summaryrefslogtreecommitdiff
path: root/src/arch/x86/Kconfig
AgeCommit message (Collapse)Author
2018-11-08toolchain: Add POSTCAR as a stage we have a toolchain forPatrick Georgi
Fixes building vb2lib for postcar. Since postcar is an x86ism, add the Kconfig options only for x86. Change-Id: Ib92436bc7270c24689dcf01a47f0c6fe7661814b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29395 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22arch/x86: Implement common CF9 resetNico Huber
It's very common across many x86 silicon vendors, so place it in `arch/x86/`. Change-Id: I06c27afa31e5eecfdb7093c02f703bdaabf0594c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-11selfboot: remove bounce buffersRonald G. Minnich
Bounce buffers used to be used in those cases where the payload might overlap coreboot. Bounce buffers are a problem for rampayloads as they need malloc. They are also an artifact of our x86 past before we had relocatable ramstage; only x86, out of the 5 architectures we support, needs them; currently they only seem to matter on the following chipsets: src/northbridge/amd/amdfam10/Kconfig src/northbridge/amd/lx/Kconfig src/northbridge/via/vx900/Kconfig src/soc/intel/fsp_baytrail/Kconfig src/soc/intel/fsp_broadwell_de/Kconfig The first three are obsolete or at least could be changed to avoid the need to have bounce buffers. The last two should change to no longer need them. In any event they can be fixed or pegged to a release which supports them. For these five chipsets we change CONFIG_RAMBASE from 0x100000 (the value needed in 1999 for the 32-bit Linux kernel, the original ramstage) to 0xe00000 (14 Mib) which will put the non-relocatable x86 ramstage out of the way of any reasonable payload until we can get rid of it for good. 14 MiB was chosen after some discussion, but it does fit well: o Fits in the 16 MiB cacheable range coreboot sets up by default o Most small payloads are well under 14 MiB (even kernels!) o Most large payloads get loaded at 16 MiB (especially kernels!) With this change in place coreboot correctly still loads a bzImage payload. Werner reports that the 0xe00000 setting works on his broadwell systems. Change-Id: I602feb32f35e8af1d0dc4ea9f25464872c9b824c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/28647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-06arch/x86: Always select RELOCATABLE_MODULESKyösti Mälkki
All boards except those with NO_RELOCATABLE_RAMSTAGE or explicit select already had this feature built. Change-Id: I838e12141243ec49c2555c09269e07476eb0cfad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-06arch/x86: Drop leftover ROMCC supportKyösti Mälkki
Remove the last bits of building romstage with romcc. Change-Id: I70bb1ed23a5aeb87bf7641e0b0bd604a4e622e61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-05-28arch/x86: Define HPET_ADDRESS_OVERRIDEKyösti Mälkki
Symbol defined in via/cx700 but also used elsewhere. Change-Id: I31d6043e71dea474de00f609b9609a628ecc6eb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-26arch/x86: allow idt to be available to link in all stagesAaron Durbin
Add Kconfig IDT_IN_EVERY_STAGE to optionally specify having the interrupt handling code available to all stages. In order to do this the idt setup is moved to a C module. The vecX entries are made global so that a table of references to all the interrupt vector entry points can be used to dynamically initialize the idt. The ramification for ramstage is that exceptions are initialized later (lib/hardwaremain.c). Not all stages initialize exceptions when this Kconfig variable is selected, but bootblock for the C, stages using assembly_entry.S, and of course ramstage do. Anything left out just needs a call to exception_init() at the right location. BUG=b:72728953 Change-Id: I4146a040e5e43bed7ccc6cb0a7dc2271f1e7b7fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-25arch/x86: add support for cache-as-ram pagingAaron Durbin
Processors, such as glk, need to have paging enabled while in cache-as-ram mode because the front end is agressive about fetching lines into the L1I cache. If the line is dirty and in the L1D then it writes it back to "memory". However, in this case there is no backing store so the cache-as-ram data that was written back transforms to all 0xff's when read back in causing corruption. In order to mitigate the failure add x86 architecture support for enabling paging while in cache-as-ram mode. A Kconfig variable, NUM_CAR_PAGE_TABLE_PAGES, determines the number of pages to carve out for page tables within the cache-as-ram region. Additionally, the page directory pointer table is also carved out of cache-as-ram. Both areas are allocated from the persist-across-stages region of cache-as-ram so all stages utilizing cache-as-ram don't corrupt the page tables. The two paging-related areas are loaded by calling paging_enable_for_car() with the names of cbfs files to load the initial paging structures from. BUG=b:72728953 Change-Id: I7ea6e3e7be94a0ef9fd3205ce848e539bfbdcb6e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-25arch/x86: allow timestamp source to not be TSCAaron Durbin
