| Age | Commit message (Collapse) | Author |
|---|
|
gcc12+ will require riscv architecture selection to come not only with
featurei suffixd charactersa, it also comes with feature_ful suffix_ed
words_mith. Much creative, very appreciate.
To accommodate for this madness, enable the already existing (but off by
default) support for that in our gcc11 build, support using by detecting
the compiler's behavior in xcompile and pass that knowledge along to our
build system.
Then cross our fingers and hope for the best!
Change-Id: I5dfeed766626e78d4f8378d9d857b7a4d61510fd
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
That's 3 years of development, including adapting to new, shiny,
Cascade of Attention-Deficit Teenagers[0] induced incompatible
assembler syntaxes.
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
[0] https://web.archive.org/web/20220824045741/https://www.jwz.org/doc/cadt.html
Change-Id: I8606700149ca74e93b85d78546a29df2916d39b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The header file `rules.h` is automatically included in the build by the
top level makefile using the command:
`-include src/soc/intel/common/block/scs/early_mmc.c`.
Similar to `config.h` and 'kconfig.h`, this file does not need to be
included manually, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I23a1876b4b671d8565cf9b391d3babf800c074db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67348
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clear the SMBIOS region before writing SMBIOS tables.
On librem_mini and librem_mini_v2, CBMEM allocations are offset by 4K
for reboots relative to the cold boot. This means the unused SMBIOS
region could contain the first 4K of the ACPI tables from the last boot
(including the signature), which prevents Linux from booting.
The CBMEM 4K offset appears to be due to FSP allocating memory
differently between cold boot and reboot, this appears to be normal and
causes the CBMEM base address to change.
It is not clear why Linux examines an ACPI signature found in this
region, but boot logs over serial confirm that it sees the corrupt
table. The table is supposed to be found just below 1M, and kernel
source appears to look in this region, but it is definitely finding the
corrupt table in CBMEM.
Normal cold boot:
[ 0.008615] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4)
[ 0.008619] ACPI: XSDT 0x0000000099B480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008624] ACPI: FACP 0x0000000099B4A2A0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008634] ACPI: DSDT 0x0000000099B48280 00201F (v02 COREv4 COREBOOT 20110725 INTL 20220331)
...
Reboot with corrupt table:
[ 0.008820] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4)
[ 0.008823] ACPI: XSDT 0x0000000099B480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008828] ACPI: ???G 0x0000000099B4A2A0 20002001 (v00 ?G?$ 47020100 ?, 47020100)
[ 0.008831] ACPI: �y 0x0000000099B4A3C0 54523882 (v67 ?_HID? A�? 65520D4E al T 20656D69)
...
There are no specific errors but it returns to the firmware soon after,
presumably due to a fault. This appears to be so early in the boot
that panic=0 on the kernel command line has no effect.
Test: build/boot Librem Mini, Librem Mini v2 and reboot.
Change-Id: Ia20d0b30160e89e8d96add34d7e0e881f070ec61
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66377
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
fix the following checkpatch errors:
WARNING:BRACES: braces {} are not necessary for any arm of this statement
354: FILE: src/arch/x86/smbios.c:354:
+ if (CONFIG_ROM_SIZE >= 1 * GiB) {
[...]
+ } else {
[...]
WARNING:BRACES: braces {} are not necessary for single statement blocks
561: FILE: src/arch/x86/smbios.c:561:
+ if (leaf_b_threads == 0) {
+ leaf_b_threads = 1;
+ }
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I14c29e4358cad4cd5ef169ebab7079db2129d8fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add support for signed 64-bit division. The implementation mostly
relies on __aeabi_uldivmod, which is already implemented.
ldivmod.S was adapted from CrOS EC version of ldivmod.S:
https://chromium.googlesource.com/chromiumos/platform/ec/+/main/third_party/libaeabi-cortexm0/core/cortex-m0/ldivmod.S
The CrOS EC version was adapted from:
https://github.com/bobbl/libaeabi-cortexm0/blob/master/ldivmod.S
BUG=b:240316722
BRANCH=None
TEST=Signed division works in PSP verstage (runs on ARM)
Change-Id: I53785c732b0fa35a4809bc054f1482c5461ada7b
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Change-Id: I30bbd0288475fbefec55ce294e7963df1de6aa6a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Change-Id: I21b954ce62259bb77d88775c3086cfac17dd90c7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: If0e9fcea680d487c28a965e944b3333bb5a07026
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60696
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: Ief1d069ae0fb19a2179f08c2e9cf416367661e69
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60674
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Add (a, b, c)` with `c = a + b`.
