summaryrefslogtreecommitdiff
path: root/payloads/libpayload
AgeCommit message (Collapse)Author
2017-06-28libpayload: Add mouse cursor driverPatrick Rudolph
Add a driver to handle multiple low level mouse drivers and provide basic cursor acceleration support. Tested on Lenovo T500. Change-Id: Ib7cec736631b8acf81a14d28daa29ff720777b10 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28payloads: Add whitespace around '<<'Elyes HAOUAS
Change-Id: I0659f6ec59fb808b4cedf57d60d737c13c250042 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20396 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27libpayload/drivers/usb/ehci_private.h: Add brackets around macroElyes HAOUAS
Change-Id: Iee8dc03d5a4ca7537c7da4fed2c67b169c9e2422 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27libpayload/drivers/usb/xhci_private.h: Add parentheses around macroElyes HAOUAS
Change-Id: I0347594e9480dedc4845b6863733a67fc5e47e1c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20371 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-27libpayload/drivers/usb/ohci_private.h: Add brackets around macroElyes HAOUAS
Change-Id: Id4892adba161cd08eecde71a011384b6c465b98f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27libpayload: corebootfb: Add null check for framebuffer addressDuncan Laurie
If the framebuffer address is zero the corebootfb_init() function should abort and not attempt to use it for video, otherwise it will likely hang. This was tested by booting on a board that does not have a display attached and includes the previous patch to zero the framebuffer structure in the coreboot tables. Change-Id: I53ca2e947a7915cebb31b51e11ac6c310d9d6c55 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-26libpayload: Enable building libpayload with march=i586Lee Leahy
Add a Kconfig value to enable building libpayload with the 586 compiler. Update the cross compiler script to add the Kconfig value name that is used when libpayload builds. The Quark SOC does not support some of the instructions generated with the 686 compiler (e.g. CMOV). Success occurs when payloads/libpayload/build/config.h indicates that CONFIG_LP_USE_MARCH_586=1. TEST=Build and run on Galileo Gen2. Change-Id: I04907e9a38ee139bae2e8b227821f54614707c25 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26libpayload/configs: Add configuration for GalileoLee Leahy
Add the default configuration file for the Galileo board. The Quark SOC requires building libpayload with march=i586. TEST=Build and run on Galileo Gen2 Change-Id: Ifd4b533feacbab6f0d357e13d8cebb64bc1c18c6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-07payloads: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I2ec18ca55e0ea672343a951ab81a24a5630f45fd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-07Use www.coreboot.org over coreboot.orgPaul Menzel
<https://coreboot.org> is redirected to <https://www.coreboot.org>. ``` $ curl -I https://coreboot.org HTTP/1.1 301 Moved Permanently Server: nginx/1.8.1 Date: Mon, 05 Jun 2017 10:41:33 GMT Content-Type: text/html Content-Length: 184 Connection: keep-alive Location: https://www.coreboot.org/ ``` So use the command below to use the final location to save a redirect. ``` $ git grep -l https://coreboot.org \ | xargs sed -i 's,https://coreboot.org,https://www.coreboot.org,g' ``` Change-Id: I4176c20ef31399f0063b41e3a0029cca0c1b0ff3 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20035 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-07Use more secure HTTPS URLs for coreboot sitesPaul Menzel
The coreboot sites support HTTPS, and requests over HTTP with SSL are also redirected. So use the more secure URLs, which also saves a request most of the times, as nothing needs to be redirected. Run the command below to replace all occurences. ``` $ git grep -l -E 'http://(www.|review.|)coreboot.org' | xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g' ``` Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-30arm64: Align cache maintenance code with libpayload and ARM32Julius Werner
coreboot and libpayload currently use completely different code to perform a full cache flush on ARM64, with even different function names. The libpayload code is closely inspired by the ARM32 version, so for the sake of overall consistency let's sync coreboot to that. Also align a few other cache management details to work the same way as the corresponding ARM32 parts (such as only flushing but not invalidating the data cache after loading a new stage, which may have a small performance benefit). Change-Id: I9e05b425eeeaa27a447b37f98c0928fed3f74340 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-25detachables: Add invert parameterShelley Chen
Instead of storing inverted-colored bitmaps, invert drawing of text bitmap on the fly by adding an invert parameter down to libpayload. Merging pivot and invert fields into flags field. BUG=b:35585623 BRANCH=None TEST=Make sure compiles successfully CQ-DEPEND=CL:506453 Change-Id: Ide6893a26f19eb2490377d4d53366ad145a9e6e3 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01cbgfx: Add portrait screen supportNickey Yang
cbgfx currently does not support portrait screen which height >width. so add it. Change-Id: I66fee6d73654e736a2db4a3d191f030c52a23e0d Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19474 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-29libpayload/gdb: fix unused variable warningPatrick Georgi
input_underrun is defined but not used. A reasonably new compiler, enabled warnings and warnings-as-error make the build break for no good reason. Change-Id: Ibeb7ba53aad5738938093ab7b34695c9c99c9afe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/19482 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-04-20Turn CBMEM console into a ring buffer that can persist across rebootsJulius Werner
