode binary are kept in src/cpu/Makefile.inc, and thus would not clobber the other makefiles, which are already overloaded and very difficult to navigate. Change-Id: I38d0c9851691aa112e93031860e94895857ebb76 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1245 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-08-27Intel model_106cx: change CAR to HT-capableKyösti Mälkki
There are hyper-threading Atom CPUs, those would not enable L2 cache with model_6ex CAR code. Switch to code that can handle different number of threads and cores. Change-Id: I57328c231f8998f45f7b0d26c63b24585f8476dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1384 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: James Laird <jhl@mafipulation.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-09Replicate TOP_MEM and TOP_MEM2 from BSP to AP CPUKyösti Mälkki
The search loop for UMA resource was only used to check for the highest RAM address below 4GB. The cached values from BSP CPU can now be used for the replication. Change-Id: I5244ffa6f8a93f5ff5aaf8a71bd006b0f9cd518a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1388 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-09AMD northbridge: copy TOP_MEM and TOP_MEM2 for distributionKyösti Mälkki
Take a copy of BSP CPU's TOP_MEM and TOP_MEM2 MSRs to be distributed to AP CPUs and factor out the debugging info from setup_uma_memory(). Change-Id: I1acb4eaa3fe118aee223df1ebff997289f5d3a56 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1387 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-09Synchronize rdtsc instructionsStefan Reinauer
The CPU can arbitrarily reorder calls to rdtsc, significantly reducing the precision of timing using the CPUs time stamp counter. Unfortunately the method of synchronizing rdtsc is different on AMD and Intel CPUs. There is a generic method, using the cpuid instruction, but that uses up a lot of registers, and is very slow. Hence, use the correct lfence/mfence instructions (for CPUs that we know support it) Change-Id: I17ecb48d283f38f23148c13159aceda704c64ea5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1422 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-07Move cpus_ready_for_init() to AMD K8Kyösti Mälkki
The function is a noop for all but amd/serengeti_cheetah. Change-Id: I09e2e710aa964c2f31e35fcea4f14856cc1e1dca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1184 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-05AMD S3: Remove the hardcoded volatile positionzbao
Change-Id: I4bcf3f3435f0ba487955d14ed1b010fd94b9f625 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1408 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-04Make the device tree available in the rom stageStefan Reinauer
We thought about two ways to do this change. The way we decided to try was to 1. drop all ops from devices in romstage 2. constify all devices in romstage (make them read-only) so we can compile static.c into romstage 3. the device tree "devices" can be used to read configuration from the device tree (and nothing else, really) 4. the device tree devices are accessed through struct device * in romstage only. device_t stays the typedef to int in romstage 5. Use the same static.c file in ramstage and romstage We declare structs as follows: ROMSTAGE_CONST struct bus dev_root_links[]; ROMSTAGE_CONST is const in romstage and empty in ramstage; This forces all of the device tree into the text area. So a struct looks like this: static ROMSTAGE_CONST struct device _dev21 = { #ifndef __PRE_RAM__ .ops = 0, #endif .bus = &_dev7_links[0], .path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}}, .enabled = 0, .on_mainboard = 1, .subsystem_vendor = 0x1ae0, .subsystem_device = 0xc000, .link_list = NULL, .sibling = &_dev22, #ifndef __PRE_RAM__ .chip_ops = &southbridge_intel_bd82x6x_ops, #endif .chip_info = &southbridge_intel_bd82x6x_info_10, .next=&_dev22 }; Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1398 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-03Intel CPUs: Fix counting of CPU coresKyösti Mälkki
Detection for a hyper-threading CPU was not compatible with multicore CPUs. When using CPUID eax==4, also need to set ecx=0. CAR init tested on real hardware with hyper-threading model_f25 and under qemu 0.15.1 with multicore CPU. Change-Id: I28ac8790f94652e4ba8ff88fe7812c812f967608 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1172 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-01Intel Sandybridge: add reserved memory as resourcesKyösti Mälkki
Reserved memory resources will get removed from memory table at the end of write_coreboot_table(), Change-Id: I02711b4be4f25054bd3361295d8d4dc996b2eb3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1372 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-31Revert "Use broadcast SIPI to startup siblings"Sven Schnelle
This reverts commit 042c1461fb777e583e5de48edf9326e47ee5595f. It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I7dd1cba5a4c1e4b0af366b20e8263b1f6f4b9714 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1381 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26CPU: Add option to set TCC activation offsetDuncan Laurie
The default TCC activation offset is 0, which means TCC activation starts at Tj_max. For devices with limited cooling ability it may be desired to lower TCC activation. This adds an option that can be declared in the devicetree to set the TCC activation to a non-zero value. Enable tcc_offset=15 in devicetree.cb and build/boot the BIOS and check that the value is set in the MSR: > and $(shr $(rdmsr 0 0x1a2) 24) 0xf 0xf Change-Id: I88f6857b40fd354f70fa9d5d9c1d8ceaea6dfcd1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1343 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26ACPI: Add a method to notify OS to re-read _PPCDuncan Laurie
