| Age | Commit message (Collapse) | Author |
|---|
|
Paging code is tricky and figuring out what is wrong with it can be a
pain. This patch tries to ease the burden by giving a little more
information for prefetch and data aborts, dumping the Instruction Fault
Address Register (IFAR), Instruction Fault Status Register (IFSR) and
Auxiliary Instruction Fault Status Register (AIFSR) or the respective
Data registers. These contain additional information about the cause of
the abort (internal/external, write or read, fault subtype, etc.) and
the faulting address.
BUG=None
TEST=I have read through enough imprecise asynchronous external abort
reports with this patch that I learned the bit pattern by heart.
Change-Id: If1850c4a6df29b1195714ed0bdf025e51220e8ab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf3b4924121825a5ceef7e5c14b7b307d01f8e9c
Original-Change-Id: I56a0557d4257f40b5b30c559c84eaf9b9f729099
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are three instances of coreboot.c in libpayload. for x86, arm
and arm64 architectures. The arm and arm64 instances are exactly the
same. The differences with the x86 instance are as follows:
- a very slightly different set of coreboot table tags is parsed (one
tag added and two removed)
- instead of checking a fixed address if it contains the coreboot
table, the x86 version iterates over two address ranges.
This patch refactors the module, leaving architecture specific
processing in arch subdirectories and moving the common code into
libc.
BUG=none
TEST=none yet
Change-Id: I1c7ad6f74e3498e93df78086ba0ff708c08e0a5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3df209d58ebd5c5b1cf0168f6466e065d1ef3598
Original-Change-Id: I6dfed73f6ba5939f692d0f98d2774c0e0312a25f
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210770
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8750
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Make board ID value supplied in the coreboot table available to the
bootloader on all three architectures.
BUG=chrome-os-partner:30489
TEST=none yet
Change-Id: I6c2d39e94212b55650929d7d99896581d23f789d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 723e4a600a5d3a03e960169b04f8322f6dd2486b
Original-Change-Id: I7847bd9fe2d000a29c7ae95144f4868d926fb198
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210430
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/8730
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds the ability to attach a GDB host through the UART to a
running payload. Libpayload implements a small stub that can parse and
respond to the GDB remote protocol and provide the required primitives
(reading/writing registers/memory, etc.) to allow GDB to control
execution.
The goal of this implementation is to be as small and uninvasive as
possible. It implements only the minimum amount of primitives required,
and relies on GDB's impressive workaround capabilities (such as
emulating breakpoints by temporarily replacing instructions) for the
more complicated features. This way, a relatively tiny amount of code on
the firmware side opens a vast range of capabilities to the user, not
just in debugging but also in remote-controlling the firmware to change
its behavior (e.g. through GDBs ability to modify variables and call
functions).
By default, a system with the REMOTEGDB Kconfig will only trap into GDB
when executing halt() (including the calls from die_if(), assert(), and
exception handlers). In addition, payloads can manually call gdb_enter()
if desired. It will print a final "Ready for GDB connection." on the
serial, detach the normal serial output driver and wait for the commands
that GDB starts sending on attach.
Based on original implementation by Gabe Black <gabeblack@chromium.org>.
BUG=chrome-os-partner:18390
TEST=Boot a GDB enabled image in recovery mode (or get it to hit a
halt()), close your terminal, execute '<toolchain>-gdb --symbols
/build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory
~/trunk/src/third_party/coreboot/payloads/libpayload --directory
~/trunk/src/platform/depthcharge --directory
~/trunk/src/platform/vboot_reference --ex "target remote
<cpu_uart_pty>"' and behold the magic.
(You can also SIGSTOP your terminal's parent shell and the terminal
itself, and SIGCONT them in reverse order after GDB exits. More
convenient wrapper tools to do all this automatically coming soon.)
Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202563
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b
Reviewed-on: http://review.coreboot.org/8119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There have been leaks of GPL code into libpayload for a while now, for
new features or improvements that require third party code with no
adequate alternative among BSD-licensed software. It seems silly and
counter-productive to keep holding back features and performance
improvements from libpayload for a use-case (proprietary payloads) that
doesn't even seem to be implemented anywhere to date. Open-source
payloads should not need to suffer to appease commercial ones.
Instead, this patch introduces a new Kconfig option to explicitly allow
inclusion of GPL code. It will use Kconfig dependencies and/or Makefile
rules to ensure that no GPL code can end up in the final payload if that
option is unset, allowing proprietary payloads to keep working with the
existing BSD-licensed feature set. New features and patches (that are
sufficiently separate and self-contained to allow guarding through this
config option) can choose whether to import GPL code, and need to depend
on this option if they do.
Also clean up all (known) existing uses of GPL code to depend on the new
option, add some recent third-party imports to the LICENSES file, and
relicense the selfboot.c files to BSD with permission of the author.
BUG=chrome-os-partner:24957
TEST=Compiled Falco and Nyan_Big both with and without the new option,
disassembled output binaries to ensure that memcpy() looks as expected.
Original-Change-Id: I6e3a75b1a8e46291c75a876844c7a01f7d3f2a0e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203513
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit d8e5a9fdf583b5ac861f34baea6a16c4d8536512)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I446fef028264c793b946dd9f765e446bf708b4db
Reviewed-on: http://review.coreboot.org/8118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch makes some slight changes to the exception hook interface.
The old code provides a different handler hook for every exception
type... however, in practice all those hook functions often need to look
very similar, so this creates more boilerplate than it removes. The new
interface just allows for a single hook with the exception type passed
as an argument, and the consumer can signal whether the exception was
handled through the return value. (Right now this still only supports
one consumer, but it could easily be extended to walk through a list of
hooks if the need arises.)
Also move the excepton state from an argument to a global. This avoids a
lot of boilerplate since some consumers need to change the state from
many places, so they would have to pass the same pointer around many
times. It also removes the false suggestion that the exception state was
not global and you could have multiple copies of it (which the exception
core doesn't support for any architecture).
On the ARM side, the exception state is separated from the exception
stack for easier access. (This requires some assembly changes, and I
threw in a few comments and corrected the immediate sigils from '$' to
the official '#' while I'm there.) Since the exception state is now both
stored and loaded through an indirection pointer, this allows for some
very limited reentrance (you could point it to a different struct while
handling an exception, and while you still won't be able to return to
the outer-level exception from there, you could at least swap out the
pointer and return back to System Mode in one go).
BUG=chrome-os-partner:18390
TEST=Made sure normal exceptions still get dumped correctly on both
archs.
Original-Change-Id: I5d9a934fab7c14ccb2c9d7ee4b3465c825521fa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202562
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 97542110f0b385b9b8d89675866e65db8ca32aeb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
*** Squashed to prevent build failures. ***
libpayload: align arm64 with new exception handling model
The exception handling was previously updated, however the
arm64 changes raced with hat one. Make the arm64 align with
the new model. Without these changes compilation will fail.
BUG=None
BRANCH=None
TEST=Can build libpayload for rush.
Original-Change-Id: I320b39a57b985d1f87446ea7757955664f8dba8f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204402
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0080df41b311ef20f9214b386fa4e38ee54aa1a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9a0bb3848cf5286f9f4bb08172a9f4a15278348e
Reviewed-on: http://review.coreboot.org/8117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds some assembly code to clear .bss segment. It might have been
already cleared by the loader, but it is not guaranteed. This also
helps when the program is loaded by the debugger.
BUG=none
TEST=observed that .bss is now initialized when the program is
restarted. Verified correct boundaries of the segment.
Original-Change-Id: I0aed0070da53881e4cf8c27049459040c006e765
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201784
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit c89ecee5ddfc33a438d4d1926d3756a48f3c2576)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic0c33d2a8ad22cd23b3ccb73c603cb14ae2aab29
Reviewed-on: http://review.coreboot.org/8060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
ARM processors save the PC value in the Link Register when they handle
and exception, but they store it with an added offset (depending on the
exception type). In order to make crashes easier to read and correctly
support more complicated handlers in libpayload, this patch adjusts the
saved PC value on exception entry to correct for that offset.
