summaryrefslogtreecommitdiff
path: root/payloads
AgeCommit message (Collapse)Author
2019-08-27libpayload/usb: add USB 3.1 GEN2 supportEric Lai
USB 3.1 GEN2 report speed type 4, add into speed enum. BUG=b:139787920 BRANCH=N/A TEST=Build libpayload and depthcharge on sarien and boot with USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22libpayload: usbmsc: Factor out usb_msc_force_init() functionJulius Werner
We're planning to have a use case with a custom USB device that implements the USB mass storage protocol on its bulk endpoints, but does not have the normal MSC class/protocol interface descriptors and does not support class-specific control requests (Get Max LUN and Bulk-Only Reset). We'd like to identify/enumerate the device via usb_generic_create() in our payload but then reuse all the normal MSC driver code. In order to make that possible, this patch factors a new usb_msc_force_init() function out of usb_msc_init() which will initialize an MSC device without checking its descriptors. It also adds some "quirks" flags that allow devices registered this way to customize behavior of the MSC stack. Change-Id: I50392128409cb2a879954f234149a5e3b060a229 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-22libpayload: usbmsc: Skip zero-length packets at end of dataJulius Werner
Some broken USB mass storage devices send another zero-length packet at the end of the data part of a transfer if the amount of data was evenly divisible by the packet size (which is pretty much always the case for block reads). This packet will get interpreted as the CSW and screw up the MSC state machine. This patch works around this issue by retrying the CSW transfer when it was received as exactly 0 bytes. This is the same mitigation the Linux kernel uses and harmless for correctly behaving devices. Also tighten validation of the CSW a little, making sure we verify the length before we read any fields and checking the signature in addition to the tag. Change-Id: I24f183f27b2c4f0142ba6c4b35b490c5798d0d21 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34485 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22Add buffer_to/from_fifo32(_prefix) helpersJulius Werner
Many peripheral drivers across different SoCs regularly face the same task of piping a transfer buffer into (or reading it out of) a 32-bit FIFO register. Sometimes it's just one register, sometimes a whole array of registers. Sometimes you actually transfer 4 bytes per register read/write, sometimes only 2 (or even 1). Sometimes writes need to be prefixed with one or two command bytes which makes the actual payload buffer "misaligned" in relation to the FIFO and requires a bunch of tricky bit packing logic to get right. Most of the times transfer lengths are not guaranteed to be divisible by 4, which also requires a bunch of logic to treat the potential unaligned end of the transfer correctly. We have a dozen different implementations of this same pattern across coreboot. This patch introduces a new family of helper functions that aims to solve all these use cases once and for all (*fingers crossed*). Change-Id: Ia71f66c1cee530afa4c77c46a838b4de646ffcfb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-21payloads/tianocore: Enable UEFIPayloadLijian Zhao
corebootpayload package in upstream TianoCore was replaced with UEFIPayload, add external payload build option for UEFIPayload. BUG=N/A TEST=Select TianoCore payload as UEFIPayload, build and able to boot up on QEMU q35 after PCIE_BASE set. Change-Id: I0b7785fde9f4113b2cd91323ac0358b229c5a6e6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34459 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20Makefile.inc, payloads: Enable -WvlaJacob Garber
Variable length arrays are dangerous, so let's make sure they don't sneak back into coreboot or any of the payloads. Change-Id: Idf2488cf0efab51c9569a3789ae953368b61880c Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33846 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08arch/riscv: Enable FIT supportJonathan Neuschäfer
Tested on qemu-riscv. Depends on OpenSBI integration and proper memory detection in qemu. Boots into Linux until initrd should be loaded. Tested on SiFive/unleashed: Boots into Linux until earlycon terminates. Change-Id: I5ebc6cc2cc9e328f36d70fba13555386bb8c29d6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30292 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08libpayload: cbgfx: Allow rotation of the displayNicolas Boichat
Sometimes the display native orientation does not match the device default orientation, so allow rotation of the framebuffer before it is displayed on screen. set_pixel now take coordinates in the rotated coordinate system, and converts the coordinates before writing to the framebuffer. Also, screen.size now matches the rotated system (_not_ the framebuffer size). BUG=b:132049716 TEST=Boot krane, see that FW screen is orientation properly. Change-Id: If9316c0ce33c17057372ef5995a2c68de4f11f02 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-07-26libpayload/serial/qcs405: Mark uart console as suchPatrick Georgi
depthcharge prefers knowing where its input comes from BUG=b:137378326 BRANCH=none TEST=ctrl-d / enter to enter dev-mode works now. Change-Id: I74b5be18c3583be17c73950ced93fad883690090 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25payloads/external/Yabits: Pass XGCCPATHNico Huber
Pass `XGCCPATH` instead of individual programs as that is what the Makefile expects. Change-Id: I3267ec5259e9d37b2f3b0b8c126d173fc8b5a3ca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-23vboot: deprecate vboot_handoff structureJoel Kitching
vboot_handoff is no longer used in coreboot, and is not needed in CBMEM or cbtable. BUG=b:124141368, b:124192753 TEST=make clean && make runtests BRANCH=none Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23libpayload/libc: Use size_t for lengths and indicesJacob Garber
