| Age | Commit message (Collapse) | Author |
|---|
|
This patch provides an option to reload the microcode patch a.k.a
second microcode patch if SoC selects the required
RELOAD_MICROCODE_PATCH config.
There is a new feature requirement starting with ADL to re-load the
microcode patch as per new Mcheck initialization flow.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS. Able to re-load
microcode patch as below:
[INFO ] microcode: Re-load microcode patch
[INFO ] microcode: updated to revision 0x41b date=2022-03-08
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0a3c29b3c25fccd31280a2a5a8d4fb22a6cf53bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64833
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Use the common code to save data for fast boot or S3 resume.
An notable improvement that comes with this, is that the same 4K page
is not rewritten all the time. This prolongs the hardware's life.
TESTED on pcengines/apu1 and lenovo/g505s: S3 resume works fine.
Change-Id: I0f4f36dcead52a6c550fb5e606772e0a99029872
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44295
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Save the regular boot MTRRs that are restored on the S3 path during
the CPU init in cbmem instead of storing them to the SPI flash.
This was probably done because historically this code run with late
cbmem init (in ramstage).
TESTED on pcengines/apu1 and lenovo/g505s: S3 resume works fine.
Change-Id: Ia58e7cd1afb785ba0c379ba75ef6090b56cb9dc6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44294
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
We use a region later on so we might as well use a region from the
start. This simplifies the computations too.
Change-Id: Iffa36ccb89c36401d3856b24364216e83ca35f91
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64609
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This allows for some runtime checks on all SMM elements and removes
the need for manual checks.
We can drop completely separate codepaths on SMM_TSEG & SMM_ASEG as the
only difference is where permanent handler gets placed.
TESTED on prodrive/hermes and qemu with SSM_ASEG with 4 cores & SMM_TSEG
with 128 cores. This code figured out quite some problems with
overlapping regions so I think this is the right approach.
Change-Id: Ib7e2e3ae16c223ecfd8d5bce6ff6c17c53496925
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63602
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Some logging is superfluous and logging that code is being copied is
'SPEW' level.
Change-Id: I84d49a394cc53d78f1e1d3936502ac16810daf9f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When each AP needs to do a lot of printing 1 sec is not enough.
Change-Id: I00f0a49bf60f3915547924c34a62dd0044b0c918
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64828
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
|
|
Starting from Intel Pentium 4, cpus featured SSE2.
This will be used in the follow-up patches to determine whether to use
mfence as this instruction was introduced with the SSE2 feature set.
Change-Id: I8ce37d855cf84a9fb9fe9e18d77b0c19be261407
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Checking if the stack encroaches on the entry points is done in other
parts of the code.
Change-Id: I275d5dda9c69cc89608450ae27dd5dbd581e3595
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The Intel Firmware Interface Table (FIT) is a bit of an annoying outlier
among CBFS files because it gets manipulated by a separate utility
(ifittool) after cbfstool has already added it to the image. This will
break file hashes created for CBFS verification.
This is not actually a problem when booting, since coreboot never
actually loads the FIT from CBFS -- instead, it's only in the image for
use by platform-specific mechanisms that run before coreboot's
bootblock. But having an invalid file hash in the CBFS image is
confusing when you want to verify that the image is correctly built for
verification.
This patch adds a new CBFS file type "intel_fit" which is only used for
the intel_fit (and intel_fit_ts, if applicable) file containing the FIT.
cbfstool will avoid generating and verifying file hashes for this type,
like it already does for the "bootblock" and "cbfs header" types. (Note
that this means that any attempt to use the CBFS API to actually access
this file from coreboot will result in a verification error when CBFS
verification is enabled.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1c1bb6dab0c9ccc6e78529758a42ad3194cd130c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with SMI_DEBUG: SMM prints things on the console.
Change-Id: I7db55aaabd16a6ef585c4802218790bf04650b13
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This code is only meant to be used in early stages so move it back to
earlymtrr.c.
This reverts commit 3ad00d0c89c9e7a8e9ef13b6dc65bb338a191ec8.
Change-Id: I9bc1ac4b863eb43d3e398e6462ee139a7751bf62
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64804
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that mtrr_use_temp_range() can deal with multiple ranges there is no
need to expose this to restore the MTRR solution.
This reverts commit 00aaffaf470adfbaa0fbfa0ec3cc67311763810b.
Change-Id: Ib77a0f52228cd2f19f3227824f704ac690be4aba
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64803
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Temporary MTRR setup usually covers the memory mapped flash. On recent
Intel hardware the mapping is not coherent. It uses an external window
for parts of the BIOS region that exceed 16M.
This now allows up to 10 temporary memory ranges.
