aboutsummaryrefslogtreecommitdiff
path: root/payloads/libpayload
AgeCommit message (Collapse)Author
2012-11-15libpayload: Always use virtual pointers in struct sysinfo_tNico Huber
We had mixed virtual and physical pointers in struct sysinfo_t. Some being virtual by accident which led to problems when we tried to reinitialize lib_sysinfo after relocating FILO (to get intentionally virtual pointers valid again). I guess this didn't cause much trouble before, as lib_get_sysinfo() was always called with physical addresses being equal to their virtual counterparts. For FILO, two possibilities seem practical: Either, have all pointers in struct sysinfo_t physical, so relocation doesn't hurt. Or, have all pointers virtual and call lib_get_sysinfo() again after relocation. This patch goes the latter way, changing the following pointers for situations where virtual pointers differ from physical: .extra_version .build .compile_time .compile_by .compile_host .compile_domain .compiler .linker .assembler .cb_version .vdat_addr .tstamp_table .cbmem_cons .mrc_cache We could also just correct the accidentally virtual pointers. But, IMO, this would lower the risk of future confusion. Note 1: Looks like .version gets never set. Note 2: .option_table and .framebuffer were virtual pointers but treated like physical ones. Even in FILO, this led to no problems as they were set before relocation. Change-Id: I4c456f56f049d9f8fc40e62520b1d8ec3dad48f8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1855 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-15libpayload: Use #ifdef for CONFIG_* checksNico Huber
Libpayload uses the linux kernel's config style, where CONFIG_* defines don't get written for unset tristates. Change-Id: I3f832cf86bca9a1e153d96af4bf6434a19eba2f6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1847 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-14libpayload: Add init() function to hci_t and rework uhci_reset()Nico Huber
uhci_reset() differs in semantics compared to the other HCI's reset() implementations. uhci_reset() does some initialization work after a controller reset. So move the initialization part to a new function, uhci_reinit(), which get's exported through a new entry in hci_t: hci_t.init(). Warning: This breaks code that relies on the current, special, counterintuitive behaviour of uhci_reset(). If one wants a working host controller after calling hci_t.reset(), he should call hci_t.init() afterwards. Change-Id: Ia7ce80865d12d11157645ce251f77f349f8e3c34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1851 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Do not call ohci_reset() from ohci_init()Nico Huber
When ohci_reset() was implemented, OHCI controllers stopped working since the stub ohci_reset() is called at the end of ohci_init(). This is fixed by removing the call. To prevent further problems the call to the xhci_reset() stub is removed, too. Change-Id: If89825c8e6caf40f7f4fe078e8b2e90054a54ba2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1850 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Free usb host controller instance after shutdownNico Huber
All shutdown() implementations but ehci_shutdown() free the hci_t structure. This seems correct and the reference to the hci_t shouldn't be used after shutdown(), so do it in ehci_shutdown(), too. Change-Id: Ie3506d769e73007735f3211710734a5f0107e43a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1849 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Document USB host controller setup functionsNico Huber
The semantics of the controller functions, start(), stop(), reset() and shutdown(), are not self-explanatory which let to some confusion. At least the reset() functions of the different host controller drivers were implemented following different interpretations. Let's make the intended behaviour of these functions clear. The stated inconsistencies will be addressed in following commits. Change-Id: Id2e300f65c21039218b6ba3f87c0fcd4f0dda0a8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1848 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Export device count in storage interfacePatrick Georgi
FILO can use this as offset to enumerate AHCI and its own IDE devices together. Change-Id: I57380e7bd1df6db5c882427e9a34d068f4348fb2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1846 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12libpayload: Use EXTRA_CFLAGS for additional GCC optionsGabe Black
-CFLAGS = $(INCLUDES) -O2 -pipe -g +CFLAGS = $(EXTRA_CFLAGS) $(INCLUDES) -Os -pipe Change-Id: Icb228d173312a974746e72b6bbae059103b837fc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1723 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Add an option to skip console initialization on startup.Gabe Black
A payload may want to decide whether it uses certain input/output consoles, or that it wants support for outputing to a particular device but not to use that device as a console. This change adds a config option which skips the call to console_init in start_main. Change-Id: I32b224d4d0bd3a239b402ecb09ee907d53225735 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1732 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09libpayload: Add CB_ prefixes to some constants in coreboot_tables.h.Gabe Black