Change-Id: If848d391e5ec33ebfb08515414739dbdd5011e08
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This makes inspection of linker scripts in the build dir a little
easier.
Change-Id: I509faa4cee2c9f066f4e20f6038349e1165a619a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Prepare platforms for linking romstage code in the bootblock.
Change-Id: Ic20799b4d6e3f62cd05791a2bd275000a12cc83c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I187c2482dd82c6c6d1fe1cbda71710ae1a2f54ad
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This moves the die() statement to a common place.
Change-Id: I24c9f00bfee169b4ca57b469c089188ec62ddada
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Since there are many identifiers whose name contain "__unused" in
headers of musl libc, introducing a macro which expands "__unused" to
the source of a util may have disastrous effect during its compiling
under a musl-based platform.
However, it is hard to detect musl at build time as musl is notorious
for having explicitly been refusing to add a macro like "__MUSL__" to
announce its own presence.
Using __always_unused and __maybe_unused for everything may be a good
idea. This is how it works in the Linux kernel, so that would at least
make us match some other standard rather than doing our own thing
(especially since the other compiler.h shorthand macros are also
inspired by Linux).
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I547ae3371d7568f5aed732ceefe0130a339716a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I493d686fb122fb47f0b4dcf34e3635518770f97f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: Iaa99d9dc4cf12a7431be1610d339cf78116f8bea
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
It might be possible to have this used for more than x86, but that
will be for a later commit.
Change-Id: I4968364a95b5c69c21d3915d302d23e6f1ca182f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch contains several minor cleanups related to compiler.h:
- Replace __always_unused() (which is a Linux-specific concept that
doesn't make sense without also having __maybe_unused(), and had zero
uses in the codebase) with __unused() which moves here from helpers.h
- Add __underscores__ to the names of all attributes in the compiler
attribute shorthand macros. This is necessary to make them work in
files where the same name was already used for an identifier (e.g.
cbfstool/cbfs.h's `unused` array of file types).
- Remove libpayload's own copy of compiler.h and make it directly pull
in the commonlib/bsd copy.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9644da594bb69133843c6b7f12ce50b2e45fd24b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Replace `LGreater(a, b)` with `a > b`.
Change-Id: I0cabf4f69191fe345fd72619847db384db2e0e87
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
There are too many "FIT" in firmware land. In order to reduce possible
confusion of CBFS_TYPE_FIT with the Intel Firmware Interface Table, this
patch renames it to CBFS_TYPE_FIT_PAYLOAD (including the cbfstool
argument, so calling scripts will now need to replace `-t fit` with `-t
fit_payload`).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I826cefce54ade06c6612c8a7bb53e02092e7b11a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
FSP needs interrupts disable so also disable generating exceptions
around debug registers.
Change-Id: Ia49dde68d45b71e231aaf32a0e6fd847f0e06146
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64426
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While on it, reformat code and remove unused macro.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I63e413820cb3f4dfa21d1692301348ecdb3190b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ibcbaa39ee3922e1f7add8694d8c7c491881d7124
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Currently, the log message contains an unwanted trailing space, so
remove it.
[ERROR] Null dereference at eip: 0x3ffad01a
Change-Id: I64509ca4bad94c7db4279cc4c1e6fee2bba2e035
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This adds 2 flags:
* invisible opt-in flag for platforms on which clang seems to work
* visible opt-in flag to allow experimenting
Clang seems to work rather well on x86_32 so it makes sense to start
adding that to Jenkins buildtesting, which this allows.
This allows abuild to differentiate between targets that are known to
build with clang. This makes buildtesting just those targets easier.
Change-Id: I46f1bad59bda94f60f4a141237ede11f6eb93cc2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Systems have a lot more cores now and 4KiB is not cutting it. E.g.
for a system with 255 cores more than 16KiB is needed.
We could also make this a Kconfig parameter but it's probably not
worth having such micro optimizations to save a few KiB.
Change-Id: Idd47e55d8d679cc70eae996ee1af3ad7eaa1d0cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I079c99006fea95ba3dc2fb02c95a3747af55e218
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that all AGESA codebases have been fixed to not use the .data
section, the warning workaround can be disabled.
