summaryrefslogtreecommitdiff
path: root/src/arch
AgeCommit message (Collapse)Author
2013-12-02Makefile: Drop obsolete rulesKyösti Mälkki
The source files were removed with commit 3e4e3038. Change-Id: I2df9d8cce0ec1462dcba4790a6c62abade0d223c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4298 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-11-26Log device path into CMOS during probe stagesDuncan Laurie
One of the most common hangs during coreboot execution is during ramstage device init steps. Currently there are a set of (somewhat misleading) post codes during this phase which give some indication as to where execution stopped, but it provides no information on what device was actually being initialized at that point. This uses the new CMOS "extra" log banks to store the encoded device path of the device that is about to be touched by coreboot. This way if the system hangs when talking to the device there will be some indication where to investigate next. interrupted boot with reset button and gathered the eventlog after several test runs: 26 | 2013-06-10 10:32:48 | System boot | 120 27 | 2013-06-10 10:32:48 | Last post code in previous boot | 0x75 | Device Initialize 28 | 2013-06-10 10:32:48 | Extra info from previous boot | PCI | 00:16.0 29 | 2013-06-10 10:32:48 | Reset Button 30 | 2013-06-10 10:32:48 | System Reset Change-Id: I6045bd4c384358b8a4e464eb03ccad639283939c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58105 Reviewed-on: http://review.coreboot.org/4230 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26Extend CMOS POST code logging to store extra dataDuncan Laurie
This can be used to indicate sub-state within a POST code range which can assist in debugging BIOS hangs. For example this can be used to indicate which device is about to be initialized so if the system hangs while talking to that device it can be identified. Change-Id: I2f8155155f09fe9e242ebb7204f0b5cba3a1fa1e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58104 Reviewed-on: http://review.coreboot.org/4229 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26cmos post: Guard with spinlockDuncan Laurie
The CMOS post code storage mechanism does back-to-back CMOS reads and writes that may be interleaved during CPU bringup, leading to corruption of the log or of other parts of CMOS. Change-Id: I704813cc917a659fe034b71c2ff9eb9b80f7c949 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58102 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-25x86: fix compile error for !CONFIG_MULTIBOOTAaron Durbin
Some code was previously removed regarding elf notes. However, that code left a dangling comma under !CONFIG_MULTIBOOT configs for inline assembly constraints. Instead, place the comma within the #ifdef stanza. Change-Id: I805453ef57d34fbfb904b4d145d8874921d8d660 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56844 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David James <davidjames@chromium.org> Reviewed-on: http://review.coreboot.org/4207 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25smbios: Add generic type41 write functionDuncan Laurie
Mainboards were defining their own SMBIOS type41 write function. Instead pull this into the generic SMBIOS code and change the existing mainboards to make use of it. Change-Id: I3c8a95ca51fe2a3118dc8d1154011ccfed5fbcbc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56619 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4187 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25x86: call cbfstool update-fit when fit selectedAaron Durbin
In order for the FIT entries to be populated in the table the update-fit command needs to be done on the coreboot image. That way the microcode entries are added to the table properly. Change-Id: I44595aee1ca710f4f04d482d8900cf95fbc1797f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50317 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4159 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25x86: use proper types for interrupt callbacksAaron Durbin
The mainboard_interrupt_handlers() argument for the function pointer was using void * as the type. This does not allow the compiler to catch type differences for the arguments. Thus, some code has been committed which violates the new interrupt callbacks not taking any arguments. Make sure the compiler provides a type checking benefit. Change-Id: Ie20699a368e70c33a9a9912e0fcd63f1e6bb4f18 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48970 Reviewed-on: http://review.coreboot.org/4141 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-19Add GRUB2 payload to build systemVladimir Serbinenko
Since a long time GRUB 2 is a viable payload alternative to SeaBIOS and FILO. So make it easy for coreboot users to use GRUB 2 as a payload by integrating it into coreboot’s build system, so it can be selected in Kconfig. As the last GRUB 2 release 2.00 is too old and has several bugs when used as a coreboot payload only allow to build GRUB 2 master until a new GRUB release is done. The downside is, that accidental breakage in GRUB’s upstream does not affect coreboot users. Currently the GRUB 2 payload is built with the default modules which results in an uncompressed size of around 730 kB. Compressed it has a size of 340 kB, so it should be useable with 512 kB flash ROMs. Tested with QEMU. Change-Id: Ie75d5a2cb230390cd5a063d5f6a5d5e3fab6b354 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4058 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-18smbios: make manufacturer, product_name and uuid runtime settableGerd Hoffmann
Make manufacturer, product_name and uuid smbios fields (type 1) configurable at runtime, simliar to version and serial number. Change-Id: Ibc826225e31fa42aa944fa43632dd6a406d5c85d Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-11-10add memory clobber to ins{b,w,l}Gerd Hoffmann
Change-Id: Ia710eb59f23a52afba2a8ef6e0ff2b2306107245 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4033 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-10-17arch/x86/Makefile.inc: Pass $(AS) and $(CPP) to SeaBIOSAndrew Wu