This patch allows the CBMEM console to persist across reboots, which should greatly help post factum debugging of issues involving multiple reboots. In order to prevent the console from filling up, it will instead operate as a ring buffer that continues to evict the oldest lines once full. (This means that if even a single boot doesn't fit into the buffer, we will now drop the oldest lines whereas previous code would've dropped the newest lines instead.) The console control structure is modified in a sorta backwards-compatible way, so that new readers can continue to work with old console buffers and vice versa. When an old reader reads a new buffer that has already once overflowed (i.e. is operating in true ring buffer mode) it will print lines out of order, but it will at least still print out the whole console content and not do any illegal memory accesses (assuming it correctly implemented cursor overflow as it was already possible before this patch). BUG=chromium:651966 TEST=Rebooted and confirmed output repeatedly on a Kevin and a Falco. Also confirmed correct behavior across suspend/resume for the latter. Change-Id: Ifcbf59d58e1ad20995b98d111c4647281fbb45ff Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18301 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19libpayload/libc/console: Flush input driver buffer on initFurquan Shaikh
When console input driver registers itself, perform flush of input buffer to avoid interpreting any stale key presses before libpayload is run. keyboard.c: Remove the redundant buffer flush. 8250.c: Ensure that serial_hardware_is_present is set before call to add input driver. BUG=b:37273808 TEST=Verified that any key presses in serial console before payload is up do not have any effect after the payload starts running. Change-Id: I46f1b6715ccf6418f5b2c741bf90db2ece26a60d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19345 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-17libpayload: cbgfx: Show square images on portrait displaysJulius Werner
CBGFX currently doesn't support portrait screens at all. This will have to be fixed eventually but might take a bit of effort. As a first step to make devices with a portrait panel somewhat usable, this patch will just force a square canvas on these panels and keep the bottom part of the screen black. Also switch set_pixel to calculate framebuffer position via bytes_per_line instead of x_resolution. This is supposed to be the canonical way to do that and may differ in cases where the display controller requires a certain alignment from framebuffer lines. Change-Id: I47dd3bf95ab8a7d8b7e1913e0ddab346eedd46f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19279 Tested-by: build bot (Jenkins) Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2017-04-07libpayload: Add gru configPaul Kocialkowski
This adds a gru libpayload config, that should fit all gru-based devices such as kevin. As gru-based devices are CrOS devices, select the associated config to enable CrOS-specific features. Change-Id: I6e79b763fc497c126612b8786a669a33b57ea29f Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/19137 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-03-15libpayload: usbhub: Force enumeration of all connected ports on initJulius Werner
We have found a non-compliant USB hub (RealTek RTS 5413) that does not set a port's Connect Status Change bit on its USB 3.0 half if the port had already been connected while the hub was being reset. To work around this bug, this patch adds code to initially request the status of every port after a hub was enumerated, clear the Connect Status Change bit if set, and then enumerate the port iff it is currently connected, regardless of whether the change bit was set. A similar behavior can also be found in the Linux kernel. BRANCH=oak BUG=b:35929438 TEST=Booted Elm with this change, my USB 3.0 sticks enumerate now even if they had been plugged in since boot. Change-Id: I8a28252eb94f005f04866d06e4fc61ea265cee89 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18729 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-08libpayload-x86: Enable SSE and FPU when presentPatrick Rudolph
Allows to use SSE and floating point in payloads without digging to much into x86 assembly code. Tested on Lenovo T500 (Intel Core2Duo). Both floating point operation and SSE is properly working. Change-Id: I4a5fc633f158de421b70435a8bfdc0dcaa504c72 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18345 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-23libpayload: Add oak configPaul Kocialkowski
This adds an oak libpayload config, that should fit all oak-based devices such as elm. Change-Id: Iabb71404ff84029a5976371a353e8c92e781ca1f Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/18447 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-02-17libpayload: multiboot - support meminfo flagMathias Krause
Some simple implementation of the MultiBoot protocol may not pass a memory map (MULTIBOOT_FLAGS_MMAP missing in the flags) but just the two values for low and high memory, indicated by the MULTIBOOT_FLAGS_MEMINFO flag. Support those kind of boot loaders too, instead of falling back to the hard-coded values in lib_get_sysinfo(). Tested with a multiboot enhanced version of FILO. Change-Id: I22cf9e3ec0075aff040390bd177c5cd22d439b81 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18350 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-17libpayload: x86/head - implement argc/argv handlingMathias Krause
Implement the argc/argv passing as described in coreboot’s payload API: http://www.coreboot.org/Payload_API While at it, give the code some love by not needlessly trashing register values. Change-Id: Ib830f2c67b631b7216843203cefd55d9bb780d83 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-17libpayload: x86/exec - simplify and robustify the codeMathias Krause
Simplify the code by directly using the arguments on the stack as base pointer relative memory references, instead of loading them into intermediate registers first. Make it more robust by preserving all callee saved registers mandated by the C calling convention (and only those), namely EBP, EBX, ESI and EDI. Don't assume anything about the register state when the called function returns -- beside the segment registers and the stack pointer to be still the same as before the call. Change-Id: I383d6ccefc5b3d5cca37a1c9b638c231bbc48aa8 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18335 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-17libpayload: x86/main - propagate return value of main()Mathias Krause
According to coreboot’s payload API [1], the called payload should be able to return a value via %eax. Support this by changing the prototype of start_main() and pass on the return value of main() to the caller instead of discarding it. [1] https://www.coreboot.org/Payload_API Change-Id: I8442faea19cc8e04487092f8e61aa4e5cba3ba76 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18334 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17libpayload: x86/exec - fix argc/argv value passingMathias Krause
