| Age | Commit message (Collapse) | Author |
|---|
|
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage
the same logic (to skip 2nd SIPI and reduce delay between
INIT and SIPI while perform AP initialization) even on
newer Intel platform.
Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I88f62c18b814ac0ddd356944359e727d6e3bba5a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
|
|
Selecting CPU_X86_CACHE_HELPER only added the x86_enable_cache wrapper
function around enable_cache which additionally wrote a POST code to
port 0x80 and printed a message to the console. This function was only
called during multi-processor initialization in ramstage via the init
function pointer in the CPU's device operations struct and was run on
all cores, so the message on the console was printed once per CPU core.
This patch replaces all x86_enable_cache calls by calls to enable_cache
and removes the wrapper function and the Kconfig symbol
CPU_X86_CACHE_HELPER which was used to only add this when the
corresponding CPUs used the x86_enable_cache wrapper function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I5866b6bf014821ff9e3a48052a5eaf69319b003a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58579
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since all x86 CPUs in tree have MTRR support, there is no need to guard
the DISPLAY_MTRRS option with HAVE_DISPLAY_MTRRS. Also all x86 CPUs/SoCs
have a display_mtrrs call at least somewhere in their code, so selecting
the DISPLAY_MTRRS option will always have an effect. All SoCs that don't
select RESET_VECTOR_IN_RAM have the postcar stage where it gets called.
The two AMD SoCs that select RESET_VECTOR_IN_RAM use the FSP2 driver
which contains plenty of display_mtrrs calls.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2894689ce58e7404d9d5a894f3c288bc4016ea19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
All x86 CPUs in the coreboot tree have a local APIC, so the
corresponding code can be unconditionally included in the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc354fb386977b0fca4caa72c03aa77a20bc348e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
With using a Kconfig option to add the x86 LAPIC support code to the
build, there's no need for adding the corresponding directory to subdirs
in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added
(cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding
MTRR code selection patch and having verified that all platforms
added the MTRR code on that patch shows that soc/example/min86 and
soc/intel/quark are the only platforms that don't end up selecting the
LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y
which gets overridden to n in the Kconfig of the two SoCs mentioned
above.
Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
There's no need for relative paths with Kconfig options.
Change-Id: Ib9b9b29a158c34a30480aaabf6d0b23819d28427
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
All x86-based CPUs and SoCs in the coreboot tree end up including the
Makefile in cpu/x86/mtrr, so include this directly in the Makefile in
cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new
x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is
selected be default could be added and the new CPU/SoC without MTRR
support can override this option that then will be used in the Makefile
to guard adding the Makefile from the cpu/x86/mtrr sub-directory.
In cpu/intel all models except model 2065X and 206AX are selcted by a
socket and rely on the socket's Makefile.inc to add x86/mtrr to the
subdirs, so those models don't add x86/mtrr themselves. The Intel
Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the
subdirs. The Intel Xeon SP SoC directory contains two sub-folders for
different versions or generations which both add x86/mtrr to the subdirs
in their Makefiles.
Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Each CPU/SoC checks the return value of the mp_init_with_smm and prints
the same error message if it wasn't successful, so move this check and
printk to mp_init_with_smm. For this the original mp_init_with_smm
function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm
function is created which then calls do_mp_init_with_smm, prints the
error if it didn't return CB_SUCCESS and passes the return value of
do_mp_init_with_smm to its caller.
