| Age | Commit message (Collapse) | Author |
|---|
|
This moves the definition for POST_BOOTBLOCK_CAR from the intel-specific
postcodes into the common postcode list, and uses it for the
cache-as-RAM init as needed.
Because POST_BOOTBLOCK_CAR was set to 0x20 in some spots and 0x21 in
most of the others, the values were consolidated into 0x21. This will
change the value on some platforms.
Any conflicts should get sorted out later in the conversion process.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8527334e679a23006b77a5645f919aea76dd4926
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Found-by: linter
Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id24a7c7db24f49672df9d5ceefec5b7596f23e09
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
APs use a lot less stack, so set up a separate stack for those in .bss.
Now that CPU_INFO_V2 is the only code path that is used, there is no
need to align stacks in c_start.S.
Change-Id: I7a681a2e3003da0400843daa5d6d6180d952abf5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
If selected, libgnat is linked into romstage. In addition, a call to
romstage_adainit() is added to support Ada program data
initialization.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Ada code compiles for romstage and loads successfully
Change-Id: I74f0460f6b14fde2b4bd6391e1782b2e5b217707
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70274
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang generates R_X86_64_32S symbols that get truncated.
TESTED:
- prodrive/hermes boots with GCC and clang
- MTRR are properly cleared (tested by filling in both
MTRR_FIX_64K_00000 and MTRR_FIX_4K_F8000 before clearing)
Change-Id: I6a5139f7029b6f35b44377f105dded06f6d9cbf9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
After the previous patch this local variable is no longer the mpinit CPU
index, but the LAPIC ID, so rename it. Since it will only be set once,
it can also be marked as const.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4fad4e1095478213727bee8586852f9d5a7d18e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70798
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The cpu_index function can't be used before mpinit, so use lapicid calls
instead. This fixes the regression introduced by commit 4c3749884d71
("cpu/x86/mtrr: Print cpu index number when set up MTRRs for BSP/APs")
and also reverts also commit b3261661c703 ("cpu/x86/mtrr/mtrr: fix
printk format strings"), since lapicid returns an unsigned int while
cpu_index returns an unsigned long.
TEST=Mandolin boots again and doesn't fail when it first tries to print
the MTRR configuration
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0d226704051ab171891775a618ce7897b74fde16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70797
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Make sure that a pointer exists before dereferencing it.
Change-Id: I1a9833bb9686451224249efe599346f64dc37874
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The struct device passed to this function is the cpu cluster and not
individual lapic. This fixes a regression introduced by
cdb26fd (cpu/intel/model_206ax: Remove fake lapic device)
Change-Id: I586e13a723303b8d639d526a175bd6828465a607
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Commit 4c3749884d71 ("cpu/x86/mtrr: Print cpu index number when set up
MTRRs for BSP/APs") added the CPU index number to some prints, but used
%x as format specifier. The cpu_index() call however has a return type
of unsigned long, so %lx needs to be used instead. For consistency, also
change the type of the cpu_idx local variable in commit_fixed_mtrrs to
unsigned long and adjust the printk format specifier accordingly.
TEST=The code builds again on my computer
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b68f8355932b2b75db5f453a0a735185b24b02f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70664
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MTRR setup will be assigned to all APs. It's hard to debug
race condition without showing apic id.
Change-Id: Ifd2e1e411f86fa3ea42ed50546facec31b89c3e1
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
There is no need to pass the CPU index around.
Change-Id: Iad8e3cb318e6520ac5877118dbf43597dedb75b9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
There are four requirements for the SMI to hit a printk()
this commit now removes.
Build must have DEBUG_SMI=y, otherwise any printk() is a no-op
inside SMM.
ASL must have a TRAP() with argument 0x99 or 0x32 for SMIF value.
Platform needs to have IO Trap #3 enabled at IO 0x800.
The SMI monitor must call io_trap_handler for IO Trap #3.
