summaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2022-02-11cpu/x86/lapic: Fix SMP=n case with LEGACY_SMP_INITKyösti Mälkki
Fix regression after commit 9ec7227c9b cpu/x86/lapic: Move LAPIC configuration to MP init The call to disable_lapic() got removed and with asus/p2b SeaBIOS payload was unable to load kernel. The combination of entering SeaBIOS payload with an enabled lapic but not having programmed LAPIC_LVT0 for DELIVERY_MODE_EXTINT apparently disconnects i8259 PIC interrupt delivery pin. Change-Id: If51e5d65153a02ac7af191e7897c04bd4e298006 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-02-11src/cpu/power9: add file structure for power9, implement SCOM accessIgor Bagnucki
Change-Id: Ib555ce51294c94b22d9a7c0db84d38d7928f7015 Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com> Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2022-02-10Revert "cpu/x86/lapic: Unconditionally use CPUID leaf 0xb if available"Felix Held
This reverts commit ceaf959678905f44a54a116f37bd15acab5d4608. The AMD Picasso SoC doesn't support x2APIC and neither advertises the presence of its support via bit 21 in EAX of CPUID leaf 1 nor has the bit 10 in the APIC base address MSR 0x1b set, but it does have 0xd CPUID leaves, so just checking for the presence of that CPUID leaf isn't sufficient to be sure that EDX of the CPUID leaf 0xb will contain a valid APIC ID. In the case of Picasso EDX of the CPUID leaf 0xb returns 0 for all cores which causes coreboot to get stuck somewhere at the end of MP init. I'm not 100% sure if we should additionally check bit 21 in EAX of CPUID function 1 is set instead of adding back the is_x2apic_mode check. TEST=Mandolin with a Picasso SoC boots again. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If1e3c55ce2d048b14c08e06bb79810179a87993d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-02-07treewide: Remove "ERROR: "/"WARN: " prefixes from log messagesJulius Werner
Now that the console system itself will clearly differentiate loglevels, it is no longer necessary to explicitly add "ERROR: " in front of every BIOS_ERR message to help it stand out more (and allow automated tooling to grep for it). Removing all these extra .rodata characters should save us a nice little amount of binary size. This patch was created by running find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';' and doing some cursory review/cleanup on the result. Then doing the same thing for BIOS_WARN with 's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi' Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-02-07cpu/x86/Makefile.inc: Build smi_trigger on !HAVE_SMI_HANDLERArthur Heymans
A lot of soc code requires a definition of apm_control, which smm/smi_trigger.c provided for !HAVE_SMI_HANDLER, but is not added as a build target. Fixes building Q35 without smihandler. Change-Id: Ie57819b3d169311371a1caca83c9b0c796b46048 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-02-07cpu/x86/mp_init.c: Rename num_concurrent_stacksArthur Heymans
This is just the amount of cpus so rename it for simplicity. Change-Id: Ib2156136894eeda4a29e8e694480abe06da62959 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-07cpu/x86/smm: Improve smm stack setupArthur Heymans
Both the relocation handler and the permanent handler use the same stacks, so things can be simplified. Change-Id: I7bdca775550e8280757a6c5a5150a0d638d5fc2d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-05cpu/x86/lapic: Move LAPIC configuration to MP initKyösti Mälkki
Implementation for setup_lapic() did two things -- call enable_lapic() and virtual_wire_mode_init(). In PARALLEL_MP case enable_lapic() was redundant as it was already executed prior to initialize_cpu() call. For the !PARALLEL_MP case enable_lapic() is added to AP CPUs. Change-Id: I5caf94315776a499e9cf8f007251b61f51292dc5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-05cpu,nb/intel: Drop remains of LAPIC_MONOTONIC_TIMERKyösti Mälkki
Leftover from using UDELAY_LAPIC on these platforms. Change-Id: I718050925f3eb32448fd08e76d259f0fb082d2d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-05cpu/x86/lapic: Add lapic_send_ipi_self,others()Kyösti Mälkki
This avoids unnecessary passing of APIC ID parameter and allows some minor optimisation for X2APIC mode. Change-Id: I0b0c8c39ecd13858cffc91cc781bea52decf67c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-05cpu/x86/lapic: Support switching to X2APIC modeKyösti Mälkki
The options X2APIC_ONLY and X2APIC_RUNTIME were already user-visible choices in menuconfig, but the functionality was not actually provided except for platforms where FSP presumably enabled X2APIC. Add the logic and related logging for switching to X2APIC operation. TEST: qemu-system-x86_64 -M Q35 -accel kvm -bios coreboot.rom -serial stdio -smp 2 PARALLEL_MP, and either X2APIC_ONLY or X2APIC_RUNTIME, need to be selected for the build of emulation/qemu-q35. Change-Id: I19a990ba287d21ccddaa64601923f1c4830e95e9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2022-02-05cpu/x86/lapic: Unconditionally use CPUID leaf 0xb if availableKyösti Mälkki