size_t is the natural integer type for strlen() and array indices, and this fixes several integer conversion and sign comparison warnings. Change-Id: I5658b19f990de4596a602b36d9533b1ca96ad947 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33794 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23libpayload/libc: Tidy utf16le_to_asciiJacob Garber
- Constify the string argument - Change int to size_t, which is what xmalloc expects Change-Id: I8b5a13319ded4025f883760f2b6d4d7a9ad9fb8b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-23libpayload/libc: Correct strlcat return valueJacob Garber
The documented return value for strlcat is horribly wrong, as is the return value itself. It should not return the number of appended bytes, but rather the length of the concatenated string. From the man page: The strlcpy() and strlcat() functions return the total length of the string they tried to create. For strlcpy() that means the length of src. For strlcat() that means the initial length of dst plus the length of src. While this may seem somewhat confusing, it was done to make truncation detection simple. This change is more likely to fix existing code than break it, since anyone who uses the return value of strlcat will almost certainly rely on the standard behaviour rather than investigate coreboot's source code to see that we have a quirky version. Change-Id: I4421305af85bce88d12d6fdc2eea6807ccdcf449 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-21libpayload: Enable -Wimplicit-fallthroughJacob Garber
Add comments to intentional fall throughs and enable the warning. Change-Id: I93e071c4fb139fa6e9cd8a1bfb5800f5f4eac50b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19payloads/GRUB: Use correct script name in MakefileGompa
Fixes: 3555389a8c (payloads: Update GRUB stable from 2.02 to 2.04) Change-Id: I2f95059453ca5565a38550b147590ece4d8bf5ad Signed-off-by: Gompa <gompa@h-bomb.nl> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-13util/testing: Ensure coreboot-gerrit fails if libpayload build failsKeith Short
The JUnit output from the libpayload builds was getting deleted by the coreinfo build. Move the libpayload to later in the coreboot-gerrit job. Also add messages to stdout indicating the various libpayload configs that are built and a message indicating when all libpayload builds are complete. BUG=b:137380189 TEST=Upload test commit that includes a libpayload compile error and verify buildbot fails. Change-Id: I43b55f402216582dcf81be34171437be345572ab Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34183 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13payloads: Update GRUB stable from 2.02 to 2.04Paul Menzel
GRUB 2.04 was released on July 5th, 2019, so update. The only change-log is the git history. Some coreboot related changes are listed below. 1. coreboot: Changed cbmemc to support updated console format from coreboot. 2. ahci: Increase time-out from 10 s to 32 s 3. normal/menu: Do not treat error values as key presses When building from the git repository, `./bootstrap.sh` needs to be run to set up Gnulib. Ignore the exit code, as older versions might not have this script. Change-Id: Iab0b87164ed86f15d3415af935998b59e0d76c45 Signed-off-by: Pablo <42.pablo.ms@gmail.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09libpayload/usb: fix DWC2 driverPatrick Georgi
A typo introduced in commit bf2c693f893ab6f9458f1a4840c2a9cbbd4bb9f2 made the driver not build: DWC_SLEEP_TIME_US instead of DWC2_SLEEP_TIME_US. Change-Id: I197b25fd4f568cce7a4bbcee8cc285b25b26afb1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Keith Short <keithshort@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-08payloads/external/Memtest86Plus: update to version 002 stableMartin Kepplinger
The memtest86plus project has been tagged as stable. Update the coreboot build accordingly. Change-Id: I078ac5d91e60a424efb5e14f39ae59e7ae9cbfe2 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-07payloads/coreinfo: Enable -Wmissing-prototypesJacob Garber
Change-Id: I7ee9436ba71ceea35a35272291ea245c0b7c37c5 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Make internal functions staticJacob Garber
These functions are only used in the files they are defined in, so they can be made static. Change-Id: Ic7f78912803cbdd1cb3a75f7f69f526739dab6e7 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Enable -WextraJacob Garber
This enables extra useful warnings. Change-Id: I3d54988935c7df9ac0dc2f7aceb56fb720c9c4d1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Use correct integer types for loop indicesJacob Garber
Make sure that the type of the loop index matches the type of the upper bound. This fixes several -Wsign-compare warnings. Change-Id: I73a88355d86288609e03f7a6fcaec14dfedac203 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Use fixed-width integers for cpuidJacob Garber
This function executes the cpuid instruction, which takes a 32 bit input value (idx), and then stores output in eax, ebx, ecx, and edx, which are all 32 bit registers. Update the prototype to use fixed-width integers, and update all usage calls appropriately. Change-Id: I15876fa35628d3a505864fb49be4fdab1fd19f4a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02libpayload/usb: Increase USB request timeout to 5 sKeith Short
Increase the timeout for USB requests to 5 seconds for all USB host controllers. Prior to this fix, the xCHI driver was detecting false timeouts during SET ADDRESS requests when nested downstream hubs were connected to the xHCI root hub. BUG=b:124730179 BRANCH=sarien TEST=Build libpayload and depthcharge on sarien/arcada. TEST=Without change replicate USB set address timeouts in depthcharge when dock and 4K monitor connected (which includes a total of 4 USB hubs). With timeout fix, depthcharge boots OS with no USB errors and the same USB topology. Note that this tests xHCI operation only. Change-Id: I53e3e67d893420e7c9e8b52c47dd0edb979e5468 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-29libpayload: cbgfx: Run cbgfx_init() before we need it for draw_box()Julius Werner
