summaryrefslogtreecommitdiff
path: root/payloads/libpayload/Makefile
AgeCommit message (Collapse)Author
2022-01-15libpayload: Install vboot headers and add include paths to lpgccJakub Czapiga
New CBFS API uses commonlib/bsd/cbfs_serialized.h, which includes vboot's vb2_sha.h. And, because vboot's includes are not available in libpayload's installation directory nor in lpgcc paths, it was causing compilation errors. This patch fixes this issue. lpgcc will look for `vboot` directory like it is doing for `include` directory to create correct paths. However, if payload will be built using libpayload's build dir as a base, then vboot headers from 3rdparty/vboot will be used, as there is no way to pass VBOOT_SOURCE from makefile to lpgcc. Moreover, this patch moves VBOOT_SOURCE to the main Makefile to make it available for installation target, to install headers from vboot directory provided by caller. Change-Id: I68dd7e1545cfcaf24547d8a9fe289447c79da222 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reported-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-10libpayload: Enable vboot integrationJakub Czapiga
This patch introduces building and linking of 3rdparty/vboot with libpayload. VBoot can be enabled by setting CONFIG_LP_VBOOT_LIB. Moreover it can be configured to use either TPM or TPM 2.0 mode, and whether to use SHA256 processor extension instructions on x86. Change-Id: I2d9d766a461edaa0081041c020ecf580fd2ca64e Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-12-08libpayload/Makefile: Improve object files list creationJakub Czapiga
This patch ports some parts of main coreboot Makefile to the libpayload Makefile in order to improve object files creation. Moreover, the coreboot source files are now accessible an will be correctly compiled under libpayload build directory. Change-Id: If1280c0a3f7e99aad2ecf8a0379a98af31ccefc3 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2021-12-01libpayload: Add coreboot commonlib/bsd include pathJakub Czapiga
Make BSD part of the coreboot commonlib accessible to libpayload. Change-Id: I09f475d399ab785f3d3ffdb4b42950d2b397845e Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2021-10-18libpayload: Add unit-tests framework and first test caseJakub Czapiga
This commit adds a unit-tests framework ported from coreboot, and test for drivers/speaker. Usage of the unit-tests framework is same as for the coreboot one. Change-Id: Iaa94ee4dcdc3f74af830113813df0e8fb0b31e4f Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-10-11libpayload: Add mock architectureJakub Czapiga
Mock architecture can be used to build libpayload using host compiler. It can be enabled by setting ARCH_MOCK=y in the dotconfig. It sets LITTLE_ENDIAN=y, as most machines these days use little-endian CPUs. Libpayload will use HOSTCC as CC, HOSTLD as LD, etc. instead of tools provided by xcompile. Mock architecture configuration can be used by payloads for testing purposes. Thanks to it, tests can be architecture-independent, and can be executed without requiring compatible Kconfig options, e.g. ARCH_ARM64=y for ARM64 machine. However, one has to provide implementation for most architecture-specific functions present in arch/* directories. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: Ie3a6e6f6cad2f8a2e48a8e546d3b79c577653080 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-09-01libpayload: Move EXTRA_CFLAGS to enable option overrideJakub Czapiga
Before this patch EXTRA_CFLAGS were placed before many other options. This made overriding impossible even, when necessary. This patch moves EXTRA_CFLAGS to be placed after original CFLAGS, thus making option overriding possible. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: If8394b151696eee4bd736d2fb1ad340209e05fbb Reviewed-on: https://review.coreboot.org/c/coreboot/+/57181 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-13util/kconfig: Uprev to Linux 5.13's kconfigPatrick Georgi
This was originally several commits that had to be squashed into one because the intermediate states weren't able to build coreboot: - one to remove everything that wasn't our own code, leaving only regex.[ch], toada.c, description.md and Makefile.inc. - one to copy in Linux 5.13's scripts/kconfig and adapt Makefile.inc to make the original Makefile work again. - adapt abuild to use olddefconfig, simplifying matters. - apply patches in util/kconfig/patches. - Some more adaptations to the libpayload build system. The patches are now in util/kconfig/patches/, reverse applying them should lead to a util/kconfig/ tree that contains exactly the Linux version + our own 5 files. Change-Id: Ia0e8fe4e9022b278f34ab113a433ef4d45e5c355 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-01libpayload: Move .xcompile into $(obj)Nico Huber
Keep libpayload's xcompile in its build dir. While we are at it, align things with the top-level version. Having `.xcompile` in a central place led to race conditions when multiple payloads try to build their own libpayloads in parallel. Change-Id: I504e1862db79b368289867f7568c9169f27a1549 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-27Makefile: Remove romccElyes HAOUAS
Change-Id: I2fe7fa8b23da3b909adc2b8bce59304acfb5b807 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-11-20Remove MIPS architectureJulius Werner
