summaryrefslogtreecommitdiff
path: root/payloads
AgeCommit message (Collapse)Author
2014-08-12libpayload: ehci: Set explicit terminate bits in dummy_qh next pointers.Julius Werner
The EHCI host controllers in Samsung Exynos SoC seem to be a little more picky than Intel ones. When they reach the dummy_qh in the periodic frame list, they try to access the next qTD pointer even though it's NULL, and run into a HostSystemError. This patch explicitly sets the Terminate bit on those pointers to mark them invalid. Change-Id: I50fa79bbf1c5fab306d7885c01efd66b13e279b8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/66884 Reviewed-by: Vincent Palatin <vpalatin@chromium.org> (cherry picked from commit c575a5c958ce88732d28044352c89418bcd5ea86) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6608 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12libpayload: Make USB transfer functions return amount of bytesJulius Werner
The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-11libpayload: xhci: Use Event Data TRBs for transfer event generationJulius Werner
The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10LZMA: Add a version of ulzma which takes the input and output buffer sizes.Gabe Black
This new version is used to implement the version which doesn't take the input and output buffer sizes. Old-Change-Id: I8935024aca0849bc939263d7fc3036c586e63c68 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65510 Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 465d167ad2f6a67d0b2c91fb6c68c8f9a09dd395) libpayload: Make lzma truncation non-fatal. If the size the lzma header claims it needs is bigger than the space we have, print a message and continue rather than erroring out. Apparently the encoder is lazy sometimes and just puts a large value there regardless of what the actual size is. This was the original intention for this code, but an outdated version of the patch ended up being submitted. Old-Change-Id: Ibcf7ac0fd4b65ce85377421a4ee67b82d92d29d3 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/66235 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 30c628eeada274fc8b94f8f69f9df4f33cbfc773) Squashed two related commits and updated the commit message to be more clear. Change-Id: I484b5c1e3809781033d146609a35a9e5e666c8ed Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6408 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-10cbfs: Fix overwalk on file scanSteven Sherk
A bootblock overwalk was occuring when deriving the actual length, the bootblock size was not taken into account and bootblock size was not aligned. Resolved merge conflict. Change-Id: I7eb42f8deaaf223dcf07b37bb7dde4643acd508f Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65989 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Steve Sherk <ssherk70@gmail.com> Tested-by: Steve Sherk <ssherk70@gmail.com> (cherry picked from commit 20b0ba479b01755fbdc7f3dd9214e8af923402ba) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6539 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-10coreboot_tables: reduce redundant data structuresJulius Werner
There are three coreboot table tags that all define some kind of memory region, and each has their own homologous struct. I'm about to add a fourth so I'll just clean this up and turn it into a generic struct lb_range instead. Change-Id: Id148b2737d442e0636d2c05e74efa1fdf844a0d3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167154 (cherry picked from commit 22d82ffa3f5500fbc1b785e343add25e61f4f194) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6456 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-10armv7: Support stack dump after exceptionsJulius Werner
This patch enhances the armv7 exception handlers in Coreboot and libpayload to show the correct SP and LR registers from the aborted context, and also dump a part of the current stack. Since we cannot access the banked registers of SVC mode from a different exception mode, it changes Coreboot (and its payloads) to run in System mode instead. As both modes can execute all privileged instructions, this should not have any noticeable effect on firmware operation (please correct me if I'm wrong!). Change-Id: I0e04f47619e55308f7da4a3a99c9cae6ae35cc30 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170045 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Vincent Palatin <vpalatin@chromium.org> (cherry picked from commit d0db2f5e938200e3f5899c5e1f1606ab2dd5b334) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6538 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10libpayload: hexdump.c: Change type of length argument to size_tPaul Menzel
Representing a (non-negative) length with a signed integer is not optimal, so change its type to `size_t`. Change-Id: Ic0c2b7e081ba32d917409568ee53007d9ab7f8f3 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-10serial: Separate the serial hardware init and the serial console init.Gabe Black
You might want to use the serial hardware for something other than a console, or you might want to intercede in the serial stream to wrap it in another protocol. This is what you'd do to send output to GDB while using it to debug the payload. Change-Id: I2218c0dbb988dacb64e5bdaf5d92138828eff8b6 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/179559 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit da9ab46d974745125fe7d8b29ce43336c3586cd5) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6547 Tested-by: build bot (Jenkins)
2014-08-09Set check-lxdialog.sh mode properlyVadim Bendebury
This script is used by 'make menuconfig', but being non executable it fails to run, causing the make invocation failure. Setting 'x' mode bits fixes the problem. Change-Id: I925ca4ee056937b6c38ad34f5520fd621f9d9eb0 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173564 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 3ddb9d221ecc3df968853d765b566cf0648a7525) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6540 Tested-by: build bot (Jenkins)
2014-08-05libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig.Gabe Black
