summaryrefslogtreecommitdiff
path: root/payloads/libpayload/Makefile.inc
AgeCommit message (Collapse)Author
2015-03-21libpayload: arch/mips: Add basic MIPS architecture supportIonela Voinescu
Add the basic build infrastructure and architectural support required to build for targets using the MIPS architecture. This will require the addition of cache maintenance. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA with Depthcharge as payload; successfully executed payload. BRANCH=none Change-Id: I75cfd0536860b6d84b53a567940fe6668d9b2cbb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 758c8cb9a6846e6ca32be409ec5f7a888ac9c888 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Change-Id: I0b9af983bf5032335a519ce2510a0b3aca082edf Original-Reviewed-on: https://chromium-review.googlesource.com/219740 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8741 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-01-09libpayload: Add remote GDB supportJulius Werner
This patch adds the ability to attach a GDB host through the UART to a running payload. Libpayload implements a small stub that can parse and respond to the GDB remote protocol and provide the required primitives (reading/writing registers/memory, etc.) to allow GDB to control execution. The goal of this implementation is to be as small and uninvasive as possible. It implements only the minimum amount of primitives required, and relies on GDB's impressive workaround capabilities (such as emulating breakpoints by temporarily replacing instructions) for the more complicated features. This way, a relatively tiny amount of code on the firmware side opens a vast range of capabilities to the user, not just in debugging but also in remote-controlling the firmware to change its behavior (e.g. through GDBs ability to modify variables and call functions). By default, a system with the REMOTEGDB Kconfig will only trap into GDB when executing halt() (including the calls from die_if(), assert(), and exception handlers). In addition, payloads can manually call gdb_enter() if desired. It will print a final "Ready for GDB connection." on the serial, detach the normal serial output driver and wait for the commands that GDB starts sending on attach. Based on original implementation by Gabe Black <gabeblack@chromium.org>. BUG=chrome-os-partner:18390 TEST=Boot a GDB enabled image in recovery mode (or get it to hit a halt()), close your terminal, execute '<toolchain>-gdb --symbols /build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory ~/trunk/src/third_party/coreboot/payloads/libpayload --directory ~/trunk/src/platform/depthcharge --directory ~/trunk/src/platform/vboot_reference --ex "target remote <cpu_uart_pty>"' and behold the magic. (You can also SIGSTOP your terminal's parent shell and the terminal itself, and SIGCONT them in reverse order after GDB exits. More convenient wrapper tools to do all this automatically coming soon.) Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202563 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b Reviewed-on: http://review.coreboot.org/8119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-09libpayload: Add support for arm64 in libpayloadFurquan Shaikh
Basic support for arm64 is enabled in libpayload. Features added: 1) mem* operations in assembly. 2) Basic exception handling and support for testing exceptions. 3) Caching support. Tested with arm64-generic board compilation. BUG=None BRANCH=None TEST=Compilation successful Original-Change-Id: I4e86301f9c6383abc078e2b70071fb84bd6e4741 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/187067 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit a70d13f3d225535843ab352290eab2e1ec7a9b4b) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie3affe6a2bdd4fed3058de739d4c6aa573e5b251 Reviewed-on: http://review.coreboot.org/8063 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2014-12-31libpayload: Do not tolerate compilation warnings when buildingVadim Bendebury
Make sure the build breaks in case of warnings. BUG=none TEST= All builds succeed with the restored patch and fail when a compilation warning is thrown. Original-Change-Id: I9bdcd8938f59913e4ba86df5e4921b3f821ef920 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200110 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 16dde875950d6806cc770cdbee4d3ff456ed6f02) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I86988f8d3f1acaa6ceeabdcbfa3cede1e67c28fe Reviewed-on: http://review.coreboot.org/7911 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-09-29libpayload: Build libpayload with debugging info turned up all the way.Gabe Black
Pass -ggdb3 to the compiler when building libpayload, -ggdb so that it uses "the most expressive format available", and 3 so that the debugging level is set to 3, the highest value currently supported. The debugging information can be stripped by the payload consuming the library, and will definitely be stripped by cbfstool when installing that payload into an image. Change-Id: Ifd6c4a928fbb0b9fa9b3b2e0ea298abff31baf3b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/180252 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit dc04daaf099c53c57508b66e08f40945345a56ca) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6980 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-09-08ARM: Generalize armv7 as arm.Gabe Black
There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2014-09-04build: add what-jenkins-does targetPatrick Georgi
This target does (pretty much) exactly the same what jenkins is doing on our build nodes: - complete abuild run of our tree with a given payload - building all libpayload configs we ship - building the cbmem utility In fact at some point we could tell jenkins to just run this command. For debugging, pass along V and Q variables so inner make processes are slightly more noisy on demand. Change-Id: Ib515170603a151cc3c3b10c743f1468a9875dbdc Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6797 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-05libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig.Gabe Black
When libpayload header files are included in the payload itself, it's possible that the payloads config settings will conflict with the ones in libpayload. It's also possible for the libpayload config settings to conflict with the payloads. To avoid that, the libpayload config settings have _LP_ (for libpayload) added to them. The symbols themselves as defined in the Config.in files are still the same, but the prefix added to them is now CONFIG_LP_ instead of just CONFIG_. Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65303 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6427 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-01-08libpayload: add junit.xml build targetPatrick Georgi