SeaBIOS’ Makefile requires cpp (C Preprocessor) to build. Modify the xcompile script to search for cpp program path, and pass it to SeaBIOS’ `Makefile.inc`. Also pass the program path for as (GNU assembler). This is needed, so the crossgcc toolchain to build the SeaBIOS payload under Mac OSX. OSX ships a cpp program, but it works differently from GNU CPP, so we need to override it. Change-Id: If996ffbb76ec4bd16079b54b41f3fac07bfe25be Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3896 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2013-10-15CBMEM: Define cbmem_top() just once for x86Kyösti Mälkki
It is expected this will always be a casted get_top_of_ram() call on x86, no reason to do that under chipset. Change-Id: I3a49abe13ca44bf4ca1e26d1b3baf954bc5a29b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3972 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-15Have option of timestamps, CBMEM console and usbdebug for most boardsKyösti Mälkki
As boards without EARLY_CBMEM_INIT do not initialize CBMEM in romstage, and have no CAR migration, these features are available for ramstage only. Change-Id: Ic3f77ccdedd4e71ba693619c02c9b98b328a0882 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3970 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-15CBMEM: Fail builds on missing get_top_of_ram()Kyösti Mälkki
Dummy get_top_of_ram() is removed from romstage to fail already at build-time for cases where cbmem_initialize() would not complete. The mechanisms behind CAR_GLOBAL migration only work correctly when romstage can succesfully make the cbmem_initialize() call. Change-Id: I359820fb196ef187b9aa2e8a3e8f658a0550f237 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3969 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-13Rename cpu/x86/car.h to arch/early_variables.hStefan Reinauer
and add an ARMv7 version. Change-Id: I14fbff88d7c2b003dde57a19bf0ba9640d322156 Signed-off-by: Stefan Reinauer <reinauer@google.com> [km: rebased fa004acf8 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3939 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21ROMCC boards: Fix builds with CBMEM console, timestamps or usbdebugKyösti Mälkki
These features depend on CAR_GLOBAL region, which is not available when romstage is built with ROMCC. Exclude these from romstage, keep them available for ramstage. A follow-up patch will fix the dependencies and allows enabling these features in menuconfig. Change-Id: I9de5ad41ea733655a3fbdc734646f818e39cc471 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3919 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-17ARM: Add some missing dependencies on config.h to ARM's Makefile.inc.Gabe Black
These dependencies came indirectly through kconfig.h which was included automatically with a -include option which was either part of INCLUDES or specified directly. With this change, I'm able to build for beaglebone with make -j 48. Change-Id: Ib57d0c6a755b747165b235c2328c3c30bd6dd67d Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3922 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-11CBMEM: Backup top_of_ram instead of cbmem_tocKyösti Mälkki
AMD northbridges have a complex way to resolve top_of_ram. Once it is resolved, it is stored in NVRAM to be used on resume. TODO: Redesign these get_top_of_ram() functions from scratch. Change-Id: I3cceb7e9b8b07620dacf138e99f98dc818c65341 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Add cbmem_locate_table()Kyösti Mälkki
For both romstage and ramstage, this calls an arch-specific function get_cbmem_table() to resolve the base and size of CBMEM region. In ramstage, the result is cached as the query may be relatively slow involving multiple PCI configuration reads. For x86 CBMEM tables are located right below top of low ram and have fixed size of HIGH_MEMORY_SIZE in EARLY_CBMEM_INIT implementation. Change-Id: Ie8d16eb30cd5c3860fff243f36bd4e7d8827a782 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3558 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM tables: Remove references to global high_tables_baseKyösti Mälkki
Unify checks and writing of CBMEM tables for x86 and ARMv7. Change-Id: I89c012bce1b86d0710748719a8840ec532ce6939 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3559 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Add cbmem_late_set_table() and drop references to high_tables_baseKyösti Mälkki
This helper function is for compatibility only for chipsets that do not implement get_top_of_ram() to support early CBMEM. Also remove references to globals high_tables_base and _size under arch/ and from two ARMv7 boards. Change-Id: I17eee30635a0368b2ada06e0698425c5ef0ecc53 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3902 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM AMD: Fix calls to set_top_of_ram_once()Kyösti Mälkki
We can postpone the call to set_top_of_ram_once() outside the loops and make just one call instead. As set_top_of_ram() is now only called once, it is no longer necessary to check if high_tables_base was already set. Change-Id: I302d9af52ac40c7fa8c7c7e65f82e00b031cd397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3895 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-11CBMEM AMD: Remove references to global high_tables_baseKyösti Mälkki
Prepare for removal of globals high_tables_base and _size by replacing the references with a helper function. Added set_top_of_ram_once() may be called several times, but only the first call (with non-zero argument) takes effect. Change-Id: I5b5f71630f03b6a01e9c8ff96cb78e9da03e5cc3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-31Add Kconfig options for Linux as payloadPatrick Georgi
These allow to define a kernel image, initrd and command line. Change-Id: I40155b812728a176b6d15871e1e6c96e4ad693c8 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/3893 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-08-24Add pnp_devfn_t and use with __SIMPLE_DEVICE__Kyösti Mälkki
Declare the functions that may be used in both romstage and ramstage with simple device model. This will later allow to define PNP access functions for ramstage using the inlined functions from romstage. Change-Id: I2a0bd8194acaf9c4c7252a29376eec363397e3a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3871 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-24Add pci_devfn_t and use with __SIMPLE_DEVICE__Kyösti Mälkki
