summaryrefslogtreecommitdiff
path: root/src/cpu/amd
AgeCommit message (Collapse)Author
2013-01-25AGESA: Kconfig: Drop useless depends statementPatrick Georgi
`depends on FOO` in if FOO ... depends on FOO endif is useless. Introduced in commit 4b508341bcf11687be98d20f8178b5cc542a0842 Author: efdesign98 <efdesign98@gmail.com> Date: Wed Jul 13 17:16:13 2011 -0700 Add AMD Family 10 support to cpu folder and probably copied later on in the following commit. commit d3e990c6e5124f30b394f5dbd4902ea8bf341b07 Author: Kerry Sheh <shekairui@gmail.com> Date: Tue Feb 7 20:31:35 2012 +0800 AGESA F15: AGESA family15 model 00-0fh cpu wrapper Change-Id: I67cf231e3047a07cb6f0eeb5f77be368674a0603 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2186 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Hengelein <ilendir@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-11AMD: Set the mask of MTRR according to CONFIG_CPU_ADDR_BITSZheng Bao
The high bits of mtrr mask are MBZ (Must be zero). Writing 1 to these bits will cause exception. So be carefull when spread this change. The supermicro/h8scm needs more work. Currently it is set as it was. We need to check if the F10 and F15 have different value. Change-Id: I2dd8bf07ecee2fe4d1721cec6b21623556e68947 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1661 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-12Claim the SPI bus before writes if the IMC ROM is presentMartin Roth
The SB800 and Hudson now support adding the IMC ROM which runs from the same chip as coreboot. When the IMC is running, write or erase commands sent to the spi bus will fail, and the IMC will die. To fix this, we send a request to the IMC to stop fetching from the SPI rom while we write to it. This process (in one form or another) is required for writes to the SPI bus while the IMC is running. Because the IMC can take up to 500ms to respond every time we claim the bus, this patch tries to keep the number of times we need to do that to a minimum. We only need to claim the bus on writes, and using a counter for the semaphore allows us to call in once to claim the bus at the beginning of a number of transactions and it will stay claimed until we release it at the end of the transactions. Claim() - takes up to 500ms hit claim() - no delay erase() release() claim() - no delay write() release() Release() Change-Id: I4e003c5122a2ed47abce57ab8b92dee6aa4713ed Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1976 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-30AMD S3: Leverage the public SPI routineZheng Bao
Remove the old, unflexible code for storing S3 data in SPI flash. Refer to flashrom. Tested on Parmer. Change-Id: I60a10476befb4afab2b4241f01a988f4a8bb22cd Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1920 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-11-28amdk8/amdfam10: Use CAR_GLOBAL for sysinfoPatrick Georgi
This gets rid of the somewhat unstructured placement of AMD's sysinfo structure in CAR. We used to carve out some CAR space using a Kconfig variable, and then put sysinfo there manually (by "virtue" of pointer magic). Now it's a variable with the CAR_GLOBAL qualifier, and build system magic. For this, the following steps were done (but must happen together since the intermediates won't build): - Add new CAR_GLOBAL sysinfo_car - point all sysinfo pointers to sysinfo_car instead of GLOBAL_VAR - remove DCACHE_RAM_GLOBAL_VAR_SIZE - from CAR setup (no need to reserve the space) - commented out code (that was commented out for years) - only copy sizeof(sysinfo) into RAM after ram init, where before it copied the whole GLOBAL_VAR area. - from Kconfig Change-Id: I3cbcccd883ca6751326c8e32afde2eb0c91229ed Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1887 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-27Remove AMD special case for LAPIC based udelay()Patrick Georgi
- Optionally override FSB clock detection in generic LAPIC code with constant value. - Override on AMD Model fxx, 10xxx, agesa CPUs with 200MHz - compile LAPIC code for romstage, too - Remove #include ".../apic_timer.c" in AMD based mainboards - Remove custom udelay implementation from intel northbridges' romstages Future work: - remove the compile time special case (requires some cpuid based switching) - drop northbridge udelay implementations (i945, i5000) if not required anymore (eg. can SMM use the LAPIC timer?) Change-Id: I25bacaa2163f5e96ab7f3eaf1994ab6899eff054 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1618 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-20Unify use of bool config variablesStefan Reinauer
e.g. -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS This will make it easier to switch over to use the config_enabled() macro later on. Change-Id: I0bcf223669318a7b1105534087c7675a74c1dd8a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1874 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-20Make sure only one udelay function is availableStefan Reinauer
