summaryrefslogtreecommitdiff
path: root/payloads/libpayload/drivers
AgeCommit message (Collapse)Author
2023-11-07libpayload/libc/time: Fix possible overflow in multiplicationYidi Lin
The value from raw_read_cntfrq_el0() could be large enough to cause overflow when multiplied by USECS_PER_SEC. To prevent this, both USECS_PER_SEC and hz can be reduced by dividing them by their GCD. This patch also modifies the return type of `timer_hz()` from `uint64_t` to `uint32_t`, assuming that in practice the timestamp counter should never be that fast. BUG=b:307790895 TEST=boot to kernel and check the timestamps from `cbmem` Change-Id: Ia55532490651fcf47128b83a8554751f050bcc89 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78888 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18libpayload/drivers/video: Add cursor movement support in consoleEran Mitrani
Add support for moving the console cursor horizontally and vertically. BUG=b:300405745 TEST=Tested using firmware shell on Rex. Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I585add120b559396bc0e28aa972b0ae2a33f1fa8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77900 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-07libpayload: Add after an if conditional on the next lineArthur Heymans
Clang warns about this. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I8bdd45a7ef47274b0253397fa8fd9409a70d2192 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-28libpayload: Fix clang fallthrough warningArthur Heymans
Clang does not recognize comments to indicate falltrough is intended behavior. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Idcf7a24fc763b80863902702172b4ea950e132b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77431 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-08-01libpayload/drivers/cbmem_console: Use C99 flexible arraysElyes Haouas
Use C99 flexible arrays instead of older style of one-element or zero-length arrays. It allows the compiler to generate errors when the flexible array does not occur at the end in the structure. Change-Id: I3fd3f068ff731e1d9fed7c38ba6815e1eed86450 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-12libpayload/uhci: Re-write UHCI RH driver w/ generic_hub APINico Huber
This is a complete rewrite of the UHCI root-hub driver, based on the xHCI one. We are doing things by the book as far as possible. One special case is uhci_rh_reset_port() which does the reset se- quencing that usually the hardware would do. This abandons some quirks of the old driver: * Ports are not disabled/re-enabled for every attachment anymore. * We solely rely on the Connect Status Change bit to track changes. * Further status changes are now deferred to the next polling round. The latter fixes endless loops in combination with commit 7faff543da (libpayload: usb: Detach unused USB devices). Change-Id: I5211728775eb94dfc23fa82ebf00fe5c99039709 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-06-06libpayload/drivers/usb/xhci.c: Check for NULL in xhci_initFred Reitberger
Ensure the physical_bar parameter passed to xhci_init is not NULL, else return NULL. This may occur when an XHCI controller is disabled and no resources are allocated for it. BUG=b:284213001 Change-Id: I05c32612606793adcba3f4a5724092387a215d41 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75645 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04libpayload/uhci: Return expected length for control/bulk transfersNico Huber
Libpayload's USB API was changed in commit e9738dbe2b (libpayload: Make USB transfer functions return amount of bytes). However, the UHCI driver was never adapted. Instead of returning 0 for success, we can return the expected data length as a best effort. We won't be able to catch short transfers this way, but previously working cases will work again. Change-Id: I31d7de495a46af401e2cbe5a3b8f6349facad8ff Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-11-21libpayload: Fix compiler warningsThomas Heijligen
Following warnings occur when compiling with `i386-elf-gcc (coreboot toolchain v2022-09-18_c8870b1334) 11.2.0` drivers/serial/8250.c:75: [-Werror=unused-variable] Move variable declaration inside the `#if !CONFIG(LP_PL011_SERIAL_CONSOLE)` block drivers/udc/dwc2.c:505: [-Werror=format=] use `%zd` to match type `size_t` Change-Id: Id285c24cba790f181fa203f3117e5df35bed27c4 Signed-off-by: Thomas Heijligen <src@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69764 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-09-01x86/cache.c: Implement dcache_*Hsin-Te Yuan
A new ChromeOS automated test will be introduced to check the cbmem log of diagnostic boot mode. Because the diagnostic boot does not allow booting into kernel, the test must perform AP reset and then check the cbmem log afterwards. However, the memory content might not be written back to memory (from CPU cache) during AP reset because of the cache snooping mechanism on x86. Hence, some API to flush cache is needed. Implement dcache_* to allow flushing cache proactively in x86. To avoid unnecessary flush, check dma_coherent before calling dcache_* functions, which will be always true in x86. Therefore, this change won't affect the original functionality. BUG=b:190026346 TEST=FW_NAME=primus emerge-brya libpayload Cq-Depend: chromium:3841252 Signed-off-by: Hsin-Te Yuan <yuanhsinte@google.com> Change-Id: I622d8b1cc652cbe477954a900885d12e6494d94d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-12libpayload: usb: Fix spacing issuesYidi Lin
Found by: find payloads/libpayload/drivers/usb -type f -name "*.[ch]" | xargs \ util/lint/checkpatch.pl --types SPACING -q --fix-inplace -f Change-Id: Id23e2e573e475c6d795812a4b2df9aeffbcaaaf4 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66596 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-12libpayload: usbmsc: Prevent usbdisk_remove() from being called twiceYidi Lin