Change-Id: I675d169a5d2f16e1e9ae05f95e045e9ef3d12208
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
With CBFS verification, cbfstool (CB:41121) needs bootblock to be
present in coreboot.pre in order to locate the metadata hash stored in
it. Therefore we have to ensure that bootblock is added to CBFS before
other CBFS files are added.
To solve the problem, create the 'add_bootblock' function, and call it
in the coreboot.pre recipe. Because bootblock.bin is now a prerequisite
of coreboot.pre, it will get built even if CONFIG_BOOTBLOCK_IN_CBFS=n.
BUG=b:233263447
TEST=emerge-guybrush coreboot
TEST=emerge-corsola coreboot chromeos-bootimage
TEST=cbfstool image-kingler.bin print -v
TEST=Kingler booted successfully
BRANCH=none
Change-Id: I385deb8231e44310ee139c3f69f449e75b92b2be
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
All targets now use cbmem for the BERT region, so the implementation can
be common.
This also drops the obsolete comment about the need to have bert in a
reserved region (cbmem gets fixed to be in a reserved region).
Change-Id: I6f33d9e05a02492a1c91fb7af94aadaa9acd2931
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
AGESA has a lot of code in the .data section (initialized data). However
there is no such section in CAR stages as the code runs in XIP mode and
CAR is too small to contain the data section. When the linker can not
match code to a section it will just append it, which is why AGESA
worked at all.
Follow-up patches will attempt to fix AGESA and set Kconfig parameter to
'n'. After all AGESA sources have been fixed, this can be removed.
Change-Id: I311ee17e3c0bd283692194fcee63af4449583d74
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Now that the bootblock isn't added to cbfs anymore, on some targets it's
only conditionally build. One example would be Intel APL where it only
gets build when stitched into an IFWI. This is always done when
compiling for real targets but not by the CI builder. This adds a dummy
target to make sure the bootblock always gets buildtested.
Change-Id: I60601e01a2c370b5c21493b71d51f495bb42f41d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
device.c should not hold arch specific code.
Change-Id: I9dfdb905a83916c0e9d298e1c38da89f6bc5e038
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The MP_IRQ flags can be used in the MP table and the ACPI MADT table.
Move them into acpi.h to avoid pulling in the full mpspec.h which is
only available on x86.
BUG=b:218874489, b:160595155
TEST=Build
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4f1091b7629a6446fa399720b0270556a926401a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63845
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The postcar frame can now be a local variable to that function.
Change-Id: I873298970fff76b9ee1cae7da156613eb557ffbc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Some functions are only called locally.
Change-Id: I96a4e40a225536f62abb2a15c55d333b8604e8cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Setting up postcar MTRRs is done when invd is already called so there
is no reason to do this in assembly anymore.
This also drops the custom code for Quark to set up MTRRs.
TESTED on foxconn/g41m and hermes/prodrive that MTRR are properly set
in postcar & ramstage.
Change-Id: I5ec10e84118197a04de0a5194336ef8bb049bba4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54299
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If a payload did any NULL dereferencing it would be broken and jump
back to coreboot code. This fixes the SeaBIOS, FILO and possibly other
payloads too.
Fixes: 3f01cd14533f ("arch/x86: Add support for catching null
dereferences through debug regs")
TESTED on qemu/i440fx.
Change-Id: I80f69b71f4d0fab3126e4b9f8c8dc7737b372174
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64345
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Stefan Ott <coreboot@desire.ch>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds support for catching null dereferences and execution
through x86's debug registers. This is particularly useful when running
32-bit coreboot as paging is not enabled to catch these through page
faults. This commit adds three new configs to support this feature:
DEBUG_HW_BREAKPOINTS, DEBUG_NULL_DEREF_BREAKPOINTS and
DEBUG_NULL_DEREF_HALT.
BUG=b:223902046
TEST=Ran on nipperkin device, verifying that HW breakpoints work as
expected.
Change-Id: I113590689046a13c2a552741bbfe7668a834354a
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Some targets don't need this as the bootblock is loaded differently.
Change-Id: Ia42448f7e9dd0635c72857fbc1fab54508932721
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Some platforms don't need a top aligned bootblock in cbfs like Intel
APL or modern AMD platforms as the bootblock is loaded differently.
So they don't need the top aligned cbfs bootblock.
To not clutter the main make file move out adding the bootblock.
Change-Id: I4de9d7fedf1ae5a37a3310dd42eb07b44c030930
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The makefiles don't like cbfs file names with spaces in them so update
the file name with '_' instead of spaces. To keep the master header at
the top of cbfs, add a placeholder.