calculate_color() uses the 'fbinfo' global that is initialized by cbgfx_init(), so we need to run the latter before we can run the former or we get a null pointer access. Change-Id: I73ca8e20ca36f64d699379d504fd41dc2084f157 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2019-06-28payloads/external/LinuxBoot: Update x86_64 defconfigPatrick Rudolph
* Add support for Linux 5.x ** Select PCI, which isn't the default anymore with 5.x ** Select google firmware driver, which wasn't build any more * Add support for Intel LPSS uart ** Select MFD and MFD_INTEL_LPSS_PCI ** Increase console count to 32 * Add support for coreboot framebuffer ** Select FB_SIMPLE * Add support for eMMC/SDHCI ** Select MMC_SDHCI_* * Add support for u-root's localboot ** Select KEXEC_FILE_LOAD ** Select FIRMWARE_MEMMAP Stats: * Kernel size 1.9MiB * U-root (core + systemboot) 4.6MiB Tested on Intel APL Up² board: * Fixes non working console on APL Up2 board and eMMC bootmedia shows up. * Allows to boot GNU/Linux from eMMC using 'localboot' Change-Id: Ib5bd33531741e588ac7d5ff6a02b0482f6655ddf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-06-27libpayload: Re-initialize UART RXPrudhvi Yarlagadda
UART RX needs to be re-initialized in libpayload as it is getting reset at the end of coreboot. Change-Id: I7820bd7afd2e5f81e21a43f330ed42d3a732d577 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-21payloads/libpayload: Update a Makefile for sample libpayloadAsami Doi
and make a configuraton for QEMU/ARM. This CL allows building a sample libpayload for QEMU/ARM. Change-Id: Ia32872c43a99357aa966de3582f6fdb2e2652517 Signed-off-by: Asami Doi <doiasami1219@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-18commonlib: define cbtable tags as enum to identify conflictsPatrick Georgi
We had a value that was overloaded thrice. By moving them in a common structure and ordering them by value such issues are hopefully avoided in the future. Also add a few values to libpayload that were only defined in commonlib. Change-Id: I227d078eebee2d92488454707d4dab8ecc24a4d8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32958 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-18libpayload: define cbtable tags as enum to identify conflictsPatrick Georgi
We had a value that was overloaded thrice. By moving them in a common structure and ordering them by value such issues are hopefully avoided in the future. Change-Id: I0c7762601d7620413989b458fa634d7606accc9d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32957 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-14libpayload/i8042/keyboard: Log errors during initializationFurquan Shaikh
Add error messages for all failed commands in keyboard_init(). Change-Id: Ie42ccbc4d850912c83e00376b27f192d5b652057 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13libpayload: Add USB support to mistral configPatrick Georgi
Change-Id: I2ef42f7d607eec6166d762ad71c0d9540906589d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: SANTHOSH JANARDHANA HASSAN <sahassan@google.com>
2019-06-06Revert "libpayload: Reset PS/2 keyboard"Nico Huber
Documentation is scarce on the matter, however the related coreboot code suggests that after the ACK, the keyboard also sends the result of the self test (passed/failed). It looks like this result is never consumed here, probably resulting in further confusion for later com- mands. Let's revert this for now (if it's not too late for the 4.10 release) and break things later again. IMHO, due to the fact that there are dozens of different keyboard controller and keyboard implementations and no accurate specification followed, such changes should be tested on a lot of hardware before merge. This reverts commit a99ed13e3397bc536012120aab8cadb827913863. This reverts commit 7ae606f57f0b3d450ae748141b0e2367041b27d3. Change-Id: I4d4304d5d8a01e013feac61016c59bcaeea81140 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-04libpayload: Add UART for qcs405Prudhvi Yarlagadda
TEST=build Change-Id: I43164cf9eacc844af1d048f7b6ebbda96fc9d202 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-04libpayload/i8042/keyboard: Fix return value check for keyboard_cmdFurquan Shaikh
CB:32951 ("libpayload: Reset PS/2 keyboard") added a call to reset keyboard and check the return value of keyboard_cmd() to compare against I8042_KBCMD_ACK. However, keyboard_cmd() already checks for ACK and returns 1 or 0 based on whether ACK is received. This change fixes the check introduced by CB:32951 to compare against 0 just like the other checks for keyboard_cmd(). Additionally, it adds error messages for all failed commands in keyboard_init() to make the prints consistent in case of failure. BUG=b:134366527 TEST=Verified that logs do not contain "ERROR: Keyboard reset failed" anymore. Change-Id: Idcadaae12e0a44e404a1d98c6deb633d97058203 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-29libpayload/drivers/i8402/kbd: Fix qemuPatrick Rudolph
Reset keyboard controller to fix qemu make scan codes. Change-Id: I5f8ad2d4be4b9e89d9af3a62726259e77f0403c1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/23584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-29payloads/external/Linuxboot: Fix Makefile when not using bashChristian Walter
Adding "SHELL := /bin/bash" to the Makefile makes sure, that we use the bash shell which is needed here. Tested with oh-my-zsh. Change-Id: I71495e15b8f1a495af7d8ab21cc5235feb595e01 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33014 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-29payloads/external/iPXE: Add more Kconfig optionsPatrick Rudolph
