summaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2012-03-31Add support for RAM-less multi-processor initKyösti Mälkki
For a hyper-threading processor, enabling cache requires that both the BSP and AP CPU clear CR0.CD (Cache Disable) bit. For a Cache-As-Ram implementation, partial multi-processor initialisation precedes raminit and AP CPUs' 16bit entry must be run from ROM. The AP CPU can only start execute real-mode code at a 4kB aligned address below 1MB. The protected mode entry code for AP is identical with the BSP code, which is already located at the top of bootblock. This patch takes the simplest approach and aligns the bootblock 16 bit entry at highest possible 4kB boundary below 1MB. The symbol ap_sipi_vector is tested to match CONFIG_AP_SIPI_VECTOR used by the CAR code in romstage. Adress is not expected to ever change, but if it does, link will fail. Change-Id: I82e4edbf208c9ba863f51a64e50cd92871c528ef Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/454 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Intel cpus: apply some good programming practices in new CARKyösti Mälkki
Delete dead CAR code and whitespace fixes. Replace cryptic 32bit hex values with existing LAPIC definitions. Do not assume state of direction flag before "rep" instruction. Do not load immediate values on temporary registers when not needed. Parameter pushed on stack was not popped (or flushed) after returning from call. This is a sort-of memory leak if multiple call's are implemented the same way. Change-Id: Ibb93e889b3a0af87b89345c462e331881e78686a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/643 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Intel cpus: cache actual size of the Flash ROM deviceKyösti Mälkki
Cache was enabled for the last 4 MB below 4 GB when ramstage is loaded. This does not cover the case of a 8 MB Flash and could overlap with some system device placed at high memory. Use the actual device size for the cache region. Mainboard may override this with Kconfig CACHE_ROM_SIZE if necessary. Change-Id: I622223b1e2af0b3c1831f3570b74eacfde7189dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/641 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-31Intel cpus: copy model_6ex CAR codeKyösti Mälkki
Copy model_6ex CAR as car/cache_as_ram_ht.inc to be extended with hyper-threading CPU support. Change-Id: I09619363e714b1ebf813932b0b22123c1d89010e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/606 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-30Make MTRR min hole alignment 64MBDuncan Laurie
This affects the algorithm when determining when to transform a range into a larger range with a hole. It is needed when for when I switch on an 8MB TSEG and cause the memory maps to go crazy. Also add header defines for the SMRR. Change-Id: I1a06ccc28ef139cc79f655a8b19fd3533aca0401 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/765 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Fix MB calculation in the reporting of the MTRR holeDuncan Laurie
Change-Id: I34b5c4ffd2a3f3e895d2bffedce1c00ee9aea942 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/763 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30MTRR: add alternate allocation method for odd memory mapsDuncan Laurie
With >= 4GB memory installed we get a memory map split in the middle due to remap that has boundaries that are inconveniently aligned for MTRRs due to the various UMA regions. 0000MB-2780MB 2780MB RAM (writeback) 2780MB-2782MB 2MB TSEG (uncached/SMRR) 2782MB-2784MB 2MB GFX GTT (uncached) 2784MB-2816MB 32MB GFX UMA (uncached) 2816MB-4096MB 1280MB EMPTY (N/A) 4096MB-5368MB 1272MB RAM (writeback) 5368MB-5376MB 8MB ME UMA (uncached) The default MTRR allocation method of trying to cover everything with one MTRR and then carve out a single uncached region does not work for the GPU aperture which needs write-combining type, and it also has issues trying to cover the uneven boundaries in the avaiable variable MTRRs. My goal was to make a minimal set of changes and avoid modifying behavior on existing systems with an algorithm that is not always optimal for a typical memory layout. So the flag 'above4gb=2' will change these allocation behaviors: 1) Detect the number of available variable MTRRs rather than limiting to hardcoded value. We need every last MTRR. 2) Don't try to cover all RAM with one MTRR, instead let each RAM region get covered independently. 3) Don't assume uma_memory_base is part of the last region and increase the size of that region. In this case the UMA region is carved out from the lower memory region and it is already declared as part of the ram region. 4) If a memory region can't be covered with MTRRs >= 16MB then instead make a larger region and trim it with uncached MTRRs. Change-Id: I5a60a44ab6d3ae2f46ea6ffa9e3677aaad2485eb Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/761 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Add Kconfig options to enable TSEG and set a sizeDuncan Laurie
Future CPUs will require TSEG use for SMM Change-Id: I1432569ece4371d6e12c997e90d66c175fa54c5c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/766 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30drop use of MAX_PHYSICAL_CPUS and MAX_CPUS where not neededStefan Reinauer