This makes their names more consistent with other constants in this header, avoids name collisions, and makes it more obvious where the names came from. Change-Id: I7b8bd4ada0fbaf049f35759a907281265f5bb2e6 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1729 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09libpayload: Change "GPIOs" into flags.Gabe Black
Some constants which were used to interpret the contents of the coreboot tables were moved to the appropriate libpayload header file. The constant which describes the maximum length of a GPIO name was renamed to have a CB_ prefix. That makes it more obvious what sort of GPIO name it describes, and reduces the change of a name collision. It also makes it more consistent with other names in that header, although some other exceptions still exist. Change-Id: I6c0082b3198d34e8a78507fbfac343ee8facf0dc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1728 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09[PATCH] libpayload: Implement EHCI reset functionAnton Kochkov
Added ehci_reset() function to do a full reset of the host controller Change-Id: Ia48db8462ebbb8f260813eb6ba8349d002c4678b Signed-off-by: Anton Kochkov <a.kochkov@securitycode.ru> Reviewed-on: http://review.coreboot.org/1814 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Add a function to retrieve the rows and cols of the video console.Gabe Black
This is useful if you need to put some text in a particular place on the screen, for instance in the middle. Change-Id: I3dae6b62ca1917c5020ffa3e8115ea7e8e5c0643 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1734 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Separate video initialization and the video console.Gabe Black
It's possible to want to display text on the display without using it as a console. This change separates the initialization of the video code from setting up the video console by pulling out everything but installing the console into a new function called video_init. Change-Id: Ie07654ca13f79489c0e9b3a4998b96f598ab8513 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1733 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Add support for the CBMEM in memory console.Gabe Black
Change-Id: I1489b5306ef1ca078686fed4dba2d242f70ad941 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1727 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Refactor the endianness conversion functions and header files.Gabe Black
The endianness of an architecture is now set up automatically using Kconfig and some common code. The available conversion functions were also expanded to go to or from a particular endianness. Those use the abbreviation le or be for little or big endian. Built for Stumpy and saw coreinfo cbfs support work which uses network byte order. Used the functions which convert to little endian to implement an AHCI driver. The source arch is also little endian, so they were effectively (and successfully) inert. Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Update libpayloads understanding of the coreboot tables.Gabe Black
Give it somewhere to put the new info in sysinfo, and tell it how to parse the new tables which it doesn't yet understand. Change-Id: I01d3318138696e6407553c27c1814f79e3fbc4f8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-07libpayload: Turn the "debug" #define into the usb_debug static inline function.Gabe Black
The "debug" macro used internally in the libpayload USB subsystem was very generically named and would leak into consumers of the library that included usb.h directly or indirectly. This change turns that #define from a macro into a static inline function to move away from the preprocessor, and also renames it to usb_debug so it's less likely to collide with something unrelated. Change-Id: I18717df111aa9671495f8a2a5bdb2c6311fa7acf Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1738 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Take usb_poll out of usb_initialize.Gabe Black
While it might be slightly more convenient to not have to call usb_poll manually after calling usb_initialize, you'll still likely want to call it before trying to use a USB device since one have have been hotplugged since you last looked. By not calling usb_poll, usb_initialize completes quickly and can be called unconditionally without a long delay. The delay can be put off until later when we're sure it's necessary. Change-Id: Ib8b1bdea996702c42d1b7021f492d9f8e174d304 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1737 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Make usb_initialize more efficient and fix style problems.Gabe Black
The usb_initialize function would scan for USB host controllers by brute force iterating over all possible busses, devices, and functions. This change makes it recursively scan busses only if it finds them on the other side of a bridge, and only scan for functions beyond function 0 if the device claims to be multifunction. This change also takes the opportunity to clean up some style problems throughout the file. Change-Id: I0f5e8b9a454a42a76d30bccca898c8e1af770b2b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1736 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Add definitions for more config space registers.Gabe Black
