summaryrefslogtreecommitdiff
path: root/payloads/libpayload/drivers
AgeCommit message (Collapse)Author
2015-04-14libpayload dwc2: use bus addresses for buffersIonela Voinescu
The address of the output buffer sent to the device should be the bus address and not the virtual address. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA and bring up board; USB works properly after this change BRANCH=none Change-Id: I5c9d199e17c3f4303095ad73f4980d32d04c6118 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 942c385c112c2a4e409da806548081d3e2f8f438 Original-Change-Id: I0c06196501a968a72cb3f2c7dd1027bb22cdaada Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245387 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9455 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14libpayload dwc2: Use a new FIFO allocation methodhuang lin
Total FIFO length is split into 512 byte blocks. Allocate these blocks to GRXFSIZ and GNPTXFSZ evenly. This method avoids hardcoding and makes the FIFO size value work for dwc2 controllers that have a different FIFO ram size. BUG=chrome-os-partner:32634 BRANCH=None TEST=Boot kernel from USB Change-Id: I78ce0fa4c4600fb56c991874a93bdd6674e648c2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5645a25e95f84359cd10fc9fcf56e1f73fd6ce87 Original-Change-Id: Ib50a08c193f7f65392810ca3528a97554f2c3999 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233119 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9454 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14libpayload: Add dwc2 usb driverhuang lin
BUG=chrome-os-partner:29778 TEST=emerge-veyron libpayload Change-Id: I33f312a939e600b8f4e50a092bb61c5d6bc6d741 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 39ffe53336a2a3b2baa067cdd3dccca5ae93f68e Original-Change-Id: Idad1ad165fd44df635a0cb13bfec6fada1378bc8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/211053 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9453 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10serial: Combine Tegra and Rockchip UARTs to generic 8250_mmio32Julius Werner
We have two drivers for a 100%-identical peripheral right now, mostly because we couldn't come up with a good common name for it back when we checked it in. That seems like a pretty silly reason in the long run. Both Tegra and Rockchip SoCs contain UARTs that use the common 8250 register interface (at least for the very basic byte-per-byte transmit and receive parts we care about), memory-mapped with a 32-bit register stride. This patch combines them to a single 8250_mmio32 driver (which also fixes a problem when booting Rockchip without serial enabled, since that driver forgot to check for serial initialization when registering its console drivers). The register accesses are done using readl/writel (as Rockchip did before), since the registers are documented as 32-bit length (with top 24 bits RAZ/WI), although the Tegra SoC doesn't enforce APB accesses to have the full word length. Also fixed checkpatch stuff. A day may come when we can also merge this driver into the (completely different, with more complicated features and #ifdefs) 8250 driver for x86 (which has MMIO support for 8-bit register stride only), both here and in coreboot. But it is not this day. This day I just want to get rid of a 99% identical file without expending too much effort. BUG=None TEST=Booted on Veyron_Pinky and Nyan_Blaze with and without serial enabled, both worked fine (although Veyron has another kernel issue). Change-Id: I85c004a75cc5aa7cb40098002d3e00a62c1c5f2d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e7959c19356d2922aa414866016540ad9ee2ffa8 Original-Change-Id: Ib84d00f52ff2c48398c75f77f6a245e658ffdeb9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/225102 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9387 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-09libpayload: PCI bus scan - Eliminate endless loopLee Leahy
Don't attempt to scan the PCI bus if the bridge is disabled. When the PCI bridge is not setup and enabled, it is possible for the secondary bus register to contain the value zero (0). In this case the usb_scan_pci_bus routine gets into an infinite recursive loop which ends only when the heap or stack is exhausted. This patch verifies that the PCI bridge is enabled by verifying that it is enabled for either memory or I/O operations. When enabled, the secondary bus is scanned. BRANCH=none BUG=None TEST=Build and run on Samus Change-Id: I6826dc1d73b7c24729de5ac7c4d3534922ca73c5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 63d04b47934761351b54c847a2692bdef81ce54f Original-Change-Id: I855240c52fa3eba841e6754816ebbcb824abc4cd Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236382 Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/8734 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-08libpayload: Add drivers for bg4cdDaisuke Nojiri
BUG=chrome-os-partner:32772 BRANCH=none TEST=Built chromeos-bootimage Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I15cb40532855c89f6fb959652a7e874897eb45bb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f8419fe22cf39d827e566b8f4dbe0680e4106a1 Original-Change-Id: I97f2ac8ffc7232c7a6c6d40deb8a35630d3d62a7 Original-Reviewed-on: https://chromium-review.googlesource.com/222662 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9360 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23libpayload: usb: xhci: set ENT flag in last Normal TRBSourabh Banerjee
If a TD is comprised of one or more Normal TRBs and terminated with an Event Data TRB, then the transition to the Idle state (and associated Stream state save) could occur after all the data for the TD has been moved (e.g. after Transfer Event TRBs have been executed), but before the Event Data TRB is executed. Under these conditions, the execution of the Event Data TRB is necessary to complete the TD, otherwise it does not occur until the next time the Stream is scheduled. This could lead to the lock up. The Evaluate Next TRB(ENT) flag provides a means of forcing the execution of a terminating Event Data TRB. Setting ENT flag in last Normal TRB makes the xHC to evaluate the Even Data TRB. BUG=chrome-os-partner:29375 TEST=Verified kernel boot-up on storm from previously failing USB stick. USB stick model: Sandisk Ultra USB 3.0 Pen Drive 32 GB Strontium Jet USB 3.0 Pen Drive 32 GB Change-Id: I092e2109c55c2274239c493cb67b47d730304ed2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7eefb3b2858c841165ae839d349d2a0be50fbcc8 Original-Change-Id: I4e123577ec5a5996d87d2fc52cb6cf5c571c9fae Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/220123 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/8736 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-23libpayload: EHCI: Support root-hub TT featureJim Lin
If EHCI controller has TT (Transaction Translator) support in root-hub, then we need to keep control over this controller when USB keyboard (low-speed device) is connected to root-hub port. Need to add "CONFIG_LP_USB_EHCI_HOSTPC_ROOT_HUB_TT=y" to config file (e.g. payloads/libpayload/configs/config.nyan_big) to support this feature. BUG=chrome-os-partner:32355 TEST=Tested on nyan_big platform. Press ESC+REFRESH+POWER keys on internal keyboard to power up. Press Left Arrow or Right Arrow on USB keyboard to switch between "English" and "Default Locale" in coreboot UI. Or unplug and plug in device and try again. Root hub <- low-speed USB keyboard Root hub <- full-speed hub <- low-speed USB keyboard Root hub <- high-speed hub <- low-speed USB keyboard Change-Id: Iaa2823f64c8769fc808ee7a316c378f18f004e63 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4ad57fd673d6dc8814fe99a4ac420566bb17e77b Original-Change-Id: Id86a289bc587653b85227c1d50f7a4f476f37983 Original-Signed-off-by: Jim Lin <jilin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/220125 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/8737 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-21libpayload: pistachio: fix timer implementationIonela Voinescu
timer_raw_value must return the number of CPU ticks, and not the time obtained by dividing the ticks by the CPU frequency. The CPU counter is increased at every 2 CPU clocks and therfore the number of ticks will be the counter value multiplied by 2. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA; it works properly. BRANCH=none Change-Id: Iae62cb328e882f84822250bdf72146321ca9bbe0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7ab25ce7dcaffb453ee774d870963a56444d46af Original-Change-Id: I74408950900463a2c054d5aebd3edb005a325adb Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/242393 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/8744 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-21libpayload: arch/mips: Add basic MIPS architecture supportIonela Voinescu
Add the basic build infrastructure and architectural support required to build for targets using the MIPS architecture. This will require the addition of cache maintenance. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA with Depthcharge as payload; successfully executed payload. BRANCH=none Change-Id: I75cfd0536860b6d84b53a567940fe6668d9b2cbb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 758c8cb9a6846e6ca32be409ec5f7a888ac9c888 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Change-Id: I0b9af983bf5032335a519ce2510a0b3aca082edf Original-Reviewed-on: https://chromium-review.googlesource.com/219740 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8741 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-21libpayload ehci: Use 64-byte aligned data structures for periodic transfersJim Lin
Chapter 3.1 "Periodic Frame List" of EHCI 1.0 specification says "Frame List Link pointers always reference memory objects that are 32-byte aligned." jwerner@chromium.org suggests setting it to be 64-byte aligned for consistency with other EHCI queue structures. BUG=chrome-os-partner:31993 TEST=Tested on nyan platform. Before adding patch, USB keyboard behind an external hub is not working to switch between "Default Locale" and "English" (after pressing ESC+REFRESH+POWER on embedded keyboard and later Left/Right-Arrow key on USB keyboard). Change-Id: Ie6259f2df20ae2618c2074e831fad087f227091d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 23fc02e6ba3b17be4eaf18810ec6fc0d9c0e0b9a Original-Change-Id: If52ddc43ebd5d509c19f104928dced5bd09b1706 Original-Signed-off-by: Jim Lin <jilin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/218403 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/8738 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-21libpayload: EHCI: Fix transaction error for interrupt transferJim Lin