Change-Id: Idf875ddec417e627f1e72a6d834860e7fd324a50 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/760 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Add an option to keep the ROM cached after romstageStefan Reinauer
Change-Id: I05f1cbd33f0cb7d80ec90c636d1607774b4a74ef Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-25Fix possible deadlock on SMP stop_this_cpuKyösti Mälkki
Do not use printk on the running thread after it has been sent the INIT IPI, execution may halt with console spinlock held. Change-Id: I64608935ea740fb827fa0307442f3fb102de7a08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/776 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-25Intel cpus: Fix deadlock on hyper-threading initKyösti Mälkki
Only the BSP CPU was able to start its hyper-threading CPU siblings. When an AP CPU attempts this it calls start_cpu() within start_cpu(), deadlocking the system with start_cpu_lock. At the time intel_sibling_init() is run, the BSP CPU is still walking the cpu_bus linked list in lapic_cpu_init: start_other_cpus(). A sibling CPU appended at the end of this list will get started. Also fail compile with #error if SERIAL_CPU_INIT==0, as microcode updates on hyper-threading sibling CPUs must be serialized. Tested with HT-enabled P4 Xeons on dual-socket604 platform. Change-Id: I0053f58f49ed604605ce0a55e826d3e1afdc90b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/775 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-17Intel cpus: Include CAR from socketKyösti Mälkki
It was not obvious which CAR was compiled in. Also build would fail if a socket included two models with both having an include for CAR. Change-Id: I000c2e24807c3d99347a43d120333c13fbf91af4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/626 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Rename AMD_AGESA to CPU_AMD_AGESAKyösti Mälkki
Also any CPU_AMD_AGESA_FAMILYxx selects CPU_AMD_AGESA, so remove the explicit selects from the mainboards. Change-Id: I4d71726bccd446b0f4db4e26448b5c91e406a641 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/792 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Fix AMD Agesa leaking KconfigKyösti Mälkki
Kconfig leaked XIP_ROM_SIZE to other platforms and also defined obsolete option XIP_ROM_BASE. Alias AMD_AGESA as NORTHBRIDGE_AMD_AGESA. Break the circular dependency with family15 Kconfig. Change-Id: Ic7891012220e1bef758a5a39002b66971d5206e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/773 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16ROMCC boards have no XIP limitPatrick Georgi
So set their XIP configuration to ROM_SIZE. Change-Id: I6c1abccec3b1d7389c85df55343ff0fc68a61eec Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/797 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-03-16Via Epia-N and C3: Set ioapic delivery type in KconfigPatrick Georgi
The original comment says it's a Via C3 and not Epia requirement to deliver IOAPIC interrupts on APIC serial bus. Change-Id: I73c55755e0ec1ac5756b4ee7ccdfc8eb93184e4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/435 Tested-by: build bot (Jenkins)
2012-03-16Fix address of IDT in real-mode entryKyösti Mälkki
In a case of CS & 0x0fff != 0x0, lidt memory operand does not point to nullidt, this can raise an exception and shutdown the CPU. When an AP CPU receives 8-bit Start-Up IPI vector yzH, it starts execute at physical address 000yz000H. Seems this translates to either yz00:0000 or y000:z000 (CS:IP), depending of the CPU model. With the change entry16.inc is relocatable as the commentary suggests and can be used as ap_sipi_vector on SMP systems. Change-Id: I885a2888179700ba6e2b11d4f2d6a64ddea4c2dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/707 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-09move console includes to central console/console.hStefan Reinauer
Because it's included everywhere anyways. Change-Id: I99a9e6edac08df57c50ef3a706fdbd395cad0abc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/691 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-07Move C labels to start-of-linePatrick Georgi
Also mark the corresponding lint test stable. Change-Id: Ib7c9ed88c5254bf56e68c01cdbd5ab91cd7bfc2f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/772 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Fix MTRR TOM2 WB cache setup for AMD CPUs > revF.Marc Jones
The MTRR check for WB TOM2 setting was only checking revF, not extended family revisions. All families above revf indicate 0xf in the family field and have additional bits in the extended family field. Change-Id: I93d719789acda6b7c42de7fd6d4bad2da866a25f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/627 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Remove whitespace.Patrick Georgi
Fix issues reported by new lint test. Change-Id: I077a829cb4a855cbb3b71b6eb5c66b2068be6def Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-16AGESA F15: AGESA family15 model 00-0fh cpu wrapperKerry Sheh
Change-Id: I7580bc063c09d99d3fca8b20cd39df2384a6ad44 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/555 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-16Intel cpus: use CPU_PHYSMASK_HI define in CARKyösti Mälkki