Even when we're not in X2APIC mode, the information in CPUID leaf 0xb will be valid if that leaf is implemented on the CPU. Change-Id: I0f1f46fe5091ebeab6dfb4c7e151150cf495d0cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-03cpu/x86/smm: Retype variablesArthur Heymans
Change-Id: I85750282ab274f52bc176a1ac151ef2f9e0dd15d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-02-02cpu/intel/common: Add `set_feature_ctrl_vmx_arg()`Angel Pons
Allow deciding whether to enable VMX through a function parameter. Used in a follow-up. Change-Id: I4f932de53207cd4e24cb4c67d20c60f708bfaa89 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
2022-02-01cpu/x86/smm: Add SMM_LEGACY_ASEGKyösti Mälkki
Followup will allow use of PARALLEL_MP with SMM_ASEG so some guards need to be adjusted. Change-Id: If032ce2be4749559db0d46ab5ae422afa7666785 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-01cpu/x86/lapic: Drop SMM_SERIALIZED_INITIALIZATIONKyösti Mälkki
It was only evaluated on LEGACY_SMP_INIT path while model_106cx has used PARALLEL_MP for a long time. Change-Id: I90ce838f1041d55a7c77ca80e563e413ef3ff88d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27cpu/intel/socket_p: Drop 'select SSE'Elyes HAOUAS
SSE is already selected by SSE2 through model_{1067x,6fx}/Kconfig Change-Id: I3641118905f1fcc1e34d7fe4f7ca3082c3cf0d3b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27cpu/intel/socket_m: Drop 'select SSE'Elyes HAOUAS
SSE is already slected by SSE2 through model_6{e,f}x/Kconfig Change-Id: Ibe215cfe6aa6d7c215dd62e1ab2966d079c2a78d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27cpu/intel/socket_LGA775: Drop 'select SSE'Elyes HAOUAS
SSE is already selected by SSE2 through model_1067x/Kconfig Change-Id: I7b16af0277dc01c5905c5990244d3738a33723b3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27cpu/intel/socket_FCBGA559: Drop 'select SSE'Elyes HAOUAS
SSE is already selected by SSE2 through model_106cx/Kconfig Change-Id: I31b8345fdd901e1d05df5fa8351db3255f9cf9cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-26src: Add missing 'void' in function definitionElyes HAOUAS
Change-Id: I7fa1f9402b177a036f08bf99c98a6191c35fa0b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-10cpu/x86/mp_init.c: Make it work for !CONFIG_SMPArthur Heymans
With very little changes this code can be used to initialize systems without SMP. The linker will remove most of the code. Change-Id: Ia0e8fdf8ed7bc2e0e4ff01be8d3e3c3cb837e6c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-09cpu/amd/agesa/Kconfig: select NO_SMM for Family 14hMichał Kopeć
Move the SMM Kconfig options to the specific agesa cpu families. Select NO_SMM for family14 since since no Fam14h platform uses SMM. Leave SMM_ASEG enabled for family15tn and family16kb for now. TEST=Boot Debian 11 on PC Engines apu1 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I09bbe036a88dada847219606ec79c68e7ca8e5cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-12-08cpu/amd/pi/Kconfig: select NO_SMMMichał Kopeć
Disable SMM_ASEG and select NO_SMM since the platforms do not use SMM. TEST=Boot Debian 11 on PC Engines apu3 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I47237421c3dd5bd043447831263d72c9956cdaf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-06northbridge/amd/pi/00730F01: enable PARALLEL_MPMichał Kopeć
Disable LEGACY_SMP_INIT to enable PARALLEL_MP. Also remove a large amount of APIC code that is now unnecessary. TEST=Boot on PC Engines apu3 Boot time reduced from 1.707 seconds to 1.620 seconds average across 5 coldboots. Inspired by CB:59693 Change-Id: Ib49e7d3f5956ac7831664d50db5f233b70aa54db Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-06x86_64 assembly: Don't touch %gsPatrick Rudolph
With CPU_INFO_V2 enabled %gs holds the pointer to the cpu_info struct, so don't clobber it. Backup and restore %gs where possible. Fixes a crash in MPinit seen after calling FSP-S. Change-Id: If9fc999b34530de5d8b6ad27b9af25fc552e9420 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-06cpu/x86/mp_init.c: Fix HAVE_SMI_HANDLERArthur Heymans
Fixes commit 29c7622 ("cpu/x86/mp_init.c: Fix building with no smihandler") broke SMM init because is_smm_enable() was called before smm_enable. Rework the code a little to make it clear what codepaths are used with CONFIG_HAVE_SMI_HANDLER. TESTED: now prodrive/hermes boots again. Change-Id: If4ce0dca2f29754d131dacf2da63e946be9a7b6d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59912 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-03cpu/x86/mp_init.c: Fix building with no smihandlerArthur Heymans
The build fails because smm_stub_size() tries to find a symbol that won't be present. Change-Id: I73fee3cf26c0e37cca03299c6730f7b4f1ef6685 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-01cpu/x86/mp_init.c: Fix building without an SMI_HANDLERArthur Heymans