Change-Id: I02cf353ce7c955cb11ca11c0d5b8aa630cf15fdb Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1735 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Add the format attribute to functions in stdio.h.Gabe Black
gcc recognizes the format function attribute which tells the compiler to expect the format string to look a certain way and for its arguments to be of appropriate types. This helps to prevent errors like the one that was recently fixed in libpayload's assert. Change-Id: I284ae8bff32f72cfd2d1a250d126c729b38a5730 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1731 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Fix the format string of the assert macro.Gabe Black
The assert macro in libpayload was using a format string which printed the line number with %s. The line number came from the __LINE__ predefined macro which resolves to an integer constant. Change-Id: I0e00d42a1569802137cf440af3061d7f397fdd27 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1730 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Add faster, architecture specific versions of memset and memcpy.Gabe Black
Change-Id: I0f3a82de860fd3afa10a557b37fb90fe6b06ae90 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1726 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Make the symbols in memory.c weak so they can be overridden.Gabe Black
The implementations for various stdlib functions in libc/memory.c are very generic and should work under just about any circumstances. They are unfortunately also very slow. This change makes them weak symbols so that faster versions can be defined on a per architecture basis which will automatically take the place of the slow versions. Change-Id: Ia1ac90d9dcd45962b2a15f61ecc74b0a4676048d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1725 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Update the way serial info is read from the coreboot tables.Gabe Black
This information is now stored in a structure instead of in a few seperate fields. libpayload hadn't been updated to reflect the new layout or to consume the new information intelligently. Change-Id: Ice3486ffcdcdbe1f16f9c84515120c591d8dc882 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1724 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Move the definition of ipchksum into its own header file.Gabe Black
Change-Id: Ifb7c18f9ca566bd50ca138ffd8af951375089537 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1722 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Discard .note sections when linking.Gabe Black
These end up being loaded at 0 otherwise and overwrite some coreboot tables. Built and booted on Stumpy. Saw that the coreboot tables were no longer overwritten. Change-Id: Ia9f521d976d0ad544a8205323ae0ddfa8d253d29 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1721 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07Include stdint.h in libpayload's rdtsc.h.Gabe Black
This file uses uint*_t types but hadn't included stdint.h itself. Change-Id: Ib883f62951bae1ece5134c6bd0f4799a80740e8e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1720 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-10-27libpayload: New AHCI, ATA and ATAPI driversNico Huber
This adds a new interface for storage devices. A driver for ATA and ATAPI drives on AHCI host controllers comes along. The interface is very simple and was designed to match FILO's needs. It consists of three functions: void storage_initialize(void); Initializes controllers. Should be called once at startup. storage_poll_t storage_probe(size_t dev_num); with typedef enum { POLL_NO_DEVICE = -2, POLL_ERROR = -1, POLL_NO_MEDIUM = 0, POLL_MEDIUM_PRESENT = 1, } storage_poll_t; Looks for a drive with number dev_num (drives are counted from zero) and polls for a medium in the drive if appropriate. int storage_read_blocks512(size_t dev_num, u64 start, size_t count, unsigned char *buf); Reads count blocks of 512 bytes from block start of drive dev_num into buf. Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-14libpayload: CMOS access was implemented in a backward wayPatrick Georgi
Instead of having the highlevel functions make use of the lowlevel functions, it implemented the lowlevel stuff in terms of highlevel. Change-Id: I530bfe3cbc6f57a6294d86fbf1739e06467a2318 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1539 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-03libpayload: Set 8bits per char for serial portAnton Kochkov
Previously we assume that hardware using 8 bits per char by default, but on Asrock A53 Pro this is not true (7 bit per char by default). Forcing use 8n1 now. Change-Id: Ib701725d2ec6dacd7862016b2045270956b27029 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1541 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-03libpayload: UHCI driver contained too much magicPatrick Georgi
The handling of finalize in uhci_bulk was confusing, and so its behaviour changed. If set, the driver is supposed to add a trailing empty packet iff the last packet is of maximum packet size. This helps the device to decide if the transfer is completed simply by waiting for a packet that isn't full length. Change-Id: I162e8c1e034924d0de6fdcb971c94cf3a5ea31eb Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1555 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-01libpayload: fix for UHCI bulk transactionsAnton Kochkov
