Age | Commit message (Collapse) | Author |
|
Change f43adf0 (intel/common/block/cpu: Change post_cpus_init after
BS_DEV RESOURCES) moved post_cpus_init to BS_OS_RESUME for S3
path. This results in BSP timing out waiting for APs to be
parked. This change increases the time out value for APs to be parked
to 250ms. This value was chosen after running suspend-resume stress
test and capturing the maximum time taken for APs to be parked for
100 iterations. Typical values observed were ~150ms. Maximum value
observed was 152ms.
BUG=b:76442753
TEST=Verified for 100 iterations that suspend-resume does not run into
any AP park time out.
Change-Id: Id3e59db4fe7a5a2fb60357b05565bba89be1e00e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Since the timeout in bsp_do_flight_plan is bumped up to 1 second, this
change adds a print to indicate the amount of time it takes for all the
APs to check-in.
TEST=Verified on Nami that it prints:
"bsp_do_flight_plan done after 395 msecs."
Change-Id: I4c8380e94305ed58453ed18b341b3b923949d7a8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently, the AP check-in time-out in bsp_do_flight_plan is set to
100ms. However, as the number of APs increases, contention could
increase especially for resource like UART. This led to MP record
time-out issues on KBL platform with 7 APs and serial-console enabled
BIOS image.
This change increases the time-out value to 1 second to be on the safer
side and let APs check-in before continuing boot.
BUG=b:74085891
TEST=Verified that MP record time-out is not observed anymore on Nami.
Change-Id: I979c11a10e6888aef0f71b5632ea803a67bbb0ff
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/24965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
AMD's fixed MTRRs have RdDram and WrDram bits that route memory
accesses to DRAM vs. MMIO. These are typically hidden for normal
operation by clearing SYS_CFG[19] (MtrrFixDramModEn). According to
BKDGs and AMD64 Programmer's Manual vol 2, this bit is clear at
reset, should be set for configuration during POST, then cleared for
normal operation.
Attempting to modify the RdDram and WrDram settings without unhiding
them causes a General Protection Fault. Add functions to enable and
disable MtrrFixDramModEn. Unhide/hide as necessary when copying or
writing the fixed MTRRs.
Finally, modify sipi_vector.S to enable the bits prior to writing
the fixed MTRRs and disable when complete.
This functionality is compiled out on non-AMD platforms.
BUG=b:68019051
TEST=Boot Kahlee, check steps with HDT
Change-Id: Ie195131ff752400eb886dfccc39b314b4fa6b3f3
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/23722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the missing *r* of the possessive pronoun *your*.
Change-Id: I2b520f398a904eb8e4412835d90bde1ee0b504b7
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/23758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
If GENERIC_UDELAY is selected don't try to use UDELAY_IO as there
will be a udelay() conflict at link time.
BUG=b:72378235,b:72170796
Change-Id: I9e01c9daddd0629ecc38a809889b39a505c0e203
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/23422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All boards and chips that are still using LATE_CBMEM_INIT are being
removed as previously discussed.
If these boards and chips are updated to not use LATE_CBMEM_INIT, they
can be restored to the active codebase from the 4.7 branch.
chips:
soc/intel/sch
Mainboards:
mainboard/iwave/iWRainbowG6
Change-Id: Ida0570988a23fd0d13c6fcbe54f94ab0668c9eae
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/22027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Not all SMM save state sizes equate to having enough stack in the
permanent SMM handler. Therefore, ensure 1KiB of stack is available for
each cpu's stack. Intel's save state size is 1KiB, but AMD's save state
size is only 512. Therefore, decouple save state size from the per
cpu stack size.
BUG=b:70027919
Change-Id: I54b9e6f3cc0ad6ca3d7b60b2b422b5dc5a78a552
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ib1b761fc417f1bb000f408d3bed5e8666963f51d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/22603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
coreboot has a lapicid() function, so use it.
Change-Id: I7f536c229f271674c34d722b5db96ce665b720f1
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/22192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The code used to split up ranges >64MiB into 64MiB-aligned and
unaligned parts. However in its current state the next step,
calc_var_mtrr_range(), results in the same allocation, no mat-
ter if we split the range up before. So just drop the split-up.