Tested on Qemu/i440fx. The follow-up commit adds a config file to buildtest it. Change-Id: Ieeaa85691e4c4516bb51df0e87c4ecaa940810f0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-29src/cpu,soc/amd/common/block/cpu: Add preload_microcodeRaul E Rangel
This will enable preloading the microcode. By preloading the file, into cbfs_cache we reduce boot time. BUG=b:179699789 TEST=Boot guybrush with CL chain and see microcode preloading and a reduction of 1 ms. | 112 - started reading uCode | 1.041 | 1.204 Δ( 0.16, 0.01%) | | 113 - finished reading uCode | 1.365 | 0.011 Δ( -1.35, -0.10%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If0c634c692c97769e71acd1175fc464dc592c356 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-29cpu/x86: Rename X86_AMD_INIT_SIPI to X86_INIT_NEED_1_SIPISubrata Banik
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage the same logic (to skip 2nd SIPI and reduce delay between INIT and SIPI while perform AP initialization) even on newer Intel platform. Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-22cpu/intel/hyperthreading: Add missing header <arch/cpu.h>Raul E Rangel
This file is using cpuid_result and cpuid(). I also removed the spinlock header since it's not used. This is what was previously providing the cpu.h header. BUG=b:179699789 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idc3daa64562c4a4d57b678f13726509b480ba050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-11-05cpu/intel: Use unsigned types in `get_cpu_count()`Angel Pons
Change-Id: Id95e45a3eba384a61c02016b7663ec71c3ae1865 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-03cpu/amd/mtrr: Remove topmem global variablesArthur Heymans
The comments are not correct anymore. With AGESA there is no need to synchronize TOM_MEMx msr's between AP's. It's also not the best place to do so anyway. Change-Id: Iecbe1553035680b7c3780338070b852606d74d15 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-03cpu/x86/Kconfig: Remove unused CPU_ADDR_BITSArthur Heymans
Change-Id: I88f62c18b814ac0ddd356944359e727d6e3bba5a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
2021-11-03cpu/amd/mtrr/amd_mtrr.c: Remove unused functionsArthur Heymans
AGESA sets up MTRRs so these functions are now unused. Change-Id: Ic2bb36d72944ac86c75c163e130f1eb762a7ca37 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-03cpu/amd: Always fetch CPU addr bits at runtimeArthur Heymans
All supported AMD CPUs support getting the physical address size from cpuid so there is no need for a Kconfig default value. Change-Id: If6f9234e091f44a2a03012e7e14c380aefbe717e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-26src/cpu: drop CPU_X86_CACHE_HELPER and x86_enable_cache wrapper functionFelix Held
Selecting CPU_X86_CACHE_HELPER only added the x86_enable_cache wrapper function around enable_cache which additionally wrote a POST code to port 0x80 and printed a message to the console. This function was only called during multi-processor initialization in ramstage via the init function pointer in the CPU's device operations struct and was run on all cores, so the message on the console was printed once per CPU core. This patch replaces all x86_enable_cache calls by calls to enable_cache and removes the wrapper function and the Kconfig symbol CPU_X86_CACHE_HELPER which was used to only add this when the corresponding CPUs used the x86_enable_cache wrapper function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I5866b6bf014821ff9e3a48052a5eaf69319b003a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58579 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-26cpu/x86/Kconfig.debug_cpu: drop HAVE_DISPLAY_MTRRS optionFelix Held
Since all x86 CPUs in tree have MTRR support, there is no need to guard the DISPLAY_MTRRS option with HAVE_DISPLAY_MTRRS. Also all x86 CPUs/SoCs have a display_mtrrs call at least somewhere in their code, so selecting the DISPLAY_MTRRS option will always have an effect. All SoCs that don't select RESET_VECTOR_IN_RAM have the postcar stage where it gets called. The two AMD SoCs that select RESET_VECTOR_IN_RAM use the FSP2 driver which contains plenty of display_mtrrs calls. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2894689ce58e7404d9d5a894f3c288bc4016ea19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: drop CPU_X86_LAPIC Kconfig optionFelix Held
All x86 CPUs in the coreboot tree have a local APIC, so the corresponding code can be unconditionally included in the build. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifc354fb386977b0fca4caa72c03aa77a20bc348e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/intel/socket_LGA775: Drop commented-out entriesFelix Held
The code for these CPU models isn't present in coreboot. These lines have been commented-out since they where added, so drop them. Change-Id: I8fc53fea4225217bc5bb70d839c280ebb64fd3a6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/intel/*/Kconfig: move selection of CPU_X86_CACHE_HELPERFelix Held
