summaryrefslogtreecommitdiff
path: root/src/cpu/x86/smm
AgeCommit message (Collapse)Author
2018-01-15Intel sch board & chip: Remove - using LATE_CBMEM_INITMartin Roth
All boards and chips that are still using LATE_CBMEM_INIT are being removed as previously discussed. If these boards and chips are updated to not use LATE_CBMEM_INIT, they can be restored to the active codebase from the 4.7 branch. chips: soc/intel/sch Mainboards: mainboard/iwave/iWRainbowG6 Change-Id: Ida0570988a23fd0d13c6fcbe54f94ab0668c9eae Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/22027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-05Move ADDR32() hack to arch/x86Patrick Georgi
It's arch specific, so no need to pollute non-x86 with it. Change-Id: I99ec76d591789db186e8a33774565e5a04fc4e47 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/21392 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-02cpu/x86/smm: Fix explicit 'addr32' usage in clang buildsEdward O'Callaghan
The addr32 prefix is required by binutils, because even when given an explicit address which is greater than 64KiB, it will throw a warning about truncation, and stupidly emit the opcode with a 16-bit addressing mode and the wrong address. However, in the case of LLVM, this doesn't happen, and is happy to just use 32-bit addressing whenever it may require it. This means that LLVM never really needs an explicit addr32 prefix to use 32-bit addressing in 16-bit mode. Change-Id: Ia160d3f7da6653ea24c8229dc26f265e5f15aabb Also-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-08-31AGESA: Remove separate f15rlKyösti Mälkki
Change-Id: I18c62ad034249c5ad14e5d5e708b4f0d4bcbf400 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-31cpu/x86 asm: Just use the correct op suffixEdward O'Callaghan
LLVM AS doesn't support as much GNU junk extensions, data16/32 is almost never needed in truth if we just use the correct op suffix. So do that here, fixes clang/llvm builds with the integrated-as toggled on. Change-Id: I6095d03d0289b418a49a10f135de5eb0e117cae0 Also-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-21I82801JX: Add IS_ENABLED around config optionsMartin Roth
This chipset was just added and had a few places that needed to be fixed. Change-Id: Ief048c4876c5a2cb538c9cb4b295aba46a4fff62 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20684 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-07-21sb/intel/i82801jx: Add correct PCI ids and change namesArthur Heymans
Change-Id: Ic9226098dafa2465aa5fccc72c442de2b94e44c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-13src/cpu: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: I4e5e585c3f98a129d89ef38b26d828d3bfeac7cf Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-27cpu/x86/smm: allow SSE instructions in SMM modulesAaron Durbin
If SSE instructions are enabled in the build assume the SMM modules are compiled with SSE instructions. As such enable the SSE instructions in SMM mode by setting up the cr4 register. In addition, provide a place to save and restore the SSE state in both the relocation handler and permanent handler. Change-Id: Ifa16876b57544919fde88fba5b8f18e4ca286841 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20244 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-22cpu/x86/smm: use macros for CR0 flagsAaron Durbin
Use the existing macros for CR0 to set the flags in the SMM stub. Change-Id: I0f02fd6b0c14cee35ec33be2cac51057d18b82c0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20242 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-22cpu/x86/smm: fix up types in module loaderAaron Durbin
For sizes and dimensions use size_t. For pointer casts use uintptr_t. Also, use the ALIGN_UP macro instead of open coding the operation. Change-Id: Id28968e60e51f46662c37249277454998afd5c0d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20241 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-19cpu/x86/smm/smihandler: Apply cosmetic changesPatrick Rudolph
Use define for SSA base address. Move EM64T area to 0x7c00 and add reserved area of size 0x100, as there's no indication that the address 0x7d00 exists on any platform. No functional change. Change-Id: I38c405c8977f5dd571e0da3a44fcad4738b696b2 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-16cpu/x86: Fix misc. remaining issues detected by checkpatchLee Leahy
Fix the following error and warnings detected by checkpatch.pl: ERROR: trailing statements should be on next line WARNING: storage class should be at the beginning of the declaration WARNING: type 'long unsigned int' should be specified in [[un]signed] [short|int|long|long long] order TEST=Build and run on Galileo Gen2 Change-Id: I9cfe42cf1836cfd40ffcf67237c818543f508feb Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18845 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-16cpu/x86: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: line over 80 characters TEST=Build and run on Galileo Gen2 Change-Id: I56ea28826963403dc0719f40c13782c56dc97feb Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18844 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-16cpu/x86: Use tabs for indentLee Leahy