The MIPS architecture port has been added 5+ years ago in order to support a Chrome OS project that ended up going nowhere. No other board has used it since and nobody is still willing or has the expertise and hardware to maintain it. We have decided that it has become too much of a mainenance burden and the chance of anyone ever reviving it seems too slim at this point. This patch eliminates all MIPS code and MIPS-specific hacks. Change-Id: I5e49451cd055bbab0a15dcae5f53e0172e6e2ebe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34919 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-30libpayload: handle special-class-handlers before sourcesArthur Heymans
This matches the coreboot makefile behavior. Change-Id: Iaada965de904cb03edd068fed8827643496292cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36439 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-16libpayload: Make libpayload compile using gnu11Raul E Rangel
This matches coreboot. BUG=b:76831439 TEST=emerge-grunt libpayload deptcharge chromeos-bootimage then booted image Change-Id: I3a3baa03e03a31e9e75b201ac4fa642505fc1d3a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-01-25libpayload: fix buildPatrick Georgi
When .xcompile doesn't already exist, building libpayload fails because the CC variable (et al) remain empty since .xcompile is only included after the variables coming from there are evaluated. Change-Id: I73f1cbced95afcff15839604fea5fd05d81bc3d3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18228 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-24build system: don't run xcompile or git for %clean/%config targetsPatrick Georgi
It takes a long time for no gain: We don't need to update the submodules, we don't need to fetch the revision, we don't need to find the compilers, when all we want to do is to manipulate the .config file or clean the build directory. Change-Id: Ie1bd446a0d49a81e3cccdb56fe2c43ffd83b6c98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18182 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-25libpayload: update junit.xml target, clean up outputMartin Roth
- Copy each config in configs/ to the junit_config, update each, in turn, and clean up when done. This avoids updating the saved config files and creating dirty files in git. - Use 'make olddefconfig' instead of 'yes "" | make oldconfig' - Update clean target to remove junit_config file - Update distclean target to remove junit.xml Change-Id: Ib023eb3197f2d8806c73c9c18464157ce3de958f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14164 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-09-10libpayload: Add missing autoconf dependencyNico Huber
With new version of kconfig we have to trigger [silent]oldconfig each time .config changed. We missed that, because config.h had no dependen- cies. Change-Id: I9f0dd8adbc3aa434a18cb4815b1ccbd1f6e7847b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11603 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-08-04libpayload: .xcompile target is an actual filePaul Kocialkowski
Marking .xcompile as PHONY implies triggering the xcompile script each time make is invoked. This is particularly problematic, especially when the script cannot find the crossgcc toolchains on its own and has to be fed XGCCPATH. Change-Id: Icb5ae82b210bca1ee9cf56d76130eefde481f81e Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11118 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-03libpayload: Allow for KBUILD_DEFCONFIG overridePaul Kocialkowski
In order to specify a defconfig to libpayload, one might want to declare KBUILD_DEFCONFIG in the make command line and run the defconfig target. Change-Id: I2ade6f4ff2f0b6478a0831158028ebc79b5daa81 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11112 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-09libpayload: Use top level xcompileStefan Reinauer
Instead of having a second copy that already within 2-3 days becamer quite outdated, use the same xcompile copy for coreboot and libpayload, as we do with Kconfig already. This requires a simple change to the top level xcompile to understand both CONFIG_COMPILER_GCC and CONFIG_LP_COMPILER_GCC (only one of them will occur at the same time) libpayload's .xcompile target was moved later so that it can make use of $(top) Change-Id: I44001067f551cd0776dd303cbaeaa40eb3d5c1db Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10863 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-06libpayload: architecture mapping is now done in xcompilePatrick Georgi
This helps the build system find i386 and mips compilers. Change-Id: I17d18019b556190f860d288e66f368f8d29ca24d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10803 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: drop LIBGCC_FILE_NAME variablePatrick Georgi
It's unused. If we need something like that, .xcompile provides it, and in a cross-platform and clang-aware way. Change-Id: Ic1bdc2e3e252d612a5b99ad4e8caebc5158a485f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10802 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06libpayload: defer including .xcompilePatrick Georgi
It needs to come after DOTCONFIG so that the compiler decision can be made. Change-Id: I5c6730ac58ab8731f07bb7c5161b2d0a59588e28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10801 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30libpayload: Makefile: Use variables defined for KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ia451e8250307ad1944cb0429bdfee4bdf18c706b Reviewed-on: http://review.coreboot.org/10712 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30libpayload: Drop duplicate copy of KconfigStefan Reinauer