Add two new options: * Disable the prompt "Press Ctrl+B for the iPXE command line..." Add a boolean that disables the initial 2 second timeout. * Include a script that is executed instead of showing a shell. Allows to add a script that will be included into the iPXE ROM. Tested on Lenovo T500 and PC Engines apu2. Change-Id: Ie1083d8571d9d1f1c7c71659fb6ff0de2eecad0e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/20782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-27libpayload: Reset PS/2 keyboardPaul Menzel
Loading a libpayload based payload like coreinfo or FILO from SeaBIOS or GRUB pressing keys does not give the expected results. For example, pressing F1 gives the character 24 translated to scan code 6a. ESC for example 43 (111) in coreinfo loaded from SeaBIOS on QEMU Q35. The problem is not reproducible using the payload directly, that means without SeaBIOS or GRUB. The problem seems to be, that those have already initialized the PS/2 controller and AT keyboard. Comparing it with coreboot’s PS/2 keyboard code, the keyboard needs to be reset. That seems to fix the issue, when the keyboard was initialized before. TEST=Build coreboot for QEMU Q35 with SeaBIOS, and coreinfo as secondary payload. Run qemu-system-i386 -M q35 -L /dev/shm -bios build/coreboot.rom -serial stdio press 3 to select the coreinfo payload, and verify that the keys F1 and F2 are working. Same with coreinfo loaded from GRUB on the ASRock E350M1. Change-Id: I2732292ac316d4bc0029ecb5c95fa7d1e7d68947 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-23Renumber cbtable tag MMC_INFOPatrick Georgi
We got another tag in the meantime, so resolve the conflict. Change-Id: I64cb5e02a9bed3d8746b75e451c13a1598341ba1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32954 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23coreboot_tables: pass the early_mmc_wake_hw status to payloadBora Guvendik
Pass the return value from early_mmc_wake_hw() to the payload so that payload can skip sending CMD0 and resetting the card in case of success or in case of a failure in firmware, payload can recover by sending CMD0 and resetting the card. BUG=b:78106689 TEST=Boot to OS Change-Id: Ia4c57d05433c3966118c3642913d7017958cce55 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25464 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16libpayload: make log2 and clz work on signed values internallyPatrick Georgi
Needed to make libpayload build clean with -Wconversion. BUG=b:111443775 BRANCH=none TEST=make junit.xml shows fewer warnings with -Wconversion enabled Change-Id: Ie193e39854d2231b6d09a2b0deeeef2873e900ab Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-15payloads/coreinfo: Remove unused variableJacob Garber
The 'last' variable is unused, and has been for the entire history of this file. Found-by: Clang Static Analyzer Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ic86a6d8d2b47585f901f1e48ae88735534c834ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/32796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-15libpayload: ahci: Prevent memory leaks when failing on initJacob Garber
Free several resources when AHCI initialization fails. Note that it is only safe to free resources when the command engine has stopped, since otherwise they may still be used for DMA. Found-by: Coverity CID 1260719, 1260727, 1261090, 1261098 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I6826d79338b26ff9696ab6ac9eb4c59f734687d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-13libpayload/drivers/i8042: Add fallthrough commentJacob Garber
Ctrl-delete does nothing, so it falls through to the default case. Add a comment to make this explicit. Found-by: Coverity Scan #1260878 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I4a6f51cb04696b6ebcb554c5667a5bbea58622c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-13libpayload: classify all keyboardsMatt Delco
Depthcharge uses the keyboard type to help determine whether it can trust the keyboard for security-sensitive confirmations. Currently it trusts anything except usb, but now there's a need to distrust ec-based ps/2 keyboards that are associated with untrusted ECs. To help facilitate this, coreboot needs to report more details about non-usb keyboards, so this change replaces the current instances of unknown with enum values that distinguish uart and gpio from ec-based keyboards. BUG=b:129471321 BRANCH=None TEST=Local compile and flash to systems with trusted and non-trusted ECs. Confirmed that security confirmation can't be performed via keyboard on a system with an untrusted EC but can still be performed on a system with a trusted EC. Change-Id: Iee6295dafadf7cb3da98b62f43b0e184b2b69b1e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-24payloads/seabios: Update the stable git hash of 1.12.1Martin Kepplinger
The Kconfig file has been updated to show 1.12.1 but this is only what gets displayed for the "stable" option. Fix this by updating the actual git hash for the SeaBIOS 1.12.1 release tag. Fixes: fb83ff1a8b ("Update stable from 1.12.0 to 1.12.1") Change-Id: I76dc0dc8b651df0c6ff6f3c02819a70bab8c04cd Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-23linuxboot/Kconfig: Remove symbol name of a `choice`Nico Huber
Kconfig somehow adds spurious booleans for each alternative when the choice itself has a name. That's fixed simply by removing the name. Change-Id: Ic35f0697f1f7bb92c12414c17a8790464b376012 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-04-23payloads/U-Boot: Update to the latest stable 2019.4Arthur Heymans
Change-Id: I4740aa80e3c0faf9b18730390af778abcc92aac3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-23payload/U-Boot: Fix generating a default config on the master branchArthur Heymans
The name of the default configuration file for x86 coreboot changed. Change-Id: I6544142a70bd3e1e13ee52eccbd5335f8375a4f6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-23payloads/U-Boot: Use a phony target for checking out a revisionArthur Heymans