(Note: The value that we now store is what ARM calls the "preferred
return address". For most exceptions this is the faulting instruction,
but for software interrupts (SWI) it is the instruction after that. This
is the way most programs like GDB expect the stored PC address to work,
so let's leave it at that.)
Numbers taken from the Architecture Reference Manual at the end of
section B1.8.3.
BRANCH=none
BUG=chrome-os-partner:18390
TEST=Provoked a data abort and an undefined instruction in both coreboot
and depthcharge, confirmed that the PC address was spot on.
Original-Change-Id: Ia958a7edfcd4aa5e04c20148140a6148586935ba
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199844
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 4a914d36bb181d090f75b1414158846d40dc9bac)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib63ca973d5f037a879b4d4d258a4983160b67dd6
Reviewed-on: http://review.coreboot.org/7992
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The calling convention of payload entry function is different by architecture.
For example, X86 takes no arguments and ARM needs first param to be a
cb_header_ptr*.
To help payloads load and execute other payloads easily and correctly, we should
provide the selfboot() function in libpayload, using same prototype as defined
in coreboot environment.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: I8f1cb2c0df788794b2f6f7f5500a3910328a4f84
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199503
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 1e916cf021ce68886eb9668982c392eadedc7b7e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I7279ef27f49ef581d25a455dd8f1f2f7f1ba58cb
Reviewed-on: http://review.coreboot.org/7907
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Some EABI conformant toolchains like GCC need additional functions like raise.
To prevent payloads adding arch-specific implementations everywhere, we should
provide the default version in libpayload.
BUG=none
TEST=emerge-nyan libpayload # pass
BRANCH=none
Original-Change-Id: Id1e3c29590aa5881aefd944a7551949ce9a47b8f
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199686
(cherry picked from commit 395810c4b744dbb720050f79a2c1a30e81464554)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2e1d8c8cb519f8e788c22d081132d23b49b8f822
Reviewed-on: http://review.coreboot.org/7906
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Turns out that when you clear 28 bits starting with bit 3, you leave bit
31 standing. Ooops...
This shouldn't really matter since that bit is reserved/SBZ in CLIDR
anyway, but it's still nice to fix it. This whole thing should really be
an AND for clarity anyway in my opinion.
Bug found in upstream NetBSD (who would've thought...).
BUG=None
TEST=Still boots.
Change-Id: Ic826e82d58fd1ce984971afea3dfa9296f746d9f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193300
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d270c0ec18b74b272451c456cbf07e99d95896cb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
TEST=Booted nyan in normal and recovery mode. Created a map, filled it with some
chars, then verified they can be read from the pointer returned.
BUG=chrome-os-partner:25587
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Id1f1be4f6d2d5734d87bf3452d4806d0fe3fda88
Original-Reviewed-on: https://chromium-review.googlesource.com/188894
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 7fda3885f51c8d383585a80e99ab3df9c789d872)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6255d11396c87f40b0ae12ceab0fd152f2478529
Reviewed-on: http://review.coreboot.org/7658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use the SPSR to extract and inject CPSR values when an exception happens and
pass that information to exception hooks.
The register structure GDB expects when using its remote protocol has a spot
for the CPSR.
BUG=None
TEST=Built and booted on link, nyan.
BRANCH=None
Original-Change-Id: Id950fb09d72fb0f81e4eef2489c0849ce5dd8aca
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/180253
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8e7014f24a580f84c91fa7b0369dfa922918adcc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I49357fb6a65edeff7a9a48d54254308a6b0efdb7
Reviewed-on: http://review.coreboot.org/7657
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
To support a GDB stub, it will be necessary to trap various exceptions which
will be used to implement breakpoints, single stepping, etc.
