| Age | Commit message (Collapse) | Author |
|---|
|
Will be used by the APIC.
BUG=b:109749762
TEST=Verified by the other cls in the stack.
Change-Id: Id86f2719d98a90318ac625e09601e5dbb06e3765
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/28239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The segment error descriptor is actually 13 bits long.
BUG=b:109749762
TEST=Verified by causing a segment error
Change-Id: I3439f9ce1e8cf0c472c4eb82d74a787718c9609f
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fixes build with gcc8.1
Change-Id: I042f79ddfb4c249e00b5b259280289b8534f6854
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/27546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add: raw_read_cntfrq_el0() and raw_read_cntpct_el0()
Required to support Arch64 Timer
Change-Id: I86aa97039304b9e9336d0146febfe1811c9e075a
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The VA space needs to be extended to support 48bit, as on Cavium SoCs
the MMIO starts at 1 << 47.
The following changes were done to coreboot and libpayload:
* Use page table lvl 0
* Increase VA bits to 48
* Enable 256TB in MMU controller
* Add additional asserts
Tested on Cavium SoC and two ARM64 Chromebooks.
Change-Id: I89e6a4809b6b725c3945bad7fce82b0dfee7c262
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/24970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Also unify __attribute__ ((..)) to __attribute__((..)) and
handle ((__packed__)) like ((packed))
Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The word 'coreboot' should always be written in lowercase, even at the
start of a sentence.
Change-Id: I2ec18ca55e0ea672343a951ab81a24a5630f45fd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
The coreboot sites support HTTPS, and requests over HTTP with SSL are
also redirected. So use the more secure URLs, which also saves a
request most of the times, as nothing needs to be redirected.
Run the command below to replace all occurences.
```
$ git grep -l -E 'http://(www.|review.|)coreboot.org'
| xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g'
```
Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
coreboot and libpayload currently use completely different code to
perform a full cache flush on ARM64, with even different function names.
The libpayload code is closely inspired by the ARM32 version, so for the
sake of overall consistency let's sync coreboot to that. Also align a
few other cache management details to work the same way as the
corresponding ARM32 parts (such as only flushing but not invalidating
the data cache after loading a new stage, which may have a small
performance benefit).
Change-Id: I9e05b425eeeaa27a447b37f98c0928fed3f74340
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Allows to use SSE and floating point in payloads without digging to
much into x86 assembly code.
Tested on Lenovo T500 (Intel Core2Duo).
Both floating point operation and SSE is properly working.
Change-Id: I4a5fc633f158de421b70435a8bfdc0dcaa504c72
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18345
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Some simple implementation of the MultiBoot protocol may not pass a
memory map (MULTIBOOT_FLAGS_MMAP missing in the flags) but just the two
values for low and high memory, indicated by the MULTIBOOT_FLAGS_MEMINFO
flag.
Support those kind of boot loaders too, instead of falling back to the
hard-coded values in lib_get_sysinfo().
Tested with a multiboot enhanced version of FILO.
Change-Id: I22cf9e3ec0075aff040390bd177c5cd22d439b81
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18350
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Implement the argc/argv passing as described in coreboot’s payload API:
http://www.coreboot.org/Payload_API
While at it, give the code some love by not needlessly trashing register
values.
Change-Id: Ib830f2c67b631b7216843203cefd55d9bb780d83
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Simplify the code by directly using the arguments on the stack as base
pointer relative memory references, instead of loading them into
intermediate registers first.
Make it more robust by preserving all callee saved registers mandated by
the C calling convention (and only those), namely EBP, EBX, ESI and EDI.
Don't assume anything about the register state when the called function
returns -- beside the segment registers and the stack pointer to be
still the same as before the call.
Change-Id: I383d6ccefc5b3d5cca37a1c9b638c231bbc48aa8
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18335
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
According to coreboot’s payload API [1], the called payload should be
able to return a value via %eax. Support this by changing the prototype
of start_main() and pass on the return value of main() to the caller
instead of discarding it.
[1] https://www.coreboot.org/Payload_API
Change-Id: I8442faea19cc8e04487092f8e61aa4e5cba3ba76
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18334
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
According to coreboot’s payload API [1] the argc value should be passed
at stack offset 0x10, so we need to push a dummy value to comply to the
API.
[1] https://www.coreboot.org/Payload_API
Change-Id: Id20424185a5bf7e4d94de1886a2cece3f3968371
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The pointer to write the return value to is in %ecx, not %eax. Writing
to (%eax) leads to memory corruptions as %eax holds the return value,
e.g. would write zero to address zero for a "successful" returning
payload.
Change-Id: I82df27ae89a9e3d25f479ebdda2b50ea57565459
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18332
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
According to coreboot’s payload API [1] the magic value passed to the
payload should be 0x12345678, not 12345678. Fix that.
[1] https://www.coreboot.org/Payload_API
Change-Id: I10a7f7b1a4aec100416c5e7e4ba7f8add10ef5c5
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: https://review.coreboot.org/18331
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
3 out of 4 architectures currently zero out the payload BSS in early
assembly code, which is pointless since the code loading the payload has
already done that (with a more efficient memset). ARM64 has never had
any code like this and can run just fine without it. This also defeats
the new optimization of moving the heap out of the BSS, since all three
implementations assume that everything between _edata and _end is BSS.
We should just take this out.
Change-Id: I45cd2dabd94da43ff0f77e990f11c877cee6cda1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16091
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The ARM64 MMU code maintains a list of used ranges, to avoid mapping the
DMA buffer over the coreboot tables and things like that. Unfortunately,
the overlap with ranges in that list is checked with
(start1 >= start2 && start1 <= end2) || (end1 >= start2 && end1 <= end2)
which is not a full overlap check and misses the case where the second
region is completely contained within the first. This patch replaces
that code with a properly vetted primitive from Stack Overflow.
BRANCH=none
BUG=chrome-os-partner:54416
TEST=Observe how Kevin recovery screen now gets drawn at 10x the speed.
Change-Id: I7e2706426762794e160d743bbfc40da1e26eee12
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15974
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Some exceptions (like from calling a NULL function pointer) are easier
to narrow down with a dump of the call stack. Let's take a page out of
ARM32's book and add that feature to ARM64 as well. Also change the
output format to two register columns, to make it easier to fit a whole
exception dump on one screen.
