summaryrefslogtreecommitdiff
path: root/payloads/libpayload
AgeCommit message (Collapse)Author
2015-08-14libpayload: xhci: Carry over fixes from Chromium treeJulius Werner
This patch re-adds a few fixes that originally went into the chromeos-2013.04 tree. I kinda seem to have slipped them into the backport of Nico's original XHCI patch (crosreview.com/168097) instead of making a new change, which was not very clever and caused them to be forgotten in the later upstreaming wave. Changing internal XHCI error numbers is just a cosmetic change to make them uniquely identifyable in debug output. Bumping the timeout to 3 seconds is an actually important fix since we have seen mass storage devices needing that much in the past. BRANCH=None BUG=None TEST=Diffed payloads/libpayload/drivers/usb between chromeos-2013.04 and chromeos-2015.07, confirmed that no serious differences remain. Original-Change-Id: I03d865dbe536072d23374a49a0136e9f28568f8e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290423 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I5d773d3a23683fb2164916cc046f4a711b8d259e Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/11178 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14cbfs: fix printf for 64bit architecturesDaisuke Nojiri
BUG=none BRANCH=smaug TEST=Built for Smaug Original-Change-Id: I7ff577f97252265ca6c96963ca44a6fbd0de9f7a Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290049 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-(cherry picked from commit 9cff308653766ea81978214e99a3d740aff4dbbe) Original-Reviewed-on: https://chromium-review.googlesource.com/290116 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Change-Id: I5dcc17e0a42b46350fe6c398767f8155bdd0fd9d Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/11177 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13libpayload: usb: don't prematurely free the usb deviceAaron Durbin
Before the controller's destroy_device() could interrogate the usbdev_t object usb_detach_device() was freeing and NULLing out the pointer. That results in all callers who needed that object to start accessing random bits of memory. This eventually led into free()ing memory it shouldn't which corrupted the allocator's state. Eventually, all forward progress was lost by way of a single ended linked list turning into a circular list. The culprit seems to be a bad merge in commit e00ba21. BUG=chrome-os-partner:43419 BRANCH=None TEST=Can boot into OS now w/o "hanging" on glados. Original-Change-Id: I86dcaa1dbaf112ac6782e90dad40f0932f273a1f Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290048 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Change-Id: I9135eb0f798bf7dbeccc7a033c3f8471720a0de5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11173 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-10libpayload: Kconfig include in lpgccPaul Kocialkowski
Payloads will include headers from libpayload, which depend on kconfig.h, so it has to be included in the command line produced by lpgcc. Change-Id: I3b55928babba2896a112f8c5fae46365cf71d308 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11114 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-10libpayload: Fix compile error in time.c if nvram support is disabledPatrick Georgi
rdtsc() is only used for nvram access. Change-Id: I896116d6a5782e5e50aa3acfbe1831b080f55d34 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11137 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-09libpayload: Use CONFIG_LP_CCACHE instead of CONFIG_CCACHEStefan Reinauer
CONFIG_CCACHE was obsoleted a long time ago for libpayload. Change-Id: Ib0a418d97f368439476e524b753160a6229bb9f6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10710 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09license headers: Drop FSF addresses againPatrick Georgi
Some FSF addresses found their way back into our tree. Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11145 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-09libpayload: lpgcc: CFLAGS and CMDLINE order inversionPaul Kocialkowski
When building an external payload with lpgcc, the provided cmdline needs to be included before libpayload-specific CFLAGS so that the include priority is the payload first. This way, a payload using e.g. Kconfig that declares a config.h will have its config.h included first, instead of libpayload's config.h. Change-Id: I19b8012623e04c92a427d74904aed7f3bf5f0996 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11113 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-04libpayload: .xcompile target is an actual filePaul Kocialkowski
Marking .xcompile as PHONY implies triggering the xcompile script each time make is invoked. This is particularly problematic, especially when the script cannot find the crossgcc toolchains on its own and has to be fed XGCCPATH. Change-Id: Icb5ae82b210bca1ee9cf56d76130eefde481f81e Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11118 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-04libpayload: Veyron configs unificationPaul Kocialkowski
All the currently-provided configs for veyron boards are the same, so we might as well have a common one that can be used on all boards. Change-Id: I2e24f2d7a5206878381467b97f01d3e752a93289 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-03libpayload: Allow for KBUILD_DEFCONFIG overridePaul Kocialkowski
In order to specify a defconfig to libpayload, one might want to declare KBUILD_DEFCONFIG in the make command line and run the defconfig target. Change-Id: I2ade6f4ff2f0b6478a0831158028ebc79b5daa81 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11112 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21libpayload: lz4: Add output overrun check to incompressible caseJulius Werner
The LZ4 decompressor currently doesn't check for output overruns before writing data in the case where a block had been incompressible (and included verbatim in the compression stream). This is extremely unlikely with the default 4MB blocks, but still a nice thing to fix. We'll still output as much data as we can before returning an error to support partial decompression use cases. This matches the behavior already in place for normal, LZ4-compressed blocks where the decompression function is already (supposed to be) doing complete bounds checking (although it is not guaranteed to output all valid bytes before aborting on an output overrun, and you should try to provide a few dozen bytes of extra buffer space beyond the parts you're interested in on partial decompression). BRANCH=None BUG=chrome-os-partner:32184 TEST=None Change-Id: I5e40c8cec8947ec0ec8f6d8c8fa2574cfb4dc958 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 636985334c9b3b93a12d4066d2829f1f999c9315 Original-Change-Id: Iecf44650aade60b9fa1b13e57da752fb482a3f3f Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286240 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11016 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-18libpayload: usb: Add support for SuperSpeed hubsJulius Werner
This patch adds support for the SuperSpeed half of USB 3.0 hubs, which previously prevented SuperSpeed devices behind those hubs from working. BRANCH=None BUG=chrome-os-partner:39877 TEST=Played around with multiple hubs and devices on Oak and Falco, can no longer find a combination that doesn't work. Change-Id: I20815be95769e33d399b7ad91c3020687234e059 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3db96ece20d2304e7f6f6aa333cf114037c48a3e Original-Change-Id: I2dd6c9c3607a24a7d78c308911e3d254d5f8d91d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/284577 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: chunfeng yun <chunfeng.yun@mediatek.com> Reviewed-on: http://review.coreboot.org/10958 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-18libpayload: usb: xhci: Prevent address reuseJulius Werner
