| Age | Commit message (Collapse) | Author |
|---|
|
Processing LD flags is done without most warnings enabled, which is why
this never caused problems.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic9d82c1426a1c1d2f21c8e7560685cf9d7106a88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75033
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only expand these strings in lib/identity.o.
Change-Id: I8732bbeff8cf8a757bf32fdb615b1d0f97584585
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For AMD, replace name RTC_ALT_CENTURY with RTC_CLK_ALTCENTURY
that points to same offset. Since the century field inside
RTC falls within the NVRAM space, and could interfere with
OPTION_TABLE, it is now guarded with config USE_PC_CMOS_ALTCENTURY.
There were no reference for the use of offset 0x48 for century.
Change-Id: I965a83dc8daaa02ad0935bdde5ca50110adb014a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74601
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
walkcbfs_asm is a simple CBFS implementation in assembly to find a file
on a system with memory-mapped SPI flash. It seems to be mostly unused
nowadays and is only still called for early microcode loading on some
old systems (e.g. FSP 1.1 and older).
Using this implementation with CONFIG_CBFS_VERIFICATION is unsafe
because it does not verify the hashes the way the normal CBFS code does.
Therefore, to avoid potential security vulnerabilities from creeping in,
this patch makes sure the code cannot be compiled in when
CBFS_VERIFICATION is active. That means it won't be supported on the old
boards using this for microcode loading.
Ideally CONFIG_CBFS_VERIFICATION should have a `depends on` to make this
dependency more obvious in menuconfig, but the configs actually using
this code are not easy to untangle (e.g. CONFIG_MICROCODE_UPDATE_PRE_RAM
is just set everywhere by default although only very few boards are
really using it, and a lot of different old Intel CPU models are linking
in src/cpu/intel/car/non-evict/cache_as_ram.S without being united under
a single Kconfig so that's not easy to change). To keep things simple,
this patch will just prevent the code from being built and result in a
linker error if a bad combination of Kconfigs is used together. Later
patches can clean up the Kconfigs to better wrap that dependency if the
affected boards are still of enough interest to be worth that effort.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I614a1b05881aa7c1539a7f7f296855ff708db56c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Instead of having multiple instances of the same magic numbers in the
code, introduce and use the PCI_IO_CONFIG_INDEX and PCI_IO_CONFIG_DATA
definitions.
TEST=Timeless build for Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If6f6f058180cf36cae7921ce3c7aaf1a0c75c7b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I80aa71b813ab8e50801a66556d45ff66804ad349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74600
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
According to ACPI Release 6.5 systems supporting PIC (i8259)
interrupt mechanism need to report IRQ vector for the SCI_INT
field. In PIC mode only IRQ0..15 are allowed hardware vectors.
This change should cover section 5.2.9 to not pass SCI_INT
larger than IRQ15. Section 5.2.15.5 needs follow-up work.
Care should be taken that ioapic_get_sci_pin() is called
after platform code has potentially changed the routing
from the default.
It appears touched all platforms except siemens/mc_aplX
currently program SCI as IRQ9.
Change-Id: I723c207f1dcbba5e6fc0452fe1dbd087fad290ee
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The reference to a constant FCH IOAPIC interrupt count used
with GNB IOAPIC was a bit obscure.
Change-Id: I2d862e37424f9fea7f269cd09e9e90056531b643
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
It's quite confusing to keep track of lapic ID inside the device
struct and initial lapic ID inside an array.
Change-Id: I4d9f8d23c0b0e5c142f6907593428d8509e4e7bb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64342
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ic228b869aea362c1f07e0808c2735ff3b285a6bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73980
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add socket type for Meteor Lake as PROCESSOR_UPGRADE_OTHER.