Fix the following error and warning detected by checkpatch.pl: ERROR: code indent should use tabs where possible WARNING: please, no spaces at the start of a line TEST=Build and run on Galileo Gen2 Change-Id: Ie6e4dd4c3eb0d2c44ecd008740dfc348d496fe78 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18841 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-16cpu/x86: Fix various issues detected by checkpatch.plLee Leahy
Fix the following errors and warning detected by checkpatch.pl: ERROR: spaces required around that '=' (ctx:VxV) ERROR: space prohibited after that open parenthesis '(' ERROR: need consistent spacing around '|' (ctx:WxV) ERROR: need consistent spacing around '|' (ctx:VxW) ERROR: spaces required around that '=' (ctx:VxV) ERROR: spaces required around that '==' (ctx:VxV) ERROR: spaces required around that ':' (ctx:ExV) WARNING: space prohibited between function name and open parenthesis '(' TEST=Build and run on Galileo Gen2 Change-Id: I61d08055b207c607d5b7d72b0094ad8e24fbd106 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18840 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-22src/cpu/x86: Update/Add license headers to all filesMartin Roth
Change-Id: I436bf0e7db008ea78e29eaeef10bea101e6c8922 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18405 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-11x86 SMM: Fix use with RELOCATABLE_RAMSTAGEKyösti Mälkki
The value for _size was not evaluated correctly if ramstage is relocated, make the calculation runtime. While touching it, move symbol declarations to header file. Change-Id: I4402315945771acf1c86a81cac6d43f1fe99a2a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08buildsystem: Drop explicit (k)config.h includesKyösti Mälkki
We have kconfig.h auto-included and it pulls config.h too. Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-04src/cpu: Improve code formattingElyes HAOUAS
Change-Id: I17d5efe382da5301a9f5d595186d0fb7576725ca Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16391 Tested-by: build bot (Jenkins) Reviewed-by: Andrew Wu <arw@dmp.com.tw> Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-08-23src/cpu: Capitalize CPU, APIC and IOAPIC typo fixElyes HAOUAS
Change-Id: I82e0736dc6b44cfcc57cdfdc786c85c4b6882260 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16276 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-07-31src/cpu: Capitalize CPUElyes HAOUAS
Change-Id: I58d5c16de796a91fa14d8db78722024266c09a94 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15934 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17intel/sch: Merge northbridge and southbridge in src/socStefan Reinauer
Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14599 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-05-04cpu/x86: remove BACKUP_DEFAULT_SMM_REGION optionAaron Durbin
Unconditionally provide the backup default SMM area API. There's no reason to guard the symbols behind anything since linker garbage collection is implemented. A board or chipset is free to use the code or not without needing to select an option. Change-Id: I14cf1318136a17f48ba5ae119507918190e25387 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14561 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04cpu/x86/smm_module_loader: always build with SMM module supportAaron Durbin
The SMM module loader code was guarded by CONFIG_SMM_TSEG, however that's not necessary. It's up to the chipset to take advantage of the SMM module loading. It'll get optimized out if the code isn't used anyway so just expose the declarations. Change-Id: I6ba1b91d0c84febd4f1a92737b3d7303ab61b343 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14560 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-01-28Move object files to $(obj)/<class>/Nico Huber
Instead of tagging object files with .<class>, move them to a <class> directory below $(obj)/. This way we can keep a 1:1 mapping between source- and object-file names. The 1:1 mapping is a prerequisite for Ada, where the compiler refuses any other object-file name. Tested by verifying that the resulting coreboot.rom files didn't change for all of Jenkins' abuild configurations. Change-Id: Idb7a8abec4ea0a37021d9fc24cc8583c4d3bf67c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13181 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-01-28Makefile: Make full use of src-to-obj macroNico Huber
There were several spots in the tree where the path to a per class object file was hardcoded. To make use of the src-to-obj macro for this, it had to be moved before the inclusion of subdirs. Which is fine, as it doesn't have dependencies beside $(obj). Tested by verifying that the resulting coreboot.rom files didn't change for all of Jenkins' abuild configurations. Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13180 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-24Unify OBJCOPY arguments throughout various x86 stagesStefan Reinauer
Instead of having to have an ifeq() all across the code base, use $(target-objcopy). And correct target-objcopy to a value that objcopy actually understands. Change-Id: Id5dea6420bee02a044dc488b5086d109e806d605 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11090 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30smm: 64bit fixesStefan Reinauer