We have been trying to avoid reassigning previously used USB addresses to different devices since CL:197420, because some devices seem to take issue with that. Unfortunately, that patch doesn't affect XHCI: those controllers insist on chosing addresses on their own. The only way to prevent them from reusing a previously assigned address is to not disable that slot at all. This patch implements address reuse avoidance on XHCI by not disabling slots when a device is detatched (which may occur both on physical detachment or if we simply couldn't find a driver for that device). Instead, we just release as many resources as we can for detached devices (by dropping all endpoint contexts) and defer the final cleanup until the point where the controller actually runs out of resources (a point that we probably don't often reach in most firmware scenarios). BRANCH=none BUG=chrome-os-partner:42181 TEST=Booted an Oak plugged into a Servo without having a driver for the SMSC network chip, observed that it could still enumerate the next device afterwards. Kept unplugging/replugging stuff until the cleanup triggered and made sure the controller still worked after that. Also played around a bit on a Falco without issues. Change-Id: Idfbab39abbc5bc5eff822bedf9c8d5bd4cad8cd2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 88c6bcbc41156729c3c38937c8a4adebc66f1ccb Original-Change-Id: I0653a4f6a02c02498210a70ffdda9d986592813b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/284175 Original-Tested-by: Nicolas Boichat <drinkcat@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10957 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16libpayload: usb: dwc2: support split transactionYunzhi Li
With split transaction, dwc2 host controller can handle full- and low-speed devices on hub in high-speed mode. This commit adds support for split control and interrupt transfers BUG=None TEST=Connect usb keyboard through hub, usb keyboard can work BRANCH=None Change-Id: If7a00db21c8ad4c635f39581382b877603075d1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4fb514b7f7f7e414fa94bfce05420957b1c57019 Original-Change-Id: I07e64064c6182d33905ae4efb13712645de7cf93 Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283282 Original-Tested-by: Lin Huang <hl@rock-chips.com> Original-Commit-Queue: Lin Huang <hl@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10956 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-15libpayload: assume cbfs file alignment is 64 bytePatrick Georgi
Change-Id: I8dfd8fbd452ce92fbca2cf095bc5e43e4a26969d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10920 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-14libpayload: store boot media information in sysinfoPatrick Georgi
Write boot media information in sysinfo, if it exists. This allows picking the right CBFS for further files in case there are several. Change-Id: I75a8ee6b93f349b9f2fab1e82826aba675949c0a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10869 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-14libpayload: Add support for handling fmapsPatrick Georgi
They will become more common soon, so better support them now. Change-Id: I2b16e1bb7707fe8410365877524ff359aeefc161 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-13libpayload: Fix arithmetic precedence in div_round_up()Julius Werner
Well, this is just embarrassing... BRANCH=None BUG=None TEST=None Change-Id: I7c443d2100b6861d736320ac14c1bd9965937a66 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 455e3784882ea1b76bcf8e17724869e37d9c629d Original-Change-Id: Ia33e98aeaa8e78e3e3d2c7547e673a623ea86ce2 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/284596 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/10879 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-07-09libpayload: Have make install save .xcompile fileStefan Reinauer
Useful information, record it in the destination directory, together with .config. Change-Id: Icf3282f61f502b37f9f06d7d5a0a630f49c96ed2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10864 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-09libpayload: Use top level xcompileStefan Reinauer
Instead of having a second copy that already within 2-3 days becamer quite outdated, use the same xcompile copy for coreboot and libpayload, as we do with Kconfig already. This requires a simple change to the top level xcompile to understand both CONFIG_COMPILER_GCC and CONFIG_LP_COMPILER_GCC (only one of them will occur at the same time) libpayload's .xcompile target was moved later so that it can make use of $(top) Change-Id: I44001067f551cd0776dd303cbaeaa40eb3d5c1db Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10863 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-09libpayload: Add LZ4 decompression algorithmJulius Werner
This patch adds support for the LZ4 decompression algorithm to libpayload. It's what all the cool kids are using for decompression these days and has many interesting advantages over LZMA (and everything else I know of): blazing fast decompression (20(!) times faster than LZMA, twice as fast as LZO on my Cortex-A72), no memory requirements on decompression, and possibly in-place decompression support. It pays for that with a lower compression ratio (about 50% larger compressed size than LZMA, 10% larger than LZO for an ARM64 Linux kernel binary), but the boot time math still works in its favor for our IO speeds. This patch only adds the raw decompression functions for use by external payloads, we can later try integrating them in CBFS. It copies the decompression code itself unmodified from the upstream LZ4 library at github.com/Cyan4973/lz4 which will hopefully make it easy to update. The frame format parsing is reimplemented since the upstream version looks unnecessarily complex and unreadable for our needs. BRANCH=smaug BUG=chrome-os-partner:32184 TEST=With other patches, booted ARM64 kernel that got compressed from 15M to 5.1M and decompresses in 44ms. Change-Id: I65bdc4b2b19bd51c7b7e17a4e4b79da301a2a014 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f8a1fc996d5b0234d07f567fa8163d0f802d5144 Original-Change-Id: I15c0620da05561ade2552b15ffdf6bb3afd7eb26 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282743 Original-Reviewed-by: Stefan Reinauer <reinauer@google.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10845 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-08libpayload: update defconfigsPatrick Georgi
That way they don't need an initial 'make oldconfig' pass to be useful again. Change-Id: I3724fffab24b69478b8077f34e9d787555fd157b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10805 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: don't overwrite CFLAGSPatrick Georgi
Makefile already sets it to contain the architecture specific flags, don't drop them, but add to that instead. Change-Id: I147e6480ab2b3c1ee4f4ace511197b4ba94280b8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10804 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: architecture mapping is now done in xcompilePatrick Georgi
This helps the build system find i386 and mips compilers. Change-Id: I17d18019b556190f860d288e66f368f8d29ca24d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10803 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: drop LIBGCC_FILE_NAME variablePatrick Georgi
It's unused. If we need something like that, .xcompile provides it, and in a cross-platform and clang-aware way. Change-Id: Ic1bdc2e3e252d612a5b99ad4e8caebc5158a485f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10802 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: defer including .xcompilePatrick Georgi
It needs to come after DOTCONFIG so that the compiler decision can be made. Change-Id: I5c6730ac58ab8731f07bb7c5161b2d0a59588e28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10801 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: Add compiler switchPatrick Georgi
