summaryrefslogtreecommitdiff
path: root/src/cpu/x86
AgeCommit message (Collapse)Author
2014-03-07x86: add MIRROR_PAYLOAD_TO_RAM_BEFORE_LOADING optionAaron Durbin
Boot speeds can be sped up by mirroring the payload into main memory before doing the actual loading. Systems that would benefit from this are typically Intel ones whose SPI are memory mapped. Without the SPI being cached all accesses to the payload in SPI while being loaded result in uncacheable accesses. Instead take advantage of the on-board SPI controller which has an internal cache and prefetcher by copying 64-byte cachelines using 32-bit word copies. Change-Id: I4aac856b1b5130fa2d68a6c45a96cfeead472a52 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5305 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04SMM: Only have console with DEBUG_SMIKyösti Mälkki
Existing code compiled serial communication and printk() for SMM even when DEBUG_SMI was not selected. Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5142 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-03-04uart8250mem: Unify calls with generic UARTKyösti Mälkki
NOTE: UART base for SMM continues to be broken, as it does not use the address resource allocator has assigned. Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250io: Unify calls with generic UARTKyösti Mälkki
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-25Remove CACHE_ROM.Vladimir Serbinenko
With the recent improvement 3d6ffe76f8a505c2dff5d5c6146da3d63dad6e82, speedup by CACHE_ROM is reduced a lot. On the other hand this makes coreboot run out of MTRRs depending on system configuration, hence screwing up I/O access and cache coherency in worst cases. CACHE_ROM requires the user to sanity check their boot output because the feature is brittle. The working configuration is dependent on I/O hole size, ram size, and chipset. Because of this the current implementation can leave a system configured in an inconsistent state leading to unexpected results such as poor performance and/or inconsistent cache-coherency Remove this as a buggy feature until we figure out how to do it properly if necessary. Change-Id: I858d78a907bf042fcc21fdf7a2bf899e9f6b591d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5146 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-24CAR_GLOBAL: enforce compiler to check if _start != _endEdward O'Callaghan
There are some fun rules C compilers can use to optimize their code. One of them is the assumption that two symbols point to two different addresses. In this case this wasn't true, resulting in unintended code execution (and later, a crash) with a clang build. Change-Id: I1496b22e1d1869ed0610e321b6ec6a83252e9d8b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4719 Tested-by: build bot (Jenkins)
2014-02-20SMM: Fixes for DEBUG_SMIKyösti Mälkki
Get the required UART includes directly. The ne2k part is old copy-paste leftover. Change-Id: Ifd9253abb5a50b515887459faf06b63f907eeda9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5258 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-19x86 bootblock: improve clang compatibilityPatrick Georgi
Its linker doesn't like "." arithmetics, so use .org, while its assembler doesn't like data32 prefixes. Change-Id: I3f5bbb350493d6510b8013df15d44c44c5db63c7 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4714 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-02-16x86: provide infrastructure to backup default SMM regionAaron Durbin
Certain CPUs require the default SMM region to be backed up on resume after a suspend. The reason is that in order to relocate the SMM region the default SMM region has to be used. As coreboot is unaware of how that memory is used it needs to be backed up. Therefore provide a common method for doing this. Change-Id: I65fe1317dc0b2203cb29118564fdba995770ffea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5216 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-11SMP: Add arch-agnostic boot_cpu()Kyösti Mälkki
We should not have x86 specific includes in lib/. Change-Id: I18fa9c8017d65c166ffd465038d71f35b30d6f3d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5156 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-09mtrr: only add prefetchable resources as WRCOMB for VGA devicesAaron Durbin
Be more conservative and only add VGA devices' prefetchable resources as write-combining in the address space. Previously all prefetchable memory was added as a write-combining memory type. Some hardware incorrectly advertises its BAR as prefetchable when it shouldn't be. A new memranges_add_resources_filter() function is added to provide additional filtering on device and resource. Change-Id: I3fc55b90d8c5b694c5aa9e2f34db1b4ef845ce10 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5169 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2014-02-06MTRR: Mark all prefetchable resources as WRCOMB.Vladimir Serbinenko
Change-Id: I2ecfd9733b65b6160bc2232d22db7b16692a847f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5149 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-06mtrr: retry fitting w/o WRCOMB if usage exceeds BIOS allocationAaron Durbin
If the MTRR usage exceeds the BIOS allocation for MTRR usage re-try without the WRCOMB type. Change-Id: Ie70ce84994428ff6700c36310264c3c44d9ed128 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5151 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2014-01-30x86: Add SMM helper functions to MP infrastructureAaron Durbin
In order for the cpu code to start SMM relocation 2 new functions are added to be shared: - void smm_initiate_relocation_parallel() - void smm_initiate_relocation() The both initiate an SMI on the currently running cpu. The 2 variants allow for parallel relocation or serialized relocation. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted rambi using these functions. Change-Id: I325777bac27e9a0efc3f54f7223c38310604c5a2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173982 Reviewed-on: http://review.coreboot.org/4891 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-01-30x86: parallel MP initializationAaron Durbin
Provide a common entry point for bringing up the APs in parallel. This work is based off of the Haswell one which can be moved over to this in the future. The APs are brought up and have the BSP's MTRRs duplicated in their own MTRRs. Additionally, Microcode is loaded before enabling caching. However, the current microcode loading support assumes Intel's mechanism. The infrastructure provides a notion of a flight plan for the BSP and APs. This allows for flexibility in the order of operations for a given architecture/chip without providing any specific policy. Therefore, the chipset caller can provide the order that is required. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted on rambi with baytrail specific patches. Change-Id: I0539047a1b24c13ef278695737cdba3b9344c820 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173703 Reviewed-on: http://review.coreboot.org/4888 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-01-28x86: add common definitions for control registersAaron Durbin
