| Age | Commit message (Collapse) | Author |
|---|
|
SoC sdm845 uses ARCH Timer
Change-Id: I45e2d4d2c16a2cded3df20d393d2b8820050ac80
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
New API required by sdm845 DDR init/training protocol
TEST=build & run
Change-Id: I8442442c0588dd6fb5e461b399e48a761f7bbf29
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Instead of writing out '__attribute__((weak))' use a shorter form.
Change-Id: If418a1d55052780077febd2d8f2089021f414b91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
The VA space needs to be extended to support 48bit, as on Cavium SoCs
the MMIO starts at 1 << 47.
The following changes were done to coreboot and libpayload:
* Use page table lvl 0
* Increase VA bits to 48
* Enable 256TB in MMU controller
* Add additional asserts
Tested on Cavium SoC and two ARM64 Chromebooks.
Change-Id: I89e6a4809b6b725c3945bad7fce82b0dfee7c262
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/24970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I89cf4b996405af616f54cf2d9fabd4e258352b03
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/23036
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are now a few architectural extensions available for ARMv8, some
of which introduce instructions or other features that may be useful.
This allows the user to select an extension implemented on their SoC
which will set the -march option passed into the compiler.
Change-Id: Ifca50dad98aab130ac04df455bac2cfb65abf82e
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/23641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch changes the way coreboot builds ARM TF to pass the new
COREBOOT flag introduced with the following pull request:
https://github.com/ARM-software/arm-trusted-firmware/pull/1193
Since the new coreboot support code supports the CBMEM console, we need
to always enable LOG_LEVEL INFO. Supporting platforms will parse the
coreboot table to conditionally enable the serial console only if it was
enabled in coreboot as well.
Also remove explicit cache flushes of some BL31 parameters. Turns out we
never really needed these because we already flush the whole cache when
disabling the MMU, and we were already not doing it for most parameters.
Change-Id: I3c52a536dc6067da1378b3f15c4a4d6cf0be7ce7
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/23558
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Correct whitespace issues in arch/arm and arch/arm64.
Enclose complex values in parenthesis.
Change-Id: I74b68f485adff1e6f0fa433e51e12b59ccea654b
Signed-off-by: Logan Carlson <logancarlson@google.com>
Reviewed-on: https://review.coreboot.org/19989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
coreboot and libpayload currently use completely different code to
perform a full cache flush on ARM64, with even different function names.
The libpayload code is closely inspired by the ARM32 version, so for the
sake of overall consistency let's sync coreboot to that. Also align a
few other cache management details to work the same way as the
corresponding ARM32 parts (such as only flushing but not invalidating
the data cache after loading a new stage, which may have a small
performance benefit).
Change-Id: I9e05b425eeeaa27a447b37f98c0928fed3f74340
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Submodule 3rdparty/arm-trusted-firmware 236c27d21f..3944adca59
This brings in 241 new commits from the upstream arm-trusted-firmware
repository, merged to the upstream tree between December 30, 2016 and
March 18, 2017.
3944adca Merge pull request #861 from soby-mathew/sm/aarch32_fixes
..
e0f083a0 fiptool: Prepare ground for expanding the set of images at
runtime
Also setup ATF builds so that unused functions don't break the build.
They're harmless and they don't filter for these like we do.
Change-Id: Ibf5bede79126bcbb62243808a2624d9517015920
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/18954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
They do 64bit accesses, and gcc does the necessary fix ups to handle
32bit values as zero-padded 64bit values.
clang, however, isn't happy with it.
Change-Id: I9c8b9fe3a1adc521e393c2e2a0216f7f425a2a3e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/19661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In builds without CONFIG_VBOOT_SEPARATE_VERSTAGE, verstage files are
linked directly into the bootblock or the romstage. However, they're
still compiled with a separate "libverstage" source file class, linked
into an intermediate library and then linked into the final destination
stage.
There is no obvious benefit to doing it this way and it's unclear why it
was chosen in the first place... there are, however, obvious
disadvantages: it can result in code that is used by both libverstage
and the host stage to occur twice in the output binary. It also means
that libverstage files have their separate compiler flags that are not
necessarily aligned with the host stage, which can lead to weird effects
like <rules.h> macros not being set the way you would expect. In fact,
VBOOT_STARTS_IN_ROMSTAGE configurations are currently broken on x86
because their libverstage code that gets compiled into the romstage sets
ENV_VERSTAGE, but CAR migration code expects all ENV_VERSTAGE code to
run pre-migration.
This patch resolves these problems by removing the separate library.
There is no more difference between the 'verstage' and 'libverstage'
classes, and the source files added to them are just treated the same
way a bootblock or romstage source files in configurations where the
verstage is linked into either of these respective stages (allowing for
the normal object code deduplication and causing those files to be
compiled with the same flags as the host stage's files).
Tested this whole series by booting a Kevin, an Elm (both with and
without SEPARATE_VERSTAGE) and a Falco in normal and recovery mode.
Change-Id: I6bb84a9bf1cd54f2e02ca1f665740a9c88d88df4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18302
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Due to an unfortunate race between adding verstage support and reverting
an earlier hack that disabled the optimized assembly versions of
memcpy(), memmove() and memset() on ARM64, it seems that we never
enabled the optimized code for the verstage. This should be fixed so
that all stages use the same architecture support code.
Change-Id: I0bf3245e346105492030f4b133729c4d11bdb3ff
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18976
Tested-by: build bot (Jenkins)
|
|
- Remove warnings about code using deprecated declarations such as:
plat/mediatek/mt8173/bl31_plat_setup.c: In function 'bl31_platform_setup':
plat/mediatek/mt8173/bl31_plat_setup.c:175:2: warning:
'arm_gic_setup' is deprecated [-Wdeprecated-declarations]
include/drivers/arm/arm_gic.h:44:6: note: declared here:
void arm_gic_setup(void) __deprecated;
- Disable pedantic warnings to get rid of these warnings:
In file included from plat/mediatek/mt8173/bl31_plat_setup.c:36:0:
plat/mediatek/mt8173/include/mcucfg.h:134:21: error:
enumerator value for 'MP1_CPUCFG_64BIT' is not an integer constant
expression [-Werror=pedantic]
MP1_CPUCFG_64BIT = 0xf << MP1_CPUCFG_64BIT_SHIFT
Change-Id: Ibf2c4972232b2ad743ba689825cfe8440d63e828
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17995
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We rely on gnu make, so we can expect the jobserver to be around in
parallel builds, too. Avoids some make warnings and slightly speeds up
the build if those sub-makes are executed (eg for arm-trusted-firmware
and vboot).
