summaryrefslogtreecommitdiff
path: root/src/arch/x86
AgeCommit message (Collapse)Author
2016-05-02x86/memlayout.h: Do not include data/bss sections in C_ENVIRONMENT_BOOTBLOCKFurquan Shaikh
C_ENVIRONMENT_BOOTBLOCK on x86 is like romstage and uses cache-as-ram separately. It does not use any data/bss sections. Change-Id: I8957f467f01e754fa2d95783466a01daa6c4e51a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-04-21lib: add common write_tables() implementationAaron Durbin
In order to de-duplicate common patterns implement one write_tables() function. The new write_tables() replaces all the architecture-specific ones that were largely copied. The callbacks are put in place to handle any per-architecture requirements. Change-Id: Id3d7abdce5b30f5557ccfe1dacff3c58c59f5e2b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14436 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/coreboot_table: add architecture hooks for adding tablesAaron Durbin
Add a architecture specific function, arch_write_tables(), that allows an architecture to add its required tables for booting. This callback helps write_tables() to be de-duplicated. Change-Id: I805c2f166b1e75942ad28b6e7e1982d64d2d5498 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14435 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/bootmem: allow architecture specific bootmem rangesAaron Durbin
A architecture-specific function, named bootmem_arch_add_ranges(), is added so that each architecture can add entries into the bootmem memory map. This allows for a common write_tables() implementation to avoid code duplication. Change-Id: I834c82eae212869cad8bb02c7abcd9254d120735 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14434 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/x86: remove low coreboot table supportAaron Durbin
In addition to being consistent with all other architectures, all chipsets support cbmem so the low coreboot table path is stale and never taken. Also it's important to note the memory written in to that low area of memory wasn't automatically reserved unless that path was taken. To that end remove low coreboot table support for x86. Change-Id: Ib96338cf3024e3aa34931c53a7318f40185be34c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14432 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch/x86: clean up write_tables()Aaron Durbin
There were quite a number of #if/#endif guards in the write_tables() code. Clean up that function by splitting up the subcomponents into their own individual functions. The same ordering and logic is kept maintained. The changes also benefit the goal of using a common core write_tables() logic so that other architectures don't duplicate large swaths of code. Change-Id: I93f6775d698500f25f72793cbe3fd4eb9d01a20c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14431 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch: only print cbmem entries in one placeAaron Durbin
Each arch was calling cbmem_list() in their own write_tables() function. Consolidate that call and place it in common code in write_coreboot_table(). Change-Id: If0d4c84e0f8634e5cef6996b2be4a86cc83c95a9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14430 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21arch: use Kconfig variable for coreboot table sizeAaron Durbin
Instead of hard coding a #define in each architecture's tables.c for the coreboot table size in cbmem use a Kconfig varible. This aids in aligning on a common write_tables() implementation instead of duplicating the code for each architecture. Change-Id: I09c0f56133606ea62e9a9c4c6b9828bc24dcc668 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14429 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-15bootblock_crt0: Use CR* macros from cpu/x86/cr.hFurquan Shaikh
Instead of re-defining the macros, include cpu/x86/cr.h in bootblock_crt0.S to re-use already defined macros for accessing CR* flags. Change-Id: Idade02f7a6bc880c9aad3bfacd05ac57b6d04e44 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14359 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02lib/prog_loading: introduce prog_segment_loaded()Aaron Durbin
In order to not muddle arch vs chipset implementations provide a generic prog_segment_loaded() which calls platform_segment_loaded() and arch_segment_loaded() in that order. This allows the arch variants to live in src/arch while the chipset/platform code can implement their own. Change-Id: I17b6497219ec904d92bd286f18c9ec96b2b7af25 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14214 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-04-02arch/x86: notify the system when the postcar parameter was updatedAaron Durbin
While rmodule_load() calls arch_segment_loaded() when it's done loading any pieces of code which further modify it, like changing parameters within the program itself, need to notify the rest of the system. Change-Id: Ia3374b58488120ba6279592a77d7f9c6217f1215 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14213 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-23arch/x86: introduce postcar stage/phaseAaron Durbin
Certain chipsets don't have a memory-mapped boot media so their code execution for stages prior to DRAM initialization is backed by SRAM or cache-as-ram. The postcar stage/phase handles the cache-as-ram situation where in order to tear down cache-as-ram one needs to be executing out of a backing store that isn't transient. By current definition, cache-as-ram is volatile and tearing it down leads to its contents disappearing. Therefore provide a shim layer, postcar, that's loaded into memory and executed which does 2 things: 1. Tears down cache-as-ram with a chipset helper function. 2. Loads and runs ramstage. Because those 2 things are executed out of ram there's no issue of the code's backing store while executing the code that tears down cache-as-ram. The current implementation makes no assumption regarding cacheability of the DRAM itself. If the chipset code wishes to cache DRAM for loading of the postcar stage/phase then it's also up to the chipset to handle any coherency issues pertaining to cache-as-ram destruction. Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-21arch/x86: honor CONFIG_X86_TOP4G_BOOTMEDIA_MAP for verstageAaron Durbin