TESTED: Qemu with multiple MTRR temporary MTRR ranges sets up a valid
and optimized temporary MTRR solution.
Change-Id: I23442bd2ab7602e4c5cbd37d187a31413cf27ecc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
There is NULL dereference in adjust_apic_id_map() and updating
apic_id_to_cpu[] array within SMM stub fails.
Initial apic_id_to_cpu[] array may have worked for platforms
where APIC IDs are consecutive.
Change-Id: Ie59a731bfc883f8a47048b2ceacc66f44aa5b68c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Intel Meteor Lake SoC expects to select x2APIC for accessing LAPIC
hence, this patch provides an option where SoC code choose the correct
LAPIC access mode using choice selection.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I39c99ba13ad6e489c300bd0d4ef7274feeca9d4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Now that the save state size is handled properly inside the smm_loader
there is no reason to make that distinction in the mp_init code anymore.
Change-Id: Ia0002a33b6d0f792d8d78cf625fd7e830e3e50fc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This code was hard to read as it did too much and had a lot of state
to keep track of.
It also looks like the staggered entry points were first copied and
only later the parameters of the first stub were filled in. This
means that only the BSP stub is actually jumping to the permanent
smihandler. On the APs the stub would jump to wherever c_handler
happens to point to, which is likely 0. This effectively means that on
APs it's likely easy to have arbitrary code execution in SMM which is a
security problem.
Change-Id: I42ef9d6a30f3039f25e2cde975086a1365ca4182
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
We don't want to keep track of the real smm size all the time.
As a bonus now ss_start is now really the start of the save state
instead of top - MAX(stub_size, save state size).
Change-Id: I0981022e6c0df110d4a342ff06b1a3332911e2b7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This code is much easier to read if one does not have to keep track of
mutable variables.
This also fixes the alignment code on the TSEG smihandler setup code.
It was aligning the code upwards instead of downwards which would cause
it to encroach a part of the save state.
Change-Id: I310a232ced2ab15064bff99a39a26f745239f6b9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This is a duplicate of code_start.
Change-Id: I38e8905e3ed940fb34280c939d6f2f1fce8480a7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This code was very hard to read so rewrite it using as few mutable local
variables as possible.
Tested on qemu with 128 cores.
Change-Id: I7a455ba45a1c92533a8ecfd1aeecf34b4a63e409
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Currently no smihandler uses heap.
coreboot's heap manager also is quite limited in what it will
free (only the latest alloc). This makes it a bad idea to use it inside
the smihandler, as depending on the alloc usage the heap might actually
be full at some point, breaking the smihandler.
This also reduces the ramstage by 448 bytes on google/vilboz.
Change-Id: I70cd822be17c1efe13c94a9dbd2e1038808b9c56
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The postcar frame can now be a local variable to that function.
Change-Id: I873298970fff76b9ee1cae7da156613eb557ffbc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Setting up postcar MTRRs is done when invd is already called so there
is no reason to do this in assembly anymore.
This also drops the custom code for Quark to set up MTRRs.
TESTED on foxconn/g41m and hermes/prodrive that MTRR are properly set
in postcar & ramstage.
Change-Id: I5ec10e84118197a04de0a5194336ef8bb049bba4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54299
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MTRR is a core level register which means 2 threads in one core share
same MTRR. There is a race condition could happen that AP overrides
BSP MTRR unintentionally.
In order to prevent such race condition between BSP and APs, this
patch provides a function to let BSP assign tasks to all APs and wait
them to complete the assigned tasks.
BUG=b:225766934
Change-Id: I8d1d49bca410c821a3ad0347548afc42eb860594
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63566
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/pae.h>' -- src/) <(git grep -l 'memset_pae\|MEMSET_PAE_\|MAPPING_ERROR\|map_2M_page\|paging_identity_map_addr\|paging_enable_for_car\|paging_set_default_pat\|paging_set_pat\|PAT_ENCODE\|PAT_UC_MINUS\|PAT_WB\|PAT_WP\|PAT_WT\|PAT_WC\|PAT_UC\|paging_set_nxe\|paging_disable_pae\|paging_enable_pae\|paging_enable_pae_cr3' -- src/)
Change-Id: I4cab4b66c3d123dbb8a948a5596aa4975b31139b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Looks like the `set_power_limits()` declaration is copy-pasta leftovers
from `cpu/intel/model_206ax`. As it's unused, get rid of it.
Change-Id: I81704e883e52fea42488f52be116b6fcc2c6af4b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The lowest bound for L2 cache size on Socket P is 512 KiB.
This allows the use of cbfs mcache on all platforms.
This fixes building when some debug options are enabled.