Change-Id: I0e6a77f2813f7453d53e88e0214ad8c1b8689042
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18263
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We have kconfig.h auto-included and it pulls config.h too.
Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17655
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
coreboot's build system picks up the BL31 image as an ELF from the ARM
Trusted Firmware submodule and inserts it into CBFS. However, the
generic 'bl31' build target we run in the ARM Trusted Firmware build
system also generates a raw bl31.bin binary file.
We don't need that binary, and with the recently added support for
multiple non-contiguous program segments in BL31 it can grow close to
4GB in size (by having one section mapped near the start and one near
the end of the address space). To avoid clogging up people's hard drives
with 4GB of zeroes, let's only build the target we actually need.
BRANCH=gru
BUG=chrome-os-partner:56314,chromium:661124
TEST=FEATURES=noclean emerge-kevin coreboot, confirm that there's no
giant build/3rdparty/arm-trusted-firmware/bl31.bin file left in the
build artifacts, and that we still generate .d prerequisite files.
Change-Id: I8e7bd50632f7831cc7b8bec69025822aec5bad27
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 31699820f4c36fd441a3e7271871af4e1474129f
Original-Change-Id: Iaa073ec11dabed7265620d370fcd01ea8c0c2056
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/407110
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17380
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Switch the BL31 (ARM Trusted Firmware) format to payload so that it can
have multiple independent segments. This also requires disabling the region
check since SRAM is currently faulted by that check.
This has been tested with Rockchip's pending change:
https://chromium-review.googlesource.com/#/c/368592/3
with the patch mentioned on the bug at #13.
BUG=chrome-os-partner:56314
BRANCH=none
TEST=boot on gru and see that BL31 loads and runs. Im not sure if it is
correct though:
CBFS: Locating 'fallback/payload'
CBFS: Found @ offset 1b440 size 15a75
Loading segment from ROM address 0x0000000000100000
code (compression=1)
New segment dstaddr 0x18104800 memsize 0x117fbe0 srcaddr 0x100038 filesize 0x15a3d
Loading segment from ROM address 0x000000000010001c
Entry Point 0x0000000018104800
Loading Segment: addr: 0x0000000018104800 memsz: 0x000000000117fbe0 filesz: 0x0000000000015a3d
lb: [0x0000000000300000, 0x0000000000320558)
Post relocation: addr: 0x0000000018104800 memsz: 0x000000000117fbe0 filesz: 0x0000000000015a3d
using LZMA
[ 0x18104800, 18137d90, 0x192843e0) <- 00100038
Clearing Segment: addr: 0x0000000018137d90 memsz: 0x000000000114c650
dest 0000000018104800, end 00000000192843e0, bouncebuffer ffffffffffffffff
Loaded segments
BS: BS_PAYLOAD_LOAD times (us): entry 0 run 125150 exit 1
Jumping to boot code at 0000000018104800(00000000f7eda000)
CPU0: stack: 00000000ff8ec000 - 00000000ff8f0000, lowest used address 00000000ff8ef3d0, stack used: 3120 bytes
CBFS: 'VBOOT' located CBFS at [402000:44cc00)
CBFS: Locating 'fallback/bl31'
CBFS: Found @ offset 10ec0 size 8d0c
Loading segment from ROM address 0x0000000000100000
code (compression=1)
New segment dstaddr 0x10000 memsize 0x40000 srcaddr 0x100054 filesize 0x8192
Loading segment from ROM address 0x000000000010001c
code (compression=1)
New segment dstaddr 0xff8d4000 memsize 0x1f50 srcaddr 0x1081e6 filesize 0xb26
Loading segment from ROM address 0x0000000000100038
Entry Point 0x0000000000010000
Loading Segment: addr: 0x0000000000010000 memsz: 0x0000000000040000 filesz: 0x0000000000008192
lb: [0x0000000000300000, 0x0000000000320558)
Post relocation: addr: 0x0000000000010000 memsz: 0x0000000000040000 filesz: 0x0000000000008192
using LZMA
[ 0x00010000, 00035708, 0x00050000) <- 00100054
Clearing Segment: addr: 0x0000000000035708 memsz: 0x000000000001a8f8
dest 0000000000010000, end 0000000000050000, bouncebuffer ffffffffffffffff
Loading Segment: addr: 0x00000000ff8d4000 memsz: 0x0000000000001f50 filesz: 0x0000000000000b26
lb: [0x0000000000300000, 0x0000000000320558)
Post relocation: addr: 0x00000000ff8d4000 memsz: 0x0000000000001f50 filesz: 0x0000000000000b26
using LZMA
[ 0xff8d4000, ff8d5f50, 0xff8d5f50) <- 001081e6
dest 00000000ff8d4000, end 00000000ff8d5f50, bouncebuffer ffffffffffffffff
Loaded segments
INFO: plat_rockchip_pmusram_prepare pmu: code d2bfe625,d2bfe625,80
INFO: plat_rockchip_pmusram_prepare pmu: code 0xff8d4000,0x50000,3364
INFO: plat_rockchip_pmusram_prepare: data 0xff8d4d28,0xff8d4d24,4648
NOTICE: BL31: v1.2(debug):
NOTICE: BL31: Built : Sun Sep 4 22:36:16 UTC 2016
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: plat_rockchip_pmu_init(1189): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x18104800
INFO: SPSR = 0x8
Change-Id: Ie2484d122a603f1c7b7082a1de3f240aa6e6d540
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8c1d75bff6e810a39776048ad9049ec0a9c5d94e
Original-Change-Id: I2d60e5762f8377e43835558f76a3928156acb26c
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/376849
Original-Commit-Ready: Simon Glass <sjg@google.com>
Original-Tested-by: Simon Glass <sjg@google.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16706
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Tidy up a few things which look incorrect in this file.