BUG=None
TEST=processor upgrade is equal to "Other" for "dmidecode -t 4"
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: If891990436a0679697e292b460eaec63c09e7bf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Macros should not use a trailing semicolons. Remove those from
'LONG_DOWNTO8' aswell as 'LONG_DOWNTO16' and add them at places where
the macros are used.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: I5ba01bc09f9a2d9ecd54014e27ec0a24c7297412
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Print IOAPIC ID for GSI #0 in logs, as part of IOAPIC initialization.
BUG=None
TEST=Confirmed "IOAPIC: ID = 0x00" printed in logs.
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: I8d8e94fe623795d059ec2abbb3319b60fd80f5ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
fix compilation on musl-libc systems by providing an implementation
for __always_inline
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I01a7eb9ed28e79523623ab362510ec2d93f4a8b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73667
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When cbmem is initialized in romstage and postcar placed in the stage
cache + cbmem where it is run, the assumption is made that these are
all in UC memory such that calling INVD in postcar is OK.
For performance reasons (e.g. postcar decompression) it is desirable
to cache cbmem and the stage cache during romstage.
Another reason is that AGESA sets up MTRR during romstage to cache all
dram, which is currently worked around by using additional MTRR's to
make that UC.
TESTED on asus/p5ql-em, up/squared on both regular and S3 resume
bootpath. Sometimes there are minimal performance improvements
when cbmem is cached (few ms).
Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37196
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ice15f0ce591104a2ace186f9049748219c2bc097
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Instead of having a magic entry in the CPU device ID table list to tell
find_cpu_driver that it has reached the end of the list, introduce and
use CPU_TABLE_END. Since the vendor entry in the CPU device ID struct is
compared against X86_VENDOR_INVALID which is 0, use X86_VENDOR_INVALID
instead of the 0 in the CPU_TABLE_END definition.
TEST=Timeless build for Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I0cae6d65b2265cf5ebf90fe1a9d885d0c489eb92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72888
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Found by linter
Change-Id: I7a49cce0b56cf83d0e4490733f9190284a314c4a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Now that there is a cpuid_match function, we can use it instead of doing
basically the same thing manually. In the functions is_fam17_1x and
is_fam17_2x both the stepping number and the lower nibble of the model
number are masked out. To avoid having magic constants in the code,
introduce the CPUID_ALL_STEPPINGS_AND_BASE_MODELS_MASK definition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I758f9564c08c62c747cc4f93a8d6b540a1834a62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72860
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the functionality of cpuid_match is also useful outside of
arch/x86/cpu.c and it's a relatively simple function, move its
definition as inline function to the header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic96746b33b01781543f60cf91904af35418e572d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72859
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce a macro to get the raw CPUID leaf 1 EAX value from a given set
of CPU family, model and stepping. The processor type in bits 12 and 13
is assumed to be always be zero; at least this is the case for all
CPUIDs that are currently in the coreboot tree. This can be used to
make the device values in the CPU device ID tables easier to read.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idab77453712b14983b1d02ca365f7924239fc2bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72856
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of always doing exact matches between the CPUID read in
identify_cpu and the device entries of the CPU device ID table,
offer the possibility to use a bit mask in the CPUID matching. This
allows covering all steppings of a CPU family/model with one entry and
avoids that case of a missing new stepping causing the CPUs not being
properly initialized.
Some of the CPU device ID tables can now be deduplicated using the
CPUID_ALL_STEPPINGS_MASK define, but that's outside of the scope of this
patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0540b514ca42591c0d3468307a82b5612585f614
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72847
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use a more specific type in preparation for using bit masks on this
field in the next patch. Since uint32_t is a typedef of unsigned int,
this won't change behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic54f73dcd3496a5ad85291b9b9586bc740b734d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72846
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>.
Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel SPR-SP processor has socket type as
PROCESSOR_UPGRADE_SOCKET_LGA4677 which is different
from the socket type of CPX-SP and SKX-SP.