Change-Id: I0d6f7f9151ecd4c9fbbba4ed033dfda8724b6772
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There is plenty of cache available to increase DCACHE_RAM_SIZE to
allow the use of cbfs mcache.
Tested on Gigabyte GA-D510UD, still boots and resumes.
Change-Id: I1487ba9decd3aa22424a3ac111de7fbdb867d38d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This removes the need for a tool to generate simple identity pages.
Future patches will link this page table directly into the stages on
some platforms so having an assembly file makes a lot of sense.
This also optimizes the size of the page of each 4K page by placing
the PDPE_table below the PDE.
Change-Id: Ia1e31b701a2584268c85d327bf139953213899e3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Follow-up patches will add more to this makefile.
Change-Id: I8da6265b4c810e39a67f5ec27e26eeb26e3679a4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
<arch/cpu.h> is chain included through <cpu/cpu.h>.
Change-Id: I54a837394f67ac2a759907c7212ab947d07338dc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <martinroth@google.com>
|
|
Found using:
diff <(git grep -l '#include <acpi/acpi.h>' -- src/) <(git grep -l 'SLP_EN\|SLP_TYP_SHIFT\|SLP_TYP\|SLP_TYP_S\|ACPI_TABLE_CREATOR\|OEM_ID\|ACPI_DSDT_REV_\|acpi_device_sleep_states\|ACPI_DEVICE_SLEEP\|RSDP_SIG\|ASLC\|ACPI_NAME_BUFFER_SIZE\|COREBOOT_ACPI_ID\|acpi_tables\|acpi_rsdp\|acpi_gen_regaddr\|ACPI_ADDRESS_SPACE\|ACPI_FFIXEDHW_\|ACPI_ACCESS_SIZE_\|ACPI_REG_MSR\|ACPI_REG_UNSUPPORTED\|ACPI_HID_\|acpi_table_header\|MAX_ACPI_TABLES\|acpi_rsdt\|acpi_xsdt\|acpi_hpet\|acpi_mcfg\|acpi_tcpa\|acpi_tpm2\|acpi_mcfg_mmconfig\|acpi_hmat\|acpi_hmat_mpda\|acpi_hmat_sllbi\|acpi_hmat_msci\|acpi_srat\|ACPI_SRAT_STRUCTURE_\|acpi_srat_lapic\|acpi_srat_mem\|acpi_srat_gia\|CPI_SRAT_GIA_DEV_HANDLE_\|acpi_slit\|acpi_madt\|acpi_lpit\|acpi_lpi_flags\|acpi_lpi_desc_type\|ACPI_LPI_DESC_TYPE_\|acpi_lpi_desc_hdr\|ACPI_LPIT_CTR_FREQ_TSC\|acpi_lpi_desc_ncst\|acpi_vfct_image_hdr\|acpi_vfct\|acpi_ivrs_info\|acpi_ivrs_ivhd\|acpi_ivrs\|acpi_crat_header\|ivhd11_iommu_attr\|acpi_ivrs_ivhd_11\|dev_scope_type\|SCOPE_PCI_\|SCOPE_IOAPIC\|SCOPE_MSI_HPET\|SCOPE_ACPI_NAMESPACE_DEVICE\|dev_scope\|dmar_type\|DMAR_\|DRHD_INCLUDE_PCI_ALL\|ATC_REQUIRED\|DMA_CTRL_PLATFORM_OPT_IN_FLAG\|dmar_entry\|dmar_rmrr_entry\|dmar_atsr_entry\|dmar_rhsa_entry\|dmar_andd_entry\|dmar_satc_entry\|acpi_dmar\|acpi_apic_types\|LOCAL_APIC,\|IO_APIC\|IRQ_SOURCE_OVERRIDE\|NMI_TYPE\|LOCAL_APIC_NMI\|LAPIC_ADDRESS_\|IO_SAPIC\|LOCAL_SAPIC\|PLATFORM_IRQ_SOURCES\|LOCAL_X2APIC\|GICC\|GICD\|GIC_MSI_FRAME\|GICR\|GIC_ITS\|acpi_madt_lapic\|acpi_madt_lapic_nmi\|ACPI_MADT_LAPIC_NMI_ALL_PROCESSORS\|acpi_madt_ioapic\|acpi_madt_irqoverride\|acpi_madt_lx2apic\|acpi_madt_lx2apic_nmi\|ACPI_DBG2_PORT_\|acpi_dbg2_header\|acpi_dbg2_device\|acpi_fadt\|ACPI_FADT_\|PM_UNSPECIFIED\|PM_DESKTOP\|PM_MOBILE\|PM_WORKSTATION\|PM_ENTERPRISE_SERVER\|PM_SOHO_SERVER\|PM_APPLIANCE_PC\|PM_PERFORMANCE_SERVER\|PM_TABLET\|acpi_facs\|ACPI_FACS_\|acpi_ecdt\|acpi_hest\|acpi_hest_esd\|acpi_hest_hen\|acpi_bert\|acpi_hest_generic_data\|acpi_hest_generic_data_v300\|HEST_GENERIC_ENTRY_V300\|ACPI_GENERROR_\|acpi_generic_error_status\|GENERIC_ERR_STS_\|acpi_cstate\|acpi_sw_pstate\|acpi_xpss_sw_pstate\|acpi_tstate\|acpi_lpi_state_flags\|ACPI_LPI_STATE_\|acpi_lpi_state\|acpi_upc_type\|UPC_TYPE_\|acpi_ipmi_interface_type\|IPMI_INTERFACE_\|ACPI_IPMI_\|acpi_spmi\|ACPI_EINJ_\|ACTION_COUNT\|BEGIN_INJECT_OP\|GET_TRIGGER_ACTION_TABLE\|SET_ERROR_TYPE\|GET_ERROR_TYPE\|END_INJECT_OP\|EXECUTE_INJECT_OP\|CHECK_BUSY_STATUS\|GET_CMD_STATUS\|SET_ERROR_TYPE_WITH_ADDRESS\|TRIGGER_ERROR\|READ_REGISTER\|READ_REGISTER_VALUE\|WRITE_REGISTER\|WRITE_REGISTER_VALUE\|NO_OP\|acpi_gen_regaddr1\|acpi_einj_action_table\|acpi_injection_header\|acpi_einj_trigger_table\|set_error_type\|EINJ_PARAM_NUM\|acpi_einj_smi\|EINJ_DEF_TRIGGER_PORT\|FLAG_PRESERVE\|FLAG_IGNORE\|EINJ_REG_MEMORY\|EINJ_REG_IO\|acpi_einj\|acpi_create_einj\|fw_cfg_acpi_tables\|preload_acpi_dsdt\|write_acpi_tables\|acpi_fill_madt\|acpi_fill_ivrs_ioapic\|acpi_create_ssdt_generator\|acpi_write_bert\|acpi_create_fadt\|acpi_fill_fadt\|arch_fill_fadt\|soc_fill_fadt\|mainboard_fill_fadt\|acpi_fill_gnvs\|acpi_fill_cnvs\|update_ssdt\|update_ssdtx\|acpi_fill_lpit\|acpi_checksum\|acpi_add_table\|acpi_create_madt_lapic\|acpi_create_madt_ioapic\|acpi_create_madt_irqoverride\|acpi_create_madt_lapic_nmi\|acpi_create_madt\|acpi_create_madt_lapics\|acpi_create_madt_lapic_nmis\|acpi_create_madt_lx2apic\|acpi_create_srat_lapic\|acpi_create_srat_mem\|acpi_create_srat_gia_pci\|acpi_create_mcfg_mmconfig\|acpi_create_srat_lapics\|acpi_create_srat\|acpi_create_slit\|acpi_create_hmat_mpda\|acpi_create_hmat\|acpi_create_vfct\|acpi_create_ipmi\|acpi_create_ivrs\|acpi_create_crat\|acpi_create_hpet\|acpi_write_hpet\|generate_cpu_entries\|acpi_create_mcfg\|acpi_create_facs\|acpi_create_dbg2\|acpi_write_dbg2_pci_uart\|acpi_create_dmar\|acpi_create_dmar_drhd\|acpi_create_dmar_rmrr\|acpi_create_dmar_atsr\|acpi_create_dmar_rhsa\|acpi_create_dmar_andd\|acpi_create_dmar_satc\|cpi_dmar_\|acpi_create_\|acpi_write_hest\|acpi_soc_get_bert_region\|acpi_resume\|mainboard_suspend_resume\|acpi_find_wakeup_vector\|ACPI_S\|acpi_sleep_from_pm1\|acpi_get_preferred_pm_profile\|acpi_get_sleep_type\|acpi_get_gpe\|permanent_smi_handler\|acpi_s3_resume_allowed\|acpi_is_wakeup_s3\|acpi_align_current\|get_acpi_table_revision' -- src/) |grep "<"
Change-Id: If0e3ca8dccf18c016f56208c4ee6fc08719a634b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <martinroth@google.com>
|
|
Change-Id: Ie9344da411a86186fa161e82db3c3fd3ffb911f6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I530bb217bb9a944990232dcf4e08f160b5267512
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55008
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
None of these options make sense on different ARCH.