The Agesa wrapper and UDELAY_TIMER2 define their own timer functions, so don't shove in UDELAY_IO Change-Id: Ibe3345e825e0c074d5f531dba1198cd6e7b0a42d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1864 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Clean up KconfigStefan Reinauer
- move VGA handling options into devices/Kconfig - make Devices a top level menu - move some options "closer" to the code they control Change-Id: Ia79541d18b2b0d9b89a8b154255e312060627c48 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1840 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-02AMD agesa: add enable cache at the end of disable_cache_as_ramSiyuan Wang
add this code according to src/include/cpu/x86/cache.h ,line 92, functin enable_cache() Change-Id: Ida96a98397eeed98dd61ca979e8c5a33bf00f9e5 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1662 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-07Remove chip.h files without config structureKyösti Mälkki
Also deletes files not included in build: src/southbridge/amd/cimx/sb700/chip_name.c src/southbridge/amd/cimx/sb800/chip_name.c src/southbridge/amd/cimx/sb900/chip_name.c Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1473 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-19C32 legacy code: change CONFIG_CPU_AMD_SOCKET_C32 to ↵Siyuan Wang
CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA Currently the C32 has some legacy boards which use the old C32 code. We need to seperate them. CONFIG_CPU_AMD_SOCKET_C32 was used in legacy code before. But it is not a good idea, so we change the code as follows: So we use CONFIG_CPU_AMD_SOCKET_C32 to identify mainboard which uses agesa code, and use CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA to identify mainboard which uses legacy code. Change-Id: If6114bf8912e78b7732f25a1adfb2e4d8eb10ee4 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1497 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-09Replicate TOP_MEM and TOP_MEM2 from BSP to AP CPUKyösti Mälkki
The search loop for UMA resource was only used to check for the highest RAM address below 4GB. The cached values from BSP CPU can now be used for the replication. Change-Id: I5244ffa6f8a93f5ff5aaf8a71bd006b0f9cd518a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1388 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-09AMD northbridge: copy TOP_MEM and TOP_MEM2 for distributionKyösti Mälkki
Take a copy of BSP CPU's TOP_MEM and TOP_MEM2 MSRs to be distributed to AP CPUs and factor out the debugging info from setup_uma_memory(). Change-Id: I1acb4eaa3fe118aee223df1ebff997289f5d3a56 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1387 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-09Synchronize rdtsc instructionsStefan Reinauer
The CPU can arbitrarily reorder calls to rdtsc, significantly reducing the precision of timing using the CPUs time stamp counter. Unfortunately the method of synchronizing rdtsc is different on AMD and Intel CPUs. There is a generic method, using the cpuid instruction, but that uses up a lot of registers, and is very slow. Hence, use the correct lfence/mfence instructions (for CPUs that we know support it) Change-Id: I17ecb48d283f38f23148c13159aceda704c64ea5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1422 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-05AMD S3: Remove the hardcoded volatile positionzbao
Change-Id: I4bcf3f3435f0ba487955d14ed1b010fd94b9f625 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1408 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-04Make the device tree available in the rom stageStefan Reinauer
We thought about two ways to do this change. The way we decided to try was to 1. drop all ops from devices in romstage 2. constify all devices in romstage (make them read-only) so we can compile static.c into romstage 3. the device tree "devices" can be used to read configuration from the device tree (and nothing else, really) 4. the device tree devices are accessed through struct device * in romstage only. device_t stays the typedef to int in romstage 5. Use the same static.c file in ramstage and romstage We declare structs as follows: ROMSTAGE_CONST struct bus dev_root_links[]; ROMSTAGE_CONST is const in romstage and empty in ramstage; This forces all of the device tree into the text area. So a struct looks like this: static ROMSTAGE_CONST struct device _dev21 = { #ifndef __PRE_RAM__ .ops = 0, #endif .bus = &_dev7_links[0], .path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}}, .enabled = 0, .on_mainboard = 1, .subsystem_vendor = 0x1ae0, .subsystem_device = 0xc000, .link_list = NULL, .sibling = &_dev22, #ifndef __PRE_RAM__ .chip_ops = &southbridge_intel_bd82x6x_ops, #endif .chip_info = &southbridge_intel_bd82x6x_info_10, .next=&_dev22 }; Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1398 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-22AMD CPUs: Updated CPU list in powernow_acpi.cJukka Rantala
