| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I990d74d9fff06b17ec8a6ee962955e4b0df8b907
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77970
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 64 bit encode/decode functions to libpayload, since it is required
in the patch that moves device_tree to commonlib.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I5dba9a7f41147a511ba1250786e7c51ce623e70a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83082
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set a pointer in lib_sysinfo for CSE_BP_INFO and CSE_INFO.
BUG=b:343022317
TEST=Verified CBMEM data in depthcharge on Screebo
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I3aa64d1e439a0596e732a3c0608d60913cefd19f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Adds 64-bit (x86_64) support to libpayload's exception handler,
previously limited to x86_32.
Ensures `exception_init_asm` is called when building with
LP_ARCH_X86_64 Kconfig.
BUG=b:336265399
TEST=Successful build and boot of google/rex and google/rex64 on
ChromeOS.
Verified correct x86_64 exception handling by triggering "Debug
Exception" using firmware-shell as below:
firmware-shell: mm.l -0
Debug Exception
Error code: n/a
REG_IP: 0x0000000030023e9f
REG_FLAGS: 0x0000000000000046
REG_AX: 0x0000000000000009
REG_BX: 0x0000000000000000
REG_CX: 0x0000002000000000
REG_DX: 0x0000000000000001
REG_SP: 0x0000000034072ec0
REG_BP: 0x0000000000000009
REG_SI: 0x0000000000000029
REG_DI: 0x0000000034072eef
REG_R8: 0x0000000000000009
REG_R9: 0x0000000000000000
REG_R10: 0x0000000000000000
REG_R11: 0x0000000034072d70
REG_R12: 0x0000000000000004
REG_R13: 0x0000000000000001
REG_R14: 0x0000000034072ee6
REG_R15: 0x0000000000000004
CS: 0x0020
DS: 0x0000
ES: 0x0000
SS: 0x0018
FS: 0x0018
GS: 0x0050
Dumping stack:
0x340730c0: 3003c32e 00000000 ... 00000000 00000000
0x340730a0: 30034bc6 00000000 ... 0000002a 00000000
0x34073080: 34073234 00000000 ... 00002e65 00000000
...
...
0x34072ee0: 340730ed 30300000 ... 34073000 00000000
0x34072ec0: 34072ed8 00000000 ... 00000000 00000008
Ready for GDB connection.
Change-Id: I8f0aa1da8d179a760e8d49c3764dfd5a69d06887
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83036
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Removed an extra space character from the `printf` format string in
`dump_exception_state` to ensure proper alignment of register values
when printed during exception handling.
BUG=b:336265399
TEST=Built and booted google/rex64 successfully.
Verified correct alignment in exception state dumps.
Change-Id: I8ff92775e32ee754967b1b0a43cd68971b4aadfc
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83047
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
TEST=Build and verify on Screebo
TEST=make unit-tests
```
$ make tests/commonlib/bsd/string-test
[==========] tests_commonlib_bsd_string-test(tests): Running 1 test(s).
[ RUN ] test_skip_atoi
[ OK ] test_skip_atoi
[==========] tests_commonlib_bsd_string-test(tests): 1 test(s) run.
[ PASSED ] 1 test(s).
```
Change-Id: Ifaaa80d0c696a625592ce301f9e3eefb2b4dcd98
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82910
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: Ib95cb55add23fa172f187cbcb475958767f8a923
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82905
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ARM SoC supports FEAT_CCIDX after ARMv8.3. The register field
description of CCSIDR_EL1 is different when FEAT_CCIDX is implemented.
If numsets and associativity from CCSIDR_EL1 are not correct, the system
would hang during mmu_disable().
Rather than assuming that FEAT_CCIDX is not implemented, this patch
adds a check to dcache_apply_all to use the right register format.
Reference:
- https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/12770
BUG=b:317015456
TEST=mmu_disable works on the FEAT_CCIDX supported SoC.
Change-Id: I892009890f6ae889e87c877ffffd76a33d1dc789
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82636
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Just follow the examples of other payloads and simply remove the build
directory of said payload.
Change-Id: Idf2a8f3b9ecbb300514d2d1deede76785fd402b7
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This adds another external payload to coreboot. The payload has been
heavily based on u-boots UEFI implementation.
The leanefi payload is basically a translator from coreboot to UEFI. It
takes the coreboot tables and transforms them into UEFI interfaces.
Although it can potentially load any efi application that can
handle the minimized interface that leanefi provides, it has only
been tested with LinuxBoot (v6.3.5) as a payload. It has been optimized
to support only those interfaces that Linux requires to start.
