summaryrefslogtreecommitdiff
path: root/src/cpu/intel/model_1067x
AgeCommit message (Collapse)Author
2014-08-10cpu/intel/model_1067x: avoid null-pointer dereferencePatrick Georgi
Change-Id: I7467d4a947e9e447707e1370b7e639ddddc20d3d Found-by: Coverity Scan Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6570 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-12PCI: Drop includes under cpuKyösti Mälkki
The files affected do not make any PCI configuration calls. If they did, the more correct includes would be pci_ops.h, pci_defs.h and pci_ids.h. Change-Id: I3e7f009371be6ea50318eaabf0c15500cb3f1210 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5200 Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-01-16cpu/intel: Remove dummy terminators from microcode blobsAlexandru Gagniuc
Now that CBFS microcode no longer requires a NULL termination, remove the dummy terminators from all microcode blobs. This also enables microcode blobs from different CPU models to be linked in the same cpu_microcode_blob.bin without the terminators getting in the way. Change-Id: I25a6454780fd5d56ae7660b0733ac4f8c4d90096 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4506 Tested-by: build bot (Jenkins)
2014-01-16cpu/intel: Make all Intel CPUs load microcode from CBFSAlexandru Gagniuc
The sequence to inject microcode updates is virtually the same for all Intel CPUs. The same function is used to inject the update in both CBFS and hardcoded cases, and in both of these cases, the microcode resides in the ROM. This should be a safe change across the board. The function which loaded compiled-in microcode is also removed here in order to prevent it from being used in the future. The dummy terminators from microcode need to be removed if this change is to work when generating microcode from several microcode_blob.c files, as is the case for older socketed CPUs. Removal of dummy terminators is done in a subsequent patch. Change-Id: I2cc8220cc4cd4a87aa7fc750e6c60ccdfa9986e9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4495 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2013-06-14usbdebug: Drop temporary disables of log outputKyösti Mälkki
With this patch, output on usbdebug also includes the section of MTRR setups for every CPU. This makes usbdebug output almost identical with that of serial port and CBMEM console. Tested with model_206ax. Also tested previously on model_f2x which does not have these disable/enable calls in model_f2x_init() without detected issues. Change-Id: Idfd0e93439907b17255633658195d698feab3895 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3423 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-03-20Intel: Update CPU microcode for 1067x CPUsStefan Reinauer
Using the CPU microcode update script and Intel's Linux* Processor Microcode Data File from 2013-02-22 Change-Id: I4585288905cf7374e671894ab37f125220ae535e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2843 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-11Intel: Replace MSR 0xcd with MSR_FSB_FREQPatrick Georgi
And move the corresponding #define to speedstep.h Change-Id: I8c884b8ab9ba54e01cfed7647a59deafeac94f2d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2339 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-09speedstep: Deduplicate some MSR identifiersPatrick Georgi
In particular: MSR_PMG_CST_CONFIG_CONTROL MSR_PMG_IO_BASE_ADDR MSR_PMG_IO_CAPTURE_ADDR Change-Id: Ief2697312f0edf8c45f7d3550a7bedaff1b69dc6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2337 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-06cpu/intel/model_1067x: Add proper c-state/p-state/thermal supportNico Huber
Change-Id: I853454e8f5617fb7af5dddd7288bdeeacc7b1b8e Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-09Synchronize rdtsc instructionsStefan Reinauer
The CPU can arbitrarily reorder calls to rdtsc, significantly reducing the precision of timing using the CPUs time stamp counter. Unfortunately the method of synchronizing rdtsc is different on AMD and Intel CPUs. There is a generic method, using the cpuid instruction, but that uses up a lot of registers, and is very slow. Hence, use the correct lfence/mfence instructions (for CPUs that we know support it) Change-Id: I17ecb48d283f38f23148c13159aceda704c64ea5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1422 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-07-31Revert "Use broadcast SIPI to startup siblings"Sven Schnelle
This reverts commit 042c1461fb777e583e5de48edf9326e47ee5595f. It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I7dd1cba5a4c1e4b0af366b20e8263b1f6f4b9714 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1381 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-02Use broadcast SIPI to startup siblingsSven Schnelle
The current code for initializing AP cpus has several shortcomings: - it assumes APIC IDs are sequential - it uses only the BSP for determining the AP count, which is bad if there's more than one physical CPU, and CPUs are of different type Note that the new code call cpu->ops->init() in parallel, and therefore some CPU code needs to be changed to address that. One example are old Intel HT enabled CPUs which can't do microcode update in parallel. Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1139 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-02-10Intel cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Note: CPU_INTEL_CORE2 was used on both model_6fx and model_1067x. Change-Id: I8fa5ba71b14dcce79ab2a2c1c69b3bc36edbdea0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/618 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-10MTRR: get physical address size from CPUIDSven Schnelle
The current code uses static values for the physical address size supported by a CPU. This isn't always the right value: I.e. on model_6[ef]x Core (2) Duo CPUs physical address size is 36, while Xeons from the same family have 38 bits, which results in invalid MTRR setup. Fix this by getting the right number from CPUID. Change-Id: If019c3d9147c3b86357f0ef0d9fda94d49d811ca Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/529 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2010-12-11factor out cpu power management base into a separate file. And fix a bug inStefan Reinauer
model_1067x Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6164 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18update intel microcode files.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5964 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Remove some duplicate #include files (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-29Factor out fill_processor_name() and strcpy() functions.Uwe Hermann
The fill_processor_name() function was duplicated in multiple model_*_init.c files, move it into a new src/cpu/x86/name directory. The strcpy() function was also duplicated multiple times, move it to <string.h> where we already have similar functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5879 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25also rename the config option.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-25HAVE_MOVNTI really means SSE2. Also add sfence in the MOVNTI case.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-07newconfig is no more.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17Drop src/cpu/x86/fpu/{Config.lb,Makefile.inc} since they are also emptyPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4799 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Drop empty cpu/x86/{mmx,sse}/{Config.lb,Makefile.inc} and remove referencesPeter Stuge
Files in those directories are still used, but always with explicit path. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4792 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-09Remove default n statements to simplify .config and ldoptions files.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4753 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-06Various fixes to Kconfig: All kconfig-boards should have aPatrick Georgi
complete set of variables now, though they might still have the wrong values. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-25some progress on kconfig:Patrick Georgi
- northbridges are done - southbridges are done - Intel CPUs are done, with a design that the board only has to specify the socket it has, and the CPUs are pulled in automatically. There is some more cleanup possible in that area, but I'll do that later - a couple more mainboards compile: - intel/eagleheights - intel/jarrell - intel/mtarvon - intel/truxton - intel/xe7501devkit - sunw/ultra40 - supermicro/h8dme - tyan/s2850 - tyan/s2875 - via/epia - via/epia-cn - via/epia-m - via/epia-m700 - via/epia-n - via/pc2500e (PPC not considered, probably overlooked something) All of them only _build_, but some options are probably completely wrong. To be fixed later Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-01Add support for the Intel Eagle Heights development board.Thomas Jourdan
Signed-off-by: Thomas Jourdan <thomas.jourdan@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:20:48 +0000