summaryrefslogtreecommitdiff
path: root/src/arch
AgeCommit message (Collapse)Author
2016-05-28acpi_device: Add support for writing ACPI Device PropertiesDuncan Laurie
The recent ACPI specification extensions have formally defined a method for describing device information with a key=value format that is modeled after the Devicetree/DTS format using a special crafted object named _DSD with a specific UUID for this format. There are three defined Device Property types: Integers, Strings, and References. It is also possible to have arrays of these properties under one key=value pair. Strings and References are both represented as character arrays but result in different generated ACPI OpCodes. Various helpers are provided for writing the Device Property header (to fill in the object name and UUID) and footer (to fill in the property count and device length values) as well as for writing the different Device Property types. A specific helper is provided for writing the defined GPIO binding Device Property that is used to allow GPIOs to be referred to by name rather than resource index. This is all documented in the _DSD Device Properties UUID document: http://uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf This will be used by device drivers to provide device properties that are consumed by the operating system. Devicetree bindings are often described in the linux kernel at Documentation/devicetree/bindings/ A sample driver here has an input GPIO that it needs to describe to the kernel driver: chip.h: struct drivers_generic_sample_config { struct acpi_gpio mode_gpio; }; sample.c: static void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_generic_sample_config *config = dev->chip_info; const char *path = acpi_device_path(dev); ... acpi_device_write_gpio(&config->mode_gpio); ... acpi_dp_write_header(); acpi_dp_write_gpio("mode-gpio", path, 0, 0, 0); acpi_dp_write_footer(); ... } devicetree.cb: device pci 1f.0 on chip drivers/generic/sample register "mode_gpio" = "ACPI_GPIO_INPUT(GPP_B1)" device generic 0 on end end end SSDT.dsl: Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionInputOnly, "\\_SB.PCI0.GPIO", 0, ResourceConsumer) { 25 } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"mode-gpio", Package () { \_SB.PCI0.LPCB, 0, 0, 1 }} } }) Change-Id: I93ffd09e59d05c09e38693e221a87085469be3ad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14937 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI SPI descriptorsDuncan Laurie
Add required definitions to describe an ACPI SPI bus and a method to write the SpiSerialBus() descriptor to the SSDT. This will be used by device drivers to describe their SPI resources to the OS. SPI devices are not currently enumerated in the devicetree but can be enumerated by device drivers directly. generic.c: void acpi_fill_ssdt_generator(struct device *dev) { struct acpi_spi spi = { .device_select = dev->path->generic.device.id, .device_select_polarity = SPI_POLARITY_LOW, .spi_wire_mode = SPI_4_WIRE_MODE, .speed = 1000 * 1000; /* 1 mHz */ .data_bit_length = 8, .clock_phase = SPI_CLOCK_PHASE_FIRST, .clock_polarity = SPI_POLARITY_LOW, .resource = acpi_device_path(dev->bus->dev) }; ... acpi_device_write_spi(&spi); ... } devicetree.cb: device pci 1e.2 on chip drivers/spi/generic device generic 0 on end end end SSDT.dsl: SpiSerialBus (0, PolarityLow, FourWireMode, 8, ControllerInitiated, 1000000, ClockPolarityLow, ClockPhaseFirst, "\\_SB.PCI0.SPI0", 0, ResourceConsumer) Change-Id: I0ef83dc111ac6c19d68872ab64e1e5e3a7756cae Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14936 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI I2C descriptorsDuncan Laurie
Add required definitions to describe an ACPI I2C bus and a method to write the I2cSerialBus() descriptor to the SSDT. This will be used by device drivers to describe their I2C resources to the OS. The devicetree i2c device can supply the address and 7 or 10 bit mode as well as indicate the GPIO controller device, and the bus speed can be fixed or configured by the driver. chip.h: struct drivers_i2c_generic_config { enum i2c_speed bus_speed; }; generic.c: void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_i2c_generic_config *config = dev->chip_info; struct acpi_i2c i2c = { .address = dev->path->i2c.device, .mode_10bit = dev->path.i2c.mode_10bit, .speed = config->bus_speed ? : I2C_SPEED_FAST, .resource = acpi_device_path(dev->bus->dev) }; ... acpi_device_write_i2c(&i2c); ... } devicetree.cb: device pci 15.0 on chip drivers/i2c/generic device i2c 10.0 on end end end SSDT.dsl: I2cSerialBus (0x10, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.PCI0.I2C0", 0, ResourceConsumer) Change-Id: I598401ac81a92c72f19da0271af1e218580a6c49 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14935 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI GPIO descriptorsDuncan Laurie
Add definitions to describe GPIOs in generated ACPI objects and a method to write a GpioIo() or GpioInt() descriptor to the SSDT. ACPI GPIOs have many possible configuration options and a structure is created to describe it accurately in ACPI terms. There are many shared descriptor fields between GpioIo() and GpioInt() so the same function can write both types. GpioInt shares many properties with ACPI Interrupts and the same types are re-used here where possible. One addition is that GpioInt can be configured to trigger on both low and high edge transitions. One descriptor can describe multiple GPIO pins (limited to 8 in this implementation) that all share configuration and controller and are used by the same device scope. Accurately referring to the GPIO controller that this pin is connected to requires the SoC/board to implement a function handler for acpi_gpio_path(), or for the caller to provide this directly as a string in the acpi_gpio->reference variable. This will get used by device drivers to describe their resources in the SSDT. Here is a sample for a Maxim 98357A I2S codec which has a GPIO for power and channel selection called "sdmode". chip.h: struct drivers_generic_max98357a_config { struct acpi_gpio sdmode_gpio; }; max98357a.c: void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_generic_max98357a_config *config = dev->chip_info; ... acpi_device_write_gpio(&config->sdmode_gpio); ... } devicetree.cb: device pci 1f.3 on chip drivers/generic/max98357a register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPP_C5)" device generic 0 on end end end SSDT.dsl: GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0, ResourceConsumer, ,) { 53 } Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ibf5bab9c4bf6f21252373fb013e78f872550b167 Reviewed-on: https://review.coreboot.org/14934 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-28acpi_device: Add support for writing ACPI Interrupt descriptorsDuncan Laurie
