summaryrefslogtreecommitdiff
path: root/src/cpu/intel
AgeCommit message (Collapse)Author
2012-07-04Intel cpus: Extend cache to cover complete Flash DeviceKyösti Mälkki
CACHE_ROM_SIZE default is ROM_SIZE, the Flash device size set in menuconfig. This fixes a case where 8 MB SPI flash MTRR setup would not cover the bottom 4 MB when ramstage is decompressed. Verify CACHE_ROM_SIZE is power of two. One may set CACHE_ROM_SIZE==0 to disable this cache. Change-Id: Ib2b4ea528a092b96ff954894e60406d64f250783 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1146 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-04Intel model_106cx: change CAR to model_6exKyösti Mälkki
Diff between model_106cx and model_6ex CAR codes suggests currently used model_106cx CAR is not optimal - destination RAM and source ROM of ramstage copy_and_run are only partly set cacheable. It appears variable MTRR setting for XIP cache is left enabled on model_106cx code, where it should have extended to cover all of Flash. Introduces untested functional change on boards: intel/d945gclf iwave/iWRainbowG6 Deletes file: model_106cx/cache_as_ram.inc Change-Id: I35229f8433927e83821e72e9d9a9fc8fb09c3f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/642 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-04Intel cpus: delete dead CAR code and whitespace fixesKyösti Mälkki
A diff from model_6fx to model_106cx suggests there is little CORE2 specific code that was once considered useful to have. In its current status however, sockets supporting model_6fx use model_6ex CAR init, so that specific code is actually never used. Deletes file: model_6fx/cache_as_ram.inc Change-Id: I6c0204446fa98207e31f91895e1cf30fde42382c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/640 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-04Intel cpus: use CPU_ADDR_BITS from Kconfig during CARKyösti Mälkki
Default CPU_ADDR_BITS is 36. For Atom (model_106cx) use 32. This model is known to fail execution-in-place (XIP) with the default 36. Pentium M should use 32, but doesn't even with this patch. Some Xeon and CORE(2) models should use 38 or 40. Change-Id: If604badcdc578c4f4bc7d30da2f61397ec0d754c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/639 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-07-02Use broadcast SIPI to startup siblingsSven Schnelle
The current code for initializing AP cpus has several shortcomings: - it assumes APIC IDs are sequential - it uses only the BSP for determining the AP count, which is bad if there's more than one physical CPU, and CPUs are of different type Note that the new code call cpu->ops->init() in parallel, and therefore some CPU code needs to be changed to address that. One example are old Intel HT enabled CPUs which can't do microcode update in parallel. Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1139 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-02Intel CPUs: execute microcode update only once per coreKyösti Mälkki
Early HT-enabled CPUs do not serialize microcode updates within a core. Solve this by running microcode updates on the thread with the smallest lapic ID of a core only. Also set MTRRs once per core only. Change-Id: I6a3cc9ecec2d8e0caed29605a9b19ec35a817620 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1142 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-19Enable Intel PECI on Model 6fx CPUsSven Schnelle
Those CPUs support the PECI (Platform Environment Control Interface), so enable it. This interface is commonly used for tasks like fan control. Change-Id: Id2dadc4821de8cc0b579e77235aa36892e57fd02 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1104 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-05-29Drop config variable CPU_MODEL_INDEXStefan Reinauer
It's only used in the ACPI generator for Sandybridge/Ivybridge CPUs and the code can easily be changed to not rely on any Kconfig magic. Change-Id: Ie2f92edfe8908f7eb2fda3088f77ad22f491ddcf Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1047 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-05-03Fix register corruption during Intel Microcode updateStefan Reinauer
Another bug in the Intel microcode update code that existed since we switched to LinuxBIOSv2 in 2004: The inline assembly code that reads the CPU revision from an MSR after running cpuid(1) trashes registers EBX and ECX. Only ECX was mentioned in the clobber list. C code running after this function could silently access completely wrong data, which resulted in the wrong date being printed on microcode updates (and potentially other issues happening until the C code writes to EBX again) Change-Id: Ida733fa1747565ec9824d3a37d08b1a73cd8355f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/996 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-02Don't include console.h in microcode.c when compiling with ROMCCStefan Reinauer
If microcode.c is built by romcc, this indicates that we are running microcode updates in the bootblock (e.g. before enabling cache as ram). In this case we did not enable any consoles yet, so we don't output anything. This patch removes inclusion of the unnecessary console/console.h for that case, which was breaking with certain configurations. Change-Id: Iebb57794d7b1e84cac253d249d47b88de4dd28a3 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/988 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-30Fix up Sandybridge C state generation codeStefan Reinauer
This code fixes the sandybridge C state generation code to work with the current version of the ACPI code generator. Change-Id: I56ae1185dc0694c06976236523fdcbe5c1795b01 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/950 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-30Rework ACPI CST table generationStefan Reinauer