When CONFIG_X86_TOP4G_BOOTMEDIA_MAP was introduced verstage was not updated. Correct this oversight. Change-Id: I2775c08798906ba0ba55a361407d7d2b52313229 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14142 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-03-18src/arch/x86/acpi.c: Use correct host address width in DMAR ACPI tableJacob Laska
The previous implementation assumed the CPU physical address size to be 40 which is not true of all platforms. Use an existing function to obtain the correct CPU physical address to report in the DMAR ACPI table. Change-Id: Ia79e9dadecc3f5f6a86ce3789b213222bef482b3 Signed-off-by: Jacob Laska <jlaska91@gmail.com> Reviewed-on: https://review.coreboot.org/14102 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-03-15x86: Drop CONFIG_COMPILE_IN_DSDTStefan Reinauer
This option is no longer needed, as FMAP support has been fully integrated in coreboot Change-Id: I6121b31bf946532717ba15e12f5c63d2baa95ab2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-11arch/x86/smbios: fix length calculation for SMBIOS type 17Iru Cai
Different DIMM modules give different SMBIOS type 17 lengths, so we can't use `meminfo->dimm_cnt*len' for entry struct size, otherwise it'll give a wrong SMBIOS size when two or more different DIMMs are installed on the machine. Change-Id: I0e33853f6aa4b30da547eb433839a397d451a8cf Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14008 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-05arch/x86: Add common assembly code for stages that run in CARAndrey Petrov
This adds a few assembly lines that are generic enough to be shared between romstage and verstage that are ran in CAR. The GDT reload is bypassed and the stack is reloaded with the CAR stack defined in car.ld. The entry point for all those stages is car_stage_entry(). Change-Id: Ie7ef6a02f62627f29a109126d08c68176075bd67 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13861 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-05arch/x86: document CAR symbols and expose them in symbols.hAndrey Petrov
Attempt to better document the symbol usage in car.ld for cache-as-ram usage. Additionally, add _car_region_[start|end] that completely covers the entire cache-as-ram region. The _car_data_[start|end] symbols were renamed to _car_relocatable_data_[start|end] in the hopes of making it clearer that objects within there move. Lastly, all these symbols were added to arch/symbols.h. Change-Id: I1f1af4983804dc8521d0427f43381bde6d23a060 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13804 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-05Kconfig: hide useless options on ARM.Vladimir Serbinenko
Those options have no effect or lead to compile error on ARM due to fundamental incompatibilities. Add proper "depends on" clauses to hide them. Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13904 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-04arch/x86: always use _start as entry symbol for all stagesAaron Durbin
Instead of keeping track of all the combinations of entry points depending on the stage and other options just use _start. That way, there's no need to update the arch/header.ld for complicated cases as _start is always the entry point for a stage. Change-Id: I7795a5ee1caba92ab533bdb8c3ad80294901a48b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13882 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-04arch/x86: rename reset_vector -> _startAaron Durbin
In order to align the entry points for the various stages on x86 to _start one needs to rename the reset_vector symbol. The section is the same; it's just a symbol change. Change-Id: I0e6bbf1da04a6e248781a9c222a146725c34268a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13881 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-03arch/x86: Allow soc/chipset to set linking addressAndrey Petrov
Until recently x86 romstage used to be linked at some default address. The address itself is not meaningful because the code was normally relocated at address calculated during insertion in CBFS. Since some newer SoC run romstage at CAR it became useful to link romstage code at some address in CAR and avoid relocation during build/run time altogether. Change-Id: I11bec142ab204633da0000a63792de7057e2eeaf Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13860 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-02src/arch/x86/smbios: Add vendorsPatrick Rudolph
Add more manufacturer IDs for vendor: * GSkill * OCZ * Transcend Change-Id: Ic7df76b1310b2c1abea9c5d2d8fd688cb2a713b8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13863 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-25x86/Makefile.inc: Fix redundant addition of memlayout.ld in bootblockFurquan Shaikh
For C_ENVIRONMENT_BOOTBLOCK, memlayout.ld is added by call to early_x86_stage. Remove redundant addition of memlayout.ld in this case. Change-Id: Ibb5ce690ac4e63f7ff5063d5bd04daeeb731e4d7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/13777 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-22die() when attempting to use bounce buffer on non-i386.Vladimir Serbinenko
Only i386 has code to support bounce buffer. For others coreboot would silently discard part of binary which doesn't work and is a hell to debug. Instead just die. Change-Id: I37ae24ea5d13aae95f9856a896700a0408747233 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13750 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-19x86: add coreboot table entry for TSC infoAaron Durbin
The 8254 (Programmable Interrupt Timer) is becoming optional on x86 platforms -- either from saving power or not including it at all. To allow a payload to still use a TSC without doing calibration provide the TSC frequency information in the coreboot tables. That data is provided by code/logic already employed by platform. If tsc_freq_mhz() returns 0 or CONFIG_TSC_CONSTANT_RATE is not selected the coreboot table record isn't created. BUG=chrome-os-partner:50214 BRANCH=glados TEST=With all subsequent patches confirmed TSC is picked up in libpayload. Change-Id: Iaeadb85c2648587debcf55f4fa5351d0c287e971 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13670 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-19lib/coreboot_table: add function to allow arch code to add recordsAaron Durbin
