summaryrefslogtreecommitdiff
path: root/src/arch/riscv/boot.c
AgeCommit message (Collapse)Author
2018-11-05riscv: add support to block smp in each stageXiang Wang
Each stage performs some basic initialization (stack, HLS etc) and then call smp_pause to enter the single-threaded state. The main work of each stage is executed in a single-threaded state, and the multi-threaded state is restored by call smp_resume while booting the next stage. Change-Id: I8d508c3d0f65a022010e74f8edad7ad2cfdc7dee Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/29024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-10-11selfboot: remove bounce buffersRonald G. Minnich
Bounce buffers used to be used in those cases where the payload might overlap coreboot. Bounce buffers are a problem for rampayloads as they need malloc. They are also an artifact of our x86 past before we had relocatable ramstage; only x86, out of the 5 architectures we support, needs them; currently they only seem to matter on the following chipsets: src/northbridge/amd/amdfam10/Kconfig src/northbridge/amd/lx/Kconfig src/northbridge/via/vx900/Kconfig src/soc/intel/fsp_baytrail/Kconfig src/soc/intel/fsp_broadwell_de/Kconfig The first three are obsolete or at least could be changed to avoid the need to have bounce buffers. The last two should change to no longer need them. In any event they can be fixed or pegged to a release which supports them. For these five chipsets we change CONFIG_RAMBASE from 0x100000 (the value needed in 1999 for the 32-bit Linux kernel, the original ramstage) to 0xe00000 (14 Mib) which will put the non-relocatable x86 ramstage out of the way of any reasonable payload until we can get rid of it for good. 14 MiB was chosen after some discussion, but it does fit well: o Fits in the 16 MiB cacheable range coreboot sets up by default o Most small payloads are well under 14 MiB (even kernels!) o Most large payloads get loaded at 16 MiB (especially kernels!) With this change in place coreboot correctly still loads a bzImage payload. Werner reports that the 0xe00000 setting works on his broadwell systems. Change-Id: I602feb32f35e8af1d0dc4ea9f25464872c9b824c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/28647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-20arch/riscv: Pass the bootrom-provided FDT to the payloadJonathan Neuschäfer
The RISC-V boot protocol foresees that at every stage boundary (bootrom to boot loader, boot loader -> OS), register a0 contains the Hart ID and a1 contains the physical address of the Flattened Device Tree that the stage shall use. As a first step, pass the bootrom-provided FDT to the payload, unmodified. Change-Id: I468bc64a47153d564087235f1c7e2d10e3d7a658 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Don't set up virtual memoryJonathan Neuschäfer
Due to changes in the RISC-V Privileged Architecture specification, Linux can now be started in physical memory and it will setup its own page tables. Thus we can delete most of virtual_memory.c. Change-Id: I4e69d15f8ee540d2f98c342bc4ec0c00fb48def0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02riscv: Remove config string supportJonathan Neuschäfer
The code dealing with the old config string isn't needed anymore, because the config string has been deprecated in favor of OpenFirmware-derived devicetrees. Change-Id: I71398fb4861dbaf7eefc6e6f222bb7159798fafa Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-12riscv: start to use the configstring functionsRonald G. Minnich
These functions will allow us to remove hardcodes, as long as we can verify the qemu and lowrisc targets implement the configstring correctly. Hence, for the most part, we'll start with mainboard changes first. Define a new config variable, CONFIG_RISCV_CONFIGSTRING, which has a default value that works on all existing systems but which can be changed as needed for a new SOC or mainboard. Change-Id: I7dd3f553d3e61f1c49752fb04402b134fdfdf979 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17256 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-10-24RISCV: Clean up the common architectural codeRonald G. Minnich
This version of coreboot successfully starts a Harvey (Plan 9) kernel as a payload, entering main() with no supporting assembly code for startup. The Harvey port is not complete so it just panics but ... it gets started. We provide a standard payload function that takes a pointer argument and makes the jump from machine to supervisor mode; the days of kernels running in machine mode are over. We do some small tweaks to the virtual memory code. We temporarily disable two functions that won't work on some targets as register numbers changed between 1.7 and 1.9. Once lowrisc catches up we'll reenable them. We add the PAGETABLES to the memlayout.ld and use _pagetables in the virtual memory setup code. We now use the _stack and _estack from memlayout so we know where things are. As time goes on maybe we can kill all the magic numbers. Change-Id: I6caadfa9627fa35e31580492be01d4af908d31d9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17058 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-14arch/riscv: Unconditionally start payloads in machine modeJonathan Neuschäfer
Ron Minnich writes: "we'll change cbfstool to put a header on the payload to jump to supervisor if that is desired. The principal here is that payloads are always started in machine mode, but we want to set the page tables up for them." Change-Id: I5cbfc90afd3febab33835935f08005136a3f47e9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15510 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-02-22die() when attempting to use bounce buffer on non-i386.Vladimir Serbinenko
Only i386 has code to support bounce buffer. For others coreboot would silently discard part of binary which doesn't work and is a hell to debug. Instead just die. Change-Id: I37ae24ea5d13aae95f9856a896700a0408747233 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13750 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-12-10lib: remove assets infrastructureAaron Durbin
Now that only CBFS access is supported for finding resources within the boot media the assets infrastructure can be removed. Remove it. BUG=chromium:445938 BRANCH=None TEST=Built and ran on glados. Change-Id: I383fd6579280cf9cfe5a18c2851baf74cad004e9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12690 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-23RISCV: modify arch_prog_run to handle payloads correctly.Ronald G. Minnich
Unlike the other stages, the payload requires virtual memory to be set up and also a privelege level change. Change-Id: Ibbe2a55f7719d917f121a53a17c6d90e6b2ab3d1 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/11699 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-03program loading: unify on struct progAaron Durbin
Instead of having different structures for loading ramstage and payload align to using struct prog. This also removes arch_payload_run() in favor of the prog_run() interface. Change-Id: I31483096094eacc713a7433811cd69cc5621c43e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8849 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-03program loading: add prog_run() functionAaron Durbin
The prog_run() function abstracts away what is required for running a given program. Within it, there are 2 calls: 1. platform_prog_run() and 2. arch_prog_run(). The platform_prog_run() allows for a chipset to intercept a program that will be run. This allows for CPU switching as currently needed in t124 and t132. Change-Id: I22a5dd5bfb1018e7e46475e47ac993a0941e2a8c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8846 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-03program loading: introduce struct progAaron Durbin
The struct prog serves as way to consolidate program loading. This abstraction can be used to perform more complicated execution paths such as running a program on a separate CPU after it has been loaded. Currently t124 and t132 need to do that in the boot path. Follow on patches will allow the platform to decide how to execute a particular program. Note: the vboot path is largely untouched because it's already broken in the coreboot.org tree. After getting all the necessary patches pushed then vboot will be fixed. Change-Id: Ic6e6fe28c5660fb41edee5fd8661eaf58222f883 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8839 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-20loaders: add program_loading.h header fileAaron Durbin
Instead of two headers for payload and ramstage loading combine the 2 files into one. This also allows for easier refactoring by keeping header files consistent. Change-Id: I4a6dffb78ad84c78e6e96c886d361413f9b4a17d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8708 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-01Add UCB RISCV support for architecture, soc, and emulation mainboard..Ronald G. Minnich
Works in the RISCV version of QEMU. Note that the lzmadecode is so unclean that it needs a lot of work. A cleanup is in progress. We decided in Prague to do this as one thing, because it forms a nice case study of the bare minimum you need to add to get a new architecture going in qemu. Change-Id: If5af15c3a70733d219973e0d032746f8ab027e4d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 16:03:58 +0000