BUG=chrome-os-partner:56314
BRANCH=none
TEST=build for gru
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 434e9ceb5fce69b28de577cdc3541a439871f5ed
Original-Change-Id: Ida7a62ced953107c8e1723003bcb470c81de4c2f
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/376848
Original-Commit-Ready: Simon Glass <sjg@google.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: If8c283fe8513e6120de2fd52eab539096a4e0c9b
Reviewed-on: https://review.coreboot.org/16584
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ic1ca6c2e1cd06800d7eb2d00ac0b328987d022ef
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16434
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
|
|
Change-Id: I37dfa853c3dbe93a52f6c37941b17717e22f6430
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16277
Reviewed-by: Omar Pakker
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ibec78b25c0f330fc8517654761803e8abf203060
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16282
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some exceptions (like from calling a NULL function pointer) are easier
to narrow down with a dump of the call stack. Let's take a page out of
ARM32's book and add that feature to ARM64 as well. Also change the
output format to two register columns, to make it easier to fit a whole
exception dump on one screen.
Applying to both coreboot and libpayload and syncing the output format
between both back up.
Change-Id: I19768d13d8fa8adb84f0edda2af12f20508eb2db
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14931
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BRANCH=none
BUG=chrome-os-partner:51537
TEST=build pass
Change-Id: Id3dd3a553370eada1e79708dc71afc2d94d6ce93
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0949b0d9ec12eff7edb3d7de738833f29507c332
Original-Change-Id: I8052f86d4d846e5d544911c5b9e323285083fb5c
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/340024
Original-Commit-Ready: Vadim Bendebury <vbendeb@google.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://review.coreboot.org/14747
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It isn't used anymore.
Change-Id: Ie554d1dd87ae3f55547466e484c0864e55c9d102
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14567
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Utilize the architecture dependent coreboot table size value
from <arch/cbconfig.h>
Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14455
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Stefan and others have discussed their interest in only
including options in Kconfig that are directly associated
with building a coreboot image. There are variables that
are architecture dependent that are utilized in the
coreboot infrastructure. To meet that goal, introduce
<arch/cbconfig.h> header file which defines variables
for the coreboot infrastructure that are architecture
dependent but utilized in common infrastructure.
Change-Id: Ic4cb9e81bab042797539dce004db0f7ee8526ea6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14454
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
In order to de-duplicate common patterns implement one write_tables()
function. The new write_tables() replaces all the architecture-specific
ones that were largely copied. The callbacks are put in place to
handle any per-architecture requirements.
Change-Id: Id3d7abdce5b30f5557ccfe1dacff3c58c59f5e2b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14436
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a architecture specific function, arch_write_tables(), that
allows an architecture to add its required tables for booting.
This callback helps write_tables() to be de-duplicated.
Change-Id: I805c2f166b1e75942ad28b6e7e1982d64d2d5498
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14435
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
A architecture-specific function, named bootmem_arch_add_ranges(),
is added so that each architecture can add entries into the bootmem
memory map. This allows for a common write_tables() implementation
to avoid code duplication.
Change-Id: I834c82eae212869cad8bb02c7abcd9254d120735
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14434
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Each arch was calling cbmem_list() in their own write_tables()
function. Consolidate that call and place it in common code
in write_coreboot_table().
Change-Id: If0d4c84e0f8634e5cef6996b2be4a86cc83c95a9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14430
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of hard coding a #define in each architecture's
tables.c for the coreboot table size in cbmem use a Kconfig
varible. This aids in aligning on a common write_tables()
implementation instead of duplicating the code for each
architecture.
Change-Id: I09c0f56133606ea62e9a9c4c6b9828bc24dcc668
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14429
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to
statically allocate the different memory regions it needs and guarantees
at build time that there are no dangerous overlaps between them. At the
end of its (ramstage) execution, however, it usually loads a payload
(and possibly other platform-specific components) that is not integrated
into the coreboot build system and therefore cannot provide the same
overlap guarantees through memlayout.ld. This creates a dangerous memory
hazard where a new component could be loaded over memory areas that are
still in use by the code-loading ramstage and lead to arbitrary memory
corruption bugs.
This patch fills this gap in our build-time correctness guarantees by
adding the necessary checks as a new intermediate Makefile target on
route to assembling the final image. It will parse the memory footprint
information of the payload (and other platform-specific post-ramstage
components) from CBFS and compare it to a list of memory areas known to
be still in use during late ramstage, generating a build failure in case
of a possible hazard.
BUG=chrome-os-partner:48008
TEST=Built Oak while moving critical regions in the way of BL31 or the
payload, observing the desired build-time errors. Built Nyan, Jerry and
Falco without issues for good measure.
Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13949
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Only i386 has code to support bounce buffer. For others coreboot
would silently discard part of binary which doesn't work and is a hell to debug.
Instead just die.
Change-Id: I37ae24ea5d13aae95f9856a896700a0408747233
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13750
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add lb_arch_add_records() to allow the architecture code to
generically hook into the coreboot table generation.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=With all subsequent patches confirmed lb_arch_add_records() is
called when a strong symbol is provided.
Change-Id: I7c69c0ff0801392bbcf5aef586a48388b624afd4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13669
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Update ATF codebase to a version that supports passing a timestamp and
fix the format to what it accepts now (including quotes).
This provides reproducible builds.
Change-Id: I12a0a2ba1ee7921ad93a3a877ea50309136ab1ab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13726
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It is silly to have a single header to declare the main()
symbol, however some of the arches provided it while
lib/bootblock.c relied on the arch headers to declare it. Just
move the declaration into its own header file and utilize it.
Change-Id: I743b4c286956ae047c17fe46241b699feca73628
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13681
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
jmp_to_elf_entry() is not defined anywhere. Remove it.