... in order to unify the Sandybridge and Lenovo implementations currently used in the tree. - use acpi_addr_t in acpigen_write_register() - use acpi_cstate_t for cstate tables (and fix up the x60 and t60) - drop cst_entry from acpigen.h Change-Id: Icb87418d44d355f607c4a67300107b40f40b3b3f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/943 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-04-26microcode: print date of microcode and unify outputStefan Reinauer
Most subsystems print their name with a colon, and then the message. Do the same thing for the microcode update code. Also, each microcode update has a date header. Print the date from that header to make it easier to determine whether you're running the latest microcode. Change-Id: Ic22947c4b9f0502d4091d975e1f1ab42f70aa1aa Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/929 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-04-26Revamp Intel microcode update codeStefan Reinauer
- add GPLv2 + copyright header after talking to Ron - "bits" in struct microcode served no real purpose but getting its address taken. Hence drop it - use asm volatile instead of __asm__ volatile - drop superfluous wrmsr (that seems to be harmless but is still wrong) in read_microcode_rev - use u32 instead of unsigned int where appropriate - make code usable both in bootblock and in ramstage - drop ROMCC style print_debug statements - drop microcode update copy in Sandybridge bootblock Change-Id: Iec4d5c7bfac210194caf577e8d72446e6dfb4b86 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/928 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-25Replace cache control magic numbers with symbolsPatrick Georgi
Instead of opaque numbers like (1<<29), use symbols like CR0_NoWriteThrough. Change-Id: Id845e087fb472cfaf5f71beaf37fbf0d407880b5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Fix support for RAM-less multi-processor initKyösti Mälkki
Fix regression after commit: 7dfe32c5408916b6cb23f1ec48e473e1c728d300 Only align 16-bit entry on platforms that really require it, indicated by selecting SIPI_VECTOR_IN_ROM in CPU Kconfig. Disable assertion test of AP_SIPI_VECTOR for platforms not depending on this feature. Build of romstage should be fixed to get the vector address from bootblock build automatically. Change-Id: Ide470833c0254df1a9ff708369ab1c095ccfb98d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/875 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-05Add support for Intel Sandybridge CPUStefan Reinauer
Change-Id: I9f37e291c00c0640c6600d8fdd6dcc13c3e5b8d5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/855 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-03Add support for Intel Turbo Boost featureStefan Reinauer
From wikipedia: Intel Turbo Boost is a technology implemented by Intel in certain versions of their Nehalem- and Sandy Bridge-based CPUs, including Core i5 and Core i7 that enables the processor to run above its base operating frequency via dynamic control of the CPU's "clock rate". It is activated when the operating system requests the highest performance state of the processor. Change-Id: I166ead7c219083006c2b05859eb18749c6fbe832 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/844 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-02Apply cache-as-ram conditionally on socket mPGA604Kyösti Mälkki
The socket mPGA604 is for P4 Xeon which to my knowledge is always HT-enabled. I assume the existing usage of car/cache_as_ram.inc on socket_mPGA604, namely the Tyan S2735, as broken. Existing car/cache_as_ram.inc has invalid SIPI vector and it does not initialise AP CPU's to activate L2 cache. Other mPGA604 boards are not affected, as they have not been converted to CAR. Change-Id: I7320589695c7f6a695b313a8d0b01b6b1cafbb04 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/607 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Whitespace fixesPatrick Georgi
Change-Id: I441326ecbda72ec7e99fc99bf40a81aa7e94ee26 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/834 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-03-31Intel cpus: get MAXPHYADDR at runtime for new CARKyösti Mälkki
Use CPUID to get MAXPHYADDR and set MTRR masks correctly. Also only BSP CPU clears MTRRs and initializes its Local APIC. Change-Id: I89ee765a17ec7c041284ed402f21d9a969d699bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/686 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-31Intel cpus: add hyper-threading CPU support to new CARKyösti Mälkki
This improvement of CAR code starts the sibling CPU processors and clears their cache disable bits (CR0.CD) in case a hyper-threading CPU is detected. Change-Id: Ieabb86a7c47afb3e178cc75bb89dee3efe0c3d18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/604 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Intel cpus: improve CPU compatibility of new CARKyösti Mälkki
Most or many Xeons have no MSR 0x11e. I have previously tested that a HT-enabled P4 (model f25) can execute this but will not have cache-as-ram enabled. Should work for non-HT P4. Change-Id: I28cbfa68858df45a69aa0d5b050cd829d070ad66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/644 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Intel cpus: apply some good programming practices in new CARKyösti Mälkki
Delete dead CAR code and whitespace fixes. Replace cryptic 32bit hex values with existing LAPIC definitions. Do not assume state of direction flag before "rep" instruction. Do not load immediate values on temporary registers when not needed. Parameter pushed on stack was not popped (or flushed) after returning from call. This is a sort-of memory leak if multiple call's are implemented the same way. Change-Id: Ibb93e889b3a0af87b89345c462e331881e78686a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/643 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Intel cpus: cache actual size of the Flash ROM deviceKyösti Mälkki