Change-Id: I5ea4df33545f69c06e4ae2158a1a6c14ead784a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-23payloads/U-Boot: Unexport the coreboot_exportsArthur Heymans
Without this U-Boot ends up overwriting the coreboot .config when generating a configfile. Change-Id: I62fc0aa3ede0287ffc96915182a2ed5a4877f29d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-21ipxe: Update stable version from 2017.3 to to 2019.3Martin Roth
Updating iPXE stable from commit id fd6d1f4660: Fri Mar 31 09:08:13 2017 +0300 [thunderx] Use ThunderxConfigProtocol to obtain board configuration to commit id ebf2eaf515: Mar 18 10:24:08 2019 +0000 [intel] Add PCI ID for I219-V and -LM 6 to 9 This brings in 176 new commits Change-Id: Id35fee38e0e61897a623dae35f42fc580e32d3ee Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-17mediatek: Use the 64-bit timerTristan Shieh
GPT4 is a 32-bit timer and the counter of GPT4 will overflow in about 330 seconds (0xffffffff / 13MHz). Timer and delay functions will not work properly if the counter overflows. To fix that we should use the 64-bit timer (GPT6). BUG=b:80501386 BRANCH=none Test=emerge-elm coreboot; emerge-kukui coreboot Change-Id: I9f080e47253a1b1bab4636a45cb86c8666a25302 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com>
2019-04-15LinuxBoot/targets/linux.mk: refactor kernel compilationMarcello Sylvester Bauer
Refactor the linux kernel compilation. Change-Id: Iea2e2c8a22a91bdd2e3f83cd3058426acec3eaba Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-04-11libpayload/option table: Don't pad string entries with garbageNico Huber
set_option_with() expects a buffer of the exact size of the option. Change-Id: I21332394f88cf2daa4f733a544627d6d3c6ef26c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-11libpayload/storage: Add Apollo Lake AHCI ID to tested controllersNico Huber
Change-Id: Iee244d0cd7d64934fbfc34778a45e21e97646628 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-11libpayload: keyboard: Add F11 and F12 supportMatt Delco
The firmware is basically ignoring F11 and F12 without this change. BUG=b:130143385 TEST=local compile and flash to device. Confirmed that press of F11 and F12 keys now generates appropriate keypress events (and the same codes that are already generated by these keys on an external USB keyboard). Signed-off-by: Matt Delco <delco@chromium.org> Change-Id: Ic43114aa99fc0a1345782c81ed2b90f5569af383 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-10libpayload: Deduplicate strtol and strtoullJulius Werner
Our strtol() and strtoull() function contain almost exactly the same code. This is a) bad in general and b) may cause the code to get out of sync, such as it recently happened with CB:32029. This patch changes strtol() to be based on strtoull() so that the main parsing code exists only once, and also adds a strtoll() to round off the library. Also fix the bounds imposed by strtoul() to be based on the actual length of a 'long', not hardcoded to 32-bits (which is not equivalent on all architectures). Change-Id: I919c65a773cecdb11739c3f22dd0d182ed50c07f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-10libpayload: limits.h: Provide reliable definitions for all XXX_MAX/MINJulius Werner
Our current limits.h only provides (U)INT_MAX constants. This patch adds most others expected by POSIX. Since some of these may be different depending on architecture (e.g. 'long' is 32-bit on x86 and 64-bit on arm64), provide a definition that will automatically figure out the right value for the data model the compiler is using (as long as it's using two's complement for signed integers, which I think we can assume these days). Change-Id: I1124a41279abd4f53d208270e392e590ca8eaada Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-10libpayload: Fix CONFIG_LP_DEBUG_MALLOC for 64-bit archsJulius Werner
New compilers are a little more stringent about defining the same prototype more than once, so some of our CONFIG_LP_DEBUG_MALLOC wrappers don't quite work the way they are written anymore. Also, several of the printf()s weren't written 64-bit safe. And let's add some double-evaluation safety while I'm here anyway... and I have no idea why this ever depended on CONFIG_LP_USB, that just seems like a typo. Change-Id: Ib54ebc3cfba99f372690365b78c7ceb372c0bd45 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/14921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-09libpayload: Fix potential NULL pointer dereferenceFrancois Toguo
Found-by: Klockwork BUG=NONE TEST=Boot to OS on GLK Sparky Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com> Change-Id: I9d4636f0429de829e746909492c2f543026a02ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/32083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-08libpayload/drivers/timer: Use 64 bits to prevent overflowJacob Garber
Cast cpu_khz to a 64 bit integer to prevent possible integer overflow (the multiplication is currently done using 32 bit math). Similar to 61dac13 (libpayload: timer: cast cpu_khz to make sure 64bit math is used). Found-by: Coverity Scan, CID 1261177 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Iadb0abb7c7cc078f31a6d88d971f5d1b8ac62a9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-05libpayload: Align main() data typesPatrick Georgi
One of many steps to compile with -Wconversion, as unsigned int and int aren't the same thing. BUG=b:111443775 BRANCH=none TEST=make junit.xml shows fewer warnings with -Wconversion enabled Change-Id: I9673ca70da32a1e5117b27fa89167e03379af9c1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-04Make common macros double-evaluation safeJulius Werner