Change-Id: I68f996a735f2ef3dd60cf69f9b72c3f1481cbb55
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It's no longer used. Remove it.
Change-Id: Id6f4084ab9d671e94f0eee76bf36fad9a174ef14
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13678
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The PSTATE mask bits for Debug exceptions, external Aborts, Interrupts
and Fast interrupts are usually best left unset: under normal
circumstances none of those exceptions should occur in firmware, and if
they do it's better to get a crash close to the code that caused it
(rather than much later when the kernel first unmasks them). For this
reason arm64_cpu_init unmasks them right after boot. However, the EL2
payload was still running with all mask bits set, which this patch
fixes.
BL31, on the other hand, explicitly wants to be entered with all masks
set (see calling convention in docs/firmware-design.md), which we had
previously not been doing. It doesn't seem to make a difference at the
moment, but since it's explicitly specified we should probably comply.
BRANCH=None
BUG=None
TEST=Booted Oak, confirmed with raw_read_daif() in payload that mask
bits are now cleared.
Change-Id: I04406da4c435ae7d44e2592c41f9807934bbc802
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ba55bc23fbde962d91c87dc0f982437572a69a8
Original-Change-Id: Ic5fbdd4e1cd7933c8b0c7c5fe72eac2022c9553c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325056
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13596
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On ARM64, the memory type for accessing page table descriptors during
address translation is governed by the Translation Control Register
(TCR). When the MMU code accesses the same descriptors to change page
mappings, it uses the standard memory type rules (defined by the page
table descriptor for the page that contains that table, or 'device' if
the MMU is off).
Accessing the same memory with different memory types can lead to all
kinds of fun and hard to debug effects. In particular, if the TCR says
"cacheable" and the page tables say "uncacheable", page table walks will
pull stale entries into the cache and later mmu_config_range() calls
will write directly to memory, bypassing those cache lines. This means
the translations will not get updated even after a TLB flush, and later
cache flushes/evictions may write the stale entries back to memory.
Since page table configuration is currently always done from SoC code,
we can't generally ensure that the TTB is always mapped as cacheable.
We can however save developers of future SoCs a lot of headaches and
time by spot checking the attributes when the MMU gets enabled, as this
patch does.
BRANCH=None
BUG=None
TEST=Booted Oak. Manually tested get_pte() with a few addresses.
Change-Id: I3afd29dece848c4b5f759ce2f00ca2b7433374da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f3947f4bb0abf4466006d5e3a962bbcb8919b12d
Original-Change-Id: I1008883e5ed4cc37d30cae5777a60287d3d01af0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323862
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13595
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If coreboot's build process is reproducible (eg. using the latest git
timestamp as source), bl31 is, too.
This requires an arm-trusted-firmware side merge first (in progress) and
an update of our reference commit for the submodule, but it also doesn't
hurt anything because it merely sets a variable that currently goes
unused.
Change-Id: If139538a2fab5b3a70c67f4625aa2596532308f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13497
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
There were several spots in the tree where the path to a per class
object file was hardcoded. To make use of the src-to-obj macro for
this, it had to be moved before the inclusion of subdirs. Which is
fine, as it doesn't have dependencies beside $(obj).
Tested by verifying that the resulting coreboot.rom files didn't change
for all of Jenkins' abuild configurations.
Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13180
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the coreboot license header, we want to use two paragraphs.
See the section 'Common License Header' in the coreboot wiki
for more details.
Change-Id: I4a43f3573364a17b5d7f63b1f83b8ae424981b18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13118
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add more code to verstage
[pg: split downstream commit into multiple commits]
Change-Id: I578a69a1e43aad8c90c3914efd09d556920f728e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12612
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of depending BOOTBLOCK_CONSOLE on a set of architectures,
allow the arch or platform to specify whether it can provide a C
environment. This simplifies the selection logic.
Change-Id: Ia3e41796d9aea197cee0a073acce63761823c3aa
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12871
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This just updates existing guard name comments on the header files
to match the actual #define name.
As a side effect, if there was no newline at the end of these files,
one was added.
Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These were all written as part of the coreboot project, so get
the standard coreboot license header.
Change-Id: I4fccc8055755816be64e9e1a185f1e6fcb2b89ae
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Now that only CBFS access is supported for finding resources
within the boot media the assets infrastructure can be removed.
Remove it.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
Change-Id: I383fd6579280cf9cfe5a18c2851baf74cad004e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12690
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We need mmu interfaces in these two stages for,
1. bootblock: to support mmu initialization in bootblock
2. romstage: to be able to add dram range to mmu table
BRANCH=none
BUG=none
TEST=build pass
Change-Id: I56dea5f958a48b875579f546ba17a5dd6eaf159c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cf72736bda2233f8e0bdd7a8ca3245f1d941ee86
Original-Change-Id: I1e27c0a0a878f7bc0ff8712bee640ec3fd8dbb8b
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292665
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12585
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BRANCH=none
BUG=none
TEST=build pass
Change-Id: Ia997ce97ad42234ab020af7bd007d57d7191ee86
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 604ac738e33fdfbaf093989ea13162c8506b9360
Original-Change-Id: I636a1a38d0f5af97926d4446f3edb91a359cce4c
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292551
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12584
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of having to remember to strip the quotes everywhere so that
string comparisons (of which there are a few) match up, do it right at
the beginning.
Fixes building the image with a .config where CONFIG_CBFS_PREFIX
contains quotes.
Change-Id: I4d63341cd9f0bc5e313883ef7b5ca6486190c124
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12578
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
This patch removes the old arm64/stage_entry.S code that was too
specific to the Tegra SoC boot flow, and replaces it with code that
hides the peculiarities of switching to a different CPU/arch in ramstage
in the Tegra SoC directories.
BRANCH=None
BUG=None
TEST=Built Ryu and Smaug. !!!UNTESTED!!!
Change-Id: Ib3a0448b30ac9c7132581464573efd5e86e03698
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12078
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch expands the existing ENV_<stage> macros in <rules.h> with a
set of ENV_<arch> macros which can be used to detect which architecture
the current compilation unit is built for. These are more consistent
than compiler-defined macros (like '#ifdef __arm__') and will make it
easier to write small, architecture-dependent differences in common code
(where we currently often use IS_ENABLED(CONFIG_ARCH_...), which is
technically incorrect in a world where every stage can run on a
different architecture, and merely kinda happened to work out for now).
