summaryrefslogtreecommitdiff
path: root/payloads/libpayload/include
AgeCommit message (Collapse)Author
2013-03-14libpayload: Generalize and redistribute timekeeping codeGabe Black
The timekeeping code in libpayload was dependent on rdtsc, and when it was split up by arch, that code was duplicated even though it was mostly the same. This change factors out actually reading the count from the timer and the speed of the timer and puts the definitions of ndelay, udelay, mdelay and delay into generic code. Then, in x86, the timer_hz and timer_get_raw_value functions which used to be in depthcharge were moved over to libpayload's arch/x86/timer.c. In ARM where there isn't a single, canonical timer, those functions are omitted with the intention that they'll be implemented by a specific timer driver chosen elsewhere. Change-Id: I9c919bed712ace941f417c1d58679d667b2d8269 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2717 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Add size_t and ssize_t types for ARM and x86Gabe Black
Some new TPM drivers in depthcharge require that type. I added it to arch/types.h which seemed appropriate, but I'm not sure that's exactly the right header to use, or in other words if you'd get that type from libpayload the same way you'd get it if you were building a standard Linux program. Also, I attempted to determine what underlying types gcc would use, and while I think I picked the right ones I'm not 100% certain of that either. Change-Id: Ic5c0b4173c8565ede3bfce8870976d596d69e51d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2669 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Add usb_generic_(create|remove) functions for unrecognized devicesGabe Black
It might be useful to provide a USB driver in the payload itself instead of in libpayload. For example there are multiple payloads being built and linked against the same libpayload, and they might not need or even want to have the same set of drivers installed. This change adds two new functions, usb_generic_create and usb_generic_remove, which behave like the usbdisk_create and usbdisk_remove functions which are defined for USB mass storage devices. If a USB device isn't recognized and claimed by one of the built in USB class drivers (currently hub, hid, and msc) and the create function is defined, then it will be called to give the payload a chance to use the device. Once it's removed, if usb_generic_remove is defined it will be called, effectively giving the payload notice. Built and booted depthcharge on Link. Built depthcharge for Daisy. Built a netbooting payload, called usb_poll() with those functions implemented, and verified that they were called and that the devices they were told about were reasonable and the same as what was reported by lsusb in the booted system. Change-Id: Ief7c0a513b60849fbf2986ef4ae5c9e7825fef16 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2666 Tested-by: build bot (Jenkins) Reviewed-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Start using only internal and compiler headers.Ronald G. Minnich
When building other payloads with lpgcc the -nostdinc flag was injected into CFLAGS, but when building libpayload itself some headers were being used from the host system. This change puts -nostdinc into the Makefile and xcompile script, fixes up one include path in include/inttypes.h, adds the compiler provided include directory to the include search path, and deletes the two now redundant stdint.h files. BUG=None TEST=With this and other changes, built libpayload and depthcharge for Daisy, Link, and Fox. BRANCH=None Change-Id: Ia7817fceab5297cd82ccc0d392330de0df61980e Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-13libpayload: Add more parenthesis to the endian conversion macrosGabe Black
There weren't enough parenthesis in the macros so operations might only apply to the last part of an expression passed in as an argument. Change-Id: I5afb406f9409986e45bbbc598bcbd0dd8507ed35 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2665 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-13libpayload: Make the source for lzma decompression constGabe Black
Change-Id: I9a16331dedc97f17af94bf2cf535a9c93d1729a0 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2667 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-03-13libpayloads: Provide BSD/glibc style endian functions.Hung-Te Lin
The functions in endian.h (betoh{l,w,ll} and others) were named differently from the well-known BSD/glibc style endian functions (ex, betoh{16,32,64}). We should provide the BSD/glibc style functions to prevent confusion. Change-Id: Ia3bee481ba7989ac25b79ddb89bc6819d52fd8c3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2705 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-04libpayload: Catch exceptions and print out an error message.Ronald G. Minnich
Give some indication what happened instead of just crashing. As part of setup, cause an exception and make sure that we get the right one, and that we recover correctly. Hence we have some assurance that if they really happen we can handle them. Built and booted into test payload on Snow. Saw the built in test function worked correctly. Artificially added code which got an exception and saw that the error information prints correctly. Change-Id: I2e0d022f090ee422fb988074fbb197afa2485caa Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2569 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-02-26libpayload: Add a pointer for user data on the USB MSC data structure.Gabe Black