BUG=None
TEST=Built and booted on Link with hooks installed and saw that they
triggered when exceptions occurred. Built and booted on nyan.
BRANCH=None
Original-Change-Id: Iab659365864a3055159a50b8f6e5c44290d3ba2b
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/179602
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8db0897b1ddad600e247cb4df147c757a8187626)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5e7f724b99988cd259909dd3bd01166fa52317ec
Reviewed-on: http://review.coreboot.org/7656
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
To find the coreboot tables, the payload has historically searched for their
signature in a predefined region of memory. This is a little clumsy on x86,
but it works because you can assume certain regions are RAM. Also, there are
areas which are set aside for the firmware by convention. On x86 there's a
forwarding entry which goes in one of those fairly small conventional areas
and which points to the CBMEM area at the end of memory.
On ARM there aren't areas like that, so we've left out the forwarding entry and
gone directly to CBMEM. RAM may not start at the beginning of the address space
or go to its end, and that means there isn't really anywhere fixed you can put
the coreboot tables. That's meant that libpayload has to be configured on a
per board basis to know where to look for CBMEM.
Now that we have boards that don't have fixed amounts of memory, the location
of the end of RAM isn't fixed even on a per board level which means even that
workaround will no longer cut it.
This change makes coreboot pass the location of the coreboot tables to
libpayload using r0, the first argument register. That means we'll be able to
find them no matter where CBMEM is, and we can get rid of the per board search
ranges.
We can extend this mechanism to x86 as well, but there may be more
complications and it's less necessary there. It would be a good thing to do
eventually though.
BUG=None
TEST=Built and booted on nyan. Changed the size of memory and saw that the
payload could still find the coreboot tables where before it couldn't. Built
for pit, snow, and big.
BRANCH=None
Original-Change-Id: I7218afd999da1662b0db8172fd8125670ceac471
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185572
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ca88f39c21158b59abe3001f986207a292359cf5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iab14e9502b6ce7a55f0a72e190fa582f89f11a1e
Reviewed-on: http://review.coreboot.org/7655
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch changes the ENTRY() macro in asm.h to create a new section
for every assembler function, thus providing dcache_clean/invalidate_all
and friends with the same --gc-sections goodness that our C functions
have. This requires a few minor changes of moving around data (to make
sure it ends up in the right section) and changing some libgcc functions
(which apparently need to have two names?), but nothing serious.
(You may note that some of our assembly functions have data, sometimes
even writable, within the same .text section. This has been this way
before and I'm not looking to change it for now, although it's not
totally clean. Since we don't enforce read-only sections through paging,
it doesn't really hurt.)
BUG=None
TEST=Nyan and Snow still boot. Confirm dcache_invalidate_all is not
output into any binary anymore since no one actually uses it.
Original-Change-Id: I247b29d6173ba516c8dff59126c93b66f7dc4b8d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/183891
(cherry picked from commit 4a3f2e45e06cc8592d56c3577f41ff879f10e9cc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieaa4f2ea9d81c5b9e2b36a772ff9610bdf6446f9
Reviewed-on: http://review.coreboot.org/7451
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This patch changes several cache-related pieces to be cleaner, faster or
more correct. The largest point is removing the old
arm_invalidate_caches() function and surrounding bootblock code to
initialize SCTLR and replace it with an all-assembly function that takes
care of cache and SCTLR initialization to bring the system to a known
state. It runs without stack and before coreboot makes any write
accesses to be as compatible as possible with whatever state the system
was left in by preceeding code. This also finally fixes the dreaded
icache bug that wasted hundreds of milliseconds during boot.
Old-Change-Id: I7bb4995af8184f6383f8e3b1b870b0662bde8bd4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183890
(cherry picked from commit 07a35925dc957919bf88dfc90515971a36e81b97)
nyan_big: apply cache-related changes from nyan
This applies the same changes from 07a3592 that were applied to nyan.