This removes the need to handle the cbfs master header in cbfstool.
This functionality will be dropped in a later CL.
On x86 reserve some space in the linker script to add the pointer.
On non-x86 generate a pointer inside a C struct file.
As a bonus this would actually fix the master header pointer mechanism
on Intel/APL as only the bootblock inside IFWI gets memory mapped.
TESTED on thinkpad X201: SeaBIOS correctly finds the cbfs master
header.
Change-Id: I3ba01be7da1f09a8cac287751497c18cda97d293
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Clang complains about this.
Change-Id: I421d6c5daa373d1537e4ac2243438e7f1f6208d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63067
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move ASL POST code declarations into a common file to avoid redundancy.
Also, provide a dummy implementation when `POST_IO` is not enabled, as
the value of `CONFIG_POST_IO_PORT` can't be used.
Change-Id: I891bd8754f10f16d618e76e1ab88c26164776a50
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
To pave the way for future refactoring commits, drop POST code elements
from the debug.asl file. Only msi/ms7721 includes debug.asl and it does
not use any of it anyway.
Change-Id: Icd73e5c1f700fd7e735bed1668f02da8f9a3adf3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
With the purpose of linking ramstage inside the bootblock we likely
want to skip some ramstage CBMEM hooks and keep those only for
recovering data from earlier stages.
Change-Id: I317173d468073906d76228d1c8cc7bc28aae9e75
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
<arch/cpu.h> is chain included through <cpu/cpu.h>.
Change-Id: I54a837394f67ac2a759907c7212ab947d07338dc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <martinroth@google.com>
|
|
The printed address ranges in the tree (resource allocator and even
some MTRR code) usually shows the range inclusive (meaning from start
address to the real end address of the range). Though there is still
some code in the MTRR context which prints the ranges with an exclusive
end. This patch aligns the printing of ranges in the MTRR code to be
consistent among the tree so that the shown end addresses are now
inclusive.
Change-Id: I0ca292f9cf272564cb5ef1c4ea38f5c483605c94
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Add a stack in .bss for C execution. This will make it easier to move
the setup of MTRRs in C code.
Change-Id: I67cbc988051036b1a0519cec9ed614acede31fd7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
On x86 ramstage is always relocated at runtime in cbmem so there is no
need to have this configurable in Kconfig.
Change-Id: I01b2335d0b82bea8f885ee5ca9814351bbf2aa3c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63215
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is passing through a cb_err from cbfs_prog_stage_load(), so it
should be declared to return that as well.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5510d05953fe8c0e2cb511f01f862b66ced154ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62656
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch aims to make timestamps more consistent in naming,
to follow one pattern. Until now there were many naming patterns:
- TS_START_*/TS_END_*
- TS_BEFORE_*/TS_AFTER_*
- TS_*_START/TS_*_END
This change also aims to indicate, that these timestamps can be used
to create time-ranges, e.g. from TS_BOOTBLOCK_START to TS_BOOTBLOCK_END.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I533e32392224d9b67c37e6a67987b09bf1cf51c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
These helpers are not architecture dependent and it might be used for
different platform.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Ic13a94d91affb7cf65a2f22f08ea39ed671bc8e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62561
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both the HPET_BASE_ADDRESS define from arch/x86/include/arch/hpet.h and
the HPET_ADDRESS Kconfig option define the base address of the HPET MMIO
region which is 0xfed00000 on all chipsets and SoCs in the coreboot
tree. Since these two different constants are used in different places
that however might end up used in the same coreboot build, drop the
Kconfig option and use the definition from arch/x86 instead. Since it's
no longer needed to check for a mismatch of those two constants, the
corresponding checks are dropped too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia797bb8ac150ae75807cb3bd1f9db5b25dfca35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62307
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lance Zhao
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All x86 chipsets and SoCs have the HPET MMIO base address at 0xfed00000,
so define this once in arch/x86 and include this wherever needed. The
old AMD AGESA code in vendorcode that has its own definition is left