Since no CPU/SoC code handles a mp_init_with_smm failure apart from
printing a message, also add a comment at the mp_init_with_smm call
sites that the code might want to handle a failure.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Using cb_err as return type of mp_run_on_aps, mp_run_on_all_aps,
mp_run_on_all_cpus and mp_park_aps clarifies the meaning of the
different return values. This patch also adds the types.h include that
provides the definition of the cb_err enum and checks the return value
of all 4 functions listed above against the enum values instead of
either checking if it's non-zero or less than zero to handle the error
case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b3f03415a041d3ec9cd0e102980e53868b004b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Using cb_err as return type clarifies the meaning of the different
return values. This patch also adds the types.h include that provides
the definition of the cb_err enum and checks the return value of
mp_init_with_smm against the enum values instead of either checking if
it's non-zero or less than zero to handle the error case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Using cb_err as return type clarifies the meaning of the different
return values. To not change the return types of mp_run_on_aps which is
exposed outside of this compilation unit to keep the scope of this patch
limited, the return value of run_ap_work gets translated to the int
values in mp_run_on_aps. This could also be done by a cast of the
run_ap_work return value to int, but an explicit translation of the
return values should be clearer about what it does there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id346c8edf06229a929b4783498d8c6774f54a8b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Using cb_err as return type clarifies the meaning of the different
return values. To not change the return types of mp_init_with_smm which
is exposed outside of this compilation unit to keep the scope of this
patch limited, the return value of mp_init gets translated to the int
values in mp_init_with_smm. This could also be done by a cast of the
mp_init return value to int, but an explicit translation of the return
values should be clearer about what it does there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4129c1db06a877c47cca87782af965b62dcbbdc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Using cb_err as return type clarifies the meaning of the different
return values. Also restructure the implementation of wait_for_aps to
not need a local timeout variable.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I86b8c8b0849ae130c78125b83d159147ce11914c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Using cb_err as return type clarifies the meaning of the different
return values. Also restructure the implementation of apic_wait_timeout
to not need a local timeout variable.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2fe32c761492d252b154d2f50f2a330cf4f412d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Using cb_err as return type clarifies the meaning of the different
return values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifb64b5908b938bb162153433e5f744ab0b95c525
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Using cb_err as return type clarifies the meaning of the different
return values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I95f36ba628c7f3ce960a8f3bda730d1c720253cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We now pre-populate cpu_info before jumping to the C handler. We no
longer need this parameter.
I moved the stack alignment closer to the actual invocation of the C
handler so it's easier to reason about.
BUG=b:194391185, b:179699789
TEST=Boot guybrush to OS and verify all CPUs still function
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8997683b6613b7031784cabf7039a400f0efdea1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This will reduce the number of AP init paths we need to support.
BUG=b:194391185, b:179699789
TEST=Boot guybrush to OS and see all CPUs initialized correctly
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I05beb591bd7b3a26b6c51c10d4ffd6f8621c12eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There are two possible code sections where the cpu_info macros can be
included: .code32 and .code64
Doing a `push %eax` while in a .code64 section will result in a compiler
error. This macro manually pushes the 32-bit register onto the stack so
we can share the code between 32 and 64 bit builds.
We also can't implicitly dereference per_cpu_segment_selector because
it's a 32-bit address. Trying to do this results in the following:
E: Invalid reloc type: 11
E: Illegal use of 32bit sign extended addressing at offset 0x1b2
If we load the address first, then dereference it, we can work around
the limitation.
With these fixes, 64-bit builds can now use CPU_INFO_V2.
BUG=b:179699789
TEST=Boot qemu 64 bit build with CPU_INFO_V2 and 4 CPUs. See AP init
work as expected.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4e72a808c9583bb2d0f697cbbd9cb9c0aa0ea2dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When CONFIG_X86_AMD_INIT_SIPI was set, the second/final SIPI that
afterwards checks if all APs have checked in was skipped and if it got
so far, start_aps returned CB_SUCCESS despite not having checked if all
APs had checked in after the SIPI. This patch makes start_aps skip the
first SIPI in the CONFIG_X86_AMD_INIT_SIPI case so we use the proper
timeouts and error handling for the final and this case only SIPI and
signal the caller an error when not all APs have checked in after the
SIPI.
A timeless build for lenovo/x230 which is a mainboard that doesn't
select X86_AMD_INIT_SIPI results in identical binary, so this doesn't
change the behavior of the !X86_AMD_INIT_SIPI case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I39438229497c5d9c44dc7e247c7b2c81252b4bdb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Using cb_err as return type clarifies the meaning of the different
return values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icb96f28b4d59b3d00638a43c927df80f5d1643f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58455
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since during AP startup it's not guaranteed that no AP console output
will be printed between consecutive printk calls in send_sipi_to_aps,
add a new line character to all printks to make sure to have the outputs
from the APs on separate lines. For consistency also add a final new
line character to the printk call in start_aps.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3983b8a0e6b272ba5fb2a90a108d17a0c480c8b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58454
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apart from the SIPI number in the debug message the two instances of the
SIPI sending code in start_aps are identical, so factor it out into a
new send_sipi_to_aps function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6a921b81fce77fbf58c7ae3b50efd8c3e6e5aef3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58453
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Using types.h as include instead of stddef.h and stdint.h will also
provide commonlib/bsd/cb_err.h which will be used in follow-up patches.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I08a68dc827d60c6c9a27b3ec8b74b9c8a2c96d12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58452
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The push/pop of %ebx was only added because smm_stub saves the canary
value in it. Now that we no longer use cpu_info in smm, we no longer
need to save the register.