Some x86 platforms don't have a TSC that is invariant w.r.t. rate to get accurate timestamps. As such a different timestamp is required. Therefore, allow one to specify non-TSC timestamp source and not compile in the default x86 TSC code. BUG=b:72378235,b:72170796 Change-Id: I737fcbba60665b3bc2b5864269536fda78b44d90 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2017-09-22arch/x86: Enable ebda library for romstage and postcarSubrata Banik
This patch provides a kconfig option as EARLY_EBDA_INIT to ensures user can make use of EBDA library even during early boot stages like romstage, postcar. Change-Id: I603800a531f56b6ebd460d5951c35a645fbfe492 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06arch/x86/Kconfig: Add deprecation warnings for LATE_CBMEM_INITJonathan Neuschäfer
The deprecation of late (post-romstage) CBMEM initialization was announced in this blog post: https://blogs.coreboot.org/blog/2017/05/08/announcing-coreboot-4-6/ There are two warnings: * In LATE_CBMEM_INIT's help text, I've added a multi-line warning, that aims to explain the problem. * In src/mainboard/Kconfig (just below the mainboard selection), there's a warning which points the user at LATE_CBMEM_INIT, if such a board is selected. Also update the function that needs to be implemented, as pointed out by Keith Hui and Kyösti Mälkki. Change-Id: I2d21a6ab2fc2811d44fc4febb05841bb2f8d1857 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-29arch/x86: Add Kconfig option for ACPI \_PR CPU name stringMarc Jones
Add a Kconfig option to change the \PR.CPxx name string. This provides some flexibility when working with table not generated by coreboot. Change-Id: Ibc0c56783c6da80501e2177de96a414b592cb74f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-07-18arch/x86: select RELOCATABLE_MODULES when POSTCAR is selectedAaron Durbin
The postcar relies on the relocatable modules support. Specifically select that dependency. Change-Id: If19c39c3f153cd5a526fdad6fe09b8c309ef024f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20635 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-18CBMEM: Add config CBMEM_TOP_BACKUPKyösti Mälkki
AGESA and binaryPI boards have no easy way to determine correct cbmem_top() location early enough when GFXUMA is enabled, so they will use these functions with EARLY_CBMEM_INIT as well. At the end of AmdInitPost() the decisions of UMA base and size have not been written to hardware yet. The decisions are stored inside AGESA heap object we cannot locate from coreboot proper until after AmdInitEnv(). Modify code such that weak backup functions are only defined for LATE_CBMEM_INIT; they are somewhat troublesome to handle. Change-Id: Ifef4f75b36bc6dee6cd56d1d9164281d9b2a4f2a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19306 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-04-08arch/x86: remove CAR global migration when postcar stage is usedAaron Durbin
When a platform is using postcar stage it's by definition not tearing down cache-as-ram from within romstage prior to loading ramstage. Because of this property there's no need to migrate CAR_GLOBAL variables to cbmem. Change-Id: I7c683e1937c3397cbbba15f0f5d4be9e624ac27f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19215 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-02-14src/Kconfig: Move bootblock behavior to arch/x86 as TODO suggestedMartin Roth
The four options are only used in X86: - BOOTBLOCK_SIMPLE - BOOTBLOCK_NORMAL - BOOTBLOCK_SOURCE - SKIP_MAX_REBOOT_CNT_CLEAR Move them all into src/arch/x86/Kconfig - this puts them in the chipset menu instead of general setup. Verified that this makes no significant changes to any config file. Change-Id: I2798ef67a8c6aed5afac34322be15fdf0c794059 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17909 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-12-16x86: Configure premem cbmem console sizeNaresh G Solanki
Sometime preram cbmem logs are truncated due to lack of space (default preram cbmem console size is 0xc00). Provide Kconfig option to configure preram cbmem console size so that mainboard can configure it to required value. Change-Id: I221d9170c547d41d8bd678a3a8b3bca6a76ccd2e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17839 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28Build system: Update HAVE_CMOS_DEFAULTMartin Roth