Data toggle should be running like 0, 1, 0, 1, ... In the failed case (where a low-speed USB keyboard or km232 device is installed), data toggle will be running as 0, 1, 0, 1, ..., 1, 1. Therefore causing Halted or Transaction Error bit to be set in qTD Status field. BUG=None BRANCH=None TEST=Tested on nyan_kitty platform, firmware-kitty-5771.61.B branch. Attached USB keyboard or km232 device to root-hub port (same side as SD card slot). Made sure no transaction error after doing interrupt transfer. Change-Id: I576f3c583dae4c279a6e0e8ffdfce5abe463277d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 64b0428aaab869e20f6720669e953acf82ecb846 Original-Change-Id: Ic2c0f95cff2ae6e314967b0b82231a962255f1a7 Original-Signed-off-by: Jim Lin <jilin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233857 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/8747 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-19libpayload/usb: wait a millisecond to work around device bugsPatrick Georgi
Some USB sticks seem to send a NAK at a place where they mustn't by spec, leading to a controller side error condition. To avoid it, wait a millisecond which is enough to get past the NAK condition. That delay only happens on device discovery so it won't affect boot time by more than 1ms per device. BUG=chromium:414959 BRANCH=none TEST=depthcharge recognizes a Lexar 16GB USB stick after applying this change. Change-Id: I0e385702a5259b16fda0a253fc121d8f66e6705c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 10bbfda8395af009e7f910cc503f50c2ad969ae8 Original-Change-Id: I6dd5ca34e9f3767003ccb0ca9daaf16116f4a2df Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228791 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Sheng-liang Song <ssl@chromium.org> Reviewed-on: http://review.coreboot.org/8735 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-03-19libpayload EHCI: Add memory barrier to EHCI driverFurquan Shaikh
EHCI driver accesses mmio space using regular struct pointers. In order to avoid any CPU re-ordering, memory barrier is required in async_set_schedule, especially for arm64. Without the memory barrier, there seems to be re-ordering taking place which leads to USB errors with some flash drives as well as transfer errors in netboot. BUG=chrome-os-partner:31533 BRANCH=None TEST=With the memory barrier introduced, netboot for ryu completes transfer without any error and finishes within 6-7 seconds. Change-Id: Ib6d29dc79fd5722c27284478e8da316929e86bff Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 561bdd746c4d4446ce0a6d21337d354625d85ddc Original-Change-Id: Ic05d47422312a1cddbebe3180f4f159853604440 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/213917 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/8732 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-13libpayload: ipq808x: stale interrupt shall not be cleared unconditionallyYogesh Lal
The serial driver hangs in cases when FIFO has more than single word to be processed. Easiest way to reproduce is to paste a string of greater than 4 characters in cli. Clearing the RXSTALE interrupt without draining all the characters from FIFO leads to the issue as the driver is dependent on msm_boot_uart_dm_read function to reinitialize for next transfer. Logically the driver is organized in such a manner that next transfer never gets initiated till rx_data_read < total_rx_data. Clearing the RXSTALE without consideration of total number of characters (or words) unprocessed makes the msm_boot_uart_dm_read to return on the first if conditional. Thus the driver is stuck forever. A quick fix is to avoid clearing the stale interrupt. Reset is handled whenever a new transfer is initialized in msm_boot_uart_dm_init_rx_transfer. BUG=chrome-os-partner:29542 TEST=manual -Paste a string greater than 4 characters in cli. Original-Change-Id: I016afb01a77cd14764f0176f6bf144fb29796c2f Original-Signed-off-by: Yogesh Lal <ylal@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/209512 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 61528884ad2c0a8e146054bbfeb01a3bc73b9692) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I936af5daa52a25f62133bdf9fb44f0b68cf34e88 Reviewed-on: http://review.coreboot.org/8667 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-04libpayload: Don't try to free individual xhci device slotsPatrick Georgi
`di` points to a single item in xhci->dev[], which is malloc'd collectively. Trying to free() leads to pain. Change-Id: Ibd99eda905d43cbf2d2c111dfd0186ed6b119329 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: Coverity Scan Reviewed-on: http://review.coreboot.org/8515 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-02-23libpayload: Improve sanity checking in UHCI driverPatrick Georgi
Test for devno != -1 before trying to access array[devno] (which may be array[-1]). Change-Id: Ia69cc7eba0335f02bb0efec003a320a3c0646acb Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: Coverity Scan Reviewed-on: http://review.coreboot.org/8509 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-02-23libpayload: avoid use-after-free in OHCI driverPatrick Georgi
Change-Id: I89294c22c57564262e53e36c5ae9ac6eb0ed934a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: Coverity Scan Reviewed-on: http://review.coreboot.org/8510 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-12libpayload: Add Rock Chip drivershuang lin
Add support: 1)Support driver rktimer 2)Support driver rkserial BUG=chrome-os-partner:29778 TEST=emerge-veyron libpayload Original-Change-Id: I2cccedf3b62883dd372842a7972e93f2ebbfb282 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/206184 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> (cherry picked from commit 387450d7c36b201bd177d46eb9f1d280fc043aab) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia6b7a8ee2439a6f2bf7577df822d3f4f3a1e441c Reviewed-on: http://review.coreboot.org/8127 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-01-09libpayload: Fix baseaddr access in serial/tegra.cFurquan Shaikh
Fix baseaddr typecast to allow use in 32- and 64-bit systems BUG=None BRANCH=None TEST=Compiles successfully for rush Original-Change-Id: Ie5ded744d75a0ae4d1428d04ff2478bdfe54d146 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/204424 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit b56814fe5fc7d3a2fdfb324d4baafb27a9d3ffd6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icedc1c819e39b92a0dd92e98f848e15b3039dfbe Reviewed-on: http://review.coreboot.org/8123 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-06libpayload: ipq808x: introduce uart driverVadim Bendebury
This adds a UART driver for the ipq8064 controller. It still does not quite work in the receive direction - the receive FIFO returns read data in 32 bit chunks, which means that 4 keys need to be pressed before a character pops out of the driver (and it reports it as a single character). This issue is being addressed separately, the driver is being checked in to facilitate concurrent development. BUG=chrome-os-partner:27784, chrome-os-partner:29313 TEST=with deptcharge modifications in place, the AP148 board comes up to the depthcharge prompt: Starting depthcharge on storm... Original-Change-Id: Ief2cfcca73494be5c4147881144470078adcefb8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202045 Original-Reviewed-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 4499318fb9a4e663c504d7c41380ccf2aa89da29) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3e07d7568c20c0e570222971ff219de3a6d9b7cc Reviewed-on: http://review.coreboot.org/8061 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04ipq8064: Add work around for slow timer clockVadim Bendebury
Libpayload libc requires timer clock frequency to be at least 1MHz. Ipq8064 code presently provides a single option of 32kHz. Pretend to be running at 1 MHz without additional accuracy. This is a hack which will be reverted as soon as the SOC is configured to supply a faster running clock. BUG=chrome-os-partner:27784, chrome-os-partner:28880 TEST=with other changes depthcharge boots to the CLI console Original-Change-Id: I80ec6652bc5693a549668cd6e824e9cf5c26b182 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201342 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 466a59967b13986099106f8b44924648c1e6e6cd) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I113689191db70710e7a45ccd02d672f482343e35 Reviewed-on: http://review.coreboot.org/8004 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-04libpayload: ipq8064: Add rudimentary timer driverVadim Bendebury
This is still using the 32kHz timer coreboot uses. A finer granularity timer implementation for 806x is in the works. BUG=chrome-os-partner:27784,chrome-os-partner:28880 TEST=none yet. Original-Change-Id: Iae206749000d45040090df48199c8d86d76bbae5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198021 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 8f49f752ab8f84b7c5dc189238732360e8d2aae2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia150c974e5b66939de0b007cf7c1308c187f3289 Reviewed-on: http://review.coreboot.org/8002 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-03libpayload: don't test for unsigned >= 0Patrick Georgi
Change-Id: Ibeaf6de9505bc6f1e7358a4cfc80228dff7ddb69 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: Coverity Scan Reviewed-on: http://review.coreboot.org/7978 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-03libpayload: avoid memory overflowsPatrick Georgi
With commands typically shorter than the buffer they're copied to, copy cmdlen bytes, cut off by the buffer limit. Change-Id: Ia9d2663bd145eff4538084ac1ef8850cfbcea924 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: Coverity Scan Reviewed-on: http://review.coreboot.org/7977 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-31libpayload: Fix pointer related castsFurquan Shaikh