It builds all defconfigs/* and logs the results in junit.xml, suitable for consumption by jenkins Change-Id: I86c4022851b47820c95359b2ea9b735a77b1bc2c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4551 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-12-05libpayload: Clean up CFLAGSStefan Reinauer
- Add -ffreestanding and -fomit-frame-pointer for all platforms. - Add ARMv7 specific flags to the armv7 Makefile Change-Id: I71ab1b096e505940cc20c266bccd43917bcfad3a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56104 Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4317 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-26libpayload: Drop PowerPC architectureStefan Reinauer
This was never completed / working and we have the working ARMv7 port for an architecture template, so get rid of this dead code. Change-Id: Ic2c1267ee5546dd6e1b63220c263b2fa86c8ae33 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56065 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4235 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-18libpayload: Don't sneak in compiler includesStefan Reinauer
The way we got to include the compiler includes was kind of whacky. Instead of mixing in potentially problematic headers, make libpayload self-contained by adding some missing header files. Also clean up conflicting definitions of size_t throughout the tree. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I0ad1194de1a00b7133c5477c00eb167d63a2ee85 Reviewed-on: https://gerrit.chromium.org/gerrit/47608 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3058 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18libpayload: Fix the config file dependency in the Makefile templateGabe Black
The template had a dependency on config.h which was correct for coreboot, where this build system originally came from, but not for libpayload which uses the differently named libpayload-config.h, presumably to avoid colliding with a config.h used by the actual payload. Because libpayload-config.h is now effectively a dependency of everything, it doesn't have to be added piecemeal in Makefile.inc. Change-Id: I01f20d363cb1393fa1cdcf0dc916670db90294e9 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2763 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Start using only internal and compiler headers.Ronald G. Minnich
When building other payloads with lpgcc the -nostdinc flag was injected into CFLAGS, but when building libpayload itself some headers were being used from the host system. This change puts -nostdinc into the Makefile and xcompile script, fixes up one include path in include/inttypes.h, adds the compiler provided include directory to the include search path, and deletes the two now redundant stdint.h files. BUG=None TEST=With this and other changes, built libpayload and depthcharge for Daisy, Link, and Fox. BRANCH=None Change-Id: Ia7817fceab5297cd82ccc0d392330de0df61980e Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-14libpayload; put the ldscript into an arch-dependent directory pathRonald G. Minnich
Since it's utterly architecture-dependent, put it in arch/x86. Avoid the temptation to make yet another directory with just one file in it. Fix the makefile to pick up the proper arch-dependent script. Change-Id: I21ea02551a97bdcbc38419714f3b38cf8335c178 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2389 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-25libpayload: use $(DOTCONFIG) instead of .configStefan Reinauer
When overriding the DOTCONFIG variable, make install will fail in libpayload. Change-Id: I332be3a4ca2620a32a6f5fbe683e6c71f0d6a9e9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2178 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-12-14libpayload: Initial ARMv7 portStefan Reinauer
This compiles, but it's not tested yet. Change-Id: I2f73a814649aa36c39af3e77cefd8a968671f5c0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2035 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: rename i386 to x86Stefan Reinauer
Change-Id: Ia9170bd3d04e76dbf9321ca7ea4be23b5e468d21 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2033 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-30Change TARGET_I386 to ARCH_X86David Hendricks
This renames TARGET_I386 to ARCH_X86 to make it more uniform with other parts of the codebase, e.g. cbfs_core.h from cbfstool. Change-Id: I1babcc941245ed1dde0478a21828766759373a42 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1961 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-11-12libpayload: Use EXTRA_CFLAGS for additional GCC optionsGabe Black
-CFLAGS = $(INCLUDES) -O2 -pipe -g +CFLAGS = $(EXTRA_CFLAGS) $(INCLUDES) -Os -pipe Change-Id: Icb228d173312a974746e72b6bbae059103b837fc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1723 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-08-04libpayload: Add liblzma, libcbfsPatrick Georgi
Add cbfs core from coreboot into libpayload, and to support lzma decode, add coreboot's lzma code, too. Carl-Daniel agreed to relicense the lzmadecode wrapper as BSD-l, solving licensing problems. Change-Id: Id28990fe7e951d99447e265a4880d70a8f208dd2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-04libpayload: Add PDCurses and ncurses' libform/libmenuPatrick Georgi
PDCurses provides an alternative implementation of the curses library standard in addition to tinycurses. Where tinycurses is really tiny, PDCurses is more complete and provides virtually unlimited windows and the full API. The PDCurses code is brought in "vanilla", with all local changes residing in curses/pdcurses-backend/ In addition to a curses library, this change also provides libpanel (as part of the PDCurses code), and libform and libmenu which were derived from ncurses-5.9. As they rely on ncurses internals (and PDCurses is not ncurses), more changes were required for these libraries to work. The build system is extended to install the right set of header files depending on the selected curses implementation. Change-Id: I9e5b920f94b6510da01da2f656196a993170d1c5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/106 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-21Libpayload: default DESTDIR for 'make install'Tadas Slotkus
If you would try download FILO via svn, then you probably get error message about libpayload install. This enables manually installing libpayload in legacy style :) Change-Id: I9f52be939303c5913611f21477d681e11d286382 Signed-off-by: Tadas Slotkus <devtadas@gmail.com> Reviewed-on: http://review.coreboot.org/102 Tested-by: build bot (Jenkins) Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-30Use coreboot build system for libpayload, too.Patrick Georgi
This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 21:03:56 +0000