summaryrefslogtreecommitdiff
path: root/payloads
AgeCommit message (Collapse)Author
2013-02-28libpayload: Check for completion more often in ehci_set_periodic_schedule.Gabe Black
This function was using mdelay in a loop to check for the completion of an USB controller operation. Since we're busy waiting anyway, we might as well wait only 1 us before checking again and potentially seeing the completion 999 us earlier than we would otherwise. Change-Id: I177b303c5503a0078c608d5f945c395691d4bd8a Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2522 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-26libpayload: Add a pointer for user data on the USB MSC data structure.Gabe Black
This is so the user of libpayload can attach data to the device which it can retrieve when the device is referred to later, for instance in usbdisk_remove. Otherwise, there's no direct connection from the usbdev_t structure to any bookkeeping in the host firmware. Change-Id: I36fe693b0dcd2098e359c26744e376e73bd3a723 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2513 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-02-26libpayload: Correct a constant used for scanning for USB controllers.Gabe Black
When checking to see if a PCI device exists at a particular bus/dev/func, libpayload was checking the vendor and device id fields together against a 16 bit 0xffff. The two fields together are 32 bits, however, so the check was never true, and all dev/func combinations on a particular bus would be checked. That was slightly wasteful, but had relatively small impact. Change-Id: Iad537295c33083243940b18e7a99af92857e1ef2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2521 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-26libpayload: Change the measurement interval for get_cpu_speed to 2 ms.Gabe Black
The interval used to be about 55 ms which is excessively long. Coreboot only waits for 2 ms and gets a reasonable answer. That should be good enough for us as well. Change-Id: I4d4e8b25b6ba540c9e9839ed0bbaa1f04f67cce1 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2520 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-22libpayload: cbfs: Fix CBFS max size calculation.Hung-Te Lin
Cherry-picking CBFS fix from http://review.coreboot.org/#/c/2292/ For x86, the old CBFS search behavior was to bypass bootblock and we should keep that. This will speed up searching if a file does not exist in CBFS. For arm, the size in header is correct now so we can remove the hack by CONFIG_ROM_SIZE. Change-Id: I286ecda73bd781550e03b0b817ed3fb567d6b8d7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2458 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-20libpayload: Fix license headersStefan Reinauer
Not only were these files checked in with the Chromium OS Authors copyright, but in addition they were wrongly licensed as GPL. Switch to 3-clause BSD (and, since we're changing it, fix copyright, too) Change-Id: I3656c1f4304d53e343d89bb7c909fd4b929249f4 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2456 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-19libpayload: libcbfs: Fix legacy CBFS API, typosPatrick Georgi
get_cbfs_header expects CBFS_HEADER_INVALID_ADDRESS (0xffffffff) instead of NULL when something is wrong. Also, fix typo. Change-Id: Ibe56c9eab3b9fdfc6d0b14bc848ca75f3a4fc2f1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2455 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-16libpayload: only compile drivers/serial.c on machines that use it.Ronald G. Minnich
Create a new serial console variable, X86_SERIAL_CONSOLE which is only enabled when SERIAL_CONSOLE and ARCH_X86 are defined. Builds for x86 and ARM. Change-Id: I607253c418de015975a839e3c33577842885ec0c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2412 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15libpayload: Use the same type for 32 bit data in readl as in uint32_t.Ronald G. Minnich
The compiler gets mad when the types are equivalent size but not necessarily interchangeable because of strict aliasing checks. Since uint32_t is likely to be used when trying to read 32 bit data, it makes sense for them to be the compatible. Signed-off-by: Gabe Black <gabeblack@google.com> Change-Id: If73d794866055dc026fc06d6268e692adac0f835 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2411 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15libpayload: fix compiler flagsRonald G. Minnich
lpgcc was unconditionally setting -m32. Most of the flags it sets in the common case are right, however: no need to duplicate them everywhere, and we only want to change the common ones in one place, so it would be a shame to duplicate _CFLAGS all over the place. So add another variable, _ARCHEXTRA, which can be used to add special flags to _CFLAGS. We onlu use it at present for the x86; this may change. This allows us to get through compiling on arm and x86. Change-Id: I12f1620982c4ee10f76b3953e4225f13db31531e Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2399 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15libpayload: get time to compile cross-archRonald G. Minnich
Get rid of the nest of includes, and make separate sections for each architecture. Also gets rid of the "there's X86 and there's everything else" structure of this file. Change-Id: I4232f50f048fa05e911e5de3aa9ec1530931b461 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2397 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15libpayload: make functions static that are unused outside memory.cRonald G. Minnich
