summaryrefslogtreecommitdiff
path: root/payloads/libpayload
AgeCommit message (Collapse)Author
2018-07-17libpayload/generic_hub: Detect port disconnect after resetRaul E Rangel
If a port disconnects after a reset we should abort any initialization on the port. This might mean the device has re-enumerated as a 3.0 device so the hub should be scanned again. BUG=b:76831439 TEST=Verified USB-C devices that get detected correctly in depthcharge. Change-Id: Iad899544684312df1bef08d69b5c7f41eac3a21c Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17libpayload/xhci: Check noop return code when debuggingRaul E Rangel
Make it obvious that the command has failed. BUG=b:76831439 TEST=Verified on grunt Change-Id: Ifa0b2fb087f5f0a36ba017a774fc98b33ab035a4 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17libpayload: Add UNKNOWN_SPEED to usb_speed enumRaul E Rangel
xhci_rh_port_speed return -1 if the port is disabled. The usb_speed enum is unsigned so this results in a positive value which implies success. Adding a -1 to the enum will make it signed so the >= 0 check will work correctly. BUG=b:76831439 TEST=verified on grunt that -1 is returned when port is disabled. Change-Id: I98a373717d52dfb6ca4dcc53a00dc1b4c240a919 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-16libpayload: Make libpayload compile using gnu11Raul E Rangel
This matches coreboot. BUG=b:76831439 TEST=emerge-grunt libpayload deptcharge chromeos-bootimage then booted image Change-Id: I3a3baa03e03a31e9e75b201ac4fa642505fc1d3a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-16libpayload/xhci: Document struct offsets on xhci_tRaul E Rangel
This makes it easier to know what offset each register references. BUG=b:76831439 TEST=none Change-Id: I92dcbd463ceb4dd8edbbd97b51a4e9aa32a983a6 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-02payloads/libpayload/drivers/i8042: Disable scanning on disconnectFurquan Shaikh
This change ensures that keyboard scanning is disabled and keyboard is set to default state while disconnecting the keyboard. This is required to ensure that the controller doesn't keep scanning and buffering keystrokes which could lead to OS drivers reading stale data. BUG=b:110024487 TEST=Verified that kernel driver is able to probe correctly even if multiple keys are pressed during handoff from payload to OS. Change-Id: I1ffb8904d545284454c1825ee2e7c0087fc13762 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-02payloads/libpayload/drivers/i8042: Add macros for i8042 commandsFurquan Shaikh
This change adds macros for commands (written to 0x64) and keyboard commands (written to 0x60) for 8042 controller. BUG=b:110024487 Change-Id: I74b2388d048e35b5bdf5bd862d0975e88f1bd6af Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22libpayload: cheza - fix config for chromium chroot buildT Michael Turney
Add CONFIG_LP_CHROMEOS to configuration file Change-Id: I528dee96cf5052b99b8f7573010d98fd80680688 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/26711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-15util/cbfstool: Support FIT payloadsPatrick Rudolph
In order to support booting a GNU/Linux payload on non x86, the FIT format should be used, as it is the defacto standard on ARM. Due to greater complexity of FIT it is not converted to simple ELF format. Add support for autodecting FIT payloads and add them as new CBFS_TYPE 'fit'. The payload is included as is, with no special header. The code can determine the type at runtime using the CBFS_TYPE field. Support for parsing FIT payloads in coreboot is added in a follow on commit. Compression of FIT payloads is not supported, as the FIT sections might be compressed itself. Starting at this point a CBFS payload/ can be either of type FIT or SELF. Tested on Cavium SoC. Change-Id: Ic5fc30cd5419eb76c4eb50cca3449caea60270de Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-04libpayload/curses/{form,menu}: Fix uncountable "information"Elyes HAOUAS
Change-Id: I28c79d0262a54b58d353802e0d572e5b8be5fbc5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-31libpayload-x86: Export keyboard modifiersPatrick Rudolph
Add function to get active keyboard modifiers. Change-Id: Ifc7bd4aa86f20d67c5b542d0458b966e605c5499 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18601 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31libpayload: Export usbhid_getmodifiersPatrick Rudolph
Add a new method to retrieve active usb keyboard modifiers. Change-Id: Ief6679ce782b58b9ced207f4f27504fb2a517b76 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18602 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-30libpayload-x86: i8042: fix i8042_data_ready_ps2 and i8042_data_ready_auxHannah Williams
keyboard_disconnect was called without keyboard_init being called and in this case keyboard_havechar returns true because i8042_data_ready_ps2 is dereferencing uninitialized variable ps2_fifo from within fifo_is_empty causing keyboard_disconnect to be stuck in this while loop. while (keyboard_havechar()) keyboard_getchar(); BUG=b:80299098 TEST=Check if the normal mode path in depthcharge is not causing a hang Change-Id: I944b4836005c887a2715717dff2df1b5a220818e Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/26590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-21libpayload: Fix payload .bss corruptionKyösti Mälkki