Updated P state table to make frequency scaling work. Added these CPUs: http://support.amd.com/us/Processor_TechDocs/30430.pdf Also wrote a Python script for parsing AMD docs, but not sure where to put it: http://pastebin.com/1dSvkXwc Change-Id: I8f08111b73b9be551f3f59d2acb15051ccf36c1e Signed-off-by: Jukka Rantala <jukka.rantala@gmail.com> Reviewed-on: http://review.coreboot.org/1244 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-18AMD northbridges: drop dead codeKyösti Mälkki
Change-Id: I03949722ac3a127319a0ad3f812d77ba7b8f139f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1187 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16AMD: Fix GFXUMA with 4GB or more RAMKyösti Mälkki
Northbridge code incorrectly adjusted the last cacheable memory resource to accomodate room for UMA framebuffer. If system had 4GB or more memory that last resource is not below 4GB and not the one where UMA is located. There are three consequences: The last entry in coreboot memory table is reduced by uma_memory_size. Due the incorrect code in northbridge code state.tomk, end of last resource below 4GB, had not been adjusted. Incrementing that by uma_memory_size diverts a region possibly claimed for MMIO to RAM, as TOP_MEM is written. Since the UMA framebuffer did not have IORESOURCE_CACHEABLE, it was ignored from the MTRR setup and not set uncacheable. The setting of TOP_MEM and TOP_MEM2, as well as all the MTRRs, should be copied from BSP to all APs instead of deriving the data separately for each Logical CPU. Change-Id: I8e69fc8854b776fe9e4fe6ddfb101eba14888939 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1217 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16AMD MTRR: fix rounding and renamesKyösti Mälkki
Use state.tomk to refer TOP_MEM, largest RAM address below 4GB. Use state.tom2k to refer TOP_MEM2, largest RAM address above 4GB. When setting either TOP_MEM or TOP_MEM2, any RAM resource found must fit below the set value. Thus, round register value upwards, not downwards. Change-Id: I436c1b3234c911680ce8b095052f8d71f40113e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1216 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-14Remove useless file from building.zbao
Change-Id: I09c695347c04d7db9add2cbb687d59c829175cfc Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1224 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-03AGESA F15 wrapper for Trinityzbao
The wrapper for Trinity. Support S3. Parme is a example board. Change-Id: Ib4f653b7562694177683e1e1ffdb27ea176aeaab Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1156 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Some more #if cleanupPatrick Georgi
Replace #elif (CONFIG_FOO==1) with #elif CONFIG_FOO find src -type f -exec sed -i "s,\(#.*\)(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]1),\1\2,g" {} + (manual tweak since it hit a false positive) Replace #elif (CONFIG_FOO==0) with #elif !CONFIG_FOO find src -type f -exec sed -i "s,\(#.*\)(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]0),\1\!\2,g" {} + Change-Id: I8f4ebf609740dfc53e79d5f1e60f9446364bb07d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1006 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-05-01Move VSA support from x86 to GeodePatrick Georgi
Instead of the special case in the generic Makefile.inc, use cbfs-files in the CPU directories. Change-Id: I71d9c8dff906c9a516ac0dd09a315f8956075592 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/962 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-05-01Make geode_lx use the vsa from blobs repositoryPatrick Georgi
... or fail if repository is not enabled. Change-Id: I0a1e6d6fed852ec7edf96ace8346ae6b23838a56 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/959 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-04-30Rework ACPI CST table generationStefan Reinauer
... in order to unify the Sandybridge and Lenovo implementations currently used in the tree. - use acpi_addr_t in acpigen_write_register() - use acpi_cstate_t for cstate tables (and fix up the x60 and t60) - drop cst_entry from acpigen.h Change-Id: Icb87418d44d355f607c4a67300107b40f40b3b3f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/943 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-25Replace cache control magic numbers with symbolsPatrick Georgi
Instead of opaque numbers like (1<<29), use symbols like CR0_NoWriteThrough. Change-Id: Id845e087fb472cfaf5f71beaf37fbf0d407880b5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-22amd: Fix unused variable warningVikram Narayanan