The default_ functions in memory.c are only used to initialize a weak variable. They should not be used outside memory.c. Make them invisible. Remove the declaration from libpayload.h. For real this time. Change-Id: Id54c1fd172c78748f01a958ce4065dd0eb53bbc3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2394 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-15libpayload: Use an appropriate range of memory when looking for cb tables.Ronald G. Minnich
These live at the bottom of memory on x86, but that's IO mapped on the exynos. The particular range used will likely need to be configurable, but this will make it work in one more case than it used to. Change-Id: I4d4963b9732cf538d00f8effb4398f30cbbde6aa Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2410 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-15libpayload: add a ldscript for armRonald G. Minnich
I think this needs to be its own ldscript. I'm pretty sure this one is going to need some work however. Is libpayload PIC? That would be best if so. Change-Id: I44578d70dfa72de527af8901a86583c2a60130ec Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2398 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-02-14libpayload; put the ldscript into an arch-dependent directory pathRonald G. Minnich
Since it's utterly architecture-dependent, put it in arch/x86. Avoid the temptation to make yet another directory with just one file in it. Fix the makefile to pick up the proper arch-dependent script. Change-Id: I21ea02551a97bdcbc38419714f3b38cf8335c178 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2389 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-12libpayload: New CBFS to support multiple firmware media sources.Hung-Te Lin
Upgrade CBFS in libpayload to use new media-based implementation from coreboot ( http://review.coreboot.org/#/c/2182/ ). Old CBFS functions (cbfs_find, cbfs_find_file, get_cbfs_header) are still supported, although the recommended way is to use new CBFS API. To migrate your existing x86 payload source: - Change cbfs_find to cbfs_get_file - Change cbfs_find_file to cbfs_get_file_content - Prefix every CBFS call with a CBFS_DEFAULT_MEDIA argument. Ex, char *jpeg_data = cbfs_find_file("splash.jpg", CBFS_TYPE_BOOTSPLASH); => char *jpeg_data = cbfs_get_file_content( CBFS_DEFAULT_MEDIA, "splash.jpg", CBFS_TYPE_BOOTSPLASH); The legacy setup_cbfs_from_{ram,flash} is also supported, although the better equivalent is to make a new media instance: struct cbfs_media ram_media; init_cbfs_ram_media(&ram_media, start, size); char *data = cbfs_get_file_content(&ram_media, "myfile", my_type); Verified by being successfully linked with filo. Change-Id: If797bc7e3ba975d7e3be905c59424f7a93b8ce11 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2191 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-01Fix libpayload xcompile xgcc pathMarc Jones
The libpaylaod xcompile script path to xgcc should look for coreboot/util, not libpayload/util. Change-Id: I565801549cdcdfcf55ecef1b543a982f969f435b Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/2261 Tested-by: build bot (Jenkins) Reviewed-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-01libpayload: add EHCI QH/qTD debuggingAnton Kochkov
Improve USB debugging for EHCI by adding dump_qh and enhacing dump_td to dump all queue chain and information. Change-Id: Ia8ecf19c6dac085cf9558bdf659a5e74ce332714 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/2053 Tested-by: build bot (Jenkins) Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-01-30libpayload: Update README with Git repository URL and directory locationPaul Menzel
Change-Id: I3e068f5e6c1eb875df0885c0ce43a03082be31a5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2228 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Project PIANO aka tianocorebootStefan Reinauer
This is a Tiano Core loader payload based on libpayload. It will load a Tiano Core DXE core from an UEFI firmware volume stored in CBFS. Currently Tiano Core dies because it does not find all the UEFI services it needs: coreboot-4.0-3316-gc5c9ff8-dirty Mon Jan 28 15:37:12 PST 2013 starting... [..] Tiano Core Loader v1.0 Copyright (C) 2013 Google Inc. All rights reserved. Memory Map (5 entries): 1. 0000000000000000 - 0000000000000fff [10] 2. 0000000000001000 - 000000000009ffff [01] 3. 00000000000c0000 - 0000000003ebffff [01] 4. 0000000003ec0000 - 0000000003ffffff [10] 5. 00000000ff800000 - 00000000ffffffff [02] DXE code: 03e80000 DXE stack: 03e60000 HOB list: 03d5c000 Found UEFI firmware volume. GUID: 8c8ce578-8a3d-4f1c-9935-896185c32dd3 length: 0x0000000000260000 Found DXE core at 0xffc14e0c Section 0: .text size=000158a0 rva=00000240 in file=000158a0/00000240 flags=60000020 Section 1: .data size=00006820 rva=00015ae0 in file=00006820/00015ae0 flags=c0000040 Section 2: .reloc size=000010a0 rva=0001c300 in file=000010a0/0001c300 flags=42000040 Jumping to DXE core at 0x3e80000 InstallProtocolInterface: 5B1B31A1-9562-11D2-8E3F-00A0C969723B 3E96708 HOBLIST address in DXE = 0x3E56010 Memory Allocation 0x00000003 0x3E80000 - 0x3EBFFFF FV Hob 0xFFC14D78 - 0xFFE74D77 InstallProtocolInterface: D8117CFE-94A6-11D4-9A3A-0090273FC14D 3E95EA0 InstallProtocolInterface: EE4E5898-3914-4259-9D6E-DC7BD79403CF 3E9630C Security Arch Protocol not present!! CPU Arch Protocol not present!! Metronome Arch Protocol not present!! Timer Arch Protocol not present!! Bds Arch Protocol not present!! Watchdog Timer Arch Protocol not present!! Runtime Arch Protocol not present!! Variable Arch Protocol not present!! Variable Write Arch Protocol not present!! Capsule Arch Protocol not present!! Monotonic Counter Arch Protocol not present!! Reset Arch Protocol not present!! Real Time Clock Arch Protocol not present!! ASSERT_EFI_ERROR (Status = Not Found) ASSERT /home/reinauer/svn/Tiano/edk2/MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c(461): !EFI_ERROR (Status) Change-Id: I14068e9a28ff67ab1bf03105d56dab2e8be7b230 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2154 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-25libpayload: use $(DOTCONFIG) instead of .configStefan Reinauer