Change-Id: I5481fbf3168cdf789879064077b63bbfcaf122c9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Ensure the stack is properly aligned in the SIPI handler. This
avoids an exception when an aligned instruction is performed on
stack data.
BUG=b:66003093
TEST=boot kahlee built with gcc 6.3
Change-Id: Ibdd8242494c6a2bc0c6ead7ac98be55149219d7c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
clang wont compile `cmp` asm opcode because it's ambiguous,
use the correct op suffix `cmpl`
Change-Id: I82da5a9065b382e182dc7d502c7dca2fc717543b
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The original purpose of adjust_cpu_apic_entry() was to set
up an APIC map. That map was effectively only used for mapping
*default* APIC id to CPU number in the SMM handler. The normal
AP startup path didn't need this mapping because it was whoever
won the race got the next cpu number. Instead of statically
calculating (and wrong) just initialize the default APIC id
map when the APs come online. Once the APs are online the SMM
handler is loaded and the mapping is utilized.
Change-Id: Idff3b8cfc17aef0729d3193b4499116a013b7930
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
It's arch specific, so no need to pollute non-x86 with it.
Change-Id: I99ec76d591789db186e8a33774565e5a04fc4e47
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/21392
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The addr32 prefix is required by binutils, because even when
given an explicit address which is greater than 64KiB, it will
throw a warning about truncation, and stupidly emit the opcode
with a 16-bit addressing mode and the wrong address.
However, in the case of LLVM, this doesn't happen, and is happy
to just use 32-bit addressing whenever it may require it. This
means that LLVM never really needs an explicit addr32 prefix to
use 32-bit addressing in 16-bit mode.
Change-Id: Ia160d3f7da6653ea24c8229dc26f265e5f15aabb
Also-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Change-Id: I18c62ad034249c5ad14e5d5e708b4f0d4bcbf400
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
LLVM AS doesn't support as much GNU junk extensions, data16/32
is almost never needed in truth if we just use the correct op
suffix. So do that here, fixes clang/llvm builds with the
integrated-as toggled on.
Change-Id: I6095d03d0289b418a49a10f135de5eb0e117cae0
Also-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fail at build-time if one of the following happens:
Platform includes SMI handler setup function smm_init()
in the build when configuration has HAVE_SMI_HANDLER=n.
Platform does not implement smm_init_completion() when
HAVE_SMI_HANDLER=y.
Change-Id: I7d61c155d2b7c2d71987980db4c25d520452dabf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
SMM relocation code overwrite low memory owned by OS.
Change-Id: Ifa3d28bed3d3db65b0707bde62ae2b424a231f1a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19405
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7c138758707f87c0d7a827b6887c7752d3714cde
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I2d6fdfd0465fe5f558daa04c6f980f7226596b55
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21087
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This chipset was just added and had a few places that needed to be
fixed.
Change-Id: Ief048c4876c5a2cb538c9cb4b295aba46a4fff62
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20684
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ic9226098dafa2465aa5fccc72c442de2b94e44c7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
At a process _start, the stack is expected to be aligned to a
16-byte boundary. Upon entry to any function the stack frame
must have the end of any arguments also aligned. In other words
the value of %esp+4 or %rsp+8 is always a multiple of 16 (1).
Align the stack down inside _secondary_start and preserve proper
alignment for the call to secondary_cpu_init.
Although 4-byte alignment is the minimum requirement for i386,
some AMD platforms use SSE instructions which expect 16-byte.
1) http://wiki.osdev.org/System_V_ABI
See "Initial Stack and Register State" and "The Stack Frame"
in the supplements.
BUG=chrome-os-partner:62841664
Change-Id: I72b7a474013e5caf67aedfabeb8d8d2553499b73
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/20537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some of these can be changed from #if to if(), but that will happen
in a follow-on commmit.
Change-Id: I4e5e585c3f98a129d89ef38b26d828d3bfeac7cf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fixes report found by undefined behavior sanitizer. Dereferencing a
pointer that's not aligned to the size of access is undefined behavior.
Remove unnecessary memset().
Change-Id: I1362a3eb8c97f5c7e848d75f8d1a219968a7ef9e
Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-on: https://review.coreboot.org/20452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
If SSE instructions are enabled in the build assume the SMM
modules are compiled with SSE instructions. As such enable
the SSE instructions in SMM mode by setting up the cr4 register.