BUG=b:179699789
TEST=Boot guybrush to the OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I554dbe016db8b1c61246c8ffc7fa252b2542ba92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Now that cpu_info() is no longer used by COOP_MULTITASKING, we no
longer need to set up cpu_info in SMM. When using CPU_INFO_V2, if
something does manage to call cpu_info() while executing in SMM mode,
the %gs segment is disabled, so it will generate an exception.
BUG=b:179699789
TEST=Boot guybrush to OS with threads enabled
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id64f32cc63082880a92dab6deb473431b2238cd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
We only ever start and execute threads on the BSP. By explicitly
checking to see if the CPU is the BSP we can remove the dependency on
cpu_info. With this change we can in theory enable threads in all
stages.
BUG=b:194391185, b:179699789
TEST=Boot guybrush to OS and verify coop multithreading still works
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iea4622d52c36d529e100b7ea55f32c334acfdf3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58199
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove code, which was only needed for B and C2 stepping
of P54C. The linux kernel source has commentary on X86_BUG_11AP:
* See if we have a good local APIC by checking for buggy Pentia,
* i.e. all B steppings and the C2 stepping of P54C when using their
* integrated APIC (see 11AP erratum in "Pentium Processor
* Specification Update")
Change-Id: Iec10335f603674bcef2e7494831cf11200795d38
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ExtINT is related to external PIC mode i8259 interrupts,
they should be delivered to one CPU (BSP) only.
Change-Id: I78490d2cbe3d9f52e10ef2471508263fd6c146ba
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The bits REMOTE_IRR and SEND_PENDING are documented as read-only,
and reserved bits should not be modified either.
Change-Id: I6bcb9eb990debe169340a0bfe662158b62a8f4dc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The bit LAPIC_SPIV_ENABLE returns 0 after reset even though
LAPIC has not been temporarily disabled.
Change-Id: Id261bc68fe9d1b1b0e5a3ef599a8f33a686d283b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Only the enable_lapic() part is required while doing
SMP init. Also disable_lapic() must not be called if
we rely on LAPIC for timer source.
Change-Id: Ib5e37c1a0a91fa4e9542141aa74f1c1876fee94e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
There is currently a fundamental flaw in the current cpu_info()
implementation. It assumes that current stack is CONFIG_STACK_SIZE
aligned. This assumption breaks down when performing SMM relocation.
The first step in performing SMM relocation is changing the SMBASE. This
is accomplished by installing the smmstub at 0x00038000, which is the
default SMM entry point. The stub is configured to set up a new stack
with the size of 1 KiB (CONFIG_SMM_STUB_STACK_SIZE), and an entry point
of smm_do_relocation located in RAMSTAGE RAM.
This means that when smm_do_relocation is executed, it is running in SMM
with a different sized stack. When cpu_info() gets called it will be
using CONFIG_STACK_SIZE to calculate the location of the cpu_info
struct. This results in reading random memory. Since cpu_info() has to
run in multiple environments, we can't use a compile time constant to
locate the cpu_info struct.
This CL introduces a new way of locating cpu_info. It uses a per-cpu
segment descriptor that points to a per-cpu segment that is allocated on
the stack. By using a segment descriptor to point to the per-cpu data,
we no longer need to calculate the location of the cpu_info struct. This
has the following advantages:
* Stacks no longer need to be CONFIG_STACK_SIZE aligned.
* Accessing an unconfigured segment will result in an exception. This
ensures no one can call cpu_info() from an unsupported environment.
* Segment selectors are cleared when entering SMM and restored when
leaving SMM.
* There is a 1:1 mapping between cpu and cpu_info. When using
COOP_MULTITASKING, a new cpu_info is currently allocated at the top of
each thread's stack. This no longer needs to happen.
This CL guards most of the code with CONFIG(CPU_INFO_V2). I did this so
reviewers can feel more comfortable knowing most of the CL is a no-op. I
would eventually like to remove most of the guards though.
This CL does not touch the LEGACY_SMP_INIT code path. I don't have any
way of testing it.
The %gs segment was chosen over the %fs segment because it's what the
linux kernel uses for per-cpu data in x86_64 mode.