Fix pointer related casts since this can create a problem for 64-bit systems. BUG=None BRANCH=None TEST=Compiled successfully for link, nyan using emerge-* libpayload Original-Change-Id: I4cbd2d9f1efaaac87c3eba69204337fd6893ed66 Original-Reviewed-on: https://chromium-review.googlesource.com/199564 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 914b118a64b0691aeca463dff24252db9c24109e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I11f070ed5d3eddd8b9be30c428cb24c8439e617b Reviewed-on: http://review.coreboot.org/7905 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-31libpayload: usb: xhci: Fix TD size if it overflows 5 bitsRajmohan Mani
xHCI Spec says TD Size (5 bits) field shall be forced to 31, if the number of packets to be scheduled is greater than 31. BUG=chrome-os-partner:27837 BRANCH=rambi,nyan TEST=Manual: Ensure recovery boot with USB 2.0 media on Squawks works fine without any babble errors. Original-Change-Id: Iff14000e2a0ca1b28c49d0da921dbb2a350a1bbd Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Original-Originally-Reviewed-on: https://chromium-review.googlesource.com/202297 Original-Reviewed-on: https://chromium-review.googlesource.com/202330 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Tested-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit ae58b99370df3a86bf15d84b97db858a968b1dbd) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9668b947f676c109fad9297e5efde91bf7f796fd Reviewed-on: http://review.coreboot.org/7913 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-30libpayload: video: Check for 'console' pointer before dereferencing itJulius Werner
Seems that the 'if (cursor_enabled)' check in video_console_fixup_cursor() that was removed in chromium.org 1f880bca0 really meant to check for 'if (console)'. Looks like the whole video console driver is built extra robust to not fail no matter how screwed up the console is, so let's add this missing check here as well. Also fixed up a few other missing 'if (!console)' checks while I'm at it. However, what payloads should really be doing is check the return value of video_(console_)init() and not call the other video functions if that failed. This also adapts video_console_init() to correctly pass through the return value for that purpose (something that seems to have been overlooked in the dd9e4e58 refactoring). BUG=chrome-os-partner:28494 TEST=None. I don't know what Dave did to trigger this in the first place, but it's pretty straight-forward. Original-Change-Id: I1b9f09d49dc70dacf20621b19e081c754d4814f7 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200688 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 3f01d1dc0974774f0b3ba5fc4e069978f266f2fc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I98c1d8360539b457e6df07cbcf799acaf6c4631b Reviewed-on: http://review.coreboot.org/7910 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-30libpayload: Clean up USB build warningsMarc Jones
There were a few build warnings in the USB driver to clean up before -Werror may be enabled. Change-Id: I220cfcf0ee926912a184a91d3ced3ba61259130e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7921 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-30libpayload: video: Make cursor fixup independent of visibilityJulius Werner
The video console runs a video_console_fixup_cursor() function after every printed character to make sure the cursor is still in the output window and avoid overflows. For some crazy reason, this function does not run when cursor_enabled is false... however, that variable is only about cursor *visibility*, and it's imperative that we still do proper bounds checking for our output even if the cursor itself doesn't get displayed (otherwise we can end up overwriting malloc cookies that cause a panic on the next free() and other fun things like that). In fact, there seems to be no reason at all to even keep track of the cursor visibility state in the generic video console framework (the specific backends already do it, too), so let's remove that code entirely. Also set the default cursor visibilty in the corebootfb backend to 0 since that's consistent with what the other backends do. BUG=None TEST=Turn on video console on Big, generate enough output to make it scroll, make sure it does not crash. Original-Change-Id: I1201a5bccb4711b6ecfc4cf47a8ace16331501b4 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196323 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 1f880bca06ed0a3f2c75abab399d32a2e51ed10e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6c67a9efb00d96fcd67f7bc1ab55a23e78fc479e Reviewed-on: http://review.coreboot.org/7908 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-30libpayload: usbmsc: Implement limited LUN supportJulius Werner
I always thought the support for multiple logical SCSI units in the USB mass storage class was a dead feature. Turns out that it's actually used by SD card readers that provide multiple slots (e.g. one regular sized and one micro-SD). Implementing perfect support for that would require a major redesign of the whole MSC stack, since the one device -> one disk assumption is deeply embedded in our data structures. Instead, this patch implements a poor man's LUN support that will just cycle through all available LUNs (in multiple calls to usb_msc_poll()) until it finds a connected device. This should be reasonable enough to allow these card readers to be usable while only requiring superficial changes. Also removes the unused 'protocol' attribute of usb_msc_inst_t. BRANCH=rambi?,nyan BUG=chrome-os-partner:28437 TEST=Alternatively plug an SD or micro-SD card (or both) into my card reader, confirm that one of them is correctly detected at all times. Original-Change-Id: I3df4ca88afe2dcf7928b823aa2a73c2b0f599cf2 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198101 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 960534a20e4334772c29355bb0d310b3f41b31ee) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I39909fc96e32c9a5d76651d91c2b5c16c89ace9e Reviewed-on: http://review.coreboot.org/7904 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-30libpayload: usbmsc: Set correct allocation length for REQUEST SENSEJulius Werner
So I was debugging this faulty USB SD card reader that would just fail it's REQUEST SENSE response for some reason (sending the CSW immediately without the data), cursing those damn device vendors for building non-compliant crap like I always do... when I noticed that we do not actually set the Allocation Length field in our REQUEST SENSE command block at all! We set a length in the CBW, but the SCSI command still has its own length field and the SCSI spec specifically says that the device has to return the exact amount of bytes listed there (even if it's 0). I don't know what's more suprising: that we had such a blatant bug in this stack for so long, or that this card reader is really the first device to actually be spec compliant in that regard. This patch fixes the bug and changes the command block structures to be a little easier to read (why that field was called 'lun' before is beyond me... LUN is a transport level thing and should never appear in the command block at all, for any command). It also fixes a memcpy() in wrap_cbw() to avoid a read buffer overflow that might expose stack frame data to the device. BRANCH=rambi?,nyan BUG=chrome-os-partner:28437 TEST=The card reader works now (for it's first LUN at least). Original-Change-Id: I86fdcae2ea4d2e2939e3676d31d8b6a4e797873b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198100 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 88943d9715994a14c50e74170f2453cceca0983b) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3097c223248c07c866a33d4ab8f3db1a7082a815 Reviewed-on: http://review.coreboot.org/7903 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-22libpayload: usb: Try to avoid reusing device addressesJulius Werner
We recently changed the USB stack to detach devices aggressively that we don't intend to use. This alone is not really a problem, but it exarcerbates the fact that our device detachment itself is not very good. We destroy any local info about the device, but we don't properly disable the offending port. The device keeps thinking that it's active, and if we later try to reuse that device address for another device things become confused. The real fix would be to properly disable all ports that we don't intend to use. Unfortunately, this isn't really possible in our current device/hub polymorphism structure, and I don't want to hack a new disable_port() callback into usbdev_t that really doesn't belong there. We will only be able to fix this cleanly after we ported all root hubs to the generic_hub interface. Until then, an easy workaround is to just avoid reusing addresses as long as possible. This is firmware, so the chance that we'll ever run through 127 devices is really small in practice. Even if we ever fix the underlying issue, it's probably a smart precaution to keep. BRANCH=nyan,rambi BUG=chrome-os-partner:28328 TEST=Boot from a hub that has an "unknown" device in an earlier port than the stick you want to boot from, make sure you can still boot. Original-Change-Id: I9b522dd8cbcd441e8c3b8781fcecd2effa0f23ee Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197420 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 28b48aa69b55a983226edf2ea616f33cd4b959e2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id4c5c92e75d6b5a7e8f0ee3e396c69c4efd13176 Reviewed-on: http://review.coreboot.org/7881 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-22libpayload: console: Allow output drivers to print whole strings at onceJulius Werner