Unifies models 6ex, 6fx and 106cx. Change-Id: I2bb632c7148a7d937f24eb559f7f4e539d227470 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/638 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-15Intel model_106cx: Use symbolic names for MTRR bitsKyösti Mälkki
Change-Id: I6ea5ca631c22fe870224a498b68d77d85798b3f4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/637 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Rename directories and Kconfig as follows: model_lx -> geode_lx model_gx1 -> geode_gx1 model_gx2 -> geode_gx2 Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-10Intel cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Note: CPU_INTEL_CORE2 was used on both model_6fx and model_1067x. Change-Id: I8fa5ba71b14dcce79ab2a2c1c69b3bc36edbdea0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/618 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-09Add Intel Socket LGA771Sven Schnelle
Change-Id: Iee7d3ff2884d8c43ff1af498160589e551bc9cc8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/492 Tested-by: build bot (Jenkins)
2012-02-09VIA cpus: apply un-written naming rulesKyösti Mälkki
Rename files and directories: model_c3 -> c3 model_c7 -> c7 Change-Id: If144fc501e8ae44b347ac44fa90c689c33a8e126 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/614 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-23post code: Replaced hard-coded post code with macroVikram Narayanan
Added a macro in the post code list, which replaces hard coded value in cpu/x86/cache/cache.c Change-Id: I27cb27827272584a8a17a41c111e2dc155196a97 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-21trivial: spelling fixes in commentsVikram Narayanan
Few spelling fixes in entry16.inc Change-Id: Iad3d18eee3f498171cb766589aaebefdcf0e9767 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/571 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-20Leave SSE and MMX instructions enabled in corebootStefan Reinauer
In order to use SSE+MMX optimized payloads we don't want to disable SSE+MMX instructions in the CPU after romstage. Change-Id: I51aeb01f04492ad7bc8b1fe181a4ae17fe0ca61e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/553 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-10MTRR: get physical address size from CPUIDSven Schnelle
The current code uses static values for the physical address size supported by a CPU. This isn't always the right value: I.e. on model_6[ef]x Core (2) Duo CPUs physical address size is 36, while Xeons from the same family have 38 bits, which results in invalid MTRR setup. Fix this by getting the right number from CPUID. Change-Id: If019c3d9147c3b86357f0ef0d9fda94d49d811ca Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/529 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-09Fix Geode GX2 + LX caching for tiny bootblock.Nils Jacobs
Change-Id: If681a33deb7df752b37c6a8a20482d3c374af936 Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/528 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
2012-01-09ACPI: mark empty get_cst_entries() weakSven Schnelle
This function prevents the linker from choosing the right get_cst_entries(), preventing writing the _CST tables. Change-Id: I4bc0168aee110171faeaa081f217dfd1536bb821 Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/496 Tested-by: build bot (Jenkins)
2011-12-26Fix Fam10 MMCONF_SUPPORT_DEFAULT setting.Marc Jones
I misunderstood how kconfig select works. It needs to be selected with a config option. Moved the select to the correct location. Change-Id: If9b1e21e6cbc5af4671efb76cf87dd18dbbe2234 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/487 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-13Use MMCONF for all AMD family 10 CPUs.Marc Jones
This fixes problems in AP init when multiple APs are trying to access PCI config space. All Fam10 CPUs setup and support MMCONF. Change-Id: I00a25bbf4e4152c89024f14a3c4c1c36b48d0128 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/455 Tested-by: build bot (Jenkins) Reviewed-by: Alec Ari <neotheuser@ymail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-05Bootblock does not need a unique boot_cpu()Kyösti Mälkki
Detection of a CPU being a BSP CPU is not dependent of the existence of northbridge and/or southbridge init code in the bootblock. Even if CONFIG_LOGICAL_CPUS==0, boot_cpu() can get executed on an AP CPU of a hyper-threading CPU and needs to return actual BSP bit from MSR. Change-Id: I9187f954bb357ba1dbd459cfe11cc96cb7567968 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/447 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-24Remove unused code files and cosmetic changesKyösti Mälkki
Following files were no longer used in the build and are deleted: src/arch/x86/init/entry.S src/arch/x86/init/ldscript.ld Also fix ugly whitespace in code copyrights and comments. Change-Id: Ia6360b0ffc227f372d5f997495697a101f7ad81b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/440 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-22k8 raminit: add workaround for erratum #181 on non-fam-fFlorian Zumbiehl