unchanged, but sb/amd/cimx/sb800/cfg.c is changed to use the new common
definition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc624051cc6c0f125fa154e826cfbeaf41b4de83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Some Intel southbridges have HPET_MIN_TICKS in their Kconfig files, but
the CONFIG_HPET_MIN_TICKS symbol is used in the common acpi code in
acpi/acpi.c, so define this option in arch/x86/Kconfig to have it
defined in all cases where the function that ends up using this
information gets called. Since we now have the type information for this
Kconfig option in a central place, it can be dropped from the Kconfig
file of the Intel southbridges that change the default value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibe012069dd4b51c15a8fbc6459186ad2ea405a03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62298
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit b433d26ef11b78dda353723ff7c8797d06f76f21 (arch/x86: Define
HPET_ADDRESS_OVERRIDE) added this Kconfig option and referenced the
via/cx700 chipset which has been dropped before the 4.9 release. No SoC
in the current tree selects HPET_ADDRESS_OVERRIDE and all SoCs have
their HPET mapped at 0xfed00000, so drop this unused and no longer
needed Kconfig option.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4021ed6f84473c7a9223323fc8aa5d3f935d8084
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62276
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 0e688b113d7fd98dfdb69cd0a407c8efcd968456 (arch/x86/id.S: Fix
building with clang) broke building with GCC 8.3 so this approach
should work for both GCC 8.3 and clang. The clang error is:
CC bootblock/arch/x86/id.o
/tmp/id-35b17a.s:35:7: error: expected relocatable expression
.long - ver
^
/tmp/id-35b17a.s:36:7: error: expected relocatable expression
.long - vendor
^
/tmp/id-35b17a.s:37:7: error: expected relocatable expression
.long - part
^
Change-Id: Ide3d313800641d4d9b5f79127f84d9fdb4ec2b96
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This reverts commit 0e688b113d7fd98dfdb69cd0a407c8efcd968456.
Reason for revert: Breaks building with GCC 8.3 which is currently
needed to build bootable coreboot images for Ironlake boards:
src/arch/x86/id.S: Assembler messages:
src/arch/x86/id.S:14: Error: value of 4294967344 too large for field of 4 bytes at 48
src/arch/x86/id.S:15: Error: value of 4294967327 too large for field of 4 bytes at 52
src/arch/x86/id.S:16: Error: value of 4294967318 too large for field of 4 bytes at 56
Change-Id: I9e13b15c062bc6598717382b1fedfa120c6d7209
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The following error message is now gone:
CC bootblock/arch/x86/id.o
/tmp/id-35b17a.s:35:7: error: expected relocatable expression
.long - ver
^
/tmp/id-35b17a.s:36:7: error: expected relocatable expression
.long - vendor
^
/tmp/id-35b17a.s:37:7: error: expected relocatable expression
.long - part
^
Tested with BUILD_TIMELESS=1 on x86_32 with gcc. The binary stays the
same.
Change-Id: I930e7b96c4428bcb95ff1903e6a3e7679171ffee
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: Iabfaaee22011a75cc981607d366d61660838ab21
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
It's available in %r3 in bootblock and needs to be passed to payload in
%r27. We use one of two hypervisor's special registers as a buffer,
which aren't used for anything by the code.
Change-Id: I0911f4b534c6f8cacfa057a5bad7576fec711637
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Change-Id: I309be370d66a808b355241fcee880883631f38ce
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57083
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
"hb-mode" is a -machine flag for QEMU. "hb" stands for Hostboot, which
is OpenPower firmware created by IBM.
QEMU for PPC64 can run initial program in two different modes:
* hb-mode=off with load address 0x00000000
* hb-mode=on with load address 0x08000000
Real hardware always loads firmware at 0x08000000 and coreboot shouldn't
require a special build to be run on QEMU.
Memory layout is updated to reflect change of load address.
Change-Id: I1bdc97a095bd46fccc862985b3bd24f4fa5bc054
Signed-off-by: Yaroslav Kurlaev <yaroslav.kurlaev@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: I9895fc0dcc0ab72151f3b2bde409c8556525433d
Signed-off-by: Yaroslav Kurlaev <yaroslav.kurlaev@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
BSS is loaded as part of the bootblock, it is zeroed in the file so it
doesn't have to be cleared explicitly by the code.
Code for clearing is left as a comment along with a warning about alignment
requirements.
Vector operations are sometimes generated for code such as
'uint8_t x[32] = {0}', this results in an exception when vector registers
(VR) are not enabled. VSR (vector-scalar register) operations are also
enabled, there is no reason not to.