According to coreboot’s payload API [1] the argc value should be passed at stack offset 0x10, so we need to push a dummy value to comply to the API. [1] https://www.coreboot.org/Payload_API Change-Id: Id20424185a5bf7e4d94de1886a2cece3f3968371 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-15libpayload: x86/exec - fix return value passingMathias Krause
The pointer to write the return value to is in %ecx, not %eax. Writing to (%eax) leads to memory corruptions as %eax holds the return value, e.g. would write zero to address zero for a "successful" returning payload. Change-Id: I82df27ae89a9e3d25f479ebdda2b50ea57565459 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18332 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-15libpayload: x86/exec - fix libpayload API magic valueMathias Krause
According to coreboot’s payload API [1] the magic value passed to the payload should be 0x12345678, not 12345678. Fix that. [1] https://www.coreboot.org/Payload_API Change-Id: I10a7f7b1a4aec100416c5e7e4ba7f8add10ef5c5 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18331 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-25libpayload: fix buildPatrick Georgi
When .xcompile doesn't already exist, building libpayload fails because the CC variable (et al) remain empty since .xcompile is only included after the variables coming from there are evaluated. Change-Id: I73f1cbced95afcff15839604fea5fd05d81bc3d3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18228 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24build system: don't run xcompile or git for %clean/%config targetsPatrick Georgi
It takes a long time for no gain: We don't need to update the submodules, we don't need to fetch the revision, we don't need to find the compilers, when all we want to do is to manipulate the .config file or clean the build directory. Change-Id: Ie1bd446a0d49a81e3cccdb56fe2c43ffd83b6c98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18182 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24libpayload: drivers/keyboard: report power button eventsShelley Chen
Power button events are usually dropped because the button is not in the keyboard matrix range. Add condition to forward it like other keys. BUG=chrome-os-partner:61275 BRANCH=None TEST=reboot and make sure power button selection in depthcharge's detachable menus is processed on reef. Change-Id: I86897fa8d73a56533ef62bba05458ac3d339237e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 25654e214f0ab8685d445ced62612a02be851126 Original-Change-Id: I516a0043bd7730789728d5c5498d0a0f30a2acac Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/428199 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://review.coreboot.org/18177 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-19libpayload: Enable USB HID in veyron configurationPaul Kocialkowski
This enables USB HID support in the veyron config, since it seems to work correctly and is needed for interaction with depthcharge on devices without an embedded keyboard (such as veyron_mickey). Change-Id: Icae829e3a132005df17bcb6f7e6f8a190912576d Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/17930 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-01-13libpayload: usb: Reset ohci controller when trying to shutdown ohciJeffy Chen
Currently we just disabled ohci interrupts when calling ohci_shutdown, Which would not actually shutdown the ohci controller, for example it may still written the increased HccaFrameNumber to Hcca buffer. Perform a soft reset to ohci controller as the linux kernel ohci-hcd driver does. BUG=chrome-os-partner:60996 BRANCH=None TEST=Checked on gru, no more "BUG: Bad page state" error in kernel. Change-Id: I128ab6ba455ac5383a4d48be0bc12b8bb4533464 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4749fc82fdd1b74ca3f2ed3fdf0ef53a5e161087 Original-Change-Id: I3f192aea627ba2fa69533bc0a4270466ca18f2a7 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/426338 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/18125 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-13libpayload: Add VPD address into lib_sysinfoKan Yan
BUG=chrome-os-partner:56947 TEST=Verifed country code can be parsed from VPD in depthcharge. BRANCH=None Change-Id: I2fbbd4a784c50538331747e1ef78c33c6b8a679b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: acea6e2a200e8bd78fd458255ac7fad307406989 Original-Change-Id: I4616fefc6a377d7830397cdadb493927358e25cc Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/425819 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18124 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-13libpayload: Update ARM CrOS devices configurationPaul Kocialkowski
This updates the configuration for ARM CrOS devices (nyans and veyrons) by using the CHROMEOS Kconfig option, thus reducing the number of options to select. It also brings proper serial console support. Change-Id: Iffc84c44a1d339c5bb575fbaffc40bc2d56bb6cf Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/17928 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-01-06libpayload: usb: handle situation with no free device addressPatrick Georgi
Change-Id: I1308bdca90f1a09d980f384ee85552198a39b965 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1260940 Reviewed-on: https://review.coreboot.org/18036 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06libpayload: xhci: plug leakPatrick Georgi
Change-Id: Ia163872846906c6c78144a984a405812f856f626 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1325835 Reviewed-on: https://review.coreboot.org/18035 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06libpayload: timer: cast cpu_khz to make sure 64bit math is usedPatrick Georgi
Change-Id: Iaf84de2330b433076a66c22fa72ffb45e957c0dc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1261177 Reviewed-on: https://review.coreboot.org/18034 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-21libpayload: Get current tick from high register in generic timerPaul Kocialkowski
This fixes the generic timer driver to get the current tick from the high register, so that comparison with the high count value (obtained previously from the same register) has a chance to succeed. Change-Id: I5ce02bfa15a91ad34641b8e24813a5b7ca790ec3 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/17929 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-14libpayload/drivers/video: Improve check in if conditionPatrick Georgi