- Don't build the cmos.default file into cbfs if USE_OPTION_TABLE isn't specified. - Don't allow HAVE_CMOS_DEFAULT if HAVE_OPTION_TABLE isn't set. Change-Id: I92401e892f09fc95d4b3fd7418cdbd10ed033fa8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17454 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-07-31src/arch: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: Ia6ac94a93b48037a392a9aec2cd19cd80369173f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15953 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-17Define RAMTOP for x86 onlyKyösti Mälkki
This Kconfig is deprecated, new platforms need to locate ramstage stack in CBMEM instead. Change-Id: I20ece297302321337cc2ce17fdef0c55242a4fc3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15189 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-11arch/x86: Support "weak" BIST and timestamp save routinesLee Leahy
Not all x86 architectures support the mm register set. The default routine that saves BIST in mm0 and a "weak" routine that saves the TSC value in mm2:mm1. Select the Kconfig value BOOTBLOCK_SAVE_BIST_AND_TIMESTAMP to provide a replacement routine to save the BIST and timestamp values. TEST=Build and run on Amenia and Galileo Gen2. Change-Id: I8119e74664ac3522c011767d424d441cd62545ce Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15126 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-11arch/x86: Add debug spinloops in assembly_entry.SLee Leahy
Use Kconfig values to enable debug spinloops in assembly_entry.S. This makes it easy to debug the assembly code. TEST=Build and run on Galileo Gen2 Change-Id: Ic56bf2260b8e3181403623961874c9289f3ca945 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/15135 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-11arch/x86: Add debug spinloopLee Leahy
Conditionally add a debug spinloop to enable easy connection of JTAG debuggers. TEST=Build and run on Galileo Gen2 with a JTAG debugger. Change-Id: I7a21f9e6bfb10912d06ce48447c61202553630d0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15127 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-23arch/x86: introduce postcar stage/phaseAaron Durbin
Certain chipsets don't have a memory-mapped boot media so their code execution for stages prior to DRAM initialization is backed by SRAM or cache-as-ram. The postcar stage/phase handles the cache-as-ram situation where in order to tear down cache-as-ram one needs to be executing out of a backing store that isn't transient. By current definition, cache-as-ram is volatile and tearing it down leads to its contents disappearing. Therefore provide a shim layer, postcar, that's loaded into memory and executed which does 2 things: 1. Tears down cache-as-ram with a chipset helper function. 2. Loads and runs ramstage. Because those 2 things are executed out of ram there's no issue of the code's backing store while executing the code that tears down cache-as-ram. The current implementation makes no assumption regarding cacheability of the DRAM itself. If the chipset code wishes to cache DRAM for loading of the postcar stage/phase then it's also up to the chipset to handle any coherency issues pertaining to cache-as-ram destruction. Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-15x86: Drop CONFIG_COMPILE_IN_DSDTStefan Reinauer
This option is no longer needed, as FMAP support has been fully integrated in coreboot Change-Id: I6121b31bf946532717ba15e12f5c63d2baa95ab2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-05Kconfig: hide useless options on ARM.Vladimir Serbinenko
Those options have no effect or lead to compile error on ARM due to fundamental incompatibilities. Add proper "depends on" clauses to hide them. Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13904 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03arch/x86: Allow soc/chipset to set linking addressAndrey Petrov
Until recently x86 romstage used to be linked at some default address. The address itself is not meaningful because the code was normally relocated at address calculated during insertion in CBFS. Since some newer SoC run romstage at CAR it became useful to link romstage code at some address in CAR and avoid relocation during build/run time altogether. Change-Id: I11bec142ab204633da0000a63792de7057e2eeaf Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13860 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-17arch/x86: Add option to disable default mmap_boot implementationAlexandru Gagniuc
On certain platforms, the boot media is either not memory-mapped, or not mapped at the top of 4G. This makes the default mmap_boot implementation unsuitable. Add an option to allow such platforms to define their own mapping implementation. Change-Id: I8293126fd9cc1fd3d75072f7811e659765348e4a Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-13x86: make bootblock size for C_ENVIRONMENT_BOOTBLOCK configurableAaron Durbin