The access to control registers were scattered about. Provide a single header file to provide the correct access function and definitions. BUG=chrome-os-partner:22991 BRANCH=None TEST=Built and booted using this infrastructure. Also objdump'd the assembly to ensure consistency (objdump -d -r -S | grep xmm). Change-Id: Iff7a043e4e5ba930a6a77f968f1fcc14784214e9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172641 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4873 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-26src/cpu: Fix spelling of MTTR to MTRRPaul Menzel
Change-Id: Ia4718ac31a5b2bd12f8cda5e107aa878d74d2a03 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4805 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-15Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRRKyösti Mälkki
This change allows Kconfig options ROM_SIZE and CBFS_SIZE to be set with values that are not power of 2. The region programmed as WB cacheable will include all of ROM_SIZE. Side-effects to consider: Memory region below flash may be tagged WRPROT cacheable. As an example, with ROM_SIZE of 12 MB, CACHE_ROM_SIZE would be 16 MB. Since this can overlap CAR, we add an explicit test and fail on compile should this happen. To work around this problem, one needs to use CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig and define a smaller region for WB cache. With this change flash regions outside CBFS are also tagged WRPROT cacheable. This covers IFD and ME and sections ChromeOS may use. Change-Id: I5e577900ff7e91606bef6d80033caaed721ce4bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4625 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2013-12-26AMD boards (non-AGESA): Cleanup earlymtrr.c includesKyösti Mälkki
Change-Id: I5f4bf9dbaf3470dc83d3e980bb6cab10801e15c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4523 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-12-04Update SMM for FSP systemsMarc Jones
Add the FSP northbridge and southbridge includes. Change-Id: I5c7f395dc033caa8d0bf0313382769595d77f2a5 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4019 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-25Support for nehalem northbridgeVladimir Serbinenko
Including raminit Change-Id: If1dd3855181481b8b928adf0fdb40b29d15897db Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4044 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25Support for Ibexpeak southbridgeVladimir Serbinenko
Part of X201 port. Change-Id: If17d707004aba9f08459dbd8f3a146fa3c076aa9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4052 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
With the LynxPoint chipset there are more than 16 possible GPIOs that can trigger an SMI so we need a mainboard handler that can support this. There are only a handful of users of this function so just change them all to use the new prototype. Change-Id: I3d96da0397d6584f713fcf6003054b25c1c92939 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49530 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4145 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-22Don't wait on 2065xVladimir Serbinenko
The mdelay is not necessarry on 2065x. Tested on X201 that it works without delay. Change-Id: Ida9e85be7c214f3ba4c9476b5d8a0351e7980e5e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4083 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-13Rename cpu/x86/car.h to arch/early_variables.hStefan Reinauer
and add an ARMv7 version. Change-Id: I14fbff88d7c2b003dde57a19bf0ba9640d322156 Signed-off-by: Stefan Reinauer <reinauer@google.com> [km: rebased fa004acf8 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3939 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-10-03cpu/x86/mtrr/mtrr.c: Remove superfluous assignment to `type_index`Paul Menzel
When building coreboot with the Clang static analyzer scan-build, it reports »Value stored to 'type_index' is never read«. Indeed, in `memranges_each_entry()` `type_index` is assigned a value before being read. So remove that line. Change-Id: I6da2fb8be7157bb98c57281babd4a08ca0d9f7a7 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3953 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-23usbdebug: Do not support logging from SMMKyösti Mälkki
Letting SMI handler touch EHCI controller is an excellent source of USB problems. Remove usbdebug entirely from SMM. It may be possible to make usbdebug console work from SMM after hard work and coordination with payloads and even OS drivers. But we are not there. Change-Id: Id50586758ee06e8d76e682dc6f64f756ab5b79f5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3858 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-07-22X86: make the SIPI num_starts a config variableRonald G. Minnich
The code to figure out how to set num_starts was starting to get kludgy. It's a constant for a given CPU; constants should be constant; make it a config variable. This change includes an example of how to override it. Build but not boot tested; drivers welcome. Change-Id: Iddd906a707bb16251615c7b42f2bfb5a044379b4 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3796 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-07-11cpu: Fix spellingMartin Roth
Change-Id: I69c46648de0689e9bed84c7726906024ad65e769 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-22Do CAR variable migration only onceAaron Durbin
Non-S3 resume paths of sandy/ivybridge call cbmem_initialize() more than once. Doing car_migrate_variables() more than twice caused at least loss of some lines in CBMEM console. Change-Id: Idd14aba9384984aa3a7d38937a4b3572aa5dc088 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3512 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-13Revert "Add support for Intel Ibex Peak (Mobile 5) southbridge"Stefan Reinauer
This reverts commit 0210119b4b95e84f954cfd6dc11aafbc187421af Change-Id: I5be3f2a54394c592650a0dcd671e4a72ae796cb2 Reviewed-on: http://review.coreboot.org/3443 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-12Add support for Intel Ibex Peak (Mobile 5) southbridgeStefan Reinauer
Change-Id: If56f2cacc5f1b2ef9c7b6aea508d458a43dd1309 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3397 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-16x86: add cache-as-ram migration optionAaron Durbin