Applying to both coreboot and libpayload and syncing the output format
between both back up.
Change-Id: I19768d13d8fa8adb84f0edda2af12f20508eb2db
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14931
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If a framebuffer is already configured by coreboot, libpayload's
MMU tables didn't mark its memory DMAable (unlike when libpayload
set up its own framebuffer memory).
BRANCH=none
BUG=chrome-os-partner:52826
TEST=depthcharge's recovery screen is not corrupted anymore on kevin
Change-Id: I228a861b3fdcf1298a3cfa0a054214c78ed55e70
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 889e8358a0f2f504abd9910549aa68f3992bb4e8
Original-Change-Id: I7ba79151ccc1eb605f82e1869a74b539a6be5e99
Original-Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/341092
Reviewed-on: https://review.coreboot.org/14685
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This allows to accommodate different platforms' default
configurations, memory configuration is fine tuned later during boot
process.
BUG=chrome-os-partner:51537
BRANCH=none
TEST=none yet, the full stack of patches boots fine on EVB
Change-Id: I39da4ce247422f67451711ac0ed5a5e1119ed836
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 97a9a71ade4df8a501043f9ae58463a3135e2a4f
Original-Change-Id: I39da4ce247422f67451711ac0ed5a5e1119ed836
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/332384
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/13914
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This will allow more payloads to use the standard linker script
instead of implementing their own.
Change-Id: Ie60120769829f427ceb722109d85859b61dbde31
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14074
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8b74cbf6bdde32c90ad0510e14e899711269e57f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14075
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When CONFIG_LP_TIMER_RDTSC is enabled honor the TSC information
exported in the coreboot tables as the cpu_khz frequency. That
allows get_cpu_speed() not to be called which currently relies
on the 8254 PIT. As certain x86 platforms allow that device
to be optional or turned off for power saving reasons, allow
a path where get_cpu_speed() is no longer called. Additionally,
this approach also allows the libpayload to not duplicate logic
that already exists in coreboot.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=Confirmed in payload TSC frequency is honored instead of
using get_cpu_speed().
Change-Id: Ib8993afdfb49065d43de705d6dbbdb9174b6f2c4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13671
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Set XN bit of block upper attribute to device memory in mmu. CPU may
speculatively prefetch instructions from device memory, but the IO
subsystem of some implementation may not support this operation. Set
this attribute to device memory mmu entries can prevent CPU from
prefetching device memory.
BRANCH=none
BUG=none
TEST=build and booted to kernel on oak-rev3 with dcm enabled.
Change-Id: I52ac7d7c84220624aaf6a48d64b9110d7afeb293
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7b01a4157cb046a5e75ea7625060a602e7a63c3c
Original-Change-Id: Id535e990a23b6c89123b5a4e64d7ed21eebed607
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302301
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
coreboot has no CREDITS file.
Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11514
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds support to enable a linker workaround to a hardware
erratum on some early Cortex-A53 revisions. Since the linker option was
added very recently, we use xcompile to test whether the toolchain
supports it first. It is also guarded by a Kconfig since only a few
ARM64 SoCs will need this and it incurs a performance penalty.
BRANCH=none
BUG=none
TEST=Turned it on or off for Smaug and confirmed that it (dis)appeared
in verbose make output accordingly.
Change-Id: I01c9642d3cf489134645f0db6f79f1c788ddb00d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 57128785760c4dfa32d6e6d764756443a9323cb7
Original-Change-Id: Ia5dd124f484e38460d75fb864304e7e8b18d16b7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294745
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11403
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
To allow a payload to define its own libpayload_init_default_cbfs_media,
default implementation needs to be defined weakly.
BUG=none
BRANCH=tot
TEST=dumped a cbfs file from depthcharge cli on jerry
Change-Id: Ice73ae5a63dfd49e79c0eeb92d4eade016d61c39
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1f308177fffb0d525fdb50f8d024568bb9025352
Original-Change-Id: I4721139aea3169c62c10a2a26582bd9277e4cb83
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/283061
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10783
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Without this, gdb_enter() is not defined.
Change-Id: I067dce371ee817d6ac77387fcbe42a9a7deb6438
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10755
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
There is no measurable performance impact, but
this positively impacts the memory used by payloads.
Change-Id: Ib2bdba4a7bf2a4c2391a20b3225bbb44422d3194
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10751
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This will make the code work with the different styles
of Kconfig (emit unset bools vs don't emit unset bools)
Roughly, the patch does this, and a little bit of fixing up:
perl -pi -e 's,ifdef (CONFIG_LP_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]`
perl -pi -e 's,ifndef (CONFIG_LP_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]`
Change-Id: Ib8a839b056a1f806a8597052e1b571ea3d18a79f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10711
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
libpayload is the only Kconfig based project under
the coreboot umbrella that is using Config.in as its
name for Kconfig config files. Rename that to Kconfig
as on the other projects for consistency.
Change-Id: I1c69ec13582d88409384b492484535dcc5e1ad20
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10520
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current arm64 MMU interface is difficult to use in pre-RAM
environments. It is based on the memranges API which makes use of
malloc(), and early stages usually don't have a heap. It is also built
as a one-shot interface that requires all memory ranges to be laid out
beforehand, which is a problem when existing areas need to change (e.g.
after initializing DRAM).
The long-term goal of this patch is to completely switch to a
configure-as-you-go interface based on the mmu_config_range() function,
similar to what ARM32 does. As a first step this feature is added
side-by-side to the existing interface so that existing SoC
implementations continue to work and can be slowly ported over one by
one. Like the ARM32 version it does not garbage collect page tables that
become unused, so repeated mapping at different granularities will
exhaust the available table space (this is presumed to be a reasonable
limitation for a firmware environment and keeps the code much simpler).
Also do some cleanup, align comments between coreboot and libpayload for
easier diffing, and change all error cases to assert()s. Right now the
code just propagates error codes up the stack until it eventually
reaches a function that doesn't check them anymore. MMU configuration
errors (essentially just misaligned requests and running out of table
space) should always be compile-time programming errors, so failing hard
and fast seems like the best way to deal with them.