When libpayload header files are included in the payload itself, it's possible that the payloads config settings will conflict with the ones in libpayload. It's also possible for the libpayload config settings to conflict with the payloads. To avoid that, the libpayload config settings have _LP_ (for libpayload) added to them. The symbols themselves as defined in the Config.in files are still the same, but the prefix added to them is now CONFIG_LP_ instead of just CONFIG_. Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65303 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6427 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-08-01armv7: add wrapper for DCCSW (data cache clean by set/way)David Hendricks
This adds a wrapper for data cache clean (without invalidate) by set/way. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I09ee1563890350a6c1d04f1b96ac5d0c042e2af2 Reviewed-on: https://gerrit.chromium.org/gerrit/66118 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit 05bc4f8564c547eacb9cc840a03b916b3c1c6001) armv7: clean but do not invalidate caches between stages This cleans the caches without invalidating them between stages. The dcache content should still be valid when the next stage begins, so we should see a small performance gain. (thanks to gabeblack for pointing this out) Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: Ie18d163f3a78e2786e9fbc7479c8bd896b8ac3aa Reviewed-on: https://gerrit.chromium.org/gerrit/66119 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit 619bfe4cf9b93847e38d03d7076beb78fbfa1d1d) armv7: Make coreboot and libpayload cache files the same This merges the difference between the ARM version of cache.c and cache.h for libpayload and coreboot. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I246d2ec98385100304266f4bb15337a8fcf8df93 Reviewed-on: https://gerrit.chromium.org/gerrit/66120 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit 0c92f694034f1e94a8aa7811251738c9dc3db2c6) ARM: Fix cache cleaning operation. There was no behavior defined for OP_DCCSW in dcache_op_set_way, so it silently did nothing. Since we started using that to clean the cache between stages and I have a change that enables caches earlier on, this was preventing booting on pit. Old-Change-Id: I3615b6569bf8de195d19d26b62f02932322b7601 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/66234 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 99241468cb9dcc86fcca9266ffe72baa88a1f79f) libpayload: Fix data cache cleaning on ARM. A similar fix was made to coreboot where OP_DCCSW was silently not doing anything in dcache_op_set_way. Old-Change-Id: Ia0798aef0cd02da7d1a14b7affa05038a002ab3b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/66236 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 6f6596a182a6780a2e997ac320733722697990c5) Squashed five related commits. Change-Id: I763d42bd5dd9f58734e1e21eb7c8ce3ce2ea56ee Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6418 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-31payloads/external/SeaBIOS: Use coreboot’s serial console settingsMartin Roth
Set up the serial console on SeaBIOS to match coreboot's settings. Previously, we were just forcing it on, and setting it to 0x3f8. Change-Id: I107245c8bd1ba2cf948c6671337c6169226aaaaf Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6363 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-31payloads/external/SeaBIOS: Update makefile for olddefconfigMartin Roth
Instead of creating the SeaBIOS .config file for QEMU, then changing things to be coreboot specific, create a default config for coreboot, then run olddefconfig to use the SeaBIOS defaults as they're set for coreboot. This leads to a cleaner config. Note that CONFIG_THREAD_OPTIONROMS defaults to enabled for SeaBIOS if we're building for coreboot, so I reversed the logic. I *ASSUMED* that leaving CONFIG_QEMU_HARDWARE=y and CONFIG_DEBUG_IO=y previously was an oversight. If this is not correct, please let me know and I'll add them it back in. SeaBIOS disables these by default if building for coreboot. Change-Id: I42c6a56205bb15c6693a5f3a716b7876a4d78abe Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6362 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-31libpayload: provide missing cbfs symbolAaron Durbin
The generic cbfs code relies on the libpayload_init_default_cbfs_media symbol. However, none was provided for ARM. Provide an empty implementation that returns an error as there is no generic way to locate the default cbfs media. Old-Change-Id: Ie0d06fbe6fc790c9d92434cd2d60922908acdc69 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56805 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit d3410c28ef9f37b832e2fa2d18351dda332bc9f7) libpayload: place dummy_media.c in correct object list The commit introducing dummy_media.c was placed in the libc object list. This wasn't correct. It should be in the libcbfs object list as well as guarded by CONFIG_CBFS. Old-Change-Id: Iace43fff8f85f60ecac5e6eb8350cd1f3ee9d35e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56925 (cherry picked from commit 7937c7c5e95a934593bc0cedd5f4496b4770c303) Squashed two related commits. Change-Id: I84cd132b44cc2ea5b29acf109a3562baaeede9c6 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6411 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-12libpayload: find source of input charactersLuigi Semenzato
This change makes it possible for vboot to avoid an exploit that could cause involuntary switch to dev mode. It gives depthcharge/vboot some information on the type of input device that generated a key. BUG=chrome-os-partner:21729 TEST=manually tested for panther BRANCH=none CQ-DEPEND=CL:182420,CL:182241,CL:182946 Change-Id: I87bdac34bfc50f3adb0b35a2c57a8f95f4fbc35b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://chromium-review.googlesource.com/182357 Reviewed-by: Luigi Semenzato <semenzato@chromium.org> Tested-by: Luigi Semenzato <semenzato@chromium.org> Commit-Queue: Luigi Semenzato <semenzato@chromium.org> Reviewed-on: http://review.coreboot.org/6003 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-12mainboard: Add new board Google PantherMohammed Habibulla
(Panther clone of Ia41af8425ab6c24746253abd025acd3365dd5a18 by reinauer) BUG=chrome-os-partner:23563 TEST=emerge-panther chromeos-coreboot-panther [pg: Drop configs/, which is chromeos stuff, adapted libpayload's config.panther to work with upstream] [pm: Add HAVE_IFD_BIN and HAVE_ME_BIN Kconfig options] [pm: rebase to master branch of coreboot upstream] [md: don't use FMAP to get MAC address if CONFIG_CHROMEOS not set] Change-Id: I50fd5c02da154e424dfefbe2020f4ce7ef9a4f8f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://chromium-review.googlesource.com/174555 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Mohammed Habibulla <moch@chromium.org> Tested-by: Mohammed Habibulla <moch@chromium.org> Reviewed-on: http://review.coreboot.org/5990 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-10libpayload: Drop obsolete setting of reg_base in [oex]hciNico Huber