Disable DRAM controller on non-fam-f CPUs not using fam-f register layout. Change-Id: I2cc87857452555011d69bfebe9f9c4c17cef8f6c Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/448 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-11-22Fix post_code in 16bit entryKyösti Mälkki
Relocate early post_code() so it gets executed and does not corrupt BIST at %eax. Change-Id: Ieeebcb23f7c327e501b410eaa60d1e49110ee988 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/439 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01Remove XIP_ROM_BASEPatrick Georgi
The base is now calculated automatically, and all mentions of that config option were typical anyway (4GB - XIP_ROM_SIZE). Change-Id: Icdf908dc043719f3810f7b5b85ad9938f362ea40 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/366 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30Fix slow CAR execution introduced by 7c7d87182feb78cb2bc02fb3558bef56a41682c9Rudolf Marek
It is meant to be a address and not a dereference. Otherwise MTRR is filled with code and not with the address. This is what I hate at most on the AT&T syntax. Instead of taking the address, it was a dereference. Not greatly visible, except I wondered why opcode is not 0xb4 but 0xa1 and it took another half an our to see it. Change-Id: I6b339656024de8f6e6b3cde63b16b7ff5562d055 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/358 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28Get rid of AUTO_XIP_ROM_BASEPatrick Georgi
That value is now generated from a code address and CONFIG_XIP_ROM_SIZE. This works as MTRRs are fully specified by their size and any address within the range. Change-Id: Id35d34eaf3be37f59cd2a968e3327d333ba71a34 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/348 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-25SPEEDSTEP: write _CST tablesSven Schnelle
Change-Id: Idb4b57044808918de343d31519768d0986840f01 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/321 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-18Activate older Xeon P4 microcodesKyösti Mälkki
As new microcode files were included, the table was not updated with families 0f25 and 0f26. Change-Id: I5bb8be9d7c37eb8406dcb48a4b933eab24639bda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/290 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-17Fixes several issues with amd k8 SSDT P-state generationOskar Enoksson
First issue fixed: For multi-socket CPU the current implementation emitted Processor objects for cores in the first CPU only. This commit fixes the bug by really emitting one Processor object for each core. However, the unlikely case of mixed CPU models is still not handled correctly. Second issue fixed: One loop was wrong in case a processor in the table declares no P-states at all. The rewritten loop is safe. Some possibly dangerous array lengths were also fixed. Third issue: on MP-boards the recommended ramp-voltage (RVO) is 0mV according to the BKDG. The current implementation always set it to 25mV. This commit selects 0 or 25mV depending on CONFIG_MAX_PHYSICAL_CPUS. Fourth issue: If a processor without PowerNow! support was inserted in a system with coreboot configured with SET_FIDVID then the boot process hanged mysteriously and very early. Apparently because init_fidvid_ap tampers with non-existing registers. This commit fixes the bug by bailing out from init_fidvid_ap if PowerNow! capability is missing. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: I61f6e2210b84ccba33a36c5efc866447b7134417 Reviewed-on: http://review.coreboot.org/239 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-15SMM: Move wbinvd after pmode jumpStefan Reinauer
According to Rudolf Marek putting a memory instruction between the CR0 write and the jmp in protected mode switching might hang the machine. Move it after the jmp. There might be a better solution for this, such as enabling the cache, as keeping it disabled does not prevent cache poisoning attacks, so there is no real point. However, Intel docs say that SMM code in ASEG is always running uncached, so we might want to consider running SMM out of TSEG instead, as well. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Id396acf3c8a79a9f1abcc557af6e0cce099955ec Reviewed-on: http://review.coreboot.org/283 Reviewed-by: Sven Schnelle <svens@stackframe.org> Tested-by: build bot (Jenkins)
2011-10-13Load an IDT with NULL limitStefan Reinauer
Load an IDT with NULL limit to prevent the 16bit IDT being used in protected mode before c_start.S sets up a 32bit IDT when entering ram stage. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I8d048c894c863ac4971fcef8f065be6b899e1d3e Reviewed-on: http://review.coreboot.org/259 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11Fixed broken MTRR for >4GB memory on AMD K8 fam 0fh rev <=EOskar Enoksson
AMD K8 rev F and later implements a bit SYSCFG_MSR_TOM2WB to mark dram memory above 4GB as WB. However, AMD K8 rev E and earlier don't implement this bit and therefore need MTRR spanning dram memory above 4GB. The current implementation of amd_setup_mtrrs never generate MTRR above 4GB. This caused memory > 4GB not to be recognized in e.g. Linux on those rev E or older platforms. This commit should fix that bug. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: Ie568a52a8eb355969c86964d5afc4692e60f69c1 Reviewed-on: http://review.coreboot.org/238 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-24Add AMD Family 10h PH-E0 supportQingPei Wang