clang is totally untested, but it mirrors coreboot now. Change-Id: I0e13ff8bba2007159a4a795ca07d187504b606b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10800 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: mark util/xcompile/xcompile executablePatrick Georgi
Change-Id: I97088df1550f580d4648c7cccbd81c696fcfe2dc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10799 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06cbfs: define libpayload_init_default_cbfs_media weaklyDaisuke Nojiri
To allow a payload to define its own libpayload_init_default_cbfs_media, default implementation needs to be defined weakly. BUG=none BRANCH=tot TEST=dumped a cbfs file from depthcharge cli on jerry Change-Id: Ice73ae5a63dfd49e79c0eeb92d4eade016d61c39 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1f308177fffb0d525fdb50f8d024568bb9025352 Original-Change-Id: I4721139aea3169c62c10a2a26582bd9277e4cb83 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/283061 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10783 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06sysinfo: remove unused tag for struct spi_flashDaisuke Nojiri
This will conflict with struct spi_flash defined in spi_flash.h BUG=none BRANCH=tot TEST=built libpayload for veyron jerry Change-Id: I7e1be28cf430021944fc96890082a0704d093e9f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f0b8a7ec114046335fb1a51b6a92e10e5a16520 Original-Change-Id: I6d4f8a8e93aeb055f7dd6e5e8fd5e6c6153ab837 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282588 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: http://review.coreboot.org/10782 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06update common base header filesDaisuke Nojiri
IS_ENABLED is defined in kconfig.h, thus, should be included in libpayload.h. BUG=none BRANCH=tot TEST=built coreboot/libpayload for veyron_jerry Change-Id: I9c5879b6125ac66a75a507ab07a6816ab54ed0ba Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 51dcd58a841009081fdefcadf9aa74286152dde6 Original-Change-Id: I30e6d87c9de827a214a6100449cd716e773c2ba3 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282587 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: http://review.coreboot.org/10781 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06lzma: Return correct amount of decompressed bytesJulius Werner
The LZMA functions are supposed to return the decompressed size, but what they actually return is just an unaltered field from the LZMA header that is *supposed* to contain the decompressed size. Apparently some encoders just overshoot that for no good reason. This patch changes the code such that the actual amount of decompressed bytes is returned. BRANCH=smaug BUG=None TEST=Printed output bytes when decompressing kernels with LZMA in depthcharge, noted that amounts now make sense. Change-Id: Icdd8f782aa87841f770eff4c14a08973530c7446 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24b2fa8c9a342ca4288dad1430c8965395f00263 Original-Change-Id: Ib4cf8673846aedd34656e594ce7b8ea875b56099 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282742 Original-Reviewed-by: Stefan Reinauer <reinauer@google.com> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10777 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: usb: dwc2: support interrupt transferYunzhi Li
dwc2 host core do not have a periodic schedule list, so try to send an interrupt packet in poll_intr_queue() function and use frame number read from usb core register to calculate time and schedule transfers. BUG=None TEST=Tested on RK3288 with two USB keyboards(connect to SoC without USB hub), both work correctly. BRANCH=None Change-Id: I16f7977c45a84b37c32b7c495ca78ad76be9f0ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3d0206b86634bcfdbe03da3e2c8adf186470e157 Original-Change-Id: Ie54699162ef799f4d3d2a0abf850dbeb62417777 Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/280750 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Lin Huang <hl@rock-chips.com> Original-Tested-by: Lin Huang <hl@rock-chips.com> Reviewed-on: http://review.coreboot.org/10774 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: arm(64): add read8/16/32 and write8/16/32Daisuke Nojiri
This applys the same change made by https://chromium-review.googlesource.com/261692 to libpayload. BUG=none BRANCH=tot TEST=built for veyron_jerry, rush_ryu, samus Change-Id: I26dd66d79cd1559a7852b3c9d252420f2fed5fa0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d0d6f70aa805e18966e80618fbf9e9605274b030 Original-Change-Id: Ib0c199238f8fa58643d51782b17550dbd0d9ebd7 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282541 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10773 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: udc: dwc2: support force_shutdown() routineYunzhi Li
Add force_shutdown() routine for dwc2 udc driver to support disconnect and reconnect case when fastboot receiving data. BUG=chrome-os-partner:41687 BRANCH=None TEST=None Change-Id: I9ec204d8b7088cfafd3164c9779a6fd85d379dba Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9238f87c065ba8a57bfb4a7e65fd1821ff2922f9 Original-Change-Id: I1e584aaf19efa14409bdfa26039c27fa7034b5f0 Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/281130 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Lin Huang <hl@rock-chips.com> Original-Commit-Queue: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-on: http://review.coreboot.org/10770 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-03libpayload: update xcompile scriptPatrick Georgi
Copy from coreboot. at some point it probably should just reuse coreboot's version. Change-Id: Iee905a9060983ff85e2e70bde69a221c64a07cbc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10756 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-01libpayload: always compile with -ffunction-sectionsStefan Reinauer
Always compile with -ffunction-sections and -fdata-sections This does not hurt, and it allows the linker to produce much smaller binaries in some circumstances. Change-Id: Ibf9f24c210d6d2ed40451b4cf0d68ce88220bc5f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10750 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01libpayload: Fix compilation on ARM with GDB enabledStefan Reinauer
Without this, gdb_enter() is not defined. Change-Id: I067dce371ee817d6ac77387fcbe42a9a7deb6438 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10755 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-07-01libpayload: Keep stack boundary small on x86Stefan Reinauer
There is no measurable performance impact, but this positively impacts the memory used by payloads. Change-Id: Ib2bdba4a7bf2a4c2391a20b3225bbb44422d3194 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10751 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30libpayload: Makefile: Use variables defined for KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ia451e8250307ad1944cb0429bdfee4bdf18c706b Reviewed-on: http://review.coreboot.org/10712 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30libpayload: Drop duplicate copy of KconfigStefan Reinauer
It's perfectly fine to have one single copy of kconfig in the tree. Change-Id: Icfe32f0249dfc1c223009d6e7136462f8f8a7248 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10521 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30libpayload: Make Kconfig bools use IS_ENABLED()Stefan Reinauer
This will make the code work with the different styles of Kconfig (emit unset bools vs don't emit unset bools) Roughly, the patch does this, and a little bit of fixing up: perl -pi -e 's,ifdef (CONFIG_LP_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]` perl -pi -e 's,ifndef (CONFIG_LP_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]` Change-Id: Ib8a839b056a1f806a8597052e1b571ea3d18a79f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10711 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30libpayload: Swap the macros of VT100_CURSOR_ON and VT100_CURSOR_OFFHouse Chou