When overriding the DOTCONFIG variable, make install will fail in libpayload. Change-Id: I332be3a4ca2620a32a6f5fbe683e6c71f0d6a9e9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2178 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-15libpayload: Style fixesStefan Reinauer
Change-Id: Ic3164fbffd8da6bd9d506d80e425ad89efc0f1af Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/2144 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-01-04Change "VERSION*" to more determined name "CBFS_HEADER_VERSION*".Hung-Te Lin
The 'VERSION' in CBFS header file is confusing and may conflict when being used in libpayload. Change-Id: I24cce0cd73540e38d96f222df0a65414b16f6260 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2098 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-12-20PDcurses: Delete automatically created (and unused) filesStefan Reinauer
Change-Id: Iefe0872d36c3a5d8ef42e62325838b7f09b389d2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2034 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2012-12-20libpayload: Another usb fixPatrick Georgi
Change-Id: I91b18fadbf17562f8b48e233631653f2a18c037c Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/2063 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-19libpayload: fix USBPatrick Georgi
A "far" modifier sneaked into the USB driver, but gcc doesn't understand it. Change-Id: I5c67bd55eabce467e1aa107c95c1db2518af7b0e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2059 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-19libpayload: improved UHCI TD debuggingAnton Kochkov
Improved USB debugging for EHCI by enhacing dump_td to dump all chain information Change-Id: I8c667b43e09c39ff12aafbd779474efd652bd80f Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/2054 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-12-19libpayload: improving OHCI TD/ED debuggingAnton Kochkov
Improving USB debugging for OHCI by enhacing dump_td and adding dump_ed function to dump all chain information Change-Id: Ia8b2a9b53e79b1f280fd12ea0d9233fc875e0b57 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/2056 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-12-18libpayload: Check if serial console h/w is present before usingDave Frodin
The serial_io_havechar() and serial_io_getchar() functions will always see keystrokes available if the serial hardware isn't actually there. We will still output chars to non-existant hardware to allow virtual hardware to capture them. Change-Id: I04e85157b6b7a185448abab352b5417a798a397a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2040 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-18libpayload: Use usb_debug() to show USB messagesDave Frodin
Previously printf()'s were used to show USB messages which results in lots of USB information being shown when it isn't needed. This will now use the usb_debug() printing funtion that already exists in usb.h. Change-Id: I2199814de3327417417eb2e26a660f4a5557cb9f Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2044 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-18libpayload: Update configs/defconfig fileDave Frodin
Several settings have been added to the config without any changes to the default settings file. Change-Id: Iaf9259d77fb3c4645fc68bc0108de79c0298f0a1 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2039 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-12-14libpayload: add kconfig.hStefan Reinauer
This implements the linux kernel's macros to handle boolean CONFIG_ variables more easily. Change-Id: I595f9db652d019fe72e231111258ec609bec9d4e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2036 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: Initial ARMv7 portStefan Reinauer
This compiles, but it's not tested yet. Change-Id: I2f73a814649aa36c39af3e77cefd8a968671f5c0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2035 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: rename i386 to x86Stefan Reinauer
Change-Id: Ia9170bd3d04e76dbf9321ca7ea4be23b5e468d21 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2033 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-13coreinfo: Build libpayload from coreinfo makefileMarc Jones
Build libpayload and install it in the coreinfo directory. Allows coreinfo to be built with a single make command. Change-Id: I56982265555aae16e482b0a0040989c1f5317423 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1995 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-13libpayload: increase the default heap sizeDave Frodin
Coreinfo uses the default heap size and will blow up if the USB keyboard is used. Change-Id: I2ffae330ec34167b2ccfbd4c428e3e8306230f44 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-12coreinfo: changes to get the USB keyboard workingDave Frodin
A call to usb_initialize() was needed. Also needed to set several curses flags. One to prevent keystrokes echoing to the display, and one to allow extended keystrokes (like the KEY_F(n)) to be seen when calling getch(); Change-Id: I495b42055a54603e4efb92b2845051434d88432d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1983 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-10libpayload: Fix use of virtual pointers in sysinfoNico Huber