The console output driver framework in libpayload is currently built on the putchar primitive, meaning that every driver's function gets called one character at a time. This becomes an issue when we add drivers that could output multiple characters at a time, but have a high constant overhead per invocation (such as the planned GDB stub, which needs to wrap a special frame around output strings and wait for an acknowledgement from the server). This patch adds a new 'write' function pointer to the console_output_driver structure as an alternative to 'putchar'. Output drivers need to provide at least one of the two ('write' is preferred if available). The CBMEM console driver is ported as a proof of concept (since it's our most performace-critical driver and should in theory benefit the most from less function pointer invocations, although it's probably still negligible compared to the big sprawling mess that is printf()). Even with this fix, the problem remains that printf() was written with the putchar primitive in mind. Even though normal text already contains an optimization to allow multiple characters at a time, almost all formatting directives cause their output (including things like padding whitespace) to be putchar()ed one character at a time. Therefore, this patch reworks parts of the output code (especially number printing) to all but remove that inefficiency (directives still invoke an extra write() call, but at least not one per character). Since I'm touching printf() core code anyway, I also tried to salvage what I could from that weird, broken "return negative on error" code path (not that any of our current output drivers can trigger it anyway). A final consequence of this patch is that the responsibility to prepend line feeds with carriage returns is moved into the output driver implementations. Doing this only makes sense for drivers with explicit cursor position control (i.e. serial or video), and things like the CBMEM console that appears like a normal file to the system really have no business containing carriage returns (we don't want people to accidentally associate us with Windows, now, do we?). BUG=chrome-os-partner:18390 TEST=Made sure video and CBMEM console still look good, tried printf() with as many weird edge-case strings as I could find and compared serial output as well as sprintf() return value. Original-Change-Id: Ie05ae489332a0103461620f5348774b6d4afd91a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196384 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit ab1ef0c07736fe1aa3e0baaf02d258731e6856c0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I78f5aedf6d0c3665924995cdab691ee0162de404 Reviewed-on: http://review.coreboot.org/7880 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-17libpayload: usb: Detach unused USB devicesShawn Nematbakhsh
If a payload decides not to use a USB device then the device can be detached. This prevents the device from interfering with normal operation on some platforms. Also, it aligns the behavior of usb_generic_init with class-specific init functions such as usb_msc_init, which will detach unsupported devices. BUG=None TEST=Manual on Squawks. Test recovery boot w/ USB 2.0 media, verify that media boots and no babble error is encountered. BRANCH=rambi Change-Id: I8fb30951d273e4144cda214a30a2e86df90f2c1c Original-Change-Id: Iee522344558749603defb2966e18765aa195dae2 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/195401 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit f7778ace68c9bee8dfab2b263e5dd054fc50c3bb) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7830 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-13libpayload: Add minimal support for PL011 UARTMarcelo Povoa
This creates a new PL011 config variable which avoids the infinite busy wait on serial_putchar() because the register mapping is not compatible with current implementation. BUG=None BRANCH=none TEST=printf() works on the PL011 based ARMv8 foundation model Original-Change-Id: I9feda35a50a3488fc504d1561444161e0889deda Original-Signed-off-by: Marcelo Povoa <marcelogp@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/187020 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 85779a34a161c324cc8af995ada4393137275f20) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Conflicts: payloads/libpayload/Config.in payloads/libpayload/drivers/serial.c Change-Id: I23c8b3728cd7d2d7692b3e86a679e061e88f7bb5 Reviewed-on: http://review.coreboot.org/7422 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13libpayload: timer: Move the timer drivers from depthcharge to libpayload.Gabe Black
These drivers are needed right away and never really fit into depthcharge's driver model anyway. CQ-DEPEND=CL:194064 BUG=None TEST=Built and booted nyan, link, and peach_pit and verified that timer values in cbmem were reasonable. Built for nyan_big, nyan_blaze and daisy. BRANCH=None Original-Change-Id: Ia7953cfece57524262a6c7d6537082af7a00f4d6 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194058 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit f30a410f0a248c93bc34f5868af1596bf8ce3cdd) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I782d20f3cd63210a87c712643c7a53753f5ef301 Reviewed-on: http://review.coreboot.org/7225 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-11-13libpayload: usb: Remove automatic clear_stall() calls from transfersJulius Werner
We've recently fixed a problem where an external hard drive would choke due to one too many CLEAR_FEATURE(HALT) commands in the XHCI stack with "libpayload: usb: xhci: Fix STALL endpoint handling". Clearing stall conditions from within the transfer function is wrong in general... this is really something that is host controller agnostic and should be left to the higher-level driver to decide. The mass storage driver (the only one that should really encounter stalls right now) already contains the proper amount of clear_stall() calls... any more than that is redundant and as we found out potentially dangerous. This patch removes automatic clear stalls from UHCI and OHCI drivers as well to make things consistent between host controllers. BUG=chromium:192866 TEST=None. I could borrow the original hard drive from Shawn and compile a Snow to only use the OHCI driver to reproduce/verify this, but alas, I am lazy (and it's really not that important). Original-Change-Id: Ie1e4d4d2d70fa4abf8b4dabd33b10d6d4012048a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193732 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit d46e183f3e7e0b0130becdefa6fd3ef8097df54b) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie8f4ab3db8ec0d9a2d1e91c62967833e59c46700 Reviewed-on: http://review.coreboot.org/7223 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13libpayload: usb: Fix up usb_shutdown() code pathsJulius Werner
This patch combines a few minor fixes and refactoring to the various host controller and root hub drivers to ensure they all do the right thing on a call to usb_exit(). It puts a usb_detach_device(0) call into detach_controller() so that the HCD doesn't need to remember to tear down the root hub itself, and makes sure all root hubs properly detach the subtree of devices connected to their ports first (as generic_hub and by extension XHCI had already been doing). It also fixes up some missing free() calls and replaces most 'ptr = malloc(); if (!ptr) fatal()' idioms with the new x(z)alloc(). BUG=chromium:343415 TEST=Tested EHCI on Big and OHCI, EHCI, and XHCI on Snow. Could not test UHCI (unless anyone volunteers to port coreboot to a ZGB? ;) ), but the changes are really tame. Original-Change-Id: I6eca51ff2685d0946fe4267ad7d3ec48ad7fc510 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193731 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5791b546e5a21a360d0c65888a5b92d5f48f8178) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I00138f0aeceb12ed721f7368c7788c9b6bee227d Reviewed-on: http://review.coreboot.org/7222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-09libpayload: serial: Move the depthcharge serial drivers into libpayload.Gabe Black
These drivers need to be ready right away and never really fit into the depthcharge driver model anyway. CQ-DEPEND=CL:194063 BUG=None TEST=Built and booted on nyan and peach_pit. Built for nyan_big, nyan_blaze, and daisy. BRANCH=None Original-Change-Id: I9570dee53c57d42ef4cd956f66a878ce39a2dc20 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194057 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 26e18f680c93fc990a3d1057c164f19859634a9f) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia2233e2bd821d8de8d2d57a9423aeb74be7efd93 Reviewed-on: http://review.coreboot.org/7224 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-29libpayload: usb: ehci: Honor 10ms reset recovery periodJulius Werner
This patch adds the 10ms TRSTRCY delay between a reset and the following Set Address command that is required by the USB 2.0 specification to the EHCI root hub driver. The generic_hub driver that's used for XHCI and external hubs already included this delay. This is such a glaring violation of the spec that I'm really amazed how many USB 2.0 devices we tested before seemed perfectly fine with responding to a Set Address within 2 microframes of the reset... It also increases the port reset hold delay by one millisecond to avoid an ugly race condition on Tegra SoCs: they decided to time the 50ms themselves instead of relying on the CPU to do it (fair enough), and to automatically transition Port Reset to 0 and Port Enable to 1 after that (bad idea). If the CPU's read-modify-write to clear Port Reset races exactly with the host controller setting Port Enable, we may end up clearing the bit again and going into the companion controller handoff path later on. The added millisecond shouldn't cause any problems for other host controllers and is not a big deal compared to other delays in this code path. BUG=chrome-os-partner:26749 TEST=Run several dozen reboot loops with The USB Stick of Death (TM) (a blue Patriot XT 13fe:5200 with bcdDevice = 1.00), make sure it always gets detected correctly. Original-Change-Id: Idd3329ae6d7e5e1c07a84a5475549b3459836b31 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/189872 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Jim Lin <jilin@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 4deca38e9d79f6373f4418fcaf51a6945232c8b8) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I68a29bfd2e0f30409fbfc330b2575f0f9f61a79d Reviewed-on: http://review.coreboot.org/7221 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-22libpayload: usb: Make OHCI work with ARM systemsJulius Werner
This patch enables the OHCI driver to use DMA memory, which is necessary for ARM systems where DMA devices are not cache coherent. I really only need this to test some later OHCI changes, but it was easy enough... copied almost verbatim from ehci.c. Change-Id: Ia717eef28340bd6182a6782e83bfdd0693cf0db1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/193730 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit e46b6ebc439e86a00e13bf656d60cf6c186a3777) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7010 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-22libpayload: usb: xhci: Fix STALL endpoint handlingShawn Nematbakhsh