Third call to newwin() corrupted payload context. Fix array indexing and check for boundary. Sample payload coreinfo was affected, loader_eax variable got corrupted on my particular build. Change-Id: Iee98901cf57f0689f65ac43aa7e60e8aea092500 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-18libpayload: disable mouse on CHROMEOSPatrick Georgi
We already have that Kconfig flag, so I guess we should use it for consistency. Change-Id: I61ee6a97e369ccfe5c55d4414a5fa91c8d80ecf7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/26351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-15libpayload-x86: Add PS2 mouse driverPatrick Rudolph
Make use of i8042 driver to add PS2 mouse driver support. Tested on Lenovot T500. The touchpad can be used to drive the mouse cursor. Change-Id: I4be9c74467596b94d64dfa510824d8722108fe9c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-15libpayload-x86: keyboard: Use i8042 driverPatrick Rudolph
Make use of i8042 driver in keyboard.c. Required to add PS/2 mouse support. Tested on Lenovo T500. Change-Id: If60b5ed922b8fc4b552d0bfd9fe20c0fd6c776bf Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18596 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-15libpayload-x86: Move keyboard.cPatrick Rudolph
Move keyboard.c into i8042 folder. Change-Id: Idd30a9082e48a451d9fe5ead3f3dda4e6396b50c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18595 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-15libpayload-x86: Add common i8042 driverPatrick Rudolph
Add a common i8042 driver that uses multiple overflowing fifos to seperate PS/2 port and PS/2 aux port. Required to support PC keyboard and PC mouse at the same time. Tested on Lenovo T500. Change-Id: I4ca803bfa3ed45111776eef1f4dccd3fab02ea39 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18594 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-04cbfs: Rename CBFS_TYPE_PAYLOAD to CBFS_TYPE_SELFPatrick Rudolph
In preparation of having FIT payloads, which aren't converted to simple ELF, rename the CBFS type payload to actually show the format the payload is encoded in. Another type CBFS_TYPE_FIT will be added to have two different payload formats. For now this is only a cosmetic change. Change-Id: I39ee590d063b3e90f6153fe655aa50e58d45e8b0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-05-02payloads/libpayload: Add spaces around '=='Elyes HAOUAS
Change-Id: Ie1da925aceb01c2d21b472bf171000803004578f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-05-01libpayload: Add Timer for sdm845T Michael Turney
Uses ARCH64 Timer TEST=build Change-Id: Ic312bcf3bc7e80482b7f038e2dbc4abaaffd5956 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-05-01libpayload: Add raw_read_ functionsT Michael Turney
Add: raw_read_cntfrq_el0() and raw_read_cntpct_el0() Required to support Arch64 Timer Change-Id: I86aa97039304b9e9336d0146febfe1811c9e075a Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-29libpayload/drivers/usb/ohci_private.h: Add parentheses around macroElyes HAOUAS
Change-Id: Ib90564e32f5ff204aa5d856024b7eed2624a77b7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-27libpayload/include/queue.h: Remove trailing whitespaceElyes HAOUAS
Change-Id: I7ff676f51958e12c40a82f56e68a776ddf429228 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-27libpayload/curses/form: Remove trailing whitespaceElyes HAOUAS
Change-Id: I231ea26e8d8bfc53da22a440451802b425c996b0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-27payloads/libpayload/curses/menu: Remove trailing whitespaceElyes HAOUAS
Change-Id: Ia4bd5224a77914e0561fa35a18aec8db16bff320 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-19libpayload: Move GDB functions to stdlib.hJulius Werner
When GDB support is compiled in, halt() in libpayload will call gdb_enter(). halt() is defined in <stdlib.h> and gdb_enter() in <libpayload.h>. Usually files just include <libpayload.h> so this is not a problem, but in some situatons a payload may just include <stdlib.h> (or a file including it like <assert.h>), leading to an undeclared identifier here. Move the GDB functions to <stdlib.h> to solve this. Change-Id: I7b23b8ac9cd302aa6ef96f24565130490ac40071 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25730 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17Use git HTTP URLs without `/p` in itPaul Menzel
Change-Id: I9972b138c6dd2a289880c4ec8b3fe64fc3baa66b Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/25545 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-23arch/arm64/armv8/mmu: Add support for 48bit VAPatrick Rudolph
The VA space needs to be extended to support 48bit, as on Cavium SoCs the MMIO starts at 1 << 47. The following changes were done to coreboot and libpayload: * Use page table lvl 0 * Increase VA bits to 48 * Enable 256TB in MMU controller * Add additional asserts Tested on Cavium SoC and two ARM64 Chromebooks. Change-Id: I89e6a4809b6b725c3945bad7fce82b0dfee7c262 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/24970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-16libpayload: usbhid: Zero-initialize all parts of usbhid instance structJulius Werner