The macros of VT100_CURSOR_ON and VT100_CURSOR_OFF are exchanged Change-Id: Ifdae186ae0503a915d695a9e3fd24bdf65d8428a Signed-off-by: House Chou <hoare.tw@gmail.com> Reviewed-on: http://review.coreboot.org/10718 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30libpayload: add UDC driver for Designware controllerhuang lin
Found in rockchips rk3288 as used in google/veyron. BUG=None TEST=None BRANCH=None Change-Id: I2f2c36c5bea3986a8a37f84c75608b838a8782ae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 59a0bcd97e8d0f5ce5ac1301910e11b01e2d24b1 Original-Change-Id: Ic89ed54c48d6f9ce125a93caf96471abc6e8cd9d Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/272108 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Lin Huang <hl@rock-chips.com> Original-Tested-by: Lin Huang <hl@rock-chips.com> Reviewed-on: http://review.coreboot.org/10689 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30UDC: Correct cleaning out memory for string descriptorsFurquan Shaikh
BUG=chrome-os-partner:41687 BRANCH=None TEST=Compiles successfully and fastboot devices reports correct serial number even after re-connection. Change-Id: I4741a5d6333523eb47c27b4a20c4ef3f1e853d76 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6249b1e35391550d788f56a7b3e7a49ae19f0c93 Original-Change-Id: I1348c33f354d11e3c29ccd9da9948cfbeb60aa9e Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/281192 Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10687 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30udc/chipidea: Allow force_shutdown of connectionFurquan Shaikh
Allow force shutdown operation of the connection in case where the cable is disconnected and reconnected back. BUG=chrome-os-partner:41687 BRANCH=None TEST=Compiles successfully and fastboot works fine even with reconnection of cable Change-Id: I8eb1217b4a9ad6ce8a2a40db329eca1930eda089 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3d7ab65c459caa4ec526b99a1aee1a31e9cb80da Original-Change-Id: I354c44e0ed2211cb2c4c1ae653d201b7d15ea932 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/281066 Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10686 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-23libpayload udc: add interface to add string descriptorsPatrick Georgi
They're ASCII only, with only one language at a time, but they should be good enough to report device names and serial numbers. BUG=none BRANCH=none TEST=with depthcharge CL, check dmesg on the host device Change-Id: If888e05b2f372f7f0f43fadb108ca7ef4ed3b7c1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f0bc4242057d3edc4f4796ebeed2d98d89d60a1d Original-Change-Id: Ibe42f1b49f412e5482cebb7ebe20f6034352fd12 Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/278300 Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10626 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2015-06-23libpayload: Parse MTC and fill mtc_start and mtc_sizeFurquan Shaikh
Parse coreboot table and fill in mtc_start and mtc_size values in sysinfo structure. BUG=chrome-os-partner:41125 BRANCH=None TEST=Compiles successfully and boots to kernel prompt Change-Id: If210ea0a105f6879686e6e930cb29e66bc5e6cd0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b70d0d35c85fa1a2317b0239276d5d9e7a550472 Original-Change-Id: I60b6f8ed4c704bd5ad6cce7fce2b9095babe181e Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/276778 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10563 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-17stddef: Add macro for member_sizeFurquan Shaikh
Add macro to calculate size of a structure member BUG=chrome-os-partner:41125 BRANCH=None TEST=Compiles successfully Change-Id: I71bcefe1c3b32ad559d7764e77369c67d09422a0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b425a310c14eabad79caf97649db6469380bd602 Original-Change-Id: I377fff062729aa664f7db469b86764b0ad941c38 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/276809 Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10560 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-12libpayload: Rename Config.in -> KconfigStefan Reinauer
libpayload is the only Kconfig based project under the coreboot umbrella that is using Config.in as its name for Kconfig config files. Rename that to Kconfig as on the other projects for consistency. Change-Id: I1c69ec13582d88409384b492484535dcc5e1ad20 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10520 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-08libpayload: retire LAR supportPatrick Georgi
Who knows it still? Change-Id: If6e36569cd9a1ba3da8b3fe84264cd2a6dfd634b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10443 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05lib: Unify log2() and related functionsJulius Werner
This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-03libpayload: usb: Support MTK xHCI host controllerYidi Lin
1. There is a mis-understanding to calculate the value of TD Size in Normal TRB. For MTK's xHCI controller it defines a number of packets that remain to be transferred for a TD after processing all Max packets in all previous TRBs, that means don't include the current TRB's. 2. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK architecture defines some extra SW scheduling parameters for HW. According to these parameters provided by SW, the xHC can easily decide whether a synchronous endpoint should be scheduled in a specific uFrame. The extra SW scheduling parameters are put into reserved DWs in Slot and Endpoint Context. But in coreboot synchronous transfer can be ignored, so only two fields are set to a default value 1 to support bulk and interrupt transfers, and others are set to zero. 3. For control transfer, it is better to read back doorbell register or add a memory barrier after ringing the doorbell to flush posted write. Otherwise the first command will be aborted on MTK's xHCI controller. 4. Before send commands to a port, the Port Power in PORTSC register should be set to 1 on MTK's xHCI so a hook function of enable_port in generic_hub_ops_t struct is provided. Change-Id: Ie8878b50c048907ebf939b3f6657535a54877fde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 738609c11f16264c6e6429d478b2040cb391fe41 Original-Change-Id: Id9156892699e2e42a166c77fbf6690049abe953b Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/265362 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: http://review.coreboot.org/10389 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-03libpayload: usb: Max packet size of SuperSpeed control EPs should be 512.Chunfeng Yun
BRANCH=none BUG=none TEST=none Change-Id: I563ef65db900d7675aeb5b9123dfb5a8980bf964 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9764115d7bcce1d6423464bd81b58211ac728409 Original-Change-Id: Ibac8d3b9e28b4a563079f288901abcfbff6913ee Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/269863 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: http://review.coreboot.org/10388 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-02libpayload: Add div_round_up() functionJulius Werner
The lack of a div_round_up() function in libpayload keeps being a problem for payloads and has already caused us to sprinkle numerous less-readable ALIGN_UP(n, d) / d throughout depthcharge. Let's add this so we can avoid adding any more and then maybe cocchinelle them all over later. BRANCH=None BUG=None TEST=None Change-Id: I241a52770a0edcf7003b48a81875b3fa0cb7ed53 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a3f9514f9cfd325cc3c4b542020574b605fac935 Original-Change-Id: Ia55bd4bc52ab8a249b4854e40727cf6917af7b30 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273050 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10392 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-02arm64: Decouple MMU functions from memrangesJulius Werner