Add definitions for ACPI device extended interrupts and a method to write an Interrupt() descriptor to the SSDT output stream. Interrupts are often tied together with other resources and some configuration items are shared (though not always compatibly) with other constructs like GPIOs and GPEs. These will get used by device drivers to write _CRS sections for devices into the SSDT. One usage is to include a "struct acpi_irq" inside a config struct for a device so it can be initialized based on settings in devicetree. Example usage: chip.h: struct drivers_i2c_generic_config { struct acpi_irq irq; }; generic.c: void acpi_fill_ssdt_generator(struct device *dev) { struct drivers_i2c_generic_config *config = dev->chip_info; ... acpi_device_write_interrupt(&config->irq); ... } devicetree.cb: device pci 15.0 on chip drivers/i2c/generic register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)" device i2c 10 on end end end SSDT.dsl: Interrupt (ResourceConsumer, Edge, ActiveLow, Exclusive,,,) { 31 } Change-Id: I3b64170cc2ebac178e7a17df479eda7670a42703 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-27arch/x86: provide verstage support for CONFIG_C_ENVIRONMENT_BOOTBLOCKAaron Durbin
When CONFIG_C_ENVIRONMENT_BOOTBLOCK is employed there's no need for a chipset specific verstage entry point because cache-as-ram has already been initialized. Therefore, provide a default entry point for verstage in that environment. Change-Id: Idd8f45bd58d3e5b251d1e38cca7ae794b8b77a28 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14971 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-05-24arm64: Add stack dump to exception handlerJulius Werner
Some exceptions (like from calling a NULL function pointer) are easier to narrow down with a dump of the call stack. Let's take a page out of ARM32's book and add that feature to ARM64 as well. Also change the output format to two register columns, to make it easier to fit a whole exception dump on one screen. Applying to both coreboot and libpayload and syncing the output format between both back up. Change-Id: I19768d13d8fa8adb84f0edda2af12f20508eb2db Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14931 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-21device: Add an ACPI device name and path concept to devicesDuncan Laurie
Add a function to "struct device_operations" to return the ACPI name for the device, and helper functions to find this name (either from the device or its parent) and to build a fully qualified ACPI path from the root device. This addition will allow device drivers to generate their ACPI AML in the SSDT at boot, with customization supplied by devicetree.cb, instead of needing custom DSDT ASL for every mainboard. The root device acpi_name is defined as "\\_SB" and is used to start the path when building a fully qualified name. This requires SOC support to provide handlers for returning the ACPI name for devices that it owns, and those names must match the objects declared in the DSDT. The handler can be done either in each device driver or with a global handler for the entire SOC. Simplified example of how this can be used for an i2c device declared in devicetree.cb with: chip soc/intel/skylake # "\_SB" (from root device) device domain 0 on # "PCI0" device pci 19.2 on # "I2C4" chip drivers/i2c/test0 device i2c 1a.0 on end # "TST0" end end end end And basic SSDT generating code in the device driver: acpigen_write_scope(acpi_device_scope(dev)); acpigen_write_device(acpi_device_name(dev)); acpigen_write_string("_HID", "TEST0000"); acpigen_write_byte("_UID", 0); acpigen_pop_len(); /* device */ acpigen_pop_len(); /* scope */ Will produce this ACPI code: Scope (\_SB.PCI0.I2C4) { Device (TST0) { Name (_HID, "TEST0000") Name (_UID, 0) } } Change-Id: Ie149595aeab96266fa5f006e7934339f0119ac54 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14840 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-21acpigen: Add function to generate ToUUID() from a stringDuncan Laurie
acpigen_write_uuid() will generate a ToUUID() 128-bit buffer object for a common universally unique identifier that is passed as a string. The resulting buffer is the UUID in byte format with a specific order of the bytes as described in the ACPI specification: ToUUID (uuid) Compiles to: Buffer (16) { uuid[3], uuid[2], uuid[1], uuid[0], uuid[5], uuid[4], uuid[7], uuid[6], uuid[8], uuid[9], uuid[10], uuid[11], uuid[12], uuid[13], uuid[14], uuid[15] } Change-Id: Ibbeff926883532dd78477aaa2d26ffffb6ef30c0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14838 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-19arch/x86: Include timestamp.c in all stagesAlexandru Gagniuc
timestamp.c was not included in bootblock and postcar. This means that these two stages would use the weak implementation in lib/timestamp.c instead of the arch-specific implementation based on rdtsc. This resulted in using timer_monotonic_get() which resets the timestamps from 0. timer_monotonic_get() only provides per-stage incrementing semantics on x86 because lapic implementation has counting down values. A globally incrementing counter like rdtsc provides the semantics like every other non-x86. On the test configuration, the weak implementation of timestamp_get() returned zero, resulting in wrong timestamps coming from the bootblock, while romstage and ramstage used the arch implementation and returned correct timestamps. This is a great example of why weak functions are dangerous, and how easy it is to miss subtle yet strong interactions between subsystems and the coreboot buildsystem. Change-Id: I656f9bd58a6fc179d9dbbc496c5b684ea9288eb5 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14860 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-17acpigen: Fix ?: operator confusionJonathan Neuschäfer
strlen(string) was on the "negative" side of the selection operator, the side where string is NULL. Change-Id: Ic421a5406ef788c504e30089daeba61a195457ae Reported-by: Coverity Scan (CID 1355263) Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14867 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-16acpigen: Add functions to generate _STA() and _PRW()Duncan Laurie
Add helper functions for generating some common objects: acpigen_write_STA(status) will generate a status method that will indicate the device status as provided: Method (_STA) { Return (status) } Full status byte configuration is possible and macros are provided for the common status bytes used for generated code: ACPI_STATUS_DEVICE_ALL_OFF = 0x0 ACPI_STATUS_DEVICE_ALL_ON = 0xF acpigen_write_PRW() will generate a Power Resoruce for Wake that describes the GPE that will wake a particular device: Name (_PRW, Package (2) { wake, level } Change-Id: I10277f0f3820d272d3975abf34b9a8de577782e5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14795 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-16acpigen: Add an abstracted integer output methodDuncan Laurie