Also remove a vestigal <arch/rules.h> from ARM64 which was no longer
used, and genericise ARM subarchitecture Makefiles a little to make
things like __COREBOOT_ARM_ARCH__ available from all file types
(including .ld).
BUG=None
TEST=Compiled Falco, Blaze, Jerry and Smaug.
Change-Id: Id51aeb290b5c215c653e42a51919d0838e28621f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12433
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The existing arm64 architecture code has been developed for the Tegra132
and Tegra210 SoCs, which only start their ARM64 cores in ramstage. It
interweaves the stage entry point with code that initializes a CPU (and
should not be run again if that CPU already ran a previous stage). It
also still contains some vestiges of SMP/secmon support (such as setting
up stacks in the BSS instead of using the stage-peristent one from
memlayout).
This patch splits those functions apart and makes the code layout
similar to how things work on ARM32. The default stage_entry() symbol is
a no-op wrapper that just calls main() for the current stage, for the
normal case where a stage ran on the same core as the last one. It can
be overridden by SoC code to support special cases like Tegra.
The CPU initialization code is split out into armv8/cpu.S (similar to
what arm_init_caches() does for ARM32) and called by the default
bootblock entry code. SoCs where a CPU starts up in a later stage can
call the same code from a stage_entry() override instead.
The Tegra132 and Tegra210 code is not touched by this patch to make it
easier to review and validate. A follow-up patch will bring those SoCs
in line with the model.
BRANCH=None
BUG=None
TEST=Booted Oak with a single mmu_init()/mmu_enable(). Built Ryu and
Smaug.
Change-Id: I28302a6ace47e8ab7a736e089f64922cef1a2f93
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12077
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When we first added ARM support to coreboot, it was clear that the
bootblock would need to do vastly different tasks than on x86, so we
moved its main logic under arch/. Now that we have several more
architectures, it turns out (as with so many things lately) that x86 is
really the odd one out, and all the others are trying to do pretty much
the same thing. This has already caused maintenance issues as the ARM32
bootblock developed and less-mature architectures were left behind with
old cruft.
This patch tries to address that problem by centralizing that logic
under lib/ for use by all architectures/SoCs that don't explicitly
opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option).
This works great out of the box for ARM32 and ARM64. It could probably
be easily applied to MIPS and RISCV as well, but I don't have any of
those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and
leave that for later cleanup.
BRANCH=None
BUG=None
TEST=Built Jerry and Falco, booted Oak.
Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In order to have a proper runtime-modifyable page table API (e.g. to
remap DRAM after it was intialized), we need to remove any external
bookkeeping kept in global variables (which do not persist across
stages) from the MMU code. This patch implements this in a similar way
as it has recently been done for ARM32 (marking free table slots with a
special sentinel value in the first PTE that cannot occur as part of a
normal page table).
Since this requires the page table buffer to be known at compile-time,
we have to remove the option of passing it to mmu_init() at runtime
(which I already kinda deprecated before). The existing Tegra chipsets
that still used it are switched to instead define it in memlayout in a
minimally invasive change. This might not be the best way to design this
overall (I think we should probably just throw the tables into SRAM like
on all other platforms), but I don't have a Tegra system to test so I'd
rather keep this change low impact and leave the major redesign for
later.
Also inlined some single-use one-liner functions in mmu.c that I felt
confused things more than they cleared up, and fixed an (apparently
harmless?) issue with forgetting to mask out the XN page attribute bit
when casting a table descriptor to a pointer.
BRANCH=None
BUG=None
TEST=Compiled Ryu and Smaug. Booted Oak.
Change-Id: Iad71f97f5ec4b1fc981dbc8ff1dc88d96c8ee55a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since, SMP support is removed for ARM64, there is no need for CPU
initialization to be performed via device-tree.
Change-Id: I0534e6a93c7dc8659859eac926d17432d10243aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11913
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove SMP
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: Ife24d53eed9b7a5a5d8c69a64d7a20a55a4163db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11909
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove spintable
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: I1f38b8d8b0952eee50cc64440bfd010b1dd0bff4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11908
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With the removal of secmon from coreboot there are no
power down operations required. As such remove the
A57 power down support.
Change-Id: I8eebb0ecd87b5e8bb3eaac335d652689d7f57796
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11898
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
For vboot1 there was an rmodule that was loaded and ran to
do the firmware verification. That's no longer used so remove
the last vestiges of VBOOT_STUB.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados.
Change-Id: I6b41544874bef4d84d0f548640114285cad3474e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Set XN bit of block upper attribute to device memory in mmu. CPU may
speculatively prefetch instructions from device memory, but the IO
subsystem of some implementation may not support this operation. Set
this attribute to device memory mmu entries can prevent CPU from
prefetching device memory.
BRANCH=none
BUG=none
TEST=build and booted to kernel on oak-rev3 with dcm enabled.
Change-Id: I52ac7d7c84220624aaf6a48d64b9110d7afeb293
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7b01a4157cb046a5e75ea7625060a602e7a63c3c
Original-Change-Id: Id535e990a23b6c89123b5a4e64d7ed21eebed607
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302301
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add an LDFLAGS_common variable and use that for each stage
during linking within all the architectures. All the architectures
support gc-sections, and as such they should be linking in the
same way.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi and analyzed the relocatable ramstage.
Change-Id: I41fbded54055455889b297b9e8738db4dda0aad0
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11522
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Bring rmodule linking into the common linking method.
The __rmodule_entry symbol was removed while using
a more common _start symbol. The rmodtool will honor
the entry point found within the ELF header. Add
ENV_RMODULE so that one can distinguish the environment
when generating linker scripts for rmodules. Lastly,
directly use program.ld for the rmodule.ld linker script.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi and analyzed the relocatable ramstage,
sipi_vector, and smm rmodules.