Fixed masking to run QH shedule. Fixed final zero filled TD generation for UHCI bulk transaction. Change-Id: I9c6ea34d132368922f2eeeaa7aadbbb6aac3e2b8 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1553 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-09-28libpayload: fix fetching integers from CMOS as stringPatrick Georgi
%ull -> %llu Change-Id: I330f681d713be7eb444870f81330cf6e9869a4fa Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1542 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-09-28libpayload: Don't leave temporary files behindPatrick Georgi
For some reason the rm -f didn't quite work on my system, but sending gcc output to /dev/null does. Change-Id: I7ece9aa9abe564bbc646ae53df1d3cd0c5aa84a2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1543 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-26libpayload: Extend CMOS access libraryPatrick Georgi
libpayload already contained a number of functions for convenient access to CMOS configuration. Add functions to support iteration over available enum fields. Change-Id: If95f45d7223d2e19c42f1d8680c12d23f6890a01 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1538 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-09-21Fix disconnect handling on UHCI root portsAnton Kochkov
Change-Id: I03b72cd1c6ed0df09c08f2a687d4f17fa3cf6afc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1531 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-21UHCI: use proper pointer sizeAnton Kochkov
We used sizeof(listp*) at a place where sizeof(listp) is more appropriate: While these are pointers, they're part of the UHCI design, and don't depend on ISA details. Change-Id: I4d3cb571c9a407103bc81fc171a8e73b68f7c7a1 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1530 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-23libpayload: add controller type in usbdev_hcAnton Kochkov
Add controller type (UHCI, OHCI, EHCI or XHCI) into usbdev_hc (hci_t) struct, so now we know which type selected controller have. It needed to access controller specific data, if access usb tree outside of libpayload (e.g. in payload intself) Change-Id: I7df947bbb56a50d0d792ccd4d3a6b021ee95e2ea Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1145 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-27libpayload: Fix typoPatrick Georgi
Change-Id: I8708703e497053aa1251f06402bd8ea59bd9d24e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1370 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-12libpayload: Add reset function for OHCI USB driverAnton Kochkov
Implemented OHCI reset function ohci_reset() in ohci.c for libpayload's USB driver. Change-Id: Id6518cbe00a21202757b34926bad171909740e97 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1177 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-06-29libpayload: OHCI driver correct PCI BAR readingAnton Kochkov
Correct registers base (PCI BAR) reading to be more specification friendly. Registers base only in [31-12] bits, all other proposed to be 0 but that not true for some motherboards. So adding mask to use only valid bits. Change-Id: I2e9a4997e016dab812ccfe654e966bc91d42a625 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1143 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-29libpayload: use correct types in UHCI driverAnton Kochkov
As we using 16-bit reading and writing in UHCI drive, so all variables related to that must be 16-bit too. Change-Id: Ib1abb03d054c167512e21f24f3c3da688c7fd01f Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1144 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-22libpayload: Adjust timeouts and delays in OHCI driverNico Huber
This sets the timeout for control and bulk transfers to 2s per transfer descriptor (like we set it in the EHCI driver). It also adds delays around the disabling of control and bulk list access to overcome some race conditions. Change-Id: Ia2d1db890fca51c7d9477de163d55030e0c5a04a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1127 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-22libpayload: Add check for failure in usb_attach_device()Nico Huber
This adds a simple check if a device is really configured before returning it's address to the usb hub driver who wants to attach it. Change-Id: I6fea140217c3e7468cc48ef7c3cbf2be8d11f47a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1131 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-22libpayload: Shutdown reasonably if we can't init usb msc deviceNico Huber
This lets the init of usb mass storage return if the device configuration is unusable. Also add some checks for proper shutdown so we don't free/remove an uninitialized device. Change-Id: I6daf9b38e632b6e381bcd5a7717f0f1a3150b64a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: Add support for interrupt transfers in OHCINico Huber