The current arm64 MMU interface is difficult to use in pre-RAM environments. It is based on the memranges API which makes use of malloc(), and early stages usually don't have a heap. It is also built as a one-shot interface that requires all memory ranges to be laid out beforehand, which is a problem when existing areas need to change (e.g. after initializing DRAM). The long-term goal of this patch is to completely switch to a configure-as-you-go interface based on the mmu_config_range() function, similar to what ARM32 does. As a first step this feature is added side-by-side to the existing interface so that existing SoC implementations continue to work and can be slowly ported over one by one. Like the ARM32 version it does not garbage collect page tables that become unused, so repeated mapping at different granularities will exhaust the available table space (this is presumed to be a reasonable limitation for a firmware environment and keeps the code much simpler). Also do some cleanup, align comments between coreboot and libpayload for easier diffing, and change all error cases to assert()s. Right now the code just propagates error codes up the stack until it eventually reaches a function that doesn't check them anymore. MMU configuration errors (essentially just misaligned requests and running out of table space) should always be compile-time programming errors, so failing hard and fast seems like the best way to deal with them. BRANCH=None BUG=None TEST=Compile-tested rush_ryu. Booted on Oak and hacked MMU init to use mmu_config_range() insted of memranges. Confirmed that CRCs over all page tables before and after the change are equal. Change-Id: I93585b44a277c1d96d31ee9c3dd2522b5e10085b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f10fcba107aba1f3ea239471cb5a4f9239809539 Original-Change-Id: I6a2a11e3b94e6ae9e1553871f0cccd3b556b3e65 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/271991 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10304 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-18libpayload: add mediatek timer driverYidi Lin
Change-Id: Ifb19cf97d4db6c7394521e549968a0cfb6ed1c75 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0137652ca07e290bb3cb1cc82a00b44ac7bcc7bf Original-Change-Id: Ica649927d3533c847b24e520e8fe73d75fb9e786 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/257375 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10170 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-13libpayload: x86: correct types used for IOAaron Durbin
libpayload on x86 defines u32 and uint32_t as typedefs of unsigned int. However, the readl/writel routines use long. With alias checking this throws type punning errors. Align the readl/writel/inl/outl types with the 32-bit fixed width ones that are exposed. Change-Id: Ie51cff8af4596948f6132e3cb743f1bc4ea8f204 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10186 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-05-12libpayload: Fix passing BAR to EHCI driverPatrick Georgi
The EHCI driver never looked for the base address handed to it but instead used an uninitialized field for that information. Change-Id: I89fe0cc212092672b36e978083e3de78419b1eb5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/10179 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-04libpayload: Guard PCI using code appropriately in XHCI driverPatrick Georgi
Make the XHCI driver compile on ARM again. The Panther Point specific shutdown handler is certainly _not_ necessary there. Change-Id: I470afd4d82d101902b119b3ead4381e2b36a94b0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10091 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-27libpayload arm64: update mmu translation table granule size, logic and macrosJimmy Huang
1. change mmu granule size from 64KB to 4KB 2. correct level 1 translation table creation logic 3. automatically calculate granule size related macros BRANCH=none BUG=none TEST=boot to kernel on oak board Change-Id: Ic62c7863dff53f566b82b68ff1d1ad9ec5d0698d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e5de7d942e42a8202fb879ce64b871864b1b9d38 Original-Change-Id: I78d7838921fa82a670e18ddc2de6d766dc7a2146 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/266010 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: http://review.coreboot.org/10010 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-04-22arm64: Add arch_program_segment_loaded call to arm64Furquan Shaikh
arch_program_segment_loaded ensures that the program segment loaded is synced back from the cache to PoC. dcache_flush_all on arm64 does not guarantee PoC in case of MP systems. Thus, it is important to track and sync back all the required segments using arch_program_segment_loaded. BUG=chrome-os-partner:38231 BRANCH=None TEST=Compiles successfully and boots to kernel prompt on smaug Change-Id: Ic6fcc7e5e0cccbab317950f8abab0c494041d19a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 284e3784854f764159b64286cea366c66b6bce2c Original-Change-Id: I5c35b9aa2ae9b5c1f2fcdef40ffb1cde7f49cc1a Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/263327 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9904 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22libpayload: provide icache_invalidate_all() on ARM64Furquan Shaikh
In order to not duplicate the instruction cache invalidation sequence provide a common routine to perform the necessary actions. Also, use it in the appropriate places. BUG=chrome-os-partner:38231 BRANCH=None TEST=Compiles successfully for smaug and boots kernel Change-Id: I1d311dbc70bf225f35d60bb10d8d001065322b3a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8ab015156713eb7531378edbd1d779522681d529 Original-Change-Id: I8da7002c56139f8f82503484bfd457a7ec20d083 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/263326 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9903 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22libpayload: Correct shareability mmu configuration on ARM64Furquan Shaikh
BUG=chrome-os-partner:38222 BRANCH=None TEST=Compiles successfully and boots kernel Change-Id: I6e1e841d84d1a73e5c726143aeba76af933e81a1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 59861a2700407b9e6a6209fbc45543c127b50b4b Original-Change-Id: I256d07a41bec83037f2b61a9350f903119d8c101 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/263325 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9902 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22libpayload: fix a mips memmove() bugVadim Bendebury
size_t is an unsigned type and as such is a bad choice for a counting down loop counter. BRANCH=all BUG=none TEST=editing cli command line does not cause hangs any more Change-Id: I0502553b5e2143052345edeb205a01558fccd9b8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1c171f739497fcd26589976676ab94b23cd7ee8b Original-Change-Id: I4aa38379ac356114fc91a32cced2fa45a00a09d6 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/262714 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Tested-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9891 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22libpayload: cros: add serial number from coreboot tableStephen Barber
Add serial number to lib_sysinfo from coreboot table. BRANCH=none BUG=chrome-os-partner:37813 TEST=ryu boots and /proc/device-tree/firmware/android is populated with "compatible", "hardware", and "serialno" properties Change-Id: I565b332a16b177c51907ffab7976ebd7a665aaaf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5535119f5d499b04bdc178c3040241d2872c4e13 Original-Change-Id: Ie2e222780d1577689a1cbf76ae8514c74fc469f4 Original-Signed-off-by: Stephen Barber <smbarber@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/259140 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22libpayload: usb: fix compilation error in debug fuctionHarry Pan