Change-Id: Ie90ad24ff9013e38c42f10285cc3b546a3cc0571
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63673
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The printed address ranges in the tree (resource allocator and even
some MTRR code) usually shows the range inclusive (meaning from start
address to the real end address of the range). Though there is still
some code in the MTRR context which prints the ranges with an exclusive
end. This patch aligns the printing of ranges in the MTRR code to be
consistent among the tree so that the shown end addresses are now
inclusive.
Change-Id: I0ca292f9cf272564cb5ef1c4ea38f5c483605c94
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
This patch calls into need_restore_mtrr() from the mtrr_use_temp_range
function to set `put_back_original_solution` to discard any temporary
MTRR range prior to boot to payload.
BUG=b:225766934
TEST=Able to build and boot google/brya to verify that
`remove_temp_solution()` is able to discard any temporary MTRR range
before booting to payload.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2e00ec593847e1eb173d5ac77b15b50342860f89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
`put_back_original_solution` variable in mtrr.c is static, but there is
a need to set put_back_original_solution outside of mtrr.c in order to
let `remove_temp_solution` to drop any temporary MTRRs being set
outside `mtrr_use_temp_range()`, for example: `set_var_mtrr()` function
is used to set MTRRs for the ROM caching.
BUG=b:225766934
TEST=Able to build and boot google/redrix.
Change-Id: Ic6b5683b2aa7398a5e141f710394ab772e9775e7
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The sinkhole exploit exists in placing the lapic base such that it
messes with GDT. This can be mitigated by checking the lapic MSR
against the current program counter.
Change-Id: I49927c4f4218552b732bac8aae551d845ad7f079
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There is no reason to do this in a separate loop.
Change-Id: I7fe9f1004597602147aae72f4b754395b6b527cf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch delays removing `temporary` MTRR snapshots to avoid conflicts
with other operations attached with same `BS_PAYLOAD_BOOT/BS_ON_EXIT`
boot state.
BUG=b:225766934
TEST=Having variable MTRR snapshot using display_mtrrs() is able to
list only the permanent MTRRs and all temporary MTRRs are removed
prior to boot to payload.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I602dca989745159d013d6573191861b296f5d3ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch replaces the implementation that is used to get the number of
variable MTRRs with `get_var_mtrr_count()` function.
BUG=b:225766934
TEST=Able to build and boot google/redrix board to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4751add9c45374e60b7a425df87d06f52e6fcb8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch migrates a few useful MTRR functions as below from
`earlymtrr.c` file to newly created common stage file `mtrrlib.c`.
1. get_free_var_mtrr
2. set_var_mtrr
3. clear_all_var_mtrr
These functions can be used to perform the MTRR programming from IA
common code SPI driver as `fast_spi.c` without requiring two separate
implementations for early boot stage (till romstage) and for ramstage
onwards.
BUG=b:225766934
TEST=Able to build and boot google/redrix board to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2c62a04a36d3169545c3128b4231992ad9b3699d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
When rebuilding coreboot the empty fit table added to added to CBFS
stays the same so the build process sees no reason to update the file.
In the meantime ifittool did update that file for instance to add
microcode update entries. So each time coreboot is rebuilt the entries
are appended to the FIT table which runs out of space at some point.
One way to deal with this is to clear the fit table when setting the
pointer inside the bootblock.
TESTED: Now running 'make' again on prodrive/hermes does not report an
error with a filled FIT table.
Change-Id: Ia20a489dc90a4ae704e9ee6d532766899f83ffcc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63036
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change provides hooks for the SoC so it can perform any
initialization and cleanup in the SMM handler.
For example, if we have a UART enabled firmware with DEBUG_SMI, the UART
controller could have been powered off by the OS. In this case we need
to power on the UART when entering SMM, and then power it off before we
exit. If the OS had the UART enabled when entering SMM, we should
snapshot the UART register state, and restore it on exit. Otherwise we
risk clearing some interrupt enable bits.
BUG=b:221231786, b:217968734
TEST=Build test guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I946619cd62a974a98c575a92943b43ea639fc329
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This provides support to update energy performance preference value.
BUG=b:219785001
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: I381bca6c7746a4ae7ca32aa1b4992a6d53c8eaaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change will allow the SMI handler to write to the cbmem console
buffer. Normally SMIs can only be debugged using some kind of serial
port (UART). By storing the SMI logs into cbmem we can debug SMIs using
`cbmem -1`. Now that these logs are available to the OS we could also
verify there were no errors in the SMI handler.
Since SMM can write to all of DRAM, we can't trust any pointers
provided by cbmem after the OS has booted. For this reason we store the
cbmem console pointer as part of the SMM runtime parameters. The cbmem
console is implemented as a circular buffer so it will never write
outside of this area.