When removing SD card from USB card reader, the USB MSC stack does not detach the device immediately. Instead, the USB MSC stack calls usbdisk_remove() and calls usb_msc_destroy() after several pollings. It results in usbdisk_remove() being called twice. Since the usbmsc_inst_t instance is freed after first usbdisk_remove() call, the second call invokes an invalid usbmsc_inst_t instance and causes exception in CPU. This patch prevents usbdisk_remove() from being called twice by setting usbdisk_created to zero. BUG=b:239492347 TEST=insert an empty SD card into the USB card reader then remove the SD card. AP firmware does not crash. Change-Id: I0675e9fde3e770d63dd0047928356a204245ef18 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66449 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01libpayload/pci: Add pci_map_bus function for Qualcomm platformPrasad Malisetty
Add 'pci_map_bus' function and PCIE_QCOM config for Qualcomm platform. BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe endpoint (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: I7d1217502cbd7d4d0cdd298919ae82435630d61c Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com> Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57615 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-04treewide: Unify Google brandingJon Murphy
Branding changes to unify and update Chrome OS to ChromeOS (removing the space). This CL also includes changing Chromium OS to ChromiumOS as well. BUG=None TEST=N/A Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-05-20libpayload/pci: Add pci_map_bus function for MediaTek platformJianjun Wang
Add 'pci_map_bus' function and PCIE_MEDIATEK config for MediaTek platform. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I9ea7d111fed6b816fa2352fe93c268116519a577 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-05-20libpayload/pci: Add support for bus mappingJianjun Wang
Move the common APIs to pci_ops.c and IO based operations to pci_io_ops.c, and add pci_map_bus_ops.c to support bus mapping. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ie74801bd4f3de51cbb574e86cd9bb09931152554 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-05-11libpayload/nvme: Fix controller disablement in (de)init sequenceNico Huber
We wrote to the wrong register. The EN bit is in the CC (Controller Configuration) register at 0x14. Fixes re-initialization in QEMU and on siemens/chili during a second FILO run. Change-Id: I125de55d7f1a7c9f070437190c5a08a288b274f8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-11libpayload/nvme: Test for NVMe-command-set bit individuallyNico Huber
We only need to know if the NVMe command set is supported. Other command-set bits can be set too, but we don't have to care. Fixes init in QEMU which has more command-set bits set by now. Change-Id: I29a693cf8cc13775e94dc671e8d0412ad86fef9c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-11libpayload/nvme: Fix error paths of nvme_init()Nico Huber
We mustn't try to release resources that we haven't acquired yet. Also, sending commands to the NVMe device is futile if we already timed out. Fixes hangs after a failed init noticed in QEMU and on siemens/chili. Change-Id: Ib83c7785d6e0dc3c44fbd50a30694c74932750d6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-30commonlib/bsd/helpers: Remove redundancy with libpayload definesJakub Czapiga
Move STRINGIFY() from coreboot string.h to commonlib/bsd/helpers.h Remove redundant defines from libpayload.h and libpayloads' standard headers. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I3263b2aa7657759207bf6ffda750d839e741f99c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-04libpayload: cbmem_console: Drop loglevel markers from snapshotJulius Werner
coreboot recently introduced non-printable loglevel markers in the CBMEM console. Payloads were generally unaffected since they don't use log levels and it is still legal to append lines without a marker to the log. However, payloads using cbmem_console_snapshot() to display existing logs from coreboot have started seeing '?' characters in place of the markers. This patch fixes the issue by filtering out marker characters. BUG=b:221909874 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4a9e5d464508320cf43ea572d62896d38c2a128d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-07libpayload: cbgfx: Clear screen by memcpyYu-Ping Wu
Instead of setting each pixel in the framebuffer, use memcpy() to clear screen faster. As this method should be fast enough, remove the fast path using memset(). The speed of clear_screen() on brya (x_resolution = 1920, bytes_per_line = 7680): - Using memset(): 15ms - Setting each pixel: 25ms - Using memcpy(): 14ms Also remove set_pixel_raw() since it's now used in only one place. BUG=none TEST=emerge-brya libpayload TEST=Saw developer screen on brya BRANCH=none Change-Id: I5f08fb50faab48d3db6b61ae022af3226914f72b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-08-27libpayload: cbgfx: Clear screen by sequential accessYu-Ping Wu
Currently clear_screen() calls set_pixel() to set all pixels. However, the actual order of pixels being set depends on the framebuffer orientation. With NORMAL orientation, the framebuffer is accessed sequentially; with LEFT_UP/RIGHT_UP orientation, it is accessed back and forth, leading to performance drop (>1 second on bugzzy). Therefore, ensure sequential access to the framebuffer, regardless of the orientation. BUG=b:194967458 TEST=emerge-cherry libpayload BRANCH=dedede Change-Id: Iecaff5b6abc24ba4b3859cbc44c0d61b2a90b2d9 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57104 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-12libpayload: Mark Intel 300 series AHCI as testedNico Huber
Tested with filo on roda/rw14. Change-Id: Ia5f868d3a9cead0a872e6d3e9fdacd6eeb7f158b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56666 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09payloads/libpayload: add MTK_TIMER_V2 configRex-BC Chen