Add lb_arch_add_records() to allow the architecture code to generically hook into the coreboot table generation. BUG=chrome-os-partner:50214 BRANCH=glados TEST=With all subsequent patches confirmed lb_arch_add_records() is called when a strong symbol is provided. Change-Id: I7c69c0ff0801392bbcf5aef586a48388b624afd4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13669 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-17arch/x86: Add option to disable default mmap_boot implementationAlexandru Gagniuc
On certain platforms, the boot media is either not memory-mapped, or not mapped at the top of 4G. This makes the default mmap_boot implementation unsuitable. Add an option to allow such platforms to define their own mapping implementation. Change-Id: I8293126fd9cc1fd3d75072f7811e659765348e4a Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13x86: make bootblock size for C_ENVIRONMENT_BOOTBLOCK configurableAaron Durbin
Certain platforms may need to limit their bootblock size to within a given size because specific constraints. Allow the size to be provided by the mainboard or chipset by way of the arch Kconfig being processed after those. Change-Id: I46cc6315918cde575070fa2d3e2514f28008f575 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13691 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-12timestamp: Remove HAS_PRECBMEM_TIMESTAMP_REGION KconfigJulius Werner
This patch generalizes the approach previously used for ARM32 TTB_SUBTABLES to "auto-detect" whether a certain region was defined in memlayout.ld. This allows us to get rid of the explicit Kconfig for the TIMESTAMP region, reducing configuration redundancy and avoiding confusion when setting up future boards. (Removing armv4/bootblock_simple.c because it references this Kconfig and it is a dead file that I just forgot to remove in CL:12076.) BRANCH=None BUG=None TEST=Booted Oak and confirmed that all pre-RAM timestamps are still there. Built Nyan and Falco. Change-Id: I557a4b263018511d17baa4177963130a97ea310a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13652 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11arch: remove stage_exit()Aaron Durbin
It's no longer used. Remove it. Change-Id: Id6f4084ab9d671e94f0eee76bf36fad9a174ef14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13678 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11arch/x86: Change how BOOTBLOCK_CUSTOM is selected by defaultAndrey Petrov
Currently x86s select BOOTBLOCK_CUSTOM by default. With this change BOOTBLOCK_CUSTOM is selected only if C bootblock isn't. Change-Id: I218f3b4044175b89697790c82c384b0f85a27ade Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13642 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11arch/x86: Allow bootblock code to use CAR_GLOBAL variablesAndrey Petrov
Since cbmem is not initialized in bootblock, CAR_GLOBAL variables can only be accessed directly similar to verstage. Change-Id: Ifc705016290807c49dc8c49b581864cac2ad3f80 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11arch/x86: Reserve space for stack in CAR layoutAndrey Petrov
Some platforms may want to use C code in bootblock so they need writable memory and CAR can be used for it. This change reserves memory in CAR that can be used by bootblock and other CAR stages. Change-Id: I8dec768cf8763dbe235f0ba1339079ebc49cbd9a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13640 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-03xcompile: Add a way to specify -march=i586Martin Roth
Instead of instructing users to edit xcompile when they want to build a quark platform, give the build a way to set -march=586 so that the quark code will build correctly. The Quark processor does not support the instructions introduced with the Pentium 6 architecture. Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13552 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-02arch/x86: Add second paragraph to license headerMartin Roth
Change-Id: Ic1da46d2abc8d20987048e4ef1e7a776d0c685d6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13555 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-01-30arch/x86: Implement minimal bootblock for C_ENVIRONMENT_BOTOBLOCKAlexandru Gagniuc
Some newer x86 systems can boot from non-memory-mapped boot media (e.g. EMMC). The bootblock may be backed by small amounts of SRAM, or other memory, similar to how most ARM chipsets work. In such cases, we may not have enough code space for romstage very early on. This means that CAR setup and early boot media (e.g. SPI, EMMC) drivers need to be implemented within the limited amount memory of storage available. Since the reset vector has to be contained in this early code memory, the bootblock is the best place to implement loading of other stages. Implement a bootblock which does the minimal initialization, up to, and including switch to protected mode. This then transfers control to platform-specific code. No stack is needed, and control is transferred via a "jmp" such that no stack operations are involved. Change-Id: I009b42b9a707cf11a74493bd4d8c189dc09b8ace Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/13485 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-30arch/x86: Rename bootblock.S to bootblock_romcc.SAlexandru Gagniuc
bootblock.S was used strictly for setting up the system so that the assembly generated by ROMCC could be executed. Since the infrastructure now exists to run a bootblock wihtout ROMCC, rename this file accordingly. this is done to prevent any future confusion. Change-Id: Icbf5804b66b9517f9ceb352bed86978dcf92228f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/11784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-28Move object files to $(obj)/<class>/Nico Huber
Instead of tagging object files with .<class>, move them to a <class> directory below $(obj)/. This way we can keep a 1:1 mapping between source- and object-file names. The 1:1 mapping is a prerequisite for Ada, where the compiler refuses any other object-file name. Tested by verifying that the resulting coreboot.rom files didn't change for all of Jenkins' abuild configurations. Change-Id: Idb7a8abec4ea0a37021d9fc24cc8583c4d3bf67c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13181 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-01-28Makefile: Make full use of src-to-obj macroNico Huber
