Age | Commit message (Collapse) | Author |
|
Serves two purposes:
(1) On some platforms, FSP initialization may cause a reboot.
Push clearing the recovery mode switch until after FSP code runs,
so that a manual recovery request (three-finger salute) will
function correctly under this condition.
(2) The recovery mode switch value is needed at BS_WRITE_TABLES
for adding an event to elog. (Previously this was done by
stashing the value in CBMEM_ID_EC_HOSTEVENT.)
BUG=b:124141368, b:35576380
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I30c02787c620b937e5a50a5ed94ac906e3112dad
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Iac3ae21a381119bd0f24f68d4dd991817f2ff51f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
This patch creates a new commonlib/bsd subdirectory with a similar
purpose to the existing commonlib, with the difference that all files
under this subdirectory shall be licensed under the BSD-3-Clause license
(or compatible permissive license). The goal is to allow more code to be
shared with libpayload in the future.
Initially, I'm going to move a few files there that have already been
BSD-licensed in the existing commonlib. I am also exracting most
contents of the often-needed <commonlib/helpers.h> as long as they have
either been written by me (and are hereby relicensed) or have an
existing equivalent in BSD-licensed libpayload code. I am also
relicensing <commonlib/compression.h> (written by me) and
<commonlib/compiler.h> (same stuff exists in libpayload).
Finally, I am extracting the cb_err error code definitions from
<types.h> into a new BSD-licensed header so that future commonlib/bsd
code can build upon a common set of error values. I am making the
assumption here that the enum constants and the half-sentence fragments
of documentation next to them by themselves do not meet the threshold of
copyrightability.
Change-Id: I316cea70930f131e8e93d4218542ddb5ae4b63a2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I9650084f42de15c04c7e26d8a4442a4f9ff65a87
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ie210191b79e94d3918ea95d40aeba40f33eb1b2f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I9426b88c0936c68d02554b580cc312902b8e5e13
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37810
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Emmc spec, JEDEC Standard No. 84-B51, section 6.6.2.3, selection
flow of HS400 using Enhanced Strobe states that host should change
frequency to ≤ 52MHz when switching to HS speed mode first. In
current code, mmc_select_hs400() calls mmc_select_hs() to do this,
however caps are not cleared, so when switching from HS200 to HS400,
caps will still have DRVR_CAP_HS200, and mmc_recalculate_clock() will
set 200Mhz instead of ≤ 52MHz. As a result, switching to HS400 will
intermittently fail.
BUG=b:140124451
TEST=Switch speed from HS200 to HS400 on WHL RVP.
Change-Id: Ie639c7616105cca638417d7bc1db95b561afb7af
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37775
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I730f80afd8aad250f26534435aec24bea75a849c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
According to the POSIX standard, %p is supposed to print a pointer "as
if by %#x", meaning the "0x" prefix should automatically be prepended.
All other implementations out there (glibc, Linux, even libpayload) do
this, so we should make coreboot match. This patch changes vtxprintf()
accordingly and removes any explicit instances of "0x%p" from existing
format strings.
How to handle zero padding is less clear: the official POSIX definition
above technically says there should be no automatic zero padding, but in
practice most other implementations seem to do it and I assume most
programmers would prefer it. The way chosen here is to always zero-pad
to 32 bits, even on a 64-bit system. The rationale for this is that even
on 64-bit systems, coreboot always avoids using any memory above 4GB for
itself, so in practice all pointers should fit in that range and padding
everything to 64 bits would just hurt readability. Padding it this way
also helps pointers that do exceed 4GB (e.g. prints from MMU config on
some arm64 systems) stand out better from the others.
Change-Id: I0171b52f7288abb40e3fc3c8b874aee14b9bdcd6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
|
|
Change-Id: I17dc2fed6c6518daf5af286788c98c049088911e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: Idfbc0cf24000c361c9272fe0f61797de999c9277
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37052
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 4 new timestamps to the EC software sync flow:
1) Beginning of EC software sync
2) EC finished calculating Vboot hash
3) EC is no longer requesting power limiting
4) End of EC software sync
BUG=none
BRANCH=none
TEST=verified timestamps show up in cbmem log
Change-Id: I6e5703c146b5ec27d01700fdb39cb3d2092ea8a8
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Support to display a logo using FSP 1.1 currently resides in facebook fbg1701
mainboard.