Declare the functions that may be used in both romstage and ramstage with simple device model. This will later allow to define PCI access functions for ramstage using the inlined functions from romstage. Change-Id: I32ff622883ceee4628e6b1b01023b970e379113f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3508 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-16console: Squelch console output from AP CPUs in romstageKyösti Mälkki
Add Kconfig option SQUELCH_EARLY_SMP and have it enabled by default. Console drivers have unpredictable results if multiple threads attempt to share same resources without spinlock. Serial UARTs have not had huge problems, only distorted output, but those relying on cache-as-ram (CBMEM and usbdebug) may require this. Change-Id: I7f406fdea7b6dc6a341c4da2fab56f7b7ff568b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3854 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-15payload/SeaBIOS: Add SEABIOS_PS2_TIMEOUT Kconfig variablePeter Stuge
This allows mainboards to preconfigure a ps2-keyboard-spinup timeout when SeaBIOS is chosen as the payload. The Kconfig option can be changed manually if CONFIG_EXPERT is set. Change-Id: I5732b18ef04f4bdef6236f35039656ad02011aec Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3734 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-08-05AMD Kabini: Add northbridge AGESA wrapper (new AMD processor)Siyuan Wang
src/arch/x86/boot/tables.c and src/include/device/pci_ids.h are also changed because these two files depend on F16kb northbridge macros Change-Id: Iedc842f0b230826675703fc78ed8001a978319c5 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Bruce Griffith <bruce.griffith@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3782 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-01Add directive __SIMPLE_DEVICE__Kyösti Mälkki
The tests for __PRE_RAM__ or __SMM__ were repeatedly used for detection if dev->ops in the devicetree are not available and simple device model functions need be used. If a source file build for ramstage had __PRE_RAM__ inserted at the beginning, the struct device would no longer match the allocation the object had taken. This problem is fixed by replacing such cases with explicit __SIMPLE_DEVICE__. Change-Id: Ib74c9b2d8753e6e37e1a23fcfaa2f3657790d4c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-25Redefine pci_bus_default_ops as functionKyösti Mälkki
Taking device_t as a parameter, this allows to alter the PCI config access handlers. This is useful to add tracing of PCI config writes for devices having problems to initialise correctly. On older AMD platform PCI MMIO may not be able to fully configure all PCI devices/nodes, while MMIO_SUPPORT_DEFAULT would be preferred due to its atomic nature. So those can be forced to IO config instead. Change-Id: I2162884185bbfe461b036caf737980b45a51e522 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3608 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-22X86: make the SIPI num_starts a config variableRonald G. Minnich
The code to figure out how to set num_starts was starting to get kludgy. It's a constant for a given CPU; constants should be constant; make it a config variable. This change includes an example of how to override it. Build but not boot tested; drivers welcome. Change-Id: Iddd906a707bb16251615c7b42f2bfb5a044379b4 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3796 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-07-15ARM: Define custom ELF headers for ARM.Gabe Black
At least when building with the gnu toolchain, the headers the linker automatically generate save space for the actual ELF headers in one of the loadable segments. This creates two problems. First, the data you intended to be at the start of the image doesn't actually show up there, it's actually the ELF headers. Second, the ELF headers are essentially useless for firmware since there's currently nothing to tell you where they are, and even if there was, there isn't much of a reason to look at them. They're useful in userspace for, for instance, the dynamic linker, but not really in firmware. This change adds a PHDRS construct to each of the linker scripts used on ARM which define a single segment called to_load which does not have the flag set which would tell the linker to put headers in it. The first section defined in the script has ": to_load" to tell the linker which segment to put it in, and from that point on the other sections go in there by default. Change-Id: I24b721eb436d17afd234002ae82f9166d2fcf65d Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3580 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-15SMBIOS: Add smbios_write_type11() for creating an OEM Strings structurePeter Stuge
Change-Id: Id338968429435bac26595c4843b07cdbb91dd64d Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3618 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-14SMBIOS: Allow overriding default Manufacturer and Product namesPeter Stuge
The vendor and part name from coreboot is normally stored in these SMBIOS structure fields, but it can be useful to override them. On Lenovo ThinkPads an override is e.g. needed to convince the Linux thinkpad_acpi.c driver that it is actually running on a ThinkPad. Change-Id: I0dfe38b9f6f99b3376f1547412ecc97c2f7aff2b Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1556 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2013-07-14arm: Add and enable an arch specific version of memmove.Gabe Black
This version is taken from arch/arm/lib/memmove.S in the Linux kernel. Change-Id: Ic875d0cf5b1cb407606530b7f465c406b134f0fa Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3763 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-14x86: Add and enable an arch verson of memmove.Gabe Black
This is from memcpy_32.c in the Linux kernel. There was no copyright header in the original file either. Change-Id: Ifd259cb8a87615dce79ed1e551cc4bacb0414b4f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3762 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-11Move the HAVE_ARCH_* config options from src/arch/x86 to src/.Gabe Black
The options that keep track of whether there are arch versions of the standard string functions shouldn't be in the arch/x86 directory since they apply to all architectures. Move them into the higher level, shared Kconfig defaulting to off. Then, in each applicable arch (currently all of them) they can be selected to on. Change-Id: I7ea64a583230fdc28773f17fd7cc23e0f0a5f3d6 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3760 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-11arm: Add a W() macro for use in kernel assembler.Gabe Black
