summaryrefslogtreecommitdiff
path: root/src/cpu/samsung
AgeCommit message (Expand)Author
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
2013-02-20Whitespace: Replace tab character in license text with two spacesPaul Menzel
2013-02-20armv7: Don't let users set ram parameters that are fixed in hardware.Ronald G. Minnich
2013-02-20ARMV7: minor tweaks to inter-stage calling and payload handling.Ronald G. Minnich
2013-02-19exynos5250: add uartmem_getbaseaddr() in uart driverDavid Hendricks
2013-02-19armv7/snow: add CPU and RAM resources via allocatorDavid Hendricks
2013-02-16exynos5250: clean out some stale IRAM-related config variablesDavid Hendricks
2013-02-16armv7/exynos5250: fix usage of _stack and _estackDavid Hendricks
2013-02-15ARMv7: Drop u-boot type remainsStefan Reinauer
2013-02-15Exynos5250: Drop unused file ehci-s5p.hStefan Reinauer
2013-02-15Exynos: Drop dead code in cpu.hStefan Reinauer
2013-02-15ARMv7: straighten out reset codeStefan Reinauer
2013-02-15Exynos5: Drop S5P directory and merge filesStefan Reinauer
2013-02-15Exynos: Drop unused include filesStefan Reinauer
2013-02-14Exynos: Drop duplicate copy of watchdog.hStefan Reinauer
2013-02-14ARMv7: Drop SKIP_LOWLEVEL_INITStefan Reinauer
2013-02-14Exynos5250: Drop SHA implementationStefan Reinauer
2013-02-13armv7/exynos: remove some stale files leftover from initial importDavid Hendricks
2013-02-11armv7/exynos5250/snow: deprecate CONFIG_{RAMBASE,RAMTOP}David Hendricks
2013-02-10armv7/snow: Remove unused modules in bootblock and romstage.Hung-Te Lin
2013-02-10exynos/snow: move SPI GPIO setup to mainboard bootblock codeDavid Hendricks
2013-02-10exynos/snow: set SPI clock rate in romstage mainDavid Hendricks
2013-02-10armv7/exynos5250: place .id between .start and bootblock mainDavid Hendricks
2013-02-09armv7/exynos: make BL1_SIZE_KB consistent with numbers used...David Hendricks
2013-02-09armv7/snow: add BL1_SIZE_KB and get rid of magic constantsDavid Hendricks
2013-02-08armv7: Use same console initialization procedure for all ARM stagesHung-Te Lin
2013-02-08console: Always allow setting "EARLY_CONSOLE" configuration.Hung-Te Lin
2013-02-08exynos/snow: Configure UART peripheral during console initialization.Hung-Te Lin
2013-02-08console: Revise serial console configuration names.Hung-Te Lin
2013-02-07armv7/snow: Remove power_init from bootblock.Hung-Te Lin
2013-02-07armv7: Clean up arm/snow bootblock build process.Hung-Te Lin
2013-02-06armv7: Clean up: remove deprecated SPL.Hung-Te Lin
2013-02-06armv7: Prevent CBFS data overlapping bootblock.Hung-Te Lin
2013-02-06exynos/snow: Move core/memory clock-related and board ID codeDavid Hendricks
2013-02-06snow: use bootblock build class for I2C codeDavid Hendricks
2013-02-06snow: use bootblock build class for GPIODavid Hendricks
2013-02-06exynos5250: Move the ID section againDavid Hendricks
2013-02-05snow: use bootblock build class for UART codeDavid Hendricks
2013-02-05exynos: de-duplicate UART header contentDavid Hendricks
2013-02-04exynos5250: make lowlevel_init_c.c benignDavid Hendricks
2013-02-04exynos/snow: get rid of board-specific arbitration codeDavid Hendricks
2013-02-04exynos/snow: partial clean-up of snow bootblock using build classDavid Hendricks
2013-02-04exynos/s5p: Add helper function for reading a single MVL3 GPIODavid Hendricks
2013-02-03exynos5250: remove CPU check from samsung_get_base_* macroDavid Hendricks
2013-02-03armv7: Add 'bootblock' build class.Hung-Te Lin
2013-02-01exynos5250: hard-code array index for memory timingsDavid Hendricks
2013-02-01exynos5250: #define the dram controller interleaving sizeDavid Hendricks
2013-01-30Exynos5250: Get DDR3 working by changing what is compiled and add a functionRonald G. Minnich
2013-01-30armv7: Add SPI driver for Exynos.Hung-Te Lin
2013-01-30Extend CBFS to support arbitrary ROM source media.Hung-Te Lin
2013-01-29Exynos5250: change all unsigned with no type to 'unsigned int'Ronald G. Minnich
2013-01-29Exynos5250: add debug prints to DDR3 startup code.Ronald G. Minnich
2013-01-29Exynos5250: make vendor enums in the timing array more debuggable.Ronald G. Minnich
2013-01-29armv7: Clean up the mmu setup a bitRonald G. Minnich
2013-01-29armv7: nuke global_data.h and remove some references to gd structDavid Hendricks
2013-01-19armv7/snow: get to romstageDavid Hendricks
2013-01-18Snow bootblock (bloated/debug version)David Hendricks
2013-01-17bootblock_cpu_init() stub for exynos5250David Hendricks
2013-01-17ARM bootblock approachDavid Hendricks
2013-01-11exynos5250: Hacked up lowlevel_init_cDavid Hendricks
2013-01-11exynos5250: Temporarily remove intermediate rule in MakefileDavid Hendricks
2013-01-10armv7: update board_init_f function signatureDavid Hendricks
2013-01-10armv7: delete some unused filesDavid Hendricks
2013-01-10exynos5250: clean-ups for clock_initDavid Hendricks
2013-01-10exynos5250: un-comment a lot of code which was left out earlierDavid Hendricks
2013-01-05ARMv7: drop __ASSEMBLY__Stefan Reinauer
2013-01-04cleanup some exynos5250 uart codeDavid Hendricks
2013-01-04make early serial console support more genericDavid Hendricks
2013-01-03snow: Stuff to support building image with BL1David Hendricks
2013-01-03Add (hacked-up) s3c24x0_i2c filesDavid Hendricks
2013-01-03import SPL files for board_i2c_{claim,release}_bus()David Hendricks
2012-12-29move iRAM config variable to exynos5250 KconfigDavid Hendricks
2012-12-12Fix up Maxim MAX77686 driverStefan Reinauer
2012-12-11Remove un-needed i2c.h includeRonald G. Minnich
2012-12-11Correct the location of the include fileRonald G. Minnich
2012-12-10Removed an unneeded include fileRonald G. Minnich
2012-12-08WIP: Initial support for Samsung Exynos 5250 ARM CPUStefan Reinauer
2012-12-01Add include files for samsung s5p-commonRonald G. Minnich
2012-11-29Minor changes to .h files for samsung ARM partRonald G. Minnich
2012-11-28add .h files for common exynos 5Ronald G. Minnich
2012-11-28Add .h files for samsung exynos 5250Ronald G. Minnich
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 08:58:41 +0000