At the moment, only getac/p470 would meet the above criteria
with TRAP(0x32) in its DSDT _INI method. The ASL ignores any
return value of TRAP() calls made.
A mainboard IO trap handler should have precedence over
a southbridge IO trap handler. At the moment we seem to have
no cases of the latter to support, so remove the latter.
Change-Id: I3a3298c8d9814db8464fbf7444c6e0e6ac6ac008
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
C5, C6 and slfm depend on the southbridge and the northbridge to be able
to provide this functionality, with some just lacking the possibility to
do so. Move the devicetree configuration to the southbridge.
This removes the need for a magic lapic in the devicetree.
Change-Id: I4a9b1e684a7927259adae9b1d42a67e907722109
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Instead of using a fake lapic device hook up the cpu cluster to chip
cpu/intel/model_206ax.
The lapic device is also not needed as the mp init will allocate it for
the BSP at runtime.
Change-Id: Id3b1c4ca027e2905535e137691c3e3e60417dbf3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Also remove the now unnecessary comments from the devicetree.
Change-Id: Iebbe12fd413b7a2eb1078a579e194eba821ada7c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Both SMM_ASEG and SMM_TSEG choices work.
There is periodic TCO timeout occurring.
At least with DEBUG_SMI kernel reports low memory corruption.
Change-Id: If20a7092117612a1a9e25eb6ac480e105acd57d7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Move the chip configuration to the cpu cluster device.
It looks like none of the devicetree were featuring a lapic 0xacac,
nor was tcc_offset ever set, so this remains a NOP.
Change-Id: I296631511b0e31b0ed43ca8193552483bdab4482
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59315
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The cpu cluster is always present and it's the proper device to contain
the settings that need to be applied to all cpus. This makes it possible
to remove the fake lapic from devicetrees.
Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59314
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This moves a lot of post code values, but unifies them between
platforms, so that the same value means the same thing as much as
possible.
The P4-netburst code was the most extensive and most different, so that
dictated the majority of the values. Three were two values there that
didn't match the other files, so those two values, 0x22 & 0x29 have
duplicate entries in the table.
The rest of the entries are similar between platforms, though the values
for many of them were moved to match the P4-netburst values.
POST_BOOTBLOCK and POST_POSTCAR values are intended to eventually become
global, while POST_SOC would be specific to the Intel platforms.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If13e40b700a41d56bca85510d68da0ab31a235a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69866
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I12463d4d26c03c85fa018b421bb9166fbfeb0b60
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69801
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove SSE when SSE is already selected by supported CPUs.
Add "config SOCKET_SPECIFIC_OPTIONS" section to socket_p/Kconfig.
Change-Id: If2265ac716e90720e7ccc550239737d40c2f7a0a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Id50ebecdaddcce426b15d535afcc3e755f2c5a35
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
We have equivalent southbridge_smi_set_eos().
Change-Id: I03a48f0ec9efac2a220aa4ca502a5f504d78c585
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Idca56583c1c8dc41ad11d915ec3e8be781fb4e48
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Doing this in C code is way easier to understand. Also the thread local
storage is now in .bss instead of the AP stack. This makes it more
robust against stack overflows, as APs stacks overflow in each other.
TESTED: work on qemu.
Change-Id: I19d3285daf97798a2d28408b5601ad991e29e718
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69435
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This makes it easier to get the content of an msr into a full 64bit
variable.
Change-Id: I1b026cd3807fd68d805051a74b3d31fcde1c5626
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68572
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The disablement of SSE2 was not honoured since there is explicit
select under CPU_INTEL_MODEL_F2X. The removed commentary originates
probably from ROMCC romstage implementation.
Change-Id: I7d9ac007406a82c498f3ed23568e2ff064504983
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69443
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I2b611773e596bea4788b05a3f58485fb3e002402
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69362
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This reverts commit eb76a455cd39ec59b7f2ba28baeec9538befd59e
and applies minor fixes to make it build again.
PARALLEL_MP was working prior to board removal and no
relevant SMI handlers were implemented. So NO_SMM choice
is now selected.