Change-Id: I35dab4e66514948aafa912d993fb8d42c5a520a0 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11089 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-29smmhandler: on i945..nehalem, crash if LAPIC overlaps with ASEGPatrick Georgi
This mitigates the Memory Sinkhole issue (described on https://github.com/xoreaxeaxeax/sinkhole) by checking for the issue and crashing the system explicitly if LAPIC overlaps ASEG. This needs to happen without a data access (only code fetches) because data accesses could be tampered with. Don't try to recover because, if somebody tried to do shenanigans like these, we have to expect more. Sandybridge is safe because it does the same test in hardware, and crashes. Newer chipsets presumably do the same. This needs to be extended to deal with overlapping TSEG as well. Change-Id: I508c0b10ab88779da81d18a94b08dcfeca6f5a6f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11519 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-09-09linking: add and use LDFLAGS_commonAaron Durbin
Add an LDFLAGS_common variable and use that for each stage during linking within all the architectures. All the architectures support gc-sections, and as such they should be linking in the same way. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built rambi and analyzed the relocatable ramstage. Change-Id: I41fbded54055455889b297b9e8738db4dda0aad0 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11522 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2015-09-09rmodule: use program.ld for linkingAaron Durbin
Bring rmodule linking into the common linking method. The __rmodule_entry symbol was removed while using a more common _start symbol. The rmodtool will honor the entry point found within the ELF header. Add ENV_RMODULE so that one can distinguish the environment when generating linker scripts for rmodules. Lastly, directly use program.ld for the rmodule.ld linker script. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built rambi and analyzed the relocatable ramstage, sipi_vector, and smm rmodules. Change-Id: Iaa499eb229d8171272add9ee6d27cff75e7534ac Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11517 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-08x86 SMM: Relocator is intel-onlyKyösti Mälkki
Change-Id: I78519b8f060b1ba81e8b9c7c345820180a14f2fe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10441 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-29x86 SMM: Merge recipesKyösti Mälkki
Change-Id: I35244ebd56e1653109f7cf68ed26a42035c17cc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10367 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-29x86 SMM: We have single SMM linker script nowKyösti Mälkki
Change-Id: I0c20b674b536a2964962f84228f681b53dc114dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10366 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2015-05-29smm: Remove dead smm_tseg.ldVladimir Serbinenko
Change-Id: I231e59d3b9c3ebf6e058917613221892fc880fa1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10365 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-29smmrelocate: Remove dead TSEG code.Vladimir Serbinenko
Change-Id: I786dd8295d310bfd21db49cfbe5ea39675b25b68 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10361 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-28smm: Merge configs SMM_MODULES and SMM_TSEGVladimir Serbinenko
SMM_TSEG now implies SMM_MODULES and SMM_MODULES can't be used without SMM_TSEG Remove some newly dead code while on it. Change-Id: I2e1818245170b1e0abbd853bedf856cec83b92f2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10355 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-28Migrate fsp_206ax to SMM_MODULESVladimir Serbinenko
This gets rid of ugly tseg_relocate for fsp_bd82x6x. This is adaptation of a3e41c089602c58409e8dfd4aceecbdd7d4f4a5b Change-Id: I4e80e6e98d3a6da3e3e480e9368fae1b3ed67cd6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10353 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-28Migrate 2065x to SMM_MODULESVladimir Serbinenko
This gets rid of ugly tseg_relocate for ibexpeak. This is backport of 29ffa54969414b833de5c61b507b061f920d650b to ibexpeak. Change-Id: I456d85abdbadb2fdccf77ca771e2518cf8b8c536 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10352 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-28Migrate 206ax to SMM_MODULESVladimir Serbinenko
This gets rid of ugly tseg_relocate for bd82x6x. This is backport of 29ffa54969414b833de5c61b507b061f920d650b to bd82x6x. Change-Id: I0f52540851ce8a7edaac257a2aa83d543bb5e530 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10351 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-20build system: use archives, not linker action to shorten command linesPatrick Georgi