BRANCH=None
BUG=None
TEST=Compile-tested rush_ryu. Booted on Oak and hacked MMU init to use
mmu_config_range() insted of memranges. Confirmed that CRCs over all page
tables before and after the change are equal.
Change-Id: I93585b44a277c1d96d31ee9c3dd2522b5e10085b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f10fcba107aba1f3ea239471cb5a4f9239809539
Original-Change-Id: I6a2a11e3b94e6ae9e1553871f0cccd3b556b3e65
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/271991
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10304
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
1. change mmu granule size from 64KB to 4KB
2. correct level 1 translation table creation logic
3. automatically calculate granule size related macros
BRANCH=none
BUG=none
TEST=boot to kernel on oak board
Change-Id: Ic62c7863dff53f566b82b68ff1d1ad9ec5d0698d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e5de7d942e42a8202fb879ce64b871864b1b9d38
Original-Change-Id: I78d7838921fa82a670e18ddc2de6d766dc7a2146
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/266010
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/10010
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
arch_program_segment_loaded ensures that the program segment loaded is
synced back from the cache to PoC. dcache_flush_all on arm64 does not
guarantee PoC in case of MP systems. Thus, it is important to track
and sync back all the required segments using
arch_program_segment_loaded.
BUG=chrome-os-partner:38231
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt on smaug
Change-Id: Ic6fcc7e5e0cccbab317950f8abab0c494041d19a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 284e3784854f764159b64286cea366c66b6bce2c
Original-Change-Id: I5c35b9aa2ae9b5c1f2fcdef40ffb1cde7f49cc1a
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/263327
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9904
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to not duplicate the instruction cache invalidation
sequence provide a common routine to perform the necessary
actions. Also, use it in the appropriate places.
BUG=chrome-os-partner:38231
BRANCH=None
TEST=Compiles successfully for smaug and boots kernel
Change-Id: I1d311dbc70bf225f35d60bb10d8d001065322b3a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8ab015156713eb7531378edbd1d779522681d529
Original-Change-Id: I8da7002c56139f8f82503484bfd457a7ec20d083
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/263326
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9903
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:38222
BRANCH=None
TEST=Compiles successfully and boots kernel
Change-Id: I6e1e841d84d1a73e5c726143aeba76af933e81a1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 59861a2700407b9e6a6209fbc45543c127b50b4b
Original-Change-Id: I256d07a41bec83037f2b61a9350f903119d8c101
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/263325
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9902
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
size_t is an unsigned type and as such is a bad choice for a counting
down loop counter.
BRANCH=all
BUG=none
TEST=editing cli command line does not cause hangs any more
Change-Id: I0502553b5e2143052345edeb205a01558fccd9b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1c171f739497fcd26589976676ab94b23cd7ee8b
Original-Change-Id: I4aa38379ac356114fc91a32cced2fa45a00a09d6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262714
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Tested-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9891
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The WG (write gate) bit in C0_EBase allows the upper two bits of
the exception base address to be set to something other than 2'b10,
thus allowing it to be relocated out of the traditional KSEG{0,1}
range. Since we're not using the segmentation features introduced
by EVA to relocate the unmapped segments, the exception vectors
should remain in KSEG0. Don't set the WG bit so that the upper
two bits of the exception base (2'b00, because of the identity
mapping) are ignored and we execute the exception vectors out of
KSEG0.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio.
Change-Id: Ie8b4eb6e41a328e7055736c9e3f6ff5ec83b9e13
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5b002f5ae71c7729e467d4fe3fd8db187e15dea
Original-Change-Id: Id8b930db1e7a68f52dd61be4dfa9edaee2bebf7d
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246697
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9822
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add helper macros to convert between physical addresses and KSEG{0,1}
addresses. Also get rid of the virt_to_{bus,phys}_offset variables
as these are fixed values.
As nobody seems to be using getpagesize() on MIPS, no need to keep
virtual.c.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio.
Change-Id: Ia26c8eae53eb8f860747a6b321363776841d1a94
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c422b02e9a2a20d130913b1cfb835ad74c39ddca
Original-Change-Id: I9476cd225a08534830c700cba7bf9d3ef871757e
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/247190
Reviewed-on: http://review.coreboot.org/9821
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use bus_to_virt() to convert the physical address of the DMA
coherent region to an address in KSEG1 which is suitable for
device memory accesses.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio.
Change-Id: If382feda66f6d829f8b3548ab263cf603cab2e9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a88a175f6d6db81d3154fb5dd31a44363ab94653
Original-Change-Id: I9ad6435495df2c71d8f81a782f1c3dfcfd4aeb28
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246696
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9818
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Now that coreboot has identity-mapped DRAM, use base address 0 (KUSEG)
instead of 0x80000000 (KSEG0).
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio.
Change-Id: I39845250a1b8cea6e5360efce16770751ffce13d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c1cbc1d7f6873c0be30d4206a2030f3b468acf24
Original-Change-Id: I76d98664f1bca73ae8acc9f545e68de9173c3cab
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246695
Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9817
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There was a recent patch by Deepa Dinamani applied to coreboot's
cache.c which fixed a bug that occurred when icache is on but dcache
is off ("arch: armv7: Fix cache sync instructions."). Although this
bug is not likely to be encountered by the time libpayload is run,
it's worth applying it to keep things in sync.
BUG=none
BRANCH=none
TEST=n/a since we have icache and dcache enabled on all ARM platforms
when libpayload is run.
Change-Id: I83d9f96acb702975585e5d47c90e2ddaca488f6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 31f985b58ac9227684fbe27481129ba01fd3ab8a
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I4ab0d97ef3a97dcd0fa96e10273c3b32486e0b40
Original-Reviewed-on: https://chromium-review.googlesource.com/243276
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9737
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Paging code is tricky and figuring out what is wrong with it can be a
pain. This patch tries to ease the burden by giving a little more
information for prefetch and data aborts, dumping the Instruction Fault
Address Register (IFAR), Instruction Fault Status Register (IFSR) and
Auxiliary Instruction Fault Status Register (AIFSR) or the respective
Data registers. These contain additional information about the cause of
the abort (internal/external, write or read, fault subtype, etc.) and
the faulting address.
BUG=None
TEST=I have read through enough imprecise asynchronous external abort
reports with this patch that I learned the bit pattern by heart.