Some kernel assembly code uses a W macro to optionally add a .w to instructions that need to be 32 bit thumb. The gnu assembler doesn't seem to need the .w and won't assemble if it's provided. Change-Id: I0a288177788b5c61810ee7bd3d2debea66835de2 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3759 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-11Unify PCI configuration cyclesKyösti Mälkki
Split PCI IO configuration and MMIO configuration cycles to separate files. Modern hardware does not use IO cycles for PCI configuration after initial setup in bootblock. Note that the pci_mmio_ and pcie_ functions were different in masking the alignment for register address. PCI standard requires that 16-bit and 32-bit configuration register writes do not cross boundaries. Change-Id: Ie6441283e1a033b4b395e972c18c31277f973897 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3554 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-11Set PCI bus operations at buildtime for ramstageKyösti Mälkki
PCI bus operations are static through the ramstage, and should be initialized from the very beginning. For all the replaced instances, there is no MMCONF_SUPPORT nor MMCONF_SUPPORT_DEFAULT selected for the northbridge, so these continue to use PCI IO config access. Change-Id: I658abd4a02aa70ad4c9273568eb5560c6e572fb1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3607 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10usbdebug: Move ehci_debug_info allocationKyösti Mälkki
Move ehci_debug_info allocation from console to lib, as console code was only built for ramstage. Implement dbgp_ehci_info() to return the EHCI context. Alread alias this as dbgp_console_input() and _output() to return the console stream context later on. Change-Id: Id6cc07d62953f0466df61eeb159e22b0e3287d4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3625 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Don't try to use CBMEM console in bootblockStefan Reinauer
Otherwise we have to worry about hand off between bootblock and romstage. Too much complexity Change-Id: I89bf8a229dba7e1330accadf9a732d831ebc4827 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3694 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: Drop duplicate call to bootblock_cpu_init()Stefan Reinauer
This is already called in ARMv7 bootblock_simple.c so we don't want to do it twice Change-Id: I80cb41035b8a77787e04f2ea58a1cd372cea97d8 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: Don't leave alignment checking on after the exception test.Gabe Black
Currently, the exception handling code on ARM turns on alignment checks as an easy way to generate an exception for testing purposes. It was leaving it on which disabled unaligned accesses for other, unlreated code running later. This change adjusts the code so the original value of the alignment bit is restored after the test exception. Change-Id: Id8d035a05175f9fb13de547ab4aa5496d681d30c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3690 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10arm: Fix memory barrier usage in IO operationHung-Te Lin
The dmb should be executed before reading operations, and before/after writing operations. Change-Id: I572136a2f9a07eb2c38a112f5deeb2de0c0fd46c Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3682 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7a: Enable native memcpy / memsetStefan Reinauer
The code has been there for quite a while but was never enabled. Change-Id: I4ec3dcbb3c03805ac5c75872614e5d394df667cf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3675 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: Tell the linker memset and memcpy are functions.Gabe Black
The memset and memcpy functions are assembled as ARM code, likely because that's the default of the assembler. Without special annotation, the assembler and linker don't know that those symbols are functions which need special handling so that ARM/thumb issues are handled properly. This change adds that annotation which gets those functions working in Coreboot which is compiled as thumb. Libpayload and depthcharge are compiled as ARM so they don't *need* the annotation since it just works out in ARM mode, but it's the safe thing to do in case we change that in the future. We should explicitly select ARM vs. thumb when assembling assembly files to be consistent across builds and toolchains. Change-Id: I814b137064cf46ae9e2744ff6c223b695dc1ef01 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3672 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: Separate the early console (romstage) from the bootblock console.Gabe Black
It might be that you want an early console in romstage before RAM is up, but you can't or don't want to support the console all the way back in the bootblock. By making the console in those two different environments configurable seperately that becomes possible. On the 5250 console output as early as the bootblock works, but on the 5420 it only starts working in the ROM stage after clocks have been initialized. Change-Id: I68ae3fcb4d828fa8a328a30001c23c81a4423bb8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3671 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10arch: clean up Kconfig and MakefileStefan Reinauer
remove some unused code Change-Id: I41602fb391c1910c588a4f9dcc7c2edefe8ab5bc Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3669 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7: Reserve space BL1 and checksum header by specifying bootblock offset.Hung-Te Lin
Not all ARM systems need "BL1", and the layout of BL* and bootblock may be different (ex, Exynos 5250 may use a new BL1 with variable length checksum header). To support that better, define the real base address (and ROM offset) of boot block, and then we can post-processing ROM image file by filling data / checksum and any other information. Change-Id: I0e3105e52500b6b457371ad33a9aa546acf28928 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3664 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10cpu: Add CPU microcode file to cbfs with 16-byte alignmentAaron Durbin