BUG=b:221231786
TEST=Boot non-serial FW with DEBUG_SMI and verified SMI messages are
visible when running `cbmem -1`. Perform a suspend/resume cycle and
verify new SMI events are written to the cbmem console log.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia1e310a12ca2f54210ccfaee58807cb808cfff79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch aims to make timestamps more consistent in naming,
to follow one pattern. Until now there were many naming patterns:
- TS_START_*/TS_END_*
- TS_BEFORE_*/TS_AFTER_*
- TS_*_START/TS_*_END
This change also aims to indicate, that these timestamps can be used
to create time-ranges, e.g. from TS_BOOTBLOCK_START to TS_BOOTBLOCK_END.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I533e32392224d9b67c37e6a67987b09bf1cf51c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will allow to migrate all platform to the parallel_mp init code
and drop the old lapic_init code.
Change-Id: If499e21a8dc7fca18bd5990f833170d0fc21e10c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58700
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I570f7de90007b67d811d158ca33e099d5cc2d5d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62308
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct some Quickpath initialisation steps according to findings from
two different Intel reference code binaries as well as MCHBAR register
dump comparisons between vendor firmware and coreboot.
The MSR_TURBO_POWER_CURRENT_LIMIT information comes from EDK2 sources.
Tested on Apple iMac 10,1 (Clarkdale, aka desktop Ironlake), QPI init
now completes successfully instead of causing hangs before raminit.
Also tested on HP ProBook 6550b (Arrandale, aka mobile Ironlake), still
reaches payload (e.g. TianoCore).
Change-Id: Icd0139aa588dc8d948c03132b5c86866d90f3231
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Fix regression after commit 9ec7227c9b
cpu/x86/lapic: Move LAPIC configuration to MP init
The call to disable_lapic() got removed and with asus/p2b
SeaBIOS payload was unable to load kernel.
The combination of entering SeaBIOS payload with an
enabled lapic but not having programmed LAPIC_LVT0
for DELIVERY_MODE_EXTINT apparently disconnects i8259
PIC interrupt delivery pin.
Change-Id: If51e5d65153a02ac7af191e7897c04bd4e298006
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: Ib555ce51294c94b22d9a7c0db84d38d7928f7015
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This reverts commit ceaf959678905f44a54a116f37bd15acab5d4608.
The AMD Picasso SoC doesn't support x2APIC and neither advertises the
presence of its support via bit 21 in EAX of CPUID leaf 1 nor has the
bit 10 in the APIC base address MSR 0x1b set, but it does have 0xd CPUID
leaves, so just checking for the presence of that CPUID leaf isn't
sufficient to be sure that EDX of the CPUID leaf 0xb will contain a
valid APIC ID.
In the case of Picasso EDX of the CPUID leaf 0xb returns 0 for all cores
which causes coreboot to get stuck somewhere at the end of MP init.
I'm not 100% sure if we should additionally check bit 21 in EAX of CPUID
function 1 is set instead of adding back the is_x2apic_mode check.
TEST=Mandolin with a Picasso SoC boots again.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If1e3c55ce2d048b14c08e06bb79810179a87993d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
A lot of soc code requires a definition of apm_control, which
smm/smi_trigger.c provided for !HAVE_SMI_HANDLER, but is not added as
a build target.
Fixes building Q35 without smihandler.
Change-Id: Ie57819b3d169311371a1caca83c9b0c796b46048
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This is just the amount of cpus so rename it for simplicity.
Change-Id: Ib2156136894eeda4a29e8e694480abe06da62959
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Both the relocation handler and the permanent handler use the same
stacks, so things can be simplified.
Change-Id: I7bdca775550e8280757a6c5a5150a0d638d5fc2d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Implementation for setup_lapic() did two things -- call
enable_lapic() and virtual_wire_mode_init().
In PARALLEL_MP case enable_lapic() was redundant as it
was already executed prior to initialize_cpu() call.
For the !PARALLEL_MP case enable_lapic() is added to
AP CPUs.
Change-Id: I5caf94315776a499e9cf8f007251b61f51292dc5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Leftover from using UDELAY_LAPIC on these platforms.
Change-Id: I718050925f3eb32448fd08e76d259f0fb082d2d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This avoids unnecessary passing of APIC ID parameter and
allows some minor optimisation for X2APIC mode.
Change-Id: I0b0c8c39ecd13858cffc91cc781bea52decf67c5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The options X2APIC_ONLY and X2APIC_RUNTIME were already user-visible
choices in menuconfig, but the functionality was not actually provided
except for platforms where FSP presumably enabled X2APIC.