In I4c456f5, I falsely identified struct cb_string.string as a pointer which it is not. So we don't need phys_to_virt() here. Change-Id: I3e2b6226ae2b0672dfc6e0fa4f6990e14e1b7089 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1987 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-12-10libpayload: Fix renaming of REG_CLASS_DEV to REG_SUBCLASSNico Huber
REG_CLASS_DEV was renamed to REG_SUBCLASS. Change-Id: I4af476b953b544f680337d815889564f016563eb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1986 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-12-08coreinfo: Make better calls to libpayload build scriptsMarc Jones
Set LPGCC and LPAS so that CC and AS are maintained. Clean up the makefile order to check for .config to be easier to read. Use objcopy instead of strip and keep the debug symbols file. Change-Id: I95d6b7a0e3a99a142d3fd6e2ecc61de1d4412402 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1994 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-08Clean up libpayload lpgcc and lpas scripts.Marc Jones
lpgcc and lpas are called by payload Makefiles to properly build and link with libpayload. Made lpas use the proper crosscompile AS, as lpgcc does with CC. Added V=1 support to help users debug the build. Fix basename $CC and $AS expansion. Change-Id: Ia4dc8ba53ba7565521a79f1520155f3307b09f85 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1993 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-07coreinfo: change the foreground/background colorsDave Frodin
The default curses library changed from tinycurses to PDCurses. PDCurses fails to fill the entire active screen with the assigned background colors when it writes 'blank' chars. This will allow the menues to look better until I resolve that. Change-Id: I70b5331d16dd0abaa1f0b02b725571844b7ac15e Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1984 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-07libpayload: Don't let USB/PC/serial keyboards overwrite each otherDave Frodin
Change-Id: I75c0066cf737e0cecac056487215622e2b3d4467 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-30Change TARGET_I386 to ARCH_X86David Hendricks
This renames TARGET_I386 to ARCH_X86 to make it more uniform with other parts of the codebase, e.g. cbfs_core.h from cbfstool. Change-Id: I1babcc941245ed1dde0478a21828766759373a42 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1961 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-11-30fix #if for target architecture in libpayloadDavid Hendricks
This bug was introduced when we copied cbfs_core.h from cbfsutil to libpayload. Change-Id: I9b5d00d0dbdb969644ce46ad6ac2a84b366b5cd7 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1958 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins)
2012-11-30libpayload: Remove unused FLAG_USED from memory allocatorNico Huber
The FLAG_USED bit in the memory allocator's header type was never read. This removes it to save one bit for the region size so we can have heaps of up to 32MiB. Change-Id: Ibd78e67d79e872d6df426516667c795fd52326d5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1942 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-30libpayload: Fix lookup by label in CMOS layoutsNico Huber
The condition to compare the labels was twisted. Change-Id: I34a665aa87e2ff0480eda0f249bbbea8a8fe68d8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1941 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-30Add multi-architecture support to cbfstoolDavid Hendricks
This is an initial re-factoring of CBFS code to enable multiple architectures. To achieve a clean solution, an additional field describing the architecture has to be added to the master header. Hence we also increase the version number in the master header. Change-Id: Icda681673221f8c27efbc46f16c2c5682b16a265 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1944 Tested-by: build bot (Jenkins)
2012-11-27libpayload: Add _ and + to USB HID keymapPatrick Georgi
Slightly more complete keymap Change-Id: I4fef6b8f75ab07cb20a3a8ccd7eaad81c9fe719f Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1922 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-24libpayload: Fix interrupt-queue cleanup for OHCINico Huber
We have to free TDs more carefully if they have been processed by the controller yet. The current code tries to force the controller to post them back to the done queue, but that seems wrong. We can't be sure, when they get written back. This resulted in leaking TDs with an invalid reference to a freed interrupt queue. The new approach: Mark the interrupt queue to be destroyed and handle the freeing later, when the controller posted the last TD to the done queue. Change-Id: I79d80a9dc89e1ca79dc125c4bbccbf23664227b3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1905 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-24libpayload: Rework connection state detection for OHCINico Huber
The connection state detection in the OHCI root hub driver was broken if you used more than one device per root hub. Change-Id: Ica5c735426beac45ef6f591ce68a72d8283a00f5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1904 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-24libpayload: Handle errors in UHCI interrupt queuesNico Huber