Split this behavior out from PNOT() so the OS can update _PPC limit without re-reading C-state tables. Change-Id: I81b9111a4866f6b9916f74ac57a3caefaa77c565 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1342 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26ACPI: Add function to write _PPC using NVSDuncan Laurie
The existing NVS variable for PPCM will be used to select a dynamic max P-state. By itself this does not change existing behavior because the NVS PPCM variable is initialized to zero. PPCM can be tested by building and booting a modified BIOS that sets gnvs->ppcm to a value greater than 1 and checking from the OS that the P-state is limited to that value. Change-Id: Ia7b3bbc6b84c1aa42349bb236abee5cc92486561 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1341 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26USBDEBUG: buffer up to 8 bytesSven Schnelle
EHCI debug allows to send message with 8 bytes length, but we're only sending one byte in each transaction. Buffer up to 8 bytes to speed up debug output. Change-Id: I9dbb406833c4966c3afbd610e1b13a8fa3d62f39 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1357 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-07-26Drop CONFIG_CPU_MODEL_NAME and fix CPU name displayed in logsStefan Reinauer
On SandyBridge systems configured to work with Panther Point the CPU would wrongly be described as IvyBridge. Fix this issue and drop an unneeded Kconfig variable at the same time. Change-Id: I501a4fa00613e589cd315cfee61b2f9561dfcb4d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1335 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-26Enable Microcode in CBFS for all SandyBridge/IvyBridge systemsStefan Reinauer
Change-Id: Idee4facc18e0be60906d2a2f0e99bd39de8d7247 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1332 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25SMM: Fix state table for Intel Core2 CPUsStefan Reinauer
When fixing the SMM state table for SandyBridge/IvyBridge CPUs the wrong table was used for older 64bit capable CPUs. Change-Id: Ia7dff21aa3f0e5aa61575634fc839777de6bef10 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1353 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-25Fix comment to reference IvyBridge, tooStefan Reinauer
On both SandyBridge and IvyBridge BCLK is fixed at 100MHz. Have the comment reflect that. Change-Id: Ia81c3501dc3e68cf3143c3bc864dfbf88901f9f9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1336 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25Include SandyBridge Microcode when IvyBridge is enabledStefan Reinauer
.. in case the system has pluggable CPUs or might come in different SKUs. Change-Id: I7a7cd95b4de5dd78370355f448688e8d000434c1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1333 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25Fix date output in Microcode updateStefan Reinauer
Date and time are mixed up: microcode: updated to revision 0x12 date=2012-12-04 should be microcode: updated to revision 0x12 date=2012-04-12 Change-Id: I85f9100f31d88bb831bef07131f361c92c7ef34e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1334 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-07-25Fix LAPIC timer on Ivy Bridge systemsStefan Reinauer
The LAPIC timer is running at BCLK (100MHz) on Sandy Bridge and Ivy Bridge systems. However, the current timer code assumed that the clock would run at 200MHz instead. This made all delays twice as long as needed. Change-Id: I41b1186daee11cfd9a25b3a9d5ebdeeb271293c7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1330 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24CPU: Set flex ratio to nominal TDP ratio in bootblockDuncan Laurie
CPUs with configurable TDP will run the TSC at the max non-turbo ratio for the maximum TDP value, which can cause issues if another TDP is desired. To deal with this we set the flex ratio to the nominal TDP ratio early in the boot and then configure the Soft Reset Data registers so the PCH can tell the CPU what frequency to run at after a reset. This is done very early in the bootblock because it is necessary to reset the system after setting a flex ratio. The end result is that the TSC will now increment at the max non-turbo frequency for the nominal TDP. On some system with 1.8GHz CPU ensure that the kernel detects the CPU speed as ~1800mhz rather than ~2300mhz: > dmesg | grep "MHz processor" [ 0.004000] Detected 1795.801 MHz processor. Change-Id: I8436dced9199003b6423186a2b041e3f7b84ab8c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/1329 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24SMM: Fix state save map for sandybridge and TSEGDuncan Laurie
There are enough differences that it is worth defining the proper map for the sandybridge/ivybridge CPUs. The state save map was not being addressed properly for TSEG and needs to use the right offset instead of pointing in ASEG. To do this properly add a required southbridge export to return the TSEG base and use that where appropriate. Change-Id: Idad153ed6c07d2633cb3d53eddd433a3df490834 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1309 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>