This adds support for usb interrupt transfers to the OHCI driver. Basically this enables support for HID keyboard devices. For each interrupt transfer endpoint, two queues of transfer descriptors (TDs) are maintained: the first with initialized TDs is linked to the periodic schedule of the host controller (HC), the second holds processed TDs which will be polled by the usb class driver. The HC moves processed TDs from its schedule to a done queue. We periodically fetch all TDs from the done queue, to put them on the queue associated with the endpoint, where they can be polled from. Fully processed TDs (i.e. which have gone throuch all of this) will be reinitialized and put on the first queue again. Change-Id: Iaab72c04087b36c9f0f6e539e31b47060c190015 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1128 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Fix initialization of OHCI driverNico Huber
This fixes some memory corruption, leaking and padding issues within the initialization of the OHCI driver. Change-Id: If6891f2a53e339d32c4324f4c9e0b1ed07596a60 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1126 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Implement correct done queue processing for OHCINico Huber
This adds correct processing of the done queue of the OHCI host controller (HC). We will always process the done queue after a control or bulk transfer. Unfortunately, it's hard to tell when the HC will write out the done queue, so we have do free the transfer descriptors later and have to allocate them one by one. To distinguish different types of TDs (e.g. async vs. interrupt transfers) on the done queue, they are flagged in the lsb of there .config field. We can utilize this bit for our own purpose, as it's reserved and the host controller won't interpret it and preserves its state. Change-Id: I3b2271ae6221cdd50fc0f94582afdfe52bf7e797 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1125 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Correct interchanged parameters in OHCI driverNico Huber
In ohci_private.h some invocations of a MASK macro were called with its parameters interchanged. This fixes it with the hope not to break anything nasty. Change-Id: I56cb483b208442b497dbd32ce993cc53d1fba1e5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: Detach unresponsive usb mass storage devicesNico Huber
This enables logical detachment of unresponsive usb devices (i.e. devices not responding to control transfers) in the usb mass storage driver. Without the detection of unresponsive devices we wait way too long for the device to become ready. Change-Id: I8b8cf327f49dde25afaca4d3066f16ea86b99d3d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1121 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: Add dummy queue heads to EHCI interrupt frame listNico Huber
This introduces a dummy queue head in the interrupt frame list of the EHCI host controller. It's a workaround for broken controllers which follow pointers from this list even if the terminate bit is set. Fortunately, they do honor the bit in queue heads and having an empty QH in the list doesn't violate the standard. The linux kernel has a similar workaround for AMD SB700, SB800, and Hudson-2/3 platforms. We observed this bug with an AMD SB600. Change-Id: Ibbb66dea5fddc89c7995a24d746bedf6bfa887be Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1124 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Add interrupt-queue underrun recovery to EHCINico Huber
If the queue of an interrupt transfer runs out, we have to reset the queue head. This also introduces the use of a spare transfer descriptor (TD) in interrupt queues, which assures, that a processed TD won't be reused until the host controller has written it back from his overlay. Change-Id: Id0eeb2808b77f1c187f164eb34bd66f8f399938b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1123 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Adjust timeout in EHCI driverNico Huber
Tested with a bunch of usb flash sticks. The slowest non-TUR (test unit ready) turn around took about 1.3s, so this commit increases the timeout to 2s. Change-Id: Iec64b5cc48d51912b2bdeeebb5885399a71311b2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1120 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: reg_base reading for USB EHCI driverAnton Kochkov
Added reading registers base address for USB EHCI driver in ehci_init() function. Change-Id: I59443ca9823588d70822b4f14486caf217a5ac26 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1106 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-20libpayload: Better error detection in USB mass storageNico Huber
This implements status transport (CSW) more closely to the standard (usbmassbulk_10). Change-Id: Ife516316e054d4e87ebe698dc487eeb9ebcfd38d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1072 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-06-20libpayload: Fix detach_contoller in the USB driverAnton Kochkov
Fixed usb controllers linked list walking in detach_controller() function Change-Id: Ia97c7ec814f75d2b1bfe185f160fb4cd32aa6fdb Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1105 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-06-09libpayload: Add timeouts in the UHCI USB driverNico Huber
We should always have some timeout when we wait for the hardware. This adds missing timeouts to the UHCI driver. Change-Id: Ic37b95ce12ff3ff5efe3e7ca346090946f6ee7de Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1073 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-09libpayload: Fix an integer overflow in USB mass storageNico Huber