This is so the user of libpayload can attach data to the device which it can retrieve when the device is referred to later, for instance in usbdisk_remove. Otherwise, there's no direct connection from the usbdev_t structure to any bookkeeping in the host firmware. Change-Id: I36fe693b0dcd2098e359c26744e376e73bd3a723 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2513 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-02-15libpayload: Use the same type for 32 bit data in readl as in uint32_t.Ronald G. Minnich
The compiler gets mad when the types are equivalent size but not necessarily interchangeable because of strict aliasing checks. Since uint32_t is likely to be used when trying to read 32 bit data, it makes sense for them to be the compatible. Signed-off-by: Gabe Black <gabeblack@google.com> Change-Id: If73d794866055dc026fc06d6268e692adac0f835 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2411 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-02-12libpayload: New CBFS to support multiple firmware media sources.Hung-Te Lin
Upgrade CBFS in libpayload to use new media-based implementation from coreboot ( http://review.coreboot.org/#/c/2182/ ). Old CBFS functions (cbfs_find, cbfs_find_file, get_cbfs_header) are still supported, although the recommended way is to use new CBFS API. To migrate your existing x86 payload source: - Change cbfs_find to cbfs_get_file - Change cbfs_find_file to cbfs_get_file_content - Prefix every CBFS call with a CBFS_DEFAULT_MEDIA argument. Ex, char *jpeg_data = cbfs_find_file("splash.jpg", CBFS_TYPE_BOOTSPLASH); => char *jpeg_data = cbfs_get_file_content( CBFS_DEFAULT_MEDIA, "splash.jpg", CBFS_TYPE_BOOTSPLASH); The legacy setup_cbfs_from_{ram,flash} is also supported, although the better equivalent is to make a new media instance: struct cbfs_media ram_media; init_cbfs_ram_media(&ram_media, start, size); char *data = cbfs_get_file_content(&ram_media, "myfile", my_type); Verified by being successfully linked with filo. Change-Id: If797bc7e3ba975d7e3be905c59424f7a93b8ce11 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2191 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-01-04Change "VERSION*" to more determined name "CBFS_HEADER_VERSION*".Hung-Te Lin
The 'VERSION' in CBFS header file is confusing and may conflict when being used in libpayload. Change-Id: I24cce0cd73540e38d96f222df0a65414b16f6260 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2098 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-12-14libpayload: add kconfig.hStefan Reinauer
This implements the linux kernel's macros to handle boolean CONFIG_ variables more easily. Change-Id: I595f9db652d019fe72e231111258ec609bec9d4e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2036 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: Initial ARMv7 portStefan Reinauer
This compiles, but it's not tested yet. Change-Id: I2f73a814649aa36c39af3e77cefd8a968671f5c0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2035 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: rename i386 to x86Stefan Reinauer
Change-Id: Ia9170bd3d04e76dbf9321ca7ea4be23b5e468d21 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2033 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-10libpayload: Fix renaming of REG_CLASS_DEV to REG_SUBCLASSNico Huber
REG_CLASS_DEV was renamed to REG_SUBCLASS. Change-Id: I4af476b953b544f680337d815889564f016563eb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1986 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-30Change TARGET_I386 to ARCH_X86David Hendricks
This renames TARGET_I386 to ARCH_X86 to make it more uniform with other parts of the codebase, e.g. cbfs_core.h from cbfstool. Change-Id: I1babcc941245ed1dde0478a21828766759373a42 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1961 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-11-30fix #if for target architecture in libpayloadDavid Hendricks
This bug was introduced when we copied cbfs_core.h from cbfsutil to libpayload. Change-Id: I9b5d00d0dbdb969644ce46ad6ac2a84b366b5cd7 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1958 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins)
2012-11-30Add multi-architecture support to cbfstoolDavid Hendricks
This is an initial re-factoring of CBFS code to enable multiple architectures. To achieve a clean solution, an additional field describing the architecture has to be added to the master header. Hence we also increase the version number in the master header. Change-Id: Icda681673221f8c27efbc46f16c2c5682b16a265 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1944 Tested-by: build bot (Jenkins)
2012-11-23libpayload: Fix some missing-prototype warningsNico Huber
usb_controller_initialize() is not declared in any header file nor called from outside of usbinit.c, so make it static. set_configuration() looks like beeing non-static on purpose (like the other helpers around it in usb.c), so put a prototype into usb.h. Change-Id: I08d93b3769d8398bb43462d9afdfeec81fef93ec Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1894 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-15libpayload: Use #ifdef for CONFIG_* checksNico Huber