There are some boards that do a significant amount of work after cache-as-ram is torn down but before ramstage is loaded. For example, using vboot to verify the ramstage is one such operation. However, there are pieces of code that are executed that reference global variables that are linked in the cache-as-ram region. If those variables are referenced after cache-as-ram is torn down then the values observed will most likely be incorrect. Therefore provide a Kconfig option to select cache-as-ram migration to memory using cbmem. This option is named CAR_MIGRATION. When enabled, the address of cache-as-ram variables may be obtained dynamically. Additionally, when cache-as-ram migration occurs the cache-as-ram data region for global variables is copied into cbmem. There are also automatic callbacks for other modules to perform their own migration, if necessary. Change-Id: I2e77219647c2bd2b1aa845b262be3b2543f1fcb7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3232 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-14x86: add thread supportAaron Durbin
Thread support is added for the x86 architecture. Both the local apic and the tsc udelay() functions have a call to thread_yield_microseconds() so as to provide an opportunity to run pending threads. Change-Id: Ie39b9eb565eb189676c06645bdf2a8720fe0636a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3207 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-07x86: harden tsc udelay() functionAaron Durbin
Since the TSC udelay() function can be used in SMM that means the TSC can count up to whatever value. The current loop was not handling TSC rollover properly. In most cases this should not matter as the TSC typically starts ticking at value 0, and it would take a very long time to roll it over. However, it is my understanding that this behavior is not guaranteed. Theoretically the TSC could start or be be written to with a large value that would cause the rollover. Change-Id: I2f11a5bc4f27d5543e74f8224811fa91e4a55484 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3171 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-07x86: add TSC_CONSTANT_RATE optionAaron Durbin
Some boards use the local apic for udelay(), but they also provide their own implementation of udelay() for SMM. The reason for using the local apic for udelay() in ramstage is to not have to pay the penalty of calibrating the TSC frequency. Therefore provide a TSC_CONSTANT_RATE option to indicate that TSC calibration is not needed. Instead rely on the presence of a tsc_freq_mhz() function provided by the cpu/board. Additionally, assume that if TSC_CONSTANT_RATE is selected the udelay() function in SMM will be the tsc. Change-Id: I1629c2fbe3431772b4e80495160584fb6f599e9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3168 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01tsc: provide monotonic timerAaron Durbin
Implement the timer_monotonic_get() using the TSC. Change-Id: I5118da6fb9bccc75d2ce012317612e0ab20a2cac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3155 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01lapic: monotonic time implementationAaron Durbin
Implement the timer_monotonic_get() functionality based off of the local apic timer. Change-Id: I1aa1ff64d15a3056d6abd1372be13da682c5ee2e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3154 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01x86: use boot state callbacks to disable rom cacheAaron Durbin
On x86 systems there is a concept of cachings the ROM. However, the typical policy is that the boot cpu is the only one with it enabled. In order to ensure the MTRRs are the same across cores the rom cache needs to be disabled prior to OS resume or boot handoff. Therefore, utilize the boot state callbacks to schedule the disabling of the ROM cache at the ramstage exit points. Change-Id: I4da5886d9f1cf4c6af2f09bb909f0d0f0faa4e62 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3138 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-04AMD: Drop six copies of wrmsr_amd and rdmsr_amdKyösti Mälkki
Based on comments in cpu/x86/msr.h for wrmsr/rdmsr, and for symmetry, I have added __attribute__((always_inline)) for these. Change-Id: Ia0a34c15241f9fbc8c78763386028ddcbe6690b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2898 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-01boot: add disable_cache_rom() functionAaron Durbin
On certain architectures such as x86 the bootstrap processor does most of the work. When CACHE_ROM is employed it's appropriate to ensure that the caching enablement of the ROM is disabled so that the caching settings are symmetric before booting the payload or OS. Tested this on an x86 machine that turned on ROM caching. Linux did not complain about asymmetric MTRR settings nor did the ROM show up as cached in the MTRR settings. Change-Id: Ia32ff9fdb1608667a0e9a5f23b9c8af27d589047 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29x86: mtrr: optimize hole carving above 4GiBAaron Durbin
There is an optimization that can take place when hole carving in ranges above 4GiB. If the range is the last range then there is no need to carve UC holes out from the larger WB range. This optimization also has the same assumption of choosing WB as the default MTRR type: the OS needs to properly handle accessing realloacted MMIO resources with PAT so that the MTRR type can be overidden. Below are results using a combination of options. The board this was tested on has 10 variable MTRRs at its disposal. It has 4GiB of RAM. IO hole config #1: hole starts at 0xad800000 No CACHE_ROM and no WRCOMB resources (takes 4 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x0000000100000000 size 0x52800000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 4/6. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0 No CACHE_ROM and 1 WRCOMB resource (takes 6 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000d0000000 size 0x22800000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 6/7. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 5 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0 CACHE_ROM and no WRCOMB resources (takes 7 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000ff800000 size 0x52000000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 11/7. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x0000000080000000 mask 0x0000007fe0000000 type 6 MTRR: 2 base 0x00000000a0000000 mask 0x0000007ff0000000 type 6 MTRR: 3 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 4 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 5 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 6 base 0x0000000100000000 mask 0x0000007f00000000 type 6 CACHE_ROM and 1 WRCOMB resource (takes 8 MTRRs): Previously this combination was impossible without the optimization. MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000d0000000 size 0x22800000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x00000000ff800000 size 0x1f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 12/8. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x0000000080000000 mask 0x0000007fe0000000 type 6 MTRR: 2 base 0x00000000a0000000 mask 0x0000007ff0000000 type 6 MTRR: 3 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 4 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 5 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 6 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 7 base 0x0000000100000000 mask 0x0000007f00000000 type 6 IO hole config #1: hole starts at 0x80000000 No CACHE_ROM and no WRCOMB resources (takes 1 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x0000000100000000 size 0x80000000 type 0 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 1/2. MTRR: WB selected as default type. MTRR: 0 base 0x0000000080000000 mask 0x0000007f80000000 type 0 No CACHE_ROM and 1 WRCOMB resource (takes 3 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 4/3. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 2 base 0x0000000100000000 mask 0x0000007f00000000 type 6 CACHE_ROM and no WRCOMB resources (takes 3 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000ff800000 size 0x7f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 9/3. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 2 base 0x0000000100000000 mask 0x0000007f00000000 type 6 CACHE_ROM and 1 WRCOMB resource (takes 4 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x00000000ff800000 size 0x1f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 10/4. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 2 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 3 base 0x0000000100000000 mask 0x0000007f00000000 type 6 Change-Id: Ia3195af686c3f0603b21f713cfb2d9075eb02806 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2959 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29x86: mtrr: add hole punching supportAaron Durbin
Some ranges would use less variable MTRRs if an UC area can be carved off the top of larger WB range. Implement this approach by doing 3 passes over each region in the addres space: 1. UC default type. Cover non-UC and non-WB regions with respectie type. Punch UC hole at upper end of larger WB regions with WB type. 2. UC default type. Cover non-UC regions with respective type. 3. WB default type. Cover non-WB regions with respective type. The hole at upper end of a region uses the same min alignment of 64MiB. Below are results using a combination of options. The board this was tested on has 10 variable MTRRs at its disposal. It has 4GiB of RAM. IO hole config #1: hole starts at 0xad800000 No CACHE_ROM or WRCOMB resources (takes 4 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x0000000100000000 size 0x52800000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 4/9. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0 No CACHE_ROM. 1 WRCOMB resource (takes 6 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000d0000000 size 0x22800000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 6/10. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 5 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0 CACHE_ROM and no WRCOMB resources (taks 10 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000ff800000 size 0x52000000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 11/10. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x0000000080000000 mask 0x0000007fe0000000 type 6 MTRR: 2 base 0x00000000a0000000 mask 0x0000007ff0000000 type 6 MTRR: 3 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 4 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 5 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 6 base 0x0000000100000000 mask 0x0000007fc0000000 type 6 MTRR: 7 base 0x0000000140000000 mask 0x0000007ff0000000 type 6 Taking a reserved OS MTRR. MTRR: 8 base 0x000000014f600000 mask 0x0000007fffe00000 type 0 Taking a reserved OS MTRR. MTRR: 9 base 0x000000014f800000 mask 0x0000007fff800000 type 0 A combination of CACHE_ROM and WRCOMB just won't work. IO hole config #2: hole starts at 0x80000000: No CACHE_ROM or WRCOMB resources (takes 1 MTRR): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x0000000100000000 size 0x80000000 type 0 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 1/5. MTRR: WB selected as default type. MTRR: 0 base 0x0000000080000000 mask 0x0000007f80000000 type 0 No CACHE_ROM. 1 WRCOMB resource (takes 4 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 4/6. MTRR: WB selected as default type. MTRR: 0 base 0x0000000080000000 mask 0x0000007fc0000000 type 0 MTRR: 1 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0 MTRR: 2 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 3 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0 CACHE_ROM and no WRCOMB resources (takes 6 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000ff800000 size 0x7f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 9/6. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 2 base 0x0000000100000000 mask 0x0000007f80000000 type 6 MTRR: 3 base 0x000000017ce00000 mask 0x0000007fffe00000 type 0 MTRR: 4 base 0x000000017d000000 mask 0x0000007fff000000 type 0 MTRR: 5 base 0x000000017e000000 mask 0x0000007ffe000000 type 0 CACHE_ROM and 1 WRCOMB resource (takes 7 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x00000000ff800000 size 0x1f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 10/7. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 2 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 3 base 0x0000000100000000 mask 0x0000007f80000000 type 6 MTRR: 4 base 0x000000017ce00000 mask 0x0000007fffe00000 type 0 MTRR: 5 base 0x000000017d000000 mask 0x0000007fff000000 type 0 MTRR: 6 base 0x000000017e000000 mask 0x0000007ffe000000 type 0 Change-Id: Iceb9b64991accf558caae2e7b0205951e9bcde44 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2925 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29x86: add rom cache variable MTRR index to tablesAaron Durbin
Downstream payloads may need to take advantage of caching the ROM for performance reasons. Add the ability to communicate the variable range MTRR index to use to perform the caching enablement. An example usage implementation would be to obtain the variable MTRR index that covers the ROM from the coreboot tables. Then one would disable caching and change the MTRR type from uncacheable to write-protect and enable caching. The opposite sequence is required to tearn down the caching. Change-Id: I4d486cfb986629247ab2da7818486973c6720ef5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2919 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29x86: mtrr: add CONFIG_CACHE_ROM supportAaron Durbin