The related support is moved to drivers/intel/fsp1_1 and used by the
Facebook fbg1701 mainboard. The storage for the uncompressed logo
is changed. We don't use .bss any longer as the logo doesn't need to be
available at runtime.
BUG=N/A
TEST=booting Facebook fbg1701
Change-Id: I276e6e14fc87d0b95fe5fdf7b617afd26769de79
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Provide region_device_end() and make region_end() publically available
for use to match a pattern of open coding the offset + size calculation
for both struct region and struct region_device. Apply the use of the
helpers where the usage matches in the code.
Change-Id: Iaef5d007eef9a77f7f33b0e89298abef0197352d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36689
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of open coding an offset of 0 and querying the size of a
region device provide a rdev_chain_full() helper function that
does that for the caller. For the existing users that match this pattern
convert them to using rdev_chain_full().
Change-Id: Ie316790a8a5b16a7f7e22f86f58bd2e633c19450
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36683
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use __builtin_offsetof (which is treated as a constant expression) with
Clang & GCC. This also allows check_member to work with Clang 9.
Signed-off-by: Alex James <theracermaster@gmail.com>
Change-Id: I8b5cb4110c13ee42114ecf65932d7f1e5636210e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36249
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If there is no alloca() macro defined, then define it as
__builtin_alloca(), as most compilers support that as an intrinsic
instead, if no alloca.h is included.
Change-Id: I8730d57ce7c2f323b52e7a5720c598fb7af16b44
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36387
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Prepare for products that can use any DRAM for TSEG.
Include an ID for data pointed to by an ACPI BERT table. This region's
only requirement is it is marked reserved.
Change-Id: Ia6518e881b0add71c622e65572474e0041f83d61
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36115
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Mark files in CBFS as IBB (Initial BootBlock)
* Will be used to identify the IBB by any TEE
Change-Id: Idb4857c894b9ee1edc464c0a1216cdda29937bbd
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The simple PCI config accessors are always available
under names pci_s_[read|write]_configX.
Change-Id: Ic1b67695b7f72e4f1fa29e2d56698276b15024e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For platform independend exposure of FMAP through a kernel module
cache the FMAP in CBMEM. In addition add a pointer in coreboot tables
pointing to the introduced CBMEM area.
To not waste the allocated DRAM, use the cached CBMEM in RAM enabled
stages if possible.
Tested on qemu using
https://github.com/9elements/linux/commits/google_firmware_fmap2
Tested on QEMU and Supermicro X11SSH-TF.
Change-Id: I4e01c573c3edfa34dbba5fe7604d4f6e18b584d5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I4c9351652d81040cc4e7b85bdd1ba85709a74192
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
region_is_subregion() checks whether the size of the inner region is
larger than the size of the outer region... which isn't really necessary
because we're already checking the starts and ends of both regions.
Maybe this was added to ensure the inner region doesn't overflow? But
it's not guaranteed to catch that in all cases. Replace it with a proper
overflow check.
Change-Id: I9e442053584a479a323c1fa1c0591934ff83eb10
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Sometimes the display native orientation does not match the device
default orientation. We add a parameter to be passed to libpayload,
which can then do the rotation.
BUG=b:132049716
TEST=Boot krane, see that FW screen is orientation properly.
Change-Id: I5e1d94b973a3f615b73eebe0ca1202ba03731844
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
vboot_handoff is no longer used in coreboot, and is not
needed in CBMEM or cbtable.
BUG=b:124141368, b:124192753
TEST=make clean && make runtests
BRANCH=none
Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I76ec5ff107bc043d9457b3377e88226a96eb3f3c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
We had a value that was overloaded thrice.
By moving them in a common structure and ordering them by value such
issues are hopefully avoided in the future.
Also add a few values to libpayload that were only defined in
commonlib.
Change-Id: I227d078eebee2d92488454707d4dab8ecc24a4d8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32958
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The USB Type-C Connector System Software Interface (UCSI) defines a
required memory oregion for the OS UCSI driver to use to communicate
with the BIOS and EC.
This provides a CBMEM ID that can be used by drivers to allocate this
shared memory region for the UCSI driver to use.
BUG=b:131083691
Change-Id: Id5b7fa19436443bc11a6ebe3ce89cd552cee4d85
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Also adapt all users of these symbols
Change-Id: Ibf924a283d438de49a93ce661b0d9ca1a81cd6d1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
It conflicts with VBOOT_WORKBUF but unlike VBOOT_WORKBUF no user can be
identified in the coreboot tree for TCPA_LOG, so renumber this.