It's perfectly fine to have one single copy of kconfig in the tree. Change-Id: Icfe32f0249dfc1c223009d6e7136462f8f8a7248 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10521 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-21libpayload: arch/mips: Add basic MIPS architecture supportIonela Voinescu
Add the basic build infrastructure and architectural support required to build for targets using the MIPS architecture. This will require the addition of cache maintenance. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA with Depthcharge as payload; successfully executed payload. BRANCH=none Change-Id: I75cfd0536860b6d84b53a567940fe6668d9b2cbb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 758c8cb9a6846e6ca32be409ec5f7a888ac9c888 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Change-Id: I0b9af983bf5032335a519ce2510a0b3aca082edf Original-Reviewed-on: https://chromium-review.googlesource.com/219740 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8741 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-01-09libpayload: Add support for arm64 in libpayloadFurquan Shaikh
Basic support for arm64 is enabled in libpayload. Features added: 1) mem* operations in assembly. 2) Basic exception handling and support for testing exceptions. 3) Caching support. Tested with arm64-generic board compilation. BUG=None BRANCH=None TEST=Compilation successful Original-Change-Id: I4e86301f9c6383abc078e2b70071fb84bd6e4741 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/187067 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit a70d13f3d225535843ab352290eab2e1ec7a9b4b) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie3affe6a2bdd4fed3058de739d4c6aa573e5b251 Reviewed-on: http://review.coreboot.org/8063 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2014-10-17libpayload: Don't use default path for kconfigNico Huber
libpayload's kconfig is totally incompatible with other kconfig versions, today. Using other versions just doesn't work any more, so don't use the overridable $(obj)/util/kconfig path. Choose a path that reflects the incompatibility: $(obj)/util/lp_kconfig, instead. This whole every-(sub)project-has-it's-own-patched-kconfig-version makes me really, really sad :'-( Change-Id: I964772f3323dc20aa7c1cc26a384a2fbca1dbb5e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/7061 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-09-08ARM: Generalize armv7 as arm.Gabe Black
There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2014-08-05libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig.Gabe Black
When libpayload header files are included in the payload itself, it's possible that the payloads config settings will conflict with the ones in libpayload. It's also possible for the libpayload config settings to conflict with the payloads. To avoid that, the libpayload config settings have _LP_ (for libpayload) added to them. The symbols themselves as defined in the Config.in files are still the same, but the prefix added to them is now CONFIG_LP_ instead of just CONFIG_. Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65303 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6427 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-01-26Revert "Makefile: Check $CC variable returned from xcompile is not empty."Alexandru Gagniuc
This reverts commit 1287d1cc80c52ff2598f2bae235fc42d8456f44a. This commit has the side-effect of making abuild fail, and as such is reverted until a safe solution can be found. Change-Id: Ib8cb78468c2922322b490e0b52c0bd24f3de7ef9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3269 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-01-23Makefile: Check $CC variable returned from xcompile is not empty.Andrew Wu
If xcompile can't find out suitable GCC compiler for i386/armv7, it will not set $CC_i386/$CC_armv7 variable. Makefile sets $CC variable from xcompile, and will print strange error messages when executing $CC program if $CC is empty. Add checking to avoid this problem. If $CC is empty, also delete invalid .xcompile file, so Make can recreate this file next time. Change-Id: Ia8d481d76ca52f3351cb99f05779d06947161c5d Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3905 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-11-26libpayload: Drop PowerPC architectureStefan Reinauer
This was never completed / working and we have the working ARMv7 port for an architecture template, so get rid of this dead code. Change-Id: Ic2c1267ee5546dd6e1b63220c263b2fa86c8ae33 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56065 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4235 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18libpayload: Fix the config file dependency in the Makefile templateGabe Black
The template had a dependency on config.h which was correct for coreboot, where this build system originally came from, but not for libpayload which uses the differently named libpayload-config.h, presumably to avoid colliding with a config.h used by the actual payload. Because libpayload-config.h is now effectively a dependency of everything, it doesn't have to be added piecemeal in Makefile.inc. Change-Id: I01f20d363cb1393fa1cdcf0dc916670db90294e9 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2763 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: ARCH-$(CONFIG_ARCH_ARMV7) was defined twice, make one POWERPCGabe Black
Change-Id: Ia85a7cd6a0b85119cce6b2f9c42a7fc31ffd9f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2654 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: Initial ARMv7 portStefan Reinauer