Change-Id: I878ef61619eb4a191805c8911d001312a0d717a0
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: I4a244df01f6d15cbefb3b01079f6eec943136983
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ib555ce51294c94b22d9a7c0db84d38d7928f7015
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Change-Id: I58419450dbe34741b4f5b4920f435fdb91e9df22
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Found using:
diff <(git grep -l '<cbfs.h>' -- src/) <(git grep -l 'cbfs_allocator_t\|cbfs_load\|cbfs_ro_load\|cbfs_type_load\|cbfs_ro_type_load\|cbfs_unverified_area_load\|cbfs_map\|cbfs_ro_map\|cbfs_type_map\|cbfs_ro_type_map\|cbfs_unverified_area_map\|cbfs_alloc\|cbfs_ro_alloc\|cbfs_type_alloc\|cbfs_ro_type_alloc\|cbfs_unverified_area_alloc\|cbfs_cbmem_alloc\|cbfs_ro_cbmem_alloc\|cbfs_type_cbmem_alloc\|cbfs_ro_type_cbmem_alloc\|cbfs_unverified_area_cbmem_alloc\|cbfs_preload\|cbfs_unmap\|cbfs_prog_stage_load\|cbfs_get_size\|cbfs_ro_get_size\|cbfs_get_type\|cbfs_ro_get_type\|cbfs_type\|cbfs_file_exists\|cbfs_ro_file_exists\|mem_pool\|cbfs_cache\|cbfs_boot_device\|cbfs_boot_device_find_mcache\|cbfs_boot_device\|cbfs_get_boot_device\|cbfs_init_boot_device\|cbfs_boot_lookup\|cbfs_alloc\|cbfs_unverified_area_alloc\|cbfs_default_allocator_arg\|cbfs_default_allocator\|cbfs_cbmem_allocator\|cbfs_alloc\|cbfs_ro_alloc\|cbfs_type_alloc\|cbfs_ro_type_alloc\|cbfs_unverified_area_alloc\|cbfs_map\|cbfs_ro_map\|cbfs_type_map\|cbfs_ro_type_map\|cbfs_unverified_area_map\|cbfs_load\|cbfs_type_load\|cbfs_ro_load\|cbfs_ro_type_load\|cbfs_unverified_area_load\|cbfs_cbmem_alloc\|cbfs_ro_cbmem_alloc\|cbfs_type_cbmem_alloc\|cbfs_ro_type_cbmem_alloc\|cbfs_unverified_area_cbmem_alloc\|cbfs_get_size\|cbfs_ro_get_size\|cbfs_get_type\|cbfs_ro_get_type\|cbfs_file_exists\|cbfs_ro_file_exists\|cbfs_mdata\|cbfs_find_attr\|cbfs_file_hash' -- src/)|grep "<"
Change-Id: Ib4dca6da1eb66bbba5b6e94fd623f4fcfc2f0741
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Each time the spinlock is acquired a byte is decreased and then the
sign of the byte is checked. If there are more than 128 cores the sign
check will overflow. An easy fix is to increase the word size of the
spinlock acquiring and releasing.
TEST: See that serialized SMM relocation is still serialized on
systems with >128 cores.
Change-Id: I76afaa60669335090743d99381280e74aa9fb5b1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60539
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<types.h> already provides <commonlib/bsd/cb_err.h>, <limits.h>,
<stdbool.h>, <stdint.h> and <stddef.h> headers.
Change-Id: I700b3f0e864ecce3f8b3b66f3bf6c8f1040acee1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Replace `Increment(a)` with `a++`.
Change-Id: I45ce13509f3e93d7d8cd69689604f24b926bcfbc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Replace `Index (FOO, 0)` with `FOO[0]`.
Change-Id: Ief0f855a449d67542d6b1b56a2b76919c4cb8e2c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60562
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Add (a, b, c)` with `c = a + b`.
Change-Id: I10a94406aa7e66eed4fec22f56b7a8802252e781
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
According to util/kbc1126/README.md, for these ECs to work, the
address and size of their two firmware should be written to $s-0x100`
(`$s` means the image size, done with kbc1126_ec_insert), which means
that every existing section (especially those used to store code)
should not overlap this address, otherwise the bootblock will get
damaged when inserting firmwares of the EC.
In this commit, ecfw_ptr is a structure initialized at build time
according to CONFIG_KBC1126_FW1_OFFSET and CONFIG_KBC1126_FW2_OFFSET
(to do so, they should be redefined as hex), and linked to
CONFIG_ECFW_PTR_ADDR within bootblock, so kbc1126_ec_insert is not
needed at build time any more.