On x86 there is a 16-byte alignment requirement for the addresses containing the CPU microcode. The cbfs files containing the microcode are used in memory-mapped fashion when loading new mircocode. Therefore, the data payload's address/offset of a cbfs file in flash dictates the resulting alignment. Fix this by processing the CPU microcode cbfs file separately as it uses $(CBFSTOOL) to find the proper location within the provided rom image. Change-Id: Ia200d62dbcf7ff1fa59598654718a0b7e178ca4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Drop ELF remains from boot codeStefan Reinauer
This stuff is not used, so let's drop it. Change-Id: I671a5e87855b4c59622cafacdefe466ab3d70143 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3660 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: flatten arch/armv7 source treeStefan Reinauer
With only 19 source files it doesn't make a whole lot of sense to create sub directories in arch/armv7, especially since the files were distributed somewhat randomly. Change-Id: I029c7848e915edf1737e1c401c034837c95d179d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3659 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: Fix up page table/cachability management.Gabe Black
When modifying the page tables, use writel to ensure the writes happen, flush the page tables themselves to ensure they're visible to the MMU if it doesn't look at the caches, and invalidate the right TLB entries. The first two changes are probably safer but may not be strictly necessary. The third change is necessary because we were invalidating the TLB using i which was in megabytes but using an instruction that expects an address in bytes. One symptom of this problem was that the framebuffer, which was supposed to be marked uncacheable, was only being partially updated since some of the updates were still in the cache. With this change the graphics show up correctly. Change-Id: I5475df29690371459b0d37a304eebc62f81dd76b Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3653 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10arch: Fix spellingMartin Roth
Change-Id: Ifea10f0180c0c4b684030a168402a95fadf1a9db Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3727 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: Fix the way the space for the page tables is allocated.Gabe Black
The page tables need to be aligned to a 16KB boundary and are 16KB in size. The CBMEM allocator only guarantees 512 byte alignment, so to make sure things are where they're supposed to be, the code was allocating extra space and then adjusting the pointer upwards. Unfortunately, it was adding the size of the table to the pointer first, then aligning it. Since it allocated twice the space of the table, this had the effect of moving past the first table size region of bytes, and then aligning upwards, pushing the end of the table out of the space allocated for it. You can get away with this if you push things you don't care about off the end, and it happened to be the case that we were allocating a color map we weren't using at the start of the next part of cbmem. Change-Id: I6b196fc573801b02f27f2e667acbf06163266651 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3651 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: Clean up console codeStefan Reinauer
- Guard console_init() with CONFIG_EARLY_CONSOLE in bootblock - Don't initialize console twice in the bootblock - remove printk in memory init that would mess up the UART - unconditionally run console_init() in romstage, as it is also unconditionally run in the bootblock. Change-Id: I8f0d60877433162367074d0e55e01f935fd81f8e Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3647 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: De-uboot-ify Exynos5250 codeStefan Reinauer
When starting the Exynos5250 port, a lot of unneeded u-boot code was imported. This is an attempt to get rid of a lot of unneeded code before the port is used as a basis for further ARM ports. There is a lot more that can be done, including cleaning up the 5250's Kconfig file. Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3642 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Wield battle axe at ARM portStefan Reinauer
This patch unfortunately incorporates a number of changes, all of which are making future ARM ports easier. - drop cruft that came in with u-boot - move serial console from mainboard Kconfig to Exynos Kconfig - factor out non-board specific wakeup code - move generic bootblock code from mainboard to Exynos - actually call arch_cpu_init() - remove dead code - fix up copyright messages - remove snow_ prefix from a lot of code to reduce the noise when creating a new mainboard based on that code. Change-Id: Ic05326edf5a7e1a691c5ff841a604cb9e351b562 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3640 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Drop some duplicates of PCI-e config functionsKyösti Mälkki
These are not specific to Intel. Further work needs to be done to combine these with MMCONF_SUPPORT in arch/io.h. Change-Id: Id429db2df8d47433117c21133d80fc985b3e11e4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Fix MMCONF_SUPPORT_DEFAULT for ramstageKyösti Mälkki
Define at one place whether to use IO 0xcf8/0xcfc or MMIO via MMCONF_BASE_ADDRESS for PCI configuration access funtions in ramstage. The implementation of pci_default_config() always returned with pci_cf8_conf1. This means any PCI configuration access that did not target bus 0 used PCI IO config operations, if PCI MMIO config was not explicitly requested. Change-Id: I3b04f570fe88d022cd60dde8bb98e76bd00fe612 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3606 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-10ARM: Put the ROM stage into the image before other bits.Gabe Black
On ARM, there's frequently some firmware built into the SOC which runs first and which loads other firmware like Coreboot from some other media. To prevent the bootblock from having to know how to find and load the ROM stage from what may be a complicated source (sd card, netbooting, etc.), we can put the ROM stage immediately after the bootblock and ensure that they're both loaded at the same time. This change adjusts the Makefile.inc for ARM so that the ROM stage is put into the image before any other files so that we know it comes first. This changes the behavior of the CONFIG_UPDATE_IMAGE config option used by abuild, although it's not entirely clear whether that's still used. Change-Id: I832386243788156db5f5abbc9760a4e2026cf2cd Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3420 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-06-06qemu: add x86 cpuGerd Hoffmann