There were several spots in the tree where the path to a per class object file was hardcoded. To make use of the src-to-obj macro for this, it had to be moved before the inclusion of subdirs. Which is fine, as it doesn't have dependencies beside $(obj). Tested by verifying that the resulting coreboot.rom files didn't change for all of Jenkins' abuild configurations. Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13180 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-26arch/x86: Drop arch/pciconf.hStefan Reinauer
It's unused, so get rid of it. Change-Id: I28c6dc0208686edc3aabaf624773ea70350c1c8f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13177 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-26src/arch: Update license headers missing paragraph 2Martin Roth
For the coreboot license header, we want to use two paragraphs. See the section 'Common License Header' in the coreboot wiki for more details. Change-Id: I4a43f3573364a17b5d7f63b1f83b8ae424981b18 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13118 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-26arch/x86: move SetCodeSelector to .text segmentPatrick Georgi
It ended up in .data, and that doesn't seem to be actually necessary. Change-Id: Ib17d6f9870379d1b7ad7bbd3f16a0839b28f72c8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13134 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-23arch/x86: link bootblock like other stages for C_ENVIRONMENT_BOOTBLOCKAaron Durbin
When C_ENVIRONMENT_BOOTBLOCK is selected link bootblock using the memlayout.ld scripts and infrastructure. This allows bootblock on x86 to utilize all the other coreboot infrastructure without relying romcc. Change-Id: Ie3e077d553360853bf33f30cf8a347ba1df1e389 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13069 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-23arch/x86: remove .intel_syntaxPatrick Georgi
Replace with the more familiar AT&T syntax. Tested by sha1sum(1)ing the object files, and checking the objdump that the code in question was actually compiled. Change-Id: Ie85b8ee5dad1794864c18683427e32f055745221 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13132 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-21arch/x86: Add files needed for C environment bootblock on x86Alexandru Gagniuc
This provides symbols needed by CBFS and FMAP APIs, and allows running run_romstage() in an x86 bootblock. Note that console-related files are not added in this patch, as they are not essential for the functinality on an x86 environment bootbock. Change-Id: I36558b672a926ab22bc9018cd51aee32213792c2 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/12880 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-21arch/x86/include: Rename bootblock_common to bootblock_romcc.hAlexandru Gagniuc
This header is only used for the bootblock compiled with ROMCC. As the follow-on patches introduce a bootblock which does not make use of ROMCC, rename this header to prevent confusion. Change-Id: Id29c5bc6928c11cc7cb922fcfac71e5a3dcd113c Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/12867 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-19arch/x86/Makefile.inc: Add a comment to fix syntax highlightingMartin Roth
Trivial fix for syntax highlighting in editors. Some get confused by the double quote that doesn't have a close quote and stop highlighting at that point. This comment closes the quote and the paren pair so that they can recover. Change-Id: I2bdb7c953a86905fc302d77eb9ad1200958800b7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13017 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-19arch/x86: Indent using tabs not spacesMartin Roth
No functional changes - just whitespace fixes. Signed-off-by: Martin Roth <martinroth@google.com> Change-Id: I8ffa87240bcbd3d657ed9dc619b5e5bf9de734d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12853 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-18arch/x86/Makefile.inc: Update symbol check macroMartin Roth
This was breaking the build on OS X, but also wasn't working correctly under linux anymore either. It wouldn't print the illegal symbols when it failed. - Split the generation of the offenders file from the actual check for offending symbols and just send all output to /dev/null. - Rewrite the check for offending symbols in a way that works with OS X. Tested by adding a global variable to romstage and verifying the failure is shown correctly. Verified that it works correctly with no illegal variables. Change-Id: I5b3ac32448851884d78c3b3449508ffe014119ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13018 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-14arch/x86: add missing license headersMartin Roth
These were mostly written as part of the coreboot project, so get the standard coreboot license header. memmove.c came from the linux kernel, so also gets the standard coreboot v2 license header, but gets the added attribution that it was derived from the linux kernel. Unlike many coreboot files, this file may not be re-licensed as GPL V3. Change-Id: I1fdc26b543e059f7a42d4b886f7222f4c74b959d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12916 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-14arch/x86/include: add missing license headersMartin Roth
These were all written as part of the coreboot project, so get the standard coreboot license header. Change-Id: I51e1e504b3bc7be2a00c9356d8775b87f2a1db5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12912 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07cpu/amd/microcode: Introduce CBFS access spinlock to avoid IOMMU failureTimothy Pearson
When microcode updates are enabled, this fixes an issue identical to that described in GIT hash 7b22d84d: * drivers/pc80: Add optional spinlock for nvram CBFS access Change-Id: Ib7e8cb171f44833167053ca98a85cca23021dfba Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12063 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-06Revert "x86: Align CBFS on top of ROM"Aaron Durbin
This reverts commit 65e33c08a9a88c52baaadaf515b9591856115a77. This was the wrong logic to fix the master header. Change-Id: I4688034831f09ac69abfd0660c76112deabd62ec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12824 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-29x86: Align CBFS on top of ROMNico Huber