Test passed on Elitebook Folio 9470m.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I4f0de0c4d7283e630242fbe84a46e0547783c49e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ib1be1db6f475ad0e1f34703bfe1257d02b86742c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The commit d023909b "treewide: Disable R_AMD64_32S relocation support"
clflush the address stored in _cbmem_top_ptr, which is the same address
cbmem_top() returns, instead of clflush _cbmem_top_ptr itself.
Fix that by providing the correct address to clflush.
Change-Id: If74591e7753cd9c3c097516430a212d416f53e4d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The cpu_relax method is defined for x86. This CL adds a no-op method so
that it can be used in common code.
BUG=b:179699789
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifcb4546ceb2894eeb37589d0282b7e076d7a4747
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
arch/ppc64/include/arch/io.h: use proper instructions for IO operations
Those instrunctions are:
* Load {byte,half,word} and Zero Caching Inhibited indeXed (l*zcix)
* Store {byte,half,word} Caching Inhibited indeXed (st*cix)
for in* and out*, respectively.
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
arch/ppc64/include/arch/io.h: implement istep reporting
Change-Id: Ib65c99888ba2e616893a55dff47d2b445052fa7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
CONFIG(SMP) was an invalid condition to use in cases where one
stage requires spinlocks and another one does not. The
stage not requiring spinlock still required <smp/spinlock.h>
to be implemented with no-op stubs.
This reverts commit 037ee4b556
soc/amd/picasso: Add dummy spinlock for psp_verstage
Change-Id: Iba52febdeee78294f916775ee9ce8a82d6203570
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
List of changes:
1. Create Module Type macros as per Memory Type
(i.e. DDR2/DDR3/DDR4/DDR5/LPDDR4/LPDDR5) and fix compilation
issue due to renaming of existing macros due to scoping the Memory
Type.
2. Use dedicated Memory Type and Module type for `Form Factor`
and `TypeDetail` conversion using `get_spd_info()` function.
3. Create a new API (convert_form_factor_to_module_type()) for
`Form Factor` to 'Module type' conversion as per `Memory Type`.
4. Add new argument as `Memory Type` to
smbios_form_factor_to_spd_mod_type() so that it can internally
call convert_form_factor_to_module_type() for `Module Type`
conversion.
5. Update `test_smbios_form_factor_to_spd_mod_type()` to
accommodate different memory types.
6. Skip fixed module type to form factor conversion using DDR2 SPD4
specification (inside dimm_info_fill()).
Refer to datasheet SPD4.1.2.M-1 for LPDDRx and SPD4.1.2.L-3 for DDRx.
BUG=b:194659789
TEST=Refer to dmidecode -t 17 output as below:
Without this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Unknown
....
With this code change:
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2048 MB
Form Factor: Row Of Chips
....
Change-Id: Ia337ac8f50b61ae78d86a07c7a86aa9c248bad50
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Currently, the MMCONF Kconfigs only support the Enhanced Configuration
Access mechanism (ECAM) method for accessing the PCI config address
space. Some platforms have a different way of mapping the PCI config
space to memory. This patch renames the following configs to
make it clear that these configs are ECAM-specific:
- NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT
- MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT
- MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS
- MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER
- MMCONF_LENGTH --> ECAM_MMCONF_LENGTH
Please refer to CB:57861 "Proposed coreboot Changes" for more
details.
BUG=b:181098581
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max
Make sure Jenkins verifies that builds on other boards
Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
There is no platform in our tree that requires the PCI MMIO ops but
doesn't want the pci_s_* definitions. The only case where we include
the `pci_mmio_cfg.h` header but don't want the pci_s_* functions to
use MMIO is on older x86 platforms, so move the guard there.
Change-Id: Iaeed6ab43ad61b7c0e14572b12bf4ec06b6a26af
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
AMD platforms require the SPI contents to be 64 byte aligned in order to
use the SPI DMA controller.
BUG=b:179699789
TEST=Build guybrush and verify cbfs was invoked with -a 64
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I842c85288acd8f7ac99b127c94b1cf235e264ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Introduce the `smbios_dev_info` devicetree keyword to specify the
instance ID and RefDes (Reference Designation) of onboard devices.