This compiles, but it's not tested yet. Change-Id: I2f73a814649aa36c39af3e77cefd8a968671f5c0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2035 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-07-03Fixes to the libpayload build systemPatrick Georgi
- its Makefile is part of the libpayload project - fix conversion bug in powerpc's Makefile.inc Change-Id: I84f2da092c3733ea7d0f232cb3768078cf13dfd5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/79 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-06-30Use coreboot build system for libpayload, too.Patrick Georgi
This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2010-07-29Resolved the bug of filo+libpayload building. The bug is if libpayload is ↵Cai Bai Yin
installed before filo load "make -C ../libpayload/Makefile DEST=**", it would not install correctly. Also, distclean removes .xcompile now. Signed-off-by: Cai Bai Yin <caibaiyin.pku@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5672 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-24Incomplete implementation of libpci's (of pciutils) interface.Patrick Georgi
No pciutils code was harmed in its production - this code was written by looking at flashrom's expectations, so there's no license pollution. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5645 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-22Change the libpayload "make install" default destination to be the source ↵Cai Bai Yin
directory. Libpayload is not a runtime library and has many different configurations for different payloads, so doesn't really belong in /opt. Signed-off-by: Cai Bai Yin <caibaiyin.pku@gmail.com> Acked-By: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5639 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-20install libpayload.ldscript on libpayload "make install"Stefan Reinauer
to make coreinfo happy. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5466 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-20Allow easy libpayload compilation using xcompile.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25allow libpayload to completely build out of tree.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5293 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-21This change adds PPC support to libpayload, and hooks it up in the buildPatrick Georgi
process. The PPC support is still stubbed, with commented out x86 code as guide line for an implementor. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4293 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-25libpayload: Fix immediate rebuild after a cleanMart Raudsepp
After running make clean, most of build/ directory gets deleted. It is (re)created in the "prepare" make target, but that was libpayload.a dependency after the $OBJS, while OBJS building already needs to dump its created object files there. Simply rearrange the make target dependencies to get at least "make clean;make" working. Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee> Acked-by: Jordan Crouse <jordan@cosmicpenguin.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3771 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-24[PATCH] libpayload: rename config.h to libpayload-config.hJordan Crouse
Rename the generated config file to libpayload-config.h to differenciate it from other config.h files. Move the default location of the file to $(src)/include so that LIBPAYLOAD_PREFIX= users can access the file without staging it. Signed-off-by: Jordan Crouse <jordan@cosmicpenguin.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3768 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-11Signed-off-by: Robert Millan <rmh@aybabtu.com>Robert Millan
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3749 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-22Fix ordering problem in the libpayload Makefile. The include ofUwe Hermann
'include util/kconfig/Makefile' must come before certain pattern rules for compilation of kconfig files, otherwise the build would break in most situations. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3686 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-22ouch. something went wrong with applying that old patchStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3684 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-22This has been sitting here since a looong time.Stefan Reinauer
* allow versions of "install" that don't know -D * install libpayload .config and config.h to the target. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3683 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-21[PATCH] fix video console initJordan Crouse
Move console_add_output-driver() inside the for() loop Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3681 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-20[PATCH] libpayload: Add multiboot supportJordan Crouse
Make libpayload applications multiboot compatible. Add the multiboot OS table and grok the loader table, especially the memory map and the command line. This makes libpayload applications loadable by GRUB. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-20[PATCH] libpayload: Use gcc to compile assembly filesJordan Crouse
Using gcc to compile assembly files lets us use preprocessor directives. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3671 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-231.Patrick Georgi