Change-Id: Ib8a850c0ccbcacdf7d288316b54eb82fce874a82
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
We got another tag in the meantime, so resolve the conflict.
Change-Id: I64cb5e02a9bed3d8746b75e451c13a1598341ba1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32954
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pass the return value from early_mmc_wake_hw() to the payload so that
payload can skip sending CMD0 and resetting the card in case of success
or in case of a failure in firmware, payload can recover by sending
CMD0 and resetting the card.
BUG=b:78106689
TEST=Boot to OS
Change-Id: Ia4c57d05433c3966118c3642913d7017958cce55
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25464
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve boot time with emmc, add ability to send CMD0
and CMD1 early in romstage. This way, by the time system boots to
payload, we are ready to continue with emmc setup and we don't need
to send CMD0 in payload again, and wait for card to reset and be ready.
BUG=b:78106689
TESTS = Boot to OS
Force early_mmc_wake_hw() to return error, recover in payload
Force an error in payload, make sure system can recover/boot
Change-Id: I3488b077bf5100a1e0f2c879fb1436105607d25e
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
coreboot should not have a definition of printf() anywhere -- it's too
easy to accidentally sneak it into code otherwise. Where that is needed
in code shared with userspace utilities, we should instead use printk()
and define a shim for that for the userspace side.
Change-Id: Iaa459df7122c88beb56695eee7c252d90bbde861
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32857
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Should include vb2_sha.h header when SHA library functions or
constants are required. This replaces NEED_VB2_SHA_LIBRARY.
BUG=b:124141368, chromium:956474
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I9f32174dbf3de05fbe5279cb8017888757abf368
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1583820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Ib843eb7144b7dc2932931b9e8f3f1d816bcc1e1a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Guckian
|
|
Change-Id: Ie21c390ab04adb5b05d5f9760d227d2a175ccb56
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Check for CONFIG not IS_ENABLED, as we use the former now.
Change-Id: I7e1b67bc0894ca6f0149039054449656b58bcdd3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Also, extra-lines added or removed and local includes moved down.
Change-Id: I5e739233f3742fd68d537f671642bb04886e3009
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32009
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I just got hit by a double-evaluation bug again, it's time to attempt
to fix this once more. Unfortunately there are several issues that don't
make this easy:
- bitfield variables don't support typeof()
- local macro variables that shadow others trigger -Werror=shadow
- sign warnings with integer literal and unsigned var in typeof-MIN()
- ({ statement expressions }) can not be used outside functions
- romcc doesn't support any of the fancy GCC/clang extensions
This patch tries to address all of them as far as possible with macro
magic. We don't have the technology to solve the bitfield and
non-function context issues yet (__builtin_choose_expr() still throws a
"no statement expression outside a function" error if it's only in the
branch that's not chosen, unfortunately), so we'll have to provide
alternative macros for use in those cases (and we'll avoid making
__ALIGN_MASK() double-evaluation safe for now, since it would be
annoying to do that there and having an alignment mask with side
effects seems very unlikely). romcc can continue using unsafe versions
since we're hopefully not writing a lot of new code for it. Sign
warnings can be avoided in literal/variable comparisons by always using
the type of the variable there. Shadowing is avoided by picking very
explicit local variable names and using a special __COUNTER__ solution
for MIN() and MAX() (the only ones of these you're likely to nest).
Also add DIV_ROUND_UP() to libpayload since it's a generally quite
useful thing to have.
Change-Id: Iea35156c9aa9f6f2c7b8f00991418b746f44315d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch cleans up remaining uses of raw boolean Kconfig values I
could find by wrapping them with CONFIG(). The remaining naked config
value warnings in the code should all be false positives now (although
the process was semi-manual and involved some eyeballing so I may have
missed a few).
Change-Id: Ifa0573a535addc3354a74e944c0920befb0666be
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Drop 'include <string.h>' when it is not used and
add it when it is missing.
Also extra lines removed, or added just before local includes.
Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Create a new cbtable entry called VBOOT_WORKBUF for
storing a pointer to the vboot workbuf within the
vboot_working_data structure.