Certain platforms may need to limit their bootblock size to within a given size because specific constraints. Allow the size to be provided by the mainboard or chipset by way of the arch Kconfig being processed after those. Change-Id: I46cc6315918cde575070fa2d3e2514f28008f575 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13691 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-11arch/x86: Change how BOOTBLOCK_CUSTOM is selected by defaultAndrey Petrov
Currently x86s select BOOTBLOCK_CUSTOM by default. With this change BOOTBLOCK_CUSTOM is selected only if C bootblock isn't. Change-Id: I218f3b4044175b89697790c82c384b0f85a27ade Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13642 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-03xcompile: Add a way to specify -march=i586Martin Roth
Instead of instructing users to edit xcompile when they want to build a quark platform, give the build a way to set -march=586 so that the quark code will build correctly. The Quark processor does not support the instructions introduced with the Pentium 6 architecture. Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13552 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2015-11-11arm/arm64: Generalize bootblock C entry pointJulius Werner
When we first added ARM support to coreboot, it was clear that the bootblock would need to do vastly different tasks than on x86, so we moved its main logic under arch/. Now that we have several more architectures, it turns out (as with so many things lately) that x86 is really the odd one out, and all the others are trying to do pretty much the same thing. This has already caused maintenance issues as the ARM32 bootblock developed and less-mature architectures were left behind with old cruft. This patch tries to address that problem by centralizing that logic under lib/ for use by all architectures/SoCs that don't explicitly opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option). This works great out of the box for ARM32 and ARM64. It could probably be easily applied to MIPS and RISCV as well, but I don't have any of those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and leave that for later cleanup. BRANCH=None BUG=None TEST=Built Jerry and Falco, booted Oak. Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/12076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-06-23acpi: bring back ability to link DSDT into ramstagePatrick Georgi
Bring back the ability to link in the DSDT. This is to help Chrome OS to switch over to a new upstream quickly (because some of the custom built mechanisms are a pain with tons of files). This is supposed to be temporary (famous last words), but I'd rather fix the lack of CBFS awareness in CrOS bit for good in the time I usually spend on keeping upstream and CrOS branches close. Change-Id: I7fa5540bbf5c568c4adca56a09c83b6c7e358ad5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-16Add x64 support to src/arch/x86/KconfigStefan Reinauer
Change-Id: I81f6d8a21ea0d8218f5a4aab2feb39be32f88e01 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/8692 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10x86: Support reset routines in bootblockLee Leahy
Expand the boot block include file to allow for a file containing reset routines to be added. Prevent breaking existing platforms by using a Kconfig value to specify the path to this file, and have the code include this file only if the Kconfig value is set. BRANCH=none BUG=None TEST=Build and run on Glados Change-Id: I604f701057d7018f2ed9c3ba49a643c4bca13f00 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c109481d9503916e19ed300c1a3f085e0d2b5c51 Original-Change-Id: I3214399f8156b5ea2ef709ce77e3915cea1523a3 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/248300 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/9504 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
With kconfig understanding wildcards, we don't need Kconfig files that just include other Kconfig files anymore. Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9298 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-02Clean up architecture-specific KconfigsJulius Werner
It's an unfortunate side effect of our different-archs-per-stage mechanism that all src/arch/*/Kconfig files are always parsed with no if blocks to exclude them if they're not relevant. This makes it very easy to accidentally rely on a Kconfig default set by a totally different and not applying architecture. This patch moves a few Kconfigs from ARM and X86 that leaked out like this into a common Kconfig file for clarity. It also gives ARM64 its own BOOTBLOCK_CUSTOM mechanism so that it doesn't leech off the ARM one (currently not used by any board). In the future, we should maybe prefix all options in the arch/*/Kconfig files with the architecture name (such as X86_BOOTBLOCK_NORMAL and ARM_LPAE are already doing), to make it more apparent when they are used in the wrong place. BUG=None TEST=None (tested together with dependent changes) Change-Id: I3e8bb3dfbb2c4edada621ce16d130bd7387d4eb8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5528aa9252cdf711af3c160da387c6a7bebe9e76 Original-Change-Id: Ieb2d79bae6c6800be0f93ca3489b658008b1dfae Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/219171 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9235 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-03-17arch/x86/Kconfig: Add license headerStefan Reinauer