the patch file comes from src/vendorcode/amd/agesa/f12/Proc/CPU/Family/0x10/RevE /F10MicrocodePatch010000bf.c Change-Id: If701c8a908edf1c486665d3ce4df65da0f65c802 Signed-off-by: QingPei Wang <wangqingpei@gmail.com> Reviewed-on: http://review.coreboot.org/202 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-12Miscellaneous AMD F14 warning fixesefdesign98
This commit adds in some more fixes to AMD F14 compile warnings. The change in the mtrr.c file is in prep- aration for changes yet to com, but it is currently innocuous. Change-Id: I6b204fe0af16a97d982f46f0dfeaccc4b8eb883e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/133 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-09Crank up CPU speed on Intel Core and Core2 CPUsPatrick Georgi
The CPUs start on their slowest speed, and were left that way by coreboot. This change will speed up coreboot a bit, as well as systems that don't change the clock for whatever reason. Change-Id: Ia6225eea97299a473cf50eccc6c5e7de830b1ddc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/176 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 Rev C0 updateKerry She
Add AMD Family14 Rev C0 cpu id Change-Id: Iacd1c7b20e889da61a2085188766285f27e5c018 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/160 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-06Update AMD F14 Agesa to support Rev C0 cpusefdesign98
This change updates the AMD Agesa code to support the Family 14 rev C0 cpus. It also fixes (again) a ton of warnings, although not all of them are gone. The warning fixes affect code in the Family 12 tree as well, so there are some small changes therein. This code has been tested on a Persimmon and passes Abuild. This is the first (and largest) of a number of commits to complete the upgrade. Change-Id: Id28d9bf7931f8baa2a602f6bb096a5a465ccd20d Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/131 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-04cpu/intel/slot_1: Init L2 cache on SECC(2) CPUs.Keith Hui
Bring from coreboot v1 support for initializing L2 cache on Slot 1 Pentium II/III CPUs, code names Klamath, Deschutes and Katmai. Build tested on ASUS P2B-LS and P3B-F. Boot tested on P2B-LS with Pentium III 600MHz, Katmai core. Also add missing include of model_68x in slot_1, to address a similar problem fixed for model_6bx by r5945. Also change Deschutes CPU init sequence to match Katmai. Change-Id: I502e8481d1a20f0a2504685e7be16b57f59c8257 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: http://review.coreboot.org/122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-22Add SSE3 dependent codeefdesign98
This change separates out changes that were initially found in the commit for XHCI and AHCI changes to "arch/x86/Makefile. inc". It also corrects a comment. The SSE3 dependent code adds a pair of CR4 access functions and a blob of code that re-sets CR4.OSFXSR and CR4.OSXMMEXCPT. Change-Id: Id97256978da81589d97dcae97981a049101b5258 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/113 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-18Add AMD Family 10 support to cpu folderefdesign98
This change adds the AMD Family 10 cpu support to the cpu folder. It also updates the makefiles of the Families 12 and 14 to take advantage of a pair of shared files that are moved to the cpu/agesa folder. Change-Id: Ibd3a50ea7a3028bd6a2d2583f021506b73e2fce2 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/97 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-13Make AMD SMM SMP awareRudolf Marek
Move the SMM MSR init to a code run per CPU. Introduce global SMM_BASE define, later all 0xa0000 could be changed to use it. Remove the unnecessary test if the smm_init routine is called once (it is called by BSP only) and also remove if lock bit is set becuase this bit is cleared by INIT it seems. Add the defines for fam10h and famfh to respective files, we do not have any shared AMD MSR header file. Tested on M2V-MX SE with dualcore CPU. Change-Id: I1b2bf157d1cc79c566c9089689a9bfd9310f5683 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/82 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-04Small SMM fixupsRudolf Marek
Align the spinlock to the 4 byte boundary (CPU will guarantee atomicity of XCHG). While at it add the PAUSE instruction to spinlock loop to hint the CPU we are just spinlocking. The rep nop could not be used because "as" complains that rep is used without string instructions. Change-Id: I325cd83de3a6557b1bee6758bc151bc81e874f8c Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/81 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
This change adds the wrapper code for the AMD Family12 cpus and the AMD Hudson-2 (SB900) southbridge to the cpu, northbridge and southbridge folders respectively. Change-Id: I22b6efe0017d0af03eaa36a1db1615e5f38da06c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/53 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-22Move existing AMD Ffamily14 code to f14 folderefdesign98