BUG=b:194391185, b:179699789
TEST=Boot guybrush with CPU_INFO_V2 and verify BSP and APs have correct
%gs segment. Verify cpu_info looks sane. Verify booting to the OS
works correctly with COOP_MULTITASKING enabled.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I79dce9597cb784acb39a96897fb3c2f2973bfd98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
These issues were found and fixed by codespell, a useful tool for
finding spelling errors.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I5b8ecdfe75d99028fee820a2034466a8ad1c5e63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58080
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The %fs and %gs segment are typically used to implement thread local
storage or cpu local storage. We don't currently use these in coreboot,
so there is no reason to map them. By setting the segment index to 0,
it disables the segment. If an instruction tries to read from one of
these segments an exception will be raised.
The end goal is to make cpu_info() use the %gs segment. This will remove
the stack alignment requirements and fix smm_do_relocation.
BUG=b:194391185, b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaa376e562acc6bd1dfffb7a23bdec82aa474c1d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This will help reduce duplication and make it easier to add new members
to the cpu_info struct.
BUG=b:194391185, b:179699789
TEST=Compare assembly of romstage and ramstage before and after
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I31f264f4bb8b605fa3cb3bfff0d9bf79224072aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic182d7c551932ab6917a81568490ed18acdcd597
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57927
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It took me a while to understand the SMM set up flow. This adds a
clarifying comment.
BUG=b:194391185, b:179699789
TEST=None
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9c73e416b8c583cf870e7a29b0bd7dcc99c2f5f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The code under `cpu/x86/tsc` is only compiled in when its `Makefile.inc`
is included from platform (CPU/SoC) code and the `UDELAY_TSC` Kconfig
option is enabled.
Include `cpu/x86/tsc/Makefile.inc` once from `cpu/x86/Makefile.inc` and
drop the now-redundant inclusions from platform code. Also, deduplicate
the `UDELAY_TSC` guards.
Change-Id: I41e96026f37f19de954fd5985b92a08cb97876c1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57456
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures mp_run_on_all_aps() is passing 'MP_RUN_ON_ALL_CPUS'
macro rather hardcoding `0` while running `func` on all APs.
Change-Id: Icd34371c0d4349e1eefe945958eda957c4794707
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Since current AMD SoCs don't need some wait time between INIT and SIPI,
we can skip the 10ms wait there, which improves the boot time a bit.
before: CPU_CLUSTER: 0 init finished in 632 msecs
after: CPU_CLUSTER: 0 init finished in 619 msecs
mpinit still works on Mandolin and all CPU cores show up and are usable.
This also doesn't change the binary in a timeless build for boards/SoCs
that don't select X86_AMD_INIT_SIPI which I verified for lenovo/x230.
BUG=b:193885336
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1e044776f45021742a88a5e369a74383c1baaab6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The alignment for `struct cpu_info` is wrong on x86_64. c_start.S uses
the `push` instruction when setting up the cpu_info struct. This
instruction will push 8 bytes but `unsigned int` is 4 bytes. By making
it a `size_t` we get the correct size for both x86_32 and x86_64.
BUG=b:179699789
TEST=Boot guybrush to the OS
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8ef311aaa8333ccf8a5b3f1f0e852bb26777671c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Tested on Intel Sandybridge x86_64 and x86_32.
Change-Id: I152483d24af0512c0ee4fbbe8931b7312e487ac6
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Expand NO_EARLY_BOOTBLOCK_POSTCODES to all of the early assembly code in
bootblock.
BUG=b:191370340
TEST: Build with & without the option enabled
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Idb4a96820d5c391fc17a0f0dcccd519d4881b78c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This commit adds a method called `mainboard_smi_finalize` which provides
a mechanism for a mainboard to execute some code as part of the finalize
method in the SMM stage before SoC does its finalization.
BUG=b:191189275
BRANCH=None
TEST=Implement `mainboard_smi_finalize` on lalala and verify that the
code executes in SMM.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: If1ee63431e3c2a5831a4656c3a361229acff3f42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Trigger mode LAPIC_INT_LEVELTRIG was only used with LAPIC_DM_INIT,
specifically for (obsolete) Init Level De-assert.
Level LAPIC_INT_ASSERT is required to be set for all other delivery
modes other than LAPIC_DM_INIT.
This reverts the two above changes that X2APIC mode support introduced
to the IPI for LAPIC_DM_SMI.
Change-Id: I7264f39143cc6edb7a9687d0bd763cb2703a8265
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In x86_64 code every function call consumes 32byte of stack with
no stack local variables being used. That limits the function call depth
in SMM to 32 or less.
Double the stack size to prevent overwriting the stack canary as seen
on HP8200 and x86_64 enabled.
Change-Id: Iee202ba2ae609a474d0eb3b06f49690f33f4eda8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This fixes a hard to debug hang that could occur in any stage, but in
the end it follows simple rules and is easy to fix.
