summaryrefslogtreecommitdiff
path: root/src/acpi
AgeCommit message (Collapse)Author
2020-07-02acpi_device: Replace polarity with active_low in acpi_gpio for GpioIoFurquan Shaikh
As per ACPI spec, GpioIo does not have any polarity associated with it. Linux kernel uses `active_low` argument within GPIO _DSD property to allow BIOS to indicate if the corresponding GPIO should be treated as active low. Thus, if GPIO has active high polarity or if it does not have any polarity associated with it, then the `active_low` argument is supposed to be set to 0. Having a `polarity` field in acpi_gpio seems confusing because GPIOs might not always have polarity associated with them. Example, in case of DMIC-select GPIO where 0 means select DMIC0 and 1 means select DMIC1, there is no polarity associated with the GPIO. Thus, it would be clearer for mainboard to use macros without having to specify a particular polarity. In order to enable mainboards to provide GPIO information without polarity for GpioIo usage, this change also adds `ACPI_GPIO_OUTPUT` and `ACPI_GPIO_INPUT` macros. BUG=b:157603026 Change-Id: I39d2a6ac8f149a74afeb915812fece86c9b9ad93 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01acpi: Avoid freeing a device twiceSimon Glass
The current implementation of acpi_dp_write() frees the node after it has written it. If the structure contains a ACPI_DP_TYPE_CHILD then a recursive call to acpi_dp_write() frees the child and then frees it again when returning from the call. This results in a double free. Split the implementation into two steps, one that ones and one that frees. This is easier to understand and fixes the bug. Note: This likely has no effect in coreboot since it doesn't seem to have a proper free() implementation. But it might gain one one day. BUG=none Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: Ife3917af10bc35a3c3eee38d8292f927ef15409d Reviewed-on: https://review.coreboot.org/c/coreboot/+/42892 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24ACPI: Replace smm_setup_structures()Kyösti Mälkki
Except for whitespace and varying casts the codes were the same when implemented. Platforms that did not implement this are tagged with ACPI_NO_SMI_GNVS. Change-Id: I31ec85ebce03d0d472403806969f863e4ca03b6b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-24ACPI: Add framework for GNVS initialisationKyösti Mälkki
Provide common initialisation point for setting up GNVS structure before first SMI is triggered. Change-Id: Iccad533c3824d70f6cbae52cc8dd79f142ece944 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42423 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10ACPI: Remove Kconfig COMMON_FADTKyösti Mälkki
Also remove default mb/*/fadt.c from Makefiles. Change-Id: I6a2839c524f8311ec9a382a84066afc7d579eaca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41948 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-09ACPI: Move redundant FADT reserved entryKyösti Mälkki
Change-Id: I35f66cdad6b8bedf4337aa8e5af7b0f1b53fe674 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42033 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-07acpi: Rename motherboard_fill_fadt() to mainboard_fill_fadt()Kyösti Mälkki
The prefix mainboard_ was used everywhere else. Change-Id: Ie576fd47301aa484cb1396e0c6f7260b7698af4d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-07acpi,soc/intel: Make soc/motherboard_fill_fadt() globalKyösti Mälkki
Change-Id: Iad7e7af802212d5445aed8bb08a55fd6c044d5bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41916 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-04acpi: Add support for writing UART device descriptorsDuncan Laurie
This change adds support for generating the device descriptor that corresponds to the UARTSerialBusV2() ACPI macro. The resulting ACPI code for ACPI_UART_RAW_DEVICE(115200, 64) is: UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne, 0x00, LittleEndian, ParityTypeNone, FlowControlNone, 0x0040, 0x0040, "\\_SB.PCI0.UAR2", 0x00, ResourceConsumer, , Exclusive) Change-Id: I671ce2a499d74717d8677528c46ab3fbc1d7faf5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-04acpi: Accomodate non-standard UUIDs in device propertiesDuncan Laurie
There have been changes to the way device properties are supported in Linux[1] and Windows[2] which add flexibilty: - non-standard UUIDs can be used instead of only ACPI_DP_UUID - support for multiple different packages within the _DSD that associate different properties with unique UUIDs. To handle this I extracted the part that does the write of UUID and properties to a separate function and defined a new PACKAGE type which has the custom UUID as a name and can be used the same way that child properties are today. For example a PCIe root port for a USB4 port has a standard property indicating the USB4 reference, and then two custom properties which are defined for different attributes. Example code: /* Create property table */ acpi_dp *dsd = acpi_dp_new_table("_DSD"); acpi_dp_add_reference(dsd, "usb4-port", usb4_path); /* Add package for hotplug */ acpi_dp *pkg = acpi_dp_new_table("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"); acpi_dp_add_integer(pkg, "HotPlugSupportInD3", 1); acpi_dp_add_package(dsd, pkg); /* Add package for external port info */ pkg = acpi_dp_new_table("efcc06cc-73ac-4bc3-bff0-76143807c389"); acpi_dp_add_integer(pkg, "ExternalFacingPort", 1); acpi_dp_add_package(dsd, pkg); /* Write all properties */ acpi_dp_write(dsd); Resulting ACPI: Scope (\_SB.PCI0.TRP0) { Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package () { Package () { "usb4-port", \_SB.PCI0.TDM0.RHUB.PRTA } }, ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () { "HotPlugSupportInD3", One } }, ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"), Package () { Package () { "ExternalFacingPort", One }, } }) } [1] https://patchwork.kernel.org/patch/10599675/ [2] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports Change-Id: I75f47825bf4ffc5e9e92af2c45790d1b5945576e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03acpigen: Add some new helper functionsDuncan Laurie
These build on existing functions but use different object types in order to provide functions for upcoming changes: acpigen_write_return_op(): Return an operator. acpigen_write_if_lequal_op_op(): Check if 2 operands are equal. acpigen_get_package_op_element(): Read an element from a package into an operator. This one just provides the missing helper, the other 3 already exist: acpigen_get_tx_gpio: Read TX gpio state. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I1141fd132d6f09cf482f74e95308947cba2c5846 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41985 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28acpi: Add new file for implementing Type-C Connector classTim Wawrzynczak
The USB Type-C Connector Class in the Linux kernel is not specific to the ChromeOS EC, so this functionality is now split out into a separate file, acpigen_usb.c. Documentation about the kernel side is available at https://www.kernel.org/doc/html/latest/driver-api/usb/typec.html. Change-Id: Ife5b8b517b261e7c0068c862ea65039c20382c5a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41539 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21acpi/device: Add a helper function to write SoundWire _ADRDuncan Laurie
This change adds a help function to write a SoundWire ACPI address object that conforms to the SoundWire DisCo Specification Version 1.0 The SoundWire address structure is defined in include/device/soundwire.h and provides the properties that are used to form the _ADR object. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I6efbf52ce20b53f96d69efe2bf004b98dbe06552 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40885 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21acpi/soundwire: Add functions to generate SoundWire propertiesDuncan Laurie
This change uses the previously added SoundWire definitions to provide functions that generate ACPI Device Properties for SoundWire controllers and codecs. A SoundWire controller driver should populate `struct soundwire_controller` and pass it to soundwire_gen_controller(). This will add all of the defined master links provided by the controller. A SoundWire codec driver should populate the necessary members in struct soundwire_codec and pass it to soundwire_gen_codec(). Several properties are optional and depend on whether the codec itself supports certain features and behaviors. The goal of this interface is to handle all of the properties defined in the SoundWire Discovery and Configuration Specification Version 1.0 so that controller and codec drivers do not need to all have code for writing standard properties. Both of these functions also provide a callback method for adding custom properties that are not defined by the SoundWire DisCo Specification. These properties may be required by OS drivers but are outside of the scope of the SoundWire specification itself. This code is tested with controller, codec, and mainboard implementations in subsequent commits. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ib185eaacf3c4914087497ed65479a772c155502b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-15acpigen_ps2_keybd: Add keymap for Power keyRajat Jain
Power key is a special non-matrixed key. Chrome /powerd only listens to the keyboard device for this key, so add its keymap. BUG=b:155941390 TEST=Test that power key generates KEY_POWER in linux evtest Change-Id: I570602d9febcb5c17e58761f2004ee88be16c27f Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Update sata files to be more aligned with rest of acpi filesFurquan Shaikh
This change moves sata.h to include/acpi/acpi_sata.h to align with the rest of the acpi header files in include/acpi. BUG=b:155428745 Change-Id: I3f97e5c12535a331d7347c0ecad00b07b5f13f37 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02acpi: Remove acpi_ from filenamesFurquan Shaikh
This change drops acpi_ prefix from filenames under src/acpi/. BUG=b:155428745 Change-Id: Iadda2b848701367e51f4f74706154f7e36a87df6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Reorganize ACPI configsFurquan Shaikh