Change-Id: If1850c4a6df29b1195714ed0bdf025e51220e8ab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf3b4924121825a5ceef7e5c14b7b307d01f8e9c
Original-Change-Id: I56a0557d4257f40b5b30c559c84eaf9b9f729099
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of forcing boards to have DMA region below 4GiB, provide
Kconfig option DMA_LIM_EXCL that a board can use to set the upper
limit in MiB units on the address range reserved by DMA. By default,
this value is 0x1000 i.e. 4GiB limit on the DMA upper address.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush. Default value is seen as 0x1000.
Change-Id: Ie35d3844a0989486ae022f8922fdd4c9d7d57fb4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6716cf312a103bc0440a558fc43c8c77869816e3
Original-Change-Id: I3ecbb4ec90995ab1568cb0924d5ce9467492697d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245250
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8800
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The raw_write_sctlr_current() cannot be used in mmu_disable() because
it pushes some registers to cached stack, and then just after cache
disabled, the value was gone.
BRANCH=none
BUG=none
TEST=build and boot on mt8173-evb
Change-Id: I512405b7917f27d16bdd3c51d9459827ad714e67
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aafe64922cc4cd01ecb099db106d04538e3e57ff
Original-Change-Id: I0dda8518d14c46fae1fe76e3629bd4ee81c1e0ee
Original-Signed-off-by: HC Yen <hc.yen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240323
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8799
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Allow read/write to registers at a given el. Also, make read/write
registers at current el call this newly added function.
BRANCH=none
BUG=none
TEST=build and boot on mt8173-evb
Change-Id: Id69f0fdc07193c5c7e997712f0cd99de6f41510b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c091917babc39d9ab997f51f81b486c9aa900c24
Original-Change-Id: I0944946642066b88331e497a92388e74e86902d0
Original-Signed-off-by: HC Yen <hc.yen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/240322
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8798
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The framebuffer structure lives in the coreboot tables. Those
tables have a checksum calculation applied over all the entries.
Therefore, one shouldnot be modifying fields within the coreboot
table entries because the calculated checksum would be wrong.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=On ryu, confirmed dev screen still works as well as cbmem utility
once booted.
Change-Id: I93830a8efe98aa848f2b0f8388688de0e93b2f82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6026ca5ad0254c14c30412882dc63550656c7d16
Original-Change-Id: Ic9c164ded03d10d6f6f3ce15e9b38b1f6ce61a91
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230471
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8797
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Allocate noncacheable memory for frame buffer and save base
address to sys_libinfo.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Change-Id: I19a8079616376dc7c1a8ecdbd7499c2553b8c6c3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cebb5650167264902548339bb1a2b428f3b7f4ed
Original-Change-Id: I7bfbfefb92001632ce3d572a50e46188795c4ab8
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/226404
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8796
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is important since mmu is disabled during the post_sysinfo_mmu_setup call
and calling printf can cause unaligned access.
BUG=None
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt with console_init
Change-Id: I5ef72ee449fdcf30186f97485cc532d6c56b2c5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 688ef3856d0502d057c9543ee7763601156e6385
Original-Change-Id: Ie376e394d084edd6c999fc9edde79f15a0264e7b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222664
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8795
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Provide a function to obtain a new memrange with requested properties (type,
size, alignment, max_addr and other restrictions) from the set of available
memranges passed in coreboot table. One user of this function would be getting
memrange for dma, another one would be framebuffer.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: Ic5a63ca2dca6c71f4ca2d77e2e2c8180d32a38e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3cd75756e1405e044c029f2878bfcc9c8c962bdf
Original-Change-Id: I187d73a4d55d3c6f49afbe9852901672d25de8dc
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222110
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8794
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
1. keep functions and objects used entirely within mmu.c as static.
2. DMA region finding needs to terminate. Therefore, the next address
to be attempted needs to be less then the current end address.
3. Ensure mmu_ranges passed to mmu_init_ranges_from_sysinfo() has
0 entries marked as used.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Booted ryu with RAM hole above cbmem tables below 4GiB.
Change-Id: I71a9cb89466978aa63fca5d8bee97b8af75ea206
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 66518fd86e676bbddf52e9d9afdd76d72c8e2222
Original-Change-Id: I5cb4e5009359cb04c4e1b5fe60845f80fbdff02c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221725
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8793
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
What this change does:
1) Initialize limited page tables as soon as we jump into libpayload. Basically
two ranges are initialized. One is for the BASE_ADDRESS and other is for the
coreboot_tables. With page tables initialized and MMU enabled, we jump into
code to parse coreboot tables.
2) Once coreboot tables are parsed and we have complete picture of the memory,
we perform a complete page table initialzation and enable MMU and then jump to
payload.
Additionally, we also:
1) Initialize DMA memory on our own depending upon the memory map. It ensures
that the DMA buffer is placed in 32-bit memory.
CQ-DEPEND=CL:216826
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and we are able to start execution of libpayload in
EL2 and reach kernel login prompt
Change-Id: I8a6203e465868bc2a3e5cc377e108f36cc58e2fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7695bb7afe34ea460282125a0be440e8994b01e4
Original-Change-Id: Ie0f47b7759d4ac65a6920f7f2f7502b889afda6d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216824
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8792
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Adds support for initializing mmu, setting up dma areas and enabling mmu based
on the memranges passed on in the coreboot tables.