Since the introduction of the new (interim?) master header, coreboot searches the whole ROM for CBFS entries. Fix that by aligning it on top of the ROM. Change-Id: I080cd4b746169a36462a49baff5e114b1f6f224a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/12810 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-18drivers/pc80: Add optional spinlock for nvram CBFS accessTimothy Pearson
When enabling the IOMMU on certain systems dmesg is spammed with I/O page faults like the following: AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.0 domain=0x000a address=0x000000fdf9103300 flags=0x0030] Decoding the faulting address: 0x000000fdf9103300 fdf91x Hypertransport system management region 33 SysMgtCmd (System Management Command) = 0x33 3 Base Command Type = 0x3: STPCLK (Stop Clock request) 3 SMAF (System Management Action Field) = [3:1] = 0x1 1 Signal State Bit Map = [0] = 0x1 Therefore, the error appears to be triggered by an upstream C1E request. This was eventually traced to concurrent access to the SP5100's SPI Flash controller by multiple APs during startup. Calls to the nvram read functions get_option and read_option call CBFS functions, which in turn make near-simultaneous requests to the SPI Flash controller, thus placing the SP5100 in an invalid state. This limitation is not documented in any public AMD errata, and was only discovered through considerable debugging effort. Change-Id: I4e61b1ab767b1b7958ac7c1cf20eee41d2261bef Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12061 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-16x86/smbios: Return index 0 for empty stringsBen Gardner
Section 6.1.3 (Text Strings) of the SMBIOS specification states: If a string field references no string, a null (0) is placed in that string field. Change smbios_add_string() to do that. Change-Id: I9c28cb89dcfe2c8ef2366c23ee6203e15b7c2513 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12697 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-16build system/x86: depend on directories before touch /empty targetsAlexander Couzens
$(objgenerated)/empty would touch files before the directory is created on parallel builds. Thanks to reproducible-builds.org for hitting this bug. Change-Id: I7565e9fe130b4e9deaf1c7b9d568ff90b00dda52 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/12717 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-15src/console: Add x86 romstage spinlock option and printk spinlock supportTimothy Pearson
This paves the way for AP printk spinlock on AMD platforms Change-Id: Ice42a0d3177736bf6e1bc601092e413601866f20 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/11958 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-10lib: remove assets infrastructureAaron Durbin
Now that only CBFS access is supported for finding resources within the boot media the assets infrastructure can be removed. Remove it. BUG=chromium:445938 BRANCH=None TEST=Built and ran on glados. Change-Id: I383fd6579280cf9cfe5a18c2851baf74cad004e9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12690 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-10cbfs/vboot: remove firmware component supportAaron Durbin
The Chrome OS verified boot path supported multiple CBFS instances in the boot media as well as stand-alone assets sitting in each vboot RW slot. Remove the support for the stand-alone assets and always use CBFS accesses as the way to retrieve data. This is implemented by adding a cbfs_locator object which is queried for locating the current CBFS. Additionally, it is also signalled prior to when a program is about to be loaded by coreboot for the subsequent stage/payload. This provides the same opportunity as previous for vboot to hook in and perform its logic. BUG=chromium:445938 BRANCH=None TEST=Built and ran on glados. CQ-DEPEND=CL:307121,CL:31691,CL:31690 Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12689 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06Remove #ifdef checks on Kconfig symbolsMartin Roth
In coreboot, bool, hex, and int type symbols are ALWAYS defined. Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12560 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-04arch/x86/bootblock_normal: Update to use fewer registersMartin Roth
- Move initialization of entry to later in main. - Make boot_mode an unsigned char - no need to use int. - Remove unnecessary variable filenames. - Only get and try to boot fallback once. Change-Id: I823092c60dd8c2de0a36ec7fdbba3e68f6b7567a Test: compiled. Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12574 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-02build system: Add more files through cbfs-files instead of manual rulesPatrick Georgi
verstage, romstage, and payload can be added through infrastructure now. Change-Id: Ib9e612ae35fb8c0230175f5b8bca1b129f366f4b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12549 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-02x86/smm: Initialize SMM on some CPUs one-by-oneDamien Zammit
We currently race in SMM init on Atom 230 (and potentially other CPUs). At least on the 230, this leads to a hang on RSM, likely because both hyperthreads mess around with SMBASE and other SMM state variables in parallel without coordination. The same behaviour occurs with Atom D5xx. Change it so first APs are spun up and sent to sleep, then BSP initializes SMM, then every CPU, one after another. Only do this when SERIALIZE_SMM_INITIALIZATION is set. Set the flag for Atom CPUs. Change-Id: I1ae864e37546298ea222e81349c27cf774ed251f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/6311 Tested-by: build bot (Jenkins) Tested-by: BSI firmware lab <coreboot-labor@bsi.bund.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-24Unify OBJCOPY arguments throughout various x86 stagesStefan Reinauer
Instead of having to have an ifeq() all across the code base, use $(target-objcopy). And correct target-objcopy to a value that objcopy actually understands. Change-Id: Id5dea6420bee02a044dc488b5086d109e806d605 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11090 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-23arch/x86/acpi: Add IVRS table generation routinesTimothy Pearson