Intermediate linking may distort linker behavior (in particular related to weak symbols). The idea is that archives are closer to 'just a list of object files', and ideally makes the linker more predictable. Using --whole-archive, the linker doesn't optimize out object files just because their symbols were already provided by weak versions. However it shouldn't be used for libgcc, because that one has some unexpected side-effects. Change-Id: Ie226c198a93bcdca2d82c02431c72108a1c6ea60 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10139 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-05-19x86: garbage collect SMM programsAaron Durbin
The non-module SMM programs were not being garbage collected during linking. Do this so that one doesn't have to add dependencies for unused functions in SMM. TEST=Interrogated readelf -e smm.elf on both builds as well as diffed the symbol table. Runtime testing was not done. Change-Id: I31991496d92191e540df6340c587eec09c7022b3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10219 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-28Makefile x86 SMM: Move smm_wrap recipesKyösti Mälkki
This is not used together with SMM_MODULES. Change-Id: I52621787cfa5a9e3863c150ce64f62aceb423eb4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10014 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-04-06build system: run linker scripts through the preprocessorPatrick Georgi
This allows combining and simplifying linker scripts. This is inspired by the commit listed below, but rewritten to match upstream, and split in smaller pieces to keep intent clear. Change-Id: Ie5c11bd8495a399561cefde2f3e8dd300f4feb98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org> Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170 Reviewed-on: http://review.coreboot.org/9303 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-04build system: Introduce manual file typePatrick Georgi
It's used for files with custom build rules, eg. the objcopy stuff surrounding smm and sipi_vector. Change-Id: Ie9ab4c9c6008ca42f82f768c5f33f90c7f5f4db5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9287 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-02build system: extend src-to-obj for non-.c/.S filesPatrick Georgi
It also creates file names in the build directory and with the stage sliced in, but keeps the extension for anything not .c or .S. Also some handling for non-.c/.S files was adapted to match. This is inspired by the commit listed below, but rewritten to match upstream, and split in smaller pieces to keep intent clear. Change-Id: If8f89a7daffcf51f430b64c3293d2a817ae5120f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org> Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170 Reviewed-on: http://review.coreboot.org/9175 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-03-30x86: fix SMM programs linked with gc-sectionsAaron Durbin
Commit f69a99db (coreboot: x86: enable gc-sections) added gc-sections to the linker command line. The SMM-specific linker scripts were not interrogated to see if all the sections were being included properly. .data, .bss, and .sbss did not have the proper globs set to put the SMM programs in the expected order. Lastly, explicitly set the ENTRY for the SMM programs. Change-Id: Ibb579d18d4819af666d6ec7dfc30776e8c404b71 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9160 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-30x86/smm: Move SMM configuration out of generic MakefilePatrick Georgi
It's x86 specific. This is inspired by the commit listed below, but rewritten to match upstream, and split in smaller pieces to keep intent clear. Change-Id: Iacb91b47c89041435dd27c2c9ad34a231adf21d2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org> Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170 Reviewed-on: http://review.coreboot.org/9115 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-17Makefile.inc: Use -Og when compiling with GDB supportStefan Reinauer
From GCC's documentation: Optimize debugging experience. -Og enables optimizations that do not interfere with debugging. It should be the optimization level of choice for the standard edit-compile-debug cycle, offering a reasonable level of optimization while maintaining fast compilation and a good debugging experience. Change-Id: I9a3dadbf8e894cb28e29d7b2f4e9add252e7bbb3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/8689 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-11x86 SMM: Replace weak prototypes with weak function stubKyösti Mälkki
Change-Id: I682617cd2f4310d3e2e2ab6ffec51def28a4779c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7961 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-01-09x86: Initialize drivers in SMM context if neededDavid Hendricks
This adds a block in the SMI handler to call init functions for drivers which may be used in SMM. A static variable is used to ensure the init functions are only called once. BUG=chrome-os-partner:29580 BRANCH=mccloud TEST=Built and booted on mccloud, system no longer hangs when pressing power button at the dev mode screen. Also tested on parrot. Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I225f572f7b3072bec2bc06aac3fb50d90a2e30ee Original-Reviewed-on: https://chromium-review.googlesource.com/204764 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 9315c485deb5f24df753e2d69f4819b2cb6accc2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8d2b21765c35c7ac7746986d5334dca17dcd6861 Reviewed-on: http://review.coreboot.org/8134 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-30Unify remaining binutils invocationsPatrick Georgi