Move the selection of CPU_X86_CACHE_HELPER to the Kconfig file of the CPU models which call the x86_enable_cache function that gets added to the build by selecting this option. Change-Id: Ie75682f5d20a79fc2f3aab9b8a2c3ccf79d1ad5c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: Introduce `CPU_X86_CACHE_HELPER`Felix Held
There's no need for relative paths with Kconfig options. Change-Id: Ib9b9b29a158c34a30480aaabf6d0b23819d28427 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/amd,intel/*/Makefile: don't add cpu/x86/cacheFelix Held
Some CPUs don't use the ramstage-only x86_enable_cache helper function to call enable_cache with some added port 0x80 and console output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ia44c7b150cd12d76e463903966f67d86750cbdd9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-25cpu,soc/amd/*/Makefile: don't add cpu/x86/pae a second timeFelix Held
Since cpu/x86/Makefile.inc already adds the pae sub-directory, there is no need to include it in the Makefile of a CPU or SoC, so remove it from those Makefiles. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I78368f7eb880fb64f511a2fa8c8acde222d0dca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: use cb_err as status return type in remaining functionsFelix Held
Using cb_err as return type of mp_run_on_aps, mp_run_on_all_aps, mp_run_on_all_cpus and mp_park_aps clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of all 4 functions listed above against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4b3f03415a041d3ec9cd0e102980e53868b004b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21acpigen,soc/amd,cpu/intel: rework static DWORD for CPPC tableMichael Niewöhner
Some elements in the ACPI CPPC table allow static DWORDs. Instead of using a fake register resource, use a tagged union with the two types "register" and "DWORD" and respective macros for CPPC table entries. Test: dumped SSDT before and after do not differ. Change-Id: Ib853261b5c0ea87ae2424fed188f2d1872be9a06 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-21cpu/x86/mp_init: use cb_err as run_ap_work return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. To not change the return types of mp_run_on_aps which is exposed outside of this compilation unit to keep the scope of this patch limited, the return value of run_ap_work gets translated to the int values in mp_run_on_aps. This could also be done by a cast of the run_ap_work return value to int, but an explicit translation of the return values should be clearer about what it does there. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id346c8edf06229a929b4783498d8c6774f54a8b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init & bsp_do_flight_plan return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. To not change the return types of mp_init_with_smm which is exposed outside of this compilation unit to keep the scope of this patch limited, the return value of mp_init gets translated to the int values in mp_init_with_smm. This could also be done by a cast of the mp_init return value to int, but an explicit translation of the return values should be clearer about what it does there. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4129c1db06a877c47cca87782af965b62dcbbdc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as wait_for_aps return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Also restructure the implementation of wait_for_aps to not need a local timeout variable. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I86b8c8b0849ae130c78125b83d159147ce11914c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as apic_wait_timeout return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Also restructure the implementation of apic_wait_timeout to not need a local timeout variable. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2fe32c761492d252b154d2f50f2a330cf4f412d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as install_permanent_handler return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifb64b5908b938bb162153433e5f744ab0b95c525 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as install_relocation_handler return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I95f36ba628c7f3ce960a8f3bda730d1c720253cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86: Remove cpu parameter to ap_initRaul E Rangel
We now pre-populate cpu_info before jumping to the C handler. We no longer need this parameter. I moved the stack alignment closer to the actual invocation of the C handler so it's easier to reason about. BUG=b:194391185, b:179699789 TEST=Boot guybrush to OS and verify all CPUs still function Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8997683b6613b7031784cabf7039a400f0efdea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86: Require CPU_INFO_V2 when selecting PARALLEL_MPRaul E Rangel