Change-Id: Iaa499eb229d8171272add9ee6d27cff75e7534ac
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11517
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
coreboot has no CREDITS file.
Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11514
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to prepare for more unification of the linker
scripts prefix pci_drivers, epci_drivers, cpu_drivers, and
ecpu_drivers with an underscore.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built different boards includes ones w/ and w/o relocatable
ramstage.
Change-Id: I8918b38db3b754332e8d8506b424f3c6b3e06af8
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11506
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The src/lib/timestamp.c already has an implementation using
timer_monotonic_get() for timestamp_get(). Use that instead
of duplicating the logic.
BUG=chrome-os-partner:44669
BRANCH=None
TEST=None
Change-Id: If17be86143f217445bd64d67ceee4355fa482d39
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11468
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This patch adds support to enable a linker workaround to a hardware
erratum on some early Cortex-A53 revisions. Since the linker option was
added very recently, we use xcompile to test whether the toolchain
supports it first. It is also guarded by a Kconfig since only a few
ARM64 SoCs will need this and it incurs a performance penalty.
BRANCH=none
BUG=none
TEST=Turned it on or off for Smaug and confirmed that it (dis)appeared
in verbose make output accordingly.
Change-Id: I01c9642d3cf489134645f0db6f79f1c788ddb00d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 57128785760c4dfa32d6e6d764756443a9323cb7
Original-Change-Id: Ia5dd124f484e38460d75fb864304e7e8b18d16b7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294745
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11403
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Fix following compilation error.
LINK cbfs/fallback/verstage.debug
/bin/sh: verstage-objs: command not found
/usr/x86_64-pc-linux-gnu/aarch64-cros-linux-gnu/binutils-bin/2.24/ld.bfd.real: warning: cannot find entry symbol stage_entry; defaulting to 00000000000d7000
BRANCH=chromeos-2015.07
BUG=none
TEST=emerge-oak coreboot
Change-Id: I30e4c43625b2d1d076f24e8c2639ce951839661b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2a8936cdf34d315f580819df682335b2998f044f
Original-Change-Id: I9afd57a5a868a348dff2c66cad0a8a09cdb2e911
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292557
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11402
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
do_dcsw_op is coded as a label, it's possible that linker will place
do_dcsw_op on unaligned address. To avoid this situation, we declare
do_dcsw_op as a function. Also explicitly set the 2nd argument of
ENTRY_WITH_ALIGN(name, bits) to 2.
do_dcsw_op:
cbz x3, exit
c103d: b40003e3 cbz x3, c10b9 <exit>
mov x10, xzr
c1041: aa1f03ea mov x10, xzr
adr x14, dcsw_loop_table // compute inner loop address
BRANCH=none
BUG=none
TEST=build and check do_dcsw_op in elf file
Change-Id: Ieb5f4188d6126ac9f6ddb0bfcc67452f79de94ad
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 4ee26b76089fab82cf4fb9b21c9f15b29e57b453
Original-Change-Id: Id331e8ecab7ea8782e97c10b13e8810955747a51
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/11395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We've seen an increasing need to reduce stack sizes more and more for
space reasons, and it's always guesswork because no one has a good idea
how little is too litte. We now have boards with 3K and 2K stacks, and
old pieces of common code often allocate large temporary buffers that
would lead to very dangerous and hard to detect bugs when someone
eventually tries to use them on one of those.
This patch tries improve this situation at least a bit by declaring 2K
as the minimum stack size all of coreboot code should work with. It
checks all function frames with -Wstack-usage=1536 to make sure we don't
allocate more than 1.5K in a single buffer. This is of course not a
perfect test, but it should catch the most common situation of declaring
a single, large buffer in some close-to-leaf function (with the
assumption that 0.5K is hopefully enough for all the "normal" functions
above that).
Change one example where we were a bit overzealous and put a 1K buffer
into BSS back to stack allocation, since it actually conforms to this
new assumption and frees up another kilobyte of that highly sought-after
verstage space. Not touching x86 with any of this since it's lack of
__PRE_RAM__ BSS often requires it to allocate way more on the stack than
would usually be considered sane.
BRANCH=veyron
BUG=None
TEST=Compiled Cosmos, Daisy, Falco, Blaze, Pit, Storm, Urara and Pinky,
made sure they still build as well as before and don't show any stack
usage warnings.
Change-Id: Idc53d33bd8487bbef49d3ecd751914b0308006ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e5931066575e256dfc2295c3dab7f0e1b65417f
Original-Change-Id: I30bd9c2c77e0e0623df89b9e5bb43ed29506be98
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236978
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Even if DEBUG=0, BL31 puts NOTICE(..) messages on serial console. Set
LOG_LEVEL=0 if coreboot does not use serial.
BUG=None
BRANCH=None
TEST=Compiles successfully and no console output from bl31 for
production images.
Change-Id: Ie77bcac3e2a0d314545b6811327c413536c77fb9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8e3bcbf6249c80850a87dd66f34d3ff36158641
Original-Change-Id: I1415a3816cd2fa9dd05bcbd36ac0abc3f2759960
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286150
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11014
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
This allows SoCs/CPUs to have custom stage_entry in order to apply any
fixups that need to run before standard cpu reset procedure.
BUG=chrome-os-partner:41877
BRANCH=None
TEST=Compiles successfully
Change-Id: Iaae7636349140664b19e81b0082017b63b13f45b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 498d04b0e9a3394943f03cad603c30ae8b3805d4
Original-Change-Id: I9a005502d4cfcb76017dcae3a655efc0c8814a93
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284867
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10897
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:41877
BRANCH=None
TEST=Compiles successfully
Change-Id: I8a94176a3faacb25ae5e9eaeaac4011ddf5af6a1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 802cba6f28a4e683256e8ce9fb6395acecdc9397
Original-Change-Id: I3a5983d4a40466bc0aa8ab3bd8430ab6cdd093cc
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284868
Original-Reviewed-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10898
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kconfigs symbols of type bool are always defined, and can be tested with
the IS_ENABLED() macro.
symbol type except string.