Change-Id: Id2279cc0c1fa3f007d7c081af6f78e5aa98d2f3d
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71947
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that we support >1 Xeon-SP, XEON_SP_COMMON_BASE no longer
reflects the socket type. This uses SOC_INTEL_* Kconfig variables and
returns the correct socket type for Cooper Lake-SP.
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Change-Id: I142de5f040f3b76e352f27c00fe9e50787df5712
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I3b781c42ef6c23a5dcd31215c14fb9d7104822f2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I2a4b00d06c92eea1b83002c69d93037f84592393
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72111
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TCPA usually refers to log described by TPM 1.2 specification.
Change-Id: I896bd94f18b34d6c4b280f58b011d704df3d4022
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
A mainboard port needs to:
- select `CONFIG_MAINBOARD_HAS_EARLY_LIBGFXINIT'
- implement the Ada package `GMA.Mainboard' with a single function
`ports' that returns a list of ports to be probed for displays.
- set the desired `GFX_GMA_DEFAULT_MMIO' IO memory address to use
in romstage (and ramstage) for the graphic device.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libgfxinit compiles in romstage.
libgfxinit successfully executes in romstage and ramstage using
the requested MMIO setting on skolas.
Change-Id: I3c2101de10dc5df54fe873e43bbe0f1c4dccff44
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70276
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
values by macros
Macro definitions are from DMTF System Management BIOS (SMBIOS)
Reference Specification (DSP0134) Chapter 7.5.5.
Change-Id: Ifed1d773b0b349f878648b8172fd770a397e9686
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I3dfd7dd1de3bd27c35c195bd43c4a5b8c5a2dc53
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71522
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I38e4b8c6adfaaa45377b2fbe0644285d21841cd1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
APs use a lot less stack, so set up a separate stack for those in .bss.
Now that CPU_INFO_V2 is the only code path that is used, there is no
need to align stacks in c_start.S.
Change-Id: I7a681a2e3003da0400843daa5d6d6180d952abf5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
<types.h> provides <commonlib/bsd/cb_err.h>, <stdint.h> and <stddef.h>.
Change-Id: I966303336e604b1b945df77e5d4c3cccbf045c56
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
It's hidden behind the configuration option `CONFIG_ROMSTAGE_LIBHWBASE'.
This also adds some glue code to use the coreboot console for debug
output and our monotonic timer framework as timer backend.
Running Ada code in romstage and more particular libhwbase brings a few
challenges as global initialized variables are not supported in
Cache-As-Ram mode.
1. The libhwbase dynamic mmio driver implementation makes the Gnat
compiler generate some global initialized variables.
For this reason, when compiled for romstage or for romstage and
ramstage the static mmio driver is enforced (`HWBASE_STATIC_MMIO').
2. The Gnat compiler generates elaboration functions to initialize
program data at runtime. These elaboration functions are called by
the romstage_adainit() function.
The data references symbols suffixed by `_E'. Even though these
symbols, at compilation time, do not contain any data and are
filled with zeros, the Gnat compiler installs them in the .data
section.
Since these symbols are actually filled with zeros, it is safe to
install them in the .bss section.
cf. https://docs.adacore.com/gnat_ugn-docs/html/gnat_ugn/gnat_ugn/elaboration_order_handling_in_gnat.html#elaboration-code
This patch requires the libhwbase
https://review.coreboot.org/c/libhwbase/+/69854 CL.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libhwbae compiles for romstage and loads successfully
Change-Id: I670249d33506e886a683e55d1589cb2bf9b16aa3
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70275
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This boots on both qemu and real hardware now.
Change-Id: Ibd320059cff575847bbf1844b5bb100312f77916
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There is no need to pass the CPU index around.
Change-Id: Iad8e3cb318e6520ac5877118dbf43597dedb75b9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Some of these macros are too generic like "NONE" and create conflicts in
other compilation units.
Change-Id: I6131a576f115df20df4d3df712d4c3f59c6dceb7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70429
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Properly handle meminfo DIMMs with `dimm_size` of 0, which represent
empty slots. This allows platform code to create dummy meminfo DIMMs
so that SMBIOS tables have type 17 entries for empty DIMM slots.