The CONFIG_CACHE_ROM support in the MTRR code allocates an MTRR specifically for setting up write-protect cachine of the ROM. It is assumed that CONFIG_ROM_SIZE is the size of the ROM and the whole area should be cached just under 4GiB. If enabled, the MTRR code will allocate but not enable rom caching. It is up to the callers of the MTRR code to explicitly enable (and disable afterwards) through the use of 2 new functions: - x86_mtrr_enable_rom_caching() - x86_mtrr_disable_rom_caching() Additionally, the CACHE_ROM option is exposed to the config menu so that it is not just selected by the chipset or board. The reasoning is that through a multitude of options CACHE_ROM may not be appropriate for enabling. Change-Id: I4483df850f442bdcef969ffeaf7608ed70b88085 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2918 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29mtrr: honor IORESOURCE_WRCOMBAaron Durbin
All resources that set the IORESOURCE_WRCOMB attribute which are also marked as IORESOURCE_PREFETCH will have a MTRR set up that is of the write-combining cacheable type. The only resources on x86 that can be set to write-combining are prefetchable ones. Change-Id: Iba7452cff3677e07d7e263b79982a49c93be9c54 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2892 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29x86: add new mtrr implementationAaron Durbin
The old MTRR code had issues using too many variable MTRRs depending on the physical address space layout dictated by the device resources. This new implementation calculates the default MTRR type by comparing the number of variable MTRRs used for each type. This avoids the need for IORESOURE_UMA_FB because in many of those situations setting the default type to WB frees up the variable MTTRs to set that space to UC. Additionally, it removes the need for IORESOURCE_IGNORE_MTRR becuase the new mtrr uses the memrange library which does merging of resources. Lastly, the sandybridge gma has its speedup optimization removed for the graphics memory by writing a pre-determined MTRR index. That will be fixed in an upcoming patch once write-combining support is added to the resources. Slight differences from previous MTRR code: - The number of reserved OS MTRRs is not a hard limit. It's now advisory as PAT can be used by the OS to setup the regions to the caching policy desired. - The memory types are calculated once by the first CPU to run the code. After that all other CPUs use that value. - CONFIG_CACHE_ROM support was dropped. It will be added back in its own change. A pathological case that was previously fixed by changing vendor code to adjust the IO hole location looked like the following: MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000d0000000 size 0x22800000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 As noted by the output below it's impossible to accomodate those ranges even with 10 variable MTRRS. However, because the code can select WB as the default MTRR type it can be done in 6 MTRRs: MTRR: default type WB/UC MTRR counts: 6/14. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 5 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0 Change-Id: Idfcc78d9afef9d44c769a676716aae3ff2bd79de Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2889 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-22x86: unify amd and non-amd MTRR routinesAaron Durbin
The amd_mtrr.c file contains a copy of the fixed MTRR algorithm. However, the AMD code needs to handle the RdMem and WrMem attribute bits in the fixed MTRR MSRs. Instead of duplicating the code with the one slight change introduce a Kconfig option, X86_AMD_FIXED_MTRRS, which indicates that the RdMem and WrMem fields need to be handled for writeback fixed MTRR ranges. The order of how the AMD MTRR setup routine is maintained by providing a x86_setup_fixed_mtrrs_no_enable() function which does not enable the fixed MTRRs after setting them up. All Kconfig files which had a Makefile that included amd/mtrr in the subdirs-y now have a default X86_AMD_FIXED_MTRRS selection. There may be some overlap with the agesa and socket code, but I didn't know the best way to tease out the interdependency. Change-Id: I256d0210d1eb3004e2043b46374dcc0337432767 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2866 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-21ramstage: prepare for relocationAaron Durbin
The current ramstage code contains uses of symbols that cause issues when the ramstage is relocatable. There are 2 scenarios resolved by this patch: 1. Absolute symbols that are actually sizes/limits. The symbols are problematic when relocating a program because there is no way to distinguish a symbol that shouldn't be relocated and one that can. The only way to handle these symbols is to write a program to post process the relocations and keep a whitelist of ones that shouldn't be relocated. I don't believe that is a route that should be taken so fix the users of these sizes/limits encoded as absolute symbols to calculate the size at runtime or dereference a variable in memory containing the size/limit. 2. Absoulte symbols that were relocated to a fixed address. These absolute symbols are generated by assembly files to be placed at a fixed location. Again, these symbols are problematic because one can't distinguish a symbol that can't be relocated. The symbols are again resolved at runtime to allow for proper relocation. For the symbols defining a size either use 2 symbols and calculate the difference or provide a variable in memory containing the size. Change-Id: I1ef2bfe6fd531308218bcaac5dcccabf8edf932c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2789 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-18SMM: link against libgccStefan Reinauer
The non-relocatable SMM code was changed to link against libgcc a while back so that printk could use built-in division instead of a hand crafted div() function. However, the relocatable SMM code was not adapted by mistake. This patch links the relocatable SMM against libgcc, too, so we can enable it for Haswell. Change-Id: Ia64a78e2e62348d115ae4ded52d1a02c74c5cea4 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2727 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18haswell: lapic timer supportAaron Durbin
Haswell's BCLK is fised at 100MHz like Sandy/Ivy. Add Haswell's model to the switch statement. Change-Id: Ib9e2afc04eba940bfcee92a6ee5402759b21cc45 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2747 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18haswell: Use SMM ModulesAaron Durbin
This commit adds support for using the SMM modules for haswell-based boards. The SMI handling was also refactored to put the relocation handler and permanent SMM handler loading in the cpu directory. All tseg adjustment support is dropped by relying on the SMM module support to perform the necessary relocations. Change-Id: I8dd23610772fc4408567d9f4adf339596eac7b1f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2728 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-15Google Link: Add remaining code to support native graphicsRonald G. Minnich