Among other leanefi does not support:
- efi capsule update (also efi system resource table)
- efi variables
- efi text input protocol (it can only output)
- most boot services. mostly memory services are left (e.g. alloc/free)
- all runtime services (although there is still a very small runtime
footprint that is planned to be removed in the near future)
- TCG2/TPM (although that is mostly because of laziness)
The README.md currently provides more details on why.
The payload currently only supports arm64 and has only been tested
on emulation/simulator targets. The original motivation was to get ACPI
on arm64 published to the OS without using EDK2. It is however also
possible to supply the leanefi with a FDT that is published to the OS.
At that point one would however probably use coreboot only instead of
this shim layer on top. It would be way nicer to have Linux support
something else than UEFI to propagate the ACPI tables, but it requires
to get the Linux maintainer/community on board. So for now this shim
layer ciruimvents that.
LBBR Test:
// 1. dump FDT from QEMU like mentioned in aarch64 coreboot doc
// 2. compile u-root however you like (aarch64)
// 3. compile Linux (embed u-root initramfs via Kconfig)
// 4. copy Linux kernel to payloads/leanefi/Image
// 5. copy following coreboot defconfig to configs/defconfig:
CONFIG_BOARD_EMULATION_QEMU_AARCH64=y
CONFIG_PAYLOAD_NONE=n
CONFIG_PAYLOAD_LEANEFI=y
CONFIG_LEANEFI_PAYLOAD=y
CONFIG_LEANEFI_PAYLOAD_PATH="[path-to-linux]/arch/arm64/boot/Image"
CONFIG_LEANEFI_FDT=y
CONFIG_LEANEFI_FDT_PATH="[path-to-dumped-DTB]"
// 6. compile coreboot
make defconfig
make -j$(nproc)
// 7. run qemu like mentioned in coreboot doc (no FIT)
// 8. say hello to u-root and optionally kexec into the next kernel
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I4093378e89c3cb43fb0846666de80a7da36b03f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ron Minnich <rminnich@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Ia4f5d4140eeb8625c5ee41e38f048658db28a199
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79684
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Added `$(obj)/libpayload-config.h` as a dependency for the `lib`
target.
- This ensures the config header is up-to-date before building the
library.
TEST=Able to build google/rex.
Change-Id: If26336f6261aadf611fa5338c4300873156cc3da
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch introduces x86_64 (64-bit) support to the payload, building
upon the existing x86 (32-bit) architecture. Files necessary for 64-bit
compilation are now guarded by the `CONFIG_LP_ARCH_X86_64` Kconfig
option.
BUG=b:242829490
TEST=Able to verify all valid combinations between coreboot and
payload with this patch.
Payload Entry Point Behavior with below code.
+----------------+--------------------+----------------------------+
| LP_ARCH_X86_64 | Payload Entry Mode | Description |
+----------------+--------------------+----------------------------+
| No | 32-bit | Direct protected mode init |
+----------------+--------------------+----------------------------+
| Yes | 32-bit | Protected to long mode |
+----------------+--------------------+----------------------------+
| Yes | 64-bit | Long mode initialization |
+----------------+--------------------+----------------------------+
Change-Id: I69fda47bedf1a14807b1515c4aed6e3a1d5b8585
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81968
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Integrate head.S directly into libc and remove all instances of head.o.
* Drop 'separate class' entry for head.S.
* Drop special treament for head.o inside lpgcc.
* Change the .text in `x86/head.S` to `.section .text._entry`.
* Drop arch/mock/head.c, initially added as a dummy file.
Change-Id: I156d781908fcc38d455bbf9f2c29e5ab95c7775a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This moves the multiboot header into its own include file, simplifying
head.S and making it easier to include/exclude the multiboot header
based on config options.
BUG=b:242829490
TEST=Able to build and boot google/rex.
Change-Id: I59a22dfe36044b4dd64a5b028a134be7a7d02a48
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82533
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit renames the variable _ARCH to _ARCHDIR in the libpayload
build script (lpgcc) to align with the naming convention of other
variables used in this file.
This change improves code readability and maintainability.
Change-Id: Iea4af68e49ab1cd7ec8156a14f8215244e9c0622
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82479
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Upstream commit 11ad164bce (UefiPayloadPkg: Make UPL build script arch
agnostic, 2024-02-22) changes the build script's behavior to not assume
the arch. Without defining BUILD_ARCH, the build script will not
function properly and results in the payload failing to build.
Both UefiPayload and Universal Payload can only be built in X64.