Change-Id: I17ae83edf94483bd2eeef5524ff82721c196b8ba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64035
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TESTED: google/vilboz boots with clang build.
Change-Id: Ie115c27b4cb0b8f83d7647bdd27ffcbac9376399
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69746
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic64625bdaf8c4e9f8a5c1c22cece7f4070012da7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69903
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 095c931cf12924da9011b47aa64f4a6f11d89f13.
Previously cpu_info() was implemented with a struct on top of an
aligned stack. As FSP changed the stack value cpu_info() could not be
used in FSP context (which PPI is). Now cpu_info() uses GDT segments,
which FSP does not touch so it can be used.
This also exports cpu_infos from cpu.c as it's a convenient way to get
the struct device * for a certain index.
TESTED on aldrvp: FSP-S works and is able to run code on APs.
Change-Id: I3a40156ba275b572d7d1913d8c17c24b4c8f6d78
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69509
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I00551dfd963d47a58284bc31f21b0fa12130fe78
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69816
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Read FRU product info of PSU to get Type 39 required information.
Further development needed if multi-record info of PSU FRU is required.
For now, the read_fru_areas() only read product chassis and board info.
Signed-off-by: lichenchen.carl <lichenchen.carl@bytedance.com>
Signed-off-by: ziang <ziang.wang@intel.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I18d056cba1a79b0775c8a42b3a879e819887adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Clang isn't working so well with the ARM code yet. This is still
breaking builders after fixing the compiler warnings.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2653edae0b89f75ef7d06a1be523585ff66a3b89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69701
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Use VBOOT_STARTS_BEFORE_BOOTBLOCK to determine whether the VERSTAGE
needs to be build as x86 stage.
Change-Id: I126801a1f6f523435935bb300f3e2807db347f63
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Creating MP table is not useful when it does not include
the interrupt routing entries.
Change-Id: I1f38fb32a9436de64dfaf82e426cbd64b220ffa7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69489
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This disables MP table generation for the affected boards
since interrupt routing entries would now be completely missing.
The mechanism itself is flawed and redundant. The mapping
of integrated PCI devices' INTx pins to IOAPIC pins is
dependent of configuration registers and needs not appear
in the devicetree.cb files at all.
The write_smp_table implementation would skip writing
any entry delivering to destination IOAPIC ID 0. This
does not follow MP table specification.
There were duplicate calls to register_new_ioapic_gsi0(),
with another present under southbridge LPC device.
Change-Id: I383d55ba2bc0800423617215e0bfdfad5136e9ac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69488
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The 64bit handles 64bit input variables properly.
TESTED: Both qemu and real hardware can use LZ4 properly which use this
code.
Change-Id: Ib43ec19df97194d6b1c18bfacb5fe8211ba0ffe5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Doing this in C code is way easier to understand. Also the thread local
storage is now in .bss instead of the AP stack. This makes it more
robust against stack overflows, as APs stacks overflow in each other.
TESTED: work on qemu.
Change-Id: I19d3285daf97798a2d28408b5601ad991e29e718
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69435
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6ff18e5ede0feda65f81c064394febd3eebc5247
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55316
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Using this I/O APIC IDs will be assigned incrementally
in the order of calling. I/O APIC ID #0 is reserved for
the I/O APIC delivering GSI #0.
Change-Id: I6493dc3b4fa542e81f80bb0355eac6dad30b93ec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This reverts commit eb76a455cd39ec59b7f2ba28baeec9538befd59e
and applies minor fixes to make it build again.
PARALLEL_MP was working prior to board removal and no
relevant SMI handlers were implemented. So NO_SMM choice
is now selected.