Change-Id: Ic4ba79f519ee2a53d39c10859bbfa9c32015b19d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully, sp verified during exception
Change-Id: Idbeb93b1dbf163e2d86cd42369941ff98a3d2d9e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca73b40f0248497143b6ab42bd0f5cc6cddf7713
Original-Change-Id: I38ee403200acb0e3d9015231c274568930b58987
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283542
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10842
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The arm-trusted-firmware build system may not create the final bl31.elf file
atomically, confusing our make to try to use it before it's ready.
Hence insert a (hopefully, but not guaranteed to be atomic) file move.
Change-Id: Iffc80467e0f4bbc96fc62414d4abfaa7b42634f4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10700
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Compilers aren't happy with a declaration of boot_cpu() after defining
boot_cpu to 1.
Change-Id: I22d0db61646f3e226e5996fa94223ffbb6b760e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10696
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:40713
BRANCH=None
TEST=Compiles successfully with and without SECURE_OS config selected
Change-Id: I93e9726712a1992f1788d60891d5f6917bba3767
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 535ac9ffd1199b047734da0a9ee257d468b3fbb1
Original-Change-Id: Ic70a0b57816a5f3af548edafd82ba3783825a174
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/274416
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10694
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add support for loading secure os and pass its entrypoint as bl32 params
to bl31 stage.
BUG=chrome-os-partner:40713
BRANCH=None
TEST=Compiles successfully and loads secure os
Change-Id: I1409ccb7344c1d1b1ddc2b321fdae1beea2f823d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d3dc19025ff11c1e0590306230df7654ef9ad086
Original-Change-Id: Iafd540bf2906d10b5ee009e96179121fecbf5e11
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/273719
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10693
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This reverts commit 00263d0d8ee23bbe60ea359ea9cb33d551688980
to reintroduce optimized string handling functions.
BUG=chrome-os-partner:41185
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt on Smaug
Change-Id: I47f8d8afa5c9ff3fca67d4d0f393336fef03402b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eeb38afea828a2727d815e4fb5762cfdd09a2b3a
Original-Change-Id: Id053cbcea8b5e7ae29bdd6bb8b6f5e5011c42b00
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/275865
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10564
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The EARLY_CONSOLE Kconfig symbol was removed in
commit 48713a1b - console: Drop EARLY_CONSOLE option
The arm64 and mips directories don't even have early_console.c
to include.
Change-Id: Idc60ffb2bac2b180f4fdd0adf5c411e1f692a846
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10615
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This CL is in preparing for tegra mtc that is invoked by dev init.
mtc currently requires floating point instructions support.
BUG=chrome-os-partner:40999
BRANCH=none
TEST=Build and boot smaug
Change-Id: I470dfcd86026812d617f9ff4f4fcdce601195857
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e3f7336fc7cedf96dab4eff204616519856f831
Original-Change-Id: I14c0003ce76ddf4b4ebb0cf171ea3c62cab55ef9
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/275112
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10558
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Squashed and adjusted two changes from chromium.git. Covers
CBMEM init for ROMTAGE and RAMSTAGE.
cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API
There are several use cases for performing a certain task when CBMEM is
first set up (usually to migrate some data into it that was previously
kept in BSS/SRAM/hammerspace), and unfortunately we handle each of them
differently: timestamp migration is called explicitly from
cbmem_initialize(), certain x86-chipset-specific tasks use the
CAR_MIGRATION() macro to register a hook, and the CBMEM console is
migrated through a direct call from romstage (on non-x86 and SandyBridge
boards).
This patch decouples the CAR_MIGRATION() hook mechanism from
cache-as-RAM and rechristens it to CBMEM_INIT_HOOK(), which is a clearer
description of what it really does. All of the above use cases are
ported to this new, consistent model, allowing us to have one less line
of boilerplate in non-CAR romstages.
BRANCH=None
BUG=None
TEST=Built and booted on Nyan_Blaze and Falco with and without
CONFIG_CBMEM_CONSOLE. Confirmed that 'cbmem -c' shows the full log after
boot (and the resume log after S3 resume on Falco). Compiled for Parrot,
Stout and Lumpy.
Original-Change-Id: I1681b372664f5a1f15c3733cbd32b9b11f55f8ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/232612
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
cbmem: Extend hooks to ramstage, fix timestamp synching
Commit 7dd5bbd71 (cbmem: Unify random on-CBMEM-init tasks under common
CBMEM_INIT_HOOK() API) inadvertently broke ramstage timestamps since
timestamp_sync() was no longer called there. Oops.
This patch fixes the issue by extending the CBMEM_INIT_HOOK() mechanism
to the cbmem_initialize() call in ramstage. The macro is split into
explicit ROMSTAGE_/RAMSTAGE_ versions to make the behavior as clear as
possible and prevent surprises (although just using a single macro and
relying on the Makefiles to link an object into all appropriate stages
would also work).
This allows us to get rid of the explicit cbmemc_reinit() in ramstage
(which I somehow accounted for in the last patch without realizing that
timestamps work exactly the same way...), and replace the older and less
flexible cbmem_arch_init() mechanism.
Also added a size assertion for the pre-RAM CBMEM console to memlayout
that could prevent a very unlikely buffer overflow I just noticed.
BRANCH=None
BUG=None
TEST=Booted on Pinky and Falco, confirmed that ramstage timestamps once
again show up. Compile-tested for Rambi and Samus.
Original-Change-Id: If907266c3f20dc3d599b5c968ea5b39fe5c00e9c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/233533
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1be89bafacfe85cba63426e2d91f5d8d4caa1800
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7878
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As there can be more than one source of firmware assets this
patch generalizes the notion of locating a particular asset.
struct asset is added along with some helper functions for
working on assets as a first class citizen.
Change-Id: I2ce575d1e5259aed4c34c3dcfd438abe9db1d7b9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10264
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BRANCH=none
BUG=none
TEST=Booted on Oak and confirmed the output cacheable/non-cacheable
string is correct.