The USBHID driver zero-initializes some but not all of the fields in its usbhid_inst_t structure. This is a problem because under some circumstances, some of the uninitialized fields may be read and lead to incorrect behavior. Some (broken) USB keyboards keep sending reports that contain all zeroes even when they have no new keys... these usually get silently ignored, but if the usbhid_inst_t structure is in an inconsistent state where 'previous' is zeroed out but 'lastkeypress' is non-zero because it wasn't properly initialized, these reports will be interpreted as keyrepeats of the bogus 'lastkeypress'. This patch changes the code to just xzalloc() the whole structure so we won't have to worry about initialization issues anymore. Change-Id: Ic987de2daaceaad2ae401a1e12b1bee397f802ee Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-01-26libpayload: allow x86 devices to provide non-tsc implementationAaron Durbin
Make is so that a different timer source can be provided instead of TSC on x86 platforms. BUG=b:72378235,b:72170796 Change-Id: I6faeecf7624a5aa4e1af8862036f1fbd2f54eb51 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-07libpayload: Add pci_free_dev() and some boilerplateNico Huber
Add just enough code and boilerplate to keep it compatible with future libflashrom. Change-Id: If0d46fab141da525f8f115d3f6045a8c417569eb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-07libpayload: Add SKU ID coreboot table supportJulius Werner
This patch adds support to read the SKU ID entry from the coreboot table that was recently added in coreboot. Change-Id: I1c3b375da6119a4f8e8e7e25a11644becb90f927 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22743 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07libpayload: Minor board ID / RAM code cleanupsJulius Werner
This patch mirrors recent cleanups in coreboot regarding the strapping ID entries in the coreboot table. Change-Id: Ia5c3728daf2cb317f8e2bc72c6f1714d6cb4d080 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-06endian: Fix bebitenc() to actually encode big-endianJulius Werner
bebitenc() just runs a downward loop over the same body as lebitenc(). That doesn't give you a byte-swapped result, it gives you the same final value, just starting from the other side to fill it in. (Also, it confused i++ and i--, so it really gives you a compiler error.) The correct code needs to have the array index inverted relative to the bit shift index to produce a big endian result. Change-Id: I5c2da3a196334844ce23468bd0124bbe2f378c46 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-29LB_TAGS: change the value of CB_TAG_MAC_ADDRS to 0x33Ronald G. Minnich
When building the Go version of cbmem I found that LB_TAG_MAC_ADDRS has the same value as LB_TAG_VERSION_TIMESTAMP. I am guessing that this tag was little used. In any event, move it forward to 0x33. Change-Id: I038ad68e787e56903a2ed9cb530809a55821c313 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/22218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-02libpayload/storage: Add Sunrise Point AHCI PCI idNico Huber
Change-Id: I9645d76d05014722e4ae0c398d82f7f8e34d6f1c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/21289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21libpayload: add time()Nicola Corna
Change-Id: I97e393537ccc71ea454bb0d6cdbbb7ed32485f1e Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/21011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-14libpayload: add *SECS_PER_SEC macros to stddef.hCaveh Jalali
this adds convenience definitions for MSECS_PER_SEC, USECS_PER_MSEC, and USECS_PER_SEC along the lines of the time units in coreboot's <timer.h>. Change-Id: I489dc2d1ff55d137936acec74ac875dc7fbc1713 Signed-off-by: Caveh Jalali <caveh@google.com> Reviewed-on: https://review.coreboot.org/20882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-11copy & update test routines from what-jenkins-doesMartin Roth
Currently the only testing we had was 'what-jenkins-does' and 'make lint'. While the lint testing is suitable for developers, the 'what-jenkins-does' target really isn't, as it was designed specifically for testing on jenkins. This adds the infrastructure for basic tests that are more suitable for the developer. Extended tests and improvements will follow. Add the coreboot-builds directories to .gitignore. TODO: - Save/restore .config - Update test-abuild to use existing COREBOOT_BUILD_DIR variable Change-Id: I19e1256d79531112ff84e47a307f55791533806f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@google.com>
2017-08-10libpayload/libpci: Add a constant for PCI class memory otherNico Huber
Change-Id: I71e902c4ec843608c1518fe1e8b90fbcf98a13d1 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-10libpayload: Use a static copy of `font_glyph_filled()`Paul Menzel
libpayload needs a static copy of the out of line function `font_glyph_filled()` in every TU that needs it. So make it static inline. This fixes a build error by gcc (Debian 7.1.0-12) 7.1.0 from Debian Sid/unstable. This happens with any libpayload based payload like coreinfo, nvramcui or tint. ``` […] LPCC build/coreinfo.elf (LINK) /src/coreboot/payloads/coreinfo/build/libpayload/bin/../lib/libpayload.a(corebootfb.libc.o): In function `corebootfb_putchar': /src/coreboot/payloads/libpayload/drivers/video/corebootfb.c:173: undefined reference to `font_glyph_filled' […] ``` Change-Id: I931f0f17b33abafdc49aa755a0dad65e28820750 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/20897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-08add __must_check to */compiler.hCaveh Jalali
the __must_check function attribute is pretty much straight from the linux kernel - used to encourage callers to consume function return values. Change-Id: I1812d957b745d6bebe2a8d34a9c4862316aa8530 Signed-off-by: Caveh Jalali <caveh@google.com> Reviewed-on: https://review.coreboot.org/20881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-03libpayload: video: Add support for font scaling with a factorPaul Kocialkowski