Coverity considers this a copy&paste error, and maybe it is. In any case, it makes sense to check the variable that (if the condition is true) is changed, and the values are the same before that test, so the change is harmless. Change-Id: I163c6a9f5baa05e715861dc19643b19a9c79c883 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1347376 Reviewed-on: https://review.coreboot.org/17837 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-14libpayload/.../PDCurses: Improve compatibility with ncursesPatrick Georgi
Coverity erroneously complains that we call wmove with x or y == -1, even though our copy of that function properly checks for that. But: setsyx is documented to always return OK (even on errors), so let it do that. (and make coverity happy in the process) Change-Id: I1bc9ba2a075037f0e1a855b67a93883978564887 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1260797 Reviewed-on: https://review.coreboot.org/17836 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-14libpayload/.../PDCurses: avoid reading orig before NULL checking itPatrick Georgi
Coverity complains and that (unfortunately) means that some compiler might take advantage of the same fact. Change-Id: I59aff77820c524fa5a0fcb251c1268da475101fb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1261105 Reviewed-on: https://review.coreboot.org/17835 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-08libpayload: Add Cougar Point PCH's AHCI to whitelistNico Huber
Change-Id: Ie8ca342a32323be4c26c236a5209052ec724317f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17353 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-25libpayload: increase MAX_ARGC_COUNTJeremy Compostella
MAX_ARGC_COUNT limits the payload to ten parameters which is not enough when used with a proprietary first stage bootloader providing hardware description using around 20 parameters. This patch makes the libpayload able to get up to 32 parameters. Change-Id: I49925040d951dffb9c11425334674d8d498821f2 Signed-off-by: Jeremy Compostella <jeremy.compostella@gmail.com> Reviewed-on: https://review.coreboot.org/17467 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-17libpayload: Reintroduce CONFIG_LP_CHROMEOS to set suitable defaultsJulius Werner
Chrome OS builds always have some inherent differences to "standard" libpayload configurations: they don't want to use curses or things like storage drivers, they always use the coreboot framebuffer and USB, etc. This patch reintroduces CONFIG_LP_CHROMEOS as an option that only affects Kconfig defaults. This allows Chrome OS builds to select most of what they need in one go and reduces board-specific .config files to only the options that are really specific to that board. Also restricts the 8250_SERIAL_CONSOLE Kconfig to only default to yes on x86 boards, which probably makes sense for all of libpayload (some but far from all ARM boards use 8250-compatible UARTs, and we should probably not default a platform option unless it's going to be correct with very high probability). BRANCH=None BUG=None TEST=Built and booted Jerry and Oak. Change-Id: Ie0c0593ffd399608d2cbfb83d20891f6f1864914 Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Commit-Id: e558f59 Original-Change-Id: I609637cd2ea7dfb4558aa3c04c90b64038c9ab57 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347970 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17024 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-17libpayload: Replace majority of timer drivers with a generic oneJulius Werner
Currently every non-x86 platform supported by libpayload needs to provide its own timer driver. Most of the ones we have accumulated there look almost identical: For the frequency, return a preset constant. For the value, read a 32-bit register, possibly read another 32-bit register and shift+OR it with the previous one, then return that. Let's replace this with a single .c file that can easily handle all of those cases. Menuconfig convenience can still be maintained by providing several presets that select different defaults for the driver's configuration options (register address(es) and frequency). Removes an "enabled" check from Samsung MCT driver since coreboot always unconditionally enables that timer anyway. CQ-DEPEND=CL:344809 BRANCH=None BUG=None TEST=Booted Oak and Veyron, observed how dev-mode delay was still ~30s Change-Id: I61cb7d2ffd4902aa841c57f9afa9cd991f770acd Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Commit-Id: a036af6 Original-Change-Id: I9784e7c6aa5abd6d92478ea7ec1cf42c9a437546 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347749 Reviewed-on: https://review.coreboot.org/17023 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-09libpayload: mvmap2315: Introduce timer driverHakim Giydan
Testing: booted successfully. Change-Id: I4a50c9fb7aec929ea29a3cf2eec3e424e3629c92 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16692 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-08libpayload: Fix strtok_rJeremy Compostella
This patch makes strtok_r: - handle the end of the string - handle string that contains only delimiters - do not set ptr outside of str Change-Id: I49925040d951dffb9c11425334674d8d498821f1 Signed-off-by: Jeremy Compostella <jeremy.compostella@gmail.com> Reviewed-on: https://review.coreboot.org/16524 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-08-27cbfs: Add "struct" file type and associated helpersJulius Werner
This patch adds functionality to compile a C data structure into a raw binary file, add it to CBFS and allow coreboot to load it at runtime. This is useful in all cases where we need to be able to have several larger data sets available in an image, but will only require a small subset of them at boot (a classic example would be DRAM parameters) or only require it in certain boot modes. This allows us to load less data from flash and increase boot speed compared to solutions that compile all data sets into a stage. Each structure has to be defined in a separate .c file which contains no functions and only a single global variable. The data type must be serialization safe (composed of only fixed-width types, paying attention to padding). It must be added to CBFS in a Makefile with the 'struct' file processor. Change-Id: Iab65c0b6ebea235089f741eaa8098743e54d6ccc Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-13libpayload: head.S: Avoid clearing BSS (and heap) againJulius Werner