Old-Change-Id: Idcbe85436d7a2f65fcd751954012eb5f4bec0b6c
Reviewed-on: https://chromium-review.googlesource.com/184551
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4af27f02614da41c611aee2c6d175b1b948428ea)
Squashed the followup patch for nyan_big into the original patch.
Change-Id: Id14aef7846355ea2da496e55da227b635aca409e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
(cherry picked from commit 4cbf25f8eca3a12bbfec5b015953c0fc2b69c877)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch switches every last part of Coreboot on ARM over to Thumb
mode: libpayload, the internal libgcc, and assorted assembly files. In
combination with the respective depthcharge patch, this will switch to
Thumb mode right after the entry point of the bootblock and not switch
back to ARM until the final assembly stub that jumps to the kernel.
The required changes to make this work include some new headers and
Makefile flags to handle assembly files (using the unified syntax and
the same helper macros as Linux), modifying our custom-written libgcc
code for 64-bit division to support Thumb (removing some stale old files
that were never really used for clarity), and flipping the general
CFLAGS to Thumb (some more cleanup there as well while I'm at it).
BUG=None
TEST=Snow and Nyan still boot.
Original-Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/182212
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5f65c17cbfae165a95354146ae79e06c512c2c5a)
Conflicts:
payloads/libpayload/include/arm/arch/asm.h
src/arch/arm/Makefile.inc
src/arch/arm/armv7/Makefile.inc
*** There is an issue with what to do with ramstage-S-ccopts, and
*** will need to be covered in additional ARM cleanup patches.
Change-Id: I80c04281e3adbf74f9f477486a96b9fafeb455b3
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6930
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch fixes the remaining few bugs in our shiny new cache iteration
by set/way/level algorithm to actually make it work: It makes it start
from cache level 0 (previously it would always start at LoC and be
"done" instantly), fixes up the two shifts that isolate the set bits at
the end (which didn't seem to account for the fact that the first shift
affects the second), and throws an S bit on that last shift so that it
actually affects the conditionals after it.
In addition, also moves the next_level block to the top so that we can
share (and thus eliminate) some code at initialization, and turns the
whole thing into a thrice-instantiated macro to create functions that
fit our existing interface.
Change-Id: I1338a589cbb37d74ea6e7a3d4f67ff827e24edbe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183879
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 6d94f8330191c316fe093ddb5288329453da8a4b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6932
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The memcpy/memset/memmove assembly implementations have been taken from
U-Boot, which originally got them from Linux. I turns out that they are
actually not that bad, but they could use an update. This patch pulls in
the current Linux upstream versions of those files, removing some old
U-Boot cruft such as checking whether the two pointers in a memcpy() are
equal (really now?) or side-stepping the R8 register because it was used
for special purposes. It also returns to the good old Linux
ENTRY/ENDPROC macros since we have them now anyway, and straightens out
the W() macro in preparation for unified thumb support.
Change-Id: I138af269b423bef0a237759ac29f1ee58ca206a0
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182179
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 777127997bde5785b21d422d0b6eb04c4328b478)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6918
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
libgcc/macros.h contains some useful assembly macros that are common in
Linux kernel code and facilitate things such as unified ARM/THUMB
assembly. This patch moves it to a more general place where it can be
used by other code as well.
Change-Id: If68e8930aaafa706c54cf9a156fac826b31bb193
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182178
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit a780670def94a969829811fa8cf257f12b88f085)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6917
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This is needed by depthcharge on ARM if coreboot is loading its
ramstage from the RW section of the ROM.
Change-Id: I96c6c04a0cee39854b45f2eda169e93461da0694
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/176757
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit cf26be4cb527b0fc4212d401a8c77ceb1c7992d0)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6906
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
"Hey guys, I have this awesome idea! How about we put a huge array
filled with 0xa5 into the data segment of our uncompressed romstage
for no particular reason? Give our SPI driver something to do so it
doesn't get too bored, you know?"
Guess it pays off to just hexdump our image and sanity-check it top to
bottom every once in a while...
Also reduces the size because 8K is crazy just to print a bunch of
registers (256 bytes ought to be enough for anybody).