The timer structure (in particular, the offset to memory addresses) on recent MTK SoCs for example MT8195 has been changed. BUG=b:195274787 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ifd6ff65a825c4309c47f3b115b80a8ecd42fedac Reviewed-on: https://review.coreboot.org/c/coreboot/+/56845 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03libpayload: i8042: Enable keyboard translation by default on exitDuncan Laurie
Add a Kconfig option to set the keyboard translation state on exit and set the default to true. This restores the keyboard to the power-up defaults for firmware that does not always run libpayload keyboard init to have consistent state, and provides an option to disable translation for keyboards that might need it. Change-Id: I25dfe3f425a5bb57e97476564886672b707aa3bd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-04-18libpayload/keyboard: Reset to scancode set #2 on exitNico Huber
If we select scancode set #1 and keep that, it can confuse Linux with keyboards that don't return to set #2 when asked to load the defaults. This happens for instance with various integrated Think- Pad keyboards but was also seen with an external PS/2 one. The chosen configuration, scancode set #2 without translation, seems to be the default for many systems. So we can expect other payloads and kernels to work with it. Change-Id: I28d74590e9f04d32bb2bbd461b67f15014f927ec Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47594 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18libpayload/keyboard: Add a detention stateNico Huber
Instead of ignoring keyboards indefinitely when they failed to initialize, we wait 5s and then start over with the hotplug detection. As we always assume a present keyboard at first, we'd otherwise never have a chance to hot plug a device after the initial 30s timer ran out. Change-Id: I8dec4921b2e932442d52b5118cdcf27090633498 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-18libpayload/keyboard: Implement hot (un)pluggingNico Huber
While we assume a keyboard is attached, we send an echo command every 500ms. If there is no data coming from the keyboard within 200ms, we assume it was detached. Correspondingly, if we assume no keyboard is attached, we run an echo command once per second. Change-Id: I2c75182761729bf30711305f3d8b9d43eafad675 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-07libpayload/storage: Add NVMe driverThomas Heijligen
Tested with qemu virtual NVMe and Intel hardware. Works with FILO. Change-Id: Ie75b1dc743dac3426c230c57ee23b771ba3a6e0c Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33582 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24libpayload/i8042: Add API to peek on keyboard input queueNico Huber
Change-Id: I60699e044b5bacd3f5292fed7edbf529ae133284 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47592 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24libpayload/keyboard: Add debug output to all state transitionsNico Huber
Change-Id: I643a821d4c41fc068f2bab0bd571b0a4a359f59a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Hide console output by defaultNico Huber
Change-Id: I855d975a4729da34a6fa73a63dbbd12c856bdc00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Implement self-testNico Huber
The keyboard self-test is required for some devices. At least one device (integrated keyboard in a ThinkPad X201) actually starts the test automatically leading to spurious output and no response for the first seconds. We wait up to 5s for the self-test result. On failure or timeout, the command will be repeated until the 30s init timer runs out. This happens all in the background of the UI polling loop. To not unnecessarily delay the boot process, we first try an oppor- tunistic initialization which skips the self-test. Change-Id: Ie07b31e74d06e116ac81e76309621eed39a19b49 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Add timestamp to track time spent in a stateNico Huber
Will be used to time out in states that don't always advance. Change-Id: I28235e7638d8157cedf81fd915a41d28a1fc070b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47087 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24libpayload/keyboard: Turn init sequence into a state machineNico Huber
We'll process the init sequence as part of the polling loop. This should have several advantages: * It eases error handling, i.e. we can return to an earlier state. * We don't have to stall initialization when a keyboard takes a little longer. * Generally, these keyboards can be hot-plugged (albeit not by design). Change-Id: I9cf5cf31eb420b3994bec20e56a72d37f3d2996e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Avoid races around input drainingNico Huber
Draining the keyboard's buffer is only possible when the keyboard port is enabled. We should also disable input scanning before, as the buffer could be filled again with new keystrokes otherwise. Change-Id: Ibac9c0d04880ff4a3efda5ac53da2f9731f6602c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Introduce keyboard_drain_input()Nico Huber
Move the input-buffer draining into a function. It uses the low-level i8042 API directly to avoid conflicts with changes in the high-level keyboard API. Change-Id: I9427c5b8be4d59c2ee3da12d6168d34590043682 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47084 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24libpayload/keyboard: Revise keyboard_cmd() error handlingNico Huber
Even if we are careful, it's still possible that we read spurious data from the keyboard, e.g. keystrokes. Namely, when we send the reset/disable command, there is a race before the command is pro- cessed. So we should always process data from the keyboard in a loop. We break it, when an ACK (0xfa) or a NAK (0xfe) is received, and warn on unexpected data unless it might be due to the mentioned race. This also gives us the opportunity to use command-specific timeouts which we take from Linux: 1s for the keyboard self-test (as there are keyboards that perform the test before acking the command) and 200ms for all other commands. Change-Id: I60a2643a8ff4b9231c63bf970c8749c97c7d8926 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-23libpayload/keyboard: Revise scancode set and translation configNico Huber