- Remove the call to clear_stall in xhci_reset_endpoint because we will call clear_stall from the mass-storage driver. - Remove the xhci_reset_endpoint call from xhci_bulk on STALL since we will reset on the next transfer anyway. - Remove the clear_halt parameter from xhci_bulk since it's now unused. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: I852b87621861109e596ec24b78a8f036d796ff14 Reviewed-on: https://chromium-review.googlesource.com/192866 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit e67e4f0545cbdc074328c83c7edccf9e712cd7be) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7011 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-17libpayload: Fix missed CONFIG_ -> CONFIG_LP_ substitutionsNico Huber
Change-Id: I1c64a9a649398ebe2eda179907c470f99caa9fc3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/7056 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-02libpayload: usb: xhci: Treat port reset as a port status changeShawn Nematbakhsh
If a port is connected before and after an xhci controller reset, the PORTSC CSC bit may not be asserted. Add an additional check in xhci_rh_port_status_changed for the PRC bit so we can correctly handle ports in such a state. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: I2d623aae647ab13711badd7211ab467afdc69548 Reviewed-on: https://chromium-review.googlesource.com/189394 Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit ee7c3ea182b35bb6ce3c62f301c4515714f6e654) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7002 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-10-02libpayload: usb: Remove generic roothub reset port functionShawn Nematbakhsh
The generic roothub reset port function is overly broad and does some things which may be undesirable, such as issuing multiple resets to a port if the reset is deemed to have finished too quickly. Remove the generic function and replace it with a controller-specific function, currently only implemented for xhci. Change-Id: Id46f73ea3341d4d01d2b517c6bf687402022d272 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/189495 Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 54e1da075b0106b0a1f736641fa52c39401d349d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7001 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-10libpayload: usbhid: Fix typo on descriptor parsingJulius Werner
Forgot an asterisk and everything goes to hell. Sorry about that. Change-Id: I6b2503ca3ea0f80d4e4e5d8b8c0e986fec5db2c9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173587 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: David James <davidjames@chromium.org> (cherry picked from commit 2a357560a697b56cc6022a4dd3dda47b33568d83) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6854 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-10libpayload: ehci: Fix byte count in dump_td()Julius Werner
The dump_td() debug function in the EHCI stack incorrectly masks the amount of transferred bytes on output... the actual field is 15 bits wide (30:16). Let's just use the mask constant we already have for all the other code. Change-Id: I28c6f0ec75cc613e38d53b670645d19bf9ffe1b9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174986 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 570077da7f16bbe2204b4a80790e4bd8fe1a2bd7) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6853 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-04libpayload: usb: Refactor USB enumeration to fix SuperSpeed devicesJulius Werner
This patch represents a major overhaul of the USB enumeration code in order to make it cleaner and much more robust to weird or malicious devices. The main improvement is that it correctly parses the USB descriptors even if there are unknown descriptors interspersed within, which is perfectly legal and in particular present on all SuperSpeed devices (due to the SuperSpeed Endpoint Companion Descriptor). In addition, it gets rid of the really whacky and special cased get_descriptor() function, which would read every descriptor twice whether it made sense or not. The new code makes the callers allocate descriptor memory and only read stuff twice when it's really necessary (i.e. the device and configuration descriptors). Finally, it also moves some more responsibilities into the controller-specific set_address() function in order to make sure things are initialized at the same stage for all controllers. In the new model it initializes the device entry (which zeroes the endpoint array), sets up endpoint 0 (including MPS), sets the device address and finally returns the whole usbdev_t structure with that address correctly set. Note that this should make SuperSpeed devices work, but SuperSpeed hubs are a wholly different story and would require a custom hub driver (since the hub descriptor and port status formats are different for USB 3.0 ports, and the whole issue about the same hub showing up as two different devices on two different ports might present additional challenges). The stack currently just issues a warning and refuses to initialize this part of the hub, which means that 3.0 devices connected through a 3.0 hub may not work correctly. Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170666 Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6780 Tested-by: build bot (Jenkins)
2014-09-04libpayload: usb: Unify USB speed between XHCI stack and USB coreJulius Werner
This patch removes the confusing concept of a special "xhci_speed" with a different numeric value from the usual speed used throughout the USB core (except for the places directly interacting with the xHC, which are explicitly marked). It also moves the MPS0 decoding function into the core and moves some definitions around in preparation of later changes that will make the stack SuperSpeed-ready. It makes both set_address implementations share a constant for the specification-defined SetAddress() recovery delay and removes pointless additional delays from the non-XHCI version. Change-Id: I422379d05d4a502b12dae183504e5231add5466a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170664 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit f160d4439c0d7cea1d2e6b97207935d61dcbb2f2) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6776 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-31libpayload: xhci: Ensure to reset dequeue pointer on stopped endpointsJulius Werner
This patch fixes a bug in the XHCI stack that occurs when a multi-TRB TD times out before the last TRB is processed. The driver will correctly issue a Stop Endpoint command in that case, but the xHC will still preserve the transfer state and just pick up right after that on the next doorbell ring. It will then process the leftover TRBs from the old TD the next time a transfer is issued. (cf. XHCI 4.6.9) We fix this by changing the existing xhci_reset_endpoint() calls in transfer functions to not only trigger on Halted (2) and Error (4), but also on Stopped (3). That function will not actually issue a Reset Endpoint command in this case, but it will nuke the whole transfer ring and issue a Set TR Dequeue Pointer command, which is sufficient (though slightly overkill) to solve our problem. Change-Id: I3abbe30ff9d4911a8af1f792324e018d427019e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170833 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit f12424af0e29ac12963e8e5a7970fadcc0bb6cee) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6787 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-08-28libpayload: Change CONFIG_X86_SERIAL_CONSOLE to CONFIG_8250_SERIAL_CONSOLEGabe Black
While the 8250 compatible serial port driver is primarily useful on x86 systems because it works with the legacy x86 com ports, some devices which aren't x86 based have 8250 compatible UARTs as well. This change renames the CONFIG_X86_SERIAL_CONSOLE option to the more general and direct CONFIG_8250_SERIAL_CONSOLE and fixes up the dependencies so that non-x86 systems can enable the driver, although it will default to on on x86 and off otherwise. Also, the default IO port address that's added to the sysinfo structure on x86 and which is intended to be overwritten by a value in the coreboot tables is not used on ARM. That variable is adjusted so that it's more clear it's a default value, and made dependent on x86 since that's the only place its value is actually used. Change-Id: Ifeaade0e7bd76d382426e947275a9c933da4930e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/170834 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a10e39a2da3cb0bfb316c0869cf5025078e287f) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6655 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-28libpayload: usb: Allow direct instantiation of MMIO host controllersJulius Werner
The existing USB_MEMORY mechanism to instantiate non-PCI host controllers is clunky and inflexible... most importantly, it doesn't allow multiple host controllers of the same kind. This patch replaces it with a function that allows payloads to directly instantiate as many host controllers of whatever type they need. Change-Id: Ic21d2016a4ef92c67fa420bdc0f0d8a6508b69e5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169454 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit b6e95c39dd91f654f0a345f17b3196f56adf4891) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6644 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-19libpayload: usb: Fix several minor USB stack bugsJulius Werner
This patch fixes the following minor bugs in the USB stack: 1. Ensure that all dynamically allocated device structures are cleaned on detachment, and that the device address is correctly released again. 2. Make sure MSC and HID drivers notice missing endpoints and actually detach the device in that case (to prevent it from being used). 3. Make sure XHCI-specific set_address() cleans up all data structures on failure. 4. Fix broken Slot ID range check that prevented XHCI devices from being correctly cleaned up. Change-Id: I7b2b9c8cd6c5e93cb19abcf01425bcd85d2e1f22 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170665 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 9671472263ddd0c30400ae3b6da780a18cd21ded) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6701 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18libpayload: usbmsc: Remove DETACHED state from MSC device structureJulius Werner