In order to produce smaller AML and not rely on the caller to size the output type appropriately add a helper function that will output an appropriately sized integer. To complete this also add helper functions for outputting the single OpCode for Zero and One and Ones. And finally add "name" variants of the helpers that will output a complete sequence like "Name (_UID, Zero)". Change-Id: I7ee4bc0a6347d15b8d49df357845a8bc2e517407 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14794 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-16acpigen: Add helper functions for stringsDuncan Laurie
Add helper function to emit a string into the SSDT AML bytestream with a NULL terminator. Also add a helper function to emit the string OpCode followed by the string itself. acpigen_emit_string(string) /* Raw string output */ acpigen_write_string(string) /* OpCode followed by raw string */ Change-Id: I4a3a8728066e0c41d7ad6429fad983e6ae6962fe Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14793 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-16acpigen: Add helpers for word/dword outputDuncan Laurie
Add helpers for writing word and dword values in acpigen and use them throughout the file to clean things up: acpigen_emit_word - write raw word acpigen_emit_dword - write raw dword acpigen_write_word - write word opcode and value Change-Id: Ia758d4dd25d0ae5b31be7d51b33866dddd96a473 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14792 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-10arch/arm64: add FRAMEBUFFER region macros to memlayoutLin Huang
BRANCH=none BUG=chrome-os-partner:51537 TEST=build pass Change-Id: Id3dd3a553370eada1e79708dc71afc2d94d6ce93 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0949b0d9ec12eff7edb3d7de738833f29507c332 Original-Change-Id: I8052f86d4d846e5d544911c5b9e323285083fb5c Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/340024 Original-Commit-Ready: Vadim Bendebury <vbendeb@google.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com> Reviewed-on: https://review.coreboot.org/14747 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09smbios: Add SuperTalent SPD IDTimothy Pearson
Change-Id: I5373be7ab55ac3c4f2e4dd753c6ad8e91712ff7e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14738 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09arch/armv7: Fix end index calculation in mmu_config_range_kbVaradarajan Narayanan
BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Change-Id: Ib0fccfe2d103710c006cb3950c65b11b8d596912 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9be5f58bb89ec43d4eb264c94c3f745dcade35dd Original-Change-Id: If50efb55d4974dfcab07d3ae6488c2413b505a1f Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333301 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14657 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins)
2016-05-03arch/x86: Drop CBFS_BASE_ADDRESSPatrick Georgi
It's unused. Change-Id: I50af2b50d2c5a7a24afe9099c5c01d17ce54a6c9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14569 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-03build system: remove CBFSTOOL_PRE1_OPTSPatrick Georgi
It isn't used anymore. Change-Id: Ie554d1dd87ae3f55547466e484c0864e55c9d102 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14567 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-02arch/x86/assembly_entry: allow early post CAR stages to use common codeAaron Durbin
The skylake-based Chromebooks use a separate verstage which runs just after bootblock and prior to romstage. The normal path for romstage would be to reload the gdt, however in the previously described scenario has verstage performing that work. Therefore, provide that path under those conditions. The only difference from the C_ENVIRONMENT_BOOTBLOCK scenario is that the stack should not be reloaded since there's no way to know the top of the stack. Change-Id: Ic39ab52a856233d3042ac02a15ae4816ddfe07c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14548 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-02arch/x86/asembly_entry: reorder conditional stage entry macrosAaron Durbin
The path that just clears CAR_GLOBAL variables and jumps to the stage entry point needs another condition for separate verstage just after bootblock. However, the current conditional is a negative conditional so swap the logic around to make it easier to extend. Change-Id: Iab6682498054715a6eaa0476390da6355238b9bc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14547 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-02lib/coreboot_table: use the architecture dependent table sizeAaron Durbin
Utilize the architecture dependent coreboot table size value from <arch/cbconfig.h> Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14455 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-05-02arch: introduce architecture dependent common variablesAaron Durbin
Stefan and others have discussed their interest in only including options in Kconfig that are directly associated with building a coreboot image. There are variables that are architecture dependent that are utilized in the coreboot infrastructure. To meet that goal, introduce <arch/cbconfig.h> header file which defines variables for the coreboot infrastructure that are architecture dependent but utilized in common infrastructure. Change-Id: Ic4cb9e81bab042797539dce004db0f7ee8526ea6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14454 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-05-02x86/memlayout.h: Do not include data/bss sections in C_ENVIRONMENT_BOOTBLOCKFurquan Shaikh
C_ENVIRONMENT_BOOTBLOCK on x86 is like romstage and uses cache-as-ram separately. It does not use any data/bss sections. Change-Id: I8957f467f01e754fa2d95783466a01daa6c4e51a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-04-21lib: add common write_tables() implementationAaron Durbin
In order to de-duplicate common patterns implement one write_tables() function. The new write_tables() replaces all the architecture-specific ones that were largely copied. The callbacks are put in place to handle any per-architecture requirements. Change-Id: Id3d7abdce5b30f5557ccfe1dacff3c58c59f5e2b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14436 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/coreboot_table: add architecture hooks for adding tablesAaron Durbin
Add a architecture specific function, arch_write_tables(), that allows an architecture to add its required tables for booting. This callback helps write_tables() to be de-duplicated. Change-Id: I805c2f166b1e75942ad28b6e7e1982d64d2d5498 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14435 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/bootmem: allow architecture specific bootmem rangesAaron Durbin