BUG=b:124141368, b:124192753
TEST=Build and deploy to eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
BRANCH=none
Change-Id: Id68f43c282939d9e1b419e927a14fe8baa290d91
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31887
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie7afe77053a21bcf6a1bf314570f897d1791a620
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For platforms that do not employ VBOOT_STARTS_IN_ROMSTAGE,
vboot verification occurs before CBMEM is brought online.
In order to make vboot data structures available downstream,
copy vb2_working_data from CAR/SRAM into CBMEM when CBMEM
comes online. Create VBOOT_MIGRATE_WORKING_DATA config
option to toggle this functionality.
BUG=b:124141368, b:124192753
TEST=Built and deployed on eve with STARTS_IN_BOOTBLOCK
TEST=Built and deployed on eve with STARTS_IN_ROMSTAGE
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
BRANCH=none
Change-Id: I62c11268a83927bc00ae9bd93b1b31363b38e8cf
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Before start sorting check for the number of entries in the data set. If
there are less than two entries, sorting makes no sense.
Change-Id: Ib9d5522cdebb6559a025217f7faf318589d55a2c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds dedicated timestamp value for postcar stage.
TEST=Able to see "start of postcar" and "end of postcar" timestamp
while executing cbmem -t after booting to chrome console.
> cbmem -t
951:returning from FspMemoryInit 20,485,324 (20,103,067)
4:end of romstage 20,559,235 (73,910)
100:start of postcar 20,560,266 (1,031)
101:end of postcar 20,570,038 (9,772)
Change-Id: I084f66949667ad598f811d4233b4e639bc4c113e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Until now the TCPA log wasn't working correctly.
* Refactor TCPA log code.
* Add TCPA log dump fucntion.
* Make TCPA log available in bootblock.
* Fix TCPA log formatting.
* Add x86 and Cavium memory for early log.
Change-Id: Ic93133531b84318f48940d34bded48cbae739c44
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
MMIO operations are arch-agnostic so the include
path should not be arch/.
Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When updating firmware, we may need to preserve some sections like VPD,
calibration data, ... etc. The logic can be hard-coded in updater as a
list of known names, but a better solution is to have that directly
declared inside FMAP area flags.
To do that, the first step is to apply the changes in flash map
(http://crosreview.com/1493767). A new FMAP_AREA_PRESERVE is now
defined and will be set in future with new syntax in FMD parser.
BUG=chromium:936768
TEST=make; boots an x86 image.
Change-Id: Idba5c8d4a4c5d272f22be85d2054c6c0ce020b1b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
PCI config accessors are no longer indirectly included
from <arch/io.h> use <device/pci_ops.h> instead.
Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add an implementation for Bubble sort. For now, only integers can be
sorted in an ascending or descending order. It can be later simply
extended to cover other datasets like strings if needed.
The reasons for choosing bubble sort are:
* it is a simple algorithm
* bubble sort is stable, i.e. it does not exchange entries which are not
needed to be sorted as they are already in order
Change-Id: I2c5e0b5685a907243b58ebe6682078272d316bf6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Does not fix 3rdparty/, *.S or *.ld or yet.
Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/17656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This removes CEIL_DIV and div_round_up() altogether and
replace it by DIV_ROUND_UP defined in commonlib/helpers.h.
Change-Id: I9aabc3fbe7834834c92d6ba59ff0005986622a34
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Correct typo of 'compilation'
BUG=N/A
TEST=N/A
Change-Id: Iee6b8a8afc4d885d2d4ab9ee5d596e32e5e6d3f1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
According to newest TCG ACPI Specification for Family 1.2 and 2.0
Version 1.2, Revision 8, TPM2 ACPI table has two more fields LAML and LASA.
Update the table structure definition, create the log area for TPM2 in
coreboot tables and fill the missing fields in TPM2 table. TPM2 should be
now probed well in SeaBIOS rel-1.12.0 or master.
Tested on apu2 with Infineon SLB9665 TT2.0.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie482cba0a3093aae996f7431251251f145fe64f3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/29800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I252a1cd77bf647477edb7dddadb7e527de872439
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In romstage malloc is not available, so use CAR_GLOBAL
variable instead.
BUG=b:78106689
TEST=Boot to OS
Change-Id: If9438d0b707c6ffaa61db80bd1d385112bc91cfc
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/25067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a __always_inline macro that wraps __attribute__((always_inline))
and replace current users with the macro, excluding files under
src/vendorcode.