Some background first: The original XT keyboards used what we call scancode set #1 today. The PC/AT keyboards introduced scancode set #2, but for compatibility, its controller translated scancodes back to set #1 by default. Newer keyboards (maybe all we have to deal with) also support switching the scancode set. This means the translation option in the controller and the scancode set selection in the keyboard have to match. In libpayload, we only support set #1 scancodes. So we either need the controller's trans- lation on and set #2 selected in the keyboard, or the controller's translation off and set #1 selected in the keyboard. Valid configurations: * SET #1 + XLATE off * SET #2 + XLATE on Both with and without the PC_KEYBOARD_AT_TRANSLATED option, we were only configuring one of the two settings, leaving room for invalid configurations. With this change, we try to select scancode set #2 first, which seems to be the most supported one, and configure the controller's translation accordingly. We try to fall back to set #1 on failure. We also keep translation disabled during configuration steps to ensure that the controller doesn't accidentally translate confi- guration data. On the coreboot side, we leave the controller's translation at its default setting, unless DRIVERS_PS2_KEYBOARD is enabled. The latter enables the translation unconditionally. For QEMU this means that the option effectively toggles the translation, as QEMU's controller has it disabled by default. This probably made a lot of earlier testing inconsistent. Fixes: commit a95a6bf646 (libpayload/drivers/i8402/kbd: Fix qemu) The reset introduced there effectively reverted the scancode selection made before (because 2 is the default). It's unclear if later changes to the code were only necessary to work around it. Change-Id: Iad85af516a7b9f9c0269ff9652ed15ee81700057 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-23libpayload/i8042: Add API to get/set kbd translation stateNico Huber
Change-Id: I49aa1c244cb60ea290df102f06f641c765f59fa5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22libpayload/usb: Fix printf format string mismatches in debug messagesCaveh Jalali
This fixes format string mismatch errors in the USB subsystem found by the compiler's format string checker. BUG=b:167517417 TEST=enabled all USB controllers on volteer and fixed resulting compiler errors when USB_DEBUG is enabled. Change-Id: I4dc70baefb3cd82fcc915cc2e7f68719cf6870cc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-16libpayload/i8042: Increase response timeout to 1.5sNico Huber
The current timeout of 500ms is too low. For instance self-test of the KBC integrated into IT8516E took almost 1s in tests. We already check for presence of the KBC before the self-test. So the timeout should only trigger on a hardware defect and we can leave some margin. Change-Id: I95f01a4e605a9c7deb894a71e102c3a881759bb1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09libpayload: storage.c: remove unneeded #if CONFIG()Thomas Heijligen
Change-Id: I6e5679f66840105b3f9628071ac7aace9128107f Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-08libpayload: Make OHCI enums into typesJacob Garber
The OHCI header file declares various enums as follows: enum { ... } enum_name; Since the name is at the end, this is actually declaring a variable called enum_name and *not* a type, which is causing a multiple definition error in GCC 10. Move the enum_name before the opening brace to prevent this. Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I452c0a1b118990942aa53f1e7e77f5e8378e8975 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-26libpayload/keyboard: Use `bool` as return typeNico Huber
Use `bool` whenever `0` was used to indicate an error. The mixing of different types for return values was mildly confusing and potentially dangerous with the i8042 API close by that uses `0` for success. Change-Id: I876bb5076c4921f36e3438f359be8ac4c09248cc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-20libpayload/storage/ahci: Use pci_dev struct in ahci_initialize()Felix Singer
Clean up ahci_initialize() by using pci_dev struct. Change-Id: I2d5673c631d978d8ebd0c4a90962ab9cccaf40a2 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-20libpayload/storage/ahci: Use pacc pointer to read device classFelix Singer
The PCI bus gets already scanned while gathering system information. Therefore, use the pacc pointer from sysinfo_t to read the device class of PCI devices instead of rescanning the bus. Change-Id: I4c79e71777e718f5065107ebf780ca9fdb4f1b0c Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-19libpayload/storage: Enable STORAGE_64BIT_LBAFelix Singer
32-bit LBA limits drives, that have or emulate 512B sectors, to 2TiB capacity. Therefore, enable the 64-bit support. Change-Id: I663029a2137c5af3c77d576fe27db0b8fa7488a9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-19libpayload/storage: Enable all AHCI controllers by defaultFelix Singer
Since the list of tested controllers is not actively maintained, enable all AHCI controllers by default. Also, improve the readability of its help text by adding a comma to it. Change-Id: If30f58f8380ab599f8985e85c64510dc88e96268 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-30libpayload: use PRIu64 type to print u64Jeremy Compostella
The appropriate way to print a u64 variable regardless of the current architecture is to use the PRI*64 macros. libpayload is mostly used in 32 bits but when ported to other projects and compiled in 64 bits it breaks the compilation. Change-Id: I479fd701f992701584d77d43c5cd5910f5ab7633 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-09-27libpayload: Fix file permissionsKyösti Mälkki
Change-Id: Ibdc211d7f4ec0fbbefafb5eae4c1615c64c99280 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-21payloads: Drop unneeded empty linesElyes HAOUAS
Change-Id: I6faeb7c783052edc4217d2d301dbb905e1fc6a19 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-18libpayload: cbgfx: Fix 'equals' counter for Lanczos resamplingYu-Ping Wu