Change-Id: Ia1cd02278240d1b5d006fb2a7730d3d86390f85b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These symbols and codepaths are unused now so drop them.
Change-Id: I7c46c36390f116f8f8920c06e539075e60c7118c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69361
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code was never tested with SSE enabled. Now qemu enables it and
FX_SAVE encroaches on the save states. Without SSE enabled the handler
just happened to be aligned downwards enough to have the save states
fit. With SSE enabled that's not the case. The proper fix is to give the
code setting up stubs the right base address, which is the same as for
the TSEG codepath.
Change-Id: I45355efb274c6ddd09a6fb57743d2f6a5b53d209
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69233
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Also sort includes.
Change-Id: Ia4a3807e45777e2a596878fe09e3c80b1fd2704d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Now that all platforms use parallel_mp this is the only codepath used
for cpu_info() local thread storage.
Change-Id: I119214e703aea8a4fe93f83b784159cf86d859d3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69122
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This codepath is deprecated after the 4.18 release.
Change-Id: I7e90f457f3979781d06323ef1350d5fb05a6be43
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69121
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This is deprecated after the 4.18 release.
Change-Id: I17327c31f8ade51716578e45c2d90a327efcd4ad
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69128
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that all agesa CPUs are removed this code is unused.
Change-Id: If0c082bbdb09457e3876962fa75725add11cb67c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69118
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This platform use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: I589f30ccf81b6cf243ac7cbf8320a3f830649ad8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69117
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This platform use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: I18eb1c1ccad16980a4e57318dec411b82c45b25a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69116
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This platform use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: Ieaac0a32e71d208b66fd2c4e26f5349abc921d4f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69115
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This board use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: Idf37ade31ddb55697df1a65062c092a0a485e175
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69114
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I80baadd405b31d6be2fdbb894b0f4b7c775da6f8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit 1bb9786da30e ("cpu/x86/mp_init.c: Set a bogus
initial lapic_id"), since it breaks MP init on amd/mandolin:
[INFO ] CPU #0 initialized
[INFO ] Initializing CPU #3
[INFO ] Initializing CPU #1
[INFO ] Initializing CPU #2
[EMERG] CPU: missing CPU device structureCPU: vendor AMD device 810f81
[DEBUG] CPU: family 17, model 18, stepping 01
[DEBUG] microcode: patch id to apply = 0x08108109
[INFO ] microcode: being updated to patch id = 0x08108109 succeeded
[INFO ] CPU #1 initialized
[ERROR] MP record 3 timeout.
[INFO ] bsp_do_flight_plan done after 1206 msecs.
[ERROR] MP initialization failure.
[EMERG] mp_init_with_smm failed. Halting.
TEST=The board boots again with the revert applied
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic1cae88f7345f9ff79e8f6e574521095b57c8cb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69186
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Bail out of mp_init if this function fails.
Change-Id: I7be5d6c32458ba98f4f8c5c9340790ff989c91e7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69109
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This makes it easier to catch errors later if the ap_init code fails to
properly set things up.
Change-Id: I938faf042bfa4fe1fc39e78ab740c9b210bc105c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69108
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
There is no need to keep track of device structures separately.
Change-Id: Ie728110fc8c60fec94ae4bedf74e17740cf78f67
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch fixes the typecasting issue, that is conversion from 'int' to
'unsigned long long int'. This changes value from '0x8000 0000' to
'0xFFFF FFFF 8000 0000'.
During unit testing, the argument is getting changed to an unexpected
number which is resulting to an exception when IA32_HWP_REQUEST MSR is
updated. In this update, the MSR's reserved bits are getting updated, so
this causes exception.
TEST= Verified the code on the Gimble.
No exception is seen after the fix.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I35d382c792b9df260381b7696f3bbff43d6c4dc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Adjust timeout for final SIPI to satisfy some to-be-launched
server processors.
Add a spew print to display how long it takes for the APs
to be ready. This is intended to facilitate only troubleshooting
and trend analysis.