Change-Id: Ic57e474c1d2ca7cc0405ac677869f78a28d3e529
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/28587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@google.com>
|
|
Since we can derive chromeos_acpi's location from that of
ACPI GNVS, remove chromeos_acpi entry from cbtable and
instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET.
BUG=b:112288216
TEST=None
CQ-DEPEND=CL:1179725
Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/28190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since we can retrieve the address of ACPI GNVS directly
from CBMEM_ID_ACPI_GNVS, there is no need to store and
update a pointer separately.
TEST=Compile and run on Eve
Signed-off-by: Joel Kitching <kitching@google.com>
Change-Id: I59f3d0547a4a724e66617c791ad82c9f504cadea
Reviewed-on: https://review.coreboot.org/28189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: If7650ac4d9be2614a9665c7f2aba9ac5cc413efe
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There is a confusingly named section in cbmem called vdat.
This section holds a data structure called chromeos_acpi_t,
which exposes some system information to the Chrome OS
userland utility crossystem.
Within the chromeos_acpi_t structure, there is a member
called vdat. This (currently) holds a VbSharedDataHeader.
Rename the outer vdat to chromeos_acpi to make its purpose
clear, and prevent the bizarreness of being able to access
vdat->vdat.
Additionally, disallow external references to the
chromeos_acpi data structure in gnvs.c.
BUG=b:112288216
TEST=emerge-eve coreboot, run on eve
CQ-DEPEND=CL:1164722
Change-Id: Ia74e58cde21678f24b0bb6c1ca15048677116b2e
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/27888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
* Make tcpa_log_init static and move init code into
the tcpa_log_add_table_entry routine.
* Add more checks for log initialization.
* Fix minor issues
Change-Id: I215d79eed7ad17c6ab87f0c4b14a282e519ef07d
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27769
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix regression introduced in commit f18dc5c7
"Add TCPA logging functionality":
Introduced TCPA log got overwritten in acpi.c of x86/arch, due to
CBMEM name collision. Use a different cbmem name to have two independent
TCPA logs.
Change-Id: Iac63ac26989080a401aac2273265a263a3fdec56
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/27726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
* Read and print the TCPA ACPI log.
Change-Id: Ie2253d86cfc675d45b0a728794cc784215401f4a
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/26244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
* TCG spec only applies to BIOS or UEFI.
* Therefore implement coreboot TCPA compliant log
in CBMEM.
* Write CBMEM log into the coreboot table for CBMEM tool access
Change-Id: I0a52494f647d21e2587231af26ed13d62b3a72f5
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I8e4118c5c5d70719ad7dc5f9ff9f86d93fa498ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
change sd_mmc_go_idle to be accessible from other files
so that we have an api to send CMD0 and reset the card.
BUG=b:78106689
TEST=Boot to OS
Change-Id: I064a9bded347be5d500047df92d1c448c3392016
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/25066
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to support booting a GNU/Linux payload on non x86, the FIT format
should be used, as it is the defacto standard on ARM.
Due to greater complexity of FIT it is not converted to simple ELF format.
Add support for autodecting FIT payloads and add them as new CBFS_TYPE 'fit'.
The payload is included as is, with no special header.
The code can determine the type at runtime using the CBFS_TYPE field.
Support for parsing FIT payloads in coreboot is added in a follow on
commit.
Compression of FIT payloads is not supported, as the FIT sections might be
compressed itself.
Starting at this point a CBFS payload/ can be either of type FIT or SELF.
Tested on Cavium SoC.
Change-Id: Ic5fc30cd5419eb76c4eb50cca3449caea60270de
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Non of the .c files is using a function from console.h directly.
Include console.h is moved to sd_mmc.h, where sdhc_error("msg..") is
defined.
Change-Id: Ic9283f227a37785056b9fac216fabcac054066a0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26752
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Masked ROMs are the silent killers of boot speed on devices without
memory-mapped SPI flash. They often contain awfully slow SPI drivers
(presumably bit-banged) that take hundreds of milliseconds to load our
bootblock, and every extra kilobyte of bootblock size has a hugely
disproportionate impact on boot speed. The coreboot timestamps can never
show that component, but it impacts our users all the same.
This patch tries to alleviate that issue a bit by allowing us to
compress the bootblock with LZ4, which can cut its size down to nearly
half. Of course, masked ROMs usually don't come with decompression
algorithms built in, so we need to introduce a little decompression stub
that can decompress the rest of the bootblock. This is done by creating
a new "decompressor" stage which runs before the bootblock, but includes
the compressed bootblock code in its data section. It needs to be as
small as possible to get a real benefit from this approach, which means
no device drivers, no console output, no exception handling, etc.