This introduces support for font scaling with a factor provided via Kconfig. In practice, the font itself is not scaled at any point in memory and only the logic to determine whether a pixel should be filled or not is changed. Thus, it should not significantly impact either the access time or memory use. Change-Id: Idff210617c9ec08c6034aef107cfdb34c7cdf029 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/20709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-03libpayload: video: Introduce helpers for font accessPaul Kocialkowski
This introduces helpers for accessing the included font, instead of using hardcoded values provided by the font's header itself. It will allow painlessly adding support for font scaling in a subsequent change. It should not introduce any functionality change. Change-Id: I0277984ec01f49dc51bfc8237ef806f13e3547e2 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/20708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-28libpayload: Double HEAP_SIZE in default configRicardo Ribalda Delgado
Bettong board with the standard configuration is not capable of running nvramui with the default size. malloc error happens on PDC_makelines(). Resulting in: Booting from CBFS... Run img/nvramcui Calling addr 0x00100000 initscr(): Unable to create stdscr. exited with status 1 Change-Id: I56a0fb3319fe77599bf3dd6c328a0b70be60a348 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/20681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-07-27libpayload/storage: Replace 1s AHCI reset delay with a timeoutNico Huber
AHCI spec explicitly states that we may poll. TEST=Ran FILO on kontron/bsl6 and observed that the controller always becomes ready during the first delay. Change-Id: If34694abff14d719d10d89bc6771dbfa12065071 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-07-27libpayload/storage: Enable bus mastering for AHCINico Huber
This is (thankfully) not done by coreboot any more for recent chipsets. Change-Id: If56e38037f7b1e53871ee63e6ff297028c59d493 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-07-26libpayload: Clean up unaligned memset() supportNico Huber
Use a `for` instead of a `while` loop and use meaningful identifiers. Also, don't use more than one variable for one and the same purpose, don't use more (non-const) variables than necessary, don't alter more than one variable per statement, don't compare pointers of different types and don't do pointer arithmetic on `void *`. This was meant as a fix up to a regression but that has already been fixed. Change-Id: I0c8fd118d127a26cfcf68bfb0bf681495821e80a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-20libpayload: Fix unaligned buffer logic in default_memsetMarshall Dawson
Fix an issue when setting an unaligned buffer where n is less than the difference of the rounded up pointer and the pointer. This was identified where n=1 was passed. n was decremented once, as expected, then decremented again after the while() evaluated to false. This resulted in a new n of 4GB. Change-Id: I862671bbe7efa8d370d0148e22ea55407e260053 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13libpayload: Support unaligned pointer for memcpy, memmove and memcmpJeremy Compostella
The memcpy(), memmove() and memcmp() functions use word by word operations regardless of the pointer alignment. Depending on the platform, this could lead to a crash. This patch makes the memcpy(), memmove() or memcmp() operate byte per byte if they are supplied with unaligned pointers. Change-Id: I0b668739b7b58d47266f10f2dff2dc9cbf38577e Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/20535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-12libpayload: Support unaligned pointers for memsetJeremy Compostella
The optimization of the memset() function introduced by commit dbadb1dd634c8c9419215ade0666a7fb69a4447b (libpayload: Reorder default memcpy, speed up memset and memcmp) is provoking an issue on x86 platform when compiling without the CONFIG_GPL option. GCC is making use of the movdqa instruction to copy words. This instruction can raise a "General Protection Fault Exception" when it is called on a non-aligned address argument. Change-Id: I73382a76a4399d8e78244867f2ebb1dca176a6bf Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/20524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-28libpayload: Add mouse cursor driverPatrick Rudolph
Add a driver to handle multiple low level mouse drivers and provide basic cursor acceleration support. Tested on Lenovo T500. Change-Id: Ib7cec736631b8acf81a14d28daa29ff720777b10 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28payloads: Add whitespace around '<<'Elyes HAOUAS
Change-Id: I0659f6ec59fb808b4cedf57d60d737c13c250042 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20396 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27libpayload/drivers/usb/ehci_private.h: Add brackets around macroElyes HAOUAS
Change-Id: Iee8dc03d5a4ca7537c7da4fed2c67b169c9e2422 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27libpayload/drivers/usb/xhci_private.h: Add parentheses around macroElyes HAOUAS
Change-Id: I0347594e9480dedc4845b6863733a67fc5e47e1c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20371 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-27libpayload/drivers/usb/ohci_private.h: Add brackets around macroElyes HAOUAS