A architecture-specific function, named bootmem_arch_add_ranges(), is added so that each architecture can add entries into the bootmem memory map. This allows for a common write_tables() implementation to avoid code duplication. Change-Id: I834c82eae212869cad8bb02c7abcd9254d120735 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14434 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/x86: remove low coreboot table supportAaron Durbin
In addition to being consistent with all other architectures, all chipsets support cbmem so the low coreboot table path is stale and never taken. Also it's important to note the memory written in to that low area of memory wasn't automatically reserved unless that path was taken. To that end remove low coreboot table support for x86. Change-Id: Ib96338cf3024e3aa34931c53a7318f40185be34c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14432 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/x86: clean up write_tables()Aaron Durbin
There were quite a number of #if/#endif guards in the write_tables() code. Clean up that function by splitting up the subcomponents into their own individual functions. The same ordering and logic is kept maintained. The changes also benefit the goal of using a common core write_tables() logic so that other architectures don't duplicate large swaths of code. Change-Id: I93f6775d698500f25f72793cbe3fd4eb9d01a20c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14431 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch: only print cbmem entries in one placeAaron Durbin
Each arch was calling cbmem_list() in their own write_tables() function. Consolidate that call and place it in common code in write_coreboot_table(). Change-Id: If0d4c84e0f8634e5cef6996b2be4a86cc83c95a9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14430 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch: use Kconfig variable for coreboot table sizeAaron Durbin
Instead of hard coding a #define in each architecture's tables.c for the coreboot table size in cbmem use a Kconfig varible. This aids in aligning on a common write_tables() implementation instead of duplicating the code for each architecture. Change-Id: I09c0f56133606ea62e9a9c4c6b9828bc24dcc668 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14429 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/riscv/tables: remove confusion over write_tables()Aaron Durbin
Apparently the memo was missed about the write_tables() signature. Fix the confusion. Change-Id: I8ef367345dd54584c57e9d5cd8cc3d81ce109fef Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14421 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/power8/tables: remove confusion over write_tables()Aaron Durbin
Apparently the memo was missed about the write_tables() signature. Fix the confusion. Change-Id: I63924be47d3507d2d7ed006a553414f4ac60d2f9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14420 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-15bootblock_crt0: Use CR* macros from cpu/x86/cr.hFurquan Shaikh
Instead of re-defining the macros, include cpu/x86/cr.h in bootblock_crt0.S to re-use already defined macros for accessing CR* flags. Change-Id: Idade02f7a6bc880c9aad3bfacd05ac57b6d04e44 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14359 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-08Change la to li (load immediate)Ronald G. Minnich
This used to build, but will not with newer toolchains. Change-Id: I0f397839eb85977ba18328b0e32040b15a6c3b0f Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/14296 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-04arch/power8: Position bootblock start at reset vectorTimothy Pearson
Change-Id: I99c3b4dd0c4da41b99bc108977079c8069afc0bd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14019 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-04-02lib/prog_loading: introduce prog_segment_loaded()Aaron Durbin
In order to not muddle arch vs chipset implementations provide a generic prog_segment_loaded() which calls platform_segment_loaded() and arch_segment_loaded() in that order. This allows the arch variants to live in src/arch while the chipset/platform code can implement their own. Change-Id: I17b6497219ec904d92bd286f18c9ec96b2b7af25 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14214 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02arch/x86: notify the system when the postcar parameter was updatedAaron Durbin
While rmodule_load() calls arch_segment_loaded() when it's done loading any pieces of code which further modify it, like changing parameters within the program itself, need to notify the rest of the system. Change-Id: Ia3374b58488120ba6279592a77d7f9c6217f1215 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14213 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-23armv7: Word-sized/half-word-sized memory operations for 32/16 bit read/writePaul Kocialkowski
As a follow up to Change-Id: I1fb3fc139e0a813acf9d70f14386a9603c9f9ede, use as builtin compiler hint instead of inline assembly to allow the compiler to generate more efficient code. Change-Id: I690514ac6d8988a6494ad3a77690709d932802b0 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/12083 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-23arch/x86: introduce postcar stage/phaseAaron Durbin
Certain chipsets don't have a memory-mapped boot media so their code execution for stages prior to DRAM initialization is backed by SRAM or cache-as-ram. The postcar stage/phase handles the cache-as-ram situation where in order to tear down cache-as-ram one needs to be executing out of a backing store that isn't transient. By current definition, cache-as-ram is volatile and tearing it down leads to its contents disappearing. Therefore provide a shim layer, postcar, that's loaded into memory and executed which does 2 things: 1. Tears down cache-as-ram with a chipset helper function. 2. Loads and runs ramstage. Because those 2 things are executed out of ram there's no issue of the code's backing store while executing the code that tears down cache-as-ram. The current implementation makes no assumption regarding cacheability of the DRAM itself. If the chipset code wishes to cache DRAM for loading of the postcar stage/phase then it's also up to the chipset to handle any coherency issues pertaining to cache-as-ram destruction. Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-21arch/x86: honor CONFIG_X86_TOP4G_BOOTMEDIA_MAP for verstageAaron Durbin
When CONFIG_X86_TOP4G_BOOTMEDIA_MAP was introduced verstage was not updated. Correct this oversight. Change-Id: I2775c08798906ba0ba55a361407d7d2b52313229 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14142 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-03-18src/arch/x86/acpi.c: Use correct host address width in DMAR ACPI tableJacob Laska