3 out of 4 architectures currently zero out the payload BSS in early assembly code, which is pointless since the code loading the payload has already done that (with a more efficient memset). ARM64 has never had any code like this and can run just fine without it. This also defeats the new optimization of moving the heap out of the BSS, since all three implementations assume that everything between _edata and _end is BSS. We should just take this out. Change-Id: I45cd2dabd94da43ff0f77e990f11c877cee6cda1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16091 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-12libpayload: cbfs: Fix minor memory leak in some edge casesJulius Werner
cbfs_get_handle() allocates memory for a handle and doesn't free it if it errors out later, leaving the memory permanently leaked. Fix. Change-Id: Ide198105ce3ad6237672ff152b4490c768909564 Reported-by: Coverity Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16207 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-08libpayload: lzma: Allocate scratchpad on the heapJulius Werner
Allocating a 15980-byte scratchpad on the stack when your default stack size is set to 16KB is really not a great idea. We're regularly overflowing into the end of our heap when using LZMA in libpayload, and just happen not to notice it because the heap rarely gets filled up all the way. Of course, since we always *have* a heap in libpayload, the much saner solution is to just use it directly to allocate the scratchpad rather than accidentally grow backwards into it anyway. Change-Id: Ibe4f02057a32bd156a126302178fa6fcab637d2c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16089 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08libpayload: arm64: Fix MMU range overlap checkJulius Werner
The ARM64 MMU code maintains a list of used ranges, to avoid mapping the DMA buffer over the coreboot tables and things like that. Unfortunately, the overlap with ranges in that list is checked with (start1 >= start2 && start1 <= end2) || (end1 >= start2 && end1 <= end2) which is not a full overlap check and misses the case where the second region is completely contained within the first. This patch replaces that code with a properly vetted primitive from Stack Overflow. BRANCH=none BUG=chrome-os-partner:54416 TEST=Observe how Kevin recovery screen now gets drawn at 10x the speed. Change-Id: I7e2706426762794e160d743bbfc40da1e26eee12 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16075 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-02libpayload: split "Drivers" config section in KconfigAntonello Dettori
Move the configuration of the timer, storage and USB drivers from the main Kconfig to three separate ones stored in the respective directories. This reduces the LOC of Kconfig and makes it more manageable. Change-Id: I0786dbc1d5d8317c8ccb600f5de9ef4a8243d035 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/15914 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31libpayload: fix leak in libcbfsPatrick Georgi
stage wasn't freed on errors. Change-Id: I10d2f42f3e484955619addbef2898981f6f90a35 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1347345 Reviewed-on: https://review.coreboot.org/15958 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31libpayload: Drop superfluous "continue"Patrick Georgi
Change-Id: I5a1d1ce8ba268b08d1275f392f0b9e602860c6ab Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1260729 Reviewed-on: https://review.coreboot.org/15957 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Omar Pakker
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-02cbgfx: Use memset() for faster screen clearing if possibleJulius Werner
cbgfx currently makes a separate function call (recomputing some values) for every single pixel it draws. While we mostly don't care that much about display speed, this can become an issue if you're trying to paint the whole screen white on a lowly-clocked Cortex-A53. As a simple solution for these extreme cases, we can build a fast path into clear_screen() that just memset()s the whole framebuffer if the color and pixel format allow it. BUG=chrome-os-partner:54416 TEST=Screen drawing speed on Kevin visibly improves (from 2.5s to 3ms). Change-Id: I22f032afbb86b96fa5a0cbbdce8526a905c67b58 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15524 Tested-by: build bot (Jenkins) Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21libpayload/pci: Correct MASK macro namesFurquan Shaikh
BUG=chrome-os-partner:54563 Change-Id: I8ef1c595205fe46dd64357051eeb232e2bbbebc1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15270 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-12libpayload: usb: xhci: Support rockchip xHCI controllerLiangfeng Wu
1. Make the xHCI driver to support xHCI controller v1.1 2. And a new function xhci_ring_doorbell(), it aims to add a memory barrier before ringing the doorbell, to ensure all TRB changes are written to memory. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB on Kevin rk3399 platform Change-Id: Ife1070d1265476d0f5b88e2acf3299fc84af5832 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c21e92 Original-Change-Id: I4e38e04dc3c7d32ee4bb424a473c70956a3c3ea9 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/346831 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15111 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-05-24arm64: Add stack dump to exception handlerJulius Werner
Some exceptions (like from calling a NULL function pointer) are easier to narrow down with a dump of the call stack. Let's take a page out of ARM32's book and add that feature to ARM64 as well. Also change the output format to two register columns, to make it easier to fit a whole exception dump on one screen. Applying to both coreboot and libpayload and syncing the output format between both back up. Change-Id: I19768d13d8fa8adb84f0edda2af12f20508eb2db Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14931 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-17libpayload: cbfs: Add cbfs_handle API for more fine-grained accessesJulius Werner