Change-Id: Id4892adba161cd08eecde71a011384b6c465b98f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27libpayload: corebootfb: Add null check for framebuffer addressDuncan Laurie
If the framebuffer address is zero the corebootfb_init() function should abort and not attempt to use it for video, otherwise it will likely hang. This was tested by booting on a board that does not have a display attached and includes the previous patch to zero the framebuffer structure in the coreboot tables. Change-Id: I53ca2e947a7915cebb31b51e11ac6c310d9d6c55 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-26libpayload: Enable building libpayload with march=i586Lee Leahy
Add a Kconfig value to enable building libpayload with the 586 compiler. Update the cross compiler script to add the Kconfig value name that is used when libpayload builds. The Quark SOC does not support some of the instructions generated with the 686 compiler (e.g. CMOV). Success occurs when payloads/libpayload/build/config.h indicates that CONFIG_LP_USE_MARCH_586=1. TEST=Build and run on Galileo Gen2. Change-Id: I04907e9a38ee139bae2e8b227821f54614707c25 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26libpayload/configs: Add configuration for GalileoLee Leahy
Add the default configuration file for the Galileo board. The Quark SOC requires building libpayload with march=i586. TEST=Build and run on Galileo Gen2 Change-Id: Ifd4b533feacbab6f0d357e13d8cebb64bc1c18c6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-07payloads: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I2ec18ca55e0ea672343a951ab81a24a5630f45fd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-07Use www.coreboot.org over coreboot.orgPaul Menzel
<https://coreboot.org> is redirected to <https://www.coreboot.org>. ``` $ curl -I https://coreboot.org HTTP/1.1 301 Moved Permanently Server: nginx/1.8.1 Date: Mon, 05 Jun 2017 10:41:33 GMT Content-Type: text/html Content-Length: 184 Connection: keep-alive Location: https://www.coreboot.org/ ``` So use the command below to use the final location to save a redirect. ``` $ git grep -l https://coreboot.org \ | xargs sed -i 's,https://coreboot.org,https://www.coreboot.org,g' ``` Change-Id: I4176c20ef31399f0063b41e3a0029cca0c1b0ff3 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20035 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-07Use more secure HTTPS URLs for coreboot sitesPaul Menzel
The coreboot sites support HTTPS, and requests over HTTP with SSL are also redirected. So use the more secure URLs, which also saves a request most of the times, as nothing needs to be redirected. Run the command below to replace all occurences. ``` $ git grep -l -E 'http://(www.|review.|)coreboot.org' | xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g' ``` Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-30arm64: Align cache maintenance code with libpayload and ARM32Julius Werner
coreboot and libpayload currently use completely different code to perform a full cache flush on ARM64, with even different function names. The libpayload code is closely inspired by the ARM32 version, so for the sake of overall consistency let's sync coreboot to that. Also align a few other cache management details to work the same way as the corresponding ARM32 parts (such as only flushing but not invalidating the data cache after loading a new stage, which may have a small performance benefit). Change-Id: I9e05b425eeeaa27a447b37f98c0928fed3f74340 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-25detachables: Add invert parameterShelley Chen
Instead of storing inverted-colored bitmaps, invert drawing of text bitmap on the fly by adding an invert parameter down to libpayload. Merging pivot and invert fields into flags field. BUG=b:35585623 BRANCH=None TEST=Make sure compiles successfully CQ-DEPEND=CL:506453 Change-Id: Ide6893a26f19eb2490377d4d53366ad145a9e6e3 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01cbgfx: Add portrait screen supportNickey Yang
cbgfx currently does not support portrait screen which height >width. so add it. Change-Id: I66fee6d73654e736a2db4a3d191f030c52a23e0d Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19474 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-29libpayload/gdb: fix unused variable warningPatrick Georgi
input_underrun is defined but not used. A reasonably new compiler, enabled warnings and warnings-as-error make the build break for no good reason. Change-Id: Ibeb7ba53aad5738938093ab7b34695c9c99c9afe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/19482 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-04-20Turn CBMEM console into a ring buffer that can persist across rebootsJulius Werner