Cache was enabled for the last 4 MB below 4 GB when ramstage is loaded. This does not cover the case of a 8 MB Flash and could overlap with some system device placed at high memory. Use the actual device size for the cache region. Mainboard may override this with Kconfig CACHE_ROM_SIZE if necessary. Change-Id: I622223b1e2af0b3c1831f3570b74eacfde7189dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/641 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-31Intel cpus: copy model_6ex CAR codeKyösti Mälkki
Copy model_6ex CAR as car/cache_as_ram_ht.inc to be extended with hyper-threading CPU support. Change-Id: I09619363e714b1ebf813932b0b22123c1d89010e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/606 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-25Intel cpus: Fix deadlock on hyper-threading initKyösti Mälkki
Only the BSP CPU was able to start its hyper-threading CPU siblings. When an AP CPU attempts this it calls start_cpu() within start_cpu(), deadlocking the system with start_cpu_lock. At the time intel_sibling_init() is run, the BSP CPU is still walking the cpu_bus linked list in lapic_cpu_init: start_other_cpus(). A sibling CPU appended at the end of this list will get started. Also fail compile with #error if SERIAL_CPU_INIT==0, as microcode updates on hyper-threading sibling CPUs must be serialized. Tested with HT-enabled P4 Xeons on dual-socket604 platform. Change-Id: I0053f58f49ed604605ce0a55e826d3e1afdc90b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/775 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-17Intel cpus: Include CAR from socketKyösti Mälkki
It was not obvious which CAR was compiled in. Also build would fail if a socket included two models with both having an include for CAR. Change-Id: I000c2e24807c3d99347a43d120333c13fbf91af4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/626 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-16Intel cpus: use CPU_PHYSMASK_HI define in CARKyösti Mälkki
Unifies models 6ex, 6fx and 106cx. Change-Id: I2bb632c7148a7d937f24eb559f7f4e539d227470 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/638 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-15Intel model_106cx: Use symbolic names for MTRR bitsKyösti Mälkki
Change-Id: I6ea5ca631c22fe870224a498b68d77d85798b3f4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/637 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-10Intel cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Note: CPU_INTEL_CORE2 was used on both model_6fx and model_1067x. Change-Id: I8fa5ba71b14dcce79ab2a2c1c69b3bc36edbdea0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/618 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-09Add Intel Socket LGA771Sven Schnelle
Change-Id: Iee7d3ff2884d8c43ff1af498160589e551bc9cc8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/492 Tested-by: build bot (Jenkins)
2012-01-10MTRR: get physical address size from CPUIDSven Schnelle
The current code uses static values for the physical address size supported by a CPU. This isn't always the right value: I.e. on model_6[ef]x Core (2) Duo CPUs physical address size is 36, while Xeons from the same family have 38 bits, which results in invalid MTRR setup. Fix this by getting the right number from CPUID. Change-Id: If019c3d9147c3b86357f0ef0d9fda94d49d811ca Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/529 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-09ACPI: mark empty get_cst_entries() weakSven Schnelle
This function prevents the linker from choosing the right get_cst_entries(), preventing writing the _CST tables. Change-Id: I4bc0168aee110171faeaa081f217dfd1536bb821 Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/496 Tested-by: build bot (Jenkins)
2011-11-01Remove XIP_ROM_BASEPatrick Georgi
The base is now calculated automatically, and all mentions of that config option were typical anyway (4GB - XIP_ROM_SIZE). Change-Id: Icdf908dc043719f3810f7b5b85ad9938f362ea40 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/366 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30Fix slow CAR execution introduced by 7c7d87182feb78cb2bc02fb3558bef56a41682c9Rudolf Marek
It is meant to be a address and not a dereference. Otherwise MTRR is filled with code and not with the address. This is what I hate at most on the AT&T syntax. Instead of taking the address, it was a dereference. Not greatly visible, except I wondered why opcode is not 0xb4 but 0xa1 and it took another half an our to see it. Change-Id: I6b339656024de8f6e6b3cde63b16b7ff5562d055 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/358 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28Get rid of AUTO_XIP_ROM_BASEPatrick Georgi
That value is now generated from a code address and CONFIG_XIP_ROM_SIZE. This works as MTRRs are fully specified by their size and any address within the range. Change-Id: Id35d34eaf3be37f59cd2a968e3327d333ba71a34 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/348 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-25SPEEDSTEP: write _CST tablesSven Schnelle
Change-Id: Idb4b57044808918de343d31519768d0986840f01 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/321 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-18Activate older Xeon P4 microcodesKyösti Mälkki
As new microcode files were included, the table was not updated with families 0f25 and 0f26. Change-Id: I5bb8be9d7c37eb8406dcb48a4b933eab24639bda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/290 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-09Crank up CPU speed on Intel Core and Core2 CPUsPatrick Georgi