In long mode the 32bit displacement addressing used on 'mov' and 'lea'
instructions is sign-extended. Those instructions can be found using
readelf on the stage and searching for relocation type R_X86_64_32S.
The sign extension is no issue when either running in protected mode or
the code module and thus the address is below 2GiB. If the address is
greater than 2GiB, as usually the case for code in TSEG, the higher
address bits [64:32] are all set to 1 and the effective address is
pointing to memory not paged. Accessing this memory will cause a page
fault, which isn't handled either.
To prevent such problems
- disable R_AMD64_32S relocations in rmodtool
- add comment explaining why it's not allowed
- use the pseudo op movabs, which doesn't use 32bit displacement addressing
- Print a useful error message if such a reloc is present in the code
Fixes a crash in TSEG and when in long mode seen on Intel Sandybridge.
Change-Id: Ia5f5a9cde7c325f67b12e3a8e9a76283cc3870a3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Note that there are assumptions about LAPIC MMIO location
in both AMD and Intel sources in coreboot proper.
Change-Id: I2c668f5f9b93d170351c00d77d003c230900e0b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55194
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia3935524e57885ca79586f1f4612020bb05956ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Function is needed with PARALLEL_MP and excluding guard will
be added to the source file.
The incompatibilities with X2APIC_SUPPORT have been fixed
so the exclusion is removed here too.
Change-Id: I5696da4dfe98579a3b37a027966b6758f22574aa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib9c404cb55b96dcc5639287c214c5c8f468c0529
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55192
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ife127d6dc8241cccb9d52236a9152da707f0e261
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55191
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7207a9aadd987b4307ce8b3dd8dbfd47d0a5768e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55190
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
They are not __always_inline and specially enable_lapic()
will become more complex to support X2APIC state changes.
Change-Id: Ic180fa8b36e419aba07e1754d4bf48c9dfddb2f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55258
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I57c5d85d3098f9d59f26f427fe16829e4e769194
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55187
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allows compile-time optimisation on platforms that do not wish
to enable runtime checking of X2APIC.
Legacy lapic_cpu_init() is incompatible so there is dependency
on PARALLEL_MP. Also stop_this_cpu() is incompatible, so there
is dependency on !AP_IN_SIPI_WAIT.
Since the code actually lacks enablement of X2APIC (apparently
assuming the blob has done it) and the other small flaws pointed
out in earlier reviews, X2APIC_RUNTIME is not selected per
default on any platform yet.
Change-Id: I8269f9639ee3e89a2c2b4178d266ba2dac46db3f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
For the purpose of LAPIC IPI messaging it is not required to
evaluate if IOAPIC is enabled. The necessary enable_lapic()
will still be called as part of setup_lapic() within cpu init.
Change-Id: I8b6a34e39f755452f0af63ae0ced7279747c28fc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I7e42519d5bcee95970d366fd64923de874098172
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55189
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is for the !PARALLEL_MP paths.
Change-Id: If4b91834a1b6de2a902ab914610ab76c1423f1e9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55188
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It was not used, platforms should move away from LEGACY_SMP_INIT
instead of maintaining this.
Change-Id: Id89ec4bb0bdc056ac328f31397e4fab02742e444
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ibe2c24228045cbf1ed2a6b0cb0a67848cbf03019
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55203
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9833c4f6c43b3e67f95bd465c42d7a5036dff914
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The 64-bit compiler x86_64-linux-gnu-gcc-10 aborts the build with the
format warning below:
CC ramstage/cpu/x86/smm/smm_module_loader.o
src/cpu/x86/smm/smm_module_loader.c:415:42: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'u32' {aka 'unsigned int'} [-Werror=format=]
415 | printk(BIOS_DEBUG, "%s: stack_end = 0x%lx\n",
| ~~^
| |
| long unsigned int
| %x
416 | __func__, stub_params->stack_top - total_stack_size);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| u32 {aka unsigned int}
The size of `size_t` differs between i386-elf (32-bit) and
x86_64-elf/x86_64-linux-gnu (64-bit).
Unfortunately, coreboot hardcodes
src/include/inttypes.h:#define PRIx32 "x"
so `PRIx32` cannot be used.
There use `z` as length modifier, as size_t should be always big enough
to hold the value.