Change-Id: Icd942d0c15a99231d09f9cbdc5eb48333b6aa6e5
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
initramfs is not build when bzImage is selected
Add build/initramfs dependency to build/bzImage
BUG = N/A
TEST = Built and boot facebook monolith
Change-Id: I002202a0340347e78ce22024761d997605bd3f72
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77606
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
U-Boot v2024.04 was released on Tue 02 April 2024
Change-Id: I21fe81e9e01f2f21f9a4581fa8fdbf661fe270bd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82007
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When CONFIG_LP_MULTIBOOT is enabled, save the values of EAX and EBX
passed from the bootloader. This information can be useful for
multiboot payloads feature alone.
Change-Id: I98c2cd00206ee48eb0fc67edd9533032bcf3e5eb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82040
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Core 2 platforms have issues with HPET. Enable support to use the LAPIC
driver so those machines actually boot and don't hang.
The LAPIC is actually closer to the CPU than the HPET (on the PCH),
which reduces access latency, leading to higher resolution of the timer.
Tested on a Lenovo X200 with a Core 2 Duo.
Change-Id: I33144d6c1c120e7faa47b99e8262b0997c45c9b9
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82000
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change `inl()` return type from `unsigned long` to `unsigned int` to
match the function definition and ensure consistency across platforms.
BUG=b:242829490
TEST=Compiled successfully in 32-bit and 64-bit modes.
Change-Id: I681935665c8de9ee472ab72fe1ac2f5dcc0f2534
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Add a Kconfig to selectively enable the AMD Picasso eMMC driver
recently added to MrChromebox's edk2 fork. When selected, will enable
booting from AMD Picasso devices with eMMC storage.
TEST=tested with rest of patch train
Change-Id: I6536a6f243f6766b913e295afebcf5b965e4e969
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81892
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, we keep the double-quotes from Kconfig, resulting in an
invalid path. So just call `strip_quotes` like we do with all other
paths from Kconfig.
Change-Id: Ibcaa59be0fdd84d1fb9e061394fd9b0f7aa1830b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81947
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The `PRIORITIZE_INTERNAL` option was somehow duplicated, so remove the
extra copy, leaving the one under the MrChromebox repo specific
settings.
TEST=build qemu w/edk2 payload, check build log that the
'PRIORITIZE_INTERNAL' option is only added once to the build string.
Change-Id: I4c4c433184d93337c926e256e77054afc00a2566
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Add a Kconfig to selectively enable the UFS DXE driver recently added
to MrChromebox's edk2 fork. When selected, will enable booting from
devices with UFS storage.
TEST=tested with rest of patch train
Change-Id: I0b54d21dc87abf6938c03948830f92ce5097ef7d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81870
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes the GPL-restricted commonlib helpers available in
libpayload when CONFIG_LP_GPL is selected, as a convenience to GPL
payloads that use them a lot.
Cq-Depend: chromium:5375721
Change-Id: I844c6e700c4c0d557f97da94fa3aa2e868edd756
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
CB:77969 made minor changes to the die_if() macro. One of the
consequences is that the format string passed to it can no longer be a
real `char *` variable, it needs to actually be a string literal. In the
vast majority of call sites that is already the case, but there was one
instance in the GDB code where we're reusing the same format string many
times and for that reason put it into a const variable. Fix that by
turning it into a #define macro instead. (Even though this technically
duplicates the format string, the linker is able to merge identical
string literals together again, so it doesn't really end up taking more
space.)
Change-Id: I532a04b868f12aa0e3c01422c075ddaade251827
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81361
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CB:77968 made some non-BSD commonlib files part of libpayload when
CONFIG_LP_GPL is set. This patch exports those headers to the payload
(again only when CONFIG_LP_GPL is set) so that payloads can also call
the functions in them directly.
Also make those includes available to tests so that their functions can
be tested. There's no menuconfig for unit tests, so they are included
unconditionally, but this should be fine since the tests are standalone
and won't have to link with any proprietary third-party code.
Change-Id: Ifc3e52ee5c3e51520f7b7d44b483bfcb0e8380f8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
UPL requires the Shim Layer, and those patches exist in the
`starlabsltd` fork.
Set the repository to custom, to allow this fork and branch to
be selected correctly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieca72498bde51a184d689670449b66ccc78d658a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81277
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch moves commonlib/stdlib.h -> commonlib/bsd/stdlib.h, since
all code is BSD licensed anyway.
It also moves some code from libpayloads stdlib.h to
commonlib/bsd/stdlib.h so that it can be shared with coreboot. This is
useful for a subsequent commit that adds devicetree.c into commonlib.