Change-Id: Ia5d97d01dc9ddc45f81d998d126d592a915b4a75 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12043 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11cpu/amd: Add CC6 supportTimothy Pearson
This patch adds CC6 power save support to the AMD Family 15h support code. As CC6 is a complex power saving state that relies heavily on CPU, northbridge, and southbridge cooperation, this patch alters significant amounts of code throughout the tree simultaneously. Allowing the CPU to enter CC6 allows the second level of turbo boost to be reached, and also provides significant power savings when the system is idle due to the complete core shutdown. Change-Id: I44ce157cda97fb85f3e8f3d7262d4712b5410670 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11979 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11arm/arm64: Generalize bootblock C entry pointJulius Werner
When we first added ARM support to coreboot, it was clear that the bootblock would need to do vastly different tasks than on x86, so we moved its main logic under arch/. Now that we have several more architectures, it turns out (as with so many things lately) that x86 is really the odd one out, and all the others are trying to do pretty much the same thing. This has already caused maintenance issues as the ARM32 bootblock developed and less-mature architectures were left behind with old cruft. This patch tries to address that problem by centralizing that logic under lib/ for use by all architectures/SoCs that don't explicitly opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option). This works great out of the box for ARM32 and ARM64. It could probably be easily applied to MIPS and RISCV as well, but I don't have any of those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and leave that for later cleanup. BRANCH=None BUG=None TEST=Built Jerry and Falco, booted Oak. Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/12076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-11-06AMD Bettong: Enable S4 feature for Windows 7zbao
PMIOxEE is for setting USB3 power rail. Set it to S0, otherwise going into hibernation can not be wake up. Change-Id: I692497bad24d745738d670897e725a568c1db114 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11373 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-11-04ACPI: Add functions for DMAR I/O-APIC and HPET entriesNico Huber
Refactor acpi_create_dmar_drhd_ds_pci() and add similar functions for I/O-APICs and MSI capable HPETs. We violate the spec [1] here, which talks about 16-bit source-ids spread over start_bus and path entries. Intel actually uses bus/dev/fn identification for those devices too, and so do we. [1] Intel Virtualization Technology for Directed I/O Architecture Specification Document-Number: D51397 Change-Id: I0fce075961762610d44b5552b71e010511871fc2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12192 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-04ACPI: Make DMAR flags settableNico Huber
Add a parameter to acpi_create_dmar() for the flags field and define flags given by the spec [1]. [1] Intel Virtualization Technology for Directed I/O Architecture Specification Document-Number: D51397 Change-Id: I03ae32f13bb0061bd3b9bef607db175d9b0bc5e1 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/12191 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-03arch/x86/bootblock_normal: Fix failure to buildTimothy Pearson
Fix a function call in the normal path using the original function name and arguments in code that was changed in commit 3bfd7cc6 (drivers/pc80: Rework normal / fallback selector code) This commit reworked most of the fallback / normal code, however the normal code paths were not fully tested by Jenkins, so this was missed. Change-Id: Ied66334977272a13b7a7307ff4d9f34eb22040aa Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12315 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-31arch/x86: avoid race condition on build.hPatrick Georgi
Change-Id: I15375ac1247b7cc8d80d910a767c7f3e67eb8739 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11904 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-30wakeup: Switch back to 32bit mode firstStefan Reinauer
On x86_64 we need to leave long mode before we can switch to 16bit mode. Oh joy! When's my 64bit resume pointer coming? Why didn't this get caught earlier? Seems the Asrock E350M2 didn't do Suspend/Resume? Yes, I know it's Intel syntax. Will be converted to AT&T syntax as soon as the whole thing actually works.. 8) Change-Id: Ic51869cf67d842041f8842cd9964d72a024c335f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11106 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-16arch/x86/smbios: Add Crucial DIMM manufacturer IDTimothy Pearson
Change-Id: I975142351c0c033f9dc44670dcf819d296896921 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11934 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-10-16arch/x86/boot/smbios: Add SPD IDs for Kingston and CorsairTimothy Pearson
Change-Id: I6a32b69d3b75d7d086dc7f8ea1e195473399f406 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11933 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-10-14x86: add standalone verstage supportAaron Durbin
To support x86 verstage one needs a working buffer for vboot. That buffer resides in the cache-as-ram region which persists across verstage and romstage. The current assumption is that verstage brings cache-as-ram up and romstage tears cache-as-ram down. The timestamp, cbmem console, and the vboot work buffer are persistent through in both romstage and verstage. The vboot work buffer as well as the cbmem console are permanently destroyed once cache-as-ram is torn down. The timestamp region is migrated. When verstage is enabled the assumption is that _start is the romstage entry point. It's currently expected that the chipset provides the entry point to romstage when verstage is employed. Also, the car_var_*() APIs use direct access when in verstage since its expected verstage does not tear down cache-as-ram. Lastly, supporting files were added to verstage-y such that an x86 verstage will build and link. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados using separate verstage. Change-Id: I097aa0b92f3bb95275205a3fd8b21362c67b97aa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11822 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-08arch/x86/bootblock: Do not include non-code files in bootblock.SAlexandru Gagniuc