If somethings goes wrong during an interrupt transfer, drop the transfer. Change-Id: I450c08a7a0bf23fbee74237e0355d4a726ace114 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1901 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-24libpayload: Handle underruns in UHCI interrupt queuesNico Huber
If usb_poll() isn't called fast enough, the UHCI controller marks an underrun interrupt queue as done (terminating the queue at the head). We can recover from this situation, when usb_poll() gets called again, and the queue is processed. Change-Id: Id56c9df44d6dbd53cd30ad89dfb5bf5977799829 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1898 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-24libpayload: Implement correct interrupt-queue linking for UHCINico Huber
The linking of interrupt queues into UHCI controller's framelist (in uhci_create_intr_queue()) was incomplete. The implementation of uhci_destroy_intr_queue() was even worse, looking like it wanted to clean up more than uhci_create_intr_queue() did. This patch follows the simple approach that we used for OHCI and EHCI: Each slot in the framelist holds only one interrupt queue. Therefore, we have to look for free slots each time we want to link an interrupt queue into the framelist. In return, we have a much simpler structured framelist. With this, USB devices using interrupt transfers (e.g. keyboards) can be detached cleanly from UHCI controllers. Also, more than one of such devices can be attached without further risk. Change-Id: I07b81a3b6f2cb3ff69515c973b3ae6321ad969aa Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1897 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-23libpayload: Make USB HID support multiple keyboardsNico Huber
The USB HID driver had some static variables with keyboard state. This moves them to the driver's instance, so multiple attached keyboards don't effect each other. Change-Id: I3f1ccfdea95062b443cebe510abf2f72fdeb1916 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1907 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-23libpayload: ehci: Prevent some race conditionsNico Huber
Prevent race conditions, when an interrupt-queue underrun occurred and the controller is currently working on our queue head or a transfer is still in progress. Change-Id: Ia14f80a08071306ee5d1349780be081bfacb206a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1902 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-23libpayload: Detach devices behind removed USB hubsNico Huber
When a USB hub got removed, we should also remove all devices that were attached to it. Change-Id: I73c0da1b7570f1af9726925ca222781b3d752557 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1903 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-23libpayload: More compliant error recovery in USB MSCNico Huber
If an endpoint gets stalled by an MSC device, after successful transmission of a command (CBW), we should still ask for the status (CSW). Otherwise, the driver and the device get desynchronized on the command tags. Change-Id: I53167f22c43b3a237cb4539b3affe37799378b93 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1900 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-23libpayload: Reduce error output from EHCINico Huber
Stalled transfers are not fatal, so don't spew on the console on every tiny failure. Change-Id: I175c1e83a6af09c1abbd43d045ed6dbf0c79f871 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1899 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-23libpayload: Fix random warningsNico Huber
dump_td() is orphaned but looks useful => commented out. The delay identifier shadowed the global one => renamed to total_delay. Change-Id: I4f3766a07db9194b2552ebf9302bd7ef8a66371f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1895 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-23libpayload: ehci: Fix warnings about discarded volatileNico Huber
We can trust free() and memset() to work correctly on volatile references, so cast volatile pointers to (void *) when calling them. Change-Id: Ieff7f78133b72f303349cca0a0ca3bbf37ec52bb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1896 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-23libpayload: Fix some missing-prototype warningsNico Huber
usb_controller_initialize() is not declared in any header file nor called from outside of usbinit.c, so make it static. set_configuration() looks like beeing non-static on purpose (like the other helpers around it in usb.c), so put a prototype into usb.h. Change-Id: I08d93b3769d8398bb43462d9afdfeec81fef93ec Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1894 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-23libpayload: Fix memalign() for fragmented alignment regionsNico Huber
Found a bug in the memory allocator ;-) If the total free space in an alignment region is large enough for an allocation but fragmented, such that there is no contiguous, sufficient large, free space in the region, memalign() was looking at the same region again and again in an endless loop. The advancing to the next region was just missing. Change-Id: I3fad833804675ee495577ca2749b007f46b5ff69 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1906 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-19Add nvramcuiPatrick Georgi
nvramcui is a small libpayload based utility that provides an interactive CMOS editor for pre-boot environments. Change-Id: I514b8a7682f89d242d1b31b6907cc6bff34da4bf Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1871 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-15libpayload: Always use virtual pointers in struct sysinfo_tNico Huber