This patch adds a qemu x86 cpu chip. It has no initialization function as this isn't needed on virtual hardware. A virtual machine can have pretty much any CPU: qemu emulates a wide range of x86 CPUs (try 'qemu -cpu ? for a list), also with 'qemu -cpu host' the guest will see a cpu which is (almost) identical to the one on the host machine. So I've added X86_VENDOR_ANY as wildcard match for the cpu_table. Change-Id: Ib01210694b09702e41ed806f31d0033e840a863f Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3344 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-04Move the MARK_GRAPHICS_MEM_WRCOMB to x86 architectureRonald G. Minnich
The MARK_GRAPHICS_MEM_WRCOMB was spreading like a cancer since it was defined in sandybridge. It is really more of an x86 thing however, and we now have three systems that can use it. I considered making this more general, since it technically can apply to PTE-based systems like ARM, and maybe we should. But the 'WRCOMB' moniker is usually closely tied to the x86. Change-Id: I3eb6eb2113843643348a5e18e78c53d113899ff8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3349 Tested-by: build bot (Jenkins)
2013-06-02Provide sane Kconfig default for cmos.default.Denis 'GNUtoo' Carikli
Without that fix we have with CONFIG_USE_OPTION_TABLE: OPTION cmos_layout.bin build/util/nvramtool/nvramtool -y /home/gnutoo/x86/coreboot-alix/src/mainboard/pcengines/alix1c/cmos.layout -L build/cmos_layout.bin make: *** No rule to make target `nvramtool', needed by `build/coreboot.pre1'. Stop. rm build/util/sconfig/sconfig.tab.c build/cbfs/fallback/bootblock.elf build/util/sconfig/lex.yy.c That log was captured with make V=1 but the error also appear with make. Tested on the PC Engines ALIX.1C with the following commit (Change-Id: Ia87b090) [1]: PC Engines ALIX.1C: Add CMOS defaults. [1] http://review.coreboot.org/#/c/3323/ Change-Id: I548005a58f430ed7b6da5249a24bbdcae440a1e9 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3223 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-05-20Drop llshellStefan Reinauer
This feature has not been used and was never fully integrated. In the progress of cleaning up coreboot, let's drop it. Change-Id: Ib40acdba30aef00a4a162f2b1009bf8b7db58bbb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3251 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-16x86: add cache-as-ram migration optionAaron Durbin
There are some boards that do a significant amount of work after cache-as-ram is torn down but before ramstage is loaded. For example, using vboot to verify the ramstage is one such operation. However, there are pieces of code that are executed that reference global variables that are linked in the cache-as-ram region. If those variables are referenced after cache-as-ram is torn down then the values observed will most likely be incorrect. Therefore provide a Kconfig option to select cache-as-ram migration to memory using cbmem. This option is named CAR_MIGRATION. When enabled, the address of cache-as-ram variables may be obtained dynamically. Additionally, when cache-as-ram migration occurs the cache-as-ram data region for global variables is copied into cbmem. There are also automatic callbacks for other modules to perform their own migration, if necessary. Change-Id: I2e77219647c2bd2b1aa845b262be3b2543f1fcb7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3232 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-14x86: add thread supportAaron Durbin
Thread support is added for the x86 architecture. Both the local apic and the tsc udelay() functions have a call to thread_yield_microseconds() so as to provide an opportunity to run pending threads. Change-Id: Ie39b9eb565eb189676c06645bdf2a8720fe0636a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3207 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14coreboot: add thread cooperative multitaskingAaron Durbin
The cooperative multitasking support allows the boot state machine to be ran cooperatively with other threads of work. The main thread still continues to run the boot state machine (src/lib/hardwaremain.c). All callbacks from the state machine are still ran synchronously from within the main thread's context. Without any other code added the only change to the boot sequence when cooperative multitasking is enabled is the queueing of an idlle thread. The idle thread is responsible for ensuring progress is made by calling timer callbacks. The main thread can yield to any other threads in the system. That means that anyone that spins up a thread must ensure no shared resources are used from 2 or more execution contexts. The support is originally intentioned to allow for long work itesm with busy loops to occur in parallel during a boot. Note that the intention on when to yield a thread will be on calls to udelay(). Change-Id: Ia4d67a38665b12ce2643474843a93babd8a40c77 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3206 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10Drop prototype guarding for romccStefan Reinauer
Commit "romcc: Don't fail on function prototypes" (11a7db3b) [1] made romcc not choke on function prototypes anymore. This allows us to get rid of a lot of ifdefs guarding __ROMCC__ . [1] http://review.coreboot.org/2424 Change-Id: Ib1be3b294e5b49f5101f2e02ee1473809109c8ac Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3216 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-08copy_and_run: drop boot_complete parameterStefan Reinauer
Since this parameter is not used anymore, drop it from all calls to copy_and_run() Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-07x86 I/O APIC: Dump I/O APIC regs in `ioapic.c`Paul Menzel