Setting of `controller->reg_base` is of no use here, as it is never read (in another function) later. Looks like this pattern originated from uhci.c where it makes sense. By removing the indirection through `reg_base` we also fix a possible truncation to u32. Change-Id: I5c99c5bf1f5b1d6c04bd84d87fd3e275fd7d0411 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6251 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-10libpayload: Catch null-pointer dereference in xHCINico Huber
Fix a possible null-pointer dereference (hopefully) before anyone runs into this. Also don't switch ports to xHCI if initialization failed. Change-Id: I5dbaeb435a98ead0b50d27fde13c9f1433ea3e81 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6245 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-10libpayload: xHCI: Always initialize controller->pcidevNico Huber
As the controller structure is never fully cleared, this one wasn't initialized for non-pci controllers (but checked for non-null later). Change-Id: I852671c5f55650bdb6cd97f4ec74b1f95ee894c7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6246 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-10libpayload: Use unsigned long for BARs in *hci_init()Nico Huber
Using void* for physical addresses leads to much casting and confuses developers when to convert from physical to virtual addresses or the other way around. When using plain integers for physical addresses and pointers for virtual addresses things become much cleaner and we won't ever end up dereferencing a physical address. Change-Id: I24cd53b81c7863b6d14f0cbb4ce8937728b37c1c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6244 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-10libpayload: Keep physical addresses in console driversNico Huber
Like done in FILO, libpayload's console drivers might be initialized before a relocation. So keep physical pointers in there which won't break on relocation. Change-Id: I52e5d9d26801a53fd6a5f3c7ee03f61d6941d736 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6247 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-10libpayload: Remove redundant phys_to_virt() from xHCI driverNico Huber
Remove a redundant phys_to_virt() that sneaked in the initialization of PCI xHCI controllers. The use of casts from void* to u32 (and vice versa) prompts for things going wrong here. That will be addressed in a later commit. Change-Id: Ibc71ed6ee7016529c0e3a51559aaec07aaaba315 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6243 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-28payloads/external/SeaBIOS: Upgrade stable from 1.7.2.1 to 1.7.4Paul Menzel
SeaBIOS 1.7.4 was released in December 2013 [1] and, besides other things, supports writing debug messages to CBMEM console. The new SeaBIOS Kconfig option `DEBUG_COREBOOT` has to be added to the SeaBIOS configuration file `.config` as otherwise the SeaBIOS build from within coreboot (`PAYLOAD_SEABIOS`) is interrupted as it is detected as a new option. This option was already added and enabled in commit 7c1a49bc [1] SeaBIOS: have coreboot pass the choice to run optionroms in parallel so SeaBIOS messages are now written to the CBMEM console. Successfully tested on the Asus M2V-MX SE. [1] http://seabios.org/Releases [2] http://review.coreboot.org/5443 Change-Id: I675a50532735b4921a664e4b24d98be17b9a1002 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5093 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-23payloads/coreinfo/multiboot_module.c: Trivial fix indentsEdward O'Callaghan
Stylistic fix-up's. Change-Id: I0cad7c860280d0d8dcb16d052846c72f690e2b65 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5731 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-17libpayload: Fix to properly disable serial consoleKyösti Mälkki
With coreboot builds with serial console disabled, there is no CB_TAG_SERIAL entry in coreboot tables. We ended up with lib_sysinfo.serial == NULL and serial_hardware_is_present == 1. Change-Id: I9a2fc0b55bf77769f2f2bfbb2b5476bee8083f7d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5723 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-09payloads: make build system integration work againPatrick Georgi
Payloads using Kconfig get confused by coreboot Kconfig configuration in environment variables. Prune them. Change-Id: I63da2af0a15dca35d70cd65b2f74a1564aab9483 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5710 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-09payloads/coreinfo/README: Use `It is` instead of `Its`Paul Menzel
Change-Id: Ic1a9f2f01c26ee97cd7183fcf1755cb916f1b02e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5704 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26libpayload/endian.h: Provide alignment-agnostic enc/dec bytestreams.Edward O'Callaghan
Alignment-agnostic encode/decode bytestream to/from little/big endian. The le16enc(), le16dec(), le32enc(), le32dec() functions encode and decode integers to/from byte strings on any alignment in big/little endian format. See BYTEORDER(9). Change-Id: I73a174b9c02c467bc60590c5cd894dac58b8683a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5198 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-16filo payload: Fix the buildPatrick Georgi
Also strip down the config that's set since these are actually SeaBIOS options, not FILO... Change-Id: I5dbe6255996f9e115699ff2a83fb3450533520ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4647 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-07SeaBIOS: have coreboot pass the choice to run optionroms in parallelIdwer Vollering
Introduce the tunable CONFIG_SEABIOS_THREAD_OPTIONROMS. Change-Id: Ifd4d9fca7316eb739ff184e54bdc1cdb0262f0c6 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/5443 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-15libpayload/ahci: Fix a warning by decompartmentalise the AHCI driver.Edward O'Callaghan
Decompartmentalise AHCI driver into two parts, ATA and ATAPI. Add a few superficial comments while here. This also fixes a compiler warning. Change-Id: Ia1fd545b39868a81cbc311f6ffc786f9f1f61415 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4783 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-30libpayload: Parse CBMEM ACPI GNVS pointerDuncan Laurie