The USB MSC device structure contains a "ready" state that can be either "ready", "not ready" or "detached". The last one can only be assigned when the device is completely unresponsive and gets forcefully logically detached via usb_detach_device(). This call (at least in the current version) also calls all destructors and frees the complete usbdev_t structure (including the MSC specific part), which unfortunately makes storing the "detached" state in that very structure a little pointless. This patch reduces the "ready" value to a simple boolean and makes sure that all detachment cases immediately return from the MSC driver, carefully avoiding any use-after-free opportunities. Change-Id: Iff1c0849f9ce7c95d399bb9a1a0a94469951194d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170667 (cherry picked from commit fd4529f37fdd1c93a8b902488ffeef7001b1a05a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6654 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-08-14libpayload: xhci: Make XHCI stack usable on ARMJulius Werner
This patch updates the libpayload XHCI stack to run on ARM CPUs (tested with the DWC3 controller on an Exynos5420). Firstly, it adds support for 64-byte Slot/Endpoint Context sizes. Since the existing context handling code represented the whole device context as a C struct (whose size has to be known at compile time), it was necessary to refactor the input and device context structures to consist of pointers to the actual contexts instead. Secondly, it moves all data structures that the xHC accesses through DMA to cache-coherent memory. With a similar rationale as in the ARM patches for EHCI, using explicit cache maintenance functions to correctly handle the actual transfer buffers in all cases is presumably impossible. Instead this patch also chooses to create a DMA bounce buffer in the XHCI stack where transfer buffers which are not already cache-coherent will be copied to/from. Change-Id: I14e82fffb43b4d52d687b65415f2e33920e088de Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169453 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 1fa9964063cce6cbd87ba68334806dde8aa2354c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14libpayload: Make EHCI driver cache-awareJulius Werner
This patch makes the EHCI driver work on ARM platforms which usually do not support automatic cache snooping. It uses the new DMA memory mechanism (which needs to be correctly set up in the Coreboot mainboard code) to allocate all EHCI-internal communication structures in cache-coherent memory, and cleans/invalidates the externally supplied transfer buffers in Bulk and Control functions with explicit calls as necessary. Old-Change-Id: Ie8a62545d905b7a4fdd2a56b9405774be69779e5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167339 (cherry picked from commit 322338934add36a5372ffe7d2a45e61a4fdd4a54) libpayload: ehci: Cache management is hard, let's go copying... It turns out that my previous commit to make the EHCI stack cache aware on ARM devices wasn't quite correct, and the problem is actually much trickier than I thought. After having some fun with more weird transfer problems that appear/disappear based on stack alignment, this is my current worst-case threat model that any cache managing implementation would need to handle correctly: Some upper layer calls ehci_bulk() with a transfer buffer on its stack. Due to stack alignment, it happens to start just at the top of a cache line, so up to 64 - 4 bytes of ehci_bulk's stack will share that line. ehci_bulk() calls dcache_clean() and initializes the USB transfer. Between that point and the call to dcache_invalidate() at the end of ehci_bulk(), any access to the stack variables in that cache line (even a speculative prefetch) will refetch the line into the cache. Afterwards any other access to a random memory location that just happens to get aliased to the same cache line may evict it again, causing the processor to write out stale data to the transfer buffer and possibly overwrite data that has already been received over USB. In short, any dcache_clean/dcache_invalidate-based implementation that preserves correctness while allowing any arbitrary (non cache-aligned) memory location as a transfer buffer is presumed to be impossible. Instead, this patch causes all transfer data to be copied to/from a cache-coherent bounce buffer. It will still transfer directly if the supplied buffer is already cache-coherent, which can be used by callers to optimize their transfers (and is true by default on x86). Old-Change-Id: I112908410bdbc8ca028d44f2f5d388c529f8057f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169231 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 702dc50f1d56fe206442079fa443437f4336daed) Squashed the initial commit and a follow up fix. Change-Id: Idf7e5aa855b4f0221f82fa380a76049f273e4c88 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6633 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14libpayload: Add in a missing "static".Gabe Black
The readwrite_chunk was private to the usb mass storage driver, but wasn't marked as static which was upsetting the compiler. Change-Id: I0ef5c5f96a29f793dd43ff672a939902bad13c45 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/169816 Reviewed-by: Julius Werner <jwerner@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8140e6145b3d072b7f12a924418570022207c065) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6648 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-14libpayload: Reduce media init timeout to 5 seconds.Shawn Nematbakhsh
Currently, we wait for up to 30 seconds for a device to become ready to respond to a TEST_UNIT_READY command. In practice, all media devices become ready much sooner. But, certain devices do not function with libpayload's USB driver, and always timeout. To provide a better user experience when booting with such devices, reduce the timeout to 5 seconds. Change-Id: Icceab99fa266cdf441847627087eaa5de9b88ecc Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169209 (cherry picked from commit 9e55204e92adca0476d273565683f211d6803e7a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6647 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-14libpayload: Increase accuracy of timeout period for media init.Shawn Nematbakhsh
When bringing up media, we claim to wait for up to 30 seconds for a device to respond to our TEST_UNIT_READY command. Actually, we can wait far longer because we do not take into account execution delay. To improve timeout accuracy, make use of gettimeofday(), which calculates time based upon a CPU counter. This improves the user experience slightly when certain non-working USB devices are used. Change-Id: Id9605ecfc0a522d7a0b039fd8eac541232605082 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169208 Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 1d3d535db83ff478c512e37f37015b43927b3efc) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-14libpayload: usbmsc: Split transfers into 64KB chunksDuncan Laurie
Add a new function to split transfer requests into chunks of 64KB in order to be as compatible as possible with devices that choke when sent large transfer requests. Change-Id: Id11990bd149af14af5535de4af47bda21d1ab51e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169170 Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 4c413b007aa23da830877127dd556c4c38b43042) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6636 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-12libpayload: usbhub: Don't clear PSC unless it was setJulius Werner
The current USB hub code always clears the port status change after checking it, regardless of whether it was set in the first place. Since this check runs on every poll, it might create a race condition where the port status changes right between the GET_PORT_STATUS and the CLEAR_FEATURE(C_PORT_CONNECT), thus clearing the statrus change flag before it was ever read. Let's add one extra if() to avoid that possible headache. Change-Id: Idd46c2199dc6c240bd9ef068fbe70cccc88bac42 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/168098 (cherry picked from commit f7f6f008f701ab3e4a4f785032d8024d676e11cb) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6617 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12libpayload: ehci: Set explicit terminate bits in dummy_qh next pointers.Julius Werner
The EHCI host controllers in Samsung Exynos SoC seem to be a little more picky than Intel ones. When they reach the dummy_qh in the periodic frame list, they try to access the next qTD pointer even though it's NULL, and run into a HostSystemError. This patch explicitly sets the Terminate bit on those pointers to mark them invalid. Change-Id: I50fa79bbf1c5fab306d7885c01efd66b13e279b8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/66884 Reviewed-by: Vincent Palatin <vpalatin@chromium.org> (cherry picked from commit c575a5c958ce88732d28044352c89418bcd5ea86) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6608 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12libpayload: Make USB transfer functions return amount of bytesJulius Werner
The USB bulk and control transfer functions in libpayload currently always return 0 for success and 1 for all errors. This is sufficient for current use cases (essentially just mass storage), but other classes (like certain Ethernet adapters) need to be able to tell if a transfer reached the intended amount of bytes, or if it fell short. This patch slightly changes that USB API to return -1 on errors, and the amount of transferred bytes on successes. All drivers in the current libpayload mainline are modified to conform to the new error detection model. Any third party users of this API will need to adapt their if (...<controller>->bulk/control(...)) checks to if (...<controller>->bulk/control(...) < 0) as well. The host controller drivers for OHCI and EHCI correctly implement the new behavior. UHCI and the XHCI stub just comply with the new API by returning 0 or -1, but do not actually count the returned bytes. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48308 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Updated the patch to support XHCI as well. Change-Id: Ic2ea2810c5edb992cbe185bc9711d2f8f557cae6 (cherry picked from commit e39e2d84762a3804653d950a228ed2269c651458) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6390 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-11libpayload: xhci: Use Event Data TRBs for transfer event generationJulius Werner