Libpayload uses the linux kernel's config style, where CONFIG_* defines don't get written for unset tristates. Change-Id: I3f832cf86bca9a1e153d96af4bf6434a19eba2f6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1847 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-14libpayload: Add init() function to hci_t and rework uhci_reset()Nico Huber
uhci_reset() differs in semantics compared to the other HCI's reset() implementations. uhci_reset() does some initialization work after a controller reset. So move the initialization part to a new function, uhci_reinit(), which get's exported through a new entry in hci_t: hci_t.init(). Warning: This breaks code that relies on the current, special, counterintuitive behaviour of uhci_reset(). If one wants a working host controller after calling hci_t.reset(), he should call hci_t.init() afterwards. Change-Id: Ia7ce80865d12d11157645ce251f77f349f8e3c34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1851 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Document USB host controller setup functionsNico Huber
The semantics of the controller functions, start(), stop(), reset() and shutdown(), are not self-explanatory which let to some confusion. At least the reset() functions of the different host controller drivers were implemented following different interpretations. Let's make the intended behaviour of these functions clear. The stated inconsistencies will be addressed in following commits. Change-Id: Id2e300f65c21039218b6ba3f87c0fcd4f0dda0a8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1848 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Export device count in storage interfacePatrick Georgi
FILO can use this as offset to enumerate AHCI and its own IDE devices together. Change-Id: I57380e7bd1df6db5c882427e9a34d068f4348fb2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1846 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Add CB_ prefixes to some constants in coreboot_tables.h.Gabe Black
This makes their names more consistent with other constants in this header, avoids name collisions, and makes it more obvious where the names came from. Change-Id: I7b8bd4ada0fbaf049f35759a907281265f5bb2e6 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1729 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09libpayload: Change "GPIOs" into flags.Gabe Black
Some constants which were used to interpret the contents of the coreboot tables were moved to the appropriate libpayload header file. The constant which describes the maximum length of a GPIO name was renamed to have a CB_ prefix. That makes it more obvious what sort of GPIO name it describes, and reduces the change of a name collision. It also makes it more consistent with other names in that header, although some other exceptions still exist. Change-Id: I6c0082b3198d34e8a78507fbfac343ee8facf0dc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1728 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09libpayload: Add a function to retrieve the rows and cols of the video console.Gabe Black
This is useful if you need to put some text in a particular place on the screen, for instance in the middle. Change-Id: I3dae6b62ca1917c5020ffa3e8115ea7e8e5c0643 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1734 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Separate video initialization and the video console.Gabe Black
It's possible to want to display text on the display without using it as a console. This change separates the initialization of the video code from setting up the video console by pulling out everything but installing the console into a new function called video_init. Change-Id: Ie07654ca13f79489c0e9b3a4998b96f598ab8513 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1733 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09libpayload: Add support for the CBMEM in memory console.Gabe Black
Change-Id: I1489b5306ef1ca078686fed4dba2d242f70ad941 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1727 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Refactor the endianness conversion functions and header files.Gabe Black
The endianness of an architecture is now set up automatically using Kconfig and some common code. The available conversion functions were also expanded to go to or from a particular endianness. Those use the abbreviation le or be for little or big endian. Built for Stumpy and saw coreinfo cbfs support work which uses network byte order. Used the functions which convert to little endian to implement an AHCI driver. The source arch is also little endian, so they were effectively (and successfully) inert. Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Update libpayloads understanding of the coreboot tables.Gabe Black
Give it somewhere to put the new info in sysinfo, and tell it how to parse the new tables which it doesn't yet understand. Change-Id: I01d3318138696e6407553c27c1814f79e3fbc4f8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-07libpayload: Turn the "debug" #define into the usb_debug static inline function.Gabe Black
The "debug" macro used internally in the libpayload USB subsystem was very generically named and would leak into consumers of the library that included usb.h directly or indirectly. This change turns that #define from a macro into a static inline function to move away from the preprocessor, and also renames it to usb_debug so it's less likely to collide with something unrelated. Change-Id: I18717df111aa9671495f8a2a5bdb2c6311fa7acf Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1738 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07libpayload: Add definitions for more config space registers.Gabe Black