The libpayload CBFS APIs are pretty old and clunky, primarily because of the way the cbfs_media struct may or may not be passed in and may be initialized inside the API calls in a way that cannot be passed back out again. Due to this, the only real CBFS access function we have always reads a whole file with all metadata, and everything else has to build on top of that. This makes certain tasks like reading just a file attribute very inefficient on non-memory-mapped platforms (because you always have to map the whole file). This patch isn't going to fix the world, but will allow a bit more flexibility by bolting a new API on top which uses a struct cbfs_handle to represent a found but not yet read file. A cbfs_handle contains a copy of the cbfs_media needed to read the file, so it can be kept and passed around to read individual parts of it after the initial lookup. The existing (non-media) legacy API is retained for backwards compatibility, as is cbfs_file_get_contents() (which is most likely what more recent payloads would have used, and also a good convenience wrapper for the most simple use case), but they are now implemented on top of the new API. TEST=Booted Oak, made sure that firmware screens and software sync worked okay. Change-Id: I269f3979e77ae691ee9d4e1ab564eff6d45b7cbe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14810 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09coreboot_tables: Extend serial port descriptionLee Leahy
Extend the serial port description to include the input clock frequency and a payload specific value. Without the input frequency it is impossible for the payload to compute the baud-rate divisor without making an assumption about the frequency. This breaks down when the UART is able to support multiple input clock frequencies. Add the UART_PCI_ADDR Kconfig value to specify the unique PCI device being used as the console UART. Specify this value as zero when the UART is not on the PCI bus. Otherwise specify the device using bus, device and function along with setting the valid bit. Currently the only payload to consume these new fields is the EDK-II CorebootPayloadPkg. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: Id4b4455bbf9583f0d66c315d38c493a81fd852a8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14609 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09libpayload: ipq40xx: Introduce timer and uart driverVaradarajan Narayanan
BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Change-Id: Ibf2c91be93e2567cc1262b6fb84461eef51ab3e0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b87157138302b017e64a28417a22421c880c1bcb Original-Change-Id: I16a8324d3c8ef4ee729f4509fda5bfe703b24ce4 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333304 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14656 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09libpayload/arm64: Mark existing framebuffer as DMAablePatrick Georgi
If a framebuffer is already configured by coreboot, libpayload's MMU tables didn't mark its memory DMAable (unlike when libpayload set up its own framebuffer memory). BRANCH=none BUG=chrome-os-partner:52826 TEST=depthcharge's recovery screen is not corrupted anymore on kevin Change-Id: I228a861b3fdcf1298a3cfa0a054214c78ed55e70 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 889e8358a0f2f504abd9910549aa68f3992bb4e8 Original-Change-Id: I7ba79151ccc1eb605f82e1869a74b539a6be5e99 Original-Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/341092 Reviewed-on: https://review.coreboot.org/14685 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09libpayload: xhci: Set MPS based on speedVaradarajan Narayanan
BUG=chrome-os-partner:49249 TEST=Compiles and boots and detect USB storage BRANCH=none Change-Id: I9007399e1f785e6f1d2258225e3f7cc602053aed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1db43f53973d2124e41186777caa829aa346ace3 Original-Change-Id: I943d19a3a7d785bd075073b57ba6388662d7df90 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333311 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14659 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09libpayload: Add nyan configPaul Kocialkowski
This adds a nyan libpayload config, that should fit all nyan devices. Change-Id: I6b86a03054a7625534fd38ee6a21d3b91fb43589 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/14473 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-21libpayload: time: split time.h from libpayload.hStef van Os
Move time functions and prototypes from libpayload.h to time.h. In a similar manner to other c libary headers, this change makes porting existing applications to libpayload easier. Change-Id: I71e27c6dddde6e77e0e9b4d7be7cd5298e03a648 Signed-off-by: Stef van Os <stef.van.os@prodrive-technologies.com> Reviewed-on: https://review.coreboot.org/14437 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-18libpayload: disable EHCI & XHCI in defconfig-mipsMartin Roth
drivers/usb/xhci.c and drivers/usb/ehci.c both require arch/barrier.h. barrier.h is present for x86, arm, and arm64, but not for mips. This is generating a build error after enabling USB by default on libpayload. I believe that this slipped through the buiders due to them not getting cleaned fully. It was caught in the coverity scan and when setting up a new build server. Change-Id: Idd89409a048009c087ce2a787d96a1efd089157f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14391 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-04-16libpayload: Split off generic serial API from 8250 driverStefan Reinauer
There is a lot of generic code in the 8250 driver that should be available for non-8250 systems with serial ports as well. Change-Id: I67fcb12b5fa99ae0047b3cbf1815043d3919437e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14371 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-14libpayload: Enable USB support by defaultMarcel Meißner
Most people use USB keyboards. Change-Id: Ia7cf513059565db7b86190c4aae62d7a35392408 Signed-off-by: Marcel Meißner <mm-meissner@gmx.de> Reviewed-on: https://review.coreboot.org/7540 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-06libpayload/libc: Fix memset/sizeof usageJonathan Neuschäfer
Since r is a pointer, memset(r, 0, sizeof(r)) would only zero the first 4 (or 8) bytes of the newly allocated struct align_region_t. An alternative to this patch would be to use calloc, or introduce a new zalloc (zeroed allocation; a single-element calloc) and use that. Change-Id: Ic3e3487ce749eeebf6c4836e62b8a305ad766e7e Found-by: Coverity (ID 1291160) Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14244 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-05libpayload: mmu: Initialize the base 4GiB as device memoryhuang lin