Change-Id: I062c1cc384b8cb9d07038399b1bc7ef47d992103
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 45552f95b55cd9fc81817e4ff02c78e885377065
Original-Change-Id: Ie52066dbefd2f54d0746792b89f0b57767811adb
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/273994
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/10390
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We have observed issues with enabling CONFIG_SMP and adding prints
before MMU is enabled on Tegra-based SoCs. This seems to be related
to the hardware assisted locks and the restrictions laid down by ARMv8
spec.
BUG=None
BRANCH=None
TEST=Boots to kernel prompt on smaug.
Change-Id: I29a52f5a972baf396c01faba3ae3e5ecd27563e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f52ee4b5b2e9b7f54eee0d105cb7e17f9a7e1613
Original-Change-Id: I432895560f468903c7beef00e78b6d38275a619c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272449
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10311
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current arm64 MMU interface is difficult to use in pre-RAM
environments. It is based on the memranges API which makes use of
malloc(), and early stages usually don't have a heap. It is also built
as a one-shot interface that requires all memory ranges to be laid out
beforehand, which is a problem when existing areas need to change (e.g.
after initializing DRAM).
The long-term goal of this patch is to completely switch to a
configure-as-you-go interface based on the mmu_config_range() function,
similar to what ARM32 does. As a first step this feature is added
side-by-side to the existing interface so that existing SoC
implementations continue to work and can be slowly ported over one by
one. Like the ARM32 version it does not garbage collect page tables that
become unused, so repeated mapping at different granularities will
exhaust the available table space (this is presumed to be a reasonable
limitation for a firmware environment and keeps the code much simpler).
Also do some cleanup, align comments between coreboot and libpayload for
easier diffing, and change all error cases to assert()s. Right now the
code just propagates error codes up the stack until it eventually
reaches a function that doesn't check them anymore. MMU configuration
errors (essentially just misaligned requests and running out of table
space) should always be compile-time programming errors, so failing hard
and fast seems like the best way to deal with them.
BRANCH=None
BUG=None
TEST=Compile-tested rush_ryu. Booted on Oak and hacked MMU init to use
mmu_config_range() insted of memranges. Confirmed that CRCs over all page
tables before and after the change are equal.
Change-Id: I93585b44a277c1d96d31ee9c3dd2522b5e10085b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f10fcba107aba1f3ea239471cb5a4f9239809539
Original-Change-Id: I6a2a11e3b94e6ae9e1553871f0cccd3b556b3e65
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/271991
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10304
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This function is required to be implemented by SoC only if some
platform specific parameters are to be passed in from the early
bootloader to bl31 component.
BUG=chrome-os-partner:40414
BRANCH=None
TEST=Compiles successfully.
Change-Id: I6e76a0b6735267971e12aa72a987e8d83f5ad102
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ab8bc12ffc2ee5bf69cef68bae852dcbf7ccb98
Original-Change-Id: If55aaee8d18a8045a5d842145c0e2c97a37a8bca
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272377
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10308
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Each SoC should have a BL31_MAKEARGS += ... defining all the make
arguments required for bl31 component compilation.
BUG=chrome-os-partner:40414
BRANCH=None
TEST=Compiles successfully and boots into bl31.
Change-Id: I20383ab61d012f7294d969f196044a5f1c07dfc1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 72bd297994248a9d96acc6f21d06bb6ff0d5292c
Original-Change-Id: I1ddd5c38e9214021d857d9d586310e23fa4114e0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272430
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10309
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=chrome-os-partner:40414
BRANCH=None
TEST=ATF compilation successful
Change-Id: Ib4eeced911181f756bd47c19eeb2d196ab5a0a2f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3061a219c24294a9fec4f26fc60b02f67bb55d66
Original-Change-Id: I39849d4048d7333eeab9bd698b4fd496181081a2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272374
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10307
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Intermediate linking may distort linker behavior (in particular related to
weak symbols). The idea is that archives are closer to 'just a list of
object files', and ideally makes the linker more predictable.
Using --whole-archive, the linker doesn't optimize out object files just
because their symbols were already provided by weak versions. However it
shouldn't be used for libgcc, because that one has some unexpected side-effects.
Change-Id: Ie226c198a93bcdca2d82c02431c72108a1c6ea60
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10139
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The configuration of SPSR bits that mask processor exceptions is kinda
oddly hidden as an implict part of the transition() function right now.
It would be odd but not impossible for programs to want to be entered
with enabled exceptions, so let's move these bits to be explicitly set
by the caller like the rest of SPSR instead.
Also clear up some macro names. The SPSR[I] bit is currently defined as
SPSR_IRQ_ENABLE, which is particularly unfortunate since that bit
actually *disables* (masks) interrupts. The fact that there is an
additional SPSR_IRQ_MASK definition with the same value but a different
purpose doesn't really help. There's rarely a point to have all three of
xxx_SHIFT, xxx_MASK and xxx_VALUE macros for single-bit fields, so
simplify this to a single definition per bit. (Other macros in
lib_helpers.h should probably also be overhauled to conform, but I want
to wait and see how many of them really stay relevant after upcoming
changes first.)
BRANCH=None
BUG=None
TEST=None
Change-Id: Id126f70d365467e43b7f493c341542247e5026d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 715600c83aef9794d1674e8c3b62469bdc57f297
Original-Change-Id: I3edc4ee276feb8610a636ec7b4175706505d58bd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270785
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10250
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds support for integrating the runtime-resident component
of ARM Trusted Firmware (github.com/ARM-software/arm-trusted-firmware)
called BL31. It expects the ARM TF source tree to be checked out under
$(top)/3rdparty/arm-trusted-firmware, which will be set up in a later
patch.
Also include optional support for VBOOT2 verification (pretty hacky for
now, since CBFSv1 is just around the corner and will make all this so
much better).
BRANCH=None
BUG=None
TEST=Booted Oak with ARM TF and working PSCI (with additional platform
patches).
Change-Id: I8c923226135bdf88a9a30a7f5ff163510c35608d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a1b3b2d56b25bfc1f3b2d19bf7876205075a987a
Original-Change-Id: I0714cc10b5b10779af53ecbe711ceeb89fb30da2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10249
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