Found-by: x86_64-linux-gnu-gcc-10 (Debian 10.2.1-6) 10.2.1 20210110
Fixes: afb7a814 ("cpu/x86/smm: Introduce SMM module loader version 2")
Change-Id: Ib504bc5e5b19f62d4702b7f485522a2ee3d26685
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The 64-bit compiler x86_64-linux-gnu-gcc-10 aborts the build with the
format warning below:
CC ramstage/cpu/x86/smm/smm_module_loader.o
src/cpu/x86/smm/smm_module_loader.c: In function 'smm_module_setup_stub':
src/cpu/x86/smm/smm_module_loader.c:360:70: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Werror=format=]
360 | printk(BIOS_ERR, "%s: state save size: %zx : smm_entry_offset -> %lx\n",
| ~~^
| |
| long unsigned int
| %x
As `size_t` is defined as `long unsigned int` in i386-elf (32-bit), the
length modifier `l` matches there. With x86_64-elf/x86_64-linux-gnu
(64-bit) and `-m32` `size_t` is defined as `unsigned int` resulting in a
type mismatch. So, use the correct length modifier `z` for the type
`size_t`.
Found-by: x86_64-linux-gnu-gcc-10 (Debian 10.2.1-6) 10.2.1 20210110
Fixes: afb7a814 ("cpu/x86/smm: Introduce SMM module loader version 2")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Change-Id: I4172e0f4dc40437250da89b7720a5c1e5fbab709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The 64-bit compiler x86_64-linux-gnu-gcc-10 aborts the build with the
format warning below:
CC ramstage/cpu/x86/smm/smm_module_loader.o
src/cpu/x86/smm/smm_module_loader.c: In function 'smm_create_map':
src/cpu/x86/smm/smm_module_loader.c:146:19: error: format '%zx' expects argument of type 'size_t', but argument 3 has type 'uintptr_t' {aka 'long unsigned int'} [-Werror=format=]
146 | " smbase %zx entry %zx\n",
| ~~^
| |
| unsigned int
| %lx
147 | cpus[i].smbase, cpus[i].entry);
| ~~~~~~~~~~~~~~
| |
| uintptr_t {aka long unsigned int}
In coreboot `uintptr_t` is defined in `src/include/stdint.h`:
typedef unsigned long uintptr_t;
As `size_t` is defined as `long unsigned int` in i386-elf (32-bit), the
length modifier `z` matches there. With x86_64-elf/x86_64-linux-gnu
(64-bit) and `-m32` `size_t` is defined as `unsigned int` resulting in a
type mismatch. Normally, `PRIxPTR` would need to be used as a length
modifier, but as coreboot always defines `uintptr_t` to `unsigned long`
(and in `src/include/inttypes.h` also defines `PRIxPTR` as `"lx"`), use
the length modifier `l` to make the code more readable.
Found-by: x86_64-linux-gnu-gcc-10 (Debian 10.2.1-6) 10.2.1 20210110
Fixes: afb7a814 ("cpu/x86/smm: Introduce SMM module loader version 2")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Change-Id: I32bff397c8a033fe34390e6c1a7dfe773707a4e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Intel CBnT (and Boot Guard) makes the chain of trust TOCTOU safe by
setting up NEM (non eviction mode) in the ACM. The CBnT IBB (Initial
BootBlock) therefore should not disable caching.
Sidenote: the MSR macros are taken from the slimbootloader project.
TESTED: ocp/Deltalake boot with and without CBnT and also a broken
CBnT setup.
Change-Id: Id2031e4e406655e14198e45f137ba152f8b6f567
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
This removes the need to include this code separately on each
platform.
Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I28f262078cf7f5ec4ed707639e845710a8cc56ea
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fix booting issues on google/kahlee introduced by CB:51723.
Update use inital apic id in smm_stub.S to support xapic mode error.
Check more bits(LAPIC_BASE_MSR BIT10 and BIT11) for x2apic mode.
TEST=Boot to OS and check apicid, debug log for CPUIDs
cpuid_ebx(1), cpuid_ext(0xb, 0), cpuid_edx(0xb) etc
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ia28f60a077182c3753f6ba9fbdd141f951d39b37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch removes a call to console_init() and debug print message since
the code is not thread safe. This prevents system hangs (soft hangs)
while in SMM if user drops in a new SOC with more cores or another
socket or as a result of bad configuration. Console is already
initialized after the lock has been acquired so this does not affect any
other functionality.
Tested on DeltaLake mainboard with SMM enabled and 52 CPU threads.