The Link native graphics commit 49428d84 [1] Add support for Google's Chromebook Pixel was missing some of the higher level bits, and hence could not be used. This is not new code -- it has been working since last August -- so the effort now is to get it into the tree and structure it in a way compatible with upstream coreboot. 1. Add options to src/device/Kconfig to enable native graphics. 2. Export the MTRR function for setting variable MTRRs. 3. Clean up some of the comments and white space. While I realize that the product name is Pixel, the mainboard in the coreboot tree is called Link, and that name is what we will use in our commits. [1] http://review.coreboot.org/2482 Change-Id: Ie4db21f245cf5062fe3a8ee913d05dd79030e3e8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2531 Tested-by: build bot (Jenkins)
2013-03-14x86: SMM Module SupportAaron Durbin
Add support for SMM modules by leveraging the RMODULE lib. This allows for easier dynamic SMM handler placement. The SMM module support consists of a common stub which puts the executing CPU into protected mode and calls into a pre-defined handler. This stub can then be used for SMM relocation as well as the real SMM handler. For the relocation one can call back into coreboot ramstage code to perform relocation in C code. The handler is essentially a copy of smihandler.c, but it drops the TSEG differences. It also doesn't rely on the SMM revision as the cpu code should know what processor it is supported. Ideally the CONFIG_SMM_TSEG option could be removed once the existing users of that option transitioned away from tseg_relocate() and smi_get_tseg_base(). The generic SMI callbacks are now not marked as weak in the declaration so that there aren't unlinked references. The handler has default implementations of the generic SMI callbacks which are marked as weak. If an external compilation module has a strong symbol the linker will use that instead of the link one. Additionally, the parameters to the generic callbacks are dropped as they don't seem to be used directly. The SMM runtime can provide the necessary support if needed. Change-Id: I1e2fed71a40b2eb03197697d29e9c4b246e3b25e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2693 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14haswell: Add initial support for Haswell platformsAaron Durbin
The Haswell parts use a PCH code named Lynx Point (Series 8). Therefore, the southbridge support is included as well. The basis for this code is the Sandybridge code. Management Engine, IRQ routing, and ACPI still requires more attention, but this is a good starting point. This code partially gets up through the romstage just before training memory on a Haswell reference board. Change-Id: If572d6c21ca051b486b82a924ca0ffe05c4d0ad4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2616 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-08Eliminate do_div().David Hendricks
This eliminates the use of do_div() in favor of using libgcc functions. This was tested by building and booting on Google Snow (ARMv7) and Qemu (x86). printk()s which use division in vtxprintf() look good. Change-Id: Icad001d84a3c05bfbf77098f3d644816280b4a4d Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2606 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-27smm: Update rev 0x30101 SMM revision save stateAaron Durbin
According to both Haswell and the SandyBridge/Ivybridge BWGs the save state area actually starts at 0x7c00 offset from 0x8000. Update the em64t101_smm_state_save_area_t structure and introduce a define for the offset. Note: I have no idea what eptp is. It's just listed in the haswell BWG. The offsets should not be changed. Change-Id: I38d1d1469e30628a83f10b188ab2fe53d5a50e5a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2515 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-11Intel: Replace MSR 0xcd with MSR_FSB_FREQPatrick Georgi
And move the corresponding #define to speedstep.h Change-Id: I8c884b8ab9ba54e01cfed7647a59deafeac94f2d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2339 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-12-06Unify assembler function handlingStefan Reinauer
Instead of adding regparm(0) to each assembler function called by coreboot, add an asmlinkage macro (like the Linux kernel does) that can be different per architecture (and that is empty on ARM right now) Change-Id: I7ad10c463f6c552f1201f77ae24ed354ac48e2d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1973 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-27Remove AMD special case for LAPIC based udelay()Patrick Georgi
- Optionally override FSB clock detection in generic LAPIC code with constant value. - Override on AMD Model fxx, 10xxx, agesa CPUs with 200MHz - compile LAPIC code for romstage, too - Remove #include ".../apic_timer.c" in AMD based mainboards - Remove custom udelay implementation from intel northbridges' romstages Future work: - remove the compile time special case (requires some cpuid based switching) - drop northbridge udelay implementations (i945, i5000) if not required anymore (eg. can SMM use the LAPIC timer?) Change-Id: I25bacaa2163f5e96ab7f3eaf1994ab6899eff054 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1618 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27intel/i82801ix: new southbridge, ICH9Patrick Georgi
Add support for ICH9 southbridge Change-Id: I70612431101bf48d9dcc96ee1b37d257c9ad2ee2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1690 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-20secondary.S: Fix dropping ramstage.aStefan Reinauer
This unused code was not silently dropped as before. Change-Id: Ic76c58e233869a60c3a8a27c2efc2182b3a4442d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1863 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-20Make sure only one udelay function is availableStefan Reinauer
The Agesa wrapper and UDELAY_TIMER2 define their own timer functions, so don't shove in UDELAY_IO Change-Id: Ibe3345e825e0c074d5f531dba1198cd6e7b0a42d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1864 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Clean up stack checking codeStefan Reinauer
Several small improvements of the stack checking code: - move the CPU0 stack check right before jumping to the payload and out of hardwaremain (that file is too crowded anyways) - fix prototype in lib.h - print size of used stack - use checkstack function both on CPU0 and CPU1-x - print amount of stack used per core Signed-off-by: Stefan Reinauer <reinauer@google.com> Test: Boot coreboot on Link, see the following output: ... CPU1: stack: 00156000 - 00157000, lowest used address 00156c68, stack used: 920 bytes CPU2: stack: 00155000 - 00156000, lowest used address 00155c68, stack used: 920 bytes CPU3: stack: 00154000 - 00155000, lowest used address 00154c68, stack used: 920 bytes ... Jumping to boot code at 1110008 CPU0: stack: 00157000 - 00158000, lowest used address 00157af8, stack used: 1288 bytes Change-Id: I7b83eeee0186559a0a62daa12e3f7782990fd2df Reviewed-on: http://review.coreboot.org/1787 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13clean up lapic_cpu_init.cStefan Reinauer