The CPUs start on their slowest speed, and were left that way by coreboot. This change will speed up coreboot a bit, as well as systems that don't change the clock for whatever reason. Change-Id: Ia6225eea97299a473cf50eccc6c5e7de830b1ddc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/176 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-04cpu/intel/slot_1: Init L2 cache on SECC(2) CPUs.Keith Hui
Bring from coreboot v1 support for initializing L2 cache on Slot 1 Pentium II/III CPUs, code names Klamath, Deschutes and Katmai. Build tested on ASUS P2B-LS and P3B-F. Boot tested on P2B-LS with Pentium III 600MHz, Katmai core. Also add missing include of model_68x in slot_1, to address a similar problem fixed for model_6bx by r5945. Also change Deschutes CPU init sequence to match Katmai. Change-Id: I502e8481d1a20f0a2504685e7be16b57f59c8257 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: http://review.coreboot.org/122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-05-03Enable caching for ROM area in model_6ex/cache_as_ram.incSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6554 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14Use symbolic names for some MTRR bits instead of numbers in CAR codeStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6493 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27oops. this is weird. CAR addresses should be specified in the socket and not inStefan Reinauer
the board. I thought we did this ages ago. Also push CAR BASE further down so it won't conflict with a 32mbit flash part. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6299 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-19Revert r5902 to make code more readable again. At least three people like toStefan Reinauer
have this go away again. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Kevin O'Connor <kevin@koconnor.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6273 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-12drop unused filesStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6249 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-12fix model 106cxStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6168 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11factor out cpu power management base into a separate file. And fix a bug inStefan Reinauer
model_1067x Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6164 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08These empty files sneaked in from another patch and shouldn't have been ↵Tobias Diedrich
included in r6153, remove them. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6154 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08Tobias Diedrich wrote:Tobias Diedrich
> Definitively a iasl problem, it can't even disassemble it's own > output back to something equivalent to the input file. > It seems to be generating Bytecode for the Add where it shouldn't. Here is a solution using the SSDT. Unfortunately iasl does not resolve simple arithmetic at compile time, so we can not use Add(DEFAULT_PMBASE, PCNTRL) in the Processor statement. This patch instead dynamically generates the processor statement. I can't use the speedstep generate_cpu_entries() directly since the cpu doesn't support speedstep. For now the code is in the southbridge directory, but maybe it should go into cpu/intel/ somewhere. IIRC notebook cpus of the era can already have speedstep, so it would probably be possible to pair the i82371eb with a speedstep-capable cpu... Also, I don't know if multiprocessor boards (abit bp6?) would need to be handled differently. Abuild-tested. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6153 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08Move "select CACHE_AS_RAM" lines from boards into CPU socket.Uwe Hermann
All K8/Fam10h boards use CAR, so move the "select CACHE_AS_RAM" into the socket directories, and remove it from the individual boards. Do the same for Intel CPUs/sockets where all boards use CAR. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6151 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17Move Intel power management related defines to some central location.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6085 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18update intel microcode files.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5964 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18Make update-microcodes.sh executable.Uwe Hermann
This also has an additional benefit: I was running "sh update-microcodes.sh" previously which broke with update-microcodes.sh: 102: Bad substitution due to the script requiring /bin/bash instead of /bin/sh (uses bash-specific stuff). Running "bash update-microcodes.sh" works fine. Making the script executable in svn reduces the likelyhood of people running the script with differing shells that may not work. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5963 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17update intel microcode update scriptStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5961 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17Removes model_65x CPUIDs from model_6xx code.Keith Hui
They now have their own home at cpu/intel/model_65x. Signed-off-by: Keith Hui <buurin@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5960 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-16Move support for Deschutes Slot 1 CPUs (model_65x) into its own directory.Keith Hui
abuild-tested. I have no Deschutes CPUs to boot test this with. Signed-off-by: Keith Hui <buurin@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-15Drop unused DCACHE_RAM_BASE from intel/car/cache_as_ram.inc-using sockets.Uwe Hermann