Change-Id: I7e8af35d1cde78b327144b6a9da528ae7870e874
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some platforms which have large amounts of RAM and also write-combining
regions may decide to drop the WC regions in favor of the default when
preserving MTRRs for the OS. From a data safety perspective, this is
safe to do, but if, say, the graphics framebuffer is the region that is
changed from WC to UC/WB, then the performance of writing to the
framebuffer will decrease dramatically.
Modern OSes typically use Page Attribute Tables (PAT) to determine the
cacheability on a page level and usually do not touch the MTRRs. Thus,
it is believed to be safe to stop reserving MTRRs for the OS, in
general; PentiumII is the exception here in that OSes that still
support that may still require MTRRs to be available. In any case, if
the OS wants to reprogram all of the MTRRs, it is of course still free
to do so (after consulting the e820 table).
BUG=b:185452338
TEST=Verify MTRR programming on a brya (where `sa_add_dram_resources`
was faked to think it had 32 GiB of DRAM installed) and variable MTRR
map includes a WC entry for the framebuffer (and all the RAM):
MTRR: default type WB/UC MTRR counts: 13/9.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x00003fff80000000 type 6
MTRR: 1 base 0x0000000077000000 mask 0x00003fffff000000 type 0
MTRR: 2 base 0x0000000078000000 mask 0x00003ffff8000000 type 0
MTRR: 3 base 0x0000000090000000 mask 0x00003ffff0000000 type 1
MTRR: 4 base 0x0000000100000000 mask 0x00003fff00000000 type 6
MTRR: 5 base 0x0000000200000000 mask 0x00003ffe00000000 type 6
MTRR: 6 base 0x0000000400000000 mask 0x00003ffc00000000 type 6
MTRR: 7 base 0x0000000800000000 mask 0x00003fff80000000 type 6
MTRR: 8 base 0x000000087fc00000 mask 0x00003fffffc00000 type 0
ADL has 9 variable-range MTRRs, previously 8 of them were used, and
there was no separate entry for the framebuffer, thus leaving the
default MTRR in place of uncached.
Change-Id: I2ae2851248c95fd516627b101ebcb36ec59c29c3
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Coverity detects the control flow UNREACHABLE issue for the printk
usage. This change adds rc to keep the smm_module_setup_stub function
call and returns rc after printk usage.
Found-by: Coverity CID 1452602
TEST=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ie3b90a8197c3b84c5a1dbca8a9ef566bef35c9ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52574
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As v1 was dropped, rename v2.
Change-Id: I4dd51804e9391284c7624c42ad8180a14b1a4c84
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I536a104428ae86e82977f2510b9e76715398b442
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use the same stack location during relocation as for the permanent
handler.
When the number of CPUs is too large the stacks during relocation
don't fit inside the default SMRAM segment at 0x30000. Currently the
code would just let the CPU stack base grow downwards outside of the
default SMM segment which would corrupt lower memory if S3 is
implemented.
Also update the comment on smm_module_setup_stub().
Change-Id: I6a0a890e8b1c2408301564c22772032cfee4d296
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Implement x2apic mode as existing code only supports apic mode.
Use info from LAPIC_BASE_MSR (LAPIC_BASE_MSR_X2APIC_MODE) to check
if apic mode or x2apic mode and implement x2apic mode according to
x2apic specfication.
Reference:
https://software.intel.com/content/www/us/en/develop/download/intel-64-architecture-x2apic-specification.html
BUG=None
BRANCH=None
TEST=boot to OS and check apic mode
cat /proc/cpuinfo | grep "apicid"
ex) can see apicid bigger than 255
apicid : 256
apicid : 260
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I0bb729b0521fb9dc38b7981014755daeaf9ca817
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51723
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes an issue introduced in
commit ad0116c0327f575f0af184a2f4861848a49a0e2a
cpu/x86/smm_loaderv2: Remove unused variables
It removed one variable that was needed to set the SMM start address
that is used to set the SMM stack location.
Change-Id: Iddf9f204db54f0d97a90bb423b65db2f7625217f
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51721
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If67bcbf0c8ffbd041e2e4cab8496f4634de26552
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Global variables are located in .bss and not on the CPU stack.
Overwriting them a per CPU case is bound to cause race conditions. In
this case it is even just plainly wrong.
Note: This variable is set up in the get_smm_info() function.
Change-Id: Iaef26fa996f7e30b6e4c4941683026b8a29a5fd1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The argument provided to the function was always the same as the one
computed inside the function so drop the argument.