The current initialization of the 'equals' counter is incorrect, so that when 'equals >= SSZ * SSZ', the pixels in the sample array might not be all the same, leading to a wrong pixel value being set in the framebuffer. The 'equals' counter stores the number of latest pixels that were exactly equal. Within the for loop of 'ox', the sample array is updated in a column-based order, and the 'equals' counter is updated accordingly. However, the 'equals' counter is initialized in a row-based order, which causes it to be set too large than it should be. Consider the example where sample[sx][sy] are initially: [X X X A A A] // sy = 0 [X X X B B B] [X X X B B B] [X X X B B B] [X X X B B B] [X X X B B B] // sy = SSZ Then, the correct implementation will initialize 'equals' to be 15, with last_equal being B. Suppose all of the remaining pixels are B. Then, at the end of the 'while (fpfloor(ixfp) > ix)' loop when ix = 4, or equivalently after 4 more columns of sample are updated, 'equals' will be 15 + 6 * 4 = 39, which is greater than SSZ * SSZ = 36, but we can see there are still 2 A's in the sample: [B B B B A A] [B B B B B B] [B B B B B B] [B B B B B B] [B B B B B B] [B B B B B B] Therefore, we must also initialize the 'equals' counter in a column-based order. BUG=b:167739127 TEST=emerge-puff libpayload TEST=Character 'k' is rendered correctly on puff BRANCH=zork Change-Id: Ibc91ad1af85adcf093eff40797cd54f32f57111d Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-04libpayload/xhci: Fix Slot State field width definitionCaveh Jalali
According to the xHCI spec, the Slot State field in the Slot Context Data Structure is 5 bits wide. So, fix the code to match. ref. xHCI spec 1.2 section 6.2.2, Figure 6-2: Slot Context Data Structure BUG=none TEST=xHCI compiles Change-Id: I0ae735af3d0840aeee846fa939c37af9aea3dff1 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45023 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31xhci: Do not set the CRCR_CS bitCaveh Jalali
We do not need to set the CS (Command Stop) bit in the Command Ring Control Register. CS is implied by CA (Command Abort). I'm not sure if there is a defined execution order for these command bits, so it's safer to only use the CA bit as it includes the CS function. Ref: xHCI spec 1.2 (May 2019), Section 5.4.5, Table 5-24. BUG=b:160354585,b:157123390 TEST=able to boot into recovery using USB stick on servo v2 on volteer as well as HooToo 8-1 hub Change-Id: Iaeba98b6da8da49f529358ca6d68270440ea0f42 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-31xhci: Fix Abort command event handlingCaveh Jalali
This fixes issues with how we handle events generated by the xHCI "command abort" command. first, depending on the state of the xHCI controller, the COMMAND_ABORTED may not be generated. If the controller was between commands, only the COMMAND_RING_STOPPED event will be generated. Second, do not adjust the command ring "cur" pointer as that just confuses the controller. BUG=b:160354585,b:157123390 TEST=able to boot into recovery using USB stick on servo v2 on volteer as well as HooToo 8-1 hub Change-Id: I055df680d1797f35d9730e2bfdb4119925657168 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-28libpayload: cbgfx: Support buffered I/OHung-Te Lin
For payloads with UI based on CBGFX, they usually start by calling clear_canvas or clear_screen and then draw the UI elements. However, that makes the screen flicker. A typical solution is to identify and minimize the area to redraw. However for payloads with complicated UI and do not care about latency, an alternative is to enable buffered I/O. The new enable_graphics_buffer() will redirect all graphics I/O into an invisible working buffer. To flush (redraw) the buffer to the real screen, call flush_graphics_buffer(). To stop buffering, call disable_graphics_buffer(). BUG=None TEST=Add the enable, flush and disable calls to payload 'depthcharge', built a firmware and boots into Chrome OS recover UI. No more flickering. The average rendering time on x86 platform is 1.2ms. Change-Id: Id60a2824fd9e164feae16b92b68b003beabea8d3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44654 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-24libpayload: Cache copy of `cb_framebuffer` structNico Huber
Our AArch64 code supports dynamic framebuffer allocation which makes it necessary to change the framebuffer information during runtime. Having a pointer inside `libsysinfo` made a mess of it as the pointer would either refer to the original struct inside the coreboot table or to a new struct inside payload space. The latter would be unaffected by a relocation of the payload. Instead of the pointer, we'll always keep a copy of the whole struct, which can be altered on demand without affecting the coreboot table. To align the `video/graphics` driver with the console driver, we also replace `fbaddr` with a macro `FB` that calls phys_to_virt(). Change-Id: I3edc09cdb502a71516c1ee71457c1f8dcd01c119 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-24libpayload: Cache physical location of serial-console structNico Huber
In the presence of self-relocating payloads, it's safer to keep physical addresses in `libsysinfo`. Change-Id: Icd30e95c6b8115d16dd793914fb01a1a9da1854f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-24libpayload: Cache physical CMOS option table locationNico Huber
In the presence of self-relocating payloads, it's safer to keep physical addresses in `libsysinfo`. Change-Id: I64a37bef263022edb504086c02a3fd22ce068ba4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-24libpayload: Cache physical cbmem console addressNico Huber
Same as with other consoles and drivers that cache an address outside the payload (e.g. video/corebootfb), we should store the physical address, so we can derive the virtual address on demand. This makes it save to use the address across relocations. As a first step in migrating `libsysinfo` to `uintptr_t`, we also switch to the physical address there. Fixes the default build of FILO, tested with Qemu/i440FX and Qemu/Q35. Change-Id: I4b8434af69e0526f78523ae61981a15abb1295b0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-13libpayload: cbgfx: Add color mapping functionalityYu-Ping Wu