Pull the ACPI GNVS pointer from CBMEM and expose it in the sysinfo structure for use by payloads. BUG=chrome-os-partner:24380 BRANCH=none TEST=build and boot rambi with emmc in ACPI mode Change-Id: I47c358f33c464a4a01080268fb553705218c940c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179900 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5016 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-28libpayload: adjust max number of memrangesAaron Durbin
Rambi currently has more than 16 memory ranges. Because of this libpayload is silently dropping them and the full amount of memory is not being properly wiped. Correct this by bumping the number of ranges to 32. BUG=None BRANCH=None TEST=Built and booted rambi. Noted that the full amount of memory was being properly wiped. Change-Id: Ida456decf2498cb1547c0ceef23df446a975606b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175792 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4942 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-01-26Revert "Makefile: Check $CC variable returned from xcompile is not empty."Alexandru Gagniuc
This reverts commit 1287d1cc80c52ff2598f2bae235fc42d8456f44a. This commit has the side-effect of making abuild fail, and as such is reverted until a safe solution can be found. Change-Id: Ib8cb78468c2922322b490e0b52c0bd24f3de7ef9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3269 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-01-23Makefile: Check $CC variable returned from xcompile is not empty.Andrew Wu
If xcompile can't find out suitable GCC compiler for i386/armv7, it will not set $CC_i386/$CC_armv7 variable. Makefile sets $CC variable from xcompile, and will print strange error messages when executing $CC program if $CC is empty. Add checking to avoid this problem. If $CC is empty, also delete invalid .xcompile file, so Make can recreate this file next time. Change-Id: Ia8d481d76ca52f3351cb99f05779d06947161c5d Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3905 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-19nvramcui: Trim values when setting.Vladimir Serbinenko
Values get space-padded by curses and then enum search fails to match them. Rtrim to compensate for curses. Change-Id: Iecf095f21cfade9425eaa039b67625615eb80481 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4692 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2014-01-19libpayload/lpgcc: Add curses include path.Vladimir Serbinenko
Without it payloads that need curses fail to build. Change-Id: I4533238b547e4c2d9e0778fb7d314db35a9559df Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4689 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-01-19libpayload/options: Fix out of array read.Vladimir Serbinenko
It resulted in garbage in upper bytes of numeric options. Change-Id: I5e5d8b770ed93c7e8a1756a5ce32444b6a045bac Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4691 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-01-19libpayload: Bring keyboard_wait_write() backPatrick Georgi
Code is using it... Change-Id: I6894b45cbbf70c8e7ce37ce18d93cadf0ea9fbfc Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4649 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-01-12lib/cbfs_core.c: Supply size of file as well in cbfs_get_file_contentVladimir Serbinenko
Change-Id: I5b93e5321e470f19ad22ca2cfdb1ebf3b340b252 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4659 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-01-08libpayload: add junit.xml build targetPatrick Georgi
It builds all defconfigs/* and logs the results in junit.xml, suitable for consumption by jenkins Change-Id: I86c4022851b47820c95359b2ea9b735a77b1bc2c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4551 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-08libpayload: update defconfigPatrick Georgi
Just clean out stuff we don't even have anymore Change-Id: I2b4128c6496b4400d52d87680bedc3cece3d444c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4550 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-08libpayload: reintroduce optional PCI in XHCI driverPatrick Georgi
being a good citizen on the box, libpayload tries to return to EHCI mode on shutdown, so a non-XHCI capable USB driver after it (eg. in the OS) finds something to work with. Change-Id: Id227d646e08a258b841c644263112f0815dd486c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4547 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-21armv7: add wrappers to read/write L2ACTLRDavid Hendricks
This adds inline wrappers to read the L2 cache auxiliary control register (L2ACTLR). Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Iec603d7c738426232f7ce3a4a474d01c85fa3f2f Reviewed-on: https://gerrit.chromium.org/gerrit/64861 Commit-Queue: David Hendricks <dhendrix@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4437 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21arm: libpayload: Include stdint.h in cache.hGabe Black
The cache.h header uses standard int types but doesn't include stdint.h itself. Change-Id: If470978164b0cd1f05c27c2c8eda365133cc47ff Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63190 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4387 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Libpayload: Add keyboard-disable function.Martin Roth
Add a function to disable and clear the keyboard controller. Verified Code flow in normal boot/S3 resume with print statements. Verified Keyboard was correctly disabled and flushed by booting to recovery mode screen while pressing keys on the integrated keyboard. Change-Id: I3e1f011c3436fee5ce10993c6c26a3c8597c6fca Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63627 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4395 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21libpayload: Include hexdump.c in the Makefile so it gets builtGabe Black
The hexdump function was added to libpayload recently, but its source file was never added to the Makefile so it wasn't compiled or linked in. Change-Id: Ic3c12a5b8a6ea631b83c10a6e4210544ff00b5bf Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64878 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4439 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21libpayload: Increase USB EHCI transfer timeoutJulius Werner