The previous implementation assumed the CPU physical address size to be 40 which is not true of all platforms. Use an existing function to obtain the correct CPU physical address to report in the DMAR ACPI table. Change-Id: Ia79e9dadecc3f5f6a86ce3789b213222bef482b3 Signed-off-by: Jacob Laska <jlaska91@gmail.com> Reviewed-on: https://review.coreboot.org/14102 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-03-15x86: Drop CONFIG_COMPILE_IN_DSDTStefan Reinauer
This option is no longer needed, as FMAP support has been fully integrated in coreboot Change-Id: I6121b31bf946532717ba15e12f5c63d2baa95ab2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-11arch/x86/smbios: fix length calculation for SMBIOS type 17Iru Cai
Different DIMM modules give different SMBIOS type 17 lengths, so we can't use `meminfo->dimm_cnt*len' for entry struct size, otherwise it'll give a wrong SMBIOS size when two or more different DIMMs are installed on the machine. Change-Id: I0e33853f6aa4b30da547eb433839a397d451a8cf Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14008 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-09Makefile: Add build-time overlap check for programs loaded after corebootJulius Werner
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to statically allocate the different memory regions it needs and guarantees at build time that there are no dangerous overlaps between them. At the end of its (ramstage) execution, however, it usually loads a payload (and possibly other platform-specific components) that is not integrated into the coreboot build system and therefore cannot provide the same overlap guarantees through memlayout.ld. This creates a dangerous memory hazard where a new component could be loaded over memory areas that are still in use by the code-loading ramstage and lead to arbitrary memory corruption bugs. This patch fills this gap in our build-time correctness guarantees by adding the necessary checks as a new intermediate Makefile target on route to assembling the final image. It will parse the memory footprint information of the payload (and other platform-specific post-ramstage components) from CBFS and compare it to a list of memory areas known to be still in use during late ramstage, generating a build failure in case of a possible hazard. BUG=chrome-os-partner:48008 TEST=Built Oak while moving critical regions in the way of BL31 or the payload, observing the desired build-time errors. Built Nyan, Jerry and Falco without issues for good measure. Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-05arch/x86: Add common assembly code for stages that run in CARAndrey Petrov
This adds a few assembly lines that are generic enough to be shared between romstage and verstage that are ran in CAR. The GDT reload is bypassed and the stack is reloaded with the CAR stack defined in car.ld. The entry point for all those stages is car_stage_entry(). Change-Id: Ie7ef6a02f62627f29a109126d08c68176075bd67 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13861 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-05arch/x86: document CAR symbols and expose them in symbols.hAndrey Petrov
Attempt to better document the symbol usage in car.ld for cache-as-ram usage. Additionally, add _car_region_[start|end] that completely covers the entire cache-as-ram region. The _car_data_[start|end] symbols were renamed to _car_relocatable_data_[start|end] in the hopes of making it clearer that objects within there move. Lastly, all these symbols were added to arch/symbols.h. Change-Id: I1f1af4983804dc8521d0427f43381bde6d23a060 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13804 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-05Kconfig: hide useless options on ARM.Vladimir Serbinenko
Those options have no effect or lead to compile error on ARM due to fundamental incompatibilities. Add proper "depends on" clauses to hide them. Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13904 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-04arch/x86: always use _start as entry symbol for all stagesAaron Durbin
Instead of keeping track of all the combinations of entry points depending on the stage and other options just use _start. That way, there's no need to update the arch/header.ld for complicated cases as _start is always the entry point for a stage. Change-Id: I7795a5ee1caba92ab533bdb8c3ad80294901a48b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13882 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-04arch/x86: rename reset_vector -> _startAaron Durbin
In order to align the entry points for the various stages on x86 to _start one needs to rename the reset_vector symbol. The section is the same; it's just a symbol change. Change-Id: I0e6bbf1da04a6e248781a9c222a146725c34268a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13881 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-03arch/x86: Allow soc/chipset to set linking addressAndrey Petrov
Until recently x86 romstage used to be linked at some default address. The address itself is not meaningful because the code was normally relocated at address calculated during insertion in CBFS. Since some newer SoC run romstage at CAR it became useful to link romstage code at some address in CAR and avoid relocation during build/run time altogether. Change-Id: I11bec142ab204633da0000a63792de7057e2eeaf Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13860 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-02src/arch/x86/smbios: Add vendorsPatrick Rudolph
Add more manufacturer IDs for vendor: * GSkill * OCZ * Transcend Change-Id: Ic7df76b1310b2c1abea9c5d2d8fd688cb2a713b8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13863 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-25x86/Makefile.inc: Fix redundant addition of memlayout.ld in bootblockFurquan Shaikh
For C_ENVIRONMENT_BOOTBLOCK, memlayout.ld is added by call to early_x86_stage. Remove redundant addition of memlayout.ld in this case. Change-Id: Ibb5ce690ac4e63f7ff5063d5bd04daeeb731e4d7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/13777 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-22die() when attempting to use bounce buffer on non-i386.Vladimir Serbinenko
Only i386 has code to support bounce buffer. For others coreboot would silently discard part of binary which doesn't work and is a hell to debug. Instead just die. Change-Id: I37ae24ea5d13aae95f9856a896700a0408747233 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13750 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-20emulation/qemu-power8: initial mainboard and arch commitRonald G. Minnich
This builds and produces an image. The next step is to get a 'halt' instruction into the boot block and then attach with qemu. I can't get the powerpc64le-linux-gnu-ld.bfd to recognize any output arch but powerpc. That makes no sense to me. Change-Id: Ia2a5fe07a1457e7b6974ab1473539c7447d7a449 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/13704 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-19x86: add coreboot table entry for TSC infoAaron Durbin