- drop changelog and add license header instead - 80+ character fixes - make stacks array static because it's not used externally - rename copy_secondary_start_to_1m_below() Change-Id: I8b461bea21ee0ddd85ea3a3a923d1e15167f54f0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1821 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Pass the CPU index as a parameter to startup.Ronald G. Minnich
This addition is in support of future multicore support in coreboot. It also will allow us to remove some asssembly code. The CPU "index" -- i.e., its order in the sequence in which cores are brought up, NOT its APIC id -- is passed into the secondary start. We modify the function to specify regparm(0). We also take this opportunity to do some cleanup: indexes become unsigned ints, not unsigned longs, for example. Build and boot on a multicore system, with pcserial enabled. Capture the output. Observe that the messages Initializing CPU #0 Initializing CPU #1 Initializing CPU #2 Initializing CPU #3 appear exactly as they do prior to this change. Change-Id: I5854d8d957c414f75fdd63fb017d2249330f955d Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1820 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-11-13Support better tracking of AP stack usage.Ronald G. Minnich
This change allows us to figure out how much of the AP stacks we are using, as well as to catch any case of an AP overrunning its stack. Also, the stack is poisoned, which is a good way to catch programming errors -- code should never count on auto variables being zerod. The stack bases are recorded in a new array, stacks. At the end, when all APs are initialized, the stacks are walked and the lowest level of the stack that is reached is printed. Build and boot and look for output like this: CPU1: stack allocated from 00148000 to 00148ff4:\ lowest stack address was 00148c4c CPU2: stack allocated from 00147000 to 00147ff4:\ lowest stack address was 00147c4c CPU3: stack allocated from 00146000 to 00146ff4:\ lowest stack address was 00146c4c Note that we used only about 1K of stack, even though in this case we allocated 4K (and in the main branch, we allocate 32K!) Change-Id: I99b7b9086848496feb3ecd207f64203fa69fadf5 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/1818 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-12Fix gcc-4.7 building problem.Han Shen
Applied function attribute to function definition to avoid 'conflicting type' warning. Function declaration is in src/include/cpu.h void secondary_cpu_init(unsigned int cpu_index)__attribute__((regparm(0))); But function definition in lapic_cpu_init.c is missing the "__attribute__" part. Change-Id: Idb7cd00fda5a2d486893f9866920929c685d266e Signed-off-by: Han Shen <shenhan@google.com> Reviewed-on: http://review.coreboot.org/1784 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-09Synchronize rdtsc instructionsStefan Reinauer
The CPU can arbitrarily reorder calls to rdtsc, significantly reducing the precision of timing using the CPUs time stamp counter. Unfortunately the method of synchronizing rdtsc is different on AMD and Intel CPUs. There is a generic method, using the cpuid instruction, but that uses up a lot of registers, and is very slow. Hence, use the correct lfence/mfence instructions (for CPUs that we know support it) Change-Id: I17ecb48d283f38f23148c13159aceda704c64ea5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1422 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-07Move cpus_ready_for_init() to AMD K8Kyösti Mälkki
The function is a noop for all but amd/serengeti_cheetah. Change-Id: I09e2e710aa964c2f31e35fcea4f14856cc1e1dca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1184 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-01Intel Sandybridge: add reserved memory as resourcesKyösti Mälkki
Reserved memory resources will get removed from memory table at the end of write_coreboot_table(), Change-Id: I02711b4be4f25054bd3361295d8d4dc996b2eb3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1372 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-31Revert "Use broadcast SIPI to startup siblings"Sven Schnelle
This reverts commit 042c1461fb777e583e5de48edf9326e47ee5595f. It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I7dd1cba5a4c1e4b0af366b20e8263b1f6f4b9714 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1381 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26USBDEBUG: buffer up to 8 bytesSven Schnelle
EHCI debug allows to send message with 8 bytes length, but we're only sending one byte in each transaction. Buffer up to 8 bytes to speed up debug output. Change-Id: I9dbb406833c4966c3afbd610e1b13a8fa3d62f39 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1357 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-07-25SMM: Fix state table for Intel Core2 CPUsStefan Reinauer
When fixing the SMM state table for SandyBridge/IvyBridge CPUs the wrong table was used for older 64bit capable CPUs. Change-Id: Ia7dff21aa3f0e5aa61575634fc839777de6bef10 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1353 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-25Fix LAPIC timer on Ivy Bridge systemsStefan Reinauer
The LAPIC timer is running at BCLK (100MHz) on Sandy Bridge and Ivy Bridge systems. However, the current timer code assumed that the clock would run at 200MHz instead. This made all delays twice as long as needed. Change-Id: I41b1186daee11cfd9a25b3a9d5ebdeeb271293c7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1330 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24SMM: Fix state save map for sandybridge and TSEGDuncan Laurie
There are enough differences that it is worth defining the proper map for the sandybridge/ivybridge CPUs. The state save map was not being addressed properly for TSEG and needs to use the right offset instead of pointing in ASEG. To do this properly add a required southbridge export to return the TSEG base and use that where appropriate. Change-Id: Idad153ed6c07d2633cb3d53eddd433a3df490834 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1309 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24SMM: Add heap region and move C handler higher in regionDuncan Laurie