The EHCI driver defines a maximum transfer timeout of two seconds. The comments state that during tests the maximum amount of required transfer time was for the SCSI TEST_UNIT_READY command on certain devices. We have now observed a USB device (Patriot Memory 13fe:3100) that can NAK this command for slightly more than two seconds. It will also completely fail if the timeout hits, since it gets confused by the subsequent CSW retry/recovery mechanism and starts producing babble errors. This patch increases the timeout to three seconds to circumvent this problem. To test, boot a Falco from a red-black RageXT USB stick. Change-Id: I3c4fef468fb16eacc5a487d76d025a78fb450e27 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63095 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sameer Nanda <snanda@chromium.org> Reviewed-on: http://review.coreboot.org/4379 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-16libpayload: Add simple hexdump functionRonald G. Minnich
- prints hex and ascii - detects duplicate all zero lines Change-Id: I084b3072bc05725b23c5c3ca0dbf1533f164a08c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63660 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Author: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/4393 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-12-12libpayload: expose cbfs ram functionsAaron Durbin
The ram_media.c file is being compiled, however the global functions were not exposed through a header. Change-Id: I4588fbe320c29051566cef277bf4d20a83abf853 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56642 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4194 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12libpayload: Get rid of a compiler warningGabe Black
Change-Id: I7252925ef5c4efb69cad6b6fa179031162cf8e74 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61058 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4346 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12libpayload: armv7: Add cache control function to invalidate range.Hung-Te Lin
When dealing with DMA, we need a function to invalidate cache without corrupting contents on main memory (clean). Change-Id: I28e632ae57a7b7ed1accee74e76045b92f92a699 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61078 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4345 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12payload: armv7: Fix dcache_clean_by_mva.Hung-Te Lin
The OP assigned by dcache_clean_by_mva must be handled in dcache_op_mva. Change-Id: Ib32262f0419453b2690d7c1a1c6602380b46a37f Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61077 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4344 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-06Do not export variables to GRUB buildVladimir Serbinenko
Variables in coreboot and not in line with GRUB ones. E.g. HOSTCC is both HOST_CC and BUILD_CC for GRUB (consult INSTALL for more details) and what coreboot calls CC is TARGET_CC for GRUB. Current code plugs this by defining variables explicitly but it has a nasty effect that make stops caring about flags added in makefile itself. Undef as many variables as possible but still pass them to configure for them to have correct effect and keep CC assignment as my make version doesn't undefine it even when instructed to do so. Tested with qemu. Change-Id: I9d18f557138a20ae3918d698dee8f5b5c5738f75 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4310 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-05libpayload: Have similar cache api on ARM and x86Stefan Reinauer
So far this is used by the USB driver, and instead of having ifdefs all throughout that code, implement the same API on x86 and ARM. Change-Id: I8093ad818ad2e38a0901787aa8674faf591d580c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56105 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4320 Tested-by: build bot (Jenkins)
2013-12-05libpayload: Clean up CFLAGSStefan Reinauer
- Add -ffreestanding and -fomit-frame-pointer for all platforms. - Add ARMv7 specific flags to the armv7 Makefile Change-Id: I71ab1b096e505940cc20c266bccd43917bcfad3a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56104 Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4317 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-05libpayload: sync ARMv7 arch/io.h with corebootStefan Reinauer
On ARMv7 we need to carefully add memory barriers to all memory read and write operations. This change brings libpayload in sync with what coreboot is doing. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ie9c30b0f0d30531c5f9d99c2729246a86b8cec26 Reviewed-on: https://gerrit.chromium.org/gerrit/59294 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4316 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-03Drop obsolete CONSOLE_LOGBUFStefan Reinauer
This was used by Ron 13ys ago and was never used again ever since. Change-Id: I8ae8a570d67fa0b34b17c9e3709845687f73c724 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/59320 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4256 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-12-03libpayload: ARM: Don't leave alignment checking on after the exception testGabe Black
Currently, the exception handling code on ARM in libpayload turns on alignment checks as an easy way to generate an exception for testing purposes. It was leaving it on which disabled unaligned accesses for other, unlreated code running later. This change adjusts the code so the original value of the alignment bit is restored after the test exception. Built and booted into depthcharge on pit with an unaligned accesses added after the call to exception_init in the depthcharge's main. Before this change, the access caused an exception. After this change, the access completed successfully. Change-Id: If92cab3cc8eabca7c5b0560ce88a8796a27fe3b2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/59372 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4255 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-12-03libpayload: Make the region to scan for the cb tables configurable.Gabe Black