Since CL:170664, all SC_SPEED_XXX renamed to SC_SPEED1_XXX. There is one missing in xhci_dump_slotctx() function which makes compilation error. BUG=none TEST=enable USB_DEBUG and XHCI_DUMPS macros in xhci_private.h; then emerge-auron libpayload Change-Id: Ib96805cb7fc1cad17b205277539fb2120632f6f4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3ca0174e93ad131309ad07187c95c1e84c7d4fc5 Original-Change-Id: Id056b4684831a5717e87969e95ab17f11db29696 Original-Reviewed-on: https://chromium-review.googlesource.com/261414 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Harry Pan <harry.pan@intel.com> Original-Tested-by: Harry Pan <harry.pan@intel.com> Reviewed-on: http://review.coreboot.org/9877 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21libpayload: add timer driver for cygnusDaisuke Nojiri
BUG=chrome-os-partner:36011 BRANCH=broadcom-firmware TEST=measured 10 seconds in depthcharge: Starting depthcharge on purin... dpch: time 10 9 8 7 6 5 4 3 2 1 0 Change-Id: I0bcb01c255b19518bb8440111ac81f056c07ed69 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f5993bd400dd5d38e62d07bc8ce3513175e0d518 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/200569 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: Id83aae29cec6320d897e0b231d023a9ee885903e Original-Reviewed-on: https://chromium-review.googlesource.com/256415 Reviewed-on: http://review.coreboot.org/9850 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21cygnus: enable serial driver for depthchargeDaisuke Nojiri
BUG=chrome-os-partner:35807 BRANCH=broadcom-firmware TEST=tested input and output by the cli in depthcharge Change-Id: Icd517a366a3fe5bdcf9e9aeb4284d7e4378ee3f2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 02c3b6c82d9d71beb19a0879591c754fa7685362 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/200568 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: I97144fc6f19969b8cf3872939c9c74efaef3604b Original-Reviewed-on: https://chromium-review.googlesource.com/256413 Reviewed-on: http://review.coreboot.org/9844 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21libpayload: mips: Do not set C0_EBase_WGAndrew Bresticker
The WG (write gate) bit in C0_EBase allows the upper two bits of the exception base address to be set to something other than 2'b10, thus allowing it to be relocated out of the traditional KSEG{0,1} range. Since we're not using the segmentation features introduced by EVA to relocate the unmapped segments, the exception vectors should remain in KSEG0. Don't set the WG bit so that the upper two bits of the exception base (2'b00, because of the identity mapping) are ignored and we execute the exception vectors out of KSEG0. BUG=chrome-os-partner:36258 BRANCH=none TEST=Build and boot on Pistachio. Change-Id: Ie8b4eb6e41a328e7055736c9e3f6ff5ec83b9e13 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d5b002f5ae71c7729e467d4fe3fd8db187e15dea Original-Change-Id: Id8b930db1e7a68f52dd61be4dfa9edaee2bebf7d Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/246697 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9822 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21libpayload: mips: Add macros to convert to/from KSEG{0,1} addressesAndrew Bresticker
Add helper macros to convert between physical addresses and KSEG{0,1} addresses. Also get rid of the virt_to_{bus,phys}_offset variables as these are fixed values. As nobody seems to be using getpagesize() on MIPS, no need to keep virtual.c. BUG=chrome-os-partner:36258 BRANCH=none TEST=Build and boot on Pistachio. Change-Id: Ia26c8eae53eb8f860747a6b321363776841d1a94 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c422b02e9a2a20d130913b1cfb835ad74c39ddca Original-Change-Id: I9476cd225a08534830c700cba7bf9d3ef871757e Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247190 Reviewed-on: http://review.coreboot.org/9821 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21libpayload: mips: Use KSEG1 to access DMA-coherent memoryAndrew Bresticker
Use bus_to_virt() to convert the physical address of the DMA coherent region to an address in KSEG1 which is suitable for device memory accesses. BUG=chrome-os-partner:36258 BRANCH=none TEST=Build and boot on Pistachio. Change-Id: If382feda66f6d829f8b3548ab263cf603cab2e9b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a88a175f6d6db81d3154fb5dd31a44363ab94653 Original-Change-Id: I9ad6435495df2c71d8f81a782f1c3dfcfd4aeb28 Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/246696 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9818 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21libpayload: mips: Set BASE_ADDRESS to 0Andrew Bresticker
Now that coreboot has identity-mapped DRAM, use base address 0 (KUSEG) instead of 0x80000000 (KSEG0). BUG=chrome-os-partner:36258 BRANCH=none TEST=Build and boot on Pistachio. Change-Id: I39845250a1b8cea6e5360efce16770751ffce13d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c1cbc1d7f6873c0be30d4206a2030f3b468acf24 Original-Change-Id: I76d98664f1bca73ae8acc9f545e68de9173c3cab Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/246695 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9817 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload udc: Support legal edge case of GET_CONFIGURATION callPatrick Georgi
I doubt anybody will ask for the configuration and request that 0 bytes be returned, but AFAICS that's legal, so let's support it. Should have no effect on ChipIdea since it knows not to send more data than requested by the host. BRANCH=none BUG=none TEST=none Change-Id: Ibfe57b593015fa5e0381c45ff9e39c3f912b4d4d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 45555e929d9d07dbb58ecfd18333f26375a0e3d7 Original-Change-Id: I7432772a1812c6f52c2b1688ee4c6f67d02ccf28 Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/258064 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9790 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload udc: Only enable configuration if it's validPatrick Georgi
Only set internal variables when there's no risk of breaking things. BRANCH=none BUG=none TEST=none Change-Id: I8a8b63f60bdb70fad38130ce38eef81fe3725aa2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7119829096b444b790937b116fb782bcb5da70cd Original-Change-Id: If698b11a7ff7688def310d8574fcfa7a40f703c1 Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/258063 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9789 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload: Enforce strict packet handling order in ChipIdea driverPatrick Georgi
First handle IN packets, then OUT packets and finally SETUP packets. This makes OS X happy. It isn't implemented as the data sheet recommends but it avoids implementing a state machine and should always produce observable effects identical to that of the stateful solution. BRANCH=none BUG=none TEST=`fastboot getvar version` on OSX works Change-Id: Ic7b27387771d6a7794fba12fc822fccc48770ea8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f0e59547519d50b1d34f6abdc6132330125f94f3 Original-Change-Id: Iada1cff011f11e7d5cb1a1b34896ab590f488ec7 Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/258062 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9788 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload: More defensive ChipIdea initializationPatrick Georgi
Mark EP0 non-stall explicitly. Shouldn't be necessary, but won't hurt either. BRANCH=none BUG=none TEST=none Change-Id: I7ecd16a2affe064918d93436aedfa07bd9a1cf56 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a0fc237b33444fc30dc5b62e4f1afc3188f2cf43 Original-Change-Id: I1aa8742eebc4de733317600e35627631ebaf4724 Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/258061 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9787 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload udc: Clear bit when it needs clearingPatrick Georgi
Trivial copy & paste error, likely with no visible effect so far. BRANCH=none BUG=none TEST=none Change-Id: Ieaf5e770ab7a8474e407012d2c11a15c46ab357d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 90f8971500c95456ae70c6f4219b1ff9aff1c0b0 Original-Change-Id: I973573efd0effc9e0173d2b259ce577b6de38de4 Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/258060 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9786 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload udc: Deconfigure device when necessaryPatrick Georgi