Change-Id: I02cf353ce7c955cb11ca11c0d5b8aa630cf15fdb Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1735 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Add the format attribute to functions in stdio.h.Gabe Black
gcc recognizes the format function attribute which tells the compiler to expect the format string to look a certain way and for its arguments to be of appropriate types. This helps to prevent errors like the one that was recently fixed in libpayload's assert. Change-Id: I284ae8bff32f72cfd2d1a250d126c729b38a5730 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1731 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07libpayload: Fix the format string of the assert macro.Gabe Black
The assert macro in libpayload was using a format string which printed the line number with %s. The line number came from the __LINE__ predefined macro which resolves to an integer constant. Change-Id: I0e00d42a1569802137cf440af3061d7f397fdd27 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1730 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-07Update the way serial info is read from the coreboot tables.Gabe Black
This information is now stored in a structure instead of in a few seperate fields. libpayload hadn't been updated to reflect the new layout or to consume the new information intelligently. Change-Id: Ice3486ffcdcdbe1f16f9c84515120c591d8dc882 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1724 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Move the definition of ipchksum into its own header file.Gabe Black
Change-Id: Ifb7c18f9ca566bd50ca138ffd8af951375089537 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1722 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Include stdint.h in libpayload's rdtsc.h.Gabe Black
This file uses uint*_t types but hadn't included stdint.h itself. Change-Id: Ib883f62951bae1ece5134c6bd0f4799a80740e8e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1720 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-10-27libpayload: New AHCI, ATA and ATAPI driversNico Huber
This adds a new interface for storage devices. A driver for ATA and ATAPI drives on AHCI host controllers comes along. The interface is very simple and was designed to match FILO's needs. It consists of three functions: void storage_initialize(void); Initializes controllers. Should be called once at startup. storage_poll_t storage_probe(size_t dev_num); with typedef enum { POLL_NO_DEVICE = -2, POLL_ERROR = -1, POLL_NO_MEDIUM = 0, POLL_MEDIUM_PRESENT = 1, } storage_poll_t; Looks for a drive with number dev_num (drives are counted from zero) and polls for a medium in the drive if appropriate. int storage_read_blocks512(size_t dev_num, u64 start, size_t count, unsigned char *buf); Reads count blocks of 512 bytes from block start of drive dev_num into buf. Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-09-26libpayload: Extend CMOS access libraryPatrick Georgi
libpayload already contained a number of functions for convenient access to CMOS configuration. Add functions to support iteration over available enum fields. Change-Id: If95f45d7223d2e19c42f1d8680c12d23f6890a01 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1538 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-23libpayload: add controller type in usbdev_hcAnton Kochkov
Add controller type (UHCI, OHCI, EHCI or XHCI) into usbdev_hc (hci_t) struct, so now we know which type selected controller have. It needed to access controller specific data, if access usb tree outside of libpayload (e.g. in payload intself) Change-Id: I7df947bbb56a50d0d792ccd4d3a6b021ee95e2ea Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1145 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-22libpayload: Shutdown reasonably if we can't init usb msc deviceNico Huber
This lets the init of usb mass storage return if the device configuration is unusable. Also add some checks for proper shutdown so we don't free/remove an uninitialized device. Change-Id: I6daf9b38e632b6e381bcd5a7717f0f1a3150b64a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: Detach unresponsive usb mass storage devicesNico Huber
This enables logical detachment of unresponsive usb devices (i.e. devices not responding to control transfers) in the usb mass storage driver. Without the detection of unresponsive devices we wait way too long for the device to become ready. Change-Id: I8b8cf327f49dde25afaca4d3066f16ea86b99d3d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1121 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Add support for split transactions in EHCINico Huber
With split transactions, the EHCI host controller can handle full- and low-speed devices on hubs in high-speed mode. This adds support for split transactions for control and bulk transfers. Change-Id: I30fa1ce25757f33b1e6ed34207949c9255f05d49 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1081 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-01libpayload: Add clear_feature() function to USB frameworkNico Huber
This function will be used by the USB hub driver. Change-Id: I4d1d2e94f4442cbb636ae989e8ffd543181c4357 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1079 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-17libpayload: enforce const correctness for CMOS getter/setterMathias Krause