This will reduce the number of AP init paths we need to support. BUG=b:194391185, b:179699789 TEST=Boot guybrush to OS and see all CPUs initialized correctly Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I05beb591bd7b3a26b6c51c10d4ffd6f8621c12eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21arch/x86,cpu/x86: Fix 64-bit CPU_INFO_V2 build errorsRaul E Rangel
There are two possible code sections where the cpu_info macros can be included: .code32 and .code64 Doing a `push %eax` while in a .code64 section will result in a compiler error. This macro manually pushes the 32-bit register onto the stack so we can share the code between 32 and 64 bit builds. We also can't implicitly dereference per_cpu_segment_selector because it's a 32-bit address. Trying to do this results in the following: E: Invalid reloc type: 11 E: Illegal use of 32bit sign extended addressing at offset 0x1b2 If we load the address first, then dereference it, we can work around the limitation. With these fixes, 64-bit builds can now use CPU_INFO_V2. BUG=b:179699789 TEST=Boot qemu 64 bit build with CPU_INFO_V2 and 4 CPUs. See AP init work as expected. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4e72a808c9583bb2d0f697cbbd9cb9c0aa0ea2dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-20cpu/x86/mp_init: rework start_aps to fix X86_AMD_INIT_SIPI caseFelix Held
When CONFIG_X86_AMD_INIT_SIPI was set, the second/final SIPI that afterwards checks if all APs have checked in was skipped and if it got so far, start_aps returned CB_SUCCESS despite not having checked if all APs had checked in after the SIPI. This patch makes start_aps skip the first SIPI in the CONFIG_X86_AMD_INIT_SIPI case so we use the proper timeouts and error handling for the final and this case only SIPI and signal the caller an error when not all APs have checked in after the SIPI. A timeless build for lenovo/x230 which is a mainboard that doesn't select X86_AMD_INIT_SIPI results in identical binary, so this doesn't change the behavior of the !X86_AMD_INIT_SIPI case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I39438229497c5d9c44dc7e247c7b2c81252b4bdb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-20cpu/x86/mp_init: use cb_err as start_aps return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icb96f28b4d59b3d00638a43c927df80f5d1643f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58455 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-20cpu/x86/mp_init: add final new line to debug messagesFelix Held
Since during AP startup it's not guaranteed that no AP console output will be printed between consecutive printk calls in send_sipi_to_aps, add a new line character to all printks to make sure to have the outputs from the APs on separate lines. For consistency also add a final new line character to the printk call in start_aps. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3983b8a0e6b272ba5fb2a90a108d17a0c480c8b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58454 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-20cpu/x86/mp_init: factor out send_sipi_to_aps functionFelix Held
Apart from the SIPI number in the debug message the two instances of the SIPI sending code in start_aps are identical, so factor it out into a new send_sipi_to_aps function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6a921b81fce77fbf58c7ae3b50efd8c3e6e5aef3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58453 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-20cpu/x86/mp_init: use types.h includeFelix Held
Using types.h as include instead of stddef.h and stdint.h will also provide commonlib/bsd/cb_err.h which will be used in follow-up patches. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I08a68dc827d60c6c9a27b3ec8b74b9c8a2c96d12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58452 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-19cpu/intel/speedstep: Constify `get_cst_entries()`Angel Pons
Make the `get_cst_entries()` function provide a read-only pointer. Also, constify the actual data where applicable. Change-Id: Ib22b3e37b086a95af770465a45222e9b84202e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-18cpu/x86/cpu_info.S: Remove ebx save/restoreRaul E Rangel
The push/pop of %ebx was only added because smm_stub saves the canary value in it. Now that we no longer use cpu_info in smm, we no longer need to save the register. BUG=b:179699789 TEST=Boot guybrush to the OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I554dbe016db8b1c61246c8ffc7fa252b2542ba92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-18cpu/x86/smm/smm_stub: Remove cpu_infoRaul E Rangel