SET_CONFIGURATION(0) stops operation and is moves the device to addressed mode. BRANCH=none BUG=none TEST=USB device mode still works Change-Id: I964d90ba8440b6f428896acc9fe63e1114390da6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 402bc907222d07765b3438967edf26cc1a79d775 Original-Change-Id: Iebad024e1ed2e344dba73b73a9b385a4ac4cb450 Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/250791 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9785 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload: Add zero length packet support to UDC frameworkPatrick Georgi
Some IN transfers must be terminated by an empty packet because otherwise the host wouldn't know. The zlp() function determines this requirement in accordance to USB rules: If the transfer's size is aligned to the maximum packet size, and the host expects a larger transfer, add the empty packet as a hint. BRANCH=none BUG=none TEST=USB device mode still works Change-Id: Ia69f3d017f72a3a0e0b21bac72fe97be184c7daa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd0e946e4948a74a9ed15a5eed6ce827b7672a56 Original-Change-Id: I8153cc5bd2ff1c88e383c1dbcddaf1bf72f9194c Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/250790 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9784 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18libpayload: Add USB device mode driverPatrick Georgi
Add a framework for USB device mode controllers and a driver for the ChipIdea controller which is part of the tegra platform. TODO: - fix USB detach/attach - implement zero length packet handling properly BUG=chrome-os-partner:35861 TEST=none BRANCH=none Change-Id: I8defeea78b5a3bdbf9c1b1222c2702eaf3256b81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 542332291880c4026a05a960ceb91d37891ee018 Original-Change-Id: Ib4068d201dd63ebeda80157bd3130f3059919cdd Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/243272 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8756 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17purin: add basic set of files for libpayloadDaisuke Nojiri
BUG=none BRANCH=tot TEST=emerge-purin libpayload depthcharge coreboot chromeos-bootimage Change-Id: I6a46067a288ecea352a2724c62c62066e3f4a383 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 355371317dde0546fbab2cd109bc17463f77c4fd Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I8c43acc4d270c3b2d7c18af07c077a553e3c6f6f Original-Reviewed-on: https://chromium-review.googlesource.com/245492 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9753 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17libpayload: read register width from coreboot tableVadim Bendebury
Some SOCs (like pistachio, for instance) provide an 8250 compatible UART, which has the same register layout, but mapped to a bus of a different width. Instead of adding a new driver for these controllers, it is better to have coreboot report UART register width to libpayload, and have it adjust the offsets accordingly when accessing the UART. BRANCH=none BUG=chrome-os-partner:31438 TEST=with the rest of the patches integrated depthcharge console messages show up when running on the FPGA board Change-Id: I05891a9471a5369d3bfafe90cd0c9b0a7e5a667e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42 Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/240027 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17libpayload: sync arch/arm/cache.c with corebootDavid Hendricks
There was a recent patch by Deepa Dinamani applied to coreboot's cache.c which fixed a bug that occurred when icache is on but dcache is off ("arch: armv7: Fix cache sync instructions."). Although this bug is not likely to be encountered by the time libpayload is run, it's worth applying it to keep things in sync. BUG=none BRANCH=none TEST=n/a since we have icache and dcache enabled on all ARM platforms when libpayload is run. Change-Id: I83d9f96acb702975585e5d47c90e2ddaca488f6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 31f985b58ac9227684fbe27481129ba01fd3ab8a Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I4ab0d97ef3a97dcd0fa96e10273c3b32486e0b40 Original-Reviewed-on: https://chromium-review.googlesource.com/243276 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9737 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17libpayload: Take flash parameters from corebootDan Ehrenberg
A payload may want to run erase operations on SPI NOR flash without re-probing the device to get its properties. This patch passes up three properties of flash to achieve that: - The size of the flash device - The sector size, i.e., the granularity of erase - The command used for erase The patch sends the parameters through coreboot and then libpayload. The patch also includes a minor refactoring of the flash erase code. Parameters are sent up for just one flash device. If multiple SPI flash devices are probed, the second one will "win" and its parameters will be sent up to the payload. TEST=Observed parameters to be passed up to depthcharge through libpayload and be used to correctly initialize flash and do an erase. TEST=Winbond and Gigadevices spi flash drivers compile with the changes; others don't, for seemingly unrelated reasons. BRANCH=none BUG=chromium:446377 Change-Id: I92b7ff0ce66af8d096ec09a4c900829ef6c867e0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126 Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72 Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/239570 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9727 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15Danger: Initial mainboard importDavid Hendricks
This adds a directory with files copied over from Brain along with build-related changes so that emerge-veyron_danger works. The next patch will account for other differences. BUG=none BRANCH=none TEST=emerge-veyron_danger coreboot works Change-Id: I7ebd431cd48e257dfa761d32013d0e251b4f155d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a0f7d2f96540df6fdcd7a99d9e0fa02bbc6c1f73 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id265a7715f07a647a449f00097bf40f7c9b4c068 Original-Reviewed-on: https://chromium-review.googlesource.com/241711 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9646 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Brain: Initial mainboard importDavid Hendricks
This adds a directory with files copied over from Jerry, in addition to build system related changes (configs/* and Kconfig stuff) necessary to emerge-veyron_brain coreboot. The next patch will account for differences between Jerry and Brain. BUG=none BRANCH=none TEST=emerge-veyron_brain coreboot works Change-Id: Ib0da9caf80f46991b96bcb5756f807237f0902e1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 9509d6277dae25a78062c1301054a39f704b33fe Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I972f2623d9b0a43e3ea5312b3c4cd34ab44edc36 Original-Reviewed-on: https://chromium-review.googlesource.com/236989 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9637 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-14libpayload: avoid hanging on make junit.xmlPatrick Georgi
make oldconfig doesn't like 'y' as response to a choice item such as the architecture list. An empty response, however, is acceptable, so use that. Change-Id: Ic3164dd3f40e4a7f5d91e3a7008893655cd69ac2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9676 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14pistachio: modify timer to account for CPU counter overflowIonela Voinescu
Extended the 32bit CPU counter to 64bit by adding a static variable that takes into account CPU counter overflow. The varibale is updated everythime the timer_raw_value function is called so I assume that the function is called often enought to not miss an overflow of the CPU counter. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works as expected BRANCH=none Change-Id: I98bcc56e600dcff0c6da7c140dd34faec5e00885 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 972b105f950d800fa44f27bce090f6b89a5a84b9 Original-Change-Id: Id67b14e9d9c2354bc417b6587b615d466690c9b7 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/247642 Original-Reviewed-by: Daniel Ehrenberg <dehrenberg@chromium.org> Reviewed-on: http://review.coreboot.org/9672 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14arm64: Increase dma region size to 32MiBFurquan Shaikh