In addition, provide a place to save and restore the SSE state
in both the relocation handler and permanent handler.
Change-Id: Ifa16876b57544919fde88fba5b8f18e4ca286841
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20244
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the do while loop, it can be avoided do use an infinite loop with a
break condition inside.
Change-Id: I030f6782ad618b55112a2f0bac8dda08b497a9f1
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/20269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use the existing macros for CR0 to set the flags in the
SIPI vector code.
Change-Id: Iad231b7611b613512fd000a7013175e91542ac10
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use the existing macros for CR0 to set the flags in the
SMM stub.
Change-Id: I0f02fd6b0c14cee35ec33be2cac51057d18b82c0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20242
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
For sizes and dimensions use size_t. For pointer casts
use uintptr_t. Also, use the ALIGN_UP macro instead of
open coding the operation.
Change-Id: Id28968e60e51f46662c37249277454998afd5c0d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20241
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use define for SSA base address.
Move EM64T area to 0x7c00 and add reserved area of size 0x100,
as there's no indication that the address 0x7d00 exists on any
platform.
No functional change.
Change-Id: I38c405c8977f5dd571e0da3a44fcad4738b696b2
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The previous implementation was using a for loop. By it's
very definition the last statement in the for loop declaration
is done at the end of the loop. Therefore, if the conditional for
breaking out of the for loop because of a timeout would always
see a value of 0 for the number of APs accepted. Correct this
by changing to a while loop with an explicit timeout condition
at the end of the loop.
Change-Id: I503953c46c2a65f7e264ed49c94c0a46d6c41c57
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
If an MTRR solution exceeds the number of available MTRRs
don't attempt to commit the result. It will just GP fault
with the MSR write to an invalid MSR address.
Change-Id: I5c4912d5244526544c299c3953bca1bf884b34d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20163
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Change-Id: Id88455f2c7c28e0b298675b9af2a39361759a34a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19120
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch adds a simple function that can be used to check if
CAR_GLOBALs are currently being read from CAR or from DRAM.
Change-Id: Ib7ad0896a691ef6e89e622b985417fedc43579c1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
When a platform is using postcar stage it's by definition not
tearing down cache-as-ram from within romstage prior to loading
ramstage. Because of this property there's no need to migrate
CAR_GLOBAL variables to cbmem.
Change-Id: I7c683e1937c3397cbbba15f0f5d4be9e624ac27f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19215
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In case something goes wrong on one of the
cpus, add the ability to use a barrier with
timeout so that other cpus don't wait forever.
Remove static from barrier wait and release.
BUG=chrome-os-partner:59875
BRANCH=reef
TEST=None
Change-Id: Iab6bd30ddf7632c7a5785b338798960c26016b24
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/18107
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error and warnings detected by checkpatch.pl:
ERROR: trailing statements should be on next line
WARNING: storage class should be at the beginning of the declaration
WARNING: type 'long unsigned int' should be specified in [[un]signed] [short|int|long|long long] order
TEST=Build and run on Galileo Gen2
Change-Id: I9cfe42cf1836cfd40ffcf67237c818543f508feb
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18845
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: line over 80 characters
TEST=Build and run on Galileo Gen2
Change-Id: I56ea28826963403dc0719f40c13782c56dc97feb
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18844
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warning detected by checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
TEST=Build and run on Galileo Gen2
Change-Id: I97bbe8ba19680bdb99fa38daa5e18b440c338576
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18843
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following warnings detected by checkpatch.pl
WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
WARNING: else is not generally useful after a break or return
TEST=Build and run on Galileo Gen2
Change-Id: I2d6b22c66d52f5f2d24b15270ad4b52894adebc2
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18842
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error and warning detected by checkpatch.pl:
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
TEST=Build and run on Galileo Gen2
Change-Id: Ie6e4dd4c3eb0d2c44ecd008740dfc348d496fe78
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18841
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following errors and warning detected by checkpatch.pl:
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: space prohibited after that open parenthesis '('
ERROR: need consistent spacing around '|' (ctx:WxV)
ERROR: need consistent spacing around '|' (ctx:VxW)
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: spaces required around that '==' (ctx:VxV)
ERROR: spaces required around that ':' (ctx:ExV)
WARNING: space prohibited between function name and open parenthesis '('
TEST=Build and run on Galileo Gen2
Change-Id: I61d08055b207c607d5b7d72b0094ad8e24fbd106
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18840
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the following error detected by checkpatch.pl:
ERROR: "foo * bar" should be "foo *bar"
TEST=Build and run on Galileo Gen2
Change-Id: I8b5342df3f42dbb4576aecf5b0a59f195ae8511e
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18839
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I436bf0e7db008ea78e29eaeef10bea101e6c8922
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18405
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On Netburst (Pentium 4) the fsb cannot be read from
MSR_FSB_FREQ (msr 0xcd). One has to use msr 0x2c instead.