Since we now have more freedom in the bootblock linking step it no longer makes sense to use a monolithic bootblock.S. Code segments must still be included as the order in bootblock.S determines code flow. However, non-code flow related assembly stubs don't need to be directly included in bootblock.S Change-Id: I08e86e92d82bd2138194ed42652f268b0764aa54 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11792 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-08arch/x86: Link walkcbfs.S instead on including it in bootblock.SAlexandru Gagniuc
The code flow doesn't fall through to walkcbfs, as it does in the rest of bootblock.S. Instead, walkcbfs is called (albeit via a jmp). The linker cannot know this when walkcbfs.S is included directly. When we use a CAR bootblock, we lose several hundred bytes because walkcbfs is not garbage-collected, yet it isn't used. This problem is solved by assembling walkcbfs.S separately, and linking it. Change-Id: Ib3a976db09b9ff270b7677cb4f9db80b0b025e22 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11785 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-08arch/x86/bootblock: Link in object files selected with bootblock-yAlexandru Gagniuc
As part of preparing for systems with non-memory-mapped media, we want to be able to call into C code. This change allows us to link C code directly into the bootblock. The steps of going from bootblock main() to CAR setup to C code will be implemented in subsequent patches. Note that a few files selected with bootblock-y will now be compiled for the bootblock as well, but since we enabled garbage collection, they will not be included in the final binary. Change-Id: I5ca6dcaf176f5469c6a3bb925859399123493bc6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11783 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-08arch/x86/Makefile.inc: Simplify rule for bootblock.debugAlexandru Gagniuc
The only difference between the ifeq/else/endif guarded rules is the linker flags specific to x86. Add those flags to LDFLAGS_bootblock, and only use one rule for bootblock.debug. Change-Id: I986a93e0418f05fb273512d7efe0573052493332 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11782 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-07x86/bootblock: Use LDFLAGS_bootblock to enable garbage collectionAlexandru Gagniuc
The x86 bootblock linking is a mess. The bootblock is treated in a very special manner, and never received the update to link-time garbage collection. On newer x86 platforms, the boot media is no longer memory-mapped. That means we need to do a lot more setup in the bootblock. ROMCC is unsuitable for this task, and walkcbfs only works on memory-mapped CBFS. We need to revise the x86 bootflow for this new case. The approach this patch series takes is to perform CAR setup in the bootblock, and load the following stage (either romstage or verstage) from the boot media. This approach is not new, but has been done on our ARM ports for years. Since we will be adding .c files to the bootblock, it is prudent to use link-time garbage collection. This is also consistent to how we do things on other architectures. Unification FTW! Change-Id: I16b78456df56e0053984a9aca9367e2542adfdc9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11781 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-30x86: prepare cache-as-ram to allow multiple stagesAaron Durbin
In order to do a verification of romstage on x86 one needs to run verstage which verifies romstage (and the memory init code). However, x86 doesn't have SRAM like every other modern SoC so managing the cache-as-ram region is especially critical. First move all of the "shared" objects to the beginning of the .car.data section. This change then ensures that each stage using car.ld to link has the same consistent view of the addresses of these fixed-sized objects in cache-as-ram. The CAR_GLOBALs can be unique per stage. However, these variables are expected to have a value of zero at the start of each stage. In order to allow a stage to provide those semantics outside of the initial cache-as-arm setup routine add _car_global_start and _car_global_end symbols. Those symbols can be used to clear the CAR_GLOBALs for that stage. Note that the timestamp region can't be moved out similarly to the pre-ram cbmem console because the object storage of the timestamp cache is used *after* cache-as-ram is torn down to indicate if the cache should be used or not. Therefore, that timestamp needs to migrated to ram. A logic change in src/lib/timestamp.c could alleviate this requirement, but that task wasn't tackled in this patch. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Change-Id: I15e9f6b0c632ee5a2369da0709535d6cb0d94f61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11740 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-30x86: provide common macro for linking early stagesAaron Durbin
In order to support verstage on x86 one needs to link verstage like romstage since it needs all the cache-as-ram goodies. Therefore, provide a macro that one can invoke that provides the necessary recipes for linking that particular stage in such an environment. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Change-Id: I12f4872df09fff6715829de68fc374e230350c2e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11739 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-29Makefile: Replace the way to test if a string is emptyzbao
The output of command below, # i386-elf-nm build/cbfs/fallback/romstage_null.offenders | \ grep -q "" ; echo $? has different result on MacOS, OS X Mavericks, which outputs 0. On linux, it outputs 1. I assume it is misleading to search an empty string in a empty string. Change it to testing if the string is empty. Change-Id: Ie4b8fe1fb26df092e2985937251a49feadc61eb0 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11600 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-09-16x86: remove double link step for romstageAaron Durbin