Also we don't support DMA on arm platforms in coreboot (only libpayload)
therefore `dma_malloc()` has been removed and `dma_coherent()` has been
moved to architecture specific functions. Any architecture that tries to
use `dma_coherent()` now will get a compile time error. In order to not
break current platforms like mb/google/herobrine which make use of the
commonlib/storage/sdhci.c controller which in turn uses `dma_coherent` a
stub has been added to arch/arm64/dma.c.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I3a7ab0d1ddcc7ce9af121a61b4d4eafc9e563a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
PAYLOAD_INFO is a very old feature that can add a key/value information
section to a payload file. It seems to have only ever been generated by
coreinfo and never really read by anything.
Since CB:1721 in 2012, the feature has been inadvertently broken in
practice since the `.note.pinfo` sections that contain the information
get discarded from the payload before cbfstool gets to see them. Since
CB:28647 in 2018, support for the section in the SELF loader was
(inadvertently?) dropped, so if someone actually fed cbfstool a payload
ELF that did have a `.note.pinfo` section, modern coreboot would refuse
to boot the payload entirely (which is probably not a good state to
leave things in).
This patch removes the code to generate PAYLOAD_INFO entries entirely,
but leaves the support to parse and extract those sections from old
payloads in place in cbfstool.
Change-Id: I40d8e9b76a171ebcdaa2eae02d54a1ca5e592c85
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
085c97363ed6477c64b61263a59d7e9642e05cda introduced a bug in that we
could not select a file to use, and, in fact, the payload was never
installed into the image in this case.
Add FLAT_BINARY to the predicate enabling a file selection dialog.
Change-Id: I8174b656b1e6ebb3663172f473e4070b30f19126
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81183
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This add another choice option for adding a flat binary instead of an
ELF or some other payload. It keeps the IS_PAYLOAD_FLAT_BINARY hidden in
the menuconfig because it is generally not configurable but dependent on
the payload you selected.
CONFIG_PAYLOAD_OPTIONS has been exposed to be configurable in commit
f0055e4a81 (payloads/Kconfig: Add flat binary as payload option) as part
trying to enable flat binary payloads. CONFIG_PAYLOAD_OPTIONS do not
need to be configurable though unless you have a flat binary. The patch
therefore takes a different appraoch by adding a new payload type
besides PAYLOAD_ELF and PAYLOAD_FIT.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: If775e0846f9a5631da3fc103bdd9e6aea0be879a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Sometimes when a test doesn't work it's convenient to run it through
GDB. This patch adds a variable you can set on the make commandline to
conveniently enable all the compiler flags needed to make that work.
Change-Id: I3ac80ad095e0b72cc3176cbf915d1f390cd01558
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81112
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The using config string for amd64 as UROOT_ARCH contains typo
Correct using CONFIG_LINUXBOOT_X86_64
BUG = N/A
TEST = Build boot facebook monolith
Change-Id: I6cfefb3f8e4e61bd56ca0fe3239000db8c07b088
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77605
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move hard-coded repo and repo name to Kconfig as default value
DEPTHCHARGE_REPO default to:
https://chromium.googlesource.com/chromiumos/platform/depthcharge
DEPTHCHARGE_BRANCH default to:
origin/main
When DEPTHCHARGE_MASTER=y, DEPTHCHARGE_BRANCH can be used to point
out a particular branch.
This change enable to use mirrored internal depthcharge repo and
branch for early SOC development (before upstreaming SOC and
dephthcharge code).
TEST=Build coreboot and check the repo remote link from:
payloads/external/depthcharge/depthcharge
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Icca10aa770b7b7a6e010f58bcf1e4f0a3401681a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80726
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
|
|
Build the Linux kernel with the same amount of jobs as coreboot.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ie7af5aef4560b8d4dd840d9c578f8a2a4c387400
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78644
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
It is needed in order to move device_tree.c into commonlib in a
subsequent commit.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I16eb7b743fb1d36301f0eda563a62364e7a9cfec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77968
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch passes the correct flag to vboot to enable SIMD crypto
acceleration on arm64 devices. This uses a core part of the ISA and
should thus be supported on all arm64 SoCs -- so we normally always
want it enabled, but there should still be a Kconfig in case a SoC wants
to use the hwcrypto interface for its own (off-CPU) crypto acceleration
engine instead. (You could also disable it to save a small amount of
code size at the cost of speed, if necessary.)