No need to pass calls through gcc in one case and directly to binutils in another. Just always call binutils. Change-Id: Icf9660ce40d3c23f96dfab6a73c169ff07d3e42b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7610 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-27cpu/amd/agesa/family15rl: Provide Richland CPU supportEdward O'Callaghan
Richland - Microarchitecture: Piledriver Core stepping: RL-A1 CPUID: 610F31 Change-Id: I790085fbf36d836c903dcce77d794abb8578712b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7537 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-25build system: unify linker use across gcc and clangPatrick Georgi
Let's just call ld directly for gcc, too. Change-Id: I305eb92ed0d21b098134a7eb5a9f9fe3b126aeea Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/7553 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-25build system: use a single variable name for compiler runtimesPatrick Georgi
We build with either gcc or clang, no need to keep both around Change-Id: I9af2cc7636bdc791a68ba8ed6e7c5a81973c5dfd Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/7552 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-11cpu/x86/smm/Makefile.inc: Fix up linkage rulesEdward O'Callaghan
Broken linkage rule for Clang builds on one side of a branch. Hence refactor out common rules from branch. Change-Id: I00e5a2f5f9af1b7882a453caebb378ef74d2d51e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7425 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-28cpu/x86/smm/Makefile.inc: Correct SMM linkage under clang buildsEdward O'Callaghan
Ensure that the SMM build stage links properly using the compiler-rt runtime under a Clang build. Change-Id: Iead28c46d63f5bbb27757b7dc66fe06b4813d03c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6462 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-30sandybridge: Add native sandybridgeVladimir Serbinenko
Change-Id: I1b51310b4387e588c4828563620b0e2770598503 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6753 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-11x86/smm/smihandler.c: break case in switchPatrick Georgi
The case doesn't look like a deliberate fall-through, since the next case (SNB/IVB/HSW) is more specific than the one before it, so break out. Change-Id: I55497aefe9e835842a82121270f2b2a9952f560d Found-by: Coverity Scan Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6571 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-11coreboot classes: Add dynamic classes to corebootFurquan Shaikh
Provide functionality to create dynamic classes based on program name and architecture for which the program needs to be compiled/linked. define_class takes program_name and arch as its arguments and adds the program_name to classes-y to create dynamic class. Also, compiler toolset is created for the specified arch. All the files for this program can then be added to program_name-y += .. Ensure that define_class is called before any files are added to the class. Check subdirs-y for order of directory inclusion. One such example of dynamic class is rmodules. Multiple rmodules can be used which need to be compiled for different architectures. With dynamic classes, this is possible. Change-Id: Ie143ed6f79ced5f58c200394cff89b006bc9b342 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/6426 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-29sandy/ivybridge: Native raminit.Vladimir Serbinenko
Based on damo22's work and my X230 tracing. Works for my X230 in a variety of RAM configs. Also-By: Damien Zammit <damien@zamaudio.com> Change-Id: I1aa024c55a8416fc53b25e7123037df0e55a2769 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/5786 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-28Don't add .eh_frame sections to SMM imagePatrick Georgi
We don't need exception handlers and they waste space. Change-Id: I98a34d1c9638e8c4168edbfb4b1cddde8a64623f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6105 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-21Misc: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: I46906e6d68775edc5cfe199cfeb465db4da2691f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6072 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-19build: use CFLAGS_* in more places where they're neededPatrick Georgi
After moving out -m32 from CC_*, 64bit compilers need CFLAGS_* in more places to handle everything in 32bit as appropriate. Change-Id: I692a46836fc0ba29a3a9eb47b123e3712691b45d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5789 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18console: Use romstage code for ramstage and SMMKyösti Mälkki
Console is arch-agnostic and there is no need for separate implementations for romstage and ramstage. For SMM there is console only if DEBUG_SMI is selected. Change-Id: I7028eeeff8bfbb9c8552972436b29a7508834d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5338 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-16cpu/amd/agesa/family15tn: Add initial support for SMM modeAlexandru Gagniuc