The 8254 (Programmable Interrupt Timer) is becoming optional on x86 platforms -- either from saving power or not including it at all. To allow a payload to still use a TSC without doing calibration provide the TSC frequency information in the coreboot tables. That data is provided by code/logic already employed by platform. If tsc_freq_mhz() returns 0 or CONFIG_TSC_CONSTANT_RATE is not selected the coreboot table record isn't created. BUG=chrome-os-partner:50214 BRANCH=glados TEST=With all subsequent patches confirmed TSC is picked up in libpayload. Change-Id: Iaeadb85c2648587debcf55f4fa5351d0c287e971 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13670 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-19lib/coreboot_table: add function to allow arch code to add recordsAaron Durbin
Add lb_arch_add_records() to allow the architecture code to generically hook into the coreboot table generation. BUG=chrome-os-partner:50214 BRANCH=glados TEST=With all subsequent patches confirmed lb_arch_add_records() is called when a strong symbol is provided. Change-Id: I7c69c0ff0801392bbcf5aef586a48388b624afd4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13669 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-19RISC-V: Add more debug info to debug printksAndrew Waterman
Change-Id: I49292e69a5636c675bb8ed7cfe4462ca8189487e Signed-off-by: Andrew Waterman <waterman@cs.berkeley.edu> Reviewed-on: https://review.coreboot.org/13736 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-02-19RISC-V: Make inline asm usage saferAndrew Waterman
Change-Id: Id547c98e876e9fd64fa4d12239a2608bfd2495d2 Signed-off-by: Andrew Waterman <aswaterman@gmail.com> Reviewed-on: https://review.coreboot.org/13735 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-02-18arch/arm64: Compile arm-trusted-firmware with coreboot timestampPatrick Georgi
Update ATF codebase to a version that supports passing a timestamp and fix the format to what it accepts now (including quotes). This provides reproducible builds. Change-Id: I12a0a2ba1ee7921ad93a3a877ea50309136ab1ab Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13726 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-17arch/x86: Add option to disable default mmap_boot implementationAlexandru Gagniuc
On certain platforms, the boot media is either not memory-mapped, or not mapped at the top of 4G. This makes the default mmap_boot implementation unsuitable. Add an option to allow such platforms to define their own mapping implementation. Change-Id: I8293126fd9cc1fd3d75072f7811e659765348e4a Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13x86: make bootblock size for C_ENVIRONMENT_BOOTBLOCK configurableAaron Durbin
Certain platforms may need to limit their bootblock size to within a given size because specific constraints. Allow the size to be provided by the mainboard or chipset by way of the arch Kconfig being processed after those. Change-Id: I46cc6315918cde575070fa2d3e2514f28008f575 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13691 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-12timestamp: Remove HAS_PRECBMEM_TIMESTAMP_REGION KconfigJulius Werner
This patch generalizes the approach previously used for ARM32 TTB_SUBTABLES to "auto-detect" whether a certain region was defined in memlayout.ld. This allows us to get rid of the explicit Kconfig for the TIMESTAMP region, reducing configuration redundancy and avoiding confusion when setting up future boards. (Removing armv4/bootblock_simple.c because it references this Kconfig and it is a dead file that I just forgot to remove in CL:12076.) BRANCH=None BUG=None TEST=Booted Oak and confirmed that all pre-RAM timestamps are still there. Built Nyan and Falco. Change-Id: I557a4b263018511d17baa4177963130a97ea310a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13652 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11arches: lib: add main_decl.h for main() declarationAaron Durbin
It is silly to have a single header to declare the main() symbol, however some of the arches provided it while lib/bootblock.c relied on the arch headers to declare it. Just move the declaration into its own header file and utilize it. Change-Id: I743b4c286956ae047c17fe46241b699feca73628 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13681 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-11arch/{arm64,riscv}: remove jmp_to_elf_entry() declarationAaron Durbin
jmp_to_elf_entry() is not defined anywhere. Remove it. Change-Id: I68f996a735f2ef3dd60cf69f9b72c3f1481cbb55 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13680 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11arch: remove stage_exit()Aaron Durbin
It's no longer used. Remove it. Change-Id: Id6f4084ab9d671e94f0eee76bf36fad9a174ef14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13678 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11arch/x86: Change how BOOTBLOCK_CUSTOM is selected by defaultAndrey Petrov
Currently x86s select BOOTBLOCK_CUSTOM by default. With this change BOOTBLOCK_CUSTOM is selected only if C bootblock isn't. Change-Id: I218f3b4044175b89697790c82c384b0f85a27ade Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13642 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11arch/x86: Allow bootblock code to use CAR_GLOBAL variablesAndrey Petrov
Since cbmem is not initialized in bootblock, CAR_GLOBAL variables can only be accessed directly similar to verstage. Change-Id: Ifc705016290807c49dc8c49b581864cac2ad3f80 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11arch/x86: Reserve space for stack in CAR layoutAndrey Petrov
Some platforms may want to use C code in bootblock so they need writable memory and CAR can be used for it. This change reserves memory in CAR that can be used by bootblock and other CAR stages. Change-Id: I8dec768cf8763dbe235f0ba1339079ebc49cbd9a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13640 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-10arch/arm64: Use correct SPSR.DAIF mask for BL31 and payloadJulius Werner
The PSTATE mask bits for Debug exceptions, external Aborts, Interrupts and Fast interrupts are usually best left unset: under normal circumstances none of those exceptions should occur in firmware, and if they do it's better to get a crash close to the code that caused it (rather than much later when the kernel first unmasks them). For this reason arm64_cpu_init unmasks them right after boot. However, the EL2 payload was still running with all mask bits set, which this patch fixes. BL31, on the other hand, explicitly wants to be entered with all masks set (see calling convention in docs/firmware-design.md), which we had previously not been doing. It doesn't seem to make a difference at the moment, but since it's explicitly specified we should probably comply. BRANCH=None BUG=None TEST=Booted Oak, confirmed with raw_read_daif() in payload that mask bits are now cleared. Change-Id: I04406da4c435ae7d44e2592c41f9807934bbc802 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ba55bc23fbde962d91c87dc0f982437572a69a8 Original-Change-Id: Ic5fbdd4e1cd7933c8b0c7c5fe72eac2022c9553c Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325056 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13596 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10arch/arm64: mmu: Spot check TTB memory attributesJulius Werner