Add license header with copyright of the original authors. Change-Id: I8c55bb38a2a2a387ad2461e11d402c7392fa2497 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8691 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-10x86 cache-as-ram: Remove BROKEN_CAR_MIGRATE optionKyösti Mälkki
This was added to handle cases of Intel FSP platforms that had EARLY_CBMEM_INIT but could not migrate CAR variables to CBMEM. These boards were recently fixed. To support combination of EARLY_CBMEM_INIT without CAR migration was added maintenance effort with little benefits. You had no CBMEM console for romstage and the few timestamps you could store were circulated via PCI scratchpads or CMOS nvram. Change-Id: I5cffb7f2b14c45b67ee70cf48be4d7a4c9e5f761 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8636 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Tidy up CAR migrationKyösti Mälkki
Move the CAR migration call to arch -specific part of CBMEM init, it is truly a x86 specific thing. Change-Id: I715417e54f197b8745e0670d6b900a5660178141 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7860 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-27vboot2: add verstageStefan Reinauer
This reverts the revert commit 5780d6f3876723b94fbe3653c9d87dad6330862e and fixes the build issue that cuased it to be reverted. Verstage will host vboot2 for firmware verification. It's a stage in the sense that it has its own set of toolchains, compiler flags, and includes. This allows us to easily add object files as needed. But it's directly linked to bootblock. This allows us to avoid code duplication for stage loading and jumping (e.g. cbfs driver) for the boards where bootblock has to run in a different architecture (e.g. Tegra124). To avoid name space conflict, verstage symbols are prefixed with verstage_. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac Original-Reviewed-on: https://chromium-review.googlesource.com/204376 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> (cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf Reviewed-on: http://review.coreboot.org/8224 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-14AMD: Move RAMBASE and RAMTOPKyösti Mälkki
There are no reasons to not load ramstage @ 0x100000. Boards with HAVE_ACPI_RESUME enabled have performance penalty in using excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS. Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7094 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-05-10Arch-level Kconfig menu cleanupFurquan Shaikh
Remove arch-level Kconfig menu option as it shows all available architectures in make menuconfig. Instead pull the bootblock options for choice and update image to top-level Kconfig since it is already present for both x86 and arm. Change-Id: Iab9c4539f05cd54a7f751565fefcaf7b6f0edc86 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5673 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-02-06MTRR: Mark all prefetchable resources as WRCOMB.Vladimir Serbinenko
Change-Id: I2ecfd9733b65b6160bc2232d22db7b16692a847f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5149 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-22X86: make the SIPI num_starts a config variableRonald G. Minnich
The code to figure out how to set num_starts was starting to get kludgy. It's a constant for a given CPU; constants should be constant; make it a config variable. This change includes an example of how to override it. Build but not boot tested; drivers welcome. Change-Id: Iddd906a707bb16251615c7b42f2bfb5a044379b4 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3796 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-07-14x86: Add and enable an arch verson of memmove.Gabe Black
This is from memcpy_32.c in the Linux kernel. There was no copyright header in the original file either. Change-Id: Ifd259cb8a87615dce79ed1e551cc4bacb0414b4f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3762 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-11Move the HAVE_ARCH_* config options from src/arch/x86 to src/.Gabe Black