Besides the decompression algorithm itself we only include the timer
driver so that we can measure the boot speed impact of decompression. On
ARM and ARM64 systems, we also need to give SoC code a chance to
initialize the MMU, since running decompression without MMU is
prohibitively slow on these architectures.
This feature is implemented for ARM and ARM64 architectures for now,
although most of it is architecture-independent and it should be
relatively simple to port to other platforms where a masked ROM loads
the bootblock into SRAM. It is also supposed to be a clean starting
point from which later optimizations can hopefully cut down the
decompression stub size (currently ~4K on RK3399) a bit more.
NOTE: Bootblock compression is not for everyone. Possible side effects
include trying to run LZ4 on CPUs that come out of reset extremely
underclocked or enabling this too early in SoC bring-up and getting
frustrated trying to find issues in an undebuggable environment. Ask
your SoC vendor if bootblock compression is right for you.
Change-Id: I0dc1cad9ae7508892e477739e743cd1afb5945e8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/26340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Make cbfsf_file_type public to support detecting the payload type at
runtime. To be used by the following commits.
Possible payload types are:
* simple ELF
* FIT
Change-Id: I37e9fb06f926dc71b001722a6c3b6205a2f20462
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25859
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In some cases callers want to know if a file
exists and, if so, what its type is.
Modify cbfs_locate so that if the pointer is non-NULL,
but has the value 0, the type of the file that
matches the name will be returned.
Change-Id: Ic1349d358c3054207ccbccf3825db56784327ad0
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/26279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On grunt these operations combined take a little over 37ms.
BUG=b:64549506
TEST=built on grunt
511:starting TPM PCR extend 301,268 (598)
512:finished TPM PCR extend 326,710 (25,442)
513:starting locking TPM 326,716 (6)
514:finished locking TPM 339,517 (12,801)
Change-Id: I05cfb3d0f8463f073e329a035484a340546649e1
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/26218
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation of having FIT payloads, which aren't converted to simple ELF,
rename the CBFS type payload to actually show the format the payload is
encoded in.
Another type CBFS_TYPE_FIT will be added to have two different payload
formats. For now this is only a cosmetic change.
Change-Id: I39ee590d063b3e90f6153fe655aa50e58d45e8b0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When the latest AGESA timestamp values were added, the descriptions
weren't added along with them. Because of this, the cbmem tool just
shows them as "<unknown>".
Bug=b:79153552
TEST=None
Change-Id: Iad7bcd53bc6136b74d4d933d1a290feac6a0de56
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/26001
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of writing out '__attribute__((weak))' use a shorter form.
Change-Id: If418a1d55052780077febd2d8f2089021f414b91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Add timestamps before and after the vBIOS load and after the vBIOS
run. This lets us see exactly how long it took to load it from the
ROM chip, and how long it takes to run.
BUG=b:64549506
TEST=Build & boot Grunt, see vBIOS load & initialization times.
Change-Id: I878ba653eb086ad6c6614aa08a6d3fe216a9323e
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/25018
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Leverage the stage_cache mechanism to store a non-specific type
of data. This is not interesting when the location for the cache
is in cbmem. However it will be more useful when an external
location is used, e.g. when the cache is in TSEG, locked from user
modification.
Change-Id: Iaf0b25ebe14c176bbd24fc8942f902f627ca8e6f
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/23518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch stores the correct capabilities for EMMC media which in turn
sets the correct timing data for HS400 mode.
Without this code change, EMMC CMD13 is failing at the end of HS400 mode
switching.
BUG=none
BRANCH=none
TEST=Build and boot Soraka
Change-Id: I3f00c9eace7cc136d86a1e07f040fbfc09e0e02e
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/23541
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
A discussion around the `bytes_per_line` field (it was ignored in
CorebootPayloadPkg for some reason) made the lack of documentation
obvious.
Change-Id: I5e1343b5fe37ac106e61e6907fbcc1737ac56f8b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/23466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Extend the values reserved for AGESA to include the Entry Points used
for S3 Resume.
BUG=b:69614064
Change-Id: I6b50e76a0c49c1f317f9294c5f95735e7aa5d95c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/23439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Write _ROM method and store PCI Option ROM in CBMEM.