Change-Id: Id958f18bdcb34d76df8aa443161123252524328e
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68262
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for Haswell.
Currently BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is selected for
CPU_INTEL_HASWELL (see [2]). However, there seems to be no
particular reason on those platforms. Flashconsole works on Broadwell,
at least, and it writes to flash as early as bootblock. Therefore,
remove BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES, so that VBOOT_VBNV_FLASH
can be enabled.
[1] https://issuetracker.google.com/issues/235293589
[2] commit 6c2568f4f58b9a1b209c9af36d7f980fde784f08 (CB:45740)
drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES config
BUG=b:235293589
TEST=./util/abuild/abuild -t LENOVO_THINKPAD_T440P -a (with VBOOT)
Change-Id: If1430ffd6115a0bc151cbe0632cda7fc5f6c26a6
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I01c6651079333686cb0eb68e89e56d7907868124
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ie760711916c49d275ca49d94b9597fd24b5e7628
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Pre-sandy bridge hardware is likely affected by the sinkhole
vulnerability. Intel sandy bridge and newer has hardware mitigations
against this attack according to
https://github.com/xoreaxeaxeax/sinkhole.
Change-Id: I52cb20e0edac62475597b31696f38d0ffc6080de
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
config.h is a dependency so add it.
Change-Id: Iac87039dd43aa75d49766b9a239fbd841ca6850c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I0ab39ff20b0fb59026063e064e20ce901c2985fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I9b85836ac21da5b885a97f05e3973fb23a052fd5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I84639389ac1066468b82bb13d684e5423b909fcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I36c54e62797e67c1732f8deaf8843daf35610e22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Remove <stdint.h>, <stddef.h> and add <stdbool.h>. All of them are
included through <types.h>.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: If5296988c68302896e3676d7b80d0f133d5d4264
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
use is_enabled_cpu() on cycles over device list to check
whether the current device is enabled cpu.
TEST: compile test and qemu run successfully with coreinfo
payload
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: If64bd18f006b6f5fecef4f606c1df7d3a4d42883
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67797
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Replace nodeid() function in cpu/x86/smm/smihandler.c with calling
lapicid() from include/cpu/x86/lapic.h.
TEST=Timeless build for lenovo/g505s which includes this file in the
build results in identical firmware image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I336ca9888e24e4d6f10a81cc4f3760c9d7c8f4bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I599e26a40ab584232614440612e95c91a698df27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Instead of defining NUM_FIXED_MTRRS in both cpu/x86/mp_init.h and
cpu/x86/mtrr/mtrr.c in two different ways that will evaluate to the same
value, define it once in include/cpu/x86/mtrr.h which is included in
both C files.
TEST=Timeless build for amd/mandolin results in identical firmware image
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71cec61e22f5ce76baef21344c7427be29f193f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Instead of redefining the register address in smihandler.c, use the
existing definitions from include/cpu/x86/lapic_def.h.
TEST=Timeless build for lenovo/g505s which includes this file in the
build results in identical firmware image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id22f9b5ce53c7bced6bbcc3f5026d4c793b34f78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67776
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CB:63475 inadvertently disabled the STM by moving its load point
off of the MSEG boundry, which is a hardware requirement. In
addition, the BIOS resource list cannot be located within the
MSEG. This patch fixes the issue by moving the STM load point
to the MSEG boundry and placing the bios resource list just below
the MSEG where the STM setup functions can find it.
Fixes: commit 5747f6c (cpu/x86/smm_module_loader.c Rewrite setup)
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Change-Id: I7359939063bb1a172fcb701551c099edebfbedd5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67665
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The µcode updates for Broadwell come from coreboot's blobs submodule
and have not been updated in at least 7 years. Use the µcode updates
available in the intel-microcode submodule. This change forgoes some
µcode updates for old Broadwell ULT/ULX steppings with CPUID 0x306d2
and 0x306d3, as well as an old µcode update for Haswell ULT/ULX CPUs
with CPUID 0x40651 in favor of a newer intel-microcode revision that
was already being used: when the µcode updates are concatenated into
one file, the newer µcode update revision would be placed before the
older revision, so the latter would never be used.