Comment out the id variable which is used in a commented code block. Change-Id: Ib002d57e5314971f0589d04b7e451ab7d7079f53 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/913 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-16S3 code in coreboot public folder.zbao
1. Move the Stack to high memory. 2. Restore the MTRR before Coreboot jump to the wakeup vector. Change-Id: I9872e02fcd7eed98e7f630aa29ece810ac32d55a Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/623 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-12S3 code in vendorcode folder.zbao
Change the ExecuteFinalHltInstruction to assembly code. so we can make sure the code can run stackless. Change-Id: I783ced6cf7c5bc29c12a37aef29077e610d8957d Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-02S3 code whitespaces changes.zbao
some blank changing is integrated into the previous patches, which hold the unsplitted diff hunk. Change-Id: If9e5066927c5e27fee7ac8422dbfbf2cbeac7df5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/625 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-16Rename AMD_AGESA to CPU_AMD_AGESAKyösti Mälkki
Also any CPU_AMD_AGESA_FAMILYxx selects CPU_AMD_AGESA, so remove the explicit selects from the mainboards. Change-Id: I4d71726bccd446b0f4db4e26448b5c91e406a641 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/792 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Fix AMD Agesa leaking KconfigKyösti Mälkki
Kconfig leaked XIP_ROM_SIZE to other platforms and also defined obsolete option XIP_ROM_BASE. Alias AMD_AGESA as NORTHBRIDGE_AMD_AGESA. Break the circular dependency with family15 Kconfig. Change-Id: Ic7891012220e1bef758a5a39002b66971d5206e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/773 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-20Fix MTRR TOM2 WB cache setup for AMD CPUs > revF.Marc Jones
The MTRR check for WB TOM2 setting was only checking revF, not extended family revisions. All families above revf indicate 0xf in the family field and have additional bits in the extended family field. Change-Id: I93d719789acda6b7c42de7fd6d4bad2da866a25f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/627 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Remove whitespace.Patrick Georgi
Fix issues reported by new lint test. Change-Id: I077a829cb4a855cbb3b71b6eb5c66b2068be6def Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-16AGESA F15: AGESA family15 model 00-0fh cpu wrapperKerry Sheh
Change-Id: I7580bc063c09d99d3fca8b20cd39df2384a6ad44 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/555 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Rename directories and Kconfig as follows: model_lx -> geode_lx model_gx1 -> geode_gx1 model_gx2 -> geode_gx2 Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-09Fix Geode GX2 + LX caching for tiny bootblock.Nils Jacobs
Change-Id: If681a33deb7df752b37c6a8a20482d3c374af936 Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/528 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
2011-12-26Fix Fam10 MMCONF_SUPPORT_DEFAULT setting.Marc Jones
I misunderstood how kconfig select works. It needs to be selected with a config option. Moved the select to the correct location. Change-Id: If9b1e21e6cbc5af4671efb76cf87dd18dbbe2234 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/487 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-13Use MMCONF for all AMD family 10 CPUs.Marc Jones
This fixes problems in AP init when multiple APs are trying to access PCI config space. All Fam10 CPUs setup and support MMCONF. Change-Id: I00a25bbf4e4152c89024f14a3c4c1c36b48d0128 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/455 Tested-by: build bot (Jenkins) Reviewed-by: Alec Ari <neotheuser@ymail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-22k8 raminit: add workaround for erratum #181 on non-fam-fFlorian Zumbiehl
Disable DRAM controller on non-fam-f CPUs not using fam-f register layout. Change-Id: I2cc87857452555011d69bfebe9f9c4c17cef8f6c Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/448 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01Remove XIP_ROM_BASEPatrick Georgi
The base is now calculated automatically, and all mentions of that config option were typical anyway (4GB - XIP_ROM_SIZE). Change-Id: Icdf908dc043719f3810f7b5b85ad9938f362ea40 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/366 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30Fix slow CAR execution introduced by 7c7d87182feb78cb2bc02fb3558bef56a41682c9Rudolf Marek