This patch allows the CBMEM console to persist across reboots, which should greatly help post factum debugging of issues involving multiple reboots. In order to prevent the console from filling up, it will instead operate as a ring buffer that continues to evict the oldest lines once full. (This means that if even a single boot doesn't fit into the buffer, we will now drop the oldest lines whereas previous code would've dropped the newest lines instead.) The console control structure is modified in a sorta backwards-compatible way, so that new readers can continue to work with old console buffers and vice versa. When an old reader reads a new buffer that has already once overflowed (i.e. is operating in true ring buffer mode) it will print lines out of order, but it will at least still print out the whole console content and not do any illegal memory accesses (assuming it correctly implemented cursor overflow as it was already possible before this patch). BUG=chromium:651966 TEST=Rebooted and confirmed output repeatedly on a Kevin and a Falco. Also confirmed correct behavior across suspend/resume for the latter. Change-Id: Ifcbf59d58e1ad20995b98d111c4647281fbb45ff Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18301 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19libpayload/libc/console: Flush input driver buffer on initFurquan Shaikh
When console input driver registers itself, perform flush of input buffer to avoid interpreting any stale key presses before libpayload is run. keyboard.c: Remove the redundant buffer flush. 8250.c: Ensure that serial_hardware_is_present is set before call to add input driver. BUG=b:37273808 TEST=Verified that any key presses in serial console before payload is up do not have any effect after the payload starts running. Change-Id: I46f1b6715ccf6418f5b2c741bf90db2ece26a60d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19345 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-17libpayload: cbgfx: Show square images on portrait displaysJulius Werner
CBGFX currently doesn't support portrait screens at all. This will have to be fixed eventually but might take a bit of effort. As a first step to make devices with a portrait panel somewhat usable, this patch will just force a square canvas on these panels and keep the bottom part of the screen black. Also switch set_pixel to calculate framebuffer position via bytes_per_line instead of x_resolution. This is supposed to be the canonical way to do that and may differ in cases where the display controller requires a certain alignment from framebuffer lines. Change-Id: I47dd3bf95ab8a7d8b7e1913e0ddab346eedd46f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19279 Tested-by: build bot (Jenkins) Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2017-04-07libpayload: Add gru configPaul Kocialkowski
This adds a gru libpayload config, that should fit all gru-based devices such as kevin. As gru-based devices are CrOS devices, select the associated config to enable CrOS-specific features. Change-Id: I6e79b763fc497c126612b8786a669a33b57ea29f Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/19137 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-03-15libpayload: usbhub: Force enumeration of all connected ports on initJulius Werner
We have found a non-compliant USB hub (RealTek RTS 5413) that does not set a port's Connect Status Change bit on its USB 3.0 half if the port had already been connected while the hub was being reset. To work around this bug, this patch adds code to initially request the status of every port after a hub was enumerated, clear the Connect Status Change bit if set, and then enumerate the port iff it is currently connected, regardless of whether the change bit was set. A similar behavior can also be found in the Linux kernel. BRANCH=oak BUG=b:35929438 TEST=Booted Elm with this change, my USB 3.0 sticks enumerate now even if they had been plugged in since boot. Change-Id: I8a28252eb94f005f04866d06e4fc61ea265cee89 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18729 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-08libpayload-x86: Enable SSE and FPU when presentPatrick Rudolph
Allows to use SSE and floating point in payloads without digging to much into x86 assembly code. Tested on Lenovo T500 (Intel Core2Duo). Both floating point operation and SSE is properly working. Change-Id: I4a5fc633f158de421b70435a8bfdc0dcaa504c72 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18345 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-23libpayload: Add oak configPaul Kocialkowski
This adds an oak libpayload config, that should fit all oak-based devices such as elm. Change-Id: Iabb71404ff84029a5976371a353e8c92e781ca1f Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/18447 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-02-17libpayload: multiboot - support meminfo flagMathias Krause
Some simple implementation of the MultiBoot protocol may not pass a memory map (MULTIBOOT_FLAGS_MMAP missing in the flags) but just the two values for low and high memory, indicated by the MULTIBOOT_FLAGS_MEMINFO flag. Support those kind of boot loaders too, instead of falling back to the hard-coded values in lib_get_sysinfo(). Tested with a multiboot enhanced version of FILO. Change-Id: I22cf9e3ec0075aff040390bd177c5cd22d439b81 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18350 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-17libpayload: x86/head - implement argc/argv handlingMathias Krause
Implement the argc/argv passing as described in coreboot’s payload API: http://www.coreboot.org/Payload_API While at it, give the code some love by not needlessly trashing register values. Change-Id: Ib830f2c67b631b7216843203cefd55d9bb780d83 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-17libpayload: x86/exec - simplify and robustify the codeMathias Krause