Change-Id: I3d618497016478ea727c520e866d27dbc3ebf9af Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1070 Reviewed-by: Mathias Krause <minipli@googlemail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-08libpayload: Add timeouts in the EHCI USB driverNico Huber
We should always have some timeout when we wait for the hardware. This adds missing timeouts to the EHCI driver. Change-Id: I13ba532a6daf47510b16b8fdbe572a21f1d8b09c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1077 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Add timeouts in the OHCI USB driverNico Huber
We should always have some timeout when we wait for the hardware. This adds missing timeouts and a more standard compliant port reset to the OHCI driver. Change-Id: I2cfcb1039fd12f291e88dcb8b74d41cb5bb2315e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1076 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Remove orphaned delay from OHCI USB driverNico Huber
This removes a synthetic delay of 5ms from every OHCI USB command. A delay here seems to be of no use and first tests have shown no glitches. Change-Id: Ie72b2d49e6734345708f04f3f7b86bacc7926108 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1075 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Add support for interrupt transfers in EHCINico Huber
This adds support for usb interrupt transfers in the EHCI driver. Split transactions are supported, so this enables support for HID keyboards devices over hubs in high-speed mode. Change-Id: I9eb08f12b12c67ece10814952cb8651278b02f9d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1083 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Free intr queue structure in usb_hid_destroyNico Huber
The call to destroy_intr_queue was missing in usb_hid_destroy. Change-Id: I51ccc6a79bc005819317263be24a56c51acd5f55 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1082 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Add support for split transactions in EHCINico Huber
With split transactions, the EHCI host controller can handle full- and low-speed devices on hubs in high-speed mode. This adds support for split transactions for control and bulk transfers. Change-Id: I30fa1ce25757f33b1e6ed34207949c9255f05d49 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1081 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Bring USB hub driver to a working stateNico Huber
This adds proper device attachment and detachment detection and port enable- ment to the USB hub driver. Support for split transactions is still missing, so this works only with USB2.0 devices on hubs in USB2.0 mode and USB1.1 devices on hubs in USB1.1 mode. Change-Id: I80bf03f3117116a60382b87a4f84366370649915 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1080 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-01libpayload: Remove orphaned delay from USB mass storageNico Huber
This removes a synthetic delay of 10ms from every mass storage command. A delay here seems to be of no use and first tests have only shown a huge speed increase. Change-Id: Ida7423229373ec521d4326c5467a3f518b76149c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1071 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: Disable some buggy debugging codeNico Huber
This disables some debugging code in the OHCI USB driver which causes reboots under rare circumstances. Change-Id: Ic274c162846137ee00638ffbc59ccf1d8130586f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1074 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: fix OHCI IN commandsMathias Krause
Due to operator precedence incomming USB commands were missing some flags. Change-Id: I87ef51590c9db7a6cbc7304e1ccac29895f8a51e Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/1084 Reviewed-by: Mathias Krause <minipli@googlemail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: fix UHCI timeoutMathias Krause
UHCI commands should have a timeout of 30ms, not 30s! Change-Id: Iebcf338317164eb1e683e1de850ffab5022ca3a1 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/1085 Reviewed-by: Mathias Krause <minipli@googlemail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: Correct port power settings for EHCI root hubNico Huber
Enable power on EHCI root hub ports only if the controller supports it. Wait 20ms for the power to become stable. Change-Id: I8897756ed2bfcb88408fe5e9f9e3f8af5dd900ac Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1078 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: Add clear_feature() function to USB frameworkNico Huber
This function will be used by the USB hub driver. Change-Id: I4d1d2e94f4442cbb636ae989e8ffd543181c4357 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1079 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-31libpayload: Fix b0b4a52b70f0d7c09241f0f718a179fc55d85179Nico Huber
The removal of bitfields came with some glitches in the UHCI driver. This fixes it. Change-Id: Iba8ea3b56b03c526eca7b6388c019568e00be6f5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1069 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-04libpayload: avoid excessive casts in printf.cMathias Krause