On ARM64, the memory type for accessing page table descriptors during address translation is governed by the Translation Control Register (TCR). When the MMU code accesses the same descriptors to change page mappings, it uses the standard memory type rules (defined by the page table descriptor for the page that contains that table, or 'device' if the MMU is off). Accessing the same memory with different memory types can lead to all kinds of fun and hard to debug effects. In particular, if the TCR says "cacheable" and the page tables say "uncacheable", page table walks will pull stale entries into the cache and later mmu_config_range() calls will write directly to memory, bypassing those cache lines. This means the translations will not get updated even after a TLB flush, and later cache flushes/evictions may write the stale entries back to memory. Since page table configuration is currently always done from SoC code, we can't generally ensure that the TTB is always mapped as cacheable. We can however save developers of future SoCs a lot of headaches and time by spot checking the attributes when the MMU gets enabled, as this patch does. BRANCH=None BUG=None TEST=Booted Oak. Manually tested get_pte() with a few addresses. Change-Id: I3afd29dece848c4b5f759ce2f00ca2b7433374da Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f3947f4bb0abf4466006d5e3a962bbcb8919b12d Original-Change-Id: I1008883e5ed4cc37d30cae5777a60287d3d01af0 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323862 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13595 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03xcompile: Add a way to specify -march=i586Martin Roth
Instead of instructing users to edit xcompile when they want to build a quark platform, give the build a way to set -march=586 so that the quark code will build correctly. The Quark processor does not support the instructions introduced with the Pentium 6 architecture. Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13552 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-02arch/x86: Add second paragraph to license headerMartin Roth
Change-Id: Ic1da46d2abc8d20987048e4ef1e7a776d0c685d6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13555 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-01-30arch/x86: Implement minimal bootblock for C_ENVIRONMENT_BOTOBLOCKAlexandru Gagniuc
Some newer x86 systems can boot from non-memory-mapped boot media (e.g. EMMC). The bootblock may be backed by small amounts of SRAM, or other memory, similar to how most ARM chipsets work. In such cases, we may not have enough code space for romstage very early on. This means that CAR setup and early boot media (e.g. SPI, EMMC) drivers need to be implemented within the limited amount memory of storage available. Since the reset vector has to be contained in this early code memory, the bootblock is the best place to implement loading of other stages. Implement a bootblock which does the minimal initialization, up to, and including switch to protected mode. This then transfers control to platform-specific code. No stack is needed, and control is transferred via a "jmp" such that no stack operations are involved. Change-Id: I009b42b9a707cf11a74493bd4d8c189dc09b8ace Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/13485 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-30arch/x86: Rename bootblock.S to bootblock_romcc.SAlexandru Gagniuc
bootblock.S was used strictly for setting up the system so that the assembly generated by ROMCC could be executed. Since the infrastructure now exists to run a bootblock wihtout ROMCC, rename this file accordingly. this is done to prevent any future confusion. Change-Id: Icbf5804b66b9517f9ceb352bed86978dcf92228f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/11784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-29arch/arm64: Override bl31 timestamp with coreboot build timestampPatrick Georgi
If coreboot's build process is reproducible (eg. using the latest git timestamp as source), bl31 is, too. This requires an arm-trusted-firmware side merge first (in progress) and an update of our reference commit for the submodule, but it also doesn't hurt anything because it merely sets a variable that currently goes unused. Change-Id: If139538a2fab5b3a70c67f4625aa2596532308f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13497 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-01-28Move object files to $(obj)/<class>/Nico Huber
Instead of tagging object files with .<class>, move them to a <class> directory below $(obj)/. This way we can keep a 1:1 mapping between source- and object-file names. The 1:1 mapping is a prerequisite for Ada, where the compiler refuses any other object-file name. Tested by verifying that the resulting coreboot.rom files didn't change for all of Jenkins' abuild configurations. Change-Id: Idb7a8abec4ea0a37021d9fc24cc8583c4d3bf67c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13181 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-01-28Makefile: Make full use of src-to-obj macroNico Huber
There were several spots in the tree where the path to a per class object file was hardcoded. To make use of the src-to-obj macro for this, it had to be moved before the inclusion of subdirs. Which is fine, as it doesn't have dependencies beside $(obj). Tested by verifying that the resulting coreboot.rom files didn't change for all of Jenkins' abuild configurations. Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13180 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-26arch/x86: Drop arch/pciconf.hStefan Reinauer
It's unused, so get rid of it. Change-Id: I28c6dc0208686edc3aabaf624773ea70350c1c8f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13177 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-26src/arch: Update license headers missing paragraph 2Martin Roth
For the coreboot license header, we want to use two paragraphs. See the section 'Common License Header' in the coreboot wiki for more details. Change-Id: I4a43f3573364a17b5d7f63b1f83b8ae424981b18 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13118 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-26arch/x86: move SetCodeSelector to .text segmentPatrick Georgi