Now that cpu_info() is no longer used by COOP_MULTITASKING, we no longer need to set up cpu_info in SMM. When using CPU_INFO_V2, if something does manage to call cpu_info() while executing in SMM mode, the %gs segment is disabled, so it will generate an exception. BUG=b:179699789 TEST=Boot guybrush to OS with threads enabled Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id64f32cc63082880a92dab6deb473431b2238cd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-18arch/x86,cpu/x86,lib/thread: Remove usage of cpu_info from lib/threadRaul E Rangel
We only ever start and execute threads on the BSP. By explicitly checking to see if the CPU is the BSP we can remove the dependency on cpu_info. With this change we can in theory enable threads in all stages. BUG=b:194391185, b:179699789 TEST=Boot guybrush to OS and verify coop multithreading still works Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iea4622d52c36d529e100b7ea55f32c334acfdf3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58199 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-18cpu/intel/hyperthreading: Use initial LAPIC IDsKyösti Mälkki
For older CPU models where CPUID leaf 0xb is not supported, use initial LAPIC ID from CPUID instead of LAPIC register space to to detect if logical CPU is a hyperthreading sibling. The one in LAPIC space is more complex to read, and might not reflect CPU topology as it can be modified in XAPIC mode. Change-Id: I8c458824db1ea66948126622a3e0d0604e391e4b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-10-18cpu/intel/hyperthreading: Use cpuid_get_max_func()Kyösti Mälkki
Change-Id: I4b69b1d20b5a768c269d85f0ea23f79e02391a71 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-10-18cpu/intel/hyperthreading: Use CPUID leaf 0xb without X2APICKyösti Mälkki
It is not a requirement to have X2APIC mode enabled to use CPUID leaf 0xb EDX to detect logical CPU is a hyperthreading sibling. Change-Id: I288f2df5a392c396f92bb6d18908df35de55915d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-10-18cpu/x86/lapic: Drop xapic_write_atomic()Kyösti Mälkki
Remove code, which was only needed for B and C2 stepping of P54C. The linux kernel source has commentary on X86_BUG_11AP: * See if we have a good local APIC by checking for buggy Pentia, * i.e. all B steppings and the C2 stepping of P54C when using their * integrated APIC (see 11AP erratum in "Pentium Processor * Specification Update") Change-Id: Iec10335f603674bcef2e7494831cf11200795d38 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-17cpu/x86/lapic: Only deliver ExtINT to BSPKyösti Mälkki
ExtINT is related to external PIC mode i8259 interrupts, they should be delivered to one CPU (BSP) only. Change-Id: I78490d2cbe3d9f52e10ef2471508263fd6c146ba Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-15cpu/intel/haswell: Lock PKG_CST_CONFIG_CONTROL MSRAngel Pons
Set PKG_CST_CONFIG_CONTROL MSR bit 15 to make bits 15:0 read-only. Change-Id: Ieb740aa94255cb3c23a56495c4b645d847637b7f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-15cpu/x86/lapic: Do not set read-only bits in LVTxKyösti Mälkki
The bits REMOTE_IRR and SEND_PENDING are documented as read-only, and reserved bits should not be modified either. Change-Id: I6bcb9eb990debe169340a0bfe662158b62a8f4dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-15cpu/x86/lapic: Add comment on spurious interruptKyösti Mälkki
The bit LAPIC_SPIV_ENABLE returns 0 after reset even though LAPIC has not been temporarily disabled. Change-Id: Id261bc68fe9d1b1b0e5a3ef599a8f33a686d283b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-15cpu/x86/lapic: Split virtual_wire_mode_init()Kyösti Mälkki
Only the enable_lapic() part is required while doing SMP init. Also disable_lapic() must not be called if we rely on LAPIC for timer source. Change-Id: Ib5e37c1a0a91fa4e9542141aa74f1c1876fee94e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-13soc/amd/cezanne,soc/intel/common: rework CPPC table generationMichael Niewöhner
Make use of the newly introduced ACPI macros for CPPC table generation that currently exists of a bunch of confusing assignments of structs that only get partially filled. Test: dumped SSDT before and after do not differ. Change-Id: I844d191b1134b98e409240ede71e2751e51e2159 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-05arch/x86,cpu/x86: Introduce new method for accessing cpu_infoRaul E Rangel
There is currently a fundamental flaw in the current cpu_info() implementation. It assumes that current stack is CONFIG_STACK_SIZE aligned. This assumption breaks down when performing SMM relocation. The first step in performing SMM relocation is changing the SMBASE. This is accomplished by installing the smmstub at 0x00038000, which is the default SMM entry point. The stub is configured to set up a new stack with the size of 1 KiB (CONFIG_SMM_STUB_STACK_SIZE), and an entry point of smm_do_relocation located in RAMSTAGE RAM. This means that when smm_do_relocation is executed, it is running in SMM with a different sized stack. When cpu_info() gets called it will be using CONFIG_STACK_SIZE to calculate the location of the cpu_info struct. This results in reading random memory. Since