Some southbridges have code in their `lpc.c` files to dump the I/O APIC registers. printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); for (i=0; i<3; i++) { *ioapic_index = i; printk(BIOS_SPEW, " reg 0x%04x:", i); reg32 = *ioapic_data; printk(BIOS_SPEW, " 0x%08x\n", reg32); } Add similar code to `src/arch/x86/lib/ioapic.c` so all boards using the function `set_ioapic_id()` get the debug feature and the other boards can be more easily adapted in follow-up patches. Change-Id: Ic59c4c2213ed97bdf3798b3dc6e7cecc30e135d8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3184 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-05-07x86 I/O APIC: Make functions `io_apic_{read,write}()` publicPaul Menzel
Some LPC initialiation can save some lines of code when being able to use the functions `io_apic_read()` and `io_apic_write()`. As these two functions are now public, remove them from the generic driver as otherwise we get a build errors like the following. […] Building roda/rk9; i386: ok, using i386-elf-gcc Using payload /srv/jenkins/payloads/seabios/bios.bin.elf Creating config file... (blobs, ccache) ok; Compiling image on 4 cpus in parallel .. FAILED after 12s! Log excerpt: coreboot-builds/roda_rk9/arch/x86/lib/ramstage.o: In function `io_apic_write': /srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/arch/x86/lib/ioapic.c:32: multiple definition of `io_apic_write' coreboot-builds/roda_rk9/drivers/generic/ioapic/ramstage.o:/srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/drivers/generic/ioapic/ioapic.c:22: first defined here collect2: error: ld returned 1 exit status make: *** [coreboot-builds/roda_rk9/generated/coreboot_ram.o] Error 1 make: *** Waiting for unfinished jobs.... […] Change-Id: Id600007573ff011576967339cc66e6c883a2ed5a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3180 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-05-01armv7: invalidate TLB entries as they are added/modifiedDavid Hendricks
The old approach was to invalidate the entire TLB every time we set up a table entry. This worked because we didn't turn the MMU on until after we had set everything up. This patch uses the TLBIMVAA wrapper to invalidate each entry as it's added/modified. Change-Id: I27654a543a2015574d910e15d48b3d3845fdb6d1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3166 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-01ARMV7: add a function to disable MMU entriesRonald G. Minnich
It is useful to be able to lock out certain address ranges, NULL being the most important example. void mmu_disable_range(unsigned long start_mb, unsigned long size_mb) will allow us to lock out selected virtual addresses on MiB boundaries. As in other ARM mmu functions, the addresses and quantities are in units of MiB. Change-Id: If516ce955ee2d12c5a409f25acbb5a4b424f699b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3160 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-01armv7: add wrapper for tlbimvaaDavid Hendricks
This adds an inline wrapper for the TLBIMVAA instruction (invalidate unified TLB by MVA, all address space identifiers). Change-Id: Ibcd289ecedaba8586ade26e36c177ff1fcaf91d3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3161 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-01x86: use boot state callbacks to disable rom cacheAaron Durbin
On x86 systems there is a concept of cachings the ROM. However, the typical policy is that the boot cpu is the only one with it enabled. In order to ensure the MTRRs are the same across cores the rom cache needs to be disabled prior to OS resume or boot handoff. Therefore, utilize the boot state callbacks to schedule the disabling of the ROM cache at the ramstage exit points. Change-Id: I4da5886d9f1cf4c6af2f09bb909f0d0f0faa4e62 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3138 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01coverage: use boot state callbacksAaron Durbin
Utilize the static boot state callback scheduling to initialize and tear down the coverage infrastructure at the appropriate points. The coverage initialization is performed at BS_PRE_DEVICE which is the earliest point a callback can be called. The tear down occurs at the 2 exit points of ramstage: OS resume and payload boot. Change-Id: Ie5ee51268e1f473f98fa517710a266e38dc01b6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3135 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01acpi: split resume check and actual resume codeAaron Durbin
It's helpful to provide a distinct state that affirmatively describes that OS resume will occur. The previous code included the check and the actual resuming in one function. Because of this grouping one had to annotate the innards of the ACPI resume path to perform specific actions before OS resume. By providing a distinct state in the boot state machine the necessary actions can be scheduled accordingly without modifying the ACPI code. Change-Id: I8b00aacaf820cbfbb21cb851c422a143371878bd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3134 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01boot state: schedule static callbacksAaron Durbin
Many of the boot state callbacks can be scheduled at compile time. Therefore, provide a way for a compilation unit to inform the boot state machine when its callbacks should be called. Each C module can export the callbacks and their scheduling requirements without changing the shared boot flow code. Change-Id: Ibc4cea4bd5ad45b2149c2d4aa91cbea652ed93ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3133 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-26armv7: invoke intermediate build rulesDavid Hendricks
This adds $$(INTERMEDIATE) as a pre-requisite for coreboot.rom on armv7. It is modeled after the $(obj)/coreboot.rom rule for x86. Change-Id: I483a88035fa2288829b6e042e51ef932c8c4f23c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2095 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-18spkmodem consoleVladimir Serbinenko
Change-Id: Ie497e4c8da05001ffe67c4a541bd24aa859ac0e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/2987 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-17armv7/exynos5250: Deprecate sdelay in favor of udelayDavid Hendricks