Allows an EFI compatible OS to retrieve the Option ROM without the need
to access the PCI BAR. As the Option ROM is no longer present in the
legacy VGA area it's required for mobile platforms. On hybrid devices,
like Lenovo Thinkpads supporting NVIDIA Optimus it's the only way to
retrieve the Option ROM, even with legacy BIOS, as there's no PCI BAR to
map.
Tested on:
* Lenovo T530
* Linux Kernel 4.13.7
* nouveau
Change-Id: I548b730fb64833083cc05af5b21dd6959804224b
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Export region_is_subregion() for determinig if a region is a child of
a parent region.
BUG=b:69614064
Change-Id: I6363fe4fdb33342f9d025a726ec7e17e87adf7e0
Signed-off-by: Aaron Durbn <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=b:70432544
TEST=Build & boot kahlee. Look at timestamps.
Change-Id: I3bf691a0fb1f5c09e7b6c9965c9e506393ec31f6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/22797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On many recent Chrome OS boards, the desire to unite more configurations
under the same image has led to the need of a "SKU ID" that identifies
different configurations of the same board (e.g. with certain optional
components stuffed or not stuffed, or replaced with a comparable
component). This is markedly different from the existing "board ID",
because that is reserved to count "revisions" -- changes made to the
same configuration over time during the development process. This patch
adds support to have a mainboard define this SKU ID and pass it through
the coreboot table like we already have for board IDs.
Change-Id: I8aabffe8e1003b0d6fb70d689ae513ca4b46aeda
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22696
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Merge the different coreboot table strapping ID structures into one
because they're really just all the same, and I want to add more. Make
the signature of the board_id() function return a uint32_t because
that's also what goes in the coreboot table. Add a printk to the generic
code handling strapping IDs in ramstage so that not every individual
mainboard implementation needs its own print. (In turn, remove one such
print from fsp1_1 code because it's in the way of my next patch.)
Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code dealing with the old config string isn't needed anymore,
because the config string has been deprecated in favor of
OpenFirmware-derived devicetrees.
Change-Id: I71398fb4861dbaf7eefc6e6f222bb7159798fafa
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The definition of offsetof() uses size_t, which is declared in stddef.h,
according to POSIX. Include stddef.h directly to avoid relying on
implicit inclusion.
Change-Id: I221be02c332de55c9fcf7d86673709ed43dd5c3c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22230
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Schander <coreboot@mimoja.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When building the Go version of cbmem I found that
LB_TAG_MAC_ADDRS has the same value as LB_TAG_VERSION_TIMESTAMP.
I am guessing that this tag was little used. In any event, move it
forward to 0x33.
Change-Id: I038ad68e787e56903a2ed9cb530809a55821c313
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/22218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In commit c06a3f72 (arch/x86: initialize EBDA in S3 and S0/S5 path)
the BDA and EBDA are wiped in the resume path. However, the coreboot
table forwarding entry wasn't taken into account so that was wiped
which resulted in cbmem not working on the resume path. Fix this
by stashing the forwarding table in cbmem and restoring it on
the resume path.
Change-Id: I142503535a78635fbb1c698fc7d032c1a2921813
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Make the spelling of *romstage* consistent without a space. Choose this
version, as *ramstage* is also spelled without a space, since commit
a7d924412a (timestamps: You can never have enough of them!).
Fixes: 0db924d74c (cbmem: print timestamp names)
Change-Id: I1b1c10393f0afb9a20ac916ff9dc140a51c716cd
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add a timestamp before and after waiting for the ME to acknowledge the
DRAM being ready.
This allows easier debugging during use of me_cleaner and/or alternate
ME images.
Change-Id: Ie228e12a75d373b4f406b3595e1fb1aab41aa5df
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-on: https://review.coreboot.org/21465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The architecture is determined by __riscv__ in the LZ4_copy8 function
(located in src / commonlib / lz4_wrapper.c). __riscv exists in gcc7.1.1.
But __riscv__ does not exist.
Change-Id: I38fd41da9afd76c254f0c3d6984579c3790e5792
Signed-off-by: XiangWang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/20125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Waterman <aswaterman@gmail.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
Fix CID 1376472 detected by coverity. Zero extend the capacity instead
of sign extending it.
TEST=Build and run on reef
Change-Id: I6aac422fb1dacb75e0cc44a94ff1f467ce9f529e
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/20392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|