CQ-DEPEND=CL:216826
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully
Change-Id: Id41a4255f1cd45a9455840f1eaa53503bd6fef3f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f2c6676bf51fcd85b61e9e08a261634a78137c4c
Original-Change-Id: I217bc5a5aff6a1fc0809c769822d820316d5c434
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216823
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8791
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Libpayload should be able to setup its own dma areas and not depend on coreboot
tables for passing this information. This patch and next allow libpayload to
setup dma areas while performing mmu_init
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and dma areas are setup properly with the mmu init patch
Change-Id: I5f6fd19a957c7626a2bbe6b826c8987e64ed248f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4f3552b8d3439a8b12d1e0b15ef67dcb14b8c96a
Original-Change-Id: I44d9f394fa349abd7182c4ba10f1eaefd6e4fdaa
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216822
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8789
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully
Change-Id: I12e7cdaf07c1bc4802a04dadd85384939b5a67e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c454a3d60b0e087df79de4fd9cff09596ae12ca5
Original-Change-Id: Iec82d56ae4a5f1ac6243afef1f453de3905d869c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216821
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8788
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
By default we dont want to use the special DC instruction. Thus getting rid of
the DONT_USE_DC macro and enabling code appropriately in memset.S
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully and memset works fine for mmu init
Change-Id: Icb3193f4f0d122726dcdacbdcacbf53eba30e235
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 54f639ef2348acab54e32b18f6826a67bf52bc14
Original-Change-Id: Id89ec2c1731d21496eca617a3c03abaf48062908
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216820
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8787
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully
Change-Id: I7a3dc9420fa85fa8f7ab70f0f55b200f432d3240
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 20c89d5df653ad65ad6d8ecc4c26de4c5e447564
Original-Change-Id: Ibd801ef1d777d306f35dde3c2b120af41d8f27e4
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216819
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8786
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Allow more flexibility by reading and writing to system registers at current
EL. Instead of specifying what _ELx register to write to, code can specify
_current.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles and boots to kernel on ryu
Change-Id: Id38b675bfe67ca1e25f8c268192114e3f0bee800
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6d4d07e26fc964dc3aaebfe03db59596d90093e9
Original-Change-Id: Ic1d9e18e6fc016a04f17621a148e62d6cbd04ce7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214577
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8785
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add library helpers to access standard arm64 registers. This library also
provides functions to directly read/write register based on current el. So, rest
of the code doesnt need to keep checking the el and call appropriate function
based on that.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Libpayload and depthcharge compile successfully for ryu
Change-Id: Ibc0ca49f158362d4b7ab2045bf0fbd58ada79360
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ca6da580cb51b4c23abdaf04fee2785e5780510
Original-Change-Id: I9b63e04aa26a98bbeb34fdef634776d49454ca8d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214575
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8784
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31634
BRANCH=None
TEST=test_exc generates and handles exceptions properly
Change-Id: If3ecab93be6d02942b52960ec97edc687bedf64b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bba2caae0bd436ba9e5215f5d8606ce8c4987c98
Original-Change-Id: I4abe8a0e426eab2532852179dbb32505353cd0a1
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214609
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8783
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Initialize exception stack to be able to handle exceptions properly
BUG=chrome-os-partner:31634
BRANCH=None
TEST=test_exc successfully generates and handles exceptions on ryu
Change-Id: I19163fae080b9ac3297a7ffe404446e427bf9a1c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 99157687c5178c3b3eb79f5589343db1b2b4cc86
Original-Change-Id: I4dc83ff32c1665e22127bf0b1e6d4c6b45c07a4a
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214608
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8782
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Compiles sucessfully and hello libpayload seen on screen
Change-Id: If312e005e306f7f70138aa27d2ef5b39620ec91e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6d6aa84d7255d33e085f12c609f32309521ff58e
Original-Change-Id: I73f888a7b8aa0065c1ca0bf7857c445cc5678cdc
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214073
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8781
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA and bring up board; works as
expected
BRANCH=none
Change-Id: I368494f388b82969dda0ce73a38824791efce616
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e4c2bbcbdbcf706062724cffe2d5f15953468ace
Original-Change-Id: Id5c9b1d65c6ec87f2aba06995dc940c50afb041f
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245386
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add CPU frequency corresponding to SOC.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; behaves as expected.
BRANCH=none
Change-Id: I05458070a15c6cf1ef0fc2104715a63902a38887
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4afe332bcc41afeb7e31e918e345c3336f7dc604
Original-Change-Id: I55b788faf7984bafc2509cac69867a772c7cb863
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241427
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8853
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The default string functions work with multiple of 4 bytes
(sizeof(unsinged long)); MIPS will use LW/SW instructions
for these operations and if the source and destination
addresses are not aligned it will trigger an exception.
Therefore, this implementation does all data access operations
per byte, because there is no guarantee that the provided
strings are properly aligned.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; behaves as expected
BRANCH=none
Change-Id: I05b43673deb954f022d12cb9c3d7baac26be2a34
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e13b3d31726404abd8c8e5c8780d3d3e16e032d
Original-Change-Id: I456e312eb6b7fee2eff10e461af7f578aed07648
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241885
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the basic build infrastructure and architectural support
required to build for targets using the MIPS architecture.
This will require the addition of cache maintenance.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA with Depthcharge as payload;
successfully executed payload.
BRANCH=none
Change-Id: I75cfd0536860b6d84b53a567940fe6668d9b2cbb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 758c8cb9a6846e6ca32be409ec5f7a888ac9c888
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Change-Id: I0b9af983bf5032335a519ce2510a0b3aca082edf
Original-Reviewed-on: https://chromium-review.googlesource.com/219740
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8741
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Compiles successfully
Change-Id: If89e7a537e6f0321ef43641c924a8ef057f51147
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1f39cdbf68b674ef9b65441038ec79548145a88d
Original-Change-Id: Ie9904bf8abfa5ce1d87a586e5b08eb320793942f
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217821
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8790
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It turns out that CB_TAG_ACPI_GNVS is handled in both x86 specific and
common coreboot table parsing code. The MRC cache case used only by
x86 is handled in the common code.
This patch restores sanity and moves processing to where it belongs.
BRANCH=none
BUG=none
TEST=verified that arm and x86 targets build.
Change-Id: Iaddaa3380725be6d08a51a96c68b70522531bafe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0afae893d5027026cb666cd46e054aeae4e71f83
Original-Change-Id: I2c114a8469455002c51593cb8be80585925969a7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225457
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8752
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are three instances of coreboot.c in libpayload. for x86, arm
and arm64 architectures. The arm and arm64 instances are exactly the
same. The differences with the x86 instance are as follows:
- a very slightly different set of coreboot table tags is parsed (one
tag added and two removed)
- instead of checking a fixed address if it contains the coreboot
table, the x86 version iterates over two address ranges.
This patch refactors the module, leaving architecture specific
processing in arch subdirectories and moving the common code into
libc.