Now that cbfstool supports XIP for romstage utilize it. This removes the double link steps with the cbfstool locate and add-stage sandwich. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted on glados. Change-Id: I1ec555f523a94dd4b15fe8186cbe530520c622c0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11670 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09x86: link ramstage the same way regardless of RELOCATABLE_RAMSTAGEAaron Durbin
Previously there were 2 paths in linking ramstage. One was used for RELOCATABLE_RAMSTAGE while the other was fixed location. Now that rmodtool can handle multiple secitons for a single proram segment there's no need for linking ramstage using lib/rmodule.ld. That also means true rmodules don't have symbols required for ramstage purposes so fix memlayout.h. Lastly add default rules for creating rmod files from the known file names and locations. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built rambi. Inspected ramstage.debug as well as rmodules created during the build. Change-Id: I98d249036c27cb4847512ab8bca5ea7b02ce04bd Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11524 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09linking: add and use LDFLAGS_commonAaron Durbin
Add an LDFLAGS_common variable and use that for each stage during linking within all the architectures. All the architectures support gc-sections, and as such they should be linking in the same way. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built rambi and analyzed the relocatable ramstage. Change-Id: I41fbded54055455889b297b9e8738db4dda0aad0 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11522 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2015-09-09x86: link romstage and ramstage with 1 fileAaron Durbin
To reduce file clutter merge romstage.ld and ramstage.ld into a single memlayout.ld. The naming is consistent with other architectures and chipsets for their linker script names. The cache-as-ram linking rules are put into a separate file such that other rules can be applied for future verstage support. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built rambi and dmp/vortex86ex. Change-Id: I1e8982a6a28027566ddd42a71b7e24e2397e68d2 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11521 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09rmodule: use program.ld for linkingAaron Durbin
Bring rmodule linking into the common linking method. The __rmodule_entry symbol was removed while using a more common _start symbol. The rmodtool will honor the entry point found within the ELF header. Add ENV_RMODULE so that one can distinguish the environment when generating linker scripts for rmodules. Lastly, directly use program.ld for the rmodule.ld linker script. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built rambi and analyzed the relocatable ramstage, sipi_vector, and smm rmodules. Change-Id: Iaa499eb229d8171272add9ee6d27cff75e7534ac Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11517 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09x86: link romstage like the other architecturesAaron Durbin
All the other architectures are using the memlayout for linking romstage. Use that same method on x86 as well for consistency. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built a myriad of boards. Analyzed readelf output. Change-Id: I016666c4b01410df112e588c2949e3fc64540c2e Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11510 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09x86: link ramstage like the other architecturesAaron Durbin
All the other architectures are using the memlayout for linking ramstage. The last piece to align x86 is to use arch/header.ld and the macros within memlayout.h to automaticaly generate the necessary linker script. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built a myriad of boards. Analyzed readelf output. Change-Id: I012c9b88c178b43bf6a6dde0bab821e066728139 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11508 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09linking: lay the groundwork for a unified linking approachAaron Durbin
Though coreboot started as x86 only, the current approach to x86 linking is out of the norm with respect to other architectures. To start alleviating that the way ramstage is linked is partially unified. A new file, program.ld, was added to provide a common way to link stages by deferring to per-stage architectural overrides. The previous ramstage.ld is no longer required. Note that this change doesn't handle RELOCATABLE_RAMSTAGE because that is handled by rmodule.ld. Future convergence can be achieved, but for the time being that's being left out. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built a myriad of boards. Change-Id: I5d689bfa7e0e9aff3a148178515ef241b5f70661 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11507 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2015-09-09x86: provide minimum alignment for romstageAaron Durbin
The current way the XIP address of romstage is calculated is by doing a 'cbfstool locate' using a bin file of romstage linked at address 0. That address is then used for re-linking romstage at the address spit out by cbfstool. Currently, the linker actually sets minimum alignment on the text sections as 32 bytes, but it doesn't actually honor that value. Instead, provide a minimum alignment for romstage so as not to fight the linker. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built asus/kfsn4-dre. Confirmed ROMSTAGE_BASE == gdtptr. Change-Id: Id6ec65d257df9ede78c720b0d7d4b56acfbb3f15 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11588 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09x86: remove unused sections from romstage.ldAaron Durbin
Now that the only source of ELF sections for romstage are from directly included .inc files or ROMCC generated inc files the subsection globs can be removed. i.e. Remove .rom.data.* and .rom.text.* listings. Lastly, put the .rom.data section directly after the .rom.text. They are by definition read-only and they are generated from the same place. BUG=chrome-os-partner:44827 BRANCH=None TEST=Spot checked !ROMCC and ROMCC boards. Confirmed only .rom.text .rom.data sections exist. Change-Id: Id17cf95c943103de006c5f3f21a625838ab49929 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11505 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 13:06:02 +0000