Change-Id: I0beccba2e4a8ec5cd23537b2207f9c49a040fd73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17832
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The value for _size was not evaluated correctly if ramstage
is relocated, make the calculation runtime.
While touching it, move symbol declarations to header file.
Change-Id: I4402315945771acf1c86a81cac6d43f1fe99a2a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17784
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There are circumstances where the APs need to run a piece of
code later in the boot flow. The current MP init just parks
the APs after MP init is completed so there's not an opportunity
to target running a piece of code on all the APs at a later time.
Therefore, provide an option, PARALLEL_MP_AP_WORK, that allows
the APs to perform callbacks.
BUG=chrome-os-partner:60657
BRANCH=reef
Change-Id: I849ecfdd6641dd9424943e246317cd1996ef1ba6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17745
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
We have kconfig.h auto-included and it pulls config.h too.
Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17655
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Certain platforms have a poorly performing SPI prefetcher so even if
accessing MMIO BIOS once the fetch time can be impacted. Payload
loading is one example where it can be impacted. Therefore, add the
ability for a platform to reconfigure the currently running CPU's
variable MTRR settings for the duration of coreboot's execution.
The function mtrr_use_temp_range() is added which uses the previous
MTRR solution as a basis along with a new range and type to use.
A new solution is calculated with the updated settings and the
original solution is put back prior to exiting coreboot into the OS
or payload.
Using this patch on apollolake reduced depthcharge payload loading
by 75 ms.
BUG=chrome-os-partner:56656,chrome-os-partner:59682
Change-Id: If87ee6f88e0ab0a463eafa35f89a5f7a7ad0fb85
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17371
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I0903b7ca9eada4beacfcdbcacddec23c3515651e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16850
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Move the funtion to find most significant bit set(fms)
and function to find least significant bit set(fls) to a common
place. And remove the duplicates.
Change-Id: Ia821038b622d93e7f719c18e5ee3e8112de66a53
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16525
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I17d5efe382da5301a9f5d595186d0fb7576725ca
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16391
Tested-by: build bot (Jenkins)
Reviewed-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-by: Antonello Dettori <dev@dettori.io>
|
|
Change-Id: I7fb9bfcaeec0b9dfd0695d2b2d398fd01091f6bc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16286
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Omar Pakker
|
|
Change-Id: I82e0736dc6b44cfcc57cdfdc786c85c4b6882260
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16276
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
|
|
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I58d5c16de796a91fa14d8db78722024266c09a94
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15934
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I103167a0c39627bcd2ca1d0d4288eb5df02a6cd2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15935
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Quark does not support the rdmsr and wrmsr instructions. In this case
use a SOC specific routine to support the setting of the MTRRs. Migrate
the code from FSP 1.1 to be x86 CPU common.
Since all rdmsr/wrmsr accesses are being converted, fix the build
failure for quark in lib/reg_script.c. Move the soc_msr_x routines and
their depencies from romstage/mtrr.c to reg_access.c.
TEST=Build and run on Galileo Gen2
Change-Id: Ibc68e696d8066fbe2322f446d8c983d3f86052ea
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15839
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The fixed MTRRs cover the range [0:1MiB). While calculating the
variable MTRR usage the 1MiB boundary is checked such that
an excessive number of MTRRs aren't used because of unnatural
alignment at the low end of the physical address space. Howevever,
those checks weren't inclusive of the 1MiB boundary. As such a
variable MTRR could be used for a range which is actually covered
by the fixed MTRRs when the end address is equal to 1MiB. Likewise,
if the starting address of the range lands on the 1MiB boundary
then more variable MTRRs are calculated in order to meet natural
alignment requirements.