This change moves the AMD Family14 cpu Agesa code to the vendorcode/amd/agesa/f14 folder to complete the transition to the family oriented folder structure. Change-Id: I211e80ee04574cc713f38b4cc1b767dbb2bfaa59 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/52 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-18SMM: flush caches after disabling cachingSven Schnelle
Fixes spurious SMI crashes i've seen, and ACPI/SMM interaction. For reference, the mail i've sent to ML with the bugreport: whenever i've docked/undocked the thinkpad from the docking station, i had to do that twice to get the action actually to happen. First i thought that would be some error in the ACPI code. Here's a short explanation how docking/undocking works: 1) ACPI EC Event 0x37 Handler is executed (EC sends event 0x37 on dock) 2) _Q37 does a Trap(SMI_DOCK_CONNECT). Trap is declared as follows: a) Store(Arg0, SMIF) // SMIF is in the GNVS Memory Range b) Store(0, 0x808) // Generates I/O Trap to SMM c) // SMM is executed d) Return (SMIF) // Return Result in SMIF I've verified that a) is really executed with ACPI debugging in the Linux Kernel. It writes the correct value to GNVS Memory. After that, i've logged the SMIF value in SMM, which contains some random (or former) value of SMIF. So i've added the GNVS area to /proc/mtrr which made things work. I've also tried a wbinvd() in SMM code, with the same result. After reading the src/cpu/x86/smm/smmhandler.S code, i've recognized that it starts with: movw $(smm_gdtptr16 - smm_handler_start + SMM_HANDLER_OFFSET), %bx data32 lgdt %cs:(%bx) movl %cr0, %eax andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */ orl $0x60000001, %eax /* CD, NW, PE = 1 */ movl %eax, %cr0 /* Enable protected mode */ data32 ljmp $0x08, $1f ...which disables caching in SMM code, but doesn't flush the cache. So the problem is: - the linux axpi write to the SMIF GNVS Area will be written to Cache, because GNVS is WB - the SMM code runs with cache disabled, and fetches SMIF directly from Memory, which is some other value Possible Solutions: - enable cache in SMM (yeah, cache poisoning...) - flush caches in SMM (really expensive) - mark GNVS as UC in Memory Map (will only work if OS really marks that Area as UC. Checked various vendor BIOSes, none of them are marking NVS as UC. So this seems rather uncommon.) - flush only the cache line which contains GNVS. Would fix this particular problem, but users/developers could see other Bugs like this. And not everyone likes to debug such problems. So i won't like this solution. Change-Id: Ie60bf91c5fd1491bc3452d5d9b7fc8eae39fd77a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/39 Tested-by: build bot (Jenkins)
2011-06-15SMM: don't overwrite SMM memory on resumeSven Schnelle
Overwriting the SMM Area on resume leaves us with all variables cleared out, i.e., the GNVS pointer is no longer available, which makes SMIF function calls impossible. Change-Id: I08ab4ffd41df0922d63c017822de1f89a3ff254d Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/34 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-05-15Cosmetic cleanup.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6594 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Correct the number of MCA error reporting banks cleared.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6571 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-151) Initialize BSP fixed MTRRs to match AP fixed MTRR initialization.Scott Duplichan
2) Remove coreboot variable MTRR initialization because AMD reference code handles it. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6570 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-10Change read_option() to a macro that wraps some API uglynessPatrick Georgi
Simplify read_option(CMOS_VSTART_foo, CMOS_VLEN_foo, somedefault) to read_option(foo, somedefault) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6565 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-10This replaces the fixed shift values in the apic timer init with macros.Vikram Narayanan
Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-03Enable caching for ROM area in model_6ex/cache_as_ram.incSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6554 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-26Add support for memory mapped UARTs to coreboot and add the OXPCIe952 as anStefan Reinauer
example. This newer version reflects the recent changes to further simplify the console code and partly gets rid of some hacks in the previous version. Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6544 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixes.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6537 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-19Fix some more misuses of ifdef/if definedStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6515 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14drop half an uart8250 implementation from smiutil and use the common code Stefan Reinauer
for that instead. This also allows using non-uart8250 consoles for smi debugging. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6501 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14earlymtrr.c: wipe some dead code, use names instead of numbers and someStefan Reinauer