Change-Id: I3820bd6b7505202b7edb6768385ce5deb18777a4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
It's been several years already since we announced the deprecation of
the legacy CBFS API for payloads. It's time to remove it completely.
Change-Id: I0ed157ac2d1376b8dff4537af9a63731064b45f6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80650
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Change-Id: Iea569fd457b3cd1f4746fbc6a96319eb42733a6b
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80586
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
These strings didn't match the license names exactly, so update them
to match.
Change-Id: Ib946eb15ca5fa64cbd6b657350b989b4a4c1b7b7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
It seems that reducing the return type of timer_hz() to uint32_t in
CB:78888 was a bad idea... some Intel platforms actually use their raw
CPU clock for the timestamp counter which can be higher than 4GHz. This
patch reverts it back to uint64_t.
Also remove the redundant assertion in timer/generic.c since timer_us()
itself already does that check.
Cq-Depend: chromium:5274555
Change-Id: I471c7de7a28aec5bb965b23525ed579481ac8361
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
It seems that we have some applications where we need to calculate a GCD
in 64 bits. Now, we could instantiate the algorithm multiple times for
different bit width combinations to be able to use the most efficient
one for each problem... but considering that the function usually only
gets called once per callsite per stage, and that software emulation of
64-bit division on 32-bit systems doesn't take *that* long either, we
would probably usually be paying more time loading the second instance
of the function than we save with faster divisions. So let's just make
things easy and always do it in 64-bit and then nobody has to spend time
thinking on which version to call.
Change-Id: I028361444c4048a0d76ba4f80c7334a9d9983c87
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80319
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This patch moves libpayload over to the commonlib implementation for
calculating the IP checksum.
Change-Id: Ie8d323ce9f8d946758619761b4b22d54bce222b6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80253
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This adds the ability to add a flat-binary using menuconfig.
Test: boot hifive-unmatched mainboard with the following config:
CONFIG_PAYLOAD_NONE=n
CONFIG_PAYLOAD_ELF=y
CONFIG_PAYLOAD_FILE="~/repos/linux-riscv/arch/riscv/boot/Image"
CONFIG_PAYLOAD_IS_FLAT_BINARY=y
CONFIG_PAYLOAD_OPTIONS="-l 0x82000000 -e 0x82000000"
CONFIG_COMPRESSED_PAYLOAD_LZMA=y
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I48c6b53a0c9f5b173c89f1a294a0c37fa1a58f31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79950
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie7038712de8cc646632d5e7d29550e3260bf2c62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80103
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
The rest of the Makefiles will be renamed in following commits.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Idaf69c6871d0bc1ee5e2e53157b8631c55eb3db9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80063
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Although a section ".bss.ttb_buffer" is created automatically for
'ttb_buffer' with the GCC option '-fdata-sections', specify the section
name explicitly to make the name stand out to code readers, and to
reduce the chance of accidentally changing the section name by renaming
the variable.
Change-Id: I2930f238f63b555c4caa65709768afa314d9cf87
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I267d341075b907ac72439cf28c2c1458cbeb8d4b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Change-Id: Idfe479272abf2db93f8fc4bc1ba02d8b8072fcfe
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
If CONFIG_LP_ARCH_MOCK, pass FIRMWARE_ARCH=mock when building vboot
fwlib, so that vboot's Makefile will append the correct flags to CFLAGS.
BUG=none
TEST=(depthcharge) make unit-tests -j
BRANCH=none
Cq-Depend: chromium:5182247
Change-Id: I9ead7f2f93eac5f5c3887074423fb9aa50a489c0
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79956
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A recent update broke installation of commonlib headers with a relative
path in $(DESTDIR), which is the default. Make sure to install into the
right location in case we changed the current directory.
Change-Id: I61fa4aa0ecd0f81ee03ff89183e1b65e7875dea6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Fixes: ee53dfd07d3b (libpayload: Remove shell for loops in install Makefile target)
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79908
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Moving it into the .ttb_buffer section will accidentally set the LOAD
flag. So, move it back to .bss.ttb_buffer section to prevent the binary
size bloating.
BUG=b:248610274
TEST=Make sure the device is still bootable with this change.
BRANCH=none
Cq-Depend: chromium:5173448
Change-Id: I9bb08878dd4be01d9ed3f96933f774dd6296f76e
Signed-off-by: Yi Chou <yich@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79800
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
They always require special care so that line breaks and variable names
are escaped properly. One loop can be removed entirely because install
accepts multiple files to install in a target directories, the other
loops were filled by find which can just call the commands on its own.