This CAR implementation hardcodes the Cache-as-RAM base address to: 0xd0000 - CacheSize so the DCACHE_RAM_BASE is never actually used for this implementation and these sockets. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5953 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Move out Katmai Slot 1 CPUs (model_67x) from model_6xx to model_67x.Keith Hui
abuild-tested. Boot tested on P2B-LS. Signed-off-by: Keith Hui <buurin@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5950 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Convert all Intel i810 boards to CAR.Uwe Hermann
- Drop "select ROMCC" from the boards, as well as early_mtrr stuff. - Add "select CACHE_AS_RAM" to socket_PGA370/Kconfig, as well as the usual DCACHE_RAM_BASE and DCACHE_RAM_SIZE variables. - In socket_PGA370/Makefile.inc add: cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc - Other smaller related fixes. Abuild-tested and boot-tested on MSI MS-6178. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12Add missing include of model_6bx for slot_1.Keith Hui
I could no longer boot my P3B-F with my Tualeron and r5938. Dies with "unknown CPU". I believe it will happen with any Slot 1 440BX boards that supports model_6bx CPUs. I need to make the change below to make it work. abuild tested. Boot tested on P2B-LS and P3B-F. Signed-off-by: Keith Hui <buurin@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5945 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12Reduce duplicate definition in CAR code.Warren Turkal
Macros for the register addresses for the MTRR MSRs are already defined in include/cpu/x86/car.h. This patch uses those macros instead of creating a second instance of that same data. I also added a few macros to the amd mtrr.h to make the MSR naming more consistent. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5942 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Remove some duplicate #include files (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-06Convert all Intel 440BX boards to Cache-as-RAM (CAR).Uwe Hermann
- Add "select CACHE_AS_RAM" in src/cpu/intel/slot_1/Kconfig. - Add the following in src/cpu/intel/slot_1/Makefile.inc: cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc - Remove "select ROMCC" from all 440BX board Kconfig files. - Drop all early_mtrr_init() calls, that's done by CAR code now. Various small fixes were needed to make it build: - Drop do_smbus_recv_byte(), do_smbus_send_byte(), do_smbus_write_byte(), those were never called anyways. - Remove the "static" from the main() functions in romstage.c files. - Always call dump_spd_registers() from the 440BX debug.c, but use "#if CONFIG_DEBUG_RAM_SETUP" to only have that code if RAM debugging is enabled in menuconfig. - Drop all "lib/ramtest.c" #includes and ram_check() calls (even if commented out) from romstage.c's, as we've done for most other boards. - Add missing #includes or prototypes. Some of the prototypes will be removed later when we get rid of the #include'd .c files. Abuild-tested for all boards, and boot-tested on A-Trend ATC-6220. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5917 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-04Add missing Intel Pentium II/III era CPU IDs.Uwe Hermann
Add links to the respective Intel specification updates or manuals where the IDs are listed. Mention the possible core steppings of each CPU ID. There are duplicate IDs in model_6xx and model_68x for now, not sure if those should be eliminated, but there were already duplicates before this patch, so that's probably an extra issue to look into. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5909 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Add comments to make it clear why these two lines are written like that:Uwe Hermann
movl $REAL_XIP_ROM_BASE, %eax orl $MTRR_TYPE_WRBACK, %eax Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5908 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-01Factor out common CAR asm snippets.Uwe Hermann
This makes the CAR implementations a lot more readable, shorter and easier to follow, and also reduces the amount of uselessly duplicated code. For example there are more than 12 open-coded "enable cache" instances spread all over the place (and 12 "disable cache" ones), multiple "enable mtrr", "save BIST", "restore BIST", etc. etc. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5902 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-01Cosmetics, whitespace and coding-style fixes for Intel CAR (trivial).Uwe Hermann
This is abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5901 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-01Fix some breakage from 5890.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5899 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-01CAR simplifications, typos, readability improvements (trivial).Uwe Hermann
- Use some more #defines instead of hard-coding values. - Merge multiple movl/orl or movl/andl lines into one where possible. - Add some TODOs in places which seem to have either an incorrect code or incorrect comment. - Fix typos: s/for/from/, s/BSC/BSP/, s/size/carsize/. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5890 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Various cosmetic and coding style fixes in CAR code (trivial).Uwe Hermann
Also, whitespace fixes, consistency fixes, and drop some of the less useful comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5888 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Use existing, readable MTRR #defines instead of hardcoding numbers.Uwe Hermann