BUG=none
TEST=none yet
Change-Id: I1c7ad6f74e3498e93df78086ba0ff708c08e0a5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3df209d58ebd5c5b1cf0168f6466e065d1ef3598
Original-Change-Id: I6dfed73f6ba5939f692d0f98d2774c0e0312a25f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210770
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8750
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Make board ID value supplied in the coreboot table available to the
bootloader on all three architectures.
BUG=chrome-os-partner:30489
TEST=none yet
Change-Id: I6c2d39e94212b55650929d7d99896581d23f789d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 723e4a600a5d3a03e960169b04f8322f6dd2486b
Original-Change-Id: I7847bd9fe2d000a29c7ae95144f4868d926fb198
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210430
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8730
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add stub implementation for gdb arm64 support. Currently all functions are kept
empty to enable proper compilation of depthcharge and libpayload. As we get more
clear about context management and stuff, we can add details for gdb as well.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I0a8729671ab0764d424c0e3d50af86433d05b1e8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204877
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit d24e5c26b56a9882b3450b1e4988b56c3d73efd1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9b7d3d7060dd827ef4a46865e0f9a2b4e063d07d
Reviewed-on: http://review.coreboot.org/8125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I2569cadf2d34f7211892f100ba715486d824b921
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204611
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit dd9e06e41da043a48b469a011c010a10a1a3b25a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I37fbc8cfea0870e7167ffa47dd63fc548e18c82e
Reviewed-on: http://review.coreboot.org/8124
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Correct function names to make them consistent with depthcharge calling
convention
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I0fd8f7f929c3fe268710362d1fc19f9e15c4a23b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204423
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 36008e728b840d85bb98225c7bb1420b993181de)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4b446da8f2c273385ee885c4870966e18ba2a7a6
Reviewed-on: http://review.coreboot.org/8122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is required for proper compilation of libpayload and depthcharge
BUG=None
BRANCH=None
TEST=libpayload compiles successfully for rush
Original-Change-Id: I305b58b978fd335e20abd7664c3ee2a6c1ea8384
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204422
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit eef115c2371c6f7259bf808e0448f24a5b3491ab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icd6a5b8a0bdb125de4913fc82be8cb2a5aef5dc9
Reviewed-on: http://review.coreboot.org/8120
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds the ability to attach a GDB host through the UART to a
running payload. Libpayload implements a small stub that can parse and
respond to the GDB remote protocol and provide the required primitives
(reading/writing registers/memory, etc.) to allow GDB to control
execution.
The goal of this implementation is to be as small and uninvasive as
possible. It implements only the minimum amount of primitives required,
and relies on GDB's impressive workaround capabilities (such as
emulating breakpoints by temporarily replacing instructions) for the
more complicated features. This way, a relatively tiny amount of code on
the firmware side opens a vast range of capabilities to the user, not
just in debugging but also in remote-controlling the firmware to change
its behavior (e.g. through GDBs ability to modify variables and call
functions).
By default, a system with the REMOTEGDB Kconfig will only trap into GDB
when executing halt() (including the calls from die_if(), assert(), and
exception handlers). In addition, payloads can manually call gdb_enter()
if desired. It will print a final "Ready for GDB connection." on the
serial, detach the normal serial output driver and wait for the commands
that GDB starts sending on attach.
Based on original implementation by Gabe Black <gabeblack@chromium.org>.
BUG=chrome-os-partner:18390
TEST=Boot a GDB enabled image in recovery mode (or get it to hit a
halt()), close your terminal, execute '<toolchain>-gdb --symbols
/build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory
~/trunk/src/third_party/coreboot/payloads/libpayload --directory
~/trunk/src/platform/depthcharge --directory
~/trunk/src/platform/vboot_reference --ex "target remote
<cpu_uart_pty>"' and behold the magic.
(You can also SIGSTOP your terminal's parent shell and the terminal
itself, and SIGCONT them in reverse order after GDB exits. More
convenient wrapper tools to do all this automatically coming soon.)
Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202563
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b
Reviewed-on: http://review.coreboot.org/8119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There have been leaks of GPL code into libpayload for a while now, for
new features or improvements that require third party code with no
adequate alternative among BSD-licensed software. It seems silly and
counter-productive to keep holding back features and performance
improvements from libpayload for a use-case (proprietary payloads) that
doesn't even seem to be implemented anywhere to date. Open-source
payloads should not need to suffer to appease commercial ones.
Instead, this patch introduces a new Kconfig option to explicitly allow
inclusion of GPL code. It will use Kconfig dependencies and/or Makefile
rules to ensure that no GPL code can end up in the final payload if that
option is unset, allowing proprietary payloads to keep working with the
existing BSD-licensed feature set. New features and patches (that are
sufficiently separate and self-contained to allow guarding through this
config option) can choose whether to import GPL code, and need to depend
on this option if they do.
Also clean up all (known) existing uses of GPL code to depend on the new
option, add some recent third-party imports to the LICENSES file, and
relicense the selfboot.c files to BSD with permission of the author.
BUG=chrome-os-partner:24957
TEST=Compiled Falco and Nyan_Big both with and without the new option,
disassembled output binaries to ensure that memcpy() looks as expected.
Original-Change-Id: I6e3a75b1a8e46291c75a876844c7a01f7d3f2a0e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203513
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit d8e5a9fdf583b5ac861f34baea6a16c4d8536512)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I446fef028264c793b946dd9f765e446bf708b4db
Reviewed-on: http://review.coreboot.org/8118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch makes some slight changes to the exception hook interface.
The old code provides a different handler hook for every exception
type... however, in practice all those hook functions often need to look
very similar, so this creates more boilerplate than it removes. The new
interface just allows for a single hook with the exception type passed
as an argument, and the consumer can signal whether the exception was
handled through the return value. (Right now this still only supports
one consumer, but it could easily be extended to walk through a list of
hooks if the need arises.)
Also move the excepton state from an argument to a global. This avoids a
lot of boilerplate since some consumers need to change the state from
many places, so they would have to pass the same pointer around many
times. It also removes the false suggestion that the exception state was
not global and you could have multiple copies of it (which the exception
core doesn't support for any architecture).