Change-Id: Ia1cd02278240d1b5d006fb2a7730d3d86390f85b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The 0x9a, 0x9b, and 0x9c postcodes are not used anywhere else in the
coreboot tree other than in arch/x86/tables.c. Add macros to
standardize these postcodes.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I16be65ffa3f0b253fe4a9bb7bfb97597a760ad3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Now that all platforms use parallel_mp this is the only codepath used
for cpu_info() local thread storage.
Change-Id: I119214e703aea8a4fe93f83b784159cf86d859d3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69122
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that all agesa CPUs are removed this code is unused.
Change-Id: If0c082bbdb09457e3876962fa75725add11cb67c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69118
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This board use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: Idf37ade31ddb55697df1a65062c092a0a485e175
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69114
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This pragma says to IWYU (Include What You Use) that the current file
is supposed to provide commented headers.
Change-Id: I482c645f6b5f955e532ad94def1b2f74f15ca908
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Id2db229dec2ed44333faaa8c53f3a2f9d66d52e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Enable SSE2 (and SSE) when compiling for x86_64. Compilers often assume
SSE2 is present and enabled when targeting x86_64.
This fixes:
- lzma decompression code is compiled with the -Ofast flag
- 'everything' when compiling with clang.
This mostly affects qemu targets, which did not have this flag selected
yet.
TESTED on qemu.
Change-Id: I3cdc584c97016e15513df663a54a7bdb549a73e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44869
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
the "x86 PIC code ebx" workaround done previously
by commit 689e31d18b0f ("Make cpuid functions usable
when compiled with PIC") does not work for x86_64
(the upper dword of rbx is set to 0)
the GCC bug that needed the workaround was fixed
in version 5 (see GCC bug 54232)
Change-Id: Iff1dd72c7423a3b385a000457bcd065cf7ed6b95
Signed-off-by: Matei Dibu <matdibu@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66345
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
To allow testing of code that uses CPUID calls, separate the actual
calls into a separate header file, This allows the tests to emulate
the cpuid access without replacing the rest of the cpu.h definitions.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic5ee29f1fbb6304738f2eb7999cbcfdf8f7d4932
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Some platform run early stages like romstage and verstage from CAR
instead of XIP. This allows to link them like other arch inside the
_program region. This make in place LZ4 decompression possible as it
needs a bit of extra place to extract the code which is now provided by
the .bss.
Tested on up/squared (Intel APL).
Change-Id: I6cf51f943dde5f642d75ba4c5d3be520dc56370a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The current SMBIOS for coreboot is missing processor info for Alder Lake and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements upgrade function.
Refer to SMBIOS spec sheet for documentation on cpu socket values:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS processor upgrade value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I5796d31fa2d31b17afa5eddde0799b0f68d69909
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68024
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Based on DMTF SMBIOS Specification 3.5.0
Signed-off-by: Erik van den Bogaert <ebogaert@eltan.com>
Change-Id: I710124ca88dac9edb68aab98cf5950aa16c695d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67926
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
use functions to check for pci devices instead of open-coded
solution.
TEST: compiled and qemu run successfully
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: Idb992904112db611119b2d33c8b1dd912b2c8539
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68102
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I6870fb9f3d41ef5dc6599e979ce0c890a1e145ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I85e60c189c1ec1da5cf0e5b864447ef6f7b3f548
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Based on DMTF SMBIOS Specification 3.1.0.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia2db29f8bc4cfbc6648bb2cabad074d9ea583ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
use is_enabled_cpu() on cycles over device list to check
whether the current device is enabled cpu.
TEST: compile test and qemu run successfully with coreinfo
payload
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: If64bd18f006b6f5fecef4f606c1df7d3a4d42883
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67797
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix the warning below when building GA-945GCM-S2L with 64-bit:
src/arch/x86/idt.S:216: Warning: no instruction mnemonic suffix given and no register operands; using default for `iret'
Change-Id: Ibbc106714e25293951a71d84fea0a660f41f9c02
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The header file `rules.h` is automatically included in the build by the
top level makefile using the command:
`-include src/soc/intel/common/block/scs/early_mmc.c`.