This is the minimal setup needed to be able to execute SMI handlers. Only support for ASEG handlers is added, which should be sufficient for Trinity (up to 4 cores). There are a few hacks which need to be introduced in generic code in order to make this work properly, but these hacks are self-contained. They are a not a result of any special needs of this CPU, but rather from a poorly designed infrastructure. Comments are added to explain how such code could be refactored in the future. Change-Id: Iefd4ae17cf0206cae8848cadba3a12cbe3b2f8b6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5493 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-09console: Move newline translation outside console_tx_byteKyösti Mälkki
This gives us completely transparent low-level function to transmit data. Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5336 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09uart: Redefine Kconfig optionsKyösti Mälkki
Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-20rmodules: use rmodtool to create rmodulesAaron Durbin
Start using the rmodtool for generating rmodules. rmodule_link() has been changed to create 2 rules: one for the passed in <name>, the other for creating <name>.rmod which is an ELF file in the format of an rmodule. Since the header is not compiled and linked together with an rmodule there needs to be a way of marking which symbol is the entry point. __rmodule_entry is the symbol used for knowing the entry point. There was a little churn in SMM modules to ensure an rmodule entry point symbol takes a single argument. Change-Id: Ie452ed866f6596bf13f137f5b832faa39f48d26e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5379 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-03-04SMM: Only have console with DEBUG_SMIKyösti Mälkki
Existing code compiled serial communication and printk() for SMM even when DEBUG_SMI was not selected. Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5142 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-03-04uart8250mem: Unify calls with generic UARTKyösti Mälkki
NOTE: UART base for SMM continues to be broken, as it does not use the address resource allocator has assigned. Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250io: Unify calls with generic UARTKyösti Mälkki
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-20SMM: Fixes for DEBUG_SMIKyösti Mälkki
Get the required UART includes directly. The ne2k part is old copy-paste leftover. Change-Id: Ifd9253abb5a50b515887459faf06b63f907eeda9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5258 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-16x86: provide infrastructure to backup default SMM regionAaron Durbin
Certain CPUs require the default SMM region to be backed up on resume after a suspend. The reason is that in order to relocate the SMM region the default SMM region has to be used. As coreboot is unaware of how that memory is used it needs to be backed up. Therefore provide a common method for doing this. Change-Id: I65fe1317dc0b2203cb29118564fdba995770ffea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5216 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-12-04Update SMM for FSP systemsMarc Jones
Add the FSP northbridge and southbridge includes. Change-Id: I5c7f395dc033caa8d0bf0313382769595d77f2a5 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4019 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-25Support for nehalem northbridgeVladimir Serbinenko
Including raminit Change-Id: If1dd3855181481b8b928adf0fdb40b29d15897db Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4044 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25Support for Ibexpeak southbridgeVladimir Serbinenko
Part of X201 port. Change-Id: If17d707004aba9f08459dbd8f3a146fa3c076aa9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4052 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
With the LynxPoint chipset there are more than 16 possible GPIOs that can trigger an SMI so we need a mainboard handler that can support this. There are only a handful of users of this function so just change them all to use the new prototype. Change-Id: I3d96da0397d6584f713fcf6003054b25c1c92939 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49530 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4145 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-08-23usbdebug: Do not support logging from SMMKyösti Mälkki
Letting SMI handler touch EHCI controller is an excellent source of USB problems. Remove usbdebug entirely from SMM. It may be possible to make usbdebug console work from SMM after hard work and coordination with payloads and even OS drivers. But we are not there. Change-Id: Id50586758ee06e8d76e682dc6f64f756ab5b79f5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3858 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-07-11cpu: Fix spellingMartin Roth
Change-Id: I69c46648de0689e9bed84c7726906024ad65e769 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13Revert "Add support for Intel Ibex Peak (Mobile 5) southbridge"Stefan Reinauer