Change-Id: I9f9dddfe3f3ceceb6a0510d6dd862351e4b10210
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79523
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add `VBOOT_X86_RSA_ACCELERATION' Kconfig option to enable SSE2
instruction set implementation of modulus exponentiation which is part
of the RSA signature verification process. This option is enabled on
CHROMEOS.
| modpow() function call | original on rex0 | SSE2 on rex0 |
|------------------------+------------------+--------------|
| depthcharge - step 1 | 0.547 | 0.288 |
| depthcharge - step 2 | 0.152 | 0.081 |
| depthcharge - step 3 | 0.164 | 0.079 |
|------------------------+------------------+--------------|
| Total (ms) | 0.863 | 0.448 |
| modpow() function call | original on brya0 | SSE2 on rex0 |
|------------------------+-------------------+--------------|
| depthcharge - step 1 | 0.693 | 0.248 |
| depthcharge - step 2 | 0.172 | 0.065 |
| depthcharge - step 3 | 0.223 | 0.067 |
|------------------------+-------------------+--------------|
| Total (ms) | 1.088 | 0.38 |
BUG=b:312709384
TEST=modular exponentiation is about twice faster on rex0 and brya0
Change-Id: I801ebd7839261c6bd07fb218e1e36a7108e219bf
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This updates all warnings currently being printed under the files_added
and build_complete targets to the show_notices target.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia14d790dd377f2892f047059b6d24e5b5c5ea823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79423
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If a framebuffer is already configured by coreboot, we need to ensure
that the framebuffer size is a multiple of GRANULE_SIZE before passing
to `mmu_add_memrange`. Otherwise, we would fail to allocate memory
region due to `sanity_check`.
Change-Id: Ia6a6400733ca10a61220087e87022f68c28e4789
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79451
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We should make sure _stack/_estack and the other labels are consistent.
And _data & _edata is also useful to clean up the sensitive data on the
data section.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Cq-Depend: chromium:5052462
Change-Id: I589040f4db60b35813ea9f4ba9503244bd7def00
Signed-off-by: Yi Chou <yich@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This fixes commit 12ae850dfc1 which used the wrong symbol, and previous
versions of Kconfig didn't notice.
Change-Id: I7145fd81a30a1455a6dd2c7f24564956a116d180
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79263
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When cleaning the sensitive data in the memory, we will want to prevent
zero out the content of tbb_buffer. Move the ttb_buffer to a standalone
section will simplify the problem.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Change-Id: I610276cbe30552263d791860c15e5ad9a201c744
Signed-off-by: Yi Chou <yich@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79078
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some sensitive data may remain DMA buffer, we will want to zero out
everything on the DMA buffer before we jump into the kernel to
prevent leaking sensitive data into the kernel.
To accomplish that, we will need this function to get the range of
memory that can be allocated by the dma allocator.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Signed-off-by: Yi Chou <yich@google.com>
Change-Id: I8f3058dfd861ed44f716623967201b8cabe8d166
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: Ieef433e9d6745c6243b4823c9a7f250d3c53ebcb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78926
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Guard multiple options depending on another with an if-block. It's not
needed to repeat the condition for every option.
This also cleans up the ordering of the options and groups all options
related to iPXE.
Change-Id: I9e74ab567f619a2d5c20c6c0282b37193d9ac01b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78925
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since #c4fdec0a83d69bd0399b1b4351fa9c3af3c6fd65, edk2/master will
work with coreboot without modification.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8350f5114445d2608861ef6e807f958e598dfe07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The value from raw_read_cntfrq_el0() could be large enough to cause
overflow when multiplied by USECS_PER_SEC. To prevent this, both
USECS_PER_SEC and hz can be reduced by dividing them by their GCD.
This patch also modifies the return type of `timer_hz()` from
`uint64_t` to `uint32_t`, assuming that in practice the timestamp
counter should never be that fast.
BUG=b:307790895
TEST=boot to kernel and check the timestamps from `cbmem`
Change-Id: Ia55532490651fcf47128b83a8554751f050bcc89
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78888
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of redirecting the output of sed into a temporary file and
copying it to its target then, just tell sed to do the replacements
in-place and don't let it create a backup of the original file. The
overhead is not needed.
Change-Id: I442616cd78098b653af5bd49bc7a4f021c99e081
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
TEST=emerge-geralt libpayload
Change-Id: Ib9dd1d2f658d4411c36d0198774819690686a393
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78887
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
uImages are generated for non-x86 arch.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Icb1184497087d66a7cc6fd27402365a028cc4eaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
This patch introduces a new coreboot table entry named
"has_external_display" to understand if external display is attached.