Similar to `config.h` and 'kconfig.h`, this file does not need to be
included manually, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I23a1876b4b671d8565cf9b391d3babf800c074db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67348
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clear the SMBIOS region before writing SMBIOS tables.
On librem_mini and librem_mini_v2, CBMEM allocations are offset by 4K
for reboots relative to the cold boot. This means the unused SMBIOS
region could contain the first 4K of the ACPI tables from the last boot
(including the signature), which prevents Linux from booting.
The CBMEM 4K offset appears to be due to FSP allocating memory
differently between cold boot and reboot, this appears to be normal and
causes the CBMEM base address to change.
It is not clear why Linux examines an ACPI signature found in this
region, but boot logs over serial confirm that it sees the corrupt
table. The table is supposed to be found just below 1M, and kernel
source appears to look in this region, but it is definitely finding the
corrupt table in CBMEM.
Normal cold boot:
[ 0.008615] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4)
[ 0.008619] ACPI: XSDT 0x0000000099B480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008624] ACPI: FACP 0x0000000099B4A2A0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008634] ACPI: DSDT 0x0000000099B48280 00201F (v02 COREv4 COREBOOT 20110725 INTL 20220331)
...
Reboot with corrupt table:
[ 0.008820] ACPI: RSDP 0x00000000000F6190 000024 (v02 COREv4)
[ 0.008823] ACPI: XSDT 0x0000000099B480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[ 0.008828] ACPI: ???G 0x0000000099B4A2A0 20002001 (v00 ?G?$ 47020100 ?, 47020100)
[ 0.008831] ACPI: �y 0x0000000099B4A3C0 54523882 (v67 ?_HID? A�? 65520D4E al T 20656D69)
...
There are no specific errors but it returns to the firmware soon after,
presumably due to a fault. This appears to be so early in the boot
that panic=0 on the kernel command line has no effect.
Test: build/boot Librem Mini, Librem Mini v2 and reboot.
Change-Id: Ia20d0b30160e89e8d96add34d7e0e881f070ec61
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66377
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
fix the following checkpatch errors:
WARNING:BRACES: braces {} are not necessary for any arm of this statement
354: FILE: src/arch/x86/smbios.c:354:
+ if (CONFIG_ROM_SIZE >= 1 * GiB) {
[...]
+ } else {
[...]
WARNING:BRACES: braces {} are not necessary for single statement blocks
561: FILE: src/arch/x86/smbios.c:561:
+ if (leaf_b_threads == 0) {
+ leaf_b_threads = 1;
+ }
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I14c29e4358cad4cd5ef169ebab7079db2129d8fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Change-Id: I30bbd0288475fbefec55ce294e7963df1de6aa6a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Change-Id: I21b954ce62259bb77d88775c3086cfac17dd90c7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: If0e9fcea680d487c28a965e944b3333bb5a07026
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60696
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: Ief1d069ae0fb19a2179f08c2e9cf416367661e69
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60674
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Add (a, b, c)` with `c = a + b`.
Change-Id: If848d391e5ec33ebfb08515414739dbdd5011e08
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This makes inspection of linker scripts in the build dir a little
easier.
Change-Id: I509faa4cee2c9f066f4e20f6038349e1165a619a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I187c2482dd82c6c6d1fe1cbda71710ae1a2f54ad
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This moves the die() statement to a common place.
Change-Id: I24c9f00bfee169b4ca57b469c089188ec62ddada
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I493d686fb122fb47f0b4dcf34e3635518770f97f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: Iaa99d9dc4cf12a7431be1610d339cf78116f8bea
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
It might be possible to have this used for more than x86, but that
will be for a later commit.
Change-Id: I4968364a95b5c69c21d3915d302d23e6f1ca182f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Replace `LGreater(a, b)` with `a > b`.
