summaryrefslogtreecommitdiff
path: root/payloads/libpayload/drivers/usb
AgeCommit message (Expand)Author
2016-08-02libpayload: split "Drivers" config section in KconfigAntonello Dettori
2016-06-12libpayload: usb: xhci: Support rockchip xHCI controllerLiangfeng Wu
2016-05-09libpayload: xhci: Set MPS based on speedVaradarajan Narayanan
2015-11-05libpayload: xhci: Add delay to get reset working more reliablyRajmohan Mani
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-10-29libpayload: usbmsc: Add small delay during initialization to fix CZ60Julius Werner
2015-10-27libpayload: usb: Retry get_descriptor() on failureShawn Nematbakhsh
2015-09-17libpayload: usb: dwc2: check device connect state before enable channelYunzhi Li
2015-09-17libpayload: usb: dwc2: fix hub hot-plug bugYunzhi Li
2015-08-28libpayload: usb: dwc2: Always return 'size' transferred bytes for OUTJulius Werner
2015-08-19libpayload: usb: dwc2: fix usb plug/unplug bugYunzhi Li
2015-08-14libpayload: usb: xhci: Fix list of cleared port change bitsJulius Werner
2015-08-14libpayload: usb: xhci: Count new Max Scratchpad Bufs bits from XHCI 1.1Julius Werner
2015-08-14libpayload: usb: dwc2: fix short packet transferYunzhi Li
2015-08-14libpayload: usb: Fixup wrong use of configChunfeng Yun
2015-08-14libpayload: xhci: Carry over fixes from Chromium treeJulius Werner
2015-08-13libpayload: usb: don't prematurely free the usb deviceAaron Durbin
2015-07-18libpayload: usb: Add support for SuperSpeed hubsJulius Werner
2015-07-18libpayload: usb: xhci: Prevent address reuseJulius Werner
2015-07-16libpayload: usb: dwc2: support split transactionYunzhi Li
2015-07-06libpayload: usb: dwc2: support interrupt transferYunzhi Li
2015-06-30libpayload: Make Kconfig bools use IS_ENABLED()Stefan Reinauer
2015-06-30libpayload: add UDC driver for Designware controllerhuang lin
2015-06-08Remove empty lines at end of fileElyes HAOUAS
2015-06-03libpayload: usb: Support MTK xHCI host controllerYidi Lin
2015-06-03libpayload: usb: Max packet size of SuperSpeed control EPs should be 512.Chunfeng Yun
2015-05-21Remove address from GPLv2 headersPatrick Georgi
2015-05-12libpayload: Fix passing BAR to EHCI driverPatrick Georgi
2015-05-04libpayload: Guard PCI using code appropriately in XHCI driverPatrick Georgi
2015-04-22libpayload: usb: fix compilation error in debug fuctionHarry Pan
2015-04-14libpayload dwc2: use bus addresses for buffersIonela Voinescu
2015-04-14libpayload dwc2: Use a new FIFO allocation methodhuang lin
2015-04-14libpayload: Add dwc2 usb driverhuang lin
2015-04-09libpayload: PCI bus scan - Eliminate endless loopLee Leahy
2015-03-23libpayload: usb: xhci: set ENT flag in last Normal TRBSourabh Banerjee
2015-03-23libpayload: EHCI: Support root-hub TT featureJim Lin
2015-03-21libpayload ehci: Use 64-byte aligned data structures for periodic transfersJim Lin
2015-03-21libpayload: EHCI: Fix transaction error for interrupt transferJim Lin
2015-03-19libpayload/usb: wait a millisecond to work around device bugsPatrick Georgi
2015-03-19libpayload EHCI: Add memory barrier to EHCI driverFurquan Shaikh
2015-03-04libpayload: Don't try to free individual xhci device slotsPatrick Georgi
2015-02-23libpayload: Improve sanity checking in UHCI driverPatrick Georgi
2015-02-23libpayload: avoid use-after-free in OHCI driverPatrick Georgi
2015-01-03libpayload: avoid memory overflowsPatrick Georgi
2014-12-31libpayload: Fix pointer related castsFurquan Shaikh
2014-12-31libpayload: usb: xhci: Fix TD size if it overflows 5 bitsRajmohan Mani
2014-12-30libpayload: Clean up USB build warningsMarc Jones
2014-12-30libpayload: usbmsc: Implement limited LUN supportJulius Werner
2014-12-30libpayload: usbmsc: Set correct allocation length for REQUEST SENSEJulius Werner
2014-12-22libpayload: usb: Try to avoid reusing device addressesJulius Werner
2014-12-17libpayload: usb: Detach unused USB devicesShawn Nematbakhsh