In order to support SPI and ELOG drivers the SMM region needs to be able to be larger than the previous allocation below 0x7400. Now that we have support for 4M TSEG we do not need to live in this region. This change adds a 16KB heap region abofe the save state area at TSEG+64KB and moves the C handler above this. The heap region is then available for malloc and the C handler can grow to support flash and event log features. While updating the memory map comment in assembly stub I also added a pause instruction to the cpu spin lock as this was added to the C code in latest upstream rebase. Dump sympbols from smm.elf binary to see the new regions: 00010000 B _heap 00014000 B _eheap 00014000 T _smm_c_handler_start 0001b240 T _smm_c_handler_end Change-Id: I45f0ab4df1fdef3b626f877094a58587476ac634 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1308 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Rename cache_lbmem() to cache_ramstage()Stefan Reinauer
... and don't require it to specify a cache type. This function is only used on romcc boards, and should go away (because all boards should be switched to CAR) Change-Id: Ic32ca3be1afffc773c72c140e88b338d48a0c8ca Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1288 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24MTRR: drop repetetive debug messageStefan Reinauer
It's not really useful anymore I guess, and it makes the log files harder to read. Hence dropping it. Change-Id: If4c3e8b40ae491ca527ef62f8145206960f6579d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1272 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-23Re-initialize Local APIC timer on APsStefan Reinauer
In order to be able to use udelay in code running on AP cores the timer has to be initialized on the according local APICs or the system will just hang when udelay is used. Change-Id: I776bc96aa6d876ff2582d0c05cbc9c7611cb06b5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1267 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-16Check for IORESOURCE_UMA_FB in MTRR setupKyösti Mälkki
If northbridge called uma_resource() a resource of this type should be found when walking the resources list. For now, be rude and don't even try to combine it with neighboring regions. As the type is un-cacheable it is dominant over other MTRR setups claiming the same region. Change-Id: I57805e7e7da0709f8ed78d8df62c2abf22172a06 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1215 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12Drop Kconfig VAR_MTRR_HOLE optionKyösti Mälkki
All but one board use the default value of enabled. Disabling this can only increase the number of MTRR registers used. Change-Id: I7d28adc31b9fae2301e4ff78fcb96486f81d5ec2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-12Fix stack assignment during CPU initializationSven Schnelle
There are two errors in the code. The first one is a missing $ sign in mov _stack, %esp. Thanks to Ronald G Minnich for catching that bug. The second bug is the 'incl %eax', which shouldn't be there, as there's no secondary CPU with index 0. CPU0 uses always the stack below _estack. Change-Id: Id267a654ba95b0e898eeaaafb2403b438250a563 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1212 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-07-05Only copy real-mode section of SIPI vectorKyösti Mälkki
The SIPI vector copy can use a static location below 1MB, aligned to 4kB. Jump out of the copy once in protected mode. Change-Id: I6299aa3448270663941cf2c4113efee74bcc7993 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1165 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-05Fix the CPU index parameter passed to secondary_cpu_init().Kyösti Mälkki
Count 0,1,2,3,... instead of 0,2,3,4,... Change-Id: I3c6b85e5e71b32deac5470809e1618d28f19c00f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1173 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-07-02Use broadcast SIPI to startup siblingsSven Schnelle
The current code for initializing AP cpus has several shortcomings: - it assumes APIC IDs are sequential - it uses only the BSP for determining the AP count, which is bad if there's more than one physical CPU, and CPUs are of different type Note that the new code call cpu->ops->init() in parallel, and therefore some CPU code needs to be changed to address that. One example are old Intel HT enabled CPUs which can't do microcode update in parallel. Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1139 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-06-12udelay: add missing bus frequencySven Schnelle
commit 5b6404e4195157eac8d97ae5bf30f45612109d57 ("Fix timer frequency detection on Sandybridge") reworked the udelay code, but didn't add the 333MHz FSB entry used on Model 15 Xeons. Change-Id: Ie34f9ae3703b64672625e7bf1b943654a7a5eaa6 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1099 Tested-by: build bot (Jenkins)
2012-05-30Fix the location of "Setting variable MTRR" printk.Denis 'GNUtoo' Carikli
Without that fix the debugging is harder because the person debugging coreboot will see the following twice(note the repeated MTRR number): Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB [...] Setting variable MTRR 1, base: 4096MB, range: 512MB, type WB Setting variable MTRR 1, base: 4608MB, range: 256MB, type WB Setting variable MTRR 1, base: 3072MB, range: 1024MB, type UC instead of the following twice: Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB [...] Setting variable MTRR 1, base: 3072MB, range: 1024MB, type UC Thanks to kmalkki on #coreboot's Freenode IRC channel for the idea: May 25 23:57:17 <kmalkki> I would add (move) that "Setting variable MTRR..." debug at the end of set_var_mtrrs() Change-Id: I9f4b7110ba34d017a58d8cc5fb06a7b1c3d0c8aa Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/1058 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-05-08Some more #if cleanupPatrick Georgi
Replace #elif (CONFIG_FOO==1) with #elif CONFIG_FOO find src -type f -exec sed -i "s,\(#.*\)(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]1),\1\2,g" {} + (manual tweak since it hit a false positive) Replace #elif (CONFIG_FOO==0) with #elif !CONFIG_FOO find src -type f -exec sed -i "s,\(#.*\)(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]0),\1\!\2,g" {} + Change-Id: I8f4ebf609740dfc53e79d5f1e60f9446364bb07d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1006 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-20Revert wbind added to the reset_vectorMarc Jones
This change reverts : Change Id I4fdb281b2b684ab5fea999aae28ca08dce24da4d The wbinvd (or invd) should not be needed at the reset vector. It causes problems with some CPUs AP init. If there is a problem with a specific CPU and it must be done at this location, it should be added conditionally. Change-Id: I85b71b0a07f039359a4fb889aaa05c75fff619be Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/908 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 11:00:02 +0000