It is meant to be a address and not a dereference. Otherwise MTRR is filled with code and not with the address. This is what I hate at most on the AT&T syntax. Instead of taking the address, it was a dereference. Not greatly visible, except I wondered why opcode is not 0xb4 but 0xa1 and it took another half an our to see it. Change-Id: I6b339656024de8f6e6b3cde63b16b7ff5562d055 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/358 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2011-10-28Get rid of AUTO_XIP_ROM_BASEPatrick Georgi
That value is now generated from a code address and CONFIG_XIP_ROM_SIZE. This works as MTRRs are fully specified by their size and any address within the range. Change-Id: Id35d34eaf3be37f59cd2a968e3327d333ba71a34 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/348 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-17Fixes several issues with amd k8 SSDT P-state generationOskar Enoksson
First issue fixed: For multi-socket CPU the current implementation emitted Processor objects for cores in the first CPU only. This commit fixes the bug by really emitting one Processor object for each core. However, the unlikely case of mixed CPU models is still not handled correctly. Second issue fixed: One loop was wrong in case a processor in the table declares no P-states at all. The rewritten loop is safe. Some possibly dangerous array lengths were also fixed. Third issue: on MP-boards the recommended ramp-voltage (RVO) is 0mV according to the BKDG. The current implementation always set it to 25mV. This commit selects 0 or 25mV depending on CONFIG_MAX_PHYSICAL_CPUS. Fourth issue: If a processor without PowerNow! support was inserted in a system with coreboot configured with SET_FIDVID then the boot process hanged mysteriously and very early. Apparently because init_fidvid_ap tampers with non-existing registers. This commit fixes the bug by bailing out from init_fidvid_ap if PowerNow! capability is missing. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: I61f6e2210b84ccba33a36c5efc866447b7134417 Reviewed-on: http://review.coreboot.org/239 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11Fixed broken MTRR for >4GB memory on AMD K8 fam 0fh rev <=EOskar Enoksson
AMD K8 rev F and later implements a bit SYSCFG_MSR_TOM2WB to mark dram memory above 4GB as WB. However, AMD K8 rev E and earlier don't implement this bit and therefore need MTRR spanning dram memory above 4GB. The current implementation of amd_setup_mtrrs never generate MTRR above 4GB. This caused memory > 4GB not to be recognized in e.g. Linux on those rev E or older platforms. This commit should fix that bug. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: Ie568a52a8eb355969c86964d5afc4692e60f69c1 Reviewed-on: http://review.coreboot.org/238 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-24Add AMD Family 10h PH-E0 supportQingPei Wang
the patch file comes from src/vendorcode/amd/agesa/f12/Proc/CPU/Family/0x10/RevE /F10MicrocodePatch010000bf.c Change-Id: If701c8a908edf1c486665d3ce4df65da0f65c802 Signed-off-by: QingPei Wang <wangqingpei@gmail.com> Reviewed-on: http://review.coreboot.org/202 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-07AMD F14 Rev C0 updateKerry She
Add AMD Family14 Rev C0 cpu id Change-Id: Iacd1c7b20e889da61a2085188766285f27e5c018 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/160 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-06Update AMD F14 Agesa to support Rev C0 cpusefdesign98
This change updates the AMD Agesa code to support the Family 14 rev C0 cpus. It also fixes (again) a ton of warnings, although not all of them are gone. The warning fixes affect code in the Family 12 tree as well, so there are some small changes therein. This code has been tested on a Persimmon and passes Abuild. This is the first (and largest) of a number of commits to complete the upgrade. Change-Id: Id28d9bf7931f8baa2a602f6bb096a5a465ccd20d Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/131 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-18Add AMD Family 10 support to cpu folderefdesign98
This change adds the AMD Family 10 cpu support to the cpu folder. It also updates the makefiles of the Families 12 and 14 to take advantage of a pair of shared files that are moved to the cpu/agesa folder. Change-Id: Ibd3a50ea7a3028bd6a2d2583f021506b73e2fce2 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/97 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-13Make AMD SMM SMP awareRudolf Marek
Move the SMM MSR init to a code run per CPU. Introduce global SMM_BASE define, later all 0xa0000 could be changed to use it. Remove the unnecessary test if the smm_init routine is called once (it is called by BSP only) and also remove if lock bit is set becuase this bit is cleared by INIT it seems. Add the defines for fam10h and famfh to respective files, we do not have any shared AMD MSR header file. Tested on M2V-MX SE with dualcore CPU. Change-Id: I1b2bf157d1cc79c566c9089689a9bfd9310f5683 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/82 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