Before:
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0
0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6
0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0
0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 7/17.
MTRR: WB selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000007ffff00000 type 0
MTRR: 1 base 0x000000007b800000 mask 0x0000007fff800000 type 0
MTRR: 2 base 0x000000007c000000 mask 0x0000007ffc000000 type 0
MTRR: 3 base 0x0000000080000000 mask 0x0000007fe0000000 type 0
MTRR: 4 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0
MTRR: 5 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1
MTRR: 6 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0
After:
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0
0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6
0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0
0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 6/8.
MTRR: WB selected as default type.
MTRR: 0 base 0x000000007b800000 mask 0x0000007fff800000 type 0
MTRR: 1 base 0x000000007c000000 mask 0x0000007ffc000000 type 0
MTRR: 2 base 0x0000000080000000 mask 0x0000007fe0000000 type 0
MTRR: 3 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0
MTRR: 4 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1
MTRR: 5 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0
BUG=chrome-os-partner:55504
Change-Id: I7feab38dfe135f5e596c9e67520378a406aa6866
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15780
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
No need to make low memory backup unless we are on
S3 resume path.
Hide those details from ACPI.
Change-Id: Ic08b6d70c7895b094afdb3c77e020ff37ad632a1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15241
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14599
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Previously, the XIP_ROM_SIZE Kconfig variable is used globally on
x86 platforms with the assumption that all chipsets utilize this
value. For the chipsets which do not use the variable it can lead
to unnecessary alignment constraints in cbfs for romstage. Therefore,
allow those chipsets a path to not be burdened by not passing
'-P $(XIP_ROM_SIZE)' to cbfstool when adding romstage.
Change-Id: Id8692df5ecec116a72b8e5886d86648ca959c78b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14625
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
With all users converted to using the mp_ops callbacks there's
no need to expose that surface area. Therefore, keep it all
within the mp_init compilation unit.
Change-Id: Ia1cc5326c1fa5ffde86b90d805b8379f4e4f46cd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14598
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to reduce code duplication provide a common flow
through callback functions that performs the multiprocessor
and optionally SMM initialization. The existing MP flight
records are utilized but a common flow is provided such
that the chipset/cpu only needs to provide a mp_ops
structure which has callbacks to gather info and provide
hooks at certain points in the sequence.
All current users of the MP code can be switched over to
this flow since there haven't been any flight records that
are overly complicated and long. After the conversion
has taken place most of the surface area of the MP
API can be hidden away within the compilation unit proper.
Change-Id: I6f70969631012982126f0d0d76e5fac6880c24f0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14557
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Unconditionally provide the backup default SMM area API. There's no
reason to guard the symbols behind anything since linker garbage
collection is implemented. A board or chipset is free to use the
code or not without needing to select an option.
Change-Id: I14cf1318136a17f48ba5ae119507918190e25387
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14561
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The SMM module loader code was guarded by CONFIG_SMM_TSEG,
however that's not necessary. It's up to the chipset to take
advantage of the SMM module loading. It'll get optimized out
if the code isn't used anyway so just expose the declarations.
Change-Id: I6ba1b91d0c84febd4f1a92737b3d7303ab61b343
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14560
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The BSP and AP callback declarations both had an optional argument
that could be passed. In practice that functionality was never used
so drop it.
Change-Id: I47fa814a593b6c2ee164c88d255178d3fb71e8ce
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14556
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable caching of BIOS region with variable MTRR. This is most
useful if enabled early such as in bootblock.
Change-Id: I39f33ca43f06fce26d1d48e706c97f097e3c10f1
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14480
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I8fd79d438756aae03649e320d4d640cee284d88a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14298
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The delay_tsc.c compilation unit used the C preprocessor
to conditionally compile different code paths. Instead of
guarding large blocks of code allow the compiler to optimize
out unreachable code.
Change-Id: I660c21d6f4099b0d7aefa84b14f1e68d6fd732c3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14302
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
The delay_tsc.c code took different paths depending
__PRE_RAM__ being defined or not. Also, timer_monotonic_get()
was only compiled in a !__PRE_RAM__ environment. Clean up
the code paths by employing CAR_GLOBAL for the global state
which allows the same code to be used in all stages.