In order to the Kconfigs in the same directory where the corresponding code lives, this change moves ACPI_BERT to arch/x86/Kconfig and following configs to acpi/Kconfig: ACPI_CPU_STRING ACPI_HAVE_PCAT_8259 ACPI_NO_PCAT_8259 HAVE_ACPI_TABLES BUG=b:155428745 Change-Id: I289565f38e46bd106ff89685aaf8f57e53d9827a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40932 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (5/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 5/5 which moves the addition of ACPI table related files from arch/x86/Makefile.inc to acpi/Makefile.inc. BUG=b:155428745 Change-Id: I8143fd37357aeb0561516450adddc6714d539ada Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Move ACPI table support out of arch/x86 (1/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 1/5 which moves .c files from arch/x86 to acpi/. The only acpi files that are still retained under arch/x86 are: a. acpi_s3.c: This doesn't really deal with ACPI tables. Also, there are some assumptions in there about SMM which will have to be resolved if this file needs to be moved to common code. b. acpi_bert_storage.c/bert_storage.h: This file is currently written specifically with x86 in mind. So, not moving the file for now. Motivation for this change: Not all stages on Picasso SoC are targeted for the same architecture. For example, verstage (if runs before bootblock) will be targeted for non-x86. This makes it difficult to add device tree to verstage which would be required to get to SoC configs from the tree. This is because the device tree on x86 platforms currently contains a lot of devices that require ACPI related enums and structs (like acpi_gpio, acpi_pld, acpi_dp and so on). Hence, this change removes all ACPI table support out of arch/x86. BUG=b:155428745 Change-Id: Icc6b793c52c86483a8c52e0555619e36869a869e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-02src/acpi: Drop Kconfig option ACPI_SATA_GENERATORFurquan Shaikh
ACPI_SATA_GENERATOR is currently used to include sata.c in ramstage. However, there is no need to guard this inclusion using a separate Kconfig. All other files that deal with ACPI tables are included based on the state of HAVE_ACPI_TABLES. This change includes sata.c in ramstage if HAVE_ACPI_TABLES is selected. If the ACPI function isn't used, linker will optimize it out. BUG=b:155428745 Change-Id: I9a319cfe7c3f973b15ccbd0f13bd1ed07571a398 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-01-02src/acpi: Update license headers to SPDXMartin Roth
While I was working on updating the headers to move copyrights into the AUTHORS file, I got a request to switch to SPDX headers as well. Linux has moved completely to SPDX headers, which are easier to maintain, have good definitions, are very short, and can be checked automatically. This is completely unlike our current header situation. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie86d34f7fa7bf7434ad8a38aa1eadcfece7124b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-07-30AUTHORS: Move src/acpi copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Id3382d19088cba2703350339b0bd0cfb3c0e63b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-10arch/x86: Add common AMD ACPI hardware definitionsMarshall Dawson
Match the corresonding Intel definitions for the ACPI register definitions. Change-Id: Ib804f4544d04fe08fefa493d75e0375de7cf9348 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-01src/acpi: Add guards on all header filesMartin Roth
Change-Id: I1b2d82a85194df6660bc041af8a690acc5469d02 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-07-31src/acpi: Capitalize ACPI and SATAElyes HAOUAS
Change-Id: I7a4f1bd5c9e3c8152ebdd9118adddbc526d03a53 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15959 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-15arch/x86: provide common Intel ACPI hardware definitionsAaron Durbin
In the ACPI specification the PM1 register locations are well defined, but the sleep type values are hardware specific. That said, the Intel chipsets have been consistent with the values they use. Therefore, provide those hardware definitions as well a helper function for translating the hardware values to the more high level ACPI sleep values. BUG=chrome-os-partner:54977 Change-Id: Iaeda082e362de5d440256d05e6885b3388ffbe43 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15666 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-01-14acpi/: add missing license headerMartin Roth
These were mostly written as part of the coreboot project, so get the standard coreboot license header. Change-Id: Ief13339647d3172e65bb18e6dcb54312a5c9472e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12917 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-06-07acpi/sata: add generic sata ssdt port generatorAlexander Couzens
generate_sata_ssdt_ports() generates ports based on sata enable map Change-Id: Ie68e19c93f093d6c61634c4adfde484b88f28a77 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9708 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Peter Stuge <peter@stuge.se>