Similar to set_blend(), add set_color_map() for mapping background and foreground colors of a bitmap. Also add clear_color_map() for clearing the saved color mappings. Note that when drawing a bitmap, the color mapping will be applied before blending. Also remove unnecessary initialization for static variable 'blend'. BRANCH=puff BUG=b:146399181, b:162357639 TEST=emerge-puff libpayload Change-Id: I640ff3e8455cd4aaa5a41d03a0183dff282648a5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-25payloads/libpayload/drivers/usb/usb.c: Remove whitespace before tabElyes HAOUAS
Change-Id: Iba73ae4d89cef94f238e9a74300f6088669f355b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-23libpayload: cbgfx: Add draw_line()Yu-Ping Wu
Add a function draw_line() to draw either a horizontal or vertical line segment. Theoretically a horizontal line can also be drawn by calling draw_rounded_box() with dim_rel.x being the line length and dim_rel.y being the line width. However, due to the truncation in integer division when converting relative coordinates to absolute ones, this will potentially produce inconsistent line widths, depending on the value of pos_rel.y. It is guaranteed that draw_line() will produce consistent line widths, regardless of the position of the line. Also, when the thickness argument is zero, this function is able to draw a line with 1-pixel width, which is not achievable by draw_rounded_box(). BRANCH=puff BUG=b:146399181, b:161424726 TEST=emerge-puff libpayload Change-Id: I2d50414c4bfed343516197da9bb50791c89ba4c2 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2020-07-21libpayload/xhci: Try harder to read 32-bit caps at onceNico Huber
With commit 287cf6c7d1 (lp/drivers/usb: Work around QEMU XHCI register issue) we restructured our capability register accesses because the compiler used the wrong access size. While we do use only 32-bit types now, a compiler may still try to be clever and optimize things in unexpected ways. So we add an explicit read32() now. For instance for the 8-bit MaxPorts field, in the most significant bits of `capreg + 4`, our read + mask + shift ((cap)->hciparams1 & 0xff000000) >> 24 was turned into a single 8-bit read instruction by GCC on x86: 31: 0f b6 52 07 movzbl 0x7(%edx),%edx Change-Id: I76accd0ef718e70ca46807eb06a9177c3afd99f1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-15cbgfx: Add blend functions to calculate transparencyShelley Chen
Up until now we have no way of adding transparency into our firmware screens. Add set_blend() and clear_blend() functions to store alpha value and rgb values to calculate alpha blending in calculate_colors(). BUG=b:144969091,b:160839199 BRANCH=puff TEST=dut-control power_state:rec press ctrl-d Ensure background is dimmed when dialog pops up Change-Id: I95468f27836d34ab80392727d726a69c09dc168e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-09libpayload: cbgfx: Replace bilinear resampling with LanczosJulius Werner
This patch improves the image resampling (scaling) code in CBGFX to use the Lanczos algorithm that is widely considered the "best" resampling algorithm (e.g. also the first choice in Python's PIL library). It is of course much more elaborate and therefore slower than bilinear resampling, but a lot of the difference can be made up with optimizations, and the resulting code was found to still produce acceptable speeds for existing Chrome OS UI use cases (on an Arm Cortex-A55 device, time to scale an image to 1101x593 went from ~88ms to ~275ms, a little over 3x slowdown). Nevertheless, if this should be too slow for anyone there's also an option to tune it down a little, but still much better than bilinear (same operation was ~170ms with this). Example images (scaled up by a factor of 7): Old (bilinear): https://i.imgur.com/ytr2n4Z.png New (Lanczos a=3): https://i.imgur.com/f0vKluM.png Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Idde6f61865bfac2801ee4fff40ac64e4ebddff1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-07-06libpayload: cbgfx: Fix add_fractions() overflow reductionJulius Werner
log2(1) is 0 and log2(0) is -1. If we have the int64_t 0xffffffff then log2(0xffffffff >> 31) = log2(0x1) = 0, so the current reduction code would not shift. That's a bad idea, though, since 0xffffffff when interpreted as an int32_t would become a negative number. We need to always shift one more than the current code does to get a safe reduction. This also means we can get rid of another compare/branch since -1 is the smallest result log2() can return, so the shift can no longer go negative now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib1eb6364c35c26924804261c02171139cdbd1034 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-28libpayload/cbgfx: Fix overflow in transform_vector()Yu-Ping Wu
Fix potential overflow when multiplying integers in transform_vector(). This issue is causing the absolute coordinate of the bottom right corner of the box to be incorrectly calculated for draw_rounded_box(), which is used in menu UI to clear the previous screen. In addition, check the lower bound in within_box(). BRANCH=none BUG=b:146399181, b:159772149 TEST=emerge-puff libpayload TEST=Previous screen is cleared properly for menu UI Change-Id: I57845f54e18e5bdbd0d774209ee9632cb860b0c2 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42770 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06usb/xhci: Fix timeout logicCaveh Jalali
This fixes a logic bug in how timeouts are reported back. In the timeout case, the original code would return -1 instead of 0. All call sites expect a return value of 0 as the timeout indicator. Signed-off-by: Caveh Jalali <caveh@chromium.org> Change-Id: I81a888aa0a1544e55e6a680be8f3b7f6e0d87812 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-06libpayload: drivers/usb: add a USB pre-poll hookCaveh Jalali