struct printf_spec is a purely internal structure. Avoid excessive casts when using the write function pointer just to make the compiler happy by using the right types in the first place. Change-Id: Ia4f3c79a5283cb76c8aa5f9d1eee758676303382 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/850 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-04libpayload: minor cleanupsMathias Krause
Apply some const correctness to const/non-const strings in libc and libpci (what an ugly cast that was). Remove duplicated NULL test in printf_putstr(), already done in print_string() - reduces size of libpayload by a few bytes. Change-Id: I13f479df13e39d79cab291e9d99d153e1ef43eae Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/849 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-31Make libpayload parse the coreboot tables before setting up the consolesGabe Black
At least one of the console drivers, coreboot fb, uses information in the sysinfo structure to set itself up. If that structure hasn't been populated, the driver decides that there is no framebuffer and disables itself. Reversing the order these are set up fixes that problem. Change-Id: Idd8b5518980dfdd82fd4359dd0133ab7736fc428 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/816 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-21Fix libpayload alloc() size and gcc pointer optimization problems.Marc Jones
The previous commit was incomplete and missed setting the entire alloc area. There are also additional problems with gcc optimizations of the pointer math. The "auto" casting by gcc wouldn't return warnings, but it was causing the optimization to be incorrect. We are now very explicit in the casting in the pointer math. Change-Id: I020808c8d1dda544fe862b9efb0e5345eeab5aab Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/804 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-10Make libpayload alloc() memory pointers volatileMarc Jones
gcc4.6.2 was optimizing the libpayload alloc() function and failing to reload a pointer after the memory had been manipulated by a pointer in the inlined function setup(). Change the pointer type to volatile and now pass it to the setup() function. Also clean up the declaration so that it isn't cast a bunch times in the function. Change-Id: I1637bd7bd5d9cf82ac88925cbfe76d319aa3cd82 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/705 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-29tint requires more heap space for PDCurses.Marc Jones
tint was failing with the message "initscr(): Unable to create curscr." tint uses the initscr() to enable vga windows, which allocates more heap space with PDCurses than with tinycurses. Expanding the heap from 16KB to 64KB resolves the issue. Change-Id: I1d38651e2b77f55613969c29614fb3b2be38a00c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/687 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-20libpayload: fix compile error with enabled USB_DEBUGMathias Krause
Commit c4348d0 ("libpayload: Remove bitfield use from OHCI data structures") missed to adapt a debug message. This patch fixes this. Change-Id: I5f6a4be9c7f6f99cb103926772717e15a3cbca70 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/653 Tested-by: build bot (Jenkins) Reviewed-by: Bernhard Urban <lewurm@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-17libpayload: enforce const correctness for CMOS getter/setterMathias Krause
Input only arguments to {get,set}_option*() should be const to catch programming errors early. Change-Id: I560001a8e9226dfd156a4e529fcad20549236ebd Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/652 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17libpayload: fix compiler warning for first_cmos_entry()Mathias Krause
The 'name' argument to lookup_cmos_entry() is declared to be 'char *' but we pass an empty string ("") which is 'const char[]' so the compiler legitimatly warns about discarded qualifiers here. Fix this by passing NULL as 'name'. Minor nitpick: The NULL test in lookup_cmos_entry() is superfluous as our implementation of strnlen() can handle NULL pointers gracefully. But for an average C hacker it just doesn't feel right not to do so. Change-Id: I592917d12d8fa840804c0d19e38b844427064fef Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/651 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-13libpayload: code cosmeticsMathias Krause
Be consistend with coding style at least within a function -- don't mix sizeof with plain values. Change-Id: Iefb5b7fe4f54977f5505fc9cea65c9c4af3e7f3a Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/617 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-10libpayload: fix possible mem leak in get_option_as_string()Mathias Krause
Change-Id: I7c3adbd1b72be81585bbaabb42532fc4cad57f58 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/616 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-07libpayload: Remove workaround for bitfield management in EHCI driverPatrick Georgi
We don't use bitfields anymore. Change-Id: I25ceec2024f659612871bcfe5f98df3a10789055 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/595 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07libpayload: Force checking all EHCI ports on power-onPatrick Georgi