Old-Change-Id: Icec0a711a1b5140d2ebcd98338ec638a4b6262fa
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176762
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 61c360a1c3f445535c9ff383a389e643cfe4527c)
arm: Remove exception_test()
The exception_test() mechanism might have been useful when exceptions
were first implemented, but now that they are pretty stable it's really
not necessary anymore (especially not on every single boot in production
Chromebooks). It forces a simple unaligned access, and as we start
having exceptions in stages that might not have paging turned on yet,
it's better to remove that completely.
Also removed the duplicated implementations of SCTLR-stuff and switched
to the existing ones in cache.h.
Old-Change-Id: I85e66269f5e2f2dfd3e8aaaa18441493514b62f8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177101
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d0706b848572fbea26e0e432ec5827503b9603c9)
Squashed 2 exception related commits.
Change-Id: Id2c115ee39a0732c375472afc0194436e2f5e069
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes the -ffixed-r8 CFLAG from the coreboot and libpayload
Makefiles. This seems to be a relic from U-Boot, which uses that
register to keep it's global data structure pointer. There's no reason
for us to throw away a perfectly fine register on this already pretty
constrained architecture.
Also removed a config.h inclusion from the Makefile because that should
really be done inside the C files.
Change-Id: Ia176c0f323c1be07cddf88fa5488788786a27cdf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177110
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2a81112abde284ba09020db6afa363169911a7f6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6880
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
nyan: Clock setup.
Reviewed-on: https://chromium-review.googlesource.com/172106
(cherry picked from commit 3697b6454c0aceebcf735436de90ba2441c9b7b1)
tegra124: Call into the mainboard bootblock init if one exists.
Reviewed-on: https://chromium-review.googlesource.com/172581
(cherry picked from commit 3a0cd48a0d1a9ce6b32ed614cd81fb81f5f82aec)
nyan: Add a mainboard specific bootblock.
Reviewed-on: https://chromium-review.googlesource.com/172582
(cherry picked from commit a83d065d660a26fe71ed79879c25f84a1b669f69)
nyan: tegra124: Redestribute the clock code between the mainboard and soc.
Reviewed-on: https://chromium-review.googlesource.com/172583
(cherry picked from commit ea703137fc37befa7d5a65afc982e298a0daca1b)
nyan: Initialize the i2c pins and controllers.
Reviewed-on: https://chromium-review.googlesource.com/172584
(cherry picked from commit 9c10a3074ef834688fea46c03551c2e3e54e44a8)
nyan: Initialize the PMIC.
Reviewed-on: https://chromium-review.googlesource.com/172585
(cherry picked from commit f6be8b0e607e05b73b5e4a84afcf04c879eee88a)
tegra124: add a chip.h and use it in NYAN
Reviewed-on: https://chromium-review.googlesource.com/172773
(cherry picked from commit 4dd5f1f091f2dcae5ce38203bb86c62994609f8f)
tegra: Reorder GPIO register accesses to avoid glitching
Reviewed-on: https://chromium-review.googlesource.com/172730
(cherry picked from commit 61bedbf0f839e19b284d21af2ad10f2ff15e17d5)
tegra: Turn GPIO wrappers into macros to make them easier to write
Reviewed-on: https://chromium-review.googlesource.com/172731
(cherry picked from commit 94550fdfa5a8005d2e6a313041de212ab7ac470c)
tegra: Change GPIO functions to allow variable arguments
Reviewed-on: https://chromium-review.googlesource.com/172916
(cherry picked from commit e95ccd984f718a04b6067ff6ad5049a2cd74466d)
tegra124: Implement starting up the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/172917
(cherry picked from commit 7c5169a197310e18a3df0f176c499669e3c2bda3)
tegra: Simplify the I2C constants.