Preset CC to gcc in Makefile. There are some $(shell $(CC) ...) invocations with GCC specific options, so that shouldn't hurt. 2. Replace stdbool.h include in util/kconfig/expr.h by a custom implementation of booleans. This is okay as these booleans are purely internal. It's necessary because there's some disagreement between the Solaris headers and GCC on Solaris, about when stdbool.h is appropriate. 3. Remove stdbool.h include from util/kconfig/zconf.tab.c_shipped. This file includes expr.h already, so it picks up the right set of primitives, without duplicating the special case for Solaris. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3592 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-02This patch adds USB capabilities to libpayload. It requires somePatrick Georgi
memalign implementation (eg. the one I sent yesterday). Features: - UHCI controller driver - UHCI root hub driver - USB MSC (Mass Storage Class) driver - skeleton of a USB HID driver (requires better interrupt transfer handling, which is TODO) - skeleton of a USB hub driver (needs several blank spots filled in, eg. power management. Again: TODO) OHCI and EHCI are not supported, though OHCI support should be rather easy as the stack provides reasonable abstractions (or so I hope). EHCI will probably be more complicated. Isochronous transfers (eg. webcams, audio stuff, ...) are not supported. They can be, but I doubt we'll have a reason for that in the boot environment. The MSC driver was tested against a couple of USB flash drives, and should be reasonably tolerant by now. But I probably underestimate the amount of bugs present in USB flash drives, so feedback is welcome. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3560 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-28libpayload: Expand doxygen definitionsJordan Crouse
Expand libpayload.h to include a main page and add individual groups for the API functions - this adds the Modules tab to the doxygen output. Specify the INPUT list rather then the EXCLUDE list of directories to omit random .c files that we don't want. Add clean targets to the makefile to clean doxygen files only. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3545 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-28fix libpayload build dependencies (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3544 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-27Add a Doxygen config file and a Makefile target 'doxy' or 'doxygen' whichUwe Hermann
generate API documentation (HTML) for libpayload in a 'doxygen' subdirectory. A 'make clean' will remove this directory again. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3540 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-26How could -ffreestanding slip through here. Required because libpayload is notStefan Reinauer
going to run under an OS. (trivial) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3537 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-08Update the kconfig copy in libpayload to a much more recent one. AmongUwe Hermann
other things this supposedly also fixes a number of build issues on Mac OS X. This is more or less the same version (i.e. equally recent) as we have in coreinfo and buildrom now. This patch also includes the libintl.h fix from r3475 (coreinfo). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-08-07fix stack protection detection with Jordan's suggestionStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3478 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-10libpayload: Avoid .svn files in the header installJordan Crouse
Slight tweak to to the install target to avoid copying .svn files. Trivial self ack. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3229 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-09libpayload: Implement gcc wrappers for libpayloadJordan Crouse
libpayload uses a ton of flags and other scary gcc and ld options. These wrappers hide most of that from the user, so that using libpayload is as easy as lpgcc -o hello hello.c Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3226 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-03Add a SHA-1 implementation to libpayload.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3212 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-27Drop -Os in libpayload for now, it causes run-time problems for someUwe Hermann
strange reason (broken curses/VGA display, maybe others). It'll be re-enabled when we fixed that. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3190 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-20Fix code to allow usage of -Wall in libpayload and the sample (trivial).Uwe Hermann
This even fixes two bugs: - get_cpu_speed() didn't return a value. - The line win->_color - PAIR_NUMBER(0); should actually be win->_color = PAIR_NUMBER(0); Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3182 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-20libpayload: Add -Os to the CFLAGSJordan Crouse
Adding -Os to the CFLAGS gains us about 25% smaller code (give or take). Unfortunately, it exposes a strange issue where strcpy() suddenly goes missing - we think that strcpy() is being provided by libgcc, and that for some reason, -Os changes the beahavior. Oh, well - add a quick strcpy() function and we're good. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3175 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-19libpayload: The initial chunk of code writen by AMDJordan Crouse
This is the initial chunk of code written by me and copyrighted by AMD. Includes everything but a few files that we pulled from outside sources. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3170 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 08:48:02 +0000