Change-Id: I67f8a58552bd211095c183e6f7a219d60e3be162
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Commit 27126f135dad3c0e2f91394e7088b2ff50220146 (cpu/intel/haswell: add
Crystal Well CPU IDs) introduced new Haswell CPUIDs but did not include
any µcode updates for them. It is unknown how this could have worked as
the initial µcode inside the CPU can be quite unstable. Intel CPUs with
support for FIT (Firmware Interface Table) can have their µcode updated
before the x86 reset vector is executed.
The µcode updates for Crystal Well CPUID 0x40661 can be found inside the
intel-microcode submodule. There are no publicly available µcode updates
for Crystal Well CPUID 0x40660 as it is a pre-production stepping, which
is not meant to be used anymore. Hook up the available µcode updates for
Crystal Well CPUs.
Change-Id: If5264f333e681171a2ca4a68be155ffd40a1043b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
There are two types of Haswell/Broadwell platforms: Trad(itional) with
separate CPU and PCH packages, and ULT/ULX where the CPU and PCH share
one package. Mainboards can specify which platform type they are using
the `INTEL_LYNXPOINT_LP` Kconfig option. There are so many differences
between Trad and ULT/ULX that it's not worth doing runtime detection.
The CPUIDs are different for Trad and ULT/ULX platforms, and so are the
µcode updates. So, including Trad µcode updates in a coreboot image for
an ULT/ULX mainboard makes no sense, and vice versa.
Adapt the Makefile so that only relevant µcode updates are added. Also,
add a few comments to indicate which updates correspond to which CPUs.
TEST=Run binwalk on coreboot.rom to verify included µcode updates for:
- Asrock B85M Pro4 (Haswell Trad)
- HP Folio 9480M (Haswell ULT/ULX)
- Purism Librem BDW (Broadwell ULT/ULX)
Change-Id: I6dc9e94ce9fede15cbcbe6be577c48c197a9212a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
AMD CPUs have a convenient MSR that allows to set the SMBASE in the save
state without ever entering SMM (e.g. at the default 0x30000 address).
This has been a feature in all AMD CPUs since at least AMD K8. This
allows to do relocation in parallel in ramstage and without setting up a
relocation handler, which likely results in a speedup. The more cores
the higher the speedup as relocation was happening sequentially. On a 4
core AMD picasso system this results in 33ms boot speedup.
TESTED on google/vilboz (Picasso) with CONFIG_SMI_DEBUG: verify that SMM
is correctly relocated with the BSP correctly entering the smihandler.
Change-Id: I9729fb94ed5c18cfd57b8098c838c08a04490e4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Haswell and Broadwell platforms usually stitch six microcode
patches. It has worked so far with the default value of four thanks a
bug which is being fixed by `util/ifittool: Error out if microcodes do
not fit the FIT table' commit.
BUG=b:245380705
TEST=Jenkins build without failing on the FIT table size
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I23bf79a3e8918499f6c51e6ef829312d5872181a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This is the same for all supported AMD hardware.
Change-Id: Ic6b954308dbb4c5a2050f1eb8f15acb41d0b81bd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67617
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since mono_time is now 64-bit, the utility functions interfacing with
mono_time should also be 64-bit so precision isn't lost.
Fixed build errors related to printing the now int64_t result of
stopwatch_duration_[m|u]secs in various places.
BUG=b:237082996
BRANCH=All
TEST=Boot dewatt
Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The X2APIC_LATE_WORKAROUND kconfig allows bringing APs in XAPIC mode initially hence, it won't work if LAPIC ID is > 0xff.
This patch ensures the MAX_CPUS logic is appropriate while selecting X2APIC_LATE_WORKAROUND kconfig from SoC.