Change-Id: I0cabf4f69191fe345fd72619847db384db2e0e87
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
FSP needs interrupts disable so also disable generating exceptions
around debug registers.
Change-Id: Ia49dde68d45b71e231aaf32a0e6fd847f0e06146
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64426
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While on it, reformat code and remove unused macro.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I63e413820cb3f4dfa21d1692301348ecdb3190b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Currently, the log message contains an unwanted trailing space, so
remove it.
[ERROR] Null dereference at eip: 0x3ffad01a
Change-Id: I64509ca4bad94c7db4279cc4c1e6fee2bba2e035
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This adds 2 flags:
* invisible opt-in flag for platforms on which clang seems to work
* visible opt-in flag to allow experimenting
Clang seems to work rather well on x86_32 so it makes sense to start
adding that to Jenkins buildtesting, which this allows.
This allows abuild to differentiate between targets that are known to
build with clang. This makes buildtesting just those targets easier.
Change-Id: I46f1bad59bda94f60f4a141237ede11f6eb93cc2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Systems have a lot more cores now and 4KiB is not cutting it. E.g.
for a system with 255 cores more than 16KiB is needed.
We could also make this a Kconfig parameter but it's probably not
worth having such micro optimizations to save a few KiB.
Change-Id: Idd47e55d8d679cc70eae996ee1af3ad7eaa1d0cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I079c99006fea95ba3dc2fb02c95a3747af55e218
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that all AGESA codebases have been fixed to not use the .data
section, the warning workaround can be disabled.
Change-Id: I675d169a5d2f16e1e9ae05f95e045e9ef3d12208
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
With CBFS verification, cbfstool (CB:41121) needs bootblock to be
present in coreboot.pre in order to locate the metadata hash stored in
it. Therefore we have to ensure that bootblock is added to CBFS before
other CBFS files are added.
To solve the problem, create the 'add_bootblock' function, and call it
in the coreboot.pre recipe. Because bootblock.bin is now a prerequisite
of coreboot.pre, it will get built even if CONFIG_BOOTBLOCK_IN_CBFS=n.
BUG=b:233263447
TEST=emerge-guybrush coreboot
TEST=emerge-corsola coreboot chromeos-bootimage
TEST=cbfstool image-kingler.bin print -v
TEST=Kingler booted successfully
BRANCH=none
Change-Id: I385deb8231e44310ee139c3f69f449e75b92b2be
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
All targets now use cbmem for the BERT region, so the implementation can
be common.
This also drops the obsolete comment about the need to have bert in a
reserved region (cbmem gets fixed to be in a reserved region).
Change-Id: I6f33d9e05a02492a1c91fb7af94aadaa9acd2931
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
AGESA has a lot of code in the .data section (initialized data). However
there is no such section in CAR stages as the code runs in XIP mode and
CAR is too small to contain the data section. When the linker can not
match code to a section it will just append it, which is why AGESA
worked at all.
Follow-up patches will attempt to fix AGESA and set Kconfig parameter to
'n'. After all AGESA sources have been fixed, this can be removed.
Change-Id: I311ee17e3c0bd283692194fcee63af4449583d74
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Now that the bootblock isn't added to cbfs anymore, on some targets it's
only conditionally build. One example would be Intel APL where it only
gets build when stitched into an IFWI. This is always done when
compiling for real targets but not by the CI builder. This adds a dummy
target to make sure the bootblock always gets buildtested.
Change-Id: I60601e01a2c370b5c21493b71d51f495bb42f41d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
device.c should not hold arch specific code.
Change-Id: I9dfdb905a83916c0e9d298e1c38da89f6bc5e038
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The MP_IRQ flags can be used in the MP table and the ACPI MADT table.
Move them into acpi.h to avoid pulling in the full mpspec.h which is
only available on x86.
BUG=b:218874489, b:160595155
TEST=Build
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4f1091b7629a6446fa399720b0270556a926401a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63845
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