cosmetics. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6499 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14drop incorrectly used CONFIG_ROM_IMAGE_SIZE and unused CONFIG_ARCHStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6496 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14Use symbolic names for some MTRR bits instead of numbers in CAR codeStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6493 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28Add AMD C32 support.Zheng Bao
It is based on other existing Fam10 code. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6464 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-17Fix breaking the build after removing files in tthe previous checkin. Marc Jones
Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6453 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-04Add P-states for select Socket 754 processors.Jonathan Kollasch
States for AMA3000BEX5AR, SDA3100AIO3BX, and SDA3400AIO3BX are from AMD document 30430 3.51. States for ADA3200AIO4BX derived from SSDT of a MS-7135. States for TMDML34BKX5LD derived from legacy PowerNow! table of a MS-7135, and therefore lack accurate TDP information. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6432 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-03Correct off-by-one problem in AMD pre-rev-F model-F PowerNow code.Jonathan Kollasch
With this change the last P-state entry of the last CPU in the table is successfully conveyed into the SSDT. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6430 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6411 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6410 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6409 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. In fact I changed coreDelay before deleting the code in fidvid that called it. But there're still a couple of calls from src/northbridge/amd/amdmct/wrappers/mcti_d.c Since the comment encouraged fixing something, I parametrized it with the delay time in microseconds and paranoically tried to avoid an overflow at pathological moments. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6408 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Well, I understand it better like this, but maybe it's only me, part of the changes are paranoic, and the only effective change is for a factor depending on mobile or not that I can't test. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6406 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add an untested step in BKDG 2.4.2.8. I don't have the hardware with Core Performance Boost and I think it's only available in revision E that does not even have a constant yet. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6405 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add to init_fidvid_stage2 some step mentioned in BKDG 2.4.2.7 that was missing . Some lines are dead code now, but may handy if one day we support revison E CPUs. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6404 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add to init_fidvid_stage2 some step for my CPU (rev C3) mentioned in BKDG 2.4.2.6 (5) that was missing Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6403 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Looking at BKDG the process for updating Pstate Nb vid after warn reset seemed more similar to the codethat was there fo pvi than the one for svi, so I called the pvi function passing a pvi/svi flag. I don't find documentation on why should UpdateSinglePlaneNbVid() be called in PVI, but since I can't test it, I leave it as it was. This patch showed some progress beyond fidvid in my boar,d but only sometimes, most times it just didn't work. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6402 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Factor out some common expressions. Add an error message when coreboots hangs waiting for a pstate that never comes (it happened to me), and throw some paranoia at it for good mesure. If I understood BKDG fam10 CPUs never need a software initiated vid transition, because the hardware knows what to do when you just request a Pstate change if the cpu is properly configured. In fact unifying a little what PVI and SVI do was better for my board (SVI). So I drop transitionVid, which I didn't understand either (why did it have a case for PVI if it is never called for PVI ? Why did the PVI case distinguigh cpu or nb when PVI is theoretically single voltage plane ? ). Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Contemplate the possibility of nbCofVidUpdate not being defined, trying to get closer to BKDG Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Configuration of F3x[84:80] was hardcoded for rev B. I change that for some code that checks for revision and configures according to BKDG. Unfinished but hopefully better than it was. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6398 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. BKDG says nbSynPtrAdj may also be 6 sometimes. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6397 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 18:00:39 +0000