I just got hit by a double-evaluation bug again, it's time to attempt to fix this once more. Unfortunately there are several issues that don't make this easy: - bitfield variables don't support typeof() - local macro variables that shadow others trigger -Werror=shadow - sign warnings with integer literal and unsigned var in typeof-MIN() - ({ statement expressions }) can not be used outside functions - romcc doesn't support any of the fancy GCC/clang extensions This patch tries to address all of them as far as possible with macro magic. We don't have the technology to solve the bitfield and non-function context issues yet (__builtin_choose_expr() still throws a "no statement expression outside a function" error if it's only in the branch that's not chosen, unfortunately), so we'll have to provide alternative macros for use in those cases (and we'll avoid making __ALIGN_MASK() double-evaluation safe for now, since it would be annoying to do that there and having an alignment mask with side effects seems very unlikely). romcc can continue using unsafe versions since we're hopefully not writing a lot of new code for it. Sign warnings can be avoided in literal/variable comparisons by always using the type of the variable there. Shadowing is avoided by picking very explicit local variable names and using a special __COUNTER__ solution for MIN() and MAX() (the only ones of these you're likely to nest). Also add DIV_ROUND_UP() to libpayload since it's a generally quite useful thing to have. Change-Id: Iea35156c9aa9f6f2c7b8f00991418b746f44315d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-02payloads/tianocore: Don't fail on resetting boot logoMatt DeVillier
If using a commit/branch which doesn't use a boot logo, we don't want the build to fail unnecessarily Test: build with upstream Tianocore commit hash, avoid failure after successful compilation. Change-Id: Ic41bacbb97926e9538f434aecc0f0eebc5f6326f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-01payloads/coreinfo: Free buffer before returningJacob Garber
This fixes a memory leak, which was partially resolved in 2d1e0eb (payloads/coreinfo: Free buffer before returning). Found-by: Coverity Scan, CID 1373370 (RESOURCE_LEAK) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I0efe94b9dfb27746828055427029c01c7f407ec2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32094 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28payload: Only display `FIT support` on ARM64 platformsXiang Wang
Change-Id: Ided1cc22173342fa751b84db5f08a5cf7408941d Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-26libpayload: strtoull: Fix edge case bug with *endptrJulius Werner
strtoull() can optionally take a second pointer as an out-parameter that will be adjusted to point to the end of the parsed string. This works almost right, but misses two important edge cases: firstly,when the parsed string is "0", the function will interpret the leading '0' as an octal prefix, so that the first actually parsed digit is already the terminating '\0' byte. This will cause the function to early abort, which still (correctly) returns 0 but doesn't adjust *endptr. The early abort is pointless anyway -- the only other thing the function does is run a for-loop whose condition is the exact inverse (so it's guaranteed to run zero iterations in this case) and then adjust *endptr (which we want). So just take it out. This also technically corrects the behavior of *endptr for a completely invalid string, since the strtoull man page says > If there were no digits at all, strtoul() stores the original value of > nptr in *endptr (and returns 0). The second issue occurs when the parsed string is "0x" without another valid digit behind it. In this case, we will still jump over the 0x prefix so that *endptr is set to the first byte after that. The correct interpretation in this case is that there is no 0x prefix, and instead a valid 0 digit with the 'x' being invalid garbage at the end. By not skipping the prefix unless there's at least one valid digit after it, we get the correct behavior of *endptr pointing to the 'x'. Change-Id: Idddd74e18e410a9d0b6dce9512ca0412b9e2333c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-21payloads/seabios: Update stable from 1.12.0 to 1.12.1Paul Menzel
The two commits below were supplied to the stable branch. 1. 7d63249 tpm: Check for TPM related ACPI tables before attempting hw probe 2. a5cab58 (tag: rel-1.12.1, origin/1.12-stable) usb-ehci: Clear pipe token on pipe reallocate Change-Id: I7f1165d87950145e0538eac094c5bb9bfca4db3c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-19vboot: make vboot workbuf available to payloadJoel Kitching
Create a new cbtable entry called VBOOT_WORKBUF for storing a pointer to the vboot workbuf within the vboot_working_data structure. BUG=b:124141368, b:124192753 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x BRANCH=none Change-Id: Id68f43c282939d9e1b419e927a14fe8baa290d91 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31887 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-18libpayload: qcs405: Add new ConfigsNitheesh Sekar
Add Additional configs to enable Timer and CHROMEOS build. TEST=build Change-Id: I15273fdacab0a23e05e821c433cf939be35fab97 Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-07payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-07Add new CONFIG(XXX) macro to replace IS_ENABLED(CONFIG_XXX)Julius Werner
The IS_ENABLED() macro is pretty long and unwieldy for something so widely used, and often forces line breaks just for checking two Kconfigs in a row. Let's replace it with something that takes up less space to make our code more readable. From now on, if (IS_ENABLED(CONFIG_XXX)) #if IS_ENABLED(CONFIG_XXX) shall become if (CONFIG(XXX)) #if CONFIG(XXX) Change-Id: I2468427b569b974303084574125a9e1d9f6db596 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-04payloads/tianocore: remove single branch checkout parameterMatt DeVillier