We had mixed virtual and physical pointers in struct sysinfo_t. Some being virtual by accident which led to problems when we tried to reinitialize lib_sysinfo after relocating FILO (to get intentionally virtual pointers valid again). I guess this didn't cause much trouble before, as lib_get_sysinfo() was always called with physical addresses being equal to their virtual counterparts. For FILO, two possibilities seem practical: Either, have all pointers in struct sysinfo_t physical, so relocation doesn't hurt. Or, have all pointers virtual and call lib_get_sysinfo() again after relocation. This patch goes the latter way, changing the following pointers for situations where virtual pointers differ from physical: .extra_version .build .compile_time .compile_by .compile_host .compile_domain .compiler .linker .assembler .cb_version .vdat_addr .tstamp_table .cbmem_cons .mrc_cache We could also just correct the accidentally virtual pointers. But, IMO, this would lower the risk of future confusion. Note 1: Looks like .version gets never set. Note 2: .option_table and .framebuffer were virtual pointers but treated like physical ones. Even in FILO, this led to no problems as they were set before relocation. Change-Id: I4c456f56f049d9f8fc40e62520b1d8ec3dad48f8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1855 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-15libpayload: Use #ifdef for CONFIG_* checksNico Huber
Libpayload uses the linux kernel's config style, where CONFIG_* defines don't get written for unset tristates. Change-Id: I3f832cf86bca9a1e153d96af4bf6434a19eba2f6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1847 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-14libpayload: Add init() function to hci_t and rework uhci_reset()Nico Huber
uhci_reset() differs in semantics compared to the other HCI's reset() implementations. uhci_reset() does some initialization work after a controller reset. So move the initialization part to a new function, uhci_reinit(), which get's exported through a new entry in hci_t: hci_t.init(). Warning: This breaks code that relies on the current, special, counterintuitive behaviour of uhci_reset(). If one wants a working host controller after calling hci_t.reset(), he should call hci_t.init() afterwards. Change-Id: Ia7ce80865d12d11157645ce251f77f349f8e3c34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1851 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Do not call ohci_reset() from ohci_init()Nico Huber
When ohci_reset() was implemented, OHCI controllers stopped working since the stub ohci_reset() is called at the end of ohci_init(). This is fixed by removing the call. To prevent further problems the call to the xhci_reset() stub is removed, too. Change-Id: If89825c8e6caf40f7f4fe078e8b2e90054a54ba2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1850 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Free usb host controller instance after shutdownNico Huber
All shutdown() implementations but ehci_shutdown() free the hci_t structure. This seems correct and the reference to the hci_t shouldn't be used after shutdown(), so do it in ehci_shutdown(), too. Change-Id: Ie3506d769e73007735f3211710734a5f0107e43a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1849 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Document USB host controller setup functionsNico Huber
The semantics of the controller functions, start(), stop(), reset() and shutdown(), are not self-explanatory which let to some confusion. At least the reset() functions of the different host controller drivers were implemented following different interpretations. Let's make the intended behaviour of these functions clear. The stated inconsistencies will be addressed in following commits. Change-Id: Id2e300f65c21039218b6ba3f87c0fcd4f0dda0a8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1848 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Export device count in storage interfacePatrick Georgi
FILO can use this as offset to enumerate AHCI and its own IDE devices together. Change-Id: I57380e7bd1df6db5c882427e9a34d068f4348fb2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1846 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12libpayload: Use EXTRA_CFLAGS for additional GCC optionsGabe Black
-CFLAGS = $(INCLUDES) -O2 -pipe -g +CFLAGS = $(EXTRA_CFLAGS) $(INCLUDES) -Os -pipe Change-Id: Icb228d173312a974746e72b6bbae059103b837fc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1723 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Add an option to skip console initialization on startup.Gabe Black
A payload may want to decide whether it uses certain input/output consoles, or that it wants support for outputing to a particular device but not to use that device as a console. This change adds a config option which skips the call to console_init in start_main. Change-Id: I32b224d4d0bd3a239b402ecb09ee907d53225735 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1732 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09libpayload: Add CB_ prefixes to some constants in coreboot_tables.h.Gabe Black
This makes their names more consistent with other constants in this header, avoids name collisions, and makes it more obvious where the names came from. Change-Id: I7b8bd4ada0fbaf049f35759a907281265f5bb2e6 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1729 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09libpayload: Change "GPIOs" into flags.Gabe Black