This reverts commit 0210119b4b95e84f954cfd6dc11aafbc187421af Change-Id: I5be3f2a54394c592650a0dcd671e4a72ae796cb2 Reviewed-on: http://review.coreboot.org/3443 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-12Add support for Intel Ibex Peak (Mobile 5) southbridgeStefan Reinauer
Change-Id: If56f2cacc5f1b2ef9c7b6aea508d458a43dd1309 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3397 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18SMM: link against libgccStefan Reinauer
The non-relocatable SMM code was changed to link against libgcc a while back so that printk could use built-in division instead of a hand crafted div() function. However, the relocatable SMM code was not adapted by mistake. This patch links the relocatable SMM against libgcc, too, so we can enable it for Haswell. Change-Id: Ia64a78e2e62348d115ae4ded52d1a02c74c5cea4 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2727 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18haswell: Use SMM ModulesAaron Durbin
This commit adds support for using the SMM modules for haswell-based boards. The SMI handling was also refactored to put the relocation handler and permanent SMM handler loading in the cpu directory. All tseg adjustment support is dropped by relying on the SMM module support to perform the necessary relocations. Change-Id: I8dd23610772fc4408567d9f4adf339596eac7b1f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2728 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14x86: SMM Module SupportAaron Durbin
Add support for SMM modules by leveraging the RMODULE lib. This allows for easier dynamic SMM handler placement. The SMM module support consists of a common stub which puts the executing CPU into protected mode and calls into a pre-defined handler. This stub can then be used for SMM relocation as well as the real SMM handler. For the relocation one can call back into coreboot ramstage code to perform relocation in C code. The handler is essentially a copy of smihandler.c, but it drops the TSEG differences. It also doesn't rely on the SMM revision as the cpu code should know what processor it is supported. Ideally the CONFIG_SMM_TSEG option could be removed once the existing users of that option transitioned away from tseg_relocate() and smi_get_tseg_base(). The generic SMI callbacks are now not marked as weak in the declaration so that there aren't unlinked references. The handler has default implementations of the generic SMI callbacks which are marked as weak. If an external compilation module has a strong symbol the linker will use that instead of the link one. Additionally, the parameters to the generic callbacks are dropped as they don't seem to be used directly. The SMM runtime can provide the necessary support if needed. Change-Id: I1e2fed71a40b2eb03197697d29e9c4b246e3b25e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2693 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14haswell: Add initial support for Haswell platformsAaron Durbin
The Haswell parts use a PCH code named Lynx Point (Series 8). Therefore, the southbridge support is included as well. The basis for this code is the Sandybridge code. Management Engine, IRQ routing, and ACPI still requires more attention, but this is a good starting point. This code partially gets up through the romstage just before training memory on a Haswell reference board. Change-Id: If572d6c21ca051b486b82a924ca0ffe05c4d0ad4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2616 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-08Eliminate do_div().David Hendricks
This eliminates the use of do_div() in favor of using libgcc functions. This was tested by building and booting on Google Snow (ARMv7) and Qemu (x86). printk()s which use division in vtxprintf() look good. Change-Id: Icad001d84a3c05bfbf77098f3d644816280b4a4d Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2606 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-27smm: Update rev 0x30101 SMM revision save stateAaron Durbin
According to both Haswell and the SandyBridge/Ivybridge BWGs the save state area actually starts at 0x7c00 offset from 0x8000. Update the em64t101_smm_state_save_area_t structure and introduce a define for the offset. Note: I have no idea what eptp is. It's just listed in the haswell BWG. The offsets should not be changed. Change-Id: I38d1d1469e30628a83f10b188ab2fe53d5a50e5a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2515 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-27intel/i82801ix: new southbridge, ICH9Patrick Georgi
Add support for ICH9 southbridge Change-Id: I70612431101bf48d9dcc96ee1b37d257c9ad2ee2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1690 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-26USBDEBUG: buffer up to 8 bytesSven Schnelle
EHCI debug allows to send message with 8 bytes length, but we're only sending one byte in each transaction. Buffer up to 8 bytes to speed up debug output. Change-Id: I9dbb406833c4966c3afbd610e1b13a8fa3d62f39 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1357 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>