The current XHCI code only sets IOC on the last TRB of a TD, and doesn't set ISP anywhere. On my Synopsys DesignWare3 controller, this won't generate an event at all when we have a short transfer that is not on the last TRB of a TD, resulting in event ring desync and everyone having a bad time. However, just setting ISP on other TRBs doesn't really make for a nice solution: we then need to do ugly special casing to fish out the spurious second transfer event you get for short packets, and we still need a way to figure out how many bytes were transferred. Since the Short Packet transfer event only reports untransferred bytes for the current TRB, we would have to manually walk the rest of the unprocessed TRB chain and add up the bytes. Check out U-Boot and the Linux kernel to see how complicated this looks in practice. Now what if we had a way to just tell the HC "I want an event at exactly *this* point in the TD, I want it to have the right completion code for the whole TD, and to contain the exact number of bytes written"? Enter the Event Data TRB: this little gizmo really does pretty much exactly what any sane XHCI driver would want, and I have no idea why it isn't used more often. It solves both the short packet event generation and counting the transferred bytes without requiring any special magic in software. Change-Id: Idab412d61edf30655ec69c80066bfffd80290403 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170980 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit e512c8bcaa5b8e05cae3b9d04cd4947298de999d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6516 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10serial: Separate the serial hardware init and the serial console init.Gabe Black
You might want to use the serial hardware for something other than a console, or you might want to intercede in the serial stream to wrap it in another protocol. This is what you'd do to send output to GDB while using it to debug the payload. Change-Id: I2218c0dbb988dacb64e5bdaf5d92138828eff8b6 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/179559 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit da9ab46d974745125fe7d8b29ce43336c3586cd5) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6547 Tested-by: build bot (Jenkins)
2014-08-05libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig.Gabe Black
When libpayload header files are included in the payload itself, it's possible that the payloads config settings will conflict with the ones in libpayload. It's also possible for the libpayload config settings to conflict with the payloads. To avoid that, the libpayload config settings have _LP_ (for libpayload) added to them. The symbols themselves as defined in the Config.in files are still the same, but the prefix added to them is now CONFIG_LP_ instead of just CONFIG_. Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65303 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6427 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-12libpayload: find source of input charactersLuigi Semenzato
This change makes it possible for vboot to avoid an exploit that could cause involuntary switch to dev mode. It gives depthcharge/vboot some information on the type of input device that generated a key. BUG=chrome-os-partner:21729 TEST=manually tested for panther BRANCH=none CQ-DEPEND=CL:182420,CL:182241,CL:182946 Change-Id: I87bdac34bfc50f3adb0b35a2c57a8f95f4fbc35b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://chromium-review.googlesource.com/182357 Reviewed-by: Luigi Semenzato <semenzato@chromium.org> Tested-by: Luigi Semenzato <semenzato@chromium.org> Commit-Queue: Luigi Semenzato <semenzato@chromium.org> Reviewed-on: http://review.coreboot.org/6003 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-10libpayload: Drop obsolete setting of reg_base in [oex]hciNico Huber
Setting of `controller->reg_base` is of no use here, as it is never read (in another function) later. Looks like this pattern originated from uhci.c where it makes sense. By removing the indirection through `reg_base` we also fix a possible truncation to u32. Change-Id: I5c99c5bf1f5b1d6c04bd84d87fd3e275fd7d0411 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6251 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-10libpayload: Catch null-pointer dereference in xHCINico Huber
Fix a possible null-pointer dereference (hopefully) before anyone runs into this. Also don't switch ports to xHCI if initialization failed. Change-Id: I5dbaeb435a98ead0b50d27fde13c9f1433ea3e81 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6245 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-10libpayload: xHCI: Always initialize controller->pcidevNico Huber
As the controller structure is never fully cleared, this one wasn't initialized for non-pci controllers (but checked for non-null later). Change-Id: I852671c5f55650bdb6cd97f4ec74b1f95ee894c7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6246 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-10libpayload: Use unsigned long for BARs in *hci_init()Nico Huber
Using void* for physical addresses leads to much casting and confuses developers when to convert from physical to virtual addresses or the other way around. When using plain integers for physical addresses and pointers for virtual addresses things become much cleaner and we won't ever end up dereferencing a physical address. Change-Id: I24cd53b81c7863b6d14f0cbb4ce8937728b37c1c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6244 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-10libpayload: Keep physical addresses in console driversNico Huber
Like done in FILO, libpayload's console drivers might be initialized before a relocation. So keep physical pointers in there which won't break on relocation. Change-Id: I52e5d9d26801a53fd6a5f3c7ee03f61d6941d736 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6247 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-10libpayload: Remove redundant phys_to_virt() from xHCI driverNico Huber
Remove a redundant phys_to_virt() that sneaked in the initialization of PCI xHCI controllers. The use of casts from void* to u32 (and vice versa) prompts for things going wrong here. That will be addressed in a later commit. Change-Id: Ibc71ed6ee7016529c0e3a51559aaec07aaaba315 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/6243 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-17libpayload: Fix to properly disable serial consoleKyösti Mälkki
With coreboot builds with serial console disabled, there is no CB_TAG_SERIAL entry in coreboot tables. We ended up with lib_sysinfo.serial == NULL and serial_hardware_is_present == 1. Change-Id: I9a2fc0b55bf77769f2f2bfbb2b5476bee8083f7d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5723 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-15libpayload/ahci: Fix a warning by decompartmentalise the AHCI driver.Edward O'Callaghan
Decompartmentalise AHCI driver into two parts, ATA and ATAPI. Add a few superficial comments while here. This also fixes a compiler warning. Change-Id: Ia1fd545b39868a81cbc311f6ffc786f9f1f61415 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4783 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-19libpayload/options: Fix out of array read.Vladimir Serbinenko
It resulted in garbage in upper bytes of numeric options. Change-Id: I5e5d8b770ed93c7e8a1756a5ce32444b6a045bac Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4691 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-01-19libpayload: Bring keyboard_wait_write() backPatrick Georgi
Code is using it... Change-Id: I6894b45cbbf70c8e7ce37ce18d93cadf0ea9fbfc Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4649 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-01-08libpayload: reintroduce optional PCI in XHCI driverPatrick Georgi
being a good citizen on the box, libpayload tries to return to EHCI mode on shutdown, so a non-XHCI capable USB driver after it (eg. in the OS) finds something to work with. Change-Id: Id227d646e08a258b841c644263112f0815dd486c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4547 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-21Libpayload: Add keyboard-disable function.Martin Roth
Add a function to disable and clear the keyboard controller. Verified Code flow in normal boot/S3 resume with print statements. Verified Keyboard was correctly disabled and flushed by booting to recovery mode screen while pressing keys on the integrated keyboard. Change-Id: I3e1f011c3436fee5ce10993c6c26a3c8597c6fca Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/63627 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4395 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21libpayload: Increase USB EHCI transfer timeoutJulius Werner
The EHCI driver defines a maximum transfer timeout of two seconds. The comments state that during tests the maximum amount of required transfer time was for the SCSI TEST_UNIT_READY command on certain devices. We have now observed a USB device (Patriot Memory 13fe:3100) that can NAK this command for slightly more than two seconds. It will also completely fail if the timeout hits, since it gets confused by the subsequent CSW retry/recovery mechanism and starts producing babble errors. This patch increases the timeout to three seconds to circumvent this problem. To test, boot a Falco from a red-black RageXT USB stick. Change-Id: I3c4fef468fb16eacc5a487d76d025a78fb450e27 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63095 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sameer Nanda <snanda@chromium.org> Reviewed-on: http://review.coreboot.org/4379 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-11-25libpayload: usb mass storage card hot plugAaron Durbin