Some constants which were used to interpret the contents of the coreboot tables were moved to the appropriate libpayload header file. The constant which describes the maximum length of a GPIO name was renamed to have a CB_ prefix. That makes it more obvious what sort of GPIO name it describes, and reduces the change of a name collision. It also makes it more consistent with other names in that header, although some other exceptions still exist. Change-Id: I6c0082b3198d34e8a78507fbfac343ee8facf0dc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1728 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09[PATCH] libpayload: Implement EHCI reset functionAnton Kochkov
Added ehci_reset() function to do a full reset of the host controller Change-Id: Ia48db8462ebbb8f260813eb6ba8349d002c4678b Signed-off-by: Anton Kochkov <a.kochkov@securitycode.ru> Reviewed-on: http://review.coreboot.org/1814 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Add a function to retrieve the rows and cols of the video console.Gabe Black
This is useful if you need to put some text in a particular place on the screen, for instance in the middle. Change-Id: I3dae6b62ca1917c5020ffa3e8115ea7e8e5c0643 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1734 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Separate video initialization and the video console.Gabe Black
It's possible to want to display text on the display without using it as a console. This change separates the initialization of the video code from setting up the video console by pulling out everything but installing the console into a new function called video_init. Change-Id: Ie07654ca13f79489c0e9b3a4998b96f598ab8513 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1733 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Add support for the CBMEM in memory console.Gabe Black
Change-Id: I1489b5306ef1ca078686fed4dba2d242f70ad941 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1727 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Refactor the endianness conversion functions and header files.Gabe Black
The endianness of an architecture is now set up automatically using Kconfig and some common code. The available conversion functions were also expanded to go to or from a particular endianness. Those use the abbreviation le or be for little or big endian. Built for Stumpy and saw coreinfo cbfs support work which uses network byte order. Used the functions which convert to little endian to implement an AHCI driver. The source arch is also little endian, so they were effectively (and successfully) inert. Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Update libpayloads understanding of the coreboot tables.Gabe Black
Give it somewhere to put the new info in sysinfo, and tell it how to parse the new tables which it doesn't yet understand. Change-Id: I01d3318138696e6407553c27c1814f79e3fbc4f8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-07libpayload: Turn the "debug" #define into the usb_debug static inline function.Gabe Black
The "debug" macro used internally in the libpayload USB subsystem was very generically named and would leak into consumers of the library that included usb.h directly or indirectly. This change turns that #define from a macro into a static inline function to move away from the preprocessor, and also renames it to usb_debug so it's less likely to collide with something unrelated. Change-Id: I18717df111aa9671495f8a2a5bdb2c6311fa7acf Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1738 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Take usb_poll out of usb_initialize.Gabe Black
While it might be slightly more convenient to not have to call usb_poll manually after calling usb_initialize, you'll still likely want to call it before trying to use a USB device since one have have been hotplugged since you last looked. By not calling usb_poll, usb_initialize completes quickly and can be called unconditionally without a long delay. The delay can be put off until later when we're sure it's necessary. Change-Id: Ib8b1bdea996702c42d1b7021f492d9f8e174d304 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1737 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Make usb_initialize more efficient and fix style problems.Gabe Black
The usb_initialize function would scan for USB host controllers by brute force iterating over all possible busses, devices, and functions. This change makes it recursively scan busses only if it finds them on the other side of a bridge, and only scan for functions beyond function 0 if the device claims to be multifunction. This change also takes the opportunity to clean up some style problems throughout the file. Change-Id: I0f5e8b9a454a42a76d30bccca898c8e1af770b2b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1736 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Add definitions for more config space registers.Gabe Black
Change-Id: I02cf353ce7c955cb11ca11c0d5b8aa630cf15fdb Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1735 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Add the format attribute to functions in stdio.h.Gabe Black
gcc recognizes the format function attribute which tells the compiler to expect the format string to look a certain way and for its arguments to be of appropriate types. This helps to prevent errors like the one that was recently fixed in libpayload's assert. Change-Id: I284ae8bff32f72cfd2d1a250d126c729b38a5730 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1731 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Fix the format string of the assert macro.Gabe Black