The address range to scan for the coreboot tables varies from machine to machine based on the range memory occupies on the SOC being booted and on the amount of memory installed on the machine. To make libpayload work on different ARM systems with different needs, this change makes the region to scan configurable. In the future, we might want to come up with a more automatic mechanism like on x86, although there's less consistency on ARM as far as what ranges are even memory in the first place. Change-Id: Ib50efe25a6152171b0fbd0e324dbc5e89c527d6e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/59242 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4254 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-12-03libpayload: Add missing break statement in coreboot table parsingStefan Reinauer
Otherwise the code would try to parse GPIOs when encountering a mainboard entry in the coreboot table. This never caused any problems because the mainboard entry is parsed before the GPIO entry. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I1443bda8585a990a39115743d48304ec4b54bccb Reviewed-on: https://gerrit.chromium.org/gerrit/59292 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4252 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-26libpayload: Drop PowerPC architectureStefan Reinauer
This was never completed / working and we have the working ARMv7 port for an architecture template, so get rid of this dead code. Change-Id: Ic2c1267ee5546dd6e1b63220c263b2fa86c8ae33 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56065 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4235 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload: usb mass storage card hot plugAaron Durbin
Mass storage devices such as card readers show up as as USB devices. However the media not be inserted. In those situations the previous code would just fake a disk and call usbcreate_disk. This is inappropriate because it forms a 1:1 mapping of USB device to disk leading to the inability to remove the disk and/or handle "hot plug" card insertion and removals. To alleviate this issue introduce the notion of ready to the usbmsc structure. It tracks detached, not ready, and ready states. The polling routine is then used to track not ready to ready transitions thereby creating and removing disks appropriately. This handles the case of inserting and removing a card that shows up as a new disk. Booted recovery mode. Able to observe inerstion and removal of sdcard. Also able to insert valid USB flash drive to boot as well. Change-Id: I3eefbe537ec1b9c975744b8984b06c17ae236f40 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57948 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4226 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload: usb mass storage detect empty mediaAaron Durbin
There is currently a hard-coded 30 sec delay in the mass storage driver while waiting for each device to become ready. However, mass storage card readers that are empty return an error code on the TEST UNIT READY command. A REQUEST SENSE command then needs to be issued and interrogate the data to determine if no media is present. If no media determination is found to be true the USB device is no longer considered a candidate to be a disk. This code does lead to the fact that the media card reader needs to be populated at enumeration time. I suspect this is not an issue as it appears the storage stack in libpayload can't handle removable media coming online later. Booted recovery and dev modes. Noted that removable mass storage devices with no media were ignored without any boot delay. Change-Id: Ida7a45614d97c6e6fbfc9bb099765aad4df550fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57828 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4225 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload: Fix xcompileStefan Reinauer
The architecture name for our ARM port is armv7, not arm. Hence, none of those flags were ever actually used. Fix the architecture name and remove the flags, they should not be set in xcompile, but in the Makefile, like in coreboot. Change-Id: Id9c5db7ebceafddb58a1ce1988417f09c074ba6c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56084 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4179 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload: Add USB support for non-PCI controllersStefan Reinauer
Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload (EHCI): correctly align PORTSCStefan Reinauer
Two structures in the USB EHCI stack were pointing to hardware but not marked attribute((packed)) hence leaving it to GCC to correctly align the data structures. Next, the number of reserved bytes in hc_op_t was wrong (but implicitly aligned to the correct values on x86) It seems this worked fine on x86, but on ARM it was doing the wrong thing. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I94bed4850ded7d3f7bbc7ff3079c103c6054c22d Reviewed-on: https://gerrit.chromium.org/gerrit/55555 Commit-Queue: Stefan Reinauer <reinauer@google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4174 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25Make ssize_t an actual ssize_tStefan Reinauer
In the process of getting rid of compiler includes during in coreboot and libpayload, we defined size_t and ssize_t ourselves, using a GCC macro for size_t: __SIZE_TYPE__. Unfortunately, there is no __SSIZE_TYPE__, so we temporarily redefine unsigned to signed to make __SIZE_TYPE__ __SSIZE_TYPE__. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I4cf4eb0fdaa4db64277c2585fe2c1bdc0acdf02b Reviewed-on: https://gerrit.chromium.org/gerrit/49947 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4156 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25ARM: Update the size/location of the coreboot tables so we can boot againGabe Black
Change-Id: I3235f42c7faaf28a63455162ea55dc1a6bebd1f5 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-by: Hung-Te Lin <hungte@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/48290 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4128 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25armv7: import updated cache/MMU stuff from corebootDavid Hendricks
This imports the cache/MMU code from coreboot as of 1877cee. Change-Id: I97ec8b9640921a94a4b27d89e4ae6185e9f96f18 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/48288 Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4134 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24libpayload: fix wrong endian assumption in sha1.cStefan Reinauer