Simplify the code by directly using the arguments on the stack as base pointer relative memory references, instead of loading them into intermediate registers first. Make it more robust by preserving all callee saved registers mandated by the C calling convention (and only those), namely EBP, EBX, ESI and EDI. Don't assume anything about the register state when the called function returns -- beside the segment registers and the stack pointer to be still the same as before the call. Change-Id: I383d6ccefc5b3d5cca37a1c9b638c231bbc48aa8 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18335 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-17libpayload: x86/main - propagate return value of main()Mathias Krause
According to coreboot’s payload API [1], the called payload should be able to return a value via %eax. Support this by changing the prototype of start_main() and pass on the return value of main() to the caller instead of discarding it. [1] https://www.coreboot.org/Payload_API Change-Id: I8442faea19cc8e04487092f8e61aa4e5cba3ba76 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18334 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17libpayload: x86/exec - fix argc/argv value passingMathias Krause
According to coreboot’s payload API [1] the argc value should be passed at stack offset 0x10, so we need to push a dummy value to comply to the API. [1] https://www.coreboot.org/Payload_API Change-Id: Id20424185a5bf7e4d94de1886a2cece3f3968371 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-15libpayload: x86/exec - fix return value passingMathias Krause
The pointer to write the return value to is in %ecx, not %eax. Writing to (%eax) leads to memory corruptions as %eax holds the return value, e.g. would write zero to address zero for a "successful" returning payload. Change-Id: I82df27ae89a9e3d25f479ebdda2b50ea57565459 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18332 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-15libpayload: x86/exec - fix libpayload API magic valueMathias Krause
According to coreboot’s payload API [1] the magic value passed to the payload should be 0x12345678, not 12345678. Fix that. [1] https://www.coreboot.org/Payload_API Change-Id: I10a7f7b1a4aec100416c5e7e4ba7f8add10ef5c5 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18331 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-25libpayload: fix buildPatrick Georgi
When .xcompile doesn't already exist, building libpayload fails because the CC variable (et al) remain empty since .xcompile is only included after the variables coming from there are evaluated. Change-Id: I73f1cbced95afcff15839604fea5fd05d81bc3d3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18228 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24build system: don't run xcompile or git for %clean/%config targetsPatrick Georgi
It takes a long time for no gain: We don't need to update the submodules, we don't need to fetch the revision, we don't need to find the compilers, when all we want to do is to manipulate the .config file or clean the build directory. Change-Id: Ie1bd446a0d49a81e3cccdb56fe2c43ffd83b6c98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18182 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24libpayload: drivers/keyboard: report power button eventsShelley Chen
Power button events are usually dropped because the button is not in the keyboard matrix range. Add condition to forward it like other keys. BUG=chrome-os-partner:61275 BRANCH=None TEST=reboot and make sure power button selection in depthcharge's detachable menus is processed on reef. Change-Id: I86897fa8d73a56533ef62bba05458ac3d339237e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 25654e214f0ab8685d445ced62612a02be851126 Original-Change-Id: I516a0043bd7730789728d5c5498d0a0f30a2acac Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/428199 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://review.coreboot.org/18177 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-19libpayload: Enable USB HID in veyron configurationPaul Kocialkowski
This enables USB HID support in the veyron config, since it seems to work correctly and is needed for interaction with depthcharge on devices without an embedded keyboard (such as veyron_mickey). Change-Id: Icae829e3a132005df17bcb6f7e6f8a190912576d Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/17930 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-01-13libpayload: usb: Reset ohci controller when trying to shutdown ohciJeffy Chen
Currently we just disabled ohci interrupts when calling ohci_shutdown, Which would not actually shutdown the ohci controller, for example it may still written the increased HccaFrameNumber to Hcca buffer. Perform a soft reset to ohci controller as the linux kernel ohci-hcd driver does. BUG=chrome-os-partner:60996 BRANCH=None TEST=Checked on gru, no more "BUG: Bad page state" error in kernel. Change-Id: I128ab6ba455ac5383a4d48be0bc12b8bb4533464 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4749fc82fdd1b74ca3f2ed3fdf0ef53a5e161087 Original-Change-Id: I3f192aea627ba2fa69533bc0a4270466ca18f2a7 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/426338 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/18125 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-13libpayload: Add VPD address into lib_sysinfoKan Yan
BUG=chrome-os-partner:56947 TEST=Verifed country code can be parsed from VPD in depthcharge. BRANCH=None Change-Id: I2fbbd4a784c50538331747e1ef78c33c6b8a679b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: acea6e2a200e8bd78fd458255ac7fad307406989 Original-Change-Id: I4616fefc6a377d7830397cdadb493927358e25cc Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/425819 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18124 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-13libpayload: Update ARM CrOS devices configurationPaul Kocialkowski