The options that keep track of whether there are arch versions of the standard string functions shouldn't be in the arch/x86 directory since they apply to all architectures. Move them into the higher level, shared Kconfig defaulting to off. Then, in each applicable arch (currently all of them) they can be selected to on. Change-Id: I7ea64a583230fdc28773f17fd7cc23e0f0a5f3d6 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3760 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-10arch: clean up Kconfig and MakefileStefan Reinauer
remove some unused code Change-Id: I41602fb391c1910c588a4f9dcc7c2edefe8ab5bc Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3669 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-04Move the MARK_GRAPHICS_MEM_WRCOMB to x86 architectureRonald G. Minnich
The MARK_GRAPHICS_MEM_WRCOMB was spreading like a cancer since it was defined in sandybridge. It is really more of an x86 thing however, and we now have three systems that can use it. I considered making this more general, since it technically can apply to PTE-based systems like ARM, and maybe we should. But the 'WRCOMB' moniker is usually closely tied to the x86. Change-Id: I3eb6eb2113843643348a5e18e78c53d113899ff8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3349 Tested-by: build bot (Jenkins)
2013-06-02Provide sane Kconfig default for cmos.default.Denis 'GNUtoo' Carikli
Without that fix we have with CONFIG_USE_OPTION_TABLE: OPTION cmos_layout.bin build/util/nvramtool/nvramtool -y /home/gnutoo/x86/coreboot-alix/src/mainboard/pcengines/alix1c/cmos.layout -L build/cmos_layout.bin make: *** No rule to make target `nvramtool', needed by `build/coreboot.pre1'. Stop. rm build/util/sconfig/sconfig.tab.c build/cbfs/fallback/bootblock.elf build/util/sconfig/lex.yy.c That log was captured with make V=1 but the error also appear with make. Tested on the PC Engines ALIX.1C with the following commit (Change-Id: Ia87b090) [1]: PC Engines ALIX.1C: Add CMOS defaults. [1] http://review.coreboot.org/#/c/3323/ Change-Id: I548005a58f430ed7b6da5249a24bbdcae440a1e9 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3223 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-11-30Add mainboard hook to bootblockKyösti Mälkki
Change allows to override default bootblock_mainboard_init() with mainboard-specific code. If the default bootblock_mainboard_init() handler is replaced, with one from file BOOTBLOCK_MAINBOARD_INIT, one needs to take care the replacement calls all the necessary bootblock_x_init() functions. Change-Id: Ie8c667cdba7cafe9ed2d4b19ab2bd21d941ad4ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1845 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Drop Kconfig.deprecated_optionsStefan Reinauer
Both remaining options, DRIVERS_PS2_KEYBOARD and ID_SECTION_OFFSET are not likely to go away any time soon, so let's not keep them in Kconfig.deprecated_options but move them close to the code they control. Change-Id: I310b877c5b3d5a3444056641c4aee07a48c4c4be Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1839 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Reduce default stack size to 4KStefan Reinauer
coreboot uses about 2K of stack on the BSP, and about 1K of stack on the APs. No reason to use an overdimensonal stack of 32k per core/thread. Change-Id: I734c240b992d40e1e35db3df5437c36da0a755cf Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1780 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12Add dependency for CONFIG_AP_IN_SIPI_WAITStefan Reinauer
Change-Id: Ia20c138dae1fc1382abe74303e1117472c513d1d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1779 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-10-08hpet: common ACPI generationPatrick Georgi
HPET's min ticks (minimum time between events to avoid losing interrupts) is chipset specific, so move it to Kconfig. Via also has a special base address, so move it as well. Apart from these (and the base address was already #defined), the table is very uniform. Change-Id: I848a2e2b0b16021c7ee5ba99097fa6a5886c3286 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1562 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-07-31Revert "Use broadcast SIPI to startup siblings"Sven Schnelle
This reverts commit 042c1461fb777e583e5de48edf9326e47ee5595f. It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I7dd1cba5a4c1e4b0af366b20e8263b1f6f4b9714 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1381 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-02Use broadcast SIPI to startup siblingsSven Schnelle
The current code for initializing AP cpus has several shortcomings: - it assumes APIC IDs are sequential - it uses only the BSP for determining the AP count, which is bad if there's more than one physical CPU, and CPUs are of different type Note that the new code call cpu->ops->init() in parallel, and therefore some CPU code needs to be changed to address that. One example are old Intel HT enabled CPUs which can't do microcode update in parallel. Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1139 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-06Fix support for RAM-less multi-processor initKyösti Mälkki