cpu_info() has to run in multiple environments, we can't use a compile time constant to locate the cpu_info struct. This CL introduces a new way of locating cpu_info. It uses a per-cpu segment descriptor that points to a per-cpu segment that is allocated on the stack. By using a segment descriptor to point to the per-cpu data, we no longer need to calculate the location of the cpu_info struct. This has the following advantages: * Stacks no longer need to be CONFIG_STACK_SIZE aligned. * Accessing an unconfigured segment will result in an exception. This ensures no one can call cpu_info() from an unsupported environment. * Segment selectors are cleared when entering SMM and restored when leaving SMM. * There is a 1:1 mapping between cpu and cpu_info. When using COOP_MULTITASKING, a new cpu_info is currently allocated at the top of each thread's stack. This no longer needs to happen. This CL guards most of the code with CONFIG(CPU_INFO_V2). I did this so reviewers can feel more comfortable knowing most of the CL is a no-op. I would eventually like to remove most of the guards though. This CL does not touch the LEGACY_SMP_INIT code path. I don't have any way of testing it. The %gs segment was chosen over the %fs segment because it's what the linux kernel uses for per-cpu data in x86_64 mode. BUG=b:194391185, b:179699789 TEST=Boot guybrush with CPU_INFO_V2 and verify BSP and APs have correct %gs segment. Verify cpu_info looks sane. Verify booting to the OS works correctly with COOP_MULTITASKING enabled. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I79dce9597cb784acb39a96897fb3c2f2973bfd98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-05src/acpi to src/lib: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5b8ecdfe75d99028fee820a2034466a8ad1c5e63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58080 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29arch/x86,cpu/x86: Disable the %gs and %fs segmentsRaul E Rangel
The %fs and %gs segment are typically used to implement thread local storage or cpu local storage. We don't currently use these in coreboot, so there is no reason to map them. By setting the segment index to 0, it disables the segment. If an instruction tries to read from one of these segments an exception will be raised. The end goal is to make cpu_info() use the %gs segment. This will remove the stack alignment requirements and fix smm_do_relocation. BUG=b:194391185, b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaa376e562acc6bd1dfffb7a23bdec82aa474c1d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-09-27arch/x86,cpu/x86: Move cpu_info initialization instructions into macroRaul E Rangel
This will help reduce duplication and make it easier to add new members to the cpu_info struct. BUG=b:194391185, b:179699789 TEST=Compare assembly of romstage and ramstage before and after Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I31f264f4bb8b605fa3cb3bfff0d9bf79224072aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/57859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-27cpu/x86/mp_init: add expansion for SIPI acronymFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic182d7c551932ab6917a81568490ed18acdcd597 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57927 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-24cpu/x86/mp_init: Add comment to smm_do_relocationRaul E Rangel
It took me a while to understand the SMM set up flow. This adds a clarifying comment. BUG=b:194391185, b:179699789 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9c73e416b8c583cf870e7a29b0bd7dcc99c2f5f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-09-17cpu: add missing arch/cpu.h includesFelix Held
Including arch/cpu.h is needed to have the declaration for cpuid_eax. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic22aba062117e3afa818fa2fc39cb0738e6a1612 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-08cpu/x86/tsc: Deduplicate Makefile logicAngel Pons
The code under `cpu/x86/tsc` is only compiled in when its `Makefile.inc` is included from platform (CPU/SoC) code and the `UDELAY_TSC` Kconfig option is enabled. Include `cpu/x86/tsc/Makefile.inc` once from `cpu/x86/Makefile.inc` and drop the now-redundant inclusions from platform code. Also, deduplicate the `UDELAY_TSC` guards. Change-Id: I41e96026f37f19de954fd5985b92a08cb97876c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57456 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-04cpu/x86: Use MP_RUN_ON_ALL_CPUS macro instead of hardcodingSubrata Banik
This patch ensures mp_run_on_all_aps() is passing 'MP_RUN_ON_ALL_CPUS' macro rather hardcoding `0` while running `func` on all APs. Change-Id: Icd34371c0d4349e1eefe945958eda957c4794707 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-22AGESA f15tn: Hook up IDS options to KconfigAngel Pons