On the ARM side, the exception state is separated from the exception
stack for easier access. (This requires some assembly changes, and I
threw in a few comments and corrected the immediate sigils from '$' to
the official '#' while I'm there.) Since the exception state is now both
stored and loaded through an indirection pointer, this allows for some
very limited reentrance (you could point it to a different struct while
handling an exception, and while you still won't be able to return to
the outer-level exception from there, you could at least swap out the
pointer and return back to System Mode in one go).
BUG=chrome-os-partner:18390
TEST=Made sure normal exceptions still get dumped correctly on both
archs.
Original-Change-Id: I5d9a934fab7c14ccb2c9d7ee4b3465c825521fa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202562
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 97542110f0b385b9b8d89675866e65db8ca32aeb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
*** Squashed to prevent build failures. ***
libpayload: align arm64 with new exception handling model
The exception handling was previously updated, however the
arm64 changes raced with hat one. Make the arm64 align with
the new model. Without these changes compilation will fail.
BUG=None
BRANCH=None
TEST=Can build libpayload for rush.
Original-Change-Id: I320b39a57b985d1f87446ea7757955664f8dba8f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204402
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0080df41b311ef20f9214b386fa4e38ee54aa1a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9a0bb3848cf5286f9f4bb08172a9f4a15278348e
Reviewed-on: http://review.coreboot.org/8117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Basic support for arm64 is enabled in libpayload.
Features added:
1) mem* operations in assembly.
2) Basic exception handling and support for testing exceptions.
3) Caching support.
Tested with arm64-generic board compilation.
BUG=None
BRANCH=None
TEST=Compilation successful
Original-Change-Id: I4e86301f9c6383abc078e2b70071fb84bd6e4741
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/187067
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit a70d13f3d225535843ab352290eab2e1ec7a9b4b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie3affe6a2bdd4fed3058de739d4c6aa573e5b251
Reviewed-on: http://review.coreboot.org/8063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This adds some assembly code to clear .bss segment. It might have been
already cleared by the loader, but it is not guaranteed. This also
helps when the program is loaded by the debugger.
BUG=none
TEST=observed that .bss is now initialized when the program is
restarted. Verified correct boundaries of the segment.
Original-Change-Id: I0aed0070da53881e4cf8c27049459040c006e765
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201784
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit c89ecee5ddfc33a438d4d1926d3756a48f3c2576)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic0c33d2a8ad22cd23b3ccb73c603cb14ae2aab29
Reviewed-on: http://review.coreboot.org/8060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
ARM processors save the PC value in the Link Register when they handle
and exception, but they store it with an added offset (depending on the
exception type). In order to make crashes easier to read and correctly
support more complicated handlers in libpayload, this patch adjusts the
saved PC value on exception entry to correct for that offset.
(Note: The value that we now store is what ARM calls the "preferred
return address". For most exceptions this is the faulting instruction,
but for software interrupts (SWI) it is the instruction after that. This
is the way most programs like GDB expect the stored PC address to work,
so let's leave it at that.)
Numbers taken from the Architecture Reference Manual at the end of
section B1.8.3.
BRANCH=none
BUG=chrome-os-partner:18390
TEST=Provoked a data abort and an undefined instruction in both coreboot
and depthcharge, confirmed that the PC address was spot on.
Original-Change-Id: Ia958a7edfcd4aa5e04c20148140a6148586935ba
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199844
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 4a914d36bb181d090f75b1414158846d40dc9bac)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib63ca973d5f037a879b4d4d258a4983160b67dd6
Reviewed-on: http://review.coreboot.org/7992
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I93e5e2488ddd616c91769beb1acd96f8ebd7d505
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/7971
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I073b9bd30f4f9b0cdf6c45c10e4549889342d5f3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/7970
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I7209ceaf4ad686bbb07eb0c6105f77834d5511fd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/7969
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The calling convention of payload entry function is different by architecture.
For example, X86 takes no arguments and ARM needs first param to be a
cb_header_ptr*.
To help payloads load and execute other payloads easily and correctly, we should
provide the selfboot() function in libpayload, using same prototype as defined
in coreboot environment.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: I8f1cb2c0df788794b2f6f7f5500a3910328a4f84
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199503
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 1e916cf021ce68886eb9668982c392eadedc7b7e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7279ef27f49ef581d25a455dd8f1f2f7f1ba58cb
Reviewed-on: http://review.coreboot.org/7907
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Some EABI conformant toolchains like GCC need additional functions like raise.
To prevent payloads adding arch-specific implementations everywhere, we should
provide the default version in libpayload.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: Id1e3c29590aa5881aefd944a7551949ce9a47b8f
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199686
(cherry picked from commit 395810c4b744dbb720050f79a2c1a30e81464554)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2e1d8c8cb519f8e788c22d081132d23b49b8f822
Reviewed-on: http://review.coreboot.org/7906
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Turns out that when you clear 28 bits starting with bit 3, you leave bit
31 standing. Ooops...
This shouldn't really matter since that bit is reserved/SBZ in CLIDR
anyway, but it's still nice to fix it. This whole thing should really be
an AND for clarity anyway in my opinion.
Bug found in upstream NetBSD (who would've thought...).
BUG=None
TEST=Still boots.
Change-Id: Ic826e82d58fd1ce984971afea3dfa9296f746d9f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193300
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d270c0ec18b74b272451c456cbf07e99d95896cb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
TEST=Booted nyan in normal and recovery mode. Created a map, filled it with some
chars, then verified they can be read from the pointer returned.
BUG=chrome-os-partner:25587
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Id1f1be4f6d2d5734d87bf3452d4806d0fe3fda88
Original-Reviewed-on: https://chromium-review.googlesource.com/188894
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 7fda3885f51c8d383585a80e99ab3df9c789d872)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6255d11396c87f40b0ae12ceab0fd152f2478529
Reviewed-on: http://review.coreboot.org/7658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use the SPSR to extract and inject CPSR values when an exception happens and
pass that information to exception hooks.
The register structure GDB expects when using its remote protocol has a spot
for the CPSR.
BUG=None
TEST=Built and booted on link, nyan.
BRANCH=None
Original-Change-Id: Id950fb09d72fb0f81e4eef2489c0849ce5dd8aca
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/180253
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8e7014f24a580f84c91fa7b0369dfa922918adcc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I49357fb6a65edeff7a9a48d54254308a6b0efdb7
Reviewed-on: http://review.coreboot.org/7657
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
To support a GDB stub, it will be necessary to trap various exceptions which
will be used to implement breakpoints, single stepping, etc.