Fix regression after commit: 7dfe32c5408916b6cb23f1ec48e473e1c728d300 Only align 16-bit entry on platforms that really require it, indicated by selecting SIPI_VECTOR_IN_ROM in CPU Kconfig. Disable assertion test of AP_SIPI_VECTOR for platforms not depending on this feature. Build of romstage should be fixed to get the vector address from bootblock build automatically. Change-Id: Ide470833c0254df1a9ff708369ab1c095ccfb98d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/875 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-30Make PCI CONF2 support a compile time optionStefan Reinauer
It's not used on any board supported by coreboot but has been detected at run time since ages. No new boards (since 2000?) are using the CONF2 method, so it is unlikely we ever have to turn this on for a board. Change-Id: I17df94a8a77b9338fde10a6b114b44d393776e66 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/758 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Add native memset() function on x86Stefan Reinauer
Change-Id: Ia118ebe0a4b59bdcefd78895141a365170f6aed2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/737 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-03-30Add faster, architecture dependent memcpy()Stefan Reinauer
Change-Id: I38d15f3f1ec65f0cb7974d2dd4ae6356433bddd8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/736 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-03-25Makefile: rename linker intermediate variableKyösti Mälkki
Renamed CONFIG_ROMBASE to ROMSTAGE_BASE and removed it from Kconfig. Removed no-op calculation in ldscript. Change-Id: I53d39b60f07db76c8537b3133e59360687b9d4a7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/802 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-16Via Epia-N and C3: Set ioapic delivery type in KconfigPatrick Georgi
The original comment says it's a Via C3 and not Epia requirement to deliver IOAPIC interrupts on APIC serial bus. Change-Id: I73c55755e0ec1ac5756b4ee7ccdfc8eb93184e4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/435 Tested-by: build bot (Jenkins)
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-04-21more ifdef -> if fixes.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6537 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14drop incorrectly used CONFIG_ROM_IMAGE_SIZE and unused CONFIG_ARCHStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6496 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Move cmos.default handling to bootblockPatrick Georgi
The cmos.default code wasn't actually used so far, due to an oversight when forward-porting this feature from an old branch. - Extend walkcbfs' use by factoring out the stage handling into C code. - New sanitize_cmos() function that looks if CMOS data is invalid and cmos.default exists and if so overwrites CMOS with cmos.default data. - Use sanitize_cmos() in both bootblock implementations. - Drop the need to reboot after writing CMOS: CMOS wasn't used so far, so we can go on without a reboot. - Remove the restriction that cmos.default only works on CAR boards. - Always build in cmos.default support on boards that USE_OPTION_TABLE. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6436 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-14Disable CMOS recovery code for ROMCC boards as the CBFS code used forPatrick Georgi
that feature is not ROMCC compatible. Fixes build errors introduced in r6253. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6255 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-14Allow coreboot to initialize CMOS if checksum is invalid.Patrick Georgi
If a file "cmos.default", type "cmos default"(0xaa) is in CBFS, a wrong checksum leads to coreboot rewriting the first 128 bytes (except for clock data) with the data in cmos.default, then reboots the system so every component of coreboot works with the same set of values. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6253 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-05move single options out of main menu and remove stray "options"Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6244 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16- Fix shortcoming in Kconfig when handling multiple "choice"sStefan Reinauer
- move some variables where they belong Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6186 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11After this has been brought up many times before, rename src/arch/i386 toStefan Reinauer
src/arch/x86. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6161 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 23:06:46 +0000