This adds a hook so that a payload can optionally perform USB service functions in conjunction with regular USB port status polling. In particular, this allows depthcharge to control the state of an external USB mux. Some SoCs like Tiger Lake have a USB mux for Type-C ports that must be kept in sync with the state of the port as reported by the TCPC. This can be achieved by hooking into the poll routine to refresh the state of the USB mux. BUG=b:149883933 TEST=booted into recovery from Type-C flash drive on volteer Change-Id: Ic6c23756f64b891b3c5683cd650c605b8630b0fb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-26libpayload/cbgfx: Remove gap between adjacent boxesYu-Ping Wu
When drawing two adjacent boxes with draw_box(), there will be a gap between them. This is due to the truncation in integer division when calculating the bottom right coordinate of the box. In this patch, the relative bottom right coordinate is calculated before transforming to an absolute one. The same issue is also fixed for draw_rounded_box(). Also check validity of 'pos_rel' and 'dim_rel' arguments for draw_rounded_box(). BRANCH=none BUG=chromium:1082593 TEST=emerge-nami libpayload Change-Id: I073cf8ec6eb3952a0dcb417b4c3c3c7047567837 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09payloads: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.*[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.*[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: I9f74ed19257bc4234465b8f912deff1b485173f9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41179 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04libpayload/drivers/usb/xhci: Allow xHCI v1.2 in libpayloadDossym Nurmukhanov
The latest Intel FSP advertises xHCI v1.2 chipset support, so update libpayload to include that version. No critical changes were identified in review of the xHCI v1.2 spec, and booting from USB works with the included change as expected. BUG=b:155315876 TEST=booting from multiple USB sticks/hubs with the latest Intel FSP that advertises xHCI v1.2 Change-Id: I236fed9beef86ff5e1bf7962d882fdae5817a1ff Signed-off-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41039 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02libpayload: xhci: Fix CAPREG address calculationJulius Werner
I rushed CB:40895 in to fix a bug only to introduce another. xhci_init() no longer crashes, but it doesn't correctly initialize the XHCI controller either, and unfortunately the error messages are all hidden behind USB_DEBUG. This patch fixes the incorrect address calculation to what it was before CB:39838. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I14293e2135108db30ba6fd2efea0573fe266fa37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01libpayload: Fix 16-bit read/write to PCI_COMMAND registerElyes HAOUAS
Change-Id: I34facbe0cbbdc91066799b586d96abca1599c509 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40743 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01lp/drivers/usb: Add quirk for QEMU XHCI root hubDuncan Laurie
The QEMU XHCI driver does not implement the Port Change Detect bit in the USBSTS register. As a result no devices are attached without looking at each port individually. Detect this as a quirk based on the QEMU XHCI controller PCI ID, and apply it to the root hub quirk list so it can get used by the generic hub driver to skip this check. With this change an attached USB mass storage device is detected and able to boot when supplied to qemu: -drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img -device qemu-xhci,id-xhci -device usb-storage,bus=xhci.0,drive=usbmsc Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30libpayload: xhci: Do not memcpy registersJulius Werner
memcpy() is meant to be used on normal memory and often implemented with architecture-specific optimizations to make that as performant as possible. MMIO registers often have special access restrictions that may be incompatible with whatever memcpy() does. For example, on arm64 it uses the LDP (load pair) to load 16 bytes at a time, which makes 4-byte MMIO registers unhappy. This patch removes the caching of the XHCI capreg registers and changes it back to a pointer. The CAP_GET() macro is still accessing a full (non-bitfield) uint32_t at the end so this should still generate a 4-byte access (which was the goal of the original change in CB:39838). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id058c8813087a8e8cb85f570399e07fb8a597108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-20libpayload: Make 8250 UART driver relocation safeNico Huber
`lib_sysinfo->serial` is a virtual pointer into coreboot tables. It's not valid across relocation. Accessing the wrong value during relocation of FILO resulted in a hang with DEBUG_SEGMENT and UART console enabled. Work around that by caching the whole table entry locally. An alternative would be to revise `sysinfo`, to contain no virtual pointers to anything outside the payload. Change-Id: I03adaf57b83a177316d7778f7e06df8eb6f9158e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reto Buerki <reet@codelabs.ch> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-14lp/drivers/usb: Work around QEMU XHCI register issueDuncan Laurie
The QEMU XHCI controller does not support byte/word reads from the capability register and it expects dword reads only. In order to make this work move the access of the capability register fields to use macros instead of a packed struct bitfield. This issue was filed upstream: https://bugs.launchpad.net/qemu/+bug/1693050 The original fix attempt in 2012 was not effective: https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3 With this change the controller is detected properly by the libpayload USB drivers. Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-23libpayload/drivers/nvram: Fix coding stylePatrick Georgi
If one branch has braces all should have them. Change-Id: I94e70c6c6188768d9b37a2d154f4d5b8af31f78c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39396 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23libpayload/drivers/nvram: Add function to write RTCPatrick Rudolph