Lastly, handle apollolake fallout now that init_timer() is
not needed in placeholders.c.
Change-Id: Ia769fa71e2c9d8b11201a3896d117097f2cb7c56
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14301
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
The current code in delay_tsc.c uses globals and is heavily
guarded by a lot of preprocessor macros. In order to remove
__PRE_RAM__ constraints one needs to use CAR_GLOBAL for the
global variables. Therefore, abstract away direct access to
the globals such that CAR_GLOBAL can be easily employed.
Change-Id: I3350d1a762120476926c8d9f5f5a7aba138daf5f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14300
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
It's not selected by any path so it's a dead option with
associated dead code. Remove the config option as well as
the code paths that were never used any longer.
Change-Id: Ie536eee54e5c63bd90192f413c69e0dd2fea9171
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14299
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Myles Watson <mylesgw@gmail.com>
|
|
Certain chipsets don't have a memory-mapped boot media
so their code execution for stages prior to DRAM initialization
is backed by SRAM or cache-as-ram. The postcar stage/phase
handles the cache-as-ram situation where in order to tear down
cache-as-ram one needs to be executing out of a backing
store that isn't transient. By current definition, cache-as-ram
is volatile and tearing it down leads to its contents disappearing.
Therefore provide a shim layer, postcar, that's loaded into
memory and executed which does 2 things:
1. Tears down cache-as-ram with a chipset helper function.
2. Loads and runs ramstage.
Because those 2 things are executed out of ram there's no issue
of the code's backing store while executing the code that
tears down cache-as-ram. The current implementation makes no
assumption regarding cacheability of the DRAM itself. If the
chipset code wishes to cache DRAM for loading of the postcar
stage/phase then it's also up to the chipset to handle any
coherency issues pertaining to cache-as-ram destruction.
Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14140
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of hard-coding var mtrr numbers in code, use this function to
identify the first available variable mtrr. If no such mtrr is
available, the function will return -1.
Change-Id: I2a1e02cdb45c0ab7e30609641977471eaa2431fd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14115
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
In order to make this work earlymtrr.c needed to be removed
from intel/truxton/romstage.c. It's not a ROMCC board so
there's no reason to be including .c files.
Change-Id: If4f5494a53773454b97b90fb856f7e52cadb3f44
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14094
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
I see no user of any of this code. Remove it.
Change-Id: I776cd3d9ac6578ecb0fe6d98f15611e4463afb7a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14098
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The Intel i3100 northbridge code is the only user of
cache_ramstage(). Therefore, place it next to the sole
consumer.
Change-Id: If15fb8d84f98dce7f4de9e089ec33035622d8f74
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14097
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The current MTRR API doesn't allow one to detect variable MTRRs
along with handling fixed MTRRs in one function call. Therefore,
add x86_setup_mtrrs_with_detect() to perform the same actions
as x86_setup_mtrrs() but always do the dynamic detection.
Change-Id: I443909691afa28ce11882e2beab12e836e5bcb3d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13935
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I25ea327ed151e18ccb5d13626d44925d2a253d08
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/10012
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Attempt to better document the symbol usage in car.ld for
cache-as-ram usage. Additionally, add _car_region_[start|end]
that completely covers the entire cache-as-ram region. The
_car_data_[start|end] symbols were renamed to
_car_relocatable_data_[start|end] in the hopes of making it
clearer that objects within there move. Lastly, all these
symbols were added to arch/symbols.h.
Change-Id: I1f1af4983804dc8521d0427f43381bde6d23a060
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13804
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of keeping track of all the combinations of entry points
depending on the stage and other options just use _start. That way,
there's no need to update the arch/header.ld for complicated cases
as _start is always the entry point for a stage.
Change-Id: I7795a5ee1caba92ab533bdb8c3ad80294901a48b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13882
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
In order to align the entry points for the various stages
on x86 to _start one needs to rename the reset_vector symbol.
The section is the same; it's just a symbol change.
Change-Id: I0e6bbf1da04a6e248781a9c222a146725c34268a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13881
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
In order to avoid collisions with other _start symbols while
grepping and future ones be explicit about which _start this
one is: the 16-bit one only used by the reset vector in the
bootblock.