Input only arguments to {get,set}_option*() should be const to catch programming errors early. Change-Id: I560001a8e9226dfd156a4e529fcad20549236ebd Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/652 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-03libpayload: Add iterators for CMOS variablesPatrick Georgi
Provide functions that pick the first CMOS variable defined in the cmos layout, and from there, the next one. Change-Id: Ie98146de7f6273089fc6fc0b232a4b94337cf8a3 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/587 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-03libpayload: Expose options_checksum_validPatrick Georgi
options_checksum_valid can be used as a fast test to identify invalid CMOS data by checking the checksum. Change-Id: I44635d4c5d389579ad82435907ba8658e1bd44bb Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/586 Reviewed-by: Bernhard Urban <lewurm@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-03libpayload: Provide interpretation of CMOS data structuresPatrick Georgi
Add new functions that allow using string based key/value access to CMOS, including support for enums. Change-Id: Ibe238eff4c5230e5f61004c88221cd34393873aa Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/585 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02libpayload: Add access to CMOS images in memory spacePatrick Georgi
Provide access to CMOS images in RAM or CBFS, such as cmos.defaults Change-Id: Ifa70dea6206d94c0c271caf9ae1152fc76b5d51a Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/584 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02libpayload: Refactor highlevel CMOS accessPatrick Georgi
This will allow using libpayload functions to access CMOS data in template files in RAM or CBFS. Change-Id: I323ed625e657cbdc1fae8c279a82ee578e83ad00 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/583 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-26libpayload: Allow using CBFS functions on images in RAMPatrick Georgi
Two new functions allow switching the CBFS functions from using RAM or ROM, with ROM as default. Change-Id: I04d67ad622d25c5728ae9a63f5b8a3dc9bbacce6 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/550 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-07Cleanup access to vendor/part # infoPhilip Prindeville
Instead of macros to access MAINBOARD record, use convenience functions. Store pointers to MAINBOARD and HEADER for use outside of CB code. Change-Id: I074e3a0df7d25726cbd942538bfdc5a63dd17e12 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/502 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Let lib_get_sysinfo() pass through the success of get_coreboot_info()Philip Prindeville
The return status of get_coreboot_info() might be handy to a platform driver calling lib_get_sysinfo() to test for the presence of coreboot. Change-Id: I0176c93ee92c9dff733112026ee50f2ca797bdff Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/503 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Fix missing cast back to void *Philip Prindeville
MEM_RANGE_PTR() also needs to return a pointer to untyped memory. Change-Id: I0ec64ad7bdb136d5e1a999bff3df6fa66eb29bf1 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/500 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Use convenience function to checksumPhilip Prindeville
That coreboot uses the IP checksum is an artifact, not a deliberate requirement to be compatible with the Internet Protocole suite. Use a wrapper to abstract the computation of coreboot's checksum. Change-Id: I6491b9ba5efb9ffe5cb12a6172653a6ac80a1370 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/497 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Replace UNPACK_CB64 macro with inlinePhilip Prindeville
Having submitted a module based on coreboot to LKML for acceptance, it was requested that fewer macros and more inlines be used (because of their superior type-checking when performing pointer casts, etc). This is the first of several changes to make the relevant parts of coreboot comply to linux code standards. Change-Id: Iffe7061fa62fa639e0cb6ccb9125eb3403d06b1a Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/495 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-13libpayload: add set_option() functionPatrick Georgi
It allows to change CMOS values from payloads Change-Id: I4872fc27476923adafe13504126235b92b30de85 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/445 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-04libpayload: Implement usb_exitPatrick Georgi
So far it was empty and never published. It now exists and shuts down all controllers (esp. EHCI which resets the port routers). Change-Id: I81e355e8a05778d6397675417b085a094a6f48ee Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/397 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-04libpayload: Drop usb_fatal()Patrick Georgi
We have fatal(), which is just as good. Coccinelle script: @@ expression E; @@ -usb_fatal(E) +fatal(E) Change-Id: Iabecbcc7d068cc0f82687bf51d89c2626642cd86 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/395 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2011-11-03libpayload: Reduce verbosity in USB stackMathias Krause
The USB stack is pretty noisy. Reduce the output to a sane level. Change-Id: I250949e5cf74a8c6d43822b2e7487143b2ae1c65 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-03libpayload: Put coreboot version into lib_sysinfoMathias Krause