IDS (Integrated Debug Services) options are meant to be enabled when one wants to debug AGESA. Since they are compile-time options, using Kconfig is the logical choice. Currently, none of the options builds. Tested with BUILD_TIMELESS=1 without adding the configuration options into the binary, and Asus A88XM-E does not change. Change-Id: I465627c19c9856e58ca94aa0efedbddb6baaf3f6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2021-07-27cpu/x86/mp_init: don't wait between INIT and SIPI for X86_AMD_INIT_SIPIFelix Held
Since current AMD SoCs don't need some wait time between INIT and SIPI, we can skip the 10ms wait there, which improves the boot time a bit. before: CPU_CLUSTER: 0 init finished in 632 msecs after: CPU_CLUSTER: 0 init finished in 619 msecs mpinit still works on Mandolin and all CPU cores show up and are usable. This also doesn't change the binary in a timeless build for boards/SoCs that don't select X86_AMD_INIT_SIPI which I verified for lenovo/x230. BUG=b:193885336 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1e044776f45021742a88a5e369a74383c1baaab6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-07-26arch/x86,cpu/x86/mp_init: Switch cpu_info index type to size_tRaul E Rangel
The alignment for `struct cpu_info` is wrong on x86_64. c_start.S uses the `push` instruction when setting up the cpu_info struct. This instruction will push 8 bytes but `unsigned int` is 4 bytes. By making it a `size_t` we get the correct size for both x86_32 and x86_64. BUG=b:179699789 TEST=Boot guybrush to the OS Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8ef311aaa8333ccf8a5b3f1f0e852bb26777671c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-16include/cpu/amd/msr: don't redefine the IA32_BIOS_SIGN_ID MSRFelix Held
Change-Id: Iff19ae495fb9c0795dae4b2844dc8e0220a57b2c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-07-14src: use mca_clear_status function instead of open codingFelix Held
Change-Id: I53413b4051b79d7c2f24b1191ce877155e654400 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56259 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14cpu/intel/*/*_init: use mca_get_bank_count()Felix Held
Use the common mca_get_bank_count function instead of open-coding the functionality to get the MCA bank number. Also re-type the num_banks variable from signed in to unsigned int, since the number of MCA bank is always positive, and make it constant. In the case of Intel model 2065x the mca_get_bank_count() call replaces a magic number. Change-Id: I245b15f57e77edca179e9e28965383a227617174 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56244 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14include/cpu/x86/msr: introduce IA32_MC_*(x) macrosFelix Held
When accessing the MCA MSRs, the MCA bank number gets multiplied by 4 and added to the IA32_MC0_* define to get the MSR number. Add a macro that already does this calculation to avoid open coding this repeatedly. Change-Id: I2de753b8c8ac8dcff5a94d5bba43aa13bbf94b99 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56243 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-12cpu/amd/*/model_*_init: use mca_get_bank_count()Felix Held
Use the common mca_get_bank_count function instead of open-coding the functionality to get the MCA bank number. Also re-type the num_banks variable from signed in to unsigned int, since the number of MCA bank is always positive. Change-Id: I70ad423aab484cf4ec8f51b43624cd434647aad4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-07-09soc/intel: Fix microcode loadingTim Wawrzynczak
Commit 1aa60a95bd8363d2 broke microcode loading for chipsets that have a microcode blob with a total_size field set to 0. This appears to be support for older chipsets, where the size was set to 0 and assumed to be 2048 bytes. The fix is to change the result of the subtraction to a signed type, and ensure the following comparison is done without promoting the signed type to an unsigned one. Resolves: https://ticket.coreboot.org/issues/313 Change-Id: I62def8014fd3f3bbf607b4d58ddc4dca4c695622 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56153 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Stefan Ott <coreboot@desire.ch> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-07Makefile.inc: Fix IFITTOOL dependenciesArthur Heymans
Add IFITTOOL as a dependency where needed and remove where it is unneeded. Change-Id: I88c9fc19cca0c72e80d3218dbcc76b89b04feacf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-07-07cpu/intel/car/core2/cache_as_ram: Add x86_64 supportPatrick Rudolph
Tested on Lenovo T500 with additional patches. Change-Id: I27cdec5f112588b219f51112279b2dfbb05b6c97 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-07-07ironlake: Add support for x86_64Patrick Rudolph
Allow to compile the experimental x86_64 code. Tested on Lenovo Thinkpad T410. Hangs in SMM relocation. When skipped boots into GNU/Linux. Change-Id: I60f2fccba357cb5fb5d85feb4ee8d02abfe6bc7e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 12:05:17 +0000