| Age | Commit message (Collapse) | Author |
|---|
|
The Exynos family and most ARM products are SoC, not just CPU.
We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.
Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The UART / serial console is put in retention state by kernel during suspend /
resume path, which caused Coreboot not able to print any messages during resume.
Sending values to the padret_uart_opt inside PMU may release UART, but that may
also cause unexpected output when kernel is back. However, it's still very
helpful when we are debugging suspend/resume inside Coreboot.
To get UART message on resume, call wakeup_enable_uart() in boot block or
romstage (before console_init).
Change-Id: Ib5759cb402c6e018d9dba14fad8b61f6a1b1a265
Reviewed-on: https://chromium-review.googlesource.com/170440
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 547fbbfe2eeb6da4e161f36be2caf8099f9eac9b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6649
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
When starting the Exynos5250 port, a lot of unneeded u-boot code
was imported. This is an attempt to get rid of a lot of unneeded
code before the port is used as a basis for further ARM ports.
There is a lot more that can be done, including cleaning up the
5250's Kconfig file.
Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3642
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch unfortunately incorporates a number of changes,
all of which are making future ARM ports easier.
- drop cruft that came in with u-boot
- move serial console from mainboard Kconfig to Exynos Kconfig
- factor out non-board specific wakeup code
- move generic bootblock code from mainboard to Exynos
- actually call arch_cpu_init()
- remove dead code
- fix up copyright messages
- remove snow_ prefix from a lot of code to reduce the noise
when creating a new mainboard based on that code.
Change-Id: Ic05326edf5a7e1a691c5ff841a604cb9e351b562
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3640
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