This gets rid of the clock-tick based sdelay in favor of udelay(). udelay() is more consistent and easier to work with, and this allows us to carry one less variation of timers (and headers and sources...). Every 1 unit in the sdelay() argument was assumed to cause a delay of 2 clock ticks (@1.7GHz). So the conversion factor is roughly: sdelay(N) = udelay(((N * 2) / 1.7 * 10^9) * 10^6) = udelay((N * 2) / (1.7 * 10^3)) The sdelay() periods used were: sdelay(100) --> udelay(1) sdelay(0x10000) --> udelay(78) (rounded up to udelay(100)) There was one instance of sdelay(10000), which looked like sort of a typo since sdelay(0x10000) was used elsewhere. sdelay(10000) should approximate to about 12us, so we'll stick with that for now and leave a note. Change-Id: I5e7407865ceafa701eea1d613bbe50cf4734f33e Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3079 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-13Exynos5250: add a microsecond timerRonald G. Minnich
Add a microsecond timer, its declaration, the function to start it, and its usage. To start it, one calls timer_start(). From that point on, one can call timer_us() to find microseconds since the timer was started. We show its use in the bootblock. You want it started very early. Finally, the delay.h change having been (ironically) delayed, we create time.h and have it hold one declaration, for the timer_us() and timer_start() prototype. We feel that these two functions should become the hardware specific functions, allowing us to finally move udelay() into src/lib where it belongs. Change-Id: I19cbc2bb0089a3de88cfb94276266af38b9363c5 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3073 Tested-by: build bot (Jenkins)
2013-04-11ARM: Unmask aborts very early in the bootblock.Gabe Black
It's better to recognize aborts when they occur than to mask them to discover them later without knowing where they actually came from. Change-Id: Ic8f5321415f411afac94b5ef9dd440790df6d82c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3065 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-10armv7: replace read/write macros with inlinesDavid Hendricks
This enables type checking for safety as to help prevent errors like http://review.coreboot.org/#/c/3038/ . Now compilation fails if the wrong type is passed into readb/readw/readl/writeb/writew/writel or other macros in io.h. This also deprecates readw/writew. The previous definition was 16-bits which is incorrect since wordsize on ARMv7 is 32-bits and there was only 1 instance of writew (#if 0'd anyway). Going forward we should always use read{8,16,32} and write{8,16,32} where N specifies the exact length rather than relying on ambiguous definition of wordsize. Since many macros relied on __raw_*, which were basically the same (minus data memory barrier instructions), this patch also gets rid of __raw_*. There were parts of the code which ended up using these macros consecutively, for example: setbits_le32(&regs->ch_cfg, SPI_CH_RST); clrbits_le32(&regs->ch_cfg, SPI_CH_RST); In such cases the safe versions of readl() and writel() should be used anyway. Note: This also fixes two dubious casts as to avoid breaking compilation. Change-Id: I8850933f68ea3a9b615d00ebd422f7c242268f1c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3045 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08armv7: specify condition code for msr instructionDavid Hendricks
This adds condition codes when using the msr instruction. Although described as "optional" in the Cortex-A series programmer's guide, our experience with using the msr instruction in the payload suggests that the condition code is not optional and that this only worked in coreboot (and u-boot) because the processor comes up in SVC32 mode. (credit to Gabe Black for finding this, I'm only uploading the patch) Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I0aa4715ae415e1ccc5719b7b55adcd527cc1597b Reviewed-on: http://review.coreboot.org/3037 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-03Add PXE ROM selection to Kconfig menuSiyuan Wang
Adding a pxe rom manually is inconvenient. With this patch, PXE ROM can be added automatically by selecting PXE_ROM in Kconfig. I have tested this patch on AMD Parmer and Thatcher with iPXE. iPXE would be a boot device in Seabios when pressing F12. iPXE works well with coreboot and Seabios. Change-Id: I2c4fc73fd9ae6c979f0af2290d410935f600e2c8 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01lynxpoint: Move ACPI NVS into separate CBMEM tableDuncan Laurie
The ACPI NVS region was setup in place and there was a CBMEM table that pointed to it. In order to be able to use NVS earlier the CBMEM region is allocated for NVS itself during the LPC device init and the ACPI tables point to it in CBMEM. The current cbmem region is renamed to ACPI_GNVS_PTR to indicate that it is really a pointer to the GNVS and does not actually contain the GNVS. Change-Id: I31ace432411c7f825d86ca75c63dd79cd658e891 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2970 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01boot: add disable_cache_rom() functionAaron Durbin
On certain architectures such as x86 the bootstrap processor does most of the work. When CACHE_ROM is employed it's appropriate to ensure that the caching enablement of the ROM is disabled so that the caching settings are symmetric before booting the payload or OS. Tested this on an x86 machine that turned on ROM caching. Linux did not complain about asymmetric MTRR settings nor did the ROM show up as cached in the MTRR settings. Change-Id: Ia32ff9fdb1608667a0e9a5f23b9c8af27d589047 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-30x86: Drop BOARD_HAS_FADTKyösti Mälkki
There is a wildcard rule to include mainboard/fadt.c. Change-Id: I7f59d6b241c683b62c2c41c5795e45184882635e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2940 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-30armv7: change some unsigned ints to uint32_tDavid Hendricks
Use register-sized types in case the inline assembler doesn't do so automatically. Change-Id: I3202ba972ef2548323fe557f45dc4b0b1cf6c818 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2983 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: remove loop from dcache_mmu_disable()David Hendricks
dcache_mmu_disable() no longer needs to have its own iterative loop to select each cache level of cache since dcache_clean_invalidate_all() does that now. Change-Id: I5ca273f98943981b943c1c1622f4574d7133fb50 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2967 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 01:03:28 +0000