using '--single-branch' when cloning the tianocore repo prevents the use of other branches/commits outside of the checked-out coreboot_fb branch, so remove it. Test: build with TIANOCORE_REVISION selected and revision set to origin/master, verify checkout succeeds Change-Id: If8c93aa87957ba2ff9ab7a58e84d2a25b48ec346 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/31686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-04fmap: Add FMAP_AREA_PRESERVEHung-Te Lin
When updating firmware, we may need to preserve some sections like VPD, calibration data, ... etc. The logic can be hard-coded in updater as a list of known names, but a better solution is to have that directly declared inside FMAP area flags. To do that, the first step is to apply the changes in flash map (http://crosreview.com/1493767). A new FMAP_AREA_PRESERVE is now defined and will be set in future with new syntax in FMD parser. BUG=chromium:936768 TEST=make; boots an x86 image. Change-Id: Idba5c8d4a4c5d272f22be85d2054c6c0ce020b1b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/31676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-02libpayload: i8042: Only test PS/2 AUX port when enabledDuncan Laurie
If a PS/2 AUX device is not present then the AUX test command during i8042_probe() will time out and add ~500ms to the boot time. In order to avoid this only test the PS/2 AUX port if CONFIG_LP_PC_MOUSE is enabled. BUG=b:126633269 TEST=boot on device without AUX port and check that this command does not get executed, saving ~500ms at boot. Change-Id: I2ebdecc66933bd33d320b17aa4608caf4aaf54aa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-02libpayload: keyboard: Add option to ignore failures during initDuncan Laurie
If keys are pressed at boot some keyboard controllers will not properly respond with an ACK to commands, which results in the keyboard_init function aborting before it adds the keyboard to the input device list. This same keyboard controller will manage to properly return keyboard data when keys are pressed later, so it is possible for it to be functional in the payload even if it does not respond properly to every command during initialization. In order to allow payloads to use the keyboard when this happens a new Kconfig option is added to ignore the keyboard ACK response and always add the keyboard to the input device list. This option is disabled by default and must be enabled by the specific boards that need it. BUG=b:126633269 TEST=boot on device with this controller and press keys during boot and see that the keyboard is still functional in the payload. Change-Id: Icc6053f99804f1b57d785cb04235b5c4b8d5426f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-01payloads/tianocore: Add option for custom bootsplashMatt DeVillier
Add Kconfig options to use custom bootsplash file, dependent on using MrChromebox's stable branch, with help info conveying required file format. Adjust Makefile to copy the custom bootsplash and overwrite the default Logo.bmp file, handling both absolute and relative paths, and restore the original logo file after building so as to keep the working directory clean. Test: build with and without custom bootsplash, ensure correct bootsplash displayed Change-Id: I164f46777169801cff56633fd920bc81b7c8129a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/31561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-02-28libpayload: cbfs: Check decompressed size when loading filesYou-Cheng Syu
After loading compressed files in CBFS, we should check the decompressed size is equal to the expected size. This might help us detect file content corruption or compressor/decompressor bugs. BUG=none BRANCH=none TEST=manually (we can still boot into kernel on Kukui, and verify that loading files from CBFS still works by seeing ChromiumOS firmware screen). Change-Id: Ia756cc5477670dd0d1d8aa59d4160ab4233c6795 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31564 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-28libpayload: cbfs: Require input size and output size for cbfs_decompressYou-Cheng Syu
Currently, cbfs_decompress() calls ulzma() and ulz4f() for LZMA/LZ4 decompression. These two functions don't accept input/output size as parameters. We can make cbfs_decompress more robust by calling ulzman() and ulz4fn() instead. This could prevent us from overflowing destination buffer. BUG=none BRANCH=none TEST=boot into kernel on Kukui with COMPRESSED_PAYLOAD_LZMA / COMPRESSED_PAYLOAD_LZ4. Change-Id: Ibe617825bd000ed618791d8e3c5f65bbbd5f7e33 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2019-02-26payloads/tianocore: default to MrChromebox's working branchMatt DeVillier
Rather than attempt to maintain patches against upstream Tianocore, use MrChromebox's coreboot framebuffer branch as the default build target. Rework the Makefile to default to MrChromebox's coreboot_fb branch, but also allow for aribitrary commits from upstream Tianocore to be used as build targets. Ensure the branch is synced on each build, as long as working directory is clean, and that switching between commits or trees is handled sanely. Eliminate TIANOCORE_MASTER as a selectable build target, since unpatched it is unlikely to boot on any device. It can easily be specified via the 'revision' option if desired. Test: build for the default stable target, for upstream/master as the specified revision, and for an arbitrary valid commit hash. Change-Id: I4a83db3cd64c7d5b652c6e95780d10051f143e88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/31543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-02-13libpayload/sys/types.h: Add definition for off_tNico Huber
`off_t` is supposed to be signed, but has no (minimum) width specified. We'll assume 32-bit minimum, like a `signed long int`. Also include `sys/types.h` in `libpayload.h` so everything is available through the latter. Change-Id: I6c0c1bc1a959db7863cbad2ba29318da162431be Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/31346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-02-11libpayload: add memchr to libcPhilipp Hug