BUG=b:219061518, b:219053812
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I466e6cc568024a9dea80af21e0ebf3572e74a1f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ib852d0b2cf4d3cbdf7475bd5493bf2e585a5894a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Most of these changes are suggested by clang-format(13.0-54) tool on
Debian testing.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ie4fe0e872e94f38079945970848fefd153ab7cb5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Intel Meteor Lake SoC expects to select late x2APIC enablement where
AP bring up will use xAPIC and later x2APIC gets enabled using CPU init.
This patch provides an option where SoC code choose the correct
LAPIC access mode using choice selection.
BUG=b:219061518, b:219053812
TEST=Able to build Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6b50a0f5e39a95c25cd2c72219d2b402550a6fad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65786
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add option to do AP bringup with LAPICs in XAPIC mode and
switch to X2APIC later in CPU init.
Change-Id: I94c9daa3bc7173628f84094a3d5ca59e699ad334
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65766
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I420b9506381758c63b88435a915672507e8bc465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I9b710d279da6db9125519f58ecba109a4d9fa8e3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This moves the die() statement to a common place.
Change-Id: I24c9f00bfee169b4ca57b469c089188ec62ddada
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I73174766980e0405e7b8efd4f059bb400c0c0a25
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The do_smm struct element in the mp_state struct was an int even though
it only had two possible states, so change it to bool to make this more
obvious. Also change the return type of is_smm_enabled from int to bool.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8d2d95f0497649d67565243d14a5ab9c9cdda412
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch changes the serial message type to BIOS_WARNING as sometimes
it may raise a wrong signal when microcode resides inside other part
of the IFWI instead /CBFS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I714bf74a91c2d783982c5e5ca76a70deed872473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65316
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds an error msg if intel_microcode_find() is unable to
find a microcode for the CPU SKU.
TEST=Able to see the error msg in coreboot serial log in case packed
with wrong microcode binary.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib4865575a44d2c8c6c3a20c2823a546d8f261e52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65285
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch refactors the microcode loading and reloading API with a
helper function that perform the actual MSR write operation after
taking the microcode pointer from the caller function.
Also, convert the microcode loading failure msg type from `BIOS_INFO`
to `BIOS_ERR` to catch the error in proper.
TEST=Able to perform microcode loading on google/kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9a7cdc2d2c9211f1e0c7921015126f7a1be87761
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65249
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces a newer API to reload the microcode patch when
SoC selects RELOAD_MICROCODE_PATCH config.
Expected to call this API being independent of CPU MP Init regular
flow hence, doesn't regress the boot time.
BUG=b:233199592
TEST=Build and boot google/kano to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If480e44b88d04e5cb25d7104961b70f7be041a23
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
There is a lot of going back-and-forth with the KiB arguments, start
the work to migrate away from this.
Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Prior commit hash 0310d34c2 (cpu/intel/microcode: Have provision to
re-load microcode patch) introduces an option to reload the microcode
based on SoC selecting RELOAD_MICROCODE_PATCH config.
This patch might potentially introduce a boot time regression (~30ms)
when RELOAD_MICROCODE_PATCH kconfig is enabled as all cores might end up
reloading the microcode without the proper need.
Note: RELOAD_MICROCODE_PATCH kconfig is not yet selected by any SoC
hence, it doesn't impact any coreboot project.
The idea is reloading microcode depends on specific use case
(for example: Skip FSP doing MP Init from Alder Lake onwards) hence,
a follow up patch will create a newer API to allow reloading of
microcode when RELOAD_MICROCODE_PATCH config is enabled.
BUG=b:233199592
TEST=Build and boot google/kano to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie320153d25cefe153fc8a67db447384f1f20f31f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
When switching to different board, 'make clean' needs to happen because
not everything gets properly regenerated. Microcode updates are among
those. You could end up with the microcode updates from the previous
build which can be incorrect. Adding $(DOTCONFIG) as a dependency which
gets updated when you change something in Kconfig fixes this.