Not all platforms !x86 are big endian, hence actually look at the CONFIG_LITTLE_ENDIAN flag instead of CONFIG_ARCH_X86. Change-Id: Ibbd8f48b377a1121dd1e045834a94a2d67eda2ab Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56066 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4236 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24payloads/external/SeaBIOS/Makefile.inc: Remove empty lines at file beginningPaul Menzel
Change-Id: I3e6eba62b6790836edf9813c2a45c77390d8c078 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4094 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-19Add GRUB2 payload to build systemVladimir Serbinenko
Since a long time GRUB 2 is a viable payload alternative to SeaBIOS and FILO. So make it easy for coreboot users to use GRUB 2 as a payload by integrating it into coreboot’s build system, so it can be selected in Kconfig. As the last GRUB 2 release 2.00 is too old and has several bugs when used as a coreboot payload only allow to build GRUB 2 master until a new GRUB release is done. The downside is, that accidental breakage in GRUB’s upstream does not affect coreboot users. Currently the GRUB 2 payload is built with the default modules which results in an uncompressed size of around 730 kB. Compressed it has a size of 340 kB, so it should be useable with 512 kB flash ROMs. Tested with QEMU. Change-Id: Ie75d5a2cb230390cd5a063d5f6a5d5e3fab6b354 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4058 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-10libpayload: add memory clobber to ins{b,w,l}Gerd Hoffmann
Change-Id: I3c4b8a9eeb6c4b2bcc58ccff091b4c997b2da923 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/4034 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-10-17libpayload/sample: Use settings from .xcompile file to build.Andrew Wu
It is for crossgcc. Change-Id: Ia1d676adfea340b6b80858215459491c9338d614 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3955 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2013-09-30libpayload: Switch xHCI shared ports back to EHCI on shutdownNico Huber
On Intel's Panther Point the xHCI ports are shared with an EHCI controller. Our xHCI driver switches them to xHCI, naturally. But we forgot to switch them back on shutdown, which left them unusable by a non-xHCI aware operating system. Change-Id: I70ef08655a603b42ee939935d50cf77ea97878a3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3791 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-09-24libpayload: Remove unnecessary keyboard mode setting codeShawn Nematbakhsh
keyboard_init attempts to read the existing mode register, set the 'XLATE' bit, and write it back. The implementation is buggy because the keyboard may be active at the time we read the mode, and we can misinterpret scancode data as the reply to our command. It leads to problems where the KB gets disabled in firmware. In fact, setting the 'XLATE' bit is completely unnecessary, even if we desire QEMU keyboard support. We already set this bit when we initialize the keyboard in pc_keyboard_init. Basically, this code does nothing (or worse), so just remove it. Change-Id: Iab23f03fa8bced74842c33a7d263de5f449bb983 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/3883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-09-06libpayload: Set heap's header size to 64-bitNico Huber
For libpayload clients with larger memory needs (eg. FILO with integrated flashrom) the current configuration isn't enough. Change-Id: Ic82d6477c53da62a1325400f2e596d7d557d5d1e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3889 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2013-09-06libpayload: Make heap code independent of its header sizeNico Huber
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Change-Id: Ie69ceb343494b7dd309847b7d606cb47925f68b6 Reviewed-on: http://review.coreboot.org/3888 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-09-03libpayload: reduce libcbfs verbosityPatrick Georgi
Prettier in real-world payloads (ie. FILO) Change-Id: I9ed968fe527c5d46090e707e2d89b7406a43662e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3887 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-08-26libpayload: Add a few more PCI constantsStefan Tauner
flashrom has started to use revision IDs to distinguish AMD chipsets and fails (even more) to build with libpayload since then because PCI_REVISION_ID is undefined in libpayload's pci header. Change-Id: If7440a48c1005a4ba4fc09303f47cdfa9f408ad1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3884 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-08-15CBFS: Change how the bss is zeroed when loading a stage.Gabe Black
For reasons explained in a previous CL, it might be necessary to "load" a file from CBFS in place. The loading code in CBFS was, however, zeroing the area of memory the stage was about to be loaded into. When the CBFS data is located elsewhere this works fine, but when it isn't you end up clobbering the data you're trying to load. Also, there's no reason to zero memory we're about to load something into or have just loaded something into. This change makes it so that we only zero out the portion of the memory between what was loaded/decompressed and the final size of the stage in memory. Change-Id: If34df16bd74b2969583e11ef6a26eb4065842f57 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3579 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15CBFS: Change the signature of cbfs_decompress.Gabe Black
Instead of returning 0 on success and -1 on error, return the decompressed size of the data on success and 0 on error. The decompressed size is useful information to have that was being thrown away in that function. Change-Id: If787201aa61456b1e47feaf3a0071c753fa299a3 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3578 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-07-10ARM: Tell the linker memset and memcpy are functions.Gabe Black
The memset and memcpy functions are assembled as ARM code, likely because that's the default of the assembler. Without special annotation, the assembler and linker don't know that those symbols are functions which need special handling so that ARM/thumb issues are handled properly. This change adds that annotation which gets those functions working in Coreboot which is compiled as thumb. Libpayload and depthcharge are compiled as ARM so they don't *need* the annotation since it just works out in ARM mode, but it's the safe thing to do in case we change that in the future. We should explicitly select ARM vs. thumb when assembling assembly files to be consistent across builds and toolchains. Change-Id: I814b137064cf46ae9e2744ff6c223b695dc1ef01 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3672 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28libpayload: Add strerrorStefan Tauner