Change-Id: I22319efe90e475c66b9556f734a7a5e54f7c59bc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-01libpayload: remove trailing whitespace and run dos2unixStefan Reinauer
Change-Id: Iffed3602456f5306711c65f06c873c58d4086e11 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/363 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-21Extend coreboot table entry for serial portsStefan Reinauer
Add information about memory mapped/io mapped base addresses. and fix up libpayload to use the same structures Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I5f7b5eda6063261b9acb7a46310172d4a5471dfb Reviewed-on: http://review.coreboot.org/261 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-14libpayload: Add get_option_from()Patrick Georgi
This function allows reading the nvram configuration table from locations other than the cbtable. Change-Id: I56c9973a9ea45ad7bf0185b70d11c9ce5d0e0e1b Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/213 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-18libpayload: export get_cbfs_header()Patrick Georgi
Keep in sync with coreboot's version. Change-Id: I8a253446bd3b2ce9d05c6076a3f49f0260ecd5f9 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/158 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-17libpayload: Some more compatibility (for flashrom)Patrick Georgi
libpci defines an arbitrary set of PCI vendor IDs, flashrom uses the Intel definition. Add it. flashrom also requires inttypes.h, so add the OpenBSD version Change-Id: I9bffd8193f635c375ac4d6b6eae8d3d876b95f5f Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/154 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-04libpayload: Add liblzma, libcbfsPatrick Georgi
Add cbfs core from coreboot into libpayload, and to support lzma decode, add coreboot's lzma code, too. Carl-Daniel agreed to relicense the lzmadecode wrapper as BSD-l, solving licensing problems. Change-Id: Id28990fe7e951d99447e265a4880d70a8f208dd2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-04libpayload: Add PDCurses and ncurses' libform/libmenuPatrick Georgi
PDCurses provides an alternative implementation of the curses library standard in addition to tinycurses. Where tinycurses is really tiny, PDCurses is more complete and provides virtually unlimited windows and the full API. The PDCurses code is brought in "vanilla", with all local changes residing in curses/pdcurses-backend/ In addition to a curses library, this change also provides libpanel (as part of the PDCurses code), and libform and libmenu which were derived from ncurses-5.9. As they rely on ncurses internals (and PDCurses is not ncurses), more changes were required for these libraries to work. The build system is extended to install the right set of header files depending on the selected curses implementation. Change-Id: I9e5b920f94b6510da01da2f656196a993170d1c5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/106 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-20libpayload: Provide dummy getenv()Patrick Georgi
Change-Id: I419fcb16e0b10dee9195072e0e6befa6c9e61a69 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/105 Tested-by: build bot (Jenkins) Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-16libpayload: Improve compatibilityPatrick Georgi
Define INT_MAX, EOF and make sure size_t is available. Change-Id: I1b4b717d2545ea8312ec52339300307a5bd68f8a Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/104 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-11libpayload: Add qsort()Patrick Georgi
It's taken from OpenBSD and thus appropriately licensed (and reasonably tested). Change-Id: I5767600c9865d39e56c220b52e045f3501875b98 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/88 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-07libpayload: Don't declare mouse support in tinycursesPatrick Georgi
Change-Id: Id1ff3d85617e3ec063ce332cf13920dfbbb7cf26 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/87 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-07libpayload: Provide atol(), malloc.hPatrick Georgi
Change-Id: I807ca061115146a6851eef481eb881b279fba8e1 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/86 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-07libpayload: Implement strlcpyPatrick Georgi
Change-Id: Ibd339957690afe2cded46895c3088eba87f0ffd1 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/85 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-30Reduce warnings/errors in libpayload when using picky compiler optionsPatrick Georgi
The new build system uses quite a few more -W flags for the compiler by default than the old one. And that's for the better. Change-Id: Ia8e3d28fb35c56760c2bd0983046c7067e8c5dd6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/72 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-04-16Allow libpayload to use an OXPCIe 952 card on systems without ↵Stefan Reinauer
onboard serial port Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6508 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01libpayload: Add more libpci-compatibility (#defines)Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6417 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01libpayload: Implement pci_cleanup()Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6416 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01libpayload: Implement ffs()Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6415 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Some more standard types and defines (libpayload)Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6414 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24libpayload: Move stdin/stdout/stderr away from headersPatrick Georgi