Reviewed-on: https://chromium-review.googlesource.com/172953
(cherry picked from commit 130a07c86dfa5ba5ac4580f29db927c91f045c76)
tegra124: Fix SPI base addresses
Reviewed-on: https://chromium-review.googlesource.com/173322
(cherry picked from commit da808e46919ebd3b9f2377a5889f0d5f10b92357)
tegra124: Scrub the clock constants.
Reviewed-on: https://chromium-review.googlesource.com/172954
(cherry picked from commit 9305ff0696a6d556a97f928b8683770833a309a4)
tegra124: add DMA support
Reviewed-on: https://chromium-review.googlesource.com/172951
(cherry picked from commit 4d2a5a56b922ac37d2326d7b139697567aac37b8)
tegra124: add basic SPI driver
Reviewed-on: https://chromium-review.googlesource.com/172952
(cherry picked from commit 5f861f13c7fd2dd881f3cbd0f1b4d4a9994ce429)
tegra124: Add an assembly stub which is run first on the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/173541
(cherry picked from commit e142b9572a89f43fe984c4fc87e3203f380ff4de)
nyan: tegra124: Set up dynamic cbmem.
Reviewed-on: https://chromium-review.googlesource.com/173542
(cherry picked from commit b6e1a70103446abb5c3440f145617e6566879c6f)
tegra124: Add an soc.c which sets up the chip operations and memory resource.
Reviewed-on: https://chromium-review.googlesource.com/173543
(cherry picked from commit af49a5bd1f589cf053c4808510138aae26e20db4)
tegra124: extend chip.h to include video settings
Reviewed-on: https://chromium-review.googlesource.com/173600
(cherry picked from commit 87687633a2116f58fad7333b3b639cee9089ad29)
tegra124 and nyan: fill in the devicetree a bit more, add defines
Reviewed-on: https://chromium-review.googlesource.com/173684
(cherry picked from commit c107eaca3dea42be89f61690d0d6cb2181acb147)
tegra124: clean-ups for SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173599
(cherry picked from commit 1e2f9fd442ea336bf0663c3c8ea51f771e21beb7)
tegra124: add a #define for DMA alignment size
Reviewed-on: https://chromium-review.googlesource.com/173638
(cherry picked from commit f9dc2a8d8016fa7db974fb6cb01c3275e26832af)
tegra124: Add FIFO transmit functions to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173639
(cherry picked from commit 97e61f36ad96ce2f9b12a7ef765ee73d3f4285f7)
tegra124: clean-ups for DMA driver
Reviewed-on: https://chromium-review.googlesource.com/173598
(cherry picked from commit 750c0a5d6942748dd21f3a3f884ad94a561e86e0)
tegra124: early display and display code.
Reviewed-on: https://chromium-review.googlesource.com/173622
(cherry picked from commit 651c7ab96b1f136865e4673a120de7afc1218558)
tegra124: Move transfer size handling to spi_xfer()
Reviewed-on: https://chromium-review.googlesource.com/173680
(cherry picked from commit 4a9b7b47b3c09d70063ea843054ffef98f554621)
tegra124: strict error detection and reporting for SPI
Reviewed-on: https://chromium-review.googlesource.com/173681
(cherry picked from commit c056fa954e1dab40a56faec6c50385763a2eb010)
tegra124: add thread-friendly delays to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173648
(cherry picked from commit c1a321c8f61942801627f895c5db74c518e2aa8e)
Tegra124: Take the SPI1 controller out of reset and enable its clock.
Reviewed-on: https://chromium-review.googlesource.com/173787
(cherry picked from commit c026a3fb861e157f1e17a121fc2ef70b903f36f2)
tegra124: add two more clock setting values
Reviewed-on: https://chromium-review.googlesource.com/173772
(cherry picked from commit 7d79d7dd9f0c1fd7127a7ba41652d809ccff7a57)
nyan: Set up the ChromeOS related GPIOs and SPI bus 1 which goes to the EC.
Reviewed-on: https://chromium-review.googlesource.com/173788
(cherry picked from commit ff172bfe30f75983a1e8efa2ead0a4519583d0a8)
tegra124: Add some stub functions to the Tegra SPI driver.