TESTED: swap between boards that use different microcode and see that
the size changes.
Change-Id: Id1edecc28d492838904e3659f1fe8c9df0a69134
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65148
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This fixes following errors when building GA-945GCM-S2L with clang 14.0.5.
CC ramstage/cpu/x86/smm/smm_module_loader.o
src/cpu/x86/smm/smm_module_loader.c:180:10: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
region_offset(&cpus[i].stub_code), i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/cpu/x86/smm/smm_module_loader.c:184:20: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
__func__, region_offset(&cpus[0].stub_code),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/cpu/x86/smm/smm_module_loader.c:185:10: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
region_offset(&cpus[i].stub_code), size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/cpu/x86/smm/smm_module_loader.c:349:52: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
printk(BIOS_DEBUG, "%-12s [0x%lx-0x%lx]\n", name, region_offset(®ion),
~~~ ^~~~~~~~~~~~~~~~~~~~~~
%zx
src/cpu/x86/smm/smm_module_loader.c:350:9: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
region_end(®ion));
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I59f20aacf91cb50fb194a84082a643b34c6c1ae5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65154
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It might be possible to have this used for more than x86, but that
will be for a later commit.
Change-Id: I4968364a95b5c69c21d3915d302d23e6f1ca182f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch provides an option to reload the microcode patch a.k.a
second microcode patch if SoC selects the required
RELOAD_MICROCODE_PATCH config.
There is a new feature requirement starting with ADL to re-load the
microcode patch as per new Mcheck initialization flow.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS. Able to re-load
microcode patch as below:
[INFO ] microcode: Re-load microcode patch
[INFO ] microcode: updated to revision 0x41b date=2022-03-08
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0a3c29b3c25fccd31280a2a5a8d4fb22a6cf53bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64833
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Use the common code to save data for fast boot or S3 resume.
An notable improvement that comes with this, is that the same 4K page
is not rewritten all the time. This prolongs the hardware's life.
TESTED on pcengines/apu1 and lenovo/g505s: S3 resume works fine.
Change-Id: I0f4f36dcead52a6c550fb5e606772e0a99029872
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44295
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Save the regular boot MTRRs that are restored on the S3 path during
the CPU init in cbmem instead of storing them to the SPI flash.
This was probably done because historically this code run with late
cbmem init (in ramstage).
TESTED on pcengines/apu1 and lenovo/g505s: S3 resume works fine.
Change-Id: Ia58e7cd1afb785ba0c379ba75ef6090b56cb9dc6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44294
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
We use a region later on so we might as well use a region from the
start. This simplifies the computations too.
Change-Id: Iffa36ccb89c36401d3856b24364216e83ca35f91
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64609
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This allows for some runtime checks on all SMM elements and removes
the need for manual checks.
We can drop completely separate codepaths on SMM_TSEG & SMM_ASEG as the
only difference is where permanent handler gets placed.
TESTED on prodrive/hermes and qemu with SSM_ASEG with 4 cores & SMM_TSEG
with 128 cores. This code figured out quite some problems with
overlapping regions so I think this is the right approach.
Change-Id: Ib7e2e3ae16c223ecfd8d5bce6ff6c17c53496925
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63602
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Some logging is superfluous and logging that code is being copied is
'SPEW' level.
Change-Id: I84d49a394cc53d78f1e1d3936502ac16810daf9f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When each AP needs to do a lot of printing 1 sec is not enough.
Change-Id: I00f0a49bf60f3915547924c34a62dd0044b0c918
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64828
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
|
|
Starting from Intel Pentium 4, cpus featured SSE2.
This will be used in the follow-up patches to determine whether to use
mfence as this instruction was introduced with the SSE2 feature set.
Change-Id: I8ce37d855cf84a9fb9fe9e18d77b0c19be261407
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Checking if the stack encroaches on the entry points is done in other
parts of the code.
Change-Id: I275d5dda9c69cc89608450ae27dd5dbd581e3595
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