Otherwise they exist in several object files, confusing the linker Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6377 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Use fprintf(stderr, ...) in libraryPatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6359 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Stub out FILE*, stdout/stdin/stderr and implement fprintf on thesePatrick Georgi
- Add FILE* - Add stdout, stdin, stderr stubs - Add fprintf that redirects to printf for stdout and stderr and fails otherwise Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6358 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Some more POSIX compatibilityPatrick Georgi
- Add assert.h - Add arpa/inet.h - Add assert macro Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6356 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Printing coreboot debug messages on VGA console is pretty much useless, sinceStefan Reinauer
initializing VGA happens pretty much as the last thing before starting the payload. Hence, drop VGA console support, as we did in coreboot v3. - Drop VGA and BTEXT console support. Console is meant to be debugging only, and by the time graphics comes up 99% of the risky stuff has already happened. Note: This patch does not remove hardware init but only the actual output functionality. The ragexl driver needs some extra love, but that's for another day - factor out die() and post() - drop some leftover RAMBASE < 0x100000 checks. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: QingPei Wang<wangqingpei@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17libpayload: Add function to fix CMOS checksum.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-16Add #define that states the libpci interface version we implementPatrick Georgi
(flashrom needs it) Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5699 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-09become more standard with libpayload headers. PATH_MAX belongs in limits.h,Stefan Reinauer
tiny curses can use standard includes now. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5664 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-24Incomplete implementation of libpci's (of pciutils) interface.Patrick Georgi
No pciutils code was harmed in its production - this code was written by looking at flashrom's expectations, so there's no license pollution. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5645 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-24Attached patch moves functions out of the huge libpayload.h into headersPatrick Georgi
according to libc/posix traditions, to simplify porting applications to payloads. It also adds a couple of functions: strcasecmp, strncasecmp, strcat, strtol, strspn, strcspn, strtok_r, strtok, perror, exit, getpagesize Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5643 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-07Avoid using the name "pid_t", which is used on unixoid systems.Patrick Georgi
Move controller specific data structures into private headers, to avoid conflicts between controller drivers. Factor out the USB PID ids, which are only exposed on UHCI. It's of not much use on the other controllers. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5616 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25USB updates from our internal treeStefan Reinauer
- support MMC2 devices - make usb stack more solid - drop some unused functions - fix lowspeed/speed naming - add support for "quirks" - improve usbhid driver Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5299 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25libpayload updateStefan Reinauer
* rework Config.in * add string_to_args function to actually make getopt usable. * add strchr * add strlcat * some malloc fixes (exposed by the USB stack) * add malloc debugging (thanks to Matthias Krause from Secunet!) * make LAR support optional, it's not really used anymore * (define htoX macros for ppc) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5298 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25Add coreboot framebuffer support to libpayloadStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5295 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25make keyboard reset driver generic (not pc keyboard driver dependent)Stefan Reinauer
so it can be used by usb, too Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5291 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-31Catch various cases in libpayload where malloc() or memalign() return NULLStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4474 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-31* drop duplicate prototype for lib_get_sysinfo()Stefan Reinauer
* fix delay handling in tiny curses keyboard driver * fix off by one error in video driver Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4473 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-21This change adds PPC support to libpayload, and hooks it up in the buildPatrick Georgi
process. The PPC support is still stubbed, with commented out x86 code as guide line for an implementor. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4293 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 09:39:24 +0000