Example syntax:
device pci 1c.0 on # PCIe Port #1
device pci 00.0 on
smbios_dev_info 6
end
end
device pci 1c.1 on # PCIe Port #2
device pci 00.0 on
smbios_dev_info 42 "PCIe-PCI Time Machine"
end
end
The `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` Kconfig option enables using
this syntax to control the generated Type 41 entries. When this option
is enabled, Type 41 entries are only autogenerated for devices with a
defined instance ID. This avoids having to keep track of which instance
IDs have been used for every device class.
Using `smbios_dev_info` when `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` is not
enabled will result in a build-time error, as the syntax is meaningless
in this case. This is done with preprocessor guards around the Type 41
members in `struct device` and the code which uses the guarded members.
Although the preprocessor usage isn't particularly elegant, adjusting
the devicetree syntax and/or grammar depending on a Kconfig option is
probably even worse.
Change-Id: Iecca9ada6ee1000674cb5dd7afd5c309d8e1a64b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The commit 04a40379b has a wrongly written variable, which sets an
IOAPIC register to a wrong value and makes the Linux kernel unable to
boot.
Tested on HP EliteBook 2760p, the kernel boots after this patch.
Change-Id: Ifda7bb61a431dbf9c2df2f738aa806dd6d8097b8
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove the test for count=0 that leaked from drivers/generic/ioapic
implementation. See commit ea2fb8d80 and commit 8cc25d229.
Change-Id: I26944b930851fbea160c844ea46e2faa61c9af8e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The number of redirection table entries (aka interrupt vectors) inside
an I/O APIC may depend of the SKU, with the related register being of
type read/write-once. Provide support utilities to either lock or set
this registers value.
Change-Id: I8da869ba390dd821b43032e4ccbc9291c39e6bab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add system wake-up type in smbios type 1 - system information.
TESTED=On S9S, can override original value and show expected result
using "dmidecode -t 1".
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: If79ba65426f1f18ebb55a0f3ef022bee83c1a93b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
There are two possible code sections where the cpu_info macros can be
included: .code32 and .code64
Doing a `push %eax` while in a .code64 section will result in a compiler
error. This macro manually pushes the 32-bit register onto the stack so
we can share the code between 32 and 64 bit builds.
We also can't implicitly dereference per_cpu_segment_selector because
it's a 32-bit address. Trying to do this results in the following:
E: Invalid reloc type: 11
E: Illegal use of 32bit sign extended addressing at offset 0x1b2
If we load the address first, then dereference it, we can work around
the limitation.
With these fixes, 64-bit builds can now use CPU_INFO_V2.
BUG=b:179699789
TEST=Boot qemu 64 bit build with CPU_INFO_V2 and 4 CPUs. See AP init
work as expected.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4e72a808c9583bb2d0f697cbbd9cb9c0aa0ea2dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
With the recent addition of SMBIOS table 20, the cbmem area on
google/brya0 overflows and
ERROR: Increase SMBIOS size
SMBIOS tables: 2128 bytes.
is seen in the logs.
Therefore, double the size of the SMBIOS area from 2 KiB to 4 KiB to
accomodate more tables as needed. This happens during ramstage so 2k
is not a big deal at this point.
Change-Id: I43aa6a88d176e783cc9a4441b35b8d608c4101cd
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Since cpu_info() is no longer required to use threads, we no longer need
to initialize it in romstage or earlier. This code was also incomplete
since it didn't initialize the %gs segment.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I615b718e9f035ca68ecca9f57d7f4121db0c83b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
We only ever start and execute threads on the BSP. By explicitly
checking to see if the CPU is the BSP we can remove the dependency on
cpu_info. With this change we can in theory enable threads in all
stages.
BUG=b:194391185, b:179699789
TEST=Boot guybrush to OS and verify coop multithreading still works
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iea4622d52c36d529e100b7ea55f32c334acfdf3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58199
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I640d17cdee2bdaa4fe7049ce66a327b58924bc6f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
All boards with DRIVERS_GENERIC_IOAPIC select it.
Presumably the related configuration of routing IRQ0 when
IOAPIC is enabled should be always done to provide i8259
legacy compatibility for payloads.
Change-Id: Ie87816271fa63bba892c8615aa5e72ee68f6ba93
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
If available, use data from MEMINFO CBMEM table and saved handles
from type 17/19 tables to generate type 20 (Memory Device Mapped
Address) SMBIOS table.
Windows 10/11 and some other OSes use this table to report the total
memory available on a given device.
Change-Id: I2574d6209d973a8e7f112eb3ef61f5d26986e47b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58271
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