This information is useful to prevent graceful shutdown by payload
when the LID is closed but an external display is present.
This piece of the information will be gathered by coreboot and passed
into the payload using this new entry aka external_display because
payload (i.e., deptcharge) doesn't have any other way to determine
if external display is available.
BUG=b:299137940
TEST=Able to build and boot google/rex.
w/o this patch:
LID closed and external display attached (HDMI) in developer mode
(GBB 0x39):
> System is powered off by depthcharge
w/ this patch:
LID closed and external display attached (HDMI) in developer mode
(GBB 0x39):
> Booted to OS and device is alive/usable
Change-Id: I0fa7eee4c5a50371a7a66c6ca1ac2c7d046d010b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77796
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the default branch used for MrChromebox's edk2 fork from 2023-06
to 2023-09. This updated branch has been rebased on the latest upstream
stable tag (edk2-stable202308), and fixes some USB detection issues, as
well the coreboot Kconfig for prefering internal or external boot
devices.
TEST=build/boot google boards link, panther, lulu,reef, ampton, akemi,
banshee, zork, frostflow with edk2 payload selected.
Change-Id: I7c5f9ae1ca4edd8211f55f4ecf2b3b495f473a43
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Disabling TPM support in edk2 can actually cause problems booting from
USB on some Intel-based boards with a CR50 TPM when using the edk2
GOP driver option, so rather than disable the TPM for all CR50 boards,
restrict the default to only AMD boards, where the boot hang with
TPM enabled was originally observed.
TEST=build/boot Win11, Linux from usb on google/fizz when built
with edk2 payload and edk2 GOP driver option selected.
Change-Id: I01509fea2dd42b741c00abcf9fb8b936e895b932
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78031
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Don't skip checking out the specified edk2 branch if the repo contains
untracked files, which may be the case if the EDK2_GOP_DRIVER option
is selected. Also ensure the submodule pointers are correct when
checking out.
TEST=build google/panther with GOP driver option and edk2 payload 2x,
switching branches between builds and ensure the correct branch is
used each time and submodules are synced with branch.
Change-Id: If7040bd5c49209b37a4b308485bf59352197d3b6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Several of the build commands passed by the Makefile only exist
in MrChromebox's fork of edk2. Guard these, and the corresponding
Kconfig options, against the selection of the MrChromebox repository.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I41d8d54e5b91990dd9fb88967fcd549a86cf6fe9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78036
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If LP_VBOOT_CBFS_INTEGRATION is enabled, then libcbfs will reboot with
vboot failure in non-recovery mode on CBFS file hash mismatch.
BUg=b:197114807
TEST=Build with VBOOT_CBFS_INTEGRATION enabled and boot on
google/ovis4es device
Change-Id: Ic0f62212b7217b384e8c4cbd9535fe4243301f8c
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77726
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Patch adds:
- vboot_fail_and_reboot() for vboot failures handling.
- reboot() weak implementation for payloads to implement, used
by vboot_fail_and_reboot().
- vboot_recovery_mode_enabled() to check if recovery mode flag is set in
vboot context. Implemented for future libcbfs implementation
of VBOOT_CBFS_INTEGRATION in libpayload.
BUG=b:197114807
TEST=none
Change-Id: I53d1955573d54bc56d05f7780c18dcc8ac1fd399
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To fully and easily implement fallback/recovery in libcbfs with vboot
support the codebase requires access to vboot context. Moving context
management to libpayload allows to avoid unnecessary overhead and code
complication and still allows payloads to access it in a way it was
designed. Access to this codebase will also allow implementation of e.g.
vboot_fail_and_reboot() and other helpful utilities used by coreboot and
depthcharge.
BUG=b:197114807
TEST=make unit-tests
TEST=Build and boot on google/ovis4es with CL:4839296 and
VBOOT_CBFS_INTEGRATION enabled
Change-Id: Id719be7c4f07251201424b7dc6c1125c6b5756d8
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add support for moving the console cursor horizontally and vertically.
BUG=b:300405745
TEST=Tested using firmware shell on Rex.
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I585add120b559396bc0e28aa972b0ae2a33f1fa8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77900
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
initramfs is built always, ignoring CONFIG_LINUXBOOT_BUILD_INITRAMFS
Built initramfs only is CONFIG_LINUXBOOT_BUILD_INITRAMFS is set
BUG = N/A
TEST = Built and boot facebook monolith
Change-Id: I0d575ff7528fceb06b5394642527713bb071c8b3
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77607
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang warns about this.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I8bdd45a7ef47274b0253397fa8fd9409a70d2192
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use "int foo(void)" instead of old-style "int foo()".