Replace $0x200 with $MTRRphysBase_MSR(0) etc. Also, move some #ifdef stuff a little bit around (should not affect any functionality) to make the Intel/AMD/VIA CAR implementations more similar and easier to compare. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5887 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-29Factor out fill_processor_name() and strcpy() functions.Uwe Hermann
The fill_processor_name() function was duplicated in multiple model_*_init.c files, move it into a new src/cpu/x86/name directory. The strcpy() function was also duplicated multiple times, move it to <string.h> where we already have similar functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5879 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-27This patch moves one of the CAR configs to the socket from the singleWarren Turkal
mainboard that uses it. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5868 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-27drop double include (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5858 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-26Normalize the config option for the Intel Atom CPU.Warren Turkal
All Intel CPU models appear to be identified with the form INTEL_CPU_MODEL_xxxxx. I haved changed the Atom to fit this normal form. A side effect is that the CPU doesn't need to be listed on the boards that support it since the socket identifies the CPUs it supports. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5853 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Drop <cpu/amd/mtrr.h> #include from Intel CPUs.Uwe Hermann
Three CAR implementations on Intel CPUs include <cpu/amd/mtrr.h>, which is obviously wrong, so drop the #includes. None of their #defines are used in the Intel code. Build-tested with two of the affected boards. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5840 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30mPGA479M Sockets can take Intel Mobile Celeron.Andreas Schultz
The 1.2GHz model has CPUID F29. This adds them to the list of CPUs for that socket. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> This patch likely breaks the following two boards since it unconditionally activates CAR code for this socket: * digitallogic/adl855pc * intel/mtarvon stepan suggests moving those two boards over to CAR, too, so we don't have to worry. --- src/cpu/intel/socket_mPGA479M/Kconfig | 1 + src/cpu/intel/socket_mPGA479M/Makefile.inc | 2 ++ 2 files changed, 3 insertions(+), 0 deletions(-) git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5750 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-14My forgotten CAR cleanup patch...Stefan Reinauer
- Drop lots of dead code from the various cache_as_ram.inc files. - Use some descriptive macros instead of magic numbers for MTRR MSRs - drop unused duplicate descriptors from romstage GDT - slightly reformatting code and comments Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5696 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
board porter: printk should always be available in CAR mode. Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board but it's not been used there. Very odd. There is one usage of CONFIG_USE_INIT which was always off in src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with those few lines. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-21This patch adds support for the Intel D810E2CB (i810e/ICH2) desktop board. ↵Joseph Smith
Hurray, this is the first i810 board running CAR. Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5637 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-21Create new socket for FCPGA370 and PGA370 CPU's for CAR. Add CAR support for ↵Joseph Smith
Coppermine FC-PGA CPU's (model_68x). Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5636 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-28Add Intel Atom microcodeStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5596 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-26Update Intel microcode include files from their web page.Stefan Reinauer
This still requires someone to adjust the #includes in the model_XXX_init.c files but with a script we're getting closer to automate the update of 3rd party files. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5593 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-26Use the microcode files as created by the new microcode update script. ↵Stefan Reinauer
(Fixes some whitespace and gets in new time stamps). No new microcode files included. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5592 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-26Drop problematically licensed Intel microcode filesStefan Reinauer
and replace them by their counterparts from Intel's opensource microcode file. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5591 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-26cosmetical changes on intel's microcode.cStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5590 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25also rename the config option.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25Long ago we agreed on kicking the _direct appendix because everything inStefan Reinauer
coreboot is direct. This patch does it. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5586 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-14license header fixes Nils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5545 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-26I meant SSE. Reported by Dustin Harrison.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5505 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-26Enable SSE2 for ep80579. Reported by Dustin Harrison.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5504 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 00:35:54 +0000