BUG=None
TEST=Built and booted on Link with hooks installed and saw that they
triggered when exceptions occurred. Built and booted on nyan.
BRANCH=None
Original-Change-Id: Iab659365864a3055159a50b8f6e5c44290d3ba2b
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/179602
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8db0897b1ddad600e247cb4df147c757a8187626)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5e7f724b99988cd259909dd3bd01166fa52317ec
Reviewed-on: http://review.coreboot.org/7656
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
To find the coreboot tables, the payload has historically searched for their
signature in a predefined region of memory. This is a little clumsy on x86,
but it works because you can assume certain regions are RAM. Also, there are
areas which are set aside for the firmware by convention. On x86 there's a
forwarding entry which goes in one of those fairly small conventional areas
and which points to the CBMEM area at the end of memory.
On ARM there aren't areas like that, so we've left out the forwarding entry and
gone directly to CBMEM. RAM may not start at the beginning of the address space
or go to its end, and that means there isn't really anywhere fixed you can put
the coreboot tables. That's meant that libpayload has to be configured on a
per board basis to know where to look for CBMEM.
Now that we have boards that don't have fixed amounts of memory, the location
of the end of RAM isn't fixed even on a per board level which means even that
workaround will no longer cut it.
This change makes coreboot pass the location of the coreboot tables to
libpayload using r0, the first argument register. That means we'll be able to
find them no matter where CBMEM is, and we can get rid of the per board search
ranges.
We can extend this mechanism to x86 as well, but there may be more
complications and it's less necessary there. It would be a good thing to do
eventually though.
BUG=None
TEST=Built and booted on nyan. Changed the size of memory and saw that the
payload could still find the coreboot tables where before it couldn't. Built
for pit, snow, and big.
BRANCH=None
Original-Change-Id: I7218afd999da1662b0db8172fd8125670ceac471
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185572
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ca88f39c21158b59abe3001f986207a292359cf5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iab14e9502b6ce7a55f0a72e190fa582f89f11a1e
Reviewed-on: http://review.coreboot.org/7655
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch changes the ENTRY() macro in asm.h to create a new section
for every assembler function, thus providing dcache_clean/invalidate_all
and friends with the same --gc-sections goodness that our C functions
have. This requires a few minor changes of moving around data (to make
sure it ends up in the right section) and changing some libgcc functions
(which apparently need to have two names?), but nothing serious.
(You may note that some of our assembly functions have data, sometimes
even writable, within the same .text section. This has been this way
before and I'm not looking to change it for now, although it's not
totally clean. Since we don't enforce read-only sections through paging,
it doesn't really hurt.)
BUG=None
TEST=Nyan and Snow still boot. Confirm dcache_invalidate_all is not
output into any binary anymore since no one actually uses it.
Original-Change-Id: I247b29d6173ba516c8dff59126c93b66f7dc4b8d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/183891
(cherry picked from commit 4a3f2e45e06cc8592d56c3577f41ff879f10e9cc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieaa4f2ea9d81c5b9e2b36a772ff9610bdf6446f9
Reviewed-on: http://review.coreboot.org/7451
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
These drivers are needed right away and never really fit into depthcharge's
driver model anyway.
CQ-DEPEND=CL:194064
BUG=None
TEST=Built and booted nyan, link, and peach_pit and verified that timer values
in cbmem were reasonable. Built for nyan_big, nyan_blaze and daisy.
BRANCH=None
Original-Change-Id: Ia7953cfece57524262a6c7d6537082af7a00f4d6
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194058
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit f30a410f0a248c93bc34f5868af1596bf8ce3cdd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I782d20f3cd63210a87c712643c7a53753f5ef301
Reviewed-on: http://review.coreboot.org/7225
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
This patch changes several cache-related pieces to be cleaner, faster or
more correct. The largest point is removing the old
arm_invalidate_caches() function and surrounding bootblock code to
initialize SCTLR and replace it with an all-assembly function that takes
care of cache and SCTLR initialization to bring the system to a known
state. It runs without stack and before coreboot makes any write
accesses to be as compatible as possible with whatever state the system
was left in by preceeding code. This also finally fixes the dreaded
icache bug that wasted hundreds of milliseconds during boot.
Old-Change-Id: I7bb4995af8184f6383f8e3b1b870b0662bde8bd4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183890
(cherry picked from commit 07a35925dc957919bf88dfc90515971a36e81b97)
nyan_big: apply cache-related changes from nyan
This applies the same changes from 07a3592 that were applied to nyan.
Old-Change-Id: Idcbe85436d7a2f65fcd751954012eb5f4bec0b6c
Reviewed-on: https://chromium-review.googlesource.com/184551
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4af27f02614da41c611aee2c6d175b1b948428ea)
Squashed the followup patch for nyan_big into the original patch.
Change-Id: Id14aef7846355ea2da496e55da227b635aca409e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
(cherry picked from commit 4cbf25f8eca3a12bbfec5b015953c0fc2b69c877)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch switches every last part of Coreboot on ARM over to Thumb
mode: libpayload, the internal libgcc, and assorted assembly files. In
combination with the respective depthcharge patch, this will switch to
Thumb mode right after the entry point of the bootblock and not switch
back to ARM until the final assembly stub that jumps to the kernel.
The required changes to make this work include some new headers and
Makefile flags to handle assembly files (using the unified syntax and
the same helper macros as Linux), modifying our custom-written libgcc
code for 64-bit division to support Thumb (removing some stale old files
that were never really used for clarity), and flipping the general
CFLAGS to Thumb (some more cleanup there as well while I'm at it).
BUG=None
TEST=Snow and Nyan still boot.
Original-Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/182212
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5f65c17cbfae165a95354146ae79e06c512c2c5a)
Conflicts:
payloads/libpayload/include/arm/arch/asm.h
src/arch/arm/Makefile.inc
src/arch/arm/armv7/Makefile.inc
*** There is an issue with what to do with ramstage-S-ccopts, and
*** will need to be covered in additional ARM cleanup patches.
Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6930
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