EHCI port status reporting isn't very consistent on power-on, so just looking for devices on all ports is the safest way to find everything. Change-Id: I26b4305016f0bed1d2c1b5cffc59d5813fa1cbbb Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/594 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07libpayload: Fix EHCI driverPatrick Georgi
When converting EHCI to not use bitfields, two offsets were converted incorrectly. Change-Id: I0bb4bad0eee42e54ad4fd53d6c35b107e227c41a Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/593 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-03libpayload: Add iterators for CMOS variablesPatrick Georgi
Provide functions that pick the first CMOS variable defined in the cmos layout, and from there, the next one. Change-Id: Ie98146de7f6273089fc6fc0b232a4b94337cf8a3 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/587 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-03libpayload: Expose options_checksum_validPatrick Georgi
options_checksum_valid can be used as a fast test to identify invalid CMOS data by checking the checksum. Change-Id: I44635d4c5d389579ad82435907ba8658e1bd44bb Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/586 Reviewed-by: Bernhard Urban <lewurm@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-03libpayload: Provide interpretation of CMOS data structuresPatrick Georgi
Add new functions that allow using string based key/value access to CMOS, including support for enums. Change-Id: Ibe238eff4c5230e5f61004c88221cd34393873aa Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/585 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02libpayload: Add access to CMOS images in memory spacePatrick Georgi
Provide access to CMOS images in RAM or CBFS, such as cmos.defaults Change-Id: Ifa70dea6206d94c0c271caf9ae1152fc76b5d51a Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/584 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02libpayload: Refactor highlevel CMOS accessPatrick Georgi
This will allow using libpayload functions to access CMOS data in template files in RAM or CBFS. Change-Id: I323ed625e657cbdc1fae8c279a82ee578e83ad00 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/583 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-26libpayload: Allow using CBFS functions on images in RAMPatrick Georgi
Two new functions allow switching the CBFS functions from using RAM or ROM, with ROM as default. Change-Id: I04d67ad622d25c5728ae9a63f5b8a3dc9bbacce6 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/550 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-18libpayload: style: compare null-pointers with NULL, not 0Patrick Georgi
Change-Id: I5efbfb75e2894bc8d8e50c8737cfee9738d15eda Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/551 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-10libpayload: Remove bitfield use from EHCI data structuresPatrick Georgi
We agreed that bitfields are a Bad Idea[tm]. Change-Id: If4c4cb748af340e2721b89fea8e035da0632971f Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/480 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-10libpayload: Remove bitfield use from UHCI data structuresPatrick Georgi
We agreed that bitfields are a Bad Idea[tm]. Change-Id: I1b2bcda28c52ad10bbe9429e04d126b555f7828a Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/478 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-10libpayload: Remove bitfield use from OHCI data structuresPatrick Georgi
We agreed that bitfields are a Bad Idea[tm]. Change-Id: Ic04f151091c359912835b8b3db488d2d41bd4bbb Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/479 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-07Cleanup access to vendor/part # infoPhilip Prindeville
Instead of macros to access MAINBOARD record, use convenience functions. Store pointers to MAINBOARD and HEADER for use outside of CB code. Change-Id: I074e3a0df7d25726cbd942538bfdc5a63dd17e12 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/502 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24libpayload: remove uhci_reg_maskXPatrick Georgi
Not that good an idea to start with. Coccinelle patch: @@ @@ -void ( -uhci_reg_mask8 | -uhci_reg_mask16 | -uhci_reg_mask32 ) - (...) { ... } @@ @@ -void ( -uhci_reg_mask8 | -uhci_reg_mask16 | -uhci_reg_mask32 ) - (...); @@ expression ctrl, reg, ormask; @@ -uhci_reg_mask32 (ctrl, reg, ~0, ormask) +uhci_reg_write32 (ctrl, reg, uhci_reg_read32 (ctrl, reg) | ormask) @@ expression ctrl, reg, ormask; @@ -uhci_reg_mask16 (ctrl, reg, ~0, ormask) +uhci_reg_write16 (ctrl, reg, uhci_reg_read16 (ctrl, reg) | ormask) @@ expression ctrl, reg, ormask; @@ -uhci_reg_mask8 (ctrl, reg, ~0, ormask) +uhci_reg_write8 (ctrl, reg, uhci_reg_read8 (ctrl, reg) | ormask) @@ expression ctrl, reg, andmask; @@ -uhci_reg_mask32 (ctrl, reg, andmask, 0) +uhci_reg_write32 (ctrl, reg, uhci_reg_read32 (ctrl, reg) & andmask) @@ expression ctrl, reg, andmask; @@ -uhci_reg_mask16 (ctrl, reg, andmask, 0) +uhci_reg_write16 (ctrl, reg, uhci_reg_read16 (ctrl, reg) & andmask) @@ expression ctrl, reg, andmask; @@ -uhci_reg_mask16 (ctrl, reg, andmask, 0) +uhci_reg_write16 (ctrl, reg, uhci_reg_read16 (ctrl, reg) & andmask) Change-Id: Id0eb8327293831e54249d43fd06d50963c793699 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/477 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-08 06:13:09 +0000