This change adds the wrapper code for the AMD Family12 cpus and the AMD Hudson-2 (SB900) southbridge to the cpu, northbridge and southbridge folders respectively. Change-Id: I22b6efe0017d0af03eaa36a1db1615e5f38da06c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/53 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-22Move existing AMD Ffamily14 code to f14 folderefdesign98
This change moves the AMD Family14 cpu Agesa code to the vendorcode/amd/agesa/f14 folder to complete the transition to the family oriented folder structure. Change-Id: I211e80ee04574cc713f38b4cc1b767dbb2bfaa59 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/52 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-05-15Cosmetic cleanup.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6594 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Correct the number of MCA error reporting banks cleared.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6571 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-151) Initialize BSP fixed MTRRs to match AP fixed MTRR initialization.Scott Duplichan
2) Remove coreboot variable MTRR initialization because AMD reference code handles it. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6570 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-10Change read_option() to a macro that wraps some API uglynessPatrick Georgi
Simplify read_option(CMOS_VSTART_foo, CMOS_VLEN_foo, somedefault) to read_option(foo, somedefault) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6565 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixes.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6537 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14Use symbolic names for some MTRR bits instead of numbers in CAR codeStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6493 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28Add AMD C32 support.Zheng Bao
It is based on other existing Fam10 code. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6464 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-17Fix breaking the build after removing files in tthe previous checkin. Marc Jones
Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6453 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-04Add P-states for select Socket 754 processors.Jonathan Kollasch
States for AMA3000BEX5AR, SDA3100AIO3BX, and SDA3400AIO3BX are from AMD document 30430 3.51. States for ADA3200AIO4BX derived from SSDT of a MS-7135. States for TMDML34BKX5LD derived from legacy PowerNow! table of a MS-7135, and therefore lack accurate TDP information. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6432 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-03Correct off-by-one problem in AMD pre-rev-F model-F PowerNow code.Jonathan Kollasch
With this change the last P-state entry of the last CPU in the table is successfully conveyed into the SSDT. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6430 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6411 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6410 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6409 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. In fact I changed coreDelay before deleting the code in fidvid that called it. But there're still a couple of calls from src/northbridge/amd/amdmct/wrappers/mcti_d.c Since the comment encouraged fixing something, I parametrized it with the delay time in microseconds and paranoically tried to avoid an overflow at pathological moments. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6408 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Well, I understand it better like this, but maybe it's only me, part of the changes are paranoic, and the only effective change is for a factor depending on mobile or not that I can't test. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6406 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add an untested step in BKDG 2.4.2.8. I don't have the hardware with Core Performance Boost and I think it's only available in revision E that does not even have a constant yet. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6405 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add to init_fidvid_stage2 some step mentioned in BKDG 2.4.2.7 that was missing . Some lines are dead code now, but may handy if one day we support revison E CPUs. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6404 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add to init_fidvid_stage2 some step for my CPU (rev C3) mentioned in BKDG 2.4.2.6 (5) that was missing Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6403 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Looking at BKDG the process for updating Pstate Nb vid after warn reset seemed more similar to the codethat was there fo pvi than the one for svi, so I called the pvi function passing a pvi/svi flag. I don't find documentation on why should UpdateSinglePlaneNbVid() be called in PVI, but since I can't test it, I leave it as it was. This patch showed some progress beyond fidvid in my boar,d but only sometimes, most times it just didn't work. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6402 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Factor out some common expressions. Add an error message when coreboots hangs waiting for a pstate that never comes (it happened to me), and throw some paranoia at it for good mesure. If I understood BKDG fam10 CPUs never need a software initiated vid transition, because the hardware knows what to do when you just request a Pstate change if the cpu is properly configured. In fact unifying a little what PVI and SVI do was better for my board (SVI). So I drop transitionVid, which I didn't understand either (why did it have a case for PVI if it is never called for PVI ? Why did the PVI case distinguigh cpu or nb when PVI is theoretically single voltage plane ? ). Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Contemplate the possibility of nbCofVidUpdate not being defined, trying to get closer to BKDG Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Configuration of F3x[84:80] was hardcoded for rev B. I change that for some code that checks for revision and configures according to BKDG. Unfinished but hopefully better than it was. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6398 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. BKDG says nbSynPtrAdj may also be 6 sometimes. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6397 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I didn't understand quite why it did that iwth F3xA0 (Power Control Misc Register) so I moved Pll Lock time to rules in defaults.h and reimplemented F3xA0 programming. A later patch will remove a part I don't know what's mean to do. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6396 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Bring F3xD4 (Clock/Power Control Register 0) more in line with BKDG i more cases. It requires looking at the CPU package type so I add a function for that (in the wrong place?) and some new constants Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6395 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . Factor out the decision whether to update northbridge frequency and voltage because there was the same code in 3 places and so we can later modify it in one place. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . Factor out the decision whether to update northbridge frequency and voltage because there was the same code in 3 places and so we can later modify it in one place. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid. Factor out a little common code. Also, our earlier config_clk_power_ctrl_reg0 was still too long and it'd get longer with forthcoming patches. We now take apart F3xD4[PowerStepUp,PowerStepDown] to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3x[84:80], ACPI Power State Control Registers, to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6391 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3xDC[NbsynPtrAdj], Northbridge/core synchronization FIFO pointer adjust, to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3xA0, Power Control Misc Register to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart F3xD4, Clock Power/Timing Control 0 to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6388 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Prepare for next patches (Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . prep_fid_change was already long and it'd get longer with forthcoming patches. We now take apart VSRamp in step b of 2.4.1.7 BKDG to its own function. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6387 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Make AMD Fam10h CPU microcode updates optional in Expert modeXavi Drudis Ferran
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26It adds support for automatic PSS object generation for AMD pre fam Fh CPU. ↵Rudolf Marek
Those CPUs require a hardcoded table, which I managed to rewrite during one particularly boring flight. Too pity it is only for Opteron CPUs. Someone needs to finish the second PDF for All others Athlons and Semprons. Also it enables the FID/VID changes in SB. Jakllsch had some troubles with that too but on am2 CPU. Those bits are only documented in SB600. They arent in RRG RPR and BDG. Signed-off-by: Rudolf Marek <r.marek@asssembler.cz> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 12:36:53 +0000