2014-11-13libpayload: usb: Remove automatic clear_stall() calls from transfersJulius Werner
2014-11-13libpayload: usb: Fix up usb_shutdown() code pathsJulius Werner
2014-10-29libpayload: usb: ehci: Honor 10ms reset recovery periodJulius Werner
2014-10-22libpayload: usb: Make OHCI work with ARM systemsJulius Werner
2014-10-22libpayload: usb: xhci: Fix STALL endpoint handlingShawn Nematbakhsh
2014-10-02libpayload: usb: xhci: Treat port reset as a port status changeShawn Nematbakhsh
2014-10-02libpayload: usb: Remove generic roothub reset port functionShawn Nematbakhsh
2014-09-10libpayload: usbhid: Fix typo on descriptor parsingJulius Werner
2014-09-10libpayload: ehci: Fix byte count in dump_td()Julius Werner
2014-09-04libpayload: usb: Refactor USB enumeration to fix SuperSpeed devicesJulius Werner
2014-09-04libpayload: usb: Unify USB speed between XHCI stack and USB coreJulius Werner
2014-08-31libpayload: xhci: Ensure to reset dequeue pointer on stopped endpointsJulius Werner
2014-08-28libpayload: usb: Allow direct instantiation of MMIO host controllersJulius Werner
2014-08-19libpayload: usb: Fix several minor USB stack bugsJulius Werner
2014-08-18libpayload: usbmsc: Remove DETACHED state from MSC device structureJulius Werner
2014-08-14libpayload: xhci: Make XHCI stack usable on ARMJulius Werner
2014-08-14libpayload: Make EHCI driver cache-awareJulius Werner
2014-08-14libpayload: Add in a missing "static".Gabe Black
2014-08-14libpayload: Reduce media init timeout to 5 seconds.Shawn Nematbakhsh
2014-08-14libpayload: Increase accuracy of timeout period for media init.Shawn Nematbakhsh
2014-08-14libpayload: usbmsc: Split transfers into 64KB chunksDuncan Laurie
2014-08-12libpayload: usbhub: Don't clear PSC unless it was setJulius Werner
2014-08-12libpayload: ehci: Set explicit terminate bits in dummy_qh next pointers.Julius Werner
2014-08-12libpayload: Make USB transfer functions return amount of bytesJulius Werner
2014-08-11libpayload: xhci: Use Event Data TRBs for transfer event generationJulius Werner
2014-08-05libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig.Gabe Black
2014-07-12libpayload: find source of input charactersLuigi Semenzato
2014-07-10libpayload: Drop obsolete setting of reg_base in [oex]hciNico Huber
2014-07-10libpayload: Catch null-pointer dereference in xHCINico Huber
2014-07-10libpayload: xHCI: Always initialize controller->pcidevNico Huber
2014-07-10libpayload: Use unsigned long for BARs in *hci_init()Nico Huber
2014-07-10libpayload: Remove redundant phys_to_virt() from xHCI driverNico Huber
2014-01-08libpayload: reintroduce optional PCI in XHCI driverPatrick Georgi
2013-12-21libpayload: Increase USB EHCI transfer timeoutJulius Werner
2013-11-25libpayload: usb mass storage card hot plugAaron Durbin
2013-11-25libpayload: usb mass storage detect empty mediaAaron Durbin
2013-11-25libpayload: Add USB support for non-PCI controllersStefan Reinauer
2013-11-25libpayload (EHCI): correctly align PORTSCStefan Reinauer
2013-09-30libpayload: Switch xHCI shared ports back to EHCI on shutdownNico Huber
2013-06-13libpayload: Fill gaps in the xHCI driverNico Huber
2013-06-13libpayload: Port usb hub driver to use the generic codeNico Huber
2013-06-13libpayload: Add a generic driver for usb hubsNico Huber
2013-06-13libpayload: usb: Add interval attribute to endpointsNico Huber
2013-06-13libpayload: Redirect USB slave init through controller driverPatrick Georgi
2013-06-13libpayload: usb: Skip non-endpoint descriptors during initNico Huber
2013-04-08libpayload: Handle multifunction bridge devices better.Gabe Black
2013-03-26libpayload: Fix unused function warning in EHCI stackStefan Reinauer
2013-03-25libpayload: fix use-after-free in usb_exit()Mathias Krause
2013-03-25libpayload: EHCI - detach controller in ehci_shutdown()Mathias Krause
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 16:10:12 +0000