Add the logic and related logging for switching to X2APIC operation.
TEST: qemu-system-x86_64 -M Q35 -accel kvm -bios coreboot.rom -serial
stdio -smp 2
PARALLEL_MP, and either X2APIC_ONLY or X2APIC_RUNTIME, need to be
selected for the build of emulation/qemu-q35.
Change-Id: I19a990ba287d21ccddaa64601923f1c4830e95e9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Even when we're not in X2APIC mode, the information in CPUID
leaf 0xb will be valid if that leaf is implemented on the CPU.
Change-Id: I0f1f46fe5091ebeab6dfb4c7e151150cf495d0cb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I85750282ab274f52bc176a1ac151ef2f9e0dd15d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Allow deciding whether to enable VMX through a function parameter. Used
in a follow-up.
Change-Id: I4f932de53207cd4e24cb4c67d20c60f708bfaa89
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
|
|
Followup will allow use of PARALLEL_MP with SMM_ASEG so
some guards need to be adjusted.
Change-Id: If032ce2be4749559db0d46ab5ae422afa7666785
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It was only evaluated on LEGACY_SMP_INIT path while model_106cx
has used PARALLEL_MP for a long time.
Change-Id: I90ce838f1041d55a7c77ca80e563e413ef3ff88d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SSE is already selected by SSE2 through model_{1067x,6fx}/Kconfig
Change-Id: I3641118905f1fcc1e34d7fe4f7ca3082c3cf0d3b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SSE is already slected by SSE2 through model_6{e,f}x/Kconfig
Change-Id: Ibe215cfe6aa6d7c215dd62e1ab2966d079c2a78d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SSE is already selected by SSE2 through model_1067x/Kconfig
Change-Id: I7b16af0277dc01c5905c5990244d3738a33723b3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SSE is already selected by SSE2 through model_106cx/Kconfig
Change-Id: I31b8345fdd901e1d05df5fa8351db3255f9cf9cb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I7fa1f9402b177a036f08bf99c98a6191c35fa0b5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
With very little changes this code can be used to initialize systems
without SMP. The linker will remove most of the code.
Change-Id: Ia0e8fdf8ed7bc2e0e4ff01be8d3e3c3cb837e6c7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move the SMM Kconfig options to the specific agesa cpu families.
Select NO_SMM for family14 since since no Fam14h platform uses SMM.
Leave SMM_ASEG enabled for family15tn and family16kb for now.
TEST=Boot Debian 11 on PC Engines apu1
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I09bbe036a88dada847219606ec79c68e7ca8e5cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Disable SMM_ASEG and select NO_SMM since the platforms do not use SMM.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I47237421c3dd5bd043447831263d72c9956cdaf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Disable LEGACY_SMP_INIT to enable PARALLEL_MP.
Also remove a large amount of APIC code that is now unnecessary.
TEST=Boot on PC Engines apu3
Boot time reduced from 1.707 seconds to 1.620 seconds average across
5 coldboots.
Inspired by CB:59693
Change-Id: Ib49e7d3f5956ac7831664d50db5f233b70aa54db
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
With CPU_INFO_V2 enabled %gs holds the pointer to the cpu_info struct,
so don't clobber it. Backup and restore %gs where possible.
Fixes a crash in MPinit seen after calling FSP-S.
Change-Id: If9fc999b34530de5d8b6ad27b9af25fc552e9420
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Fixes commit 29c7622 ("cpu/x86/mp_init.c: Fix building with no
smihandler") broke SMM init because is_smm_enable() was called before
smm_enable.
Rework the code a little to make it clear what codepaths are used with
CONFIG_HAVE_SMI_HANDLER.
TESTED: now prodrive/hermes boots again.
Change-Id: If4ce0dca2f29754d131dacf2da63e946be9a7b6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59912
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The build fails because smm_stub_size() tries to find a symbol that
won't be present.
Change-Id: I73fee3cf26c0e37cca03299c6730f7b4f1ef6685
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Tested on Qemu/i440fx. The follow-up commit adds a config file to
buildtest it.
Change-Id: Ieeaa85691e4c4516bb51df0e87c4ecaa940810f0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This will enable preloading the microcode. By preloading the
file, into cbfs_cache we reduce boot time.
BUG=b:179699789
TEST=Boot guybrush with CL chain and see microcode preloading and a
reduction of 1 ms.
| 112 - started reading uCode | 1.041 | 1.204 Δ( 0.16, 0.01%) |
| 113 - finished reading uCode | 1.365 | 0.011 Δ( -1.35, -0.10%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If0c634c692c97769e71acd1175fc464dc592c356
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage
the same logic (to skip 2nd SIPI and reduce delay between
INIT and SIPI while perform AP initialization) even on
newer Intel platform.
Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This file is using cpuid_result and cpuid(). I also removed the spinlock
header since it's not used. This is what was previously providing the
cpu.h header.
BUG=b:179699789
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idc3daa64562c4a4d57b678f13726509b480ba050
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Id95e45a3eba384a61c02016b7663ec71c3ae1865
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The comments are not correct anymore. With AGESA there is no need to
synchronize TOM_MEMx msr's between AP's. It's also not the best place
to do so anyway.
Change-Id: Iecbe1553035680b7c3780338070b852606d74d15
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I88f62c18b814ac0ddd356944359e727d6e3bba5a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
|
|
AGESA sets up MTRRs so these functions are now unused.
Change-Id: Ic2bb36d72944ac86c75c163e130f1eb762a7ca37
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
All supported AMD CPUs support getting the physical address size from cpuid so
there is no need for a Kconfig default value.
Change-Id: If6f9234e091f44a2a03012e7e14c380aefbe717e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Selecting CPU_X86_CACHE_HELPER only added the x86_enable_cache wrapper
function around enable_cache which additionally wrote a POST code to
port 0x80 and printed a message to the console. This function was only
called during multi-processor initialization in ramstage via the init
function pointer in the CPU's device operations struct and was run on
all cores, so the message on the console was printed once per CPU core.
This patch replaces all x86_enable_cache calls by calls to enable_cache
and removes the wrapper function and the Kconfig symbol
CPU_X86_CACHE_HELPER which was used to only add this when the
corresponding CPUs used the x86_enable_cache wrapper function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I5866b6bf014821ff9e3a48052a5eaf69319b003a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58579
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since all x86 CPUs in tree have MTRR support, there is no need to guard
the DISPLAY_MTRRS option with HAVE_DISPLAY_MTRRS. Also all x86 CPUs/SoCs
have a display_mtrrs call at least somewhere in their code, so selecting
the DISPLAY_MTRRS option will always have an effect. All SoCs that don't
select RESET_VECTOR_IN_RAM have the postcar stage where it gets called.
The two AMD SoCs that select RESET_VECTOR_IN_RAM use the FSP2 driver
which contains plenty of display_mtrrs calls.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2894689ce58e7404d9d5a894f3c288bc4016ea19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
All x86 CPUs in the coreboot tree have a local APIC, so the
corresponding code can be unconditionally included in the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc354fb386977b0fca4caa72c03aa77a20bc348e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
With using a Kconfig option to add the x86 LAPIC support code to the
build, there's no need for adding the corresponding directory to subdirs
in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added
(cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding
MTRR code selection patch and having verified that all platforms
added the MTRR code on that patch shows that soc/example/min86 and
soc/intel/quark are the only platforms that don't end up selecting the
LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y
which gets overridden to n in the Kconfig of the two SoCs mentioned
above.
Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The code for these CPU models isn't present in coreboot. These lines
have been commented-out since they where added, so drop them.
Change-Id: I8fc53fea4225217bc5bb70d839c280ebb64fd3a6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Move the selection of CPU_X86_CACHE_HELPER to the Kconfig file of the
CPU models which call the x86_enable_cache function that gets added to
the build by selecting this option.
Change-Id: Ie75682f5d20a79fc2f3aab9b8a2c3ccf79d1ad5c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
There's no need for relative paths with Kconfig options.
Change-Id: Ib9b9b29a158c34a30480aaabf6d0b23819d28427
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Some CPUs don't use the ramstage-only x86_enable_cache helper function
to call enable_cache with some added port 0x80 and console output.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: Ia44c7b150cd12d76e463903966f67d86750cbdd9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Since cpu/x86/Makefile.inc already adds the pae sub-directory, there is
no need to include it in the Makefile of a CPU or SoC, so remove it from
those Makefiles.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I78368f7eb880fb64f511a2fa8c8acde222d0dca3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
All x86-based CPUs and SoCs in the coreboot tree end up including the
Makefile in cpu/x86/mtrr, so include this directly in the Makefile in
cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new
x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is
selected be default could be added and the new CPU/SoC without MTRR
support can override this option that then will be used in the Makefile
to guard adding the Makefile from the cpu/x86/mtrr sub-directory.
In cpu/intel all models except model 2065X and 206AX are selcted by a
socket and rely on the socket's Makefile.inc to add x86/mtrr to the
subdirs, so those models don't add x86/mtrr themselves. The Intel
Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the
subdirs. The Intel Xeon SP SoC directory contains two sub-folders for
different versions or generations which both add x86/mtrr to the subdirs
in their Makefiles.
Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