Reviewed-on: https://chromium-review.googlesource.com/173789
(cherry picked from commit 8bc527aa4afd301c046b0e844c7fa400630af0d2)
tegra124: Build source files into the various stges needed by CONFIG_CHROMEOS.
Reviewed-on: https://chromium-review.googlesource.com/173790
(cherry picked from commit 86a6423b668ca912295c47d8c6e3ef6c6f8c6084)
nyan: Implement the code which reads GPIOs for ChromeOS.
Reviewed-on: https://chromium-review.googlesource.com/173791
(cherry picked from commit 4c394dfbce762574fc79edcb6e4ac6bf346e48a3)
nyan: Enable the CHROMEOS and ChromeOS EC related kconfig options.
Reviewed-on: https://chromium-review.googlesource.com/173792
(cherry picked from commit 2845a4487159aa4b1dba58d977f52c449574fc8e)
Tegra124: SDMMC: Take the SDMMC 3 and 4 out of reset and ungate their clocks.
Reviewed-on: https://chromium-review.googlesource.com/173793
(cherry picked from commit c238b87bcd9d35afd828476d6ee88322ac5d0f88)
tegra124: fix clear_fifo_status() in SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173738
(cherry picked from commit f415d2c0aaffc0f1a3592551a2db782d538f8f4f)
ARM: Include stdint.h in cpu.h.
Reviewed-on: https://chromium-review.googlesource.com/173774
(cherry picked from commit f1930faea3f14b2a2560a6c4058ef38532b6f1a6)
tegra124: When setting up the main CPU, set its CPSR appropriately.
Reviewed-on: https://chromium-review.googlesource.com/173775
(cherry picked from commit bc2ba9c15cfd22aeaca4f80b1d13a8b5e0178ead)
tegra124: fix wrong names in clk_rst.h
Reviewed-on: https://chromium-review.googlesource.com/173955
(cherry picked from commit 19dd9c85e4a3d1f77b23828bcbdd4bd8c2688b8d)
tegra124: Fix up the PLLX divider table.
Reviewed-on: https://chromium-review.googlesource.com/173778
(cherry picked from commit 3362cf3a7d6f5eaec879dda42323345922f6df17)
tegra124: clock: Get rid of cpcon and dccon.
Reviewed-on: https://chromium-review.googlesource.com/173779
(cherry picked from commit 08626ffac4a7e9ea3d4738af87e9e4cced7be2c7)
Tegra124: SPI: Set and unset CS in spi_claim_bus and spi_release_bus.
Reviewed-on: https://chromium-review.googlesource.com/173953
(cherry picked from commit a2df8f3a9c9c54c62d6ff37d3baff1d30ee6d355)
armv7: expose dcache_line_bytes() in cache API
Reviewed-on: https://chromium-review.googlesource.com/173975
(cherry picked from commit 6727f65702c7668fcb33848b4113bc3d3cc04e12)
libpayload: expose dcache_line_bytes() in ARM cache API
Reviewed-on: https://chromium-review.googlesource.com/174099
(cherry picked from commit 9387b02dff85b42944d95c3bccf59059c93fb4a9)
armv4: add a stub for dcache_line_bytes()
Reviewed-on: https://chromium-review.googlesource.com/173976
(cherry picked from commit 924f61ea895b9268c716791466637009bbac6469)
tegra124: Base early UART on CLK_M to enable debugging of PLL init code
Reviewed-on: https://chromium-review.googlesource.com/174339
(cherry picked from commit 8d9387432f0a0d9b257b040304238e543cced1aa)
tegra124: Add additional PLLs and redesign the divisor table
Reviewed-on: https://chromium-review.googlesource.com/174380
(cherry picked from commit f6a5f5c4562f1ca733505717c175be00413f2384)
Squashed 49 commits for tegra124/nyan that included a lot of churn on
different pieces.
Change-Id: I00e8f5b74e835e01b28ca2e9c4af3709c9363d56
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6869
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
|