Change-Id: I14abf400dce1bd9b03e401b6619a0500a650fa0e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The permanent handler module argument 'save_state_size' now holds the
meaning of the real save state size which is then substracted from the
CPUs save state 'top' to get the save state base.
TESTED with qemu Q35 on x86_64 where the stub size exceeds the AMD64
save state size.
Change-Id: I55d7611a17b6d0a39aee1c56318539232a9bb781
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove variables that are either constants or are just assigned but
not used.
Change-Id: I5d291a3464f30fc5d9f4b7233bde575010275973
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6648d0710bc0ba71cfbaaf4db7a8c1f33bbc9b35
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
With the smm_module_loaderv2 the save state map is not linear so copy
a map from ramstage into the smihandler.
TESTED on QEMU q35: Both SMMLOADER V1 and V2 handle save states properly.
Change-Id: I31c57b59559ad4ee98500d83969424e5345881ee
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move out smm_create_map as this was not run if concurrent_save_states
is 1. The cpus struct array is used in the smm_get_cpu_smbase()
callback so it is necessary to create this.
TEST: run qemu/q35 with -smp 1 (or no -smp argument)
Change-Id: I07a98bbc9ff6dce548171ee6cd0c303db94087aa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50783
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The parameters that the permanent handler requires are pushed directly
to the permanent handlers relocatable module params.
The paremeters that the relocation handler requires are not passed on
via arguments but are copied inside the ramstage. This is ok as the
relocation handler calls into ramstage.
Change-Id: Ice311d05e2eb0e95122312511d83683d7f0dee58
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
struct smm_loader_params is a struct that is passed around in the
ramstage code to set up either the relocation handler or the permanent
handler. At the moment no parameters in the stub 'smm_runtime' are
referenced so it can be dropped. The purpose is to drop the
smm_runtime struct from the stub as it is already located in the
permanent handler.
Change-Id: I09c1b649b5991f55b5ccf57f22e4a3ad4c9e4f03
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Keep a copy of start32_offset into ramstage to avoid needing to pass
arguments, calling from assembly. Doing this in C code is better than
assembly.
Change-Id: Iac04358e377026f45293bbee03e30d792df407fd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50765
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of passing on parameters from the stub to the permanent
handler, add them directly to the permanent handler.
The parameters in the stub will be removed in a later patch.
Change-Id: Ib3bde78dd9e0c02dd1d86e03665fa9c65e3d07eb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The data needed to compute the permanent smbase for a core, when
relocating, is present in the ramstage data which the stub located at
DEFAULT_SMBASE (0x30000) calls back to. There is no need to fetch this
from via the stub params.
Change-Id: I3894c39ec8cae3ecc46b469a0fdddcad2a8f26c4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50763
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is only consumed by the stub and not by the relocation handler or
the permanent handler, so move it out of the runtime struct.
Change-Id: I01ed0a412c23c8a82d88408be058a27e55d0dc4d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I15b433483c36cce04816e8895789997d91702484
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These stub params need to be synced with the code in smm_stub.S and
are consumed by both the smmloader and smmloader_v2. So it is better
to have the definition located in one place.
Change-Id: Ide3e0cb6dea3359fa9ae660eab627499832817c9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50761
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In pursuit of the eventual goal of removing cbfs_boot_locate() (and
direct rdev access) from CBFS APIs, this patch replaces all remaining
"simple" uses of the function call that can easily be replaced by the
newer APIs (like cbfs_load() or cbfs_map()). Some cases of
cbfs_boot_locate() remain that will be more complicated to solve.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Icd0f21e2fa49c7cc834523578b7b45b5482cb1a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since prog_locate() was eliminated, prog_rdev() only ever represents the
loaded program in memory now. Using the rdev API for this is unnecessary
if we know that the "device" is always just memory. This patch changes
it to be represented by a simple pointer and size. Since some code still
really wants this to be an rdev, introduce a prog_chain_rdev() helper to
translate back to that if necessary.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If7c0f1c5698fa0c326e23c553ea0fe928b25d202
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a helper function mp_run_on_all_aps, it allows running a given
func on all APs excluding the BSP, with an added provision to run
func in serial manner per AP.
BUG=b:169114674
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I74ee8168eb6380e346590f2575350e0a6b73856e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51271
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Generated with a variant of
https://coccinelle.gitlabpages.inria.fr/website/rules/array.cocci
Change-Id: I083704fd48faeb6c67bba3367fbcfe554a9f7c66
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50594
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also sort includes alphabetically.
Change-Id: I49615434b140601ce599b4a63aa42c82874bd0f7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44315
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