This updates the configuration for ARM CrOS devices (nyans and veyrons) by using the CHROMEOS Kconfig option, thus reducing the number of options to select. It also brings proper serial console support. Change-Id: Iffc84c44a1d339c5bb575fbaffc40bc2d56bb6cf Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/17928 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-01-06libpayload: usb: handle situation with no free device addressPatrick Georgi
Change-Id: I1308bdca90f1a09d980f384ee85552198a39b965 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1260940 Reviewed-on: https://review.coreboot.org/18036 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06libpayload: xhci: plug leakPatrick Georgi
Change-Id: Ia163872846906c6c78144a984a405812f856f626 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1325835 Reviewed-on: https://review.coreboot.org/18035 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06libpayload: timer: cast cpu_khz to make sure 64bit math is usedPatrick Georgi
Change-Id: Iaf84de2330b433076a66c22fa72ffb45e957c0dc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1261177 Reviewed-on: https://review.coreboot.org/18034 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-21libpayload: Get current tick from high register in generic timerPaul Kocialkowski
This fixes the generic timer driver to get the current tick from the high register, so that comparison with the high count value (obtained previously from the same register) has a chance to succeed. Change-Id: I5ce02bfa15a91ad34641b8e24813a5b7ca790ec3 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/17929 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-14libpayload/drivers/video: Improve check in if conditionPatrick Georgi
Coverity considers this a copy&paste error, and maybe it is. In any case, it makes sense to check the variable that (if the condition is true) is changed, and the values are the same before that test, so the change is harmless. Change-Id: I163c6a9f5baa05e715861dc19643b19a9c79c883 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1347376 Reviewed-on: https://review.coreboot.org/17837 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-14libpayload/.../PDCurses: Improve compatibility with ncursesPatrick Georgi
Coverity erroneously complains that we call wmove with x or y == -1, even though our copy of that function properly checks for that. But: setsyx is documented to always return OK (even on errors), so let it do that. (and make coverity happy in the process) Change-Id: I1bc9ba2a075037f0e1a855b67a93883978564887 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1260797 Reviewed-on: https://review.coreboot.org/17836 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-14libpayload/.../PDCurses: avoid reading orig before NULL checking itPatrick Georgi
Coverity complains and that (unfortunately) means that some compiler might take advantage of the same fact. Change-Id: I59aff77820c524fa5a0fcb251c1268da475101fb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1261105 Reviewed-on: https://review.coreboot.org/17835 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-08libpayload: Add Cougar Point PCH's AHCI to whitelistNico Huber
Change-Id: Ie8ca342a32323be4c26c236a5209052ec724317f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17353 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-25libpayload: increase MAX_ARGC_COUNTJeremy Compostella
MAX_ARGC_COUNT limits the payload to ten parameters which is not enough when used with a proprietary first stage bootloader providing hardware description using around 20 parameters. This patch makes the libpayload able to get up to 32 parameters. Change-Id: I49925040d951dffb9c11425334674d8d498821f2 Signed-off-by: Jeremy Compostella <jeremy.compostella@gmail.com> Reviewed-on: https://review.coreboot.org/17467 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17libpayload: Reintroduce CONFIG_LP_CHROMEOS to set suitable defaultsJulius Werner
Chrome OS builds always have some inherent differences to "standard" libpayload configurations: they don't want to use curses or things like storage drivers, they always use the coreboot framebuffer and USB, etc. This patch reintroduces CONFIG_LP_CHROMEOS as an option that only affects Kconfig defaults. This allows Chrome OS builds to select most of what they need in one go and reduces board-specific .config files to only the options that are really specific to that board. Also restricts the 8250_SERIAL_CONSOLE Kconfig to only default to yes on x86 boards, which probably makes sense for all of libpayload (some but far from all ARM boards use 8250-compatible UARTs, and we should probably not default a platform option unless it's going to be correct with very high probability). BRANCH=None BUG=None TEST=Built and booted Jerry and Oak. Change-Id: Ie0c0593ffd399608d2cbfb83d20891f6f1864914 Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Commit-Id: e558f59 Original-Change-Id: I609637cd2ea7dfb4558aa3c04c90b64038c9ab57 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347970 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17024 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>