BUG=None BRANCH=None TEST=Download and write to kernel partition successful on ryu Change-Id: I9623a0a430e95633dabbb87537a5c70bc9619dde Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 3ba52d7c7baa42de3149cc604423a5825988401e Original-Change-Id: Ia6ba5ad52596c32cc3ad42f98c7f4f8b3e13d6c5 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/242205 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9661 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2015-04-14libpayload dwc2: use bus addresses for buffersIonela Voinescu
The address of the output buffer sent to the device should be the bus address and not the virtual address. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA and bring up board; USB works properly after this change BRANCH=none Change-Id: I5c9d199e17c3f4303095ad73f4980d32d04c6118 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 942c385c112c2a4e409da806548081d3e2f8f438 Original-Change-Id: I0c06196501a968a72cb3f2c7dd1027bb22cdaada Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245387 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9455 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14libpayload dwc2: Use a new FIFO allocation methodhuang lin
Total FIFO length is split into 512 byte blocks. Allocate these blocks to GRXFSIZ and GNPTXFSZ evenly. This method avoids hardcoding and makes the FIFO size value work for dwc2 controllers that have a different FIFO ram size. BUG=chrome-os-partner:32634 BRANCH=None TEST=Boot kernel from USB Change-Id: I78ce0fa4c4600fb56c991874a93bdd6674e648c2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5645a25e95f84359cd10fc9fcf56e1f73fd6ce87 Original-Change-Id: Ib50a08c193f7f65392810ca3528a97554f2c3999 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233119 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9454 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14libpayload: Add dwc2 usb driverhuang lin
BUG=chrome-os-partner:29778 TEST=emerge-veyron libpayload Change-Id: I33f312a939e600b8f4e50a092bb61c5d6bc6d741 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 39ffe53336a2a3b2baa067cdd3dccca5ae93f68e Original-Change-Id: Idad1ad165fd44df635a0cb13bfec6fada1378bc8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/211053 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9453 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
Non-x86 boards currently need to hardcode the position of their CBFS master header in a Kconfig. This is very brittle because it is usually put in between the bootblock and the first CBFS entry, without any checks to guarantee that it won't overlap either of those. It is not fun to debug random failures that move and disappear with tiny alignment changes because someone decided to write "ORBC1112" over some part of your data section (in a way that is not visible in the symbolized .elf binaries, only in the final image). This patch seeks to prevent those issues and reduce the need for manual configuration by making the image layout a completely automated part of cbfstool. Since automated placement of the CBFS header means we can no longer hardcode its position into coreboot, this patch takes the existing x86 solution of placing a pointer to the header at the very end of the CBFS-managed section of the ROM and generalizes it to all architectures. This is now even possible with the read-only/read-write split in ChromeOS, since coreboot knows how large that section is from the CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be changed on systems that place other data next to coreboot/CBFS in ROM). Also adds a feature to cbfstool that makes the -B (bootblock file name) argument on image creation optional, since we have recently found valid use cases for CBFS images that are not the first boot medium of the device (instead opened by an earlier bootloader that can already interpret CBFS) and therefore don't really need a bootblock. BRANCH=None BUG=None TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco. Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229975 Reviewed-on: http://review.coreboot.org/9620 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10serial: Combine Tegra and Rockchip UARTs to generic 8250_mmio32Julius Werner
We have two drivers for a 100%-identical peripheral right now, mostly because we couldn't come up with a good common name for it back when we checked it in. That seems like a pretty silly reason in the long run. Both Tegra and Rockchip SoCs contain UARTs that use the common 8250 register interface (at least for the very basic byte-per-byte transmit and receive parts we care about), memory-mapped with a 32-bit register stride. This patch combines them to a single 8250_mmio32 driver (which also fixes a problem when booting Rockchip without serial enabled, since that driver forgot to check for serial initialization when registering its console drivers). The register accesses are done using readl/writel (as Rockchip did before), since the registers are documented as 32-bit length (with top 24 bits RAZ/WI), although the Tegra SoC doesn't enforce APB accesses to have the full word length. Also fixed checkpatch stuff. A day may come when we can also merge this driver into the (completely different, with more complicated features and #ifdefs) 8250 driver for x86 (which has MMIO support for 8-bit register stride only), both here and in coreboot. But it is not this day. This day I just want to get rid of a 99% identical file without expending too much effort. BUG=None TEST=Booted on Veyron_Pinky and Nyan_Blaze with and without serial enabled, both worked fine (although Veyron has another kernel issue). Change-Id: I85c004a75cc5aa7cb40098002d3e00a62c1c5f2d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e7959c19356d2922aa414866016540ad9ee2ffa8 Original-Change-Id: Ib84d00f52ff2c48398c75f77f6a245e658ffdeb9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/225102 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9387 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-09libpayload: PCI bus scan - Eliminate endless loopLee Leahy
Don't attempt to scan the PCI bus if the bridge is disabled. When the PCI bridge is not setup and enabled, it is possible for the secondary bus register to contain the value zero (0). In this case the usb_scan_pci_bus routine gets into an infinite recursive loop which ends only when the heap or stack is exhausted. This patch verifies that the PCI bridge is enabled by verifying that it is enabled for either memory or I/O operations. When enabled, the secondary bus is scanned. BRANCH=none BUG=None TEST=Build and run on Samus Change-Id: I6826dc1d73b7c24729de5ac7c4d3534922ca73c5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 63d04b47934761351b54c847a2692bdef81ce54f Original-Change-Id: I855240c52fa3eba841e6754816ebbcb824abc4cd Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236382 Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/8734 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-08libpayload: Add drivers for bg4cdDaisuke Nojiri
BUG=chrome-os-partner:32772 BRANCH=none TEST=Built chromeos-bootimage Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I15cb40532855c89f6fb959652a7e874897eb45bb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f8419fe22cf39d827e566b8f4dbe0680e4106a1 Original-Change-Id: I97f2ac8ffc7232c7a6c6d40deb8a35630d3d62a7 Original-Reviewed-on: https://chromium-review.googlesource.com/222662 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9360 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>