Add a function to set the RTC to provided struct tm. Change-Id: I17b4c1ee0dcc649738ac6a7400b087d07213eaf0 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/23585 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10libpayload/corebootfb: Replace obsolete macros FI and CHARSNico Huber
These macros serve no purpose anymore, let's do the substitution manually once and for all. Also update the comment on the macros and fix whitespace on the touched lines. TEST=Checked that there are no changes in compiled code. Change-Id: Ib60f9ab157e2e7d44b551dd4f695a6c25ebeb405 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-09libpayload: Add uart/serial driver support for trogdorT Michael Turney
Change-Id: I5be3904298cd88c60dbc6d8d662beeede2abe442 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35960 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09libpayload: Improve rtc functionsPatrick Rudolph
On Lenovo T500 the RTC readings where wrong, as RTC has different encodings, depending on the statusB register. Support BCD vs binary RTC format and AM/PM vs 24h RTC format. Fixes wrong date and time on Lenovo 500. Change-Id: Id773c33e228973e190a7e14c3d11979678b1a619 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/18498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-09libpayload/corebootfb: Add option to center a 80x25 consoleNico Huber
This makes payloads which are hardcoded to a 80x25 console look much better, e.g. FILO with its "GRUB" user interface. Change-Id: I9f4752328d85d148cd40a0c2337c7191e1d6a586 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-09libpayload/corebootfb: Keep local copy of framebuffer infoNico Huber
Keeping a local copy of the framebuffer info allows us to make changes, e.g. add offsets. It also avoids trouble with relocation. Change-Id: I852c4eb229dd0724114acb302ab2ed7164712b64 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-26treewide: capitalize 'USB'Elyes HAOUAS
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24treewide: Capitalize 'CMOS'Elyes HAOUAS
Change-Id: I1d36e554618498d70f33f6c425b0abc91d4fb952 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38928 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24libpayload: cbgfx: Fix potential overflowing expressionYu-Ping Wu
BRANCH=none BUG=none TEST=none Change-Id: Icd37a6abc01d9fcbcf54525d47b15c9930a9b9fb Signed-off-by: Yu-Ping Wu <yupingso@google.com> Found-by: Coverity Scan #1419491 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-17payloads: Fix typosElyes HAOUAS
Change-Id: Ib7f1ba1766e5c972542ce7571a8aa3583c513823 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-17libpayload/corebootfb: Fix character buffer relocationNico Huber
The `chars` pointer references the heap which is part of the payload and relocated along with it. So calling phys_to_virt() on it was always wrong; and the virt_to_phys() at its initialization was a no-op anyway, when the console was brought up before relocation. While we are at it, add a null-pointer check. Change-Id: Ic03150f0bcd14a6ec6bf514dffe2b9153d5a6d2a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-02-05libpayload/xhci: Fix MPS handling in set_addressKangheui Won
We set MPS to speed_to_default_mps(speed) initially but later compare maxpacketsize with 8 to change mps. So compare with speed_to_default_mps(speed) to determine if we need to change settings here. BUG=b:147783572 BRANCH=none TEST=works with 12Mbps/8MPS USB device Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I32455483fceec56f14af6118b77615c14b3f9f39 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38556 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-14libpayload: cbgfx: Support drawing a box with rounded cornersYu-Ping Wu
A function draw_rounded_box() is added to draw a box with rounded corners. In addition, this function is different from draw_box() in 2 ways: - The position and size arguments are relative to the canvas. - This function supports drawing only the border of a box (linear time complexity when the thickness is fixed). BRANCH=none BUG=b:146105976 TEST=emerge-nami libpayload Change-Id: Ie480410d2fd8316462d5ff874999ae2317de04f9 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-12-20libpayload/drivers/i8042: add error messages to i8042_probeEric Lai
Print error message before error return for better debugging. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I52039dcab72c6295dfb6b887a7000a6d2bd050ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/37689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-12-16libpayload: Implement reading from CBMEM consoleYu-Ping Wu
To support showing CBMEM logs on recovery screen, add a function cbmem_console_snapshot() to copy the CBMEM console to an allocated buffer. Non-printable characters are automatically replaced with '?' to ensure the returned string is printable. BRANCH=none BUG=b:146105976 TEST=emerge-nami libpayload Change-Id: Ie324055f5fd8276f1d833fc9d04f60a792dbb9f6 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-12-13libpayload/drivers/i8042: Add error handlingEric Lai
Add error handling on I8042_CMD_WR_CMD_BYTE failure. BUG=b:145130110 TEST=Draillion keyboard is usable on every boot. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I56c472ae7e399d4862c6e41b70f53a21d718157d Reviewed-on: https://review.coreboot.org/c/coreboot/+/37664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-12-11libpayload/drivers/i8042: Add AT translated Keyboard supportEric Lai
Wilco device uses the AT translated keyboard and doesn't need to set scancode set. Remove the ignore flag and put into translation mode instead. BUG=b:145130110 TEST=Draillion keyboard is usable on every boot. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie1053e24e44c5bad28b56cc92d091e24f3d9b6fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/37594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 08:50:33 +0000