It ended up in .data, and that doesn't seem to be actually necessary. Change-Id: Ib17d6f9870379d1b7ad7bbd3f16a0839b28f72c8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13134 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-23arch/x86: link bootblock like other stages for C_ENVIRONMENT_BOOTBLOCKAaron Durbin
When C_ENVIRONMENT_BOOTBLOCK is selected link bootblock using the memlayout.ld scripts and infrastructure. This allows bootblock on x86 to utilize all the other coreboot infrastructure without relying romcc. Change-Id: Ie3e077d553360853bf33f30cf8a347ba1df1e389 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13069 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-23arch/x86: remove .intel_syntaxPatrick Georgi
Replace with the more familiar AT&T syntax. Tested by sha1sum(1)ing the object files, and checking the objdump that the code in question was actually compiled. Change-Id: Ie85b8ee5dad1794864c18683427e32f055745221 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13132 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22arch/arm64: Extend verstageItamar
Add more code to verstage [pg: split downstream commit into multiple commits] Change-Id: I578a69a1e43aad8c90c3914efd09d556920f728e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292662 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/12612 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-21arch/x86: Add files needed for C environment bootblock on x86Alexandru Gagniuc
This provides symbols needed by CBFS and FMAP APIs, and allows running run_romstage() in an x86 bootblock. Note that console-related files are not added in this patch, as they are not essential for the functinality on an x86 environment bootbock. Change-Id: I36558b672a926ab22bc9018cd51aee32213792c2 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/12880 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-21console: Simplify bootblock console Kconfig selection logicAlexandru Gagniuc
Instead of depending BOOTBLOCK_CONSOLE on a set of architectures, allow the arch or platform to specify whether it can provide a C environment. This simplifies the selection logic. Change-Id: Ia3e41796d9aea197cee0a073acce63761823c3aa Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/12871 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-21arch/x86/include: Rename bootblock_common to bootblock_romcc.hAlexandru Gagniuc
This header is only used for the bootblock compiled with ROMCC. As the follow-on patches introduce a bootblock which does not make use of ROMCC, rename this header to prevent confusion. Change-Id: Id29c5bc6928c11cc7cb922fcfac71e5a3dcd113c Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/12867 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-19arch/x86/Makefile.inc: Add a comment to fix syntax highlightingMartin Roth
Trivial fix for syntax highlighting in editors. Some get confused by the double quote that doesn't have a close quote and stop highlighting at that point. This comment closes the quote and the paren pair so that they can recover. Change-Id: I2bdb7c953a86905fc302d77eb9ad1200958800b7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13017 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-19arch/x86: Indent using tabs not spacesMartin Roth
No functional changes - just whitespace fixes. Signed-off-by: Martin Roth <martinroth@google.com> Change-Id: I8ffa87240bcbd3d657ed9dc619b5e5bf9de734d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12853 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-18arch/riscv: Add missing license headersMartin Roth
Most of these files are original to coreboot and get the standard coreboot GPL header. encoding.h and atomic.h are from the riscv codebase and have their license. Change-Id: I32506b0ecf88be2f5794dc1e312a6cd9b2a271ad Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12906 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-01-18arch/x86/Makefile.inc: Update symbol check macroMartin Roth
This was breaking the build on OS X, but also wasn't working correctly under linux anymore either. It wouldn't print the illegal symbols when it failed. - Split the generation of the offenders file from the actual check for offending symbols and just send all output to /dev/null. - Rewrite the check for offending symbols in a way that works with OS X. Tested by adding a global variable to romstage and verifying the failure is shown correctly. Verified that it works correctly with no illegal variables. Change-Id: I5b3ac32448851884d78c3b3449508ffe014119ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13018 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-14arch/x86: add missing license headersMartin Roth
These were mostly written as part of the coreboot project, so get the standard coreboot license header. memmove.c came from the linux kernel, so also gets the standard coreboot v2 license header, but gets the added attribution that it was derived from the linux kernel. Unlike many coreboot files, this file may not be re-licensed as GPL V3. Change-Id: I1fdc26b543e059f7a42d4b886f7222f4c74b959d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12916 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-14arch/x86/include: add missing license headersMartin Roth
These were all written as part of the coreboot project, so get the standard coreboot license header. Change-Id: I51e1e504b3bc7be2a00c9356d8775b87f2a1db5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12912 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-13arch/arm64: add missing license headersMartin Roth
These were all written as part of the coreboot project, so get the standard coreboot license header. Change-Id: I4fccc8055755816be64e9e1a185f1e6fcb2b89ae Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12911 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13arch/arm: add missing license headersMartin Roth
These were all written as part of the coreboot project, so get the standard coreboot license header. Change-Id: I74438e8032c84f4190ef49f306969f7157234001 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12910 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07cpu/amd/microcode: Introduce CBFS access spinlock to avoid IOMMU failureTimothy Pearson
When microcode updates are enabled, this fixes an issue identical to that described in GIT hash 7b22d84d: * drivers/pc80: Add optional spinlock for nvram CBFS access Change-Id: Ib7e8cb171f44833167053ca98a85cca23021dfba Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12063 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-06Revert "x86: Align CBFS on top of ROM"Aaron Durbin
This reverts commit 65e33c08a9a88c52baaadaf515b9591856115a77. This was the wrong logic to fix the master header. Change-Id: I4688034831f09ac69abfd0660c76112deabd62ec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12824 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>