Change-Id: Ic698dbbba74d579a21ff57005a7aa9bb8ce80253
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77485
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang does not recognize comments to indicate falltrough is intended
behavior.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Idcf7a24fc763b80863902702172b4ea950e132b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77431
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This compiler argument only exists on gcc.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I10902517c86daedc9853e6f6cac8fcf513211bb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77436
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes compilation with clang.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I675056c8a15fe446bba81a144bfea64d106df293
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77435
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is necessary with clang.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Icc197fbd48b49bfa8770caf01727669b0ac59090
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Update the U-Boot version to the latest release. Also switch to github
since it is typically much faster to download than the existing URL.
Drop the 'experimental' tag since this payload is pretty stable. It is
also tested regularly in U-Boot's CI.
Change-Id: I082130539c3474593a82e4b21cb995380f4db168
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77149
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77463
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Fix regression introduced in I25e757108e0dd473969fe5a192ad0733f1fe6286
"payloads/external/LinuxBoot: Clean up".
Include the initrd into the payload. Allows to actually use LinuxBoot.
Change-Id: I5ab6b1a43a4100e83f4c188b9ea3451ab7b4ffe5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77412
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For libflashrom we need the delay functions but when including the whole
libpayload.h it has conflicting symbols.
Change-Id: I6e4a669b8ba25836fb870d74c200985c1bfdb387
Signed-off-by: Thomas Heijligen <src@posteo.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This adds a Kconfig option to select memtest86+ version 6 as a secondary
payload and sets that as the default. The coreboot version 5 code may
still be selected and used if desired.
Compiling for 32 bit requires glibc from multilib installed, if the host
system is running on 64 bit, as header files, e.g. gnu/stubs-32.h, are
required from there. So introduce a new choice menu which allows to
choose between 32 and 64 bit.
By default, the stable 6.20 version is selected instead of the top of
the main branch.
TEST=Build both V5 and V6, boot them in QEMU
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Change-Id: Ie0eedc25fcf37b925b072ca809c019a599a20392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Remove dummy ARCH_SPECIFIC_OPTIONS.
Change-Id: Ia71021b8597b1d6a227292b6568351e994ad62b0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Disable TPM support for CR50 TPM when using MrChromebox repo, since
it's not currently supported in edk2, and causes some boards (eg AMD
Zen-based) to failed to boot.
TEST=build/boot on google/frostflow
Change-Id: I64b5eb09d64eafd2bed400b7a7c97750cc368aed
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77270
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig for passing a VBT file and GOP driver to edk2, and pass a
build param to use them along with the platform GOP driver. This allows
edk2 to initialize the display and change display modes, instead of
being limited to the single mode set by whatever display init method
coreboot might use (libgfxinit, FSP/GOP, VBIOS, etc).
TEST=build/boot multiple google boards spanning several platforms using
the edk2 GOP driver for display init.
Change-Id: I63a49df2411fe44b06eaee6d0fb9aab42ac8aedb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
When cbfs_map()/cbfs_ro_map() fails, the caller may still want to know
the decompressed size of the CBFS file, for example, to print an error
message. Move the assignment earlier in the flow. Note that coreboot's
cbfs_map() is already doing the same.
BUG=none
TEST=emerge-geralt libpayload
BRANCH=none
Change-Id: I82c6b7e69c95bf597fa3c7d37dd11252893c01af
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77193
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the builtin to copy variadic lists/arguments.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I4507b901bdce052c5d1701fdf825eb8a96a5b55a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77097
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ie4032048f5f53b25c46f00b3b48eb5f986a5d0b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Fix regression introduced in I25e757108e0dd473969fe5a192ad0733f1fe6286
"payloads/external/LinuxBoot: Clean up".
Add creation of the build folder as necessary dependency.
Change-Id: Ie76c914f6a705de0c275a05b5af82ac21243d522
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77202
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I5174e0457489c29be6a2b2b882de2db4255bbca0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This adds a missing prerequisite, because otherwise it can happen that
curl tries to put the downloaded kernel in a non existing build
directory
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I459172f794ab9c1010cebcff5e28f1454e136fba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This upgrades the tint payload to 0.07 version. The sources are
similar enough so that ..._libpayload.patch could be simply git-moved.
Change-Id: I0f6de3d0410e6d838fe49330d98620c877a0d2c7
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76820
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