Change-Id: I33d45ad7d09473b8c6f5b7ee5fbadc0d184f9dcd Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3537 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-06-27libpayload: Add more integer limitsStefan Tauner
Change-Id: If0963237806804a2a9d7f622c33013321379a04d Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3536 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-06-27libpayload: Fix whitespace errorsStefan Tauner
Change-Id: Ibc36988745cbc7ede2a00da376b5dd295014ffb1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3535 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-06-26libpayload: Use longer delay in tinycurses' wgetch()Nico Huber
The counted delay of 1ms was shorter than the time usb_poll() took (~30ms observed). So with a given timeout of 100ms it actually took 3s. We can lower the problem if we delay 10ms per loop iteration. Change-Id: I6e084bdd05332111cc8adcd13493a5dfb4bc8b28 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3533 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-25libpayload: Make lpgcc wrapper usable for in-tree buildsPatrick Georgi
Teach lpgcc to look in the in-coreboot tree directory structure, too. Change-Id: I3809456d072ce2f91542b0edb3fd39f536298cc2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3530 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-18libpayload: ahci: Increase timeout for signature readingNico Huber
We can't read the drives signature before it's ready, i.e. spun up. So set the timeout to the standard 30s. Also put a notice on the console, so the user knows why the signature reading failed. Change-Id: I2148258f9b0eb950b71544dafd95776ae70afac8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17libpayload: ahci: Fix command engine shutdownNico Huber
A timeout while waiting for a device' signature has shown that our error path wasn't correct. The shutdown of the ports command engine always timed out. Fix that by waiting for FR (FIS Receive Running) to be cleared independently from CR (Command List Running) and after clearing FRE (FIS Receive Enable). Change-Id: I50edf426ef0241424456f1489a7fc86a2cfc5753 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3494 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Fill gaps in the xHCI driverNico Huber
Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Port usb hub driver to use the generic codeNico Huber
This is mostly a rewrite, don't even try to read a diff. Tested with an internal rate matching hub on a QM77 board and three hubs integrated into DELL monitors. Change-Id: Ib12fa2aa90af4e0f37143d2ed92c4a1705b6d774 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3451 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Add a generic driver for usb hubsNico Huber
The current drivers for external usb hubs and root hubs all follow the same pattern. Before adding another one with 90% of the same code, extract the common parts and rewrite them with a simple interface. This also adds debouncing of new attachments. Current drivers just waited 100ms before they reset the device. However, we should check if the device becomes disconnected and reconnected during this period. Porting of the current hub drivers will take place in separate commits (when I have time to test the older HCIs). Change-Id: I0c0ce0ac1b1cc51fb4cd009b3f9fcd1b9d2ba8fe Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3450 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: usb: Add interval attribute to endpointsNico Huber
Read bInterval from endpoint descriptors and store it in our endpoint_t struct. The interval is encoded dependently on the device' speed and the endpoint's type. Therefore, it will be normalized to the binary logarithm of the number of microframes, i.e. t = 125us * 2^interval The interval attribute will be used in the xHCI driver. Change-Id: I65a8eda6145faf34666800789f0292e640a8141b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3449 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Redirect USB slave init through controller driverPatrick Georgi
xHCI requires special treatment of set_address since it determines the device number itself (instead of the driver, as with the other controllers). The controller also wants to validate a chosen device configuration and we need to setup additional structures for the device and the endpoints. Therefore, we add three functions to the hci_t structure, namely: set_address() finish_device_config() destroy_device() Current implementation for the Set Address request moved into generic_set_address() which is set_address() for the UHCI, OCHI and EHCI drivers. The latter two are only provided as hooks for the xHCI driver. The Set Configuration request is moved after endpoint enumeration. For all other controller drivers nothing changes, as there is no other device communication between the lines where the set_configuration() call moved. Change-Id: I6127627b9367ef573aa1a1525782bc1304ea350d Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3447 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Add enum for USB speedsNico Huber
These values are already used in this usb stack. Change-Id: If96f1dc2b67fbc13dfc4ae2d84e8f9945aa03163 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3448 Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: usb: Skip non-endpoint descriptors during initNico Huber
During device initialization, skip any non-endpoint descriptor before reading the endpoint descriptors. By now, only HID descriptors were skipped. Change-Id: I190f3ae44b864aa71d5f32c3738097cf8f33a61b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-06-04libpayload: Whitelist Mobile Panther Point AHCI controllerNico Huber
Add the Mobile Panther Point (PPT) AHCI controller (DEVID 0x1e03) to the list of tested controllers. Also comment the only other listed controller (Mobile ICH9). The PPT AHCI controller was tested with a QM77 chipset on a Kontron KTQM77 board. Change-Id: Ia396761411f4f9289af11ec8e1b144512b2fc126 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3361 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>