Mass storage devices such as card readers show up as as USB devices. However the media not be inserted. In those situations the previous code would just fake a disk and call usbcreate_disk. This is inappropriate because it forms a 1:1 mapping of USB device to disk leading to the inability to remove the disk and/or handle "hot plug" card insertion and removals. To alleviate this issue introduce the notion of ready to the usbmsc structure. It tracks detached, not ready, and ready states. The polling routine is then used to track not ready to ready transitions thereby creating and removing disks appropriately. This handles the case of inserting and removing a card that shows up as a new disk. Booted recovery mode. Able to observe inerstion and removal of sdcard. Also able to insert valid USB flash drive to boot as well. Change-Id: I3eefbe537ec1b9c975744b8984b06c17ae236f40 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57948 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4226 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload: usb mass storage detect empty mediaAaron Durbin
There is currently a hard-coded 30 sec delay in the mass storage driver while waiting for each device to become ready. However, mass storage card readers that are empty return an error code on the TEST UNIT READY command. A REQUEST SENSE command then needs to be issued and interrogate the data to determine if no media is present. If no media determination is found to be true the USB device is no longer considered a candidate to be a disk. This code does lead to the fact that the media card reader needs to be populated at enumeration time. I suspect this is not an issue as it appears the storage stack in libpayload can't handle removable media coming online later. Booted recovery and dev modes. Noted that removable mass storage devices with no media were ignored without any boot delay. Change-Id: Ida7a45614d97c6e6fbfc9bb099765aad4df550fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57828 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4225 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload: Add USB support for non-PCI controllersStefan Reinauer
Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25libpayload (EHCI): correctly align PORTSCStefan Reinauer
Two structures in the USB EHCI stack were pointing to hardware but not marked attribute((packed)) hence leaving it to GCC to correctly align the data structures. Next, the number of reserved bytes in hc_op_t was wrong (but implicitly aligned to the correct values on x86) It seems this worked fine on x86, but on ARM it was doing the wrong thing. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I94bed4850ded7d3f7bbc7ff3079c103c6054c22d Reviewed-on: https://gerrit.chromium.org/gerrit/55555 Commit-Queue: Stefan Reinauer <reinauer@google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4174 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-30libpayload: Switch xHCI shared ports back to EHCI on shutdownNico Huber
On Intel's Panther Point the xHCI ports are shared with an EHCI controller. Our xHCI driver switches them to xHCI, naturally. But we forgot to switch them back on shutdown, which left them unusable by a non-xHCI aware operating system. Change-Id: I70ef08655a603b42ee939935d50cf77ea97878a3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3791 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-09-24libpayload: Remove unnecessary keyboard mode setting codeShawn Nematbakhsh
keyboard_init attempts to read the existing mode register, set the 'XLATE' bit, and write it back. The implementation is buggy because the keyboard may be active at the time we read the mode, and we can misinterpret scancode data as the reply to our command. It leads to problems where the KB gets disabled in firmware. In fact, setting the 'XLATE' bit is completely unnecessary, even if we desire QEMU keyboard support. We already set this bit when we initialize the keyboard in pc_keyboard_init. Basically, this code does nothing (or worse), so just remove it. Change-Id: Iab23f03fa8bced74842c33a7d263de5f449bb983 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/3883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-18libpayload: ahci: Increase timeout for signature readingNico Huber
We can't read the drives signature before it's ready, i.e. spun up. So set the timeout to the standard 30s. Also put a notice on the console, so the user knows why the signature reading failed. Change-Id: I2148258f9b0eb950b71544dafd95776ae70afac8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17libpayload: ahci: Fix command engine shutdownNico Huber
A timeout while waiting for a device' signature has shown that our error path wasn't correct. The shutdown of the ports command engine always timed out. Fix that by waiting for FR (FIS Receive Running) to be cleared independently from CR (Command List Running) and after clearing FRE (FIS Receive Enable). Change-Id: I50edf426ef0241424456f1489a7fc86a2cfc5753 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3494 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Fill gaps in the xHCI driverNico Huber
Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Port usb hub driver to use the generic codeNico Huber
This is mostly a rewrite, don't even try to read a diff. Tested with an internal rate matching hub on a QM77 board and three hubs integrated into DELL monitors. Change-Id: Ib12fa2aa90af4e0f37143d2ed92c4a1705b6d774 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3451 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Add a generic driver for usb hubsNico Huber
The current drivers for external usb hubs and root hubs all follow the same pattern. Before adding another one with 90% of the same code, extract the common parts and rewrite them with a simple interface. This also adds debouncing of new attachments. Current drivers just waited 100ms before they reset the device. However, we should check if the device becomes disconnected and reconnected during this period. Porting of the current hub drivers will take place in separate commits (when I have time to test the older HCIs). Change-Id: I0c0ce0ac1b1cc51fb4cd009b3f9fcd1b9d2ba8fe Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3450 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: usb: Add interval attribute to endpointsNico Huber
Read bInterval from endpoint descriptors and store it in our endpoint_t struct. The interval is encoded dependently on the device' speed and the endpoint's type. Therefore, it will be normalized to the binary logarithm of the number of microframes, i.e. t = 125us * 2^interval The interval attribute will be used in the xHCI driver. Change-Id: I65a8eda6145faf34666800789f0292e640a8141b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3449 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Redirect USB slave init through controller driverPatrick Georgi
xHCI requires special treatment of set_address since it determines the device number itself (instead of the driver, as with the other controllers). The controller also wants to validate a chosen device configuration and we need to setup additional structures for the device and the endpoints. Therefore, we add three functions to the hci_t structure, namely: set_address() finish_device_config() destroy_device() Current implementation for the Set Address request moved into generic_set_address() which is set_address() for the UHCI, OCHI and EHCI drivers. The latter two are only provided as hooks for the xHCI driver. The Set Configuration request is moved after endpoint enumeration. For all other controller drivers nothing changes, as there is no other device communication between the lines where the set_configuration() call moved. Change-Id: I6127627b9367ef573aa1a1525782bc1304ea350d Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3447 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: usb: Skip non-endpoint descriptors during initNico Huber
During device initialization, skip any non-endpoint descriptor before reading the endpoint descriptors. By now, only HID descriptors were skipped. Change-Id: I190f3ae44b864aa71d5f32c3738097cf8f33a61b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-06-04libpayload: Whitelist Mobile Panther Point AHCI controllerNico Huber
Add the Mobile Panther Point (PPT) AHCI controller (DEVID 0x1e03) to the list of tested controllers. Also comment the only other listed controller (Mobile ICH9). The PPT AHCI controller was tested with a QM77 chipset on a Kontron KTQM77 board. Change-Id: Ia396761411f4f9289af11ec8e1b144512b2fc126 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3361 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-15libpayload: Fix the logic for hardware-less serial consolesDave Frodin
This fixes the configuration where serial console output is being sent to non-existant hardware to be captured with I/O trapping. In this configuration where there isn't serial hardware present we still want to init the consoles. We just never want to read non-existant hardware. Change-Id: Ic51dc574b9c0df3f6ed071086b0fb2119afedc44 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3249 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-11libpayload: storage.c: Fix typo in st*orage in commentPaul Menzel
Reading commit »libpayload: New AHCI, ATA and ATAPI drivers« (1f6bd94f) [1], the spelling error was found and is now fixed. [1] http://review.coreboot.org/1622 Change-Id: Id418bcb99c1a9a400a49fc04078e465bd0908074 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3071 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08libpayload: Handle multifunction bridge devices better.Gabe Black
This change modifies the code in libpayload that scans the PCI hierarchy for USB controllers. Previously, if a devices primary function (function 0) was a bridge, then none of the other functions, if any, would be looked at. If one of the other functions was a bridge, that wouldn't be handled either. The new version looks at each function that's present no matter what, and if it discovers that it's a bridge it scans the other side. Change-Id: I37f269a4fe505fd32d9594e2daf17ddd78609c15 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2517 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-26libpayload: Fix unused function warning in EHCI stackStefan Reinauer
The function dump_qh() was added a while back but never used. Hide it behind USB_DEBUG so it doesn't cause warnings when not debugging the USB stack. Change-Id: Idb3c7bb214895ef82676d181836a578bf161e8e0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2909 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>