The assert macro in libpayload was using a format string which printed the line number with %s. The line number came from the __LINE__ predefined macro which resolves to an integer constant. Change-Id: I0e00d42a1569802137cf440af3061d7f397fdd27 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1730 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Add faster, architecture specific versions of memset and memcpy.Gabe Black
Change-Id: I0f3a82de860fd3afa10a557b37fb90fe6b06ae90 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1726 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Make the symbols in memory.c weak so they can be overridden.Gabe Black
The implementations for various stdlib functions in libc/memory.c are very generic and should work under just about any circumstances. They are unfortunately also very slow. This change makes them weak symbols so that faster versions can be defined on a per architecture basis which will automatically take the place of the slow versions. Change-Id: Ia1ac90d9dcd45962b2a15f61ecc74b0a4676048d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1725 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Update the way serial info is read from the coreboot tables.Gabe Black
This information is now stored in a structure instead of in a few seperate fields. libpayload hadn't been updated to reflect the new layout or to consume the new information intelligently. Change-Id: Ice3486ffcdcdbe1f16f9c84515120c591d8dc882 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1724 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Move the definition of ipchksum into its own header file.Gabe Black
Change-Id: Ifb7c18f9ca566bd50ca138ffd8af951375089537 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1722 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Discard .note sections when linking.Gabe Black
These end up being loaded at 0 otherwise and overwrite some coreboot tables. Built and booted on Stumpy. Saw that the coreboot tables were no longer overwritten. Change-Id: Ia9f521d976d0ad544a8205323ae0ddfa8d253d29 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1721 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07Include stdint.h in libpayload's rdtsc.h.Gabe Black
This file uses uint*_t types but hadn't included stdint.h itself. Change-Id: Ib883f62951bae1ece5134c6bd0f4799a80740e8e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1720 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-10-27libpayload: New AHCI, ATA and ATAPI driversNico Huber
This adds a new interface for storage devices. A driver for ATA and ATAPI drives on AHCI host controllers comes along. The interface is very simple and was designed to match FILO's needs. It consists of three functions: void storage_initialize(void); Initializes controllers. Should be called once at startup. storage_poll_t storage_probe(size_t dev_num); with typedef enum { POLL_NO_DEVICE = -2, POLL_ERROR = -1, POLL_NO_MEDIUM = 0, POLL_MEDIUM_PRESENT = 1, } storage_poll_t; Looks for a drive with number dev_num (drives are counted from zero) and polls for a medium in the drive if appropriate. int storage_read_blocks512(size_t dev_num, u64 start, size_t count, unsigned char *buf); Reads count blocks of 512 bytes from block start of drive dev_num into buf. Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-16Update SeaBIOS stable to the release-1.7.1 commitPeter Stuge
Change-Id: I0dffe89c31e45914f795d9ad8efb787b5fdbb7a8 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1583 Tested-by: build bot (Jenkins)
2012-10-14libpayload: CMOS access was implemented in a backward wayPatrick Georgi
Instead of having the highlevel functions make use of the lowlevel functions, it implemented the lowlevel stuff in terms of highlevel. Change-Id: I530bfe3cbc6f57a6294d86fbf1739e06467a2318 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1539 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-08Increment revision of SeaBIOS to remove bashismStefan Tauner
This enables building with dash again(?) by using exactly one patch of SeaBIOS more/newer than previously, which has also the sole purpose of removing bashism and is a single line change. *sigh* Change-Id: Ib036894d8b9886f74d6eb0853f1fc0ce1aa39d54 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1568 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-10-03libpayload: Set 8bits per char for serial portAnton Kochkov
Previously we assume that hardware using 8 bits per char by default, but on Asrock A53 Pro this is not true (7 bit per char by default). Forcing use 8n1 now. Change-Id: Ib701725d2ec6dacd7862016b2045270956b27029 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1541 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-03libpayload: UHCI driver contained too much magicPatrick Georgi
The handling of finalize in uhci_bulk was confusing, and so its behaviour changed. If set, the driver is supposed to add a trailing empty packet iff the last packet is of maximum packet size. This helps the device to decide if the transfer is completed simply by waiting for a packet that isn't full length. Change-Id: I162e8c1e034924d0de6fdcb971c94cf3a5ea31eb Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1555 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-01libpayload: fix for UHCI bulk transactionsAnton Kochkov
Fixed masking to run QH shedule. Fixed final zero filled TD generation for UHCI bulk transaction. Change-Id: I9c6ea34d132368922f2eeeaa7aadbbb6aac3e2b8 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1553 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>