libfdt requires memchr. Add missing function to libc. Change-Id: I872026559d16a352f350147c9d7c4be97456a99f Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/31354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-24Kconfig: Remove symbol names for choicesNico Huber
These are completely throwing Kconfig off, resulting in duplicate entries. Change-Id: I401467da686d5011a456b661a10170492a919c81 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-12-18Fix typos involving "the the"Jonathan Neuschäfer
Change-Id: I179264ee6681a7ba4488b9f1c6bce1a19b4e1772 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-09libpayload: Don't try to use invalid row countMartin Roth
console->scroll_up() was hanging when console->rows is 0. This was happening on delan if no screen was attached. If there are no rows, just return. BUG=b:119234919 TEST=Boot delan with no flat panel. System boots to OS Change-Id: Ib022d3c6fc0c9cf360809dca28761a50c787304a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/30092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-12-05libpayload: Remove unused timer/serial driversJulius Werner
This patch removes several timer and serial drivers (and configs) that were specific to platforms which have been dropped in coreboot. Change-Id: I589ca7f1a3b479f1c2b1b668a175a71583441ac9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/30029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2018-11-30LinuxBoot: fix initramfs xz compressionMarcello Sylvester Bauer
Add the flag '--check=crc32' to the xz compression to use CRC32 for the integrity check. The linux kernel does not support CRC64 for integrity checks, which is the default flag on most xz applications. Change-Id: I738bd99ef22aa053dc198df5595e1878069de13e Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-28LinuxBoot: refactor u-root.mkMarcello Sylvester Bauer
Clean the u-root initramfs integration and add essential flags as options. Now u-root automatically fetch updates and rebuilts itself to apply changes. Change-Id: Id978ed2ebeff96c5be4f74ae07df9be76e106a1b Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-28LinuxBoot: refactor payloadMarcello Sylvester Bauer
Clean and refactor the structure of the LinuxBoot payload integration, to make it more modular and readable. The kernel and initramfs should handled in separated makefiles. tested with: - qemu-i440fx (x86, x86_64) - cavium CN8100 (arm64) Change-Id: I41d0275a5f7efb920e881f43b0acda29f41ee221 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-28payloads/external/SeaBIOS/Kconfig: relax native VGA dependencyMarcello Sylvester Bauer
Allow the inclusion of a generated option rom despite the presence of a VGA BIOS. It is useful for dual graphics with an Intel GPU. Change-Id: Ic3a219c2dc2133c3328192840538f0fbd1ed935a Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/c/29823 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-28payloads/libpayload/libcbfs: Remove duplicated ';' at end of lineElyes HAOUAS
Change-Id: Id3750e839fc277e22387b78e938cc59bb3902697 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29846 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22payloads/seabios: Update stable from 1.11.2 to 1.12.0Martin Kepplinger
SeaBIOS 1.12.0 has been tagged. News are * Initial support for "TPM CRB" hardware * Improved cdrom media reporting in the boot menu on QEMU * Improved floppy support on real floppy hardware * SeaVGABIOS support for QEMU "bochs-display" and QEMU "ramfb" displays * Several bug fixes and code cleanups among others, see http://seabios.org/Releases Tested by running it on a Thinkpad X230. Change-Id: I5f8364977ce957d3e8d84d7b046d1cec36b8da6a Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/29724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21payloads/tianocore: rebase patches to UDK2018 releasePiotr Król
Patches should be applied against edk2 release instead of arbitrary commit. This aims to simplify Tianocore payload support by other platforms. Change-Id: Ib409f6f93eb64d7a9a2f09a75f8e637ab8689410 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/27615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-16Linux/Linuxboot: share cmdline and initrd parserMarcello Sylvester Bauer
Merge the command-line and initramfs parser from 'a linux payload' and 'LinuxBoot'. GOAL: merge 'a Linux payload' and 'LinuxBoot' Change-Id: I2d2aef5d07453b98e115af6ee06318c690def785 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/29510 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16payloads/libpayload/drivers/storage: Get rid of void pointer mathRichard Spiegel
Pointer math with void pointers is illegal in many compilers, though it works with GCC because it assumes size of void to be 1. In this particular situation, dev->buf is already pointer to u8, and there's no need to convert to void *. BUG=b:118484178 TEST=Build libpayload. Change-Id: Ib70b8ce11abc88c35be4092f097cfff385921f46 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-06payloads/coreinfo/cbfs_module.c: Get rid of void pointer mathRichard Spiegel
Pointer math with void pointers is illegal in many compilers, though it works with GCC because it assumes size of void to be 1. Change the pointers or add parenthesis to force a proper order that will not cause compile errors if compiled with a different compiler, and more importantly, don't have unsuspected side effects. BUG=b:118484178 TEST=Build coreinfo with original code, run objdump and saved output. Added modifications, build coreinfo again, run objdump again, compared objdump outputs. Change-Id: I1bbdc9499d257c5051fd7a86ca8b5c68bbf2e81d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29344 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>