Change-Id: I6d7580596c0e6602a87fb158633ce9d45910cec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13880
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
It's helpful to see the reset vector in objdump output. Without
it being marked executable it doesn't get displayed.
Change-Id: I85cb72ea0727d3f3c2186ae20b9c5cfe5d23aeed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13879
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Patrick at least indicated this jump after the reset
vector jump was a remnant from some construct used long
ago in the project. It's not longer used (nor could I find
where it was). Therefore, remove it.
Change-Id: I31512c66a9144267739b08d5f9659c4fcde1b794
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13878
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This is needed in a follow-on patch to enable udelay() handling on
apollolake, which is a dependency for the console code.
Change-Id: I7da6a060a91b83f3b32c5c5d269c102ce7ae3b8a
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/13302
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This fixes some spelling and whitespace issues that I came across
while working on various things in the tree.
There are no functional changes.
Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of tagging object files with .<class>, move them to a <class>
directory below $(obj)/. This way we can keep a 1:1 mapping between
source- and object-file names.
The 1:1 mapping is a prerequisite for Ada, where the compiler refuses
any other object-file name.
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: Idb7a8abec4ea0a37021d9fc24cc8583c4d3bf67c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13181
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
There were several spots in the tree where the path to a per class
object file was hardcoded. To make use of the src-to-obj macro for
this, it had to be moved before the inclusion of subdirs. Which is
fine, as it doesn't have dependencies beside $(obj).
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13180
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These files provide symbols needed by console and uart drivers. This
was not an issue in the past, as we were not setting up a C
environment this early in the boot process.
Change-Id: Ied5106ac30a68971c8330e8f8270ab060994a89d
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12869
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The error informing the user that the CPU device cannot be
allocated has a typo incorrectly spelling "allocate" as
"allocte".
TEST=Compiled
Change-Id: I2a6bad56133e375e2fd6a670593791414bf0dc2c
Signed-off-by: Jacob Laska <jlaska91@gmail.com>
Reviewed-on: https://review.coreboot.org/13030
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Frisch <bfrisch@xes-inc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We currently race in SMM init on Atom 230 (and potentially
other CPUs). At least on the 230, this leads to a hang on
RSM, likely because both hyperthreads mess around with
SMBASE and other SMM state variables in parallel without
coordination. The same behaviour occurs with Atom D5xx.
Change it so first APs are spun up and sent to sleep, then
BSP initializes SMM, then every CPU, one after another.
Only do this when SERIALIZE_SMM_INITIALIZATION is set.
Set the flag for Atom CPUs.
Change-Id: I1ae864e37546298ea222e81349c27cf774ed251f
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/6311
Tested-by: build bot (Jenkins)
Tested-by: BSI firmware lab <coreboot-labor@bsi.bund.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP 1.0 has a fixed-size temporary cache size and address and the entire
cache is migrated in the FSP FspInitEntry() function.
Previous code expected the symbol _car_data_start to be the same as
CONFIG_DCACHE_RAM_BASE and _car_data_end to be the same as
_preram_cbmem_console.
FSP 1.0 is the only one that migrates _preram_cbmem_console.
Others leave that where it is and extract the early console data in
cbmemc_reinit(). Special handling is needed to handle that.
Commit dd6fa93d broke both assumptions and so broke the timestamp table
and console.
The fix is to use CONFIG_DCACHE_RAM_BASE when calculating the offset and
to use _preram_cbmem_console instead of _car_data_end for the console
check.
Change-Id: I6db109269b3537f7cb1300357c483ff2a745ffa7
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: http://review.coreboot.org/12511
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of having to have an ifeq() all across the code base,
use $(target-objcopy). And correct target-objcopy to a value
that objcopy actually understands.
Change-Id: Id5dea6420bee02a044dc488b5086d109e806d605
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11090
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The Intel cave creek chipset needs to have port 80 routing configured
before any post codes can be sent to port 80h. Sending post codes out
before the routing is done will hang the system.
This patch allows us to disable the first couple of post codes that go
out before the routing can be configured.
The Kconfig symbol is selected by the cave creek chipset (fsp_i89xx).
Change-Id: I9bf41669ec32744f87a1ed2de011d31c72ea38da
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12422
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: York Yang <york.yang@intel.com>
|