This allows to accommodate different platforms' default configurations, memory configuration is fine tuned later during boot process. BUG=chrome-os-partner:51537 BRANCH=none TEST=none yet, the full stack of patches boots fine on EVB Change-Id: I39da4ce247422f67451711ac0ed5a5e1119ed836 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 97a9a71ade4df8a501043f9ae58463a3135e2a4f Original-Change-Id: I39da4ce247422f67451711ac0ed5a5e1119ed836 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332384 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/13914 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-25libpayload: update junit.xml target, clean up outputMartin Roth
- Copy each config in configs/ to the junit_config, update each, in turn, and clean up when done. This avoids updating the saved config files and creating dirty files in git. - Use 'make olddefconfig' instead of 'yes "" | make oldconfig' - Update clean target to remove junit_config file - Update distclean target to remove junit.xml Change-Id: Ib023eb3197f2d8806c73c9c18464157ce3de958f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14164 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16libpayload: recreate config filesStefan Reinauer
Add all the default options with: for i in configs/* do cp $i .config make savedefconfig mv defconfig $i done This also switches to minimal config files instead of the full configuration files that were previously checked in. Change-Id: If18a32eca4df9e1dfeb0e212b652d972cea8e4b8 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14077 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-03-15libpayload: Move base address, stack and heap size to KconfigStefan Reinauer
This will allow more payloads to use the standard linker script instead of implementing their own. Change-Id: Ie60120769829f427ceb722109d85859b61dbde31 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14074 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Make comment into help textStefan Reinauer
Change-Id: I8c8669e73e335e12cb3785cf84b878c305dd5929 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14068 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Fix ARM workaround codeStefan Reinauer
_LDFLAGS+="foo" did not work in my shell (bash on Ubuntu 15.10), so change it to _LDFLAGS="$_LDFLAGS foo". I'm mildly surprised that this ever worked. Change-Id: I59c10f34992240c6df2ec7f24aebc6daafb76493 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14076 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Add comment about ARM64 exception stackStefan Reinauer
Change-Id: I8b74cbf6bdde32c90ad0510e14e899711269e57f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14075 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Move MEMMAP_RAM_ONLY to generic optionsStefan Reinauer
MEMMAP_RAM_ONLY is not an architecture specific option, hence move it out of the architecture specific menu. Change-Id: Iaeef03ed8cbff930a580ad03b1e712087b48714e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14071 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Drop CONFIG_LP_CHROMEOSStefan Reinauer
This is adding complexity to the code more than it saves space, plus some of the tables could potentially be interesting outside of the ChromeOS context. Change-Id: I4bf24608f3e26d3b7871a5031ae8f03bc2c8c21f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14070 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Unify defconfigsStefan Reinauer
Bring defconfig and defconfig-tinycurses in sync, so that defconfig and defconfig-tinycurses only differ in the selection of the curses implementation. Change-Id: I739c5122b5aaaa2681055c845905721a0b2a11c1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14069 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11codebase: Change makefile $(shell pwd) commands to $(CURDIR)Martin Roth
- Change the makefile command $(shell pwd) to $(CURDIR) to find the current directory without going out to the shell. Change-Id: I4890eba6129630acd2883b92de77308d39949443 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13967 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-22cbfs: Add LZ4 in-place decompression support for pre-RAM stagesJulius Werner
This patch ports the LZ4 decompression code that debuted in libpayload last year to coreboot for use in CBFS stages (upgrading the base algorithm to LZ4's dev branch to access the new in-place decompression checks). This is especially useful for pre-RAM stages in constrained SRAM-based systems, which previously could not be compressed due to the size requirements of the LZMA scratchpad and bounce buffer. The LZ4 algorithm offers a very lean decompressor function and in-place decompression support to achieve roughly the same boot speed gains (trading compression ratio for decompression time) with nearly no memory overhead. For now we only activate it for the stages that had previously not been compressed at all on non-XIP (read: non-x86) boards. In the future we may also consider replacing LZMA completely for certain boards, since which algorithm wins out on boot speed depends on board-specific parameters (architecture, processor speed, SPI transfer rate, etc.). BRANCH=None BUG=None TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on Oak to be about ~20ms faster (cutting load times for affected stages almost in half). Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13638 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-19libpayload: honor TSC information under CONFIG_LP_TIMER_RDTSCAaron Durbin
When CONFIG_LP_TIMER_RDTSC is enabled honor the TSC information exported in the coreboot tables as the cpu_khz frequency. That allows get_cpu_speed() not to be called which currently relies on the 8254 PIT. As certain x86 platforms allow that device to be optional or turned off for power saving reasons, allow a path where get_cpu_speed() is no longer called. Additionally, this approach also allows the libpayload to not duplicate logic that already exists in coreboot. BUG=chrome-os-partner:50214 BRANCH=glados TEST=Confirmed in payload TSC frequency is honored instead of using get_cpu_speed(). Change-Id: Ib8993afdfb49065d43de705d6dbbdb9174b6f2c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13671 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-09libpayload: use 32bit access when accessing 4byte wide uart registersPatrick Georgi
This fixes serial on rk3288. Change-Id: I3dbf3cc165e516ed7b0132332624f882c0c9b27f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13636 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-02-04libpayload: Add timer driver for armada38xRuilin Hao
Add timer driver for armada38x BUG=chrome-os-partner:47462 TEST=emerge-cyclone libpayload BRANCH=tot Change-Id: Iefb6d1fcb907edb54d55ba8addfb66329af6c3c7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cd467160ecab050a541a445c2afab9e6bc625635 Original-Change-Id: Id42bafdbc34295b6f8afe5610fb3bab0e0e1b6e8 Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313343 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13114 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-14cbgfx: add error code to cbgfx_initDaisuke Nojiri
cbgfx_init can fail for multiple reasons. These codes help debugging cbgfx_init. BUG=chromium:502066 BRANCH=tot TEST=Tested on Glados Change-Id: Ifaa8d91b058bd838a53faf5d803c0337cb1e082c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4caf2496f3583e133f3f216ec401515c267e6e7b Original-Change-Id: I84f60dd961db47fa426442172ab19676253b9495 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/315550 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12930 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-12-16libpayload: add archive.hDaisuke Nojiri
archive.h is a header file for the programs which need to parse an archive created by 'archive' tool. See archive.h for the format description. BUG=chromium:502066 BRANCH=tot TEST=Tested on Glados Change-Id: I2bee9d7c12b0e1bce1529dfef360c5fa4ce0872d Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/311201 Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://review.coreboot.org/12734 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06libpayload/configs/config.veyron: Use CONFIG_LP_8250_SERIAL_CONSOLEMartin Roth
- Update to use the CONFIG_LP_8250_SERIAL_CONSOLE instead of the removed CONFIG_LP_8250_MMIO32_SERIAL_CONSOLE. - CONFIG_LP_LZ4 and CONFIG_LP_PL011_SERIAL_CONSOLE are set to the default values for these new config options. CONFIG_LP_8250_MMIO32_SERIAL_CONSOLE was removed in commit 4d5317e5 (libpayload: Remove redundant 8250 MMIO32 UART driver) Change-Id: I97461c5e0c14075dcf8a35c96a0b0f1651e2e8e4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12654 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06libpayload/configs/config.purin: Use CONFIG_LP_8250_SERIAL_CONSOLEMartin Roth
- Update to use the CONFIG_LP_8250_SERIAL_CONSOLE instead of the removed CONFIG_LP_8250_MMIO32_SERIAL_CONSOLE. - CONFIG_LP_LZ4 and CONFIG_LP_PL011_SERIAL_CONSOLE are set to the default values for these new config options. CONFIG_LP_8250_MMIO32_SERIAL_CONSOLE was removed in commit 4d5317e5 (libpayload: Remove redundant 8250 MMIO32 UART driver) Change-Id: I2775c3676d5f458a4c31fe0c1d571bc2b9221a5c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12653 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-03libpayload: get cbfs offset & size for default media from lib_sysinfoDaisuke Nojiri
This change revives the path which was made inert by CL:308520. When media == CBFS_DEFAULT_MEDIA, cbfs_get_file replaces it with a pointer to a default media. Thus, get_cbfs_range does not set cbfs offset & size from lib_sysinfo. BUG=chrome-os-partner:47772 BRANCH=tot TEST=Tested on Jerry and Glados Change-Id: I012f7871336dd24b8eada5c96c4d72117921b0d2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 279ba344788b4ba85f500e6cfcca8199af6d0a89 Original-Change-Id: I7f0798881519026a23d0801d0a790332ab878ff0 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/313205 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/12583 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-28libpayload: Remove redundant 8250 MMIO32 UART driverAlexandru Gagniuc
The more generic 8250 driver can handle both port-mapped and memory- mapped 8250-compatible UARTs, with different register sizes. Thus, a separate driver for MMIO32 is not needed. The generic 8250 driver was tested to work for both output and input, on Apollolake SoC, which only presents an MMIO32 UART. Change-Id: Idab766588ddd097649a37de92394b0078ecc660a Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/12524 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-20libpayload: PDCurses: Remove trailing whitespaceStefan Reinauer
find . -type f |xargs perl -pi -e 's, *$,,' find . -type f |xargs perl -pi -e 's, *$,,' Change-Id: I62c2bc15b7c395a68b68422e701edf98b08e27c6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12399 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-13libpayload: udc/dwc2: Ignore setup packet in check for queue emptyFurquan Shaikh
during shutdown DWC2 UDC controller always requires an active packet to be present in EP0-OUT to ensure proper operation of control plane. Thus, during shutdown ignore EP0-OUT for queue empty check if only 1 packet is present. BUG=b:24676003 BRANCH=None TEST=Compiles successfully. "fastboot reboot-bootloader" reboots device without timeout in udc shutdown. Change-Id: Iafe46c80f58c4cd57f8d58f060d805b603506bbd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4e7c27d849c0411aae58e60a24d8170a27ab8485 Original-Change-Id: Ifa493ce0e41964ee7ca8bb3a1f4bb8726fa11173 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311257 Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12413 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2015-11-13libpayload: queue: Add a helper macro for checking singleton queueFurquan Shaikh
Check if the simple queue consists of only 1 element. BUG=b:24676003 BRANCH=None TEST=Compiles successfully. Change-Id: Ib257a5e6b9042b42c549f8ad8b943e3b75fd8c9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5435d6fec1c4fbb4c04ba5b8c15caff9ee4e50f0 Original-Change-Id: I7a8cb9c4e7e71956e85e65b3e7b8e0af4d354110 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311256 Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12412 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2015-11-11libpayload: Rename PDCurses-3.4 to PDCursesStefan Reinauer
Change-Id: If881ec130833